Allocate timer once, at init time, instead of allocating/freeing
it all the time when starting/stopping the bus. Simplifies the
code, also fixes bugs (memory leak) due to missing checks whenever
the time is already allocated or not.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pid can be gotten from uhci device memory in uhci_handle_td(),
so the guest can trigger assert qemu if we get an invalid pid.
And the uhci spec 2.1.2 tells us The Host Controller sets Host
Controller Process Error bit to 1 when it detects a fatal error
and indicates that the Host Controller suffered a consistency
check failure while processing a Transfer Descriptor. An example
of a consistency check failure would be finding an illegal PID
field while processing the packet header portion of the TD.
When this error occurs, the Host Controller clears the Run/Stop
bit in the Command register to prevent further schedule execution.
We'd better to set UHCI_STS_HCPERR and kick an interrupt, check
the pid value at the first of uhci_handle_td function.
https://bugzilla.redhat.com/show_bug.cgi?id=1070027
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1455867238-4720-1-git-send-email-arei.gonglei@huawei.com
[ applied minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets,
the USB Net device emulator uses a fixed length(4096) data buffer.
The incoming informationBufferOffset & Length combination could
overflow and cross that range. Check control message buffer
offsets and length to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-3-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets, the USB Net
device emulator uses a fixed length(4096) data buffer. The incoming
packet length could exceed this limit. Add a check to avoid it.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-2-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TUSB6010 is a USB controller (as the name suggests). Move it from
hw/timer (where it was accidentally filed in 2013 when we moved
everything out of hw/) to hw/usb.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455883404-10976-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets, the USB Net
device emulator checks to see if the USB configuration descriptor
object is of RNDIS type(2). But it does not check if it is null,
which leads to a null dereference error. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455188480-14688-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
After clearing the status register we also have to update the irq line
status. Otherwise a irq which happends to be pending at reset time
causes a interrupt storm. And the guest can't stop as the status
register doesn't indicate any pending interrupt.
Both NetBSD and FreeBSD hang on shutdown because of that.
Cc: qemu-stable@nongnu.org
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1453203884-4125-1-git-send-email-kraxel@redhat.com
While processing isochronous transfer descriptors(iTD), the page
select(PG) field value could lead to an OOB read access. Add
check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1453233406-12165-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-20-git-send-email-peter.maydell@linaro.org
Done with this Coccinelle semantic patch
@@
expression FMT, E1, E2;
expression list ARGS;
@@
- error_setg(E1, FMT, ARGS, error_get_pretty(E2));
+ error_propagate(E1, E2);/*###*/
+ error_prepend(E1, FMT/*@@@*/, ARGS);
followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().
We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty(). This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints. It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
On suspend, if a SOF interrupt is raised between the stop of the
device processing and the change of the device internal state to
OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this
interrupt is never acknowledged.
This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting.
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_suspend(): the function stop the operation and acknowledge
pending interrupts (but doesn't disable it). Later in the function,
the device is moved to OHCI_SUSPEND_STATE, and the driver to
OHCI_RH_SUSPENDED. If between the moment when the interrupt is
acknowledged and the moment when the device is suspended a new
interrupt is raised, it will be never acknowledged because the
driver is now not in OHCI_RH_RUNNING state.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
This does not happen on real hardware because real hardware never send
interrupt immediately after the controller has been moved to OPERATION state.
This patch tries to delay the first SOF interrupt to let driver exits from
the critical section (which is not protected against interrupts...)
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER.
In QEMU this start the SOF timer and QEMU starts to send IRQs. As
the driver is not in OHCI_STATE_RUNNING and not protected against IRQ,
the ohci_irq() can be called and the driver never moved to
OHCI_STATE_RUNNING.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
trace_usb_mtp_inotify_event() was being called after the object was
being freed.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_mtp_inotify_cleanup uses QLIST_FOREACH to pick events
from a list and free them which is incorrect. Use QLIST_FOREACH_SAFE
instead.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that: "This bit is set by HCD to initiate a software reset of HC."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that, when entering this state, "the contents of the registers
(except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset,
which causes the Root Hub's downstream ports to be reset and possibly powered off."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction. That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.
This is CVE-2015-8558.
Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the host polls for events, we check our
events qlist and send one event at a time. Also, note
that the event packet needs to be sent in one go, so
I increased the max packet size to 64.
Tested with a linux guest.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-5-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For now, we use inotify watches to track only a small number of
events, namely, add, delete and modify. Note that for delete, the kernel
already deactivates the watch for us and we just need to
take care of modifying our internal state.
inotify is a linux only mechanism.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-4-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On a reset, call usb_mtp_object_free on all objects and their children
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support adding/removal of objects, we will need to update
the object cache hierarchy we have built internally. Convert
to using a Qlist for easier management.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1448314625-3855-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
usb->speed is the usb speed the device is actually running on in the
qemu emulation (i.e. from the guests point of view). So when plugging
usb3 devices into ehci hostadapter this is HIGH not SUPER.
To figure whenever the host talks to the device with superspeed we
have to check speedmask instead and see whenever the superspeed bit
is set there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1445603230-11840-1-git-send-email-kraxel@redhat.com
When a device is detached, clear the suspend bit (PORTSC_SUSPEND)
in the port status register.
The specs are not *that* clear what is supposed to happen in case
a suspended device is unplugged. But the enable bit (PORTSC_PED)
is cleared, and the specs mention setting suspend with enable being
unset is undefined behavior. So clearing them both looks reasonable,
and it actually fixes the reported bug.
https://bugzilla.redhat.com/show_bug.cgi?id=1268879
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1445413462-18004-1-git-send-email-kraxel@redhat.com
Only call bdrv_add_key() on the BlockDriverState if it is not NULL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including dirent.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
usbnet_receive already drops packet if rndis_state is not
RNDIS_DATA_INITIALIZED, and queues packet if in buffer is not available.
The only difference is s->dev.config but that is similar to rndis_state.
Drop usbnet_can_receive and move these checks to usbnet_receive, so that
we don't need to explicitly flush the queue when s->dev.config changes
value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1436955553-22791-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit e0cf11f31c ("timer: Use a single
definition of NSEC_PER_SEC for the whole codebase") renamed
NANOSECONDS_PER_SECOND to NSEC_PER_SEC.
On Mac OS X there is a <dispatch/time.h> system header which also
defines NSEC_PER_SEC. This causes compiler warnings.
Let's use the old name instead. It's longer but it doesn't clash.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1436364609-7929-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 4e8cfbe114.
We should not poll via timer, and with ccid being fixed
to properly notify us about pending transfers we don't have to.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Value from xfer->packet.ep is assigned to ep here, but that
stored value is not used before it is overwritten. Remove it.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
... and the status register should say so.
Fixes "usbus0: controller did not stop" error printed by freebsd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When x-root property not be configured, will cause segfault
because of null pointer accessing. Add a check for s->root
property avoid segfault.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When we find a IOC bit set on a setup trb and therefore queue an event,
that should not stop events being generated for following data trbs.
So clear the 'reported' flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes xhci generate multiple short packet events in case of
multi-trb transfers. Which is wrong. We need to fix this in a
different way.
This reverts commit aa6857891d.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The dev->config pointer isn't set until guest
system initializes usb devices (via
usb_desc_set_config). However qemu networking can
go through some motions prior to that, e.g.:
#0 is_rndis (s=0x555557261970) at hw/usb/dev-network.c:653
#1 0x000055555585f723 in usbnet_can_receive (nc=0x55555641e820) at hw/usb/dev-network.c:1315
#2 0x000055555587635e in qemu_can_send_packet (sender=0x5555572660a0) at net/net.c:470
#3 0x0000555555878e34 in net_hub_port_can_receive (nc=0x5555562d7800) at net/hub.c:101
#4 0x000055555587635e in qemu_can_send_packet (sender=0x5555562d7980) at net/net.c:470
#5 0x000055555587dbca in tap_can_send (opaque=0x5555562d7980) at net/tap.c:172
The command to reproduce most reliably was:
qemu-system-i386 -usb -device usb-net,vlan=0 -net tap,vlan=0
This wasn't strictly a problem with tap. Other
networking endpoints (vde, user) could trigger
this problem as well.
