This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With PC, there are 33 registers. Three per line lines up nicely
without overflowing 80 columns.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=DuZ8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging
Testing patches for 2018-08-16
# gpg: Signature made Thu 16 Aug 2018 09:34:43 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-tests-2018-08-16: (25 commits)
libqtest: Improve error reporting for bad read from QEMU
tests/libqtest: Improve kill_qemu()
libqtest: Rename qtest_FOOv() to qtest_vFOO() for consistency
libqtest: Replace qtest_startf() by qtest_initf()
libqtest: Enable compile-time format string checking
migration-test: Clean up string interpolation into QMP, part 3
migration-test: Clean up string interpolation into QMP, part 2
migration-test: Clean up string interpolation into QMP, part 1
migration-test: Make wait_command() cope with '%'
tests: New helper qtest_qmp_receive_success()
migration-test: Make wait_command() return the "return" member
tests: Clean up string interpolation around qtest_qmp_device_add()
cpu-plug-test: Don't pass integers as strings to device_add
tests: Clean up string interpolation into QMP input (simple cases)
tests: Pass literal format strings directly to qmp_FOO()
qobject: qobject_from_jsonv() is dangerous, hide it away
test-qobject-input-visitor: Avoid format string ambiguity
libqtest: Simplify qmp_fd_vsend() a bit
qobject: New qobject_from_vjsonf_nofail(), qdict_from_vjsonf_nofail()
qobject: Replace qobject_from_jsonf() by qobject_from_jsonf_nofail()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When read() from the qtest socket or the QMP socket fails or EOFs, we
report "Broken pipe" and exit(1). This commonly happens when QEMU
crashes. It also happens when QEMU refuses to run because the test
passed it bad arguments. Sadly, we neglect to report either.
Improve this by calling abort() instead of exit(1), so kill_qemu()
runs, and reports how QEMU died. This improves error reporting to
something like
/x86_64/device/introspect/list: Broken pipe
tests/libqtest.c:129: kill_qemu() detected QEMU death from signal 6 (Aborted) (dumped core)
Three exit() remain in libqtest.c:
* In qmp_response(), when we can't parse a QMP reply read from the QMP
socket. Change to abort() for consistency.
* In qtest_qemu_binary(), when QTEST_QEMU_BINARY isn't in the
environment. This can only happen before we start QEMU. Leave
alone.
* In qtest_init_without_qmp_handshake(), when the fork()ed child fails
to execlp(). Leave alone.
exit() elsewhere are unlikely due to QEMU dying on us. If that should
turn out to be wrong, we can move kill_qemu() from @abrt_hooks to
atexit() or something.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180815141945.10457-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Commit message tweaked slightly]
In kill_qemu() we have an assert that checks that the QEMU process
didn't dump core:
assert(!WCOREDUMP(wstatus));
Unfortunately the WCOREDUMP macro here means the resulting message
is not very easy to comprehend on at least some systems:
ahci-test: tests/libqtest.c:113: kill_qemu: Assertion `!(((__extension__ (((union { __typeof(wstatus) __in; int __i; }) { .__in = (wstatus) }).__i))) & 0x80)' failed.
and it doesn't identify what signal the process took. What's more,
WCOREDUMP is not reliable - in some cases, setrlimit() coupled with
kernel dump settings can result in the flag not being set. It's
better to log ALL death by signal, instead of caring whether a core
dump was attempted (although once we know a signal happened, also
mentioning if a core dump is present can be helpful).
Furthermore, we are NOT detecting EINTR (while EINTR shouldn't be
happening if we didn't install signal handlers, it's still better
to always be robust).
Finally, even non-signal death with a non-zero status is suspicious,
since qemu's SIGINT handler is supposed to result in exit(0).
