Commit Graph

52789 Commits

Author SHA1 Message Date
Suraj Jitindar Singh
b4db54132f target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL
The H_REGISTER_PROCESS_TABLE H_CALL is used by a guest to indicate to the
hypervisor where in memory its process table is and how translation should
be performed using this process table.

Provide the implementation of this H_CALL for a guest.

We first check for invalid flags, then parse the flags to determine the
operation, and then check the other parameters for valid values based on
the operation (register new table/deregister table/maintain registration).
The process table is then stored in the appropriate location and registered
with the hypervisor (if running under KVM), and the LPCR_[UPRT/GTSE] bits
are updated as required.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Correct missing prototype and uninitialized variable]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Suraj Jitindar Singh
d77a98b015 target/ppc: Add new H-CALL shells for in memory table translation
The use of the new in memory tables introduced in ISAv3.00 for translation,
also referred to as process tables, requires the introduction of 3 new
H-CALLs; H_REGISTER_PROCESS_TABLE, H_CLEAN_SLB, and H_INVALIDATE_PID.

Add shells for each of these and register them as the hypercall handlers.
Currently they all log an unimplemented hypercall and return H_FUNCTION.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Sam Bobroff
cf1c4cce7c target-ppc: support KVM_CAP_PPC_MMU_RADIX, KVM_CAP_PPC_MMU_HASH_V3
Query and cache the value of two new KVM capabilities that indicate
KVM's support for new radix and hash modes of the MMU.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Sam Bobroff
c64abd1f9c spapr: Add ibm,processor-radix-AP-encodings to the device tree
Use the new ioctl, KVM_PPC_GET_RMMU_INFO, to fetch radix MMU
information from KVM and present the page encodings in the device tree
under ibm,processor-radix-AP-encodings. This provides page size
information to the guest which is necessary for it to use radix mode.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Compile fix for 32-bit targets, style nit fix]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Alexey Kardashevskiy
d6ee2a7c85 target-ppc: kvm: make use of KVM_CREATE_SPAPR_TCE_64
KVM_CAP_SPAPR_TCE capability allows creating TCE tables in KVM which
allows having in-kernel acceleration for H_PUT_TCE_xxx hypercalls.
However it only supports 32bit DMA windows at zero bus offset.

There is a new KVM_CAP_SPAPR_TCE_64 capability which supports 64bit
window size, variable page size and bus offset.

This makes use of the new capability. The kernel headers are already
updated as the kernel support went in to v4.6.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Thomas Huth
9d169fb3c8 hw/ppc/pnv: Classify the "PowerNV Chip" devices as CPU devices
The devices that are derived from TYPE_PNV_CHIP currently show up
as "uncategorized" devices in the help text of "-device ?". Since
they obviously are related to the CPU, let's put them into the
CPU category instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Cédric Le Goater
147ff8079e ppc/spapr: QOM'ify sPAPRRTCState
Also use an 'sPAPRRTCState' attribute under the sPAPR machine to hold
the RTC object. Overall, these changes remove an unnecessary and
implicit dependency on SysBus.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
David Gibson
3fa14fbe13 pseries: Add pseries-2.10 machine type
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Sam Bobroff
f3d9f303ac target/ppc: Improve accuracy of guest HTM availability on P8s
On Power8 hosts it is currently theoretically possible for QEMU/KVM-HV guests
to receive a ibm,pa-features property indicating that HTM support is available
when it is not.  The situation would occur if the platform firmware of
a Power8 host cleared the HTM bit of the ibm,pa-features property.
QEMU would query KVM for the availability of HTM, which will return no
support, but workaround code in kvm_arch_init_vcpu() would then
re-enable it because KVM_HV is in use and the processor is P8.

This patch adjusts the workaround in kvm_arch_init_vcpu() so that it does not
enable HTM (in the above case) unless the host kernel indicates to the QEMU
process, via the auxiliary vector, that userspace can use HTM (via the HWCAP2
bit KVM_FEATURE2_HTM).