Fixes: https://bugs.launchpad.net/qemu/+bug/1050823
Cc: qemu-stable@nongnu.org
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Delete set_usb_string(), usb_ep_get_ifnum(), usb_ep_get_max_packet_size()
usb_ep_get_max_streams() and usb_ep_set_pipeline() since they are
not used anymore.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Lidonglin <lidonglin@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Ohci does't support hotplugging/hotunplugging yet, but
existing resource cleanup leak logic likes ehci/uhci.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Cc: qemu-stable <qemu-stable@nongnu.org>
Reported-by: Lidonglin <lidonglin@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Boards that do not include an USB controller should not provide
USB devices. However, when running "qemu-system-s390x -device help"
for example, there's still a usb-hub, usb-kbd, usb-mouse and
usb-tablet in the list of "supported" devices. Let's fix that
by compiling and linking the USB files only if it is really
necessary.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
usb_msd_password_cb() is only called from within an HMP command
handler. Replace by error_report_err().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the image is encrypted, QMP device_add creates the device, defers
actually attaching it to when the key becomes available, then returns
an error. This is wrong. device_add must either create the device
and succeed, or do nothing and fail.
The bug is in usb_msd_realize_storage(). It posts an error with
qerror_report_err(), and returns success. Device realization relies
on the return value, and completes. The QMP monitor, however, relies
on the posted error, and sends it in an error reply.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -usb -qmp stdio -drive if=none,id=foo,file=geheim.qcow2
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device_add", "arguments": { "driver": "usb-storage", "id": "bar", "drive": "foo" } }
{"error": {"class": "DeviceEncrypted", "desc": "'foo' (geheim.qcow2) is encrypted"}}
Even though we got an error back, the device got created just fine.
To demonstrate, let's unplug it again:
{"execute":"device_del","arguments": { "id": "bar" } }
{"timestamp": {"seconds": 1426003440, "microseconds": 237181}, "event": "DEVICE_DELETED", "data": {"path": "/machine/peripheral/bar/bar.0/legacy[0]"}}
{"timestamp": {"seconds": 1426003440, "microseconds": 238231}, "event": "DEVICE_DELETED", "data": {"device": "bar", "path": "/machine/peripheral/bar"}}
{"return": {}}
Fix by making usb_msd_realize_storage() fail properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
monitor_read_bdrv_key_start() does several things:
1. If no key is needed, call completion_cb() and succeed
2. If we're in QMP context, call qerror_report_err() and fail
3. Start reading the key in the monitor.
This is two things too many. Inline 1. and 2. into its callers
monitor_read_block_device_key() and usb_msd_realize_storage().
Since monitor_read_block_device_key() only ever runs in HMP context,
drop 2. there.
The next commit will clean up the result in usb_msd_realize_storage().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 457215ec "ohci: Use QOM realize for OHCI" converted only
"sysbus-ohci". Finish the job: convert "pci-ohci".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit broke the additional messages explaining the error
messages. Improve the error messages, so they don't need explaining
so much. Helps QMP users as well, unlike additional explanations.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This loses the messages explaining the error printed with
error_printf_unless_qmp(). The next commit will make up for the loss.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU/sUFAAoJEL/70l94x66D1JwIAJ28Lan2DQwi+xHvNxF8zW6n
v7eMc04/fepuon0TYmUZC3qbqc00sccEQZQ+yAAauT9epZ/kdSDudDOzG+3F4MuQ