Instead of using a raw assert, print the information in an
easier to understand way:
/i386/ahci/sanity: tests/libqtest.c:129: kill_qemu() detected QEMU death from signal 11 (Segmentation fault) (core dumped)
(Of course, the really useful information would be why the QEMU
process dumped core in the first place, but we don't have that
by the time the test program has picked up the exit status.)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180810132800.38549-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Core dump reporting and commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
13 of 13 C99 library function pairs taking ... or a va_list parameter
are called FOO() and vFOO(). In QEMU, we sometimes call the one
taking a va_list FOOv() instead. Bad taste. libqtest.h uses both
spellings. Normalize it to the standard spelling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-24-armbru@redhat.com>
qtest_init() creates a new QTestState, and leaves @global_qtest alone.
qtest_start() additionally assigns it to @global_qtest, but
qtest_startf() additionally assigns NULL to @global_qtest. This makes
no sense. Replace it by qtest_initf() that works like qtest_init(),
i.e. leaves @global_qtest alone.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-23-armbru@redhat.com>
qtest_qmp() & friends pass their format string and variable arguments
to qobject_from_vjsonf_nofail(). Unlike qobject_from_jsonv(), they
aren't decorated with GCC_FMT_ATTR(). Fix that to get compile-time
format string checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-22-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migration-test.c interpolates strings into JSON in a few places:
* migrate_set_parameter() interpolates string parameter @value as a
JSON number. Change it to long long. This requires changing
migrate_check_parameter() similarly.
* migrate_set_capability() interpolates string parameter @value as a
JSON boolean. Change it to bool.
* deprecated_set_speed() interpolates string parameter @value as a
JSON number. Change it to long long.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-21-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migrate() interpolates members into a JSON object. Change it to take
its extra QMP arguments as arguments for qdict_from_jsonf_nofail()
instead of a string containing JSON members.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-20-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migrate_recover() builds QMP input manually because wait_command()
can't interpolate. Well, it can since the previous commit. Simplify
accordingly.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-19-armbru@redhat.com>
wait_command() passes its argument @command to qtest_qmp_send().
Falls apart if @command contain '%'. Two ways to disarm this trap:
suppress interpretation of '%' by passing @command as argument to
format string "%s", or fix it by having wait_command() take the
variable arguments to go with @command. Do the latter.
This is another step towards compile-time format string checking
without triggering -Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-18-armbru@redhat.com>
Commit b21373d071 copied wait_command() from tests/migration-test.c
to tests/tpm-util.c. Replace both copies by new libqtest helper
qtest_qmp_receive_success(). Also use it to simplify
qtest_qmp_device_del().
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-17-armbru@redhat.com>
All callers of wait_command() are only interested in the success
response's "return" member. Lift its extraction into wait_command().
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-16-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the commit before previous.
qtest_qmp_device_add() and its wrappers interpolate into JSON as
follows:
* qtest_qmp_device_add() interpolates members into a JSON object.
* So do its wrappers qpci_plug_device_test() and usb_test_hotplug().
* usb_test_hotplug() additionally interpolates strings and numbers
into JSON strings.
Clean them up:
* Have qtest_qmp_device_add() take its extra device properties as
arguments for qdict_from_jsonf_nofail() instead of a string
containing JSON members.
* Drop qpci_plug_device_test(), use qtest_qmp_device_add()
directly.
* Change usb_test_hotplug() parameter @port to string, to avoid
interpolation. Interpolate @hcd_id separately.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-15-armbru@redhat.com>
test_plug_with_device_add_x86() plugs Haswell-i386-cpu and
Haswell-x86_64-cpu with device_add. It passes socket-id, core-id,
thread-id as JSON strings. The properties are actually integers.
test_plug_with_device_add_coreid() plugs power8_v2.0-spapr-cpu-core
and qemu-s390x-cpu with device_add. It passes core-id as JSON string.
The properties are actually integers.
Passing JSON string values to integer properties works only due to
device_add implementation accidents. Fix the test to pass JSON
numbers. While there, use %u rather than %i with unsigned int.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-14-armbru@redhat.com>
When you build QMP input manually like this
cmd = g_strdup_printf("{ 'execute': 'migrate',"
"'arguments': { 'uri': '%s' } }",
uri);
rsp = qmp(cmd);
g_free(cmd);
you're responsible for escaping the interpolated values for JSON. Not
done here, and therefore works only for sufficiently nice @uri. For
instance, if @uri contained a single "'", qobject_from_vjsonf_nofail()
would abort. A sufficiently nasty @uri could even inject unwanted
members into the arguments object.