The reason to use the value from the auxiliary vector is that it is
set based only on what the host kernel found in the ibm,pa-features
HTM bit at boot time.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Peter Maydell
fe491fa85c Patch queue for s390 - 2017-04-25
Two simple fixes this time around:
 
   - fix BQL for s390 virtio target
   - Fix SIGP emulation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJY/zW2AAoJECszeR4D/txgnsUP/AjchRi1iPFmiIJpEZxo6L4e
 RZfylCvHWwqplmu2BgTurA+X+qEiHSu6awRubFXCAU4pyBpXt2ejoJEzkTKI1MK/
 HYsxeCz8+uasdjjP0XS8K3KQaEdIH5VXxnYzDHHL40AtxGYdFEy7PyHi47abZYBG
 9I0O4G3E9KRmZD2mVdlomsRv70WCI4/z3xBsoGQH8GOcxuySwvPlvzIevSeI1HzT
 SPdkz0eU9vZSfVhKy7YU4Kj6w3EPVmeXPCEGbEhOy0pzJYPgG9ST//WyOegjMr6Y
 UYsvhKiG90WebiXgxN2WaiBMReEpBI2/fUsFlLskpX/LulhJDEmMIOYb9sD5in7I
 q6fU/KItU00zwwBXz/8ID8MlZQb1xmSuy327+LwYOX2AjN+4G/CNx4iQEjLLNF+p
 ecLeq7tKycs7yNK5LlE8XfBZnDTCniuQCFbq/d+wT6slCPopmm96Omt++8iY/vyk
 3mFEhEat/0Tm3oPrkbh2IlcYCyvfZWy963pQ/DnsSfVcjl88GQyzQGFuCVN8HZIo
 8icmqPid2jyhMZtdjPtDHhpAuhWwo1o+vzR0bZxwjDj4/UJ00/dBHSUmu2gFIUUb
 0/xQacvY63qb+FuQynw2eTFfxZoOPAmOIb/HAY+N/GreQNXIkbtrjVM7IQmfaB5b
 aZPwxmqZ7cwU8YTfH25O
 =Jzre
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/agraf/tags/signed-s390-for-upstream' into staging

Patch queue for s390 - 2017-04-25

Two simple fixes this time around:

  - fix BQL for s390 virtio target
  - Fix SIGP emulation

# gpg: Signature made Tue 25 Apr 2017 12:40:38 BST
# gpg:                using RSA key 0x2B33791E03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"
# Primary key fingerprint: 7F2A 4C87 F94C 5EFE DBC3  75DC 1631 30DA 5B24 530A
#      Subkey fingerprint: 54D3 364F A6C3 60FF AF81  EB53 2B33 791E 03FE DC60

* remotes/agraf/tags/signed-s390-for-upstream:
  s390x/misc_helper.c: wrap s390_virtio_hypercall in BQL
  target-s390x: Mask the SIGP order_code to 8bit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25 14:48:55 +01:00
Peter Maydell
b8c7193fe9 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJY/zFbAAoJEO8Ells5jWIR7LgH/A6lWkODVSKihnibRH82J9oe
 rTsDdLgAGAMAur++tmNorPadZyMe/2+Cu0VsiIv591ldILruN6+jJydBzFtWFYE5
 JQKa2VSTDu6bHPhr/UpRnWLhGzaJogklJR6YLkonDJznb1UnnTwEZ8c8+XD4gWLo
 byo/dYF1yMnpVxSak/FkmCmwxc2K7s7P+r4FWO2CgAgY28F+/qERWJMbl1iUevQP
 E1PC/XXEvhMdxi+6oYmWACdbW9/KwC5KKVELsQWYU1DcpQ7rWXCtA/mtKxvX+ePw
 7CUK9ldeFXHE8uWVDnh3cWUL65Q8OtZarjMbrnN7xzcQDhMysStvVNS4QckN6/I=
 =PEvc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  COLO-compare: Optimize tcp compare trace event
  COLO-compare: Optimize tcp compare for option field
  slirp: add a fake NC-SI backend
  aspeed: add a FTGMAC100 nic
  net/ftgmac100: add a 'aspeed' property
  net: add FTGMAC100 support
  hw/net: add MII definitions
  colo-compare: Fix old packet check bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25 14:14:17 +01:00
Aurelien Jarno
2cf9953bee s390x/misc_helper.c: wrap s390_virtio_hypercall in BQL
s390_virtio_hypercall can trigger IO events and interrupts, most notably
when using virtio-ccw devices.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 278f5e98c6 ("s390x/misc_helper.c: wrap IO instructions in BQL")
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-04-25 13:39:43 +02:00
Philipp Kern
601b9a9008 target-s390x: Mask the SIGP order_code to 8bit.
According to "CPU Signaling and Response", "Signal-Processor Orders",
the order field is bit position 56-63. Without this, the Linux
guest kernel is sometimes unable to stop emulation and enters
an infinite loop of "XXX unknown sigp: 0xffffffff00000005".