/X3crXw2/jrhtWedGq49vFCONX4MKoaoudqK8kOFMe1ImQgkOYeAzOoqeFXyHsFh
jINlKTJZB6oKzrZ+SYryY14cO7pvGaIhyqaCC+6GcVihTjm9Yq13lP1lFj7LsVRV
aGfd6xH9RSV/mwzvZwD4i3cUWSUaV/wY0NDhAEzDPCUcxX0/nAj3XF1YeJUF30Qd
ETaCLo/Nxq2R6POK3c/Zm/FRLvjzZ2caD+q1LcwB/bCYdc2lJ1JDxE/hr48ANv0=
=OWXY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- scsi: improvements to error reporting and conversion to realize,
Coverity/sparse fix for iscsi driver
- RCU fallout: fix -daemonize and s390x system emulation
- KVM: kvm_stat improvements and new man page
- x86: SYSRET fix for VxWorks
# gpg: Signature made Tue Mar 10 10:18:45 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
x86: fix SS selector in SYSRET
scsi: Convert remaining PCI HBAs to realize()
scsi: Improve error reporting for invalid drive property
hw: Propagate errors through qdev_prop_set_drive()
scsi: Clean up duplicated error in legacy if=scsi code
cpus: initialize cpu->memory_dispatch
rcu: handle forks safely
qemu-thread: do not use PTHREAD_MUTEX_ERRORCHECK
kvm_stat: add kvm_stat.1 man page
kvm_stat: add column headers to text UI
iscsi: Fix check for username
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hlbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3
# gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (73 commits)
MAINTAINERS: Add jcody as blockjobs, block devices maintainer
iotests: add O_DIRECT alignment probing test
block/raw-posix: fix launching with failed disks
MAINTAINERS: Add jsnow as IDE maintainer
sheepdog: Fix misleading error messages in sd_snapshot_create()
Add testcase for scsi-hd devices without drive property
scsi-hd: fix property unset case
block/vdi: Add locking for parallel requests
iotests: Drop vpc from 004's and 104's format list
iotests: Remove 006
iotests: Fix 051's reference output
virtio-blk: Remove the stale FIXME comment
tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test
libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c
sheepdog: fix confused return values
qtest/ahci: add fragmented dma test
qtest/ahci: Add PIO and LBA48 tests
qtest/ahci: Add DMA test variants
libqos/ahci: add ahci command helpers
qtest/ahci: Add a macro bootup routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
geometry: hd_geometry_guess function autodetects the drive geometry.
This patch adds a block backend call, that probes the backing device
geometry. If the inner driver method is implemented and succeeds
(currently only for DASDs), the blkconf_geometry will pass-through
the backing device geometry. Otherwise will fallback to old logic.
blocksize: This patch initializes blocksize properties to 0.
In order to set the property a blkconf_blocksizes was introduced.
If user didn't set physical or logical blocksize, it will
retrieve its value from a driver (only succeeds for DASD), otherwise
it will set default 512 value.
The blkconf_blocksizes call was added to all users of BlkConf.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Three kinds of callers:
1. On failure, report the error and abort
Passing &error_abort does the job. No functional change.
2. On failure, report the error and exit()
This is qdev_prop_set_drive_nofail(). Error reporting moves from
qdev_prop_set_drive() to its caller. Because hiding away the error
in the monitor right before exit() isn't helpful, replace
qerror_report_err() by error_report_err(). Shouldn't make a
difference, because qdev_prop_set_drive_nofail() should never be
used in QMP context.
3. On failure, report the error and recover
This is usb_msd_init() and scsi_bus_legacy_add_drive(). Error
reporting and freeing the error object moves from
qdev_prop_set_drive() to its callers.
Because usb_msd_init() can't run in QMP context, replace
qerror_report_err() by error_report_err() there.
No functional change.
scsi_bus_legacy_add_drive() calling qerror_report_err() is of
course inappropriate, but this commit merely makes it more obvious.
