Remove the use of regime_is_secure from arm_tr_init_disas_context.
Instead, provide the value of v8m_secure directly from tb_flags.
Rather than use regime_is_secure, use the env->v7m.secure directly,
as per arm_mmu_idx_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from v7m_read_half_insn, using
the new parameter instead.
As it happens, both callers pass true, propagated from the argument
to arm_v7m_mmu_idx_for_secstate which created the mmu_idx argument,
but that is a detail of v7m_handle_execute_nsc we need not expose
to the callee.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Retain the existing get_phys_addr interface using the security
state derived from mmu_idx. Move the kerneldoc comments to the
header file where they belong.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from regime_translation_disabled,
using the new parameter instead.
This fixes a bug in S1_ptw_translate and get_phys_addr where we had
passed ARMMMUIdx_Stage2 and not ARMMMUIdx_Stage2_S to determine if
Stage2 is disabled, affecting FEAT_SEL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass the correct stage2 mmu_idx to regime_translation_disabled,
which we computed afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the use of regime_is_secure from get_phys_addr_lpae,
using the new parameter instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the stage2 call to get_phys_addr_lpae should never set
attrs.secure when given a non-secure input, it's just as easy
to make the final update to attrs.secure be unconditional and
false in the case of non-secure input.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221007152159.1414065-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The starting security state comes with the translation regime,
not the current state of arm_is_secure_below_el3().
Create a new local variable, s2walk_secure, which does not need
to be written back to result->attrs.secure -- we compute that
value later, after the S2 walk is complete.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221001162318.153420-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
openpower.xyz was retired some time ago. The OpenBMC Jenkins is where
images can be found these days.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20221004050042.22681-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Updates write_scr() to allow setting SCR_EL3.EnTP2 when FEAT_SME is
implemented. SCR_EL3 being a 64-bit register, valid_mask is changed
to uint64_t and the SCR_* constants in target/arm/cpu.h are extended
to 64-bit so that masking and bitwise not (~) behave as expected.
This enables booting Linux with Trusted Firmware-A at EL3 with
"-M virt,secure=on -cpu max".
Cc: qemu-stable@nongnu.org
Fixes: 78cb977666 ("target/arm: Enable SME for -cpu max")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221004072354.27037-1-jerome.forissier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Occasionally the KVM_CREATE_VM ioctl can return EINTR, even though
there is no pending signal to be taken. In commit 94ccff1338
we added a retry-on-EINTR loop to the KVM_CREATE_VM call in the
generic KVM code. Adopt the same approach for the use of the
ioctl in the Arm-specific KVM code (where we use it to create a
scratch VM for probing for various things).
For more information, see the mailing list thread:
https://lore.kernel.org/qemu-devel/8735e0s1zw.wl-maz@kernel.org/
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-id: 20220930113824.1933293-1-peter.maydell@linaro.org
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
=1vZ4
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu into staging
testing, gdbstub, plugin and gitdm updates
- cleanup scripts/ci/setup in advance of ppc64 runner
- ensure detected gdb reported to TCG tests
- update hexagon container with build deps
- move alpine container to tagged release
- fix overflow during qos-test test tree iteration
- allow bios blobs to be built with test cross compilers
- introduce monitor_puts for plain strings
- share disas code between monitor and plugins
- fix bug in execlog plugin
- add more tcg plugin documentation, reorg
- fix link to semihosting spec
- re-factor gdbstub to use AccelClass/Ops
- many gitdm updates
- fix race with plugin mutex lock and linux-user fork()
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmM+s+YACgkQ+9DbCVqe
# KkSDwgf/Qj0OScOr5Bfw3/KAV0/SFL1vHISb2r5qZVG4DvdY/c/sitPBHPJ8N5jQ
# 918M8AiI3+4Mb/GwkdYBEyWgVZ5ELOkJTObypa5pwmF1K/xDUlG7ZRmJ9+xkJ44Q
# TmrVLQyw6d907B2u+DfqX68AYYnto1yQT/eUo6TiLdIJ5NXIYRn5u34snG9qWHja
# b/Dp7DxnoJMS1EhlMhukekCHGGNUeYn4ewIKbsG1EouH5PndzrvP8LRAcWyxv0m4
# tD2bEAHCMKqTqefkNgG7GCO3HND1JBfWdckx3OD4hBnMnuNtsZBL23QN7MDytgnv
# 0JnYSwkWZCuMIt7oKCOXLUbCjQG97Q==
# =1vZ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Oct 2022 06:54:30 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-gdbstub-plugins-gitdm-061022-3' of https://github.com/stsquad/qemu: (52 commits)
plugins: add [pre|post]fork helpers to linux-user
contrib/gitdm: add Université Grenoble Alpes
contrib/gitdm: add Simon to individual contributors
contrib/gitdm: add China Telecom to the domain map
contrib/gitdm: add ISCAS to the academics group
contrib/gitdm: add WANG Xuerui to individual contributers
contrib/gitdm: add Paul to individual contributors
contrib/gitdm: add mapping for Loongson Technology
accel/kvm: move kvm_update_guest_debug to inline stub
gdbstub: move guest debug support check to ops
gdbstub: move breakpoint logic to accel ops
gdbstub: move sstep flags probing into AccelClass
gdbstub: move into its own sub directory
semihosting: update link to spec
docs/devel: document the test plugins
contrib/plugins: reset skip when matching in execlog
docs/devel: move API to end of tcg-plugins.rst
docs/devel: clean-up qemu invocations in tcg-plugins
plugins: Assert mmu_idx in range before use in qemu_plugin_get_hwaddr
plugins: extend execlog to filter matches
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
again to the academic group map.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220926134609.3301945-7-alex.bennee@linaro.org>
Please confirm this is the correct mapping for you.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Simon Safar <simon@simonsafar.com>
Message-Id: <20220926134609.3301945-2-alex.bennee@linaro.org>
The English website (http://english.is.cas.cn/) in on a slightly
different domain but has the same logo as http://www.iscas.ac.cn/.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20220929114231.583801-51-alex.bennee@linaro.org>