Leaving interpolation into JSON to qmp() is more robust:
rsp = qmp("{ 'execute': 'migrate', 'arguments': { 'uri': %s } }", uri);
It's also more concise.
Clean up the simple cases where we interpolate exactly a JSON value.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-13-armbru@redhat.com>
The qmp_FOO() take a printf-like format string. In a few places, we
assign a string literal to a variable and pass that instead of simply
passing the literal. Clean that up.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-12-armbru@redhat.com>
qobject_from_jsonv() takes ownership of %p arguments. On failure, we
can't generally know whether we failed before or after %p, so
ownership becomes indeterminate. To avoid leaks, callers passing %p
must terminate on error, e.g. by passing &error_abort. Trap for the
unwary; document and give the function internal linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-11-armbru@redhat.com>
When visitor_input_test_init_internal()'s argument @ap is null, then
@json_string is interpreted literally, else it's gets %-escapes
interpolated. This is awkward.
One caller always passes null @ap, and the others never do. Lift the
building of the QObject into the callers, where it can be done without
such ambiguity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-10-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-9-armbru@redhat.com>
Every printf()-like function sooner or later needs its vprintf()-like
buddy. The next commit will need qobject_from_jsonf_nofail()'s buddy,
and qdict_from_jsonf_nofail()'s buddy will be used later in this
series. Add both.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-8-armbru@redhat.com>
Commit ab45015a96 "qobject: Let qobject_from_jsonf() fail instead of
abort" fails to accomplish its stated aim: the function can still
abort due to its use of &error_abort.
Its rationale for letting it fail is that all remaining users cope
fine with failure. Well, they're just fine with aborting, too; it's
what they do on failure.
Simply reverting the broken commit would bring back the unfortunate
asymmetry between qobject_from_jsonf() and qobject_from_jsonv(): one
aborts, the other returns null. So also rename it to
qobject_from_jsonf_nofail().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-7-armbru@redhat.com>
We have two flavors of vararg usage in qtest: qtest_hmp() etc. work
like sprintf(), and qtest_qmp() etc. work like qobject_from_jsonf().
Spell that out in the comments.
Also add GCC_FMT_ATTR() to qtest_hmp() etc. so that the compiler can
flag incorrect use.
We have some cleanup work to do before we can do the same for
qtest_qmp() etc. This would get us the same better-than-nothing
checking we already have for qobject_from_jsonf(): common incorrect
uses of supported conversion specifications will be flagged
(e.g. passing a double for %d), but use of unsupported ones won't.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, comment wording tweaked, commit message rewritten]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180806065344.7103-6-armbru@redhat.com>
qtest_qmp_discard_response(...) is shorthand for
qobject_unref(qtest_qmp(...), except it's not actually shorter.
Moreover, the presence of these functions encourage sloppy testing.
Remove them from libqtest. Add them as macros to the tests that use
them, with a TODO comment asking for cleanup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-5-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
qtest_init() still uses the qtest_qmp_discard_response(s, "") hack to
receive the greeting, even though we have qtest_qmp_receive() since
commit 66e0c7b187. Put it to use.
Bonus: gets rid of an empty format string. A step towards
compile-time format string checking without triggering
-Wformat-zero-length.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-4-armbru@redhat.com>
qtest_qmp_device_del() still uses the qmp("") hack to receive a
message, even though we have qmp_receive() since commit 66e0c7b187.
Put it to use.