The next one will clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=+CKl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150303-1' into staging
xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
# gpg: Signature made Tue Mar 3 07:38:43 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20150303-1:
xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment, when the XHCI driver in edk2
(MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf) runs on QEMU, with the options
-device nec-usb-xhci -device usb-kbd
it crashes with:
ASSERT MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c(1759):
TrsRing != ((void*) 0)
The crash hits in the following edk2 call sequence (all files under
MdeModulePkg/Bus/):
UsbEnumerateNewDev() [Usb/UsbBusDxe/UsbEnumer.c]
UsbBuildDescTable() [Usb/UsbBusDxe/UsbDesc.c]
UsbGetDevDesc() [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlGetDesc(USB_REQ_GET_DESCRIPTOR) [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlRequest() [Usb/UsbBusDxe/UsbDesc.c]
UsbHcControlTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcControlTransfer() [Pci/XhciDxe/Xhci.c]
XhcCreateUrb() [Pci/XhciDxe/XhciSched.c]
XhcCreateTransferTrb() [Pci/XhciDxe/XhciSched.c]
XhcExecTransfer() [Pci/XhciDxe/XhciSched.c]
XhcCheckUrbResult() [Pci/XhciDxe/XhciSched.c]
//
// look for TRB_TYPE_DATA_STAGE event [1]
//
//
// Store a copy of the device descriptor, as the hub device
// needs this info to configure endpoint. [2]
//
UsbSetConfig() [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlRequest(USB_REQ_SET_CONFIG) [Usb/UsbBusDxe/UsbDesc.c]
UsbHcControlTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcControlTransfer() [Pci/XhciDxe/Xhci.c]
XhcSetConfigCmd() [Pci/XhciDxe/XhciSched.c]
XhcInitializeEndpointContext() [Pci/XhciDxe/XhciSched.c]
//
// allocate transfer ring for the endpoint [3]
//
USBKeyboardDriverBindingStart() [Usb/UsbKbDxe/EfiKey.c]
UsbIoAsyncInterruptTransfer() [Usb/UsbBusDxe/UsbBus.c]
UsbHcAsyncInterruptTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcAsyncInterruptTransfer() [Pci/XhciDxe/Xhci.c]
XhcCreateUrb() [Pci/XhciDxe/Xhci.c]
XhcCreateTransferTrb() [Pci/XhciDxe/XhciSched.c]
XhcSyncTrsRing() [Pci/XhciDxe/XhciSched.c]
ASSERT (TrsRing != NULL) [4]
UsbEnumerateNewDev() in the USB bus driver issues a GET_DESCRIPTOR
request, in order to determine the number of configurations that the
endpoint supports. The requests consists of three stages (three TRBs),
setup, data, and status. The length of the response is determined in [1],
namely from the transfer event that the host controller generates in
response to the request's middle stage (ie. the data stage).
If the length of the answer is correct (a full GET_DESCRIPTOR request
takes 18 bytes), then the XHCI driver that underlies the USB bus driver
"snoops" (caches) the descriptor data for later [2].
Later, the USB bus driver sends a SET_CONFIG request. The underlying XHCI
driver allocates a transfer ring for the endpoint, relying on the data
snooped and cached in step [2].
Finally, the USB keyboard driver submits an asynchronous interrupt
transfer to manage the keyboard. As part of this it asserts [4] that the
ring has been allocated in step [3].
And this ASSERT() fires. The root cause can be found in the way QEMU
handles the initial GET_DESCRIPTOR request.
Again, that request consists of three stages (TRBs, Transfer Request
Blocks), "setup", "data", and "status". The XhcCreateTransferTrb()
function sets the IOC ("Interrupt on Completion") flag in each of these
TRBs.
According to the XHCI specification, the host controller shall generate a
Transfer Event in response to *each* individual TRB of the request that
had the IOC flag set. This means that QEMU should queue three events:
setup, data, and status, for edk2's XHCI driver.
However, QEMU only generates two events:
- one for the setup (ie. 1st) stage,
- another for the status (ie. 3rd) stage.
No event is generated for the middle (ie. data) stage. The loop in QEMU's
xhci_xfer_report() function runs three times, but due to the "reported"
variable, only the first and the last TRBs elicit events, the middle (data
stage) results in no event queued.
As a consequence:
- When handling the GET_DESCRIPTOR request, XhcCheckUrbResult() in [1]
does not update the response length from zero.
- XhcControlTransfer() thinks that the response is invalid (it has zero
length payload instead of 18 bytes), hence [2] is not reached; the
device descriptor is not stashed for later, and the number of possible
configurations is left at zero.
- When handling the SET_CONFIG request, (NumConfigurations == 0) from
above prevents the allocation of the endpoint's transfer ring.
- When the keyboard driver tries to use the endpoint, the ASSERT() blows
up.
The solution is to correct the emulation in QEMU, and to generate a
transfer event whenever IOC is set in a TRB.
The patch replaces
!reported && (IOC || foo) == !reported && IOC ||
!reported && foo
with
IOC || (!reported && foo) == IOC ||
!reported && foo
which only changes how
reported && IOC
is handled. (Namely, it now generates an event.)
Tested with edk2 built for "qemu-system-aarch64 -M virt" (ie.
"ArmVirtualizationQemu.dsc", aka "AAVMF"), and guest Linux.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