His blog confirms he is not affiliated with Loongson.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20220929114231.583801-50-alex.bennee@linaro.org>
Also map his old codesourcery address to his canonical address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paul Brook <paul@nowt.org>
Message-Id: <20220929114231.583801-49-alex.bennee@linaro.org>
Please confirm you are happy with this mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220929114231.583801-48-alex.bennee@linaro.org>
This removes the final hard coding of kvm_enabled() in gdbstub and
moves the check to an AccelOps.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-46-alex.bennee@linaro.org>
As HW virtualization requires specific support to handle breakpoints
lets push out special casing out of the core gdbstub code and into
AccelOpsClass. This will make it easier to add other accelerator
support and reduces some of the stub shenanigans.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-45-alex.bennee@linaro.org>
The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
This is in preparation of future refactoring as well as cleaning up
the source tree. Aside from the minor tweaks to meson and trace.h this
is pure code motion.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-43-alex.bennee@linaro.org>
The old link has moved but it seems the document is now hosted on
Arm's github along with a license update to CC-BY-SA-4.0.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-42-alex.bennee@linaro.org>
Although the test plugins are fairly basic they are still useful for
some things so we should document their existence.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-41-alex.bennee@linaro.org>
The purpose of the matches was to only track the execution of
instructions we care about. Without resetting skip to the value at the
start of the block we end up dumping all instructions after the match
with the consequent load on the instrumentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-40-alex.bennee@linaro.org>
The API documentation is quite dry and doesn't flow nicely with the
rest of the document. Move it to its own section at the bottom along
with a little leader text to remind people to update it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-39-alex.bennee@linaro.org>
We currently have the final binaries in the root of the build dir so
the build prefix is superfluous. Additionally add a shell prompt to be
more in line with the rest of the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-38-alex.bennee@linaro.org>
Coverity reports out-of-bound accesses here. This should be a
false positive due to how the index is decoded from MemOpIdx.
Fixes: Coverity CID 1487201
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20220401190233.329360-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-37-alex.bennee@linaro.org>
Sometimes the whole execlog is just two much so add the ability to
filter by instruction opcode or address.
[AJB: this shows for example
qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max \
-semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin -D plugin.out
the st1w SVE instruction is not instrumenting its stores.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20220929114231.583801-36-alex.bennee@linaro.org>
This gets especially confusing if you start plugging in host addresses
from a trace and you wonder why the output keeps changing. Report when
read_memory_func fails instead of blindly disassembling the buffer
contents.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-35-alex.bennee@linaro.org>
Rather than assembling our output piecemeal lets use the same approach
as the plugin disas interface to build the disassembly string before
printing it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-34-alex.bennee@linaro.org>
This helps us construct strings elsewhere before echoing to the
monitor. It avoids having to jump through hoops like:
monitor_printf(mon, "%s", s->str);
It will be useful in following patches but for now convert all
existing plain "%s" printfs to use the _puts api.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-30-alex.bennee@linaro.org>
s390-ccw remains a bit more complex, because the -march=z900 test is done
only for the native cross compiler. Otherwise, all that is needed is
to pass the (now mandatory) target argument to write_target_makefile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-29-alex.bennee@linaro.org>
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
Let write_target_makefile handle both host and container cross compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org>
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
Almost all invocations of run-test have either "$* on $(TARGET_NAME)"
or "$< on $(TARGET_NAME)" as the last argument. So provide a default
test name, while allowing an escape hatch for custom names.
As an additional simplification, remove the need to do shell quoting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-24-alex.bennee@linaro.org>
Make tests/tcg/ppc64le include tests/tcg/ppc64 instead of duplicating
the rules. Because the ppc64le vpath includes tests/tcg/ppc64 but
not vice versa, the tests have to be moved from tests/tcg/ppc64le/
to tests/tcg/ppc64.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-23-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-22-alex.bennee@linaro.org>
Instead of linking tests/tcg/Makefile.target into the build tree, name
the symbolic link "Makefile" and create it in every target subdirectory.
This makes it possible to just invoke "make" in tests/tcg subdirectories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-21-alex.bennee@linaro.org>
Remove the DOCKER_SCRIPT and TARGET variable from the Makefile invocation
for tests/tcg. For DOCKER_SCRIPT, resolve the path to docker.py in configure;
for TARGET, move it to config-$(TARGET).mak and use a symbolic link to break
the cycle.
The symbolic link is still needed because tests/tcg includes dummy config files
for targets that are not buildable. Once that is cleaned up, the symbolic link
will go away too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-20-alex.bennee@linaro.org>
In preparation for removing $(DOCKER_SCRIPT) from the tests/tcg configuration
files, have Make use the same container engine that had been probed at
configure time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-19-alex.bennee@linaro.org>
For now, return 1 for container-based compilers. This will change as
soon as ROMs will be buildable with them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-18-alex.bennee@linaro.org>