Bonus: gets rid of empty format strings. A step towards compile-time
format string checking without triggering -Wformat-zero-length.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-3-armbru@redhat.com>
The functions to receive messages are called qtest_qmp_receive() and
qmp_receive(), qmp_fd_receive(). The ones to send messages are called
qtest_async_qmp(), qtest_async_qmpv(), qmp_async(), qmp_fd_send(),
qmp_fd_sendv(). Inconsistent. Rename the *_async* ones to
qmp_send(), qtest_qmp_send(), qtest_qmp_vsend(). Rename
qmp_fd_sendv() to qmp_fd_vsend().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-2-armbru@redhat.com>
- aio fixes by me
- nvme fixes by Paolo and me
- test improvements by Peter, Phil and me
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAltzme8QHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxl67B/4vLQupmbVXmRaeU3ZqL15tDyXQbTEbWpYo
V04uCeSPe/BlYH0k2VU5Rlrq0gFFlEqTYbw8VOmIjaXj6DlmQRBVaDM0m5q2lc4a
UAgJ4fmFiduTKaYpZ64POI0EGBCdzwdwlh6WW27jTwV8G9Zw3ppCvVv88t397qKF
pCvY+tClOoAZG8No6AI20WUekuHDqE+oeSrRiMYv0zyrP0bNiinvEKartcBvOvH9
iSMv1MOomw21Q+nwMzpe2dkkQU3UR+rfFokJFpjFclYUxP6soTdoF4JLm1gNdOz4
UE+LpreEQ3rPUz2+2ytsVBQ2XQkSIvnX6P8ZS2KPiR2IgXeoG70O
=R9Vh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-and-testing-pull-request' into staging
Block and testing patches for 3.1
- aio fixes by me
- nvme fixes by Paolo and me
- test improvements by Peter, Phil and me
# gpg: Signature made Wed 15 Aug 2018 04:11:43 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-and-testing-pull-request:
aio-posix: Improve comment around marking node deleted
tests/vm: Add vm-build-all/vm-clean-all in help text
tests/vm: Use make's --output-sync option
tests/vm: Bump guest RAM up from 2G to 4G
tests/vm: Propagate V=1 down into the make inside the VM
tests/vm: Pass the jobs parallelism setting to 'make check'
tests: vm: Add vm-clean-all
tests: Add centos VM testing
tests: Allow overriding archive path with SRC_ARCHIVE
tests: Add an option for snapshot (default: off)
docker: Install more packages in centos7
aio: Do aio_notify_accept only during blocking aio_poll
aio-posix: Don't count ctx->notifier as progress when polling
nvme: simplify plug/unplug
nvme: Fix nvme_init error handling
tests/vm: Add flex and bison to the vm image
tests/vm: Only use -cpu 'host' if KVM is available
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Implement more of ARMv6-M support
* Support direct execution from non-RAM regions;
use this to implmeent execution from small (<1K) MPU regions
* GICv2: implement the virtualization extensions
* support a virtualization-capable GICv2 in the virt and
xlnx-zynqmp boards
* arm: Fix return code of arm_load_elf() so we can detect
failure to load the file correctly
* Implement HCR_EL2.TGE ("trap general exceptions") bit
* Implement tailchaining for M profile cores
* Fix bugs in SVE compare, saturating add/sub, WHILE, MOVZ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZGAS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180814' into staging
target-arm queue:
* Implement more of ARMv6-M support
* Support direct execution from non-RAM regions;
use this to implmeent execution from small (<1K) MPU regions
* GICv2: implement the virtualization extensions
* support a virtualization-capable GICv2 in the virt and
xlnx-zynqmp boards
* arm: Fix return code of arm_load_elf() so we can detect
failure to load the file correctly
* Implement HCR_EL2.TGE ("trap general exceptions") bit
* Implement tailchaining for M profile cores
* Fix bugs in SVE compare, saturating add/sub, WHILE, MOVZ
# gpg: Signature made Tue 14 Aug 2018 17:23:38 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180814: (45 commits)
target/arm: Fix typo in helper_sve_movz_d
target/arm: Reorganize SVE WHILE
target/arm: Fix typo in do_sat_addsub_64
target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzw
target/arm: Implement tailchaining for M profile cores
target/arm: Restore M-profile CONTROL.SPSEL before any tailchaining
target/arm: Initialize exc_secure correctly in do_v7m_exception_exit()
target/arm: Improve exception-taken logging
target/arm: Treat SCTLR_EL1.M as if it were zero when HCR_EL2.TGE is set
target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO}
target/arm: Honour HCR_EL2.TGE when raising synchronous exceptions
target/arm: Honour HCR_EL2.TGE and MDCR_EL2.TDE in debug register access checks
target/arm: Mask virtual interrupts if HCR_EL2.TGE is set
arm: Fix return code of arm_load_elf
arm/virt: Add support for GICv2 virtualization extensions
xlnx-zynqmp: Improve GIC wiring and MMIO mapping
intc/arm_gic: Improve traces
intc/arm_gic: Implement maintenance interrupt generation
intc/arm_gic: Implement gic_update_virt() function
intc/arm_gic: Implement the virtual interface registers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the various error classes were removed prior to the 1.2 release.
Remove mentions of the error classes which did not make it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function returns a BDS's driver-specific options, excluding also
those from its children. Since we have just removed all children
options from bs->options there's no need to do this last step.
We allow references to children, though ("backing": "node0"), so those
we still have to remove.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_reopen() succeeds then bs->explicit_options is updated with
the new values, but bs->options never changes.
Here's an example:
{ "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "hd0",
"overlap-check": "all",
"file": {
"driver": "file",
"filename": "hd0.qcow2"
}
}
}
After this, both bs->options and bs->explicit_options contain
"overlap-check": "all".
Now let's change that using qemu-io's reopen command:
(qemu) qemu-io hd0 "reopen -o overlap-check=none"
After this, bs->explicit_options contains the new value but
bs->options still keeps the old one.
This patch updates bs->options after a BDS has been successfully
reopened.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a bdrv_reopen_multiple() call fails, then the explicit_options
QDict has to be deleted for every entry in the reopen queue. This must
happen regardless of whether that entry's bdrv_reopen_prepare() call
succeeded or not.
This patch simplifies the cleanup code a bit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When bdrv_open_inherit() opens a BlockDriverState the options QDict
can contain options for some of its children, passed in the form of
child-name.option=value
So while each child is opened with that subset of options, those same
options remain stored in the parent BDS, leaving (at least) two copies
of each one of them ("child-name.option=value" in the parent and
"option=value" in the child).
Having the children options stored in the parent is unnecessary and it
can easily lead to an inconsistent state:
$ qemu-img create -f qcow2 hd0.qcow2 10M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive file=hd2.qcow2,node-name=hd2,backing.node-name=hd1
This opens a chain of images hd0 <- hd1 <- hd2. Now let's remove hd1
using block_stream:
(qemu) block_stream hd2 0 hd0.qcow2
After this hd2 contains backing.node-name=hd1, which is no longer
correct because hd1 doesn't exist anymore.
This patch removes all children options from the parent dictionaries
at the end of bdrv_open_inherit() and bdrv_reopen_queue_child().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function extracts all options from a QDict starting with a
certain prefix and puts them in a new QDict.
We'll have a couple of cases where we simply want to discard those
options instead of copying them, and that's what this patch does.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_close handler is optional after previous commit, no needs to keep
empty functions more.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the convert command is creating an output file that needs
secrets, we need to ensure those secrets are passed to both the
blk_new_open and bdrv_create API calls.
This is done by qemu-img extracting all opts matching the name
suffix "key-secret". Unfortunately the code doing this was run after the
call to bdrv_create(), which meant the QemuOpts it was extracting
secrets from was now empty.
Previously this worked by luks as a bug meant the "key-secret"
parameters were not purged from the QemuOpts. This bug was fixed in
commit b76b4f6045
Author: Kevin Wolf <kwolf@redhat.com>
Date: Thu Jan 11 16:18:08 2018 +0100
qcow2: Use visitor for options in qcow2_create()
Exposing the latent bug in qemu-img. This fix simply moves the copying
of secrets to before the bdrv_create() call.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.
While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.
So just check for this scenario and error out.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
blockdev-add fails if an invalid node name is given, so we should
document what a valid node name even is.
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cong Li <coli@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
This reinstates commit 6266e900b8,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
We removed all options from the 'deprecated' array, so the code is dead
and can be removed as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