Signed-off-by: Philipp Kern <phil@philkern.de>
Reviewed-by: Thomas Huth <thuth@tuxfamily.org>
[agraf: add comment according to email]
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-04-25 13:39:43 +02:00
Brendan Shanks
4ba967ad74 ui/cocoa.m: Fix macOS 10.12 deprecation warnings
macOS 10.12 deprecated/replaced many AppKit constants to make naming
more consistent. Use the new constants, and #define them to the
old constants when compiling against a pre-10.12 SDK.

Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20170425062952.99149-1-brendan@bslabs.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25 12:33:51 +01:00
Zhang Chen
0fc8aec7de COLO-compare: Optimize tcp compare trace event
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Zhang Chen
184d4d4203 COLO-compare: Optimize tcp compare for option field
In this patch we support packet that have tcp options field.
Add tcp options field check, If the packet have options
field we just skip it and compare tcp payload,
Avoid unnecessary checkpoint, optimize performance.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Cédric Le Goater
47bb83cad4 slirp: add a fake NC-SI backend
NC-SI (Network Controller Sideband Interface) enables a BMC to manage
a set of NICs on a system. This model takes the simplest approach and
reverses the NC-SI packets to pretend a NIC is present and exercise
the Linux driver.

The NCSI header file <ncsi-pkt.h> comes from mainline Linux and was
untabified.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Cédric Le Goater
ea337c6549 aspeed: add a FTGMAC100 nic
There is a second NIC but we do not use it for the moment. We use the
'aspeed' property to tune the definition of the end of ring buffer bit
for the Aspeed SoCs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Cédric Le Goater
1335fe3eb2 net/ftgmac100: add a 'aspeed' property
The Aspeed SoCs have a different definition of the end of the ring
buffer bit. Add a property to specify which set of bits should be used
by the NIC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Krzysztof Kozlowski
d77b71c2a4 hw/arm/exynos: Add generic SDHCI devices
Exynos4210 has four SD/MMC controllers supporting:
 - SD Standard Host Specification Version 2.0,
 - MMC Specification Version 4.3,
 - SDIO Card Specification Version 2.0,
 - DMA and ADMA.

Add emulation of SDHCI devices which allows accessing storage through SD
cards. Differences from real hardware:
 - Devices are shipped with eMMC memory, not SD card.
 - The Exynos4210 SDHCI has few more registers, e.g. for
   controlling the clocks, additional status (0x80, 0x84, 0x8c). These
   are not implemented.

Testing on smdkc210 machine with "-drive file=FILE,if=sd,bus=0,index=2".

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170422190709.8676-1-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25 11:17:49 +01:00
Peter Maydell
f4b5b021c8 -----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJY/k9tAAoJEL2+eyfA3jBXmS4P/jwl1Z9lyFJeNNyTR/pgLqnQ
 /izpS7OBhjzpXuft99dQT8XcX1q4D0Ok0Hf0cs6EffiYa1Ob925wiKi7l+Om1F/c
 23aqvaLFsOAxg7DV4kZ+PN1vClfZ/8qlF5hy/CzjmORCGJZXcr29h8JnhTJctrz9
 I7KEzxL+aBZHi2QrMpWFIoQgOopLbhnanvxR/SmreQvVV6/AtIBI7qIoR/1HedQu
 5EPKSaB81bK2tb+EfRJa9EDGGgufZqEssN0S30DlmYk+M4L5uDNihVD/MfLAGDgB
 Kz42EWNuaZj5oBHtDrpcrcEv3/bl8GCGjRJNPnyrwEEYp4/ZLxgzgoRMZNMlC2c0
 J+KqY0q+3L8XZMIWb2A8rzAheuzc9CA0b1D+mZ50y0j45wFDmCSSw+LKX907isro
 ZP6I2MoSufH22AbihGxKPpZXATYcIZKNnCBaZWpDFcvTu7x/5LveogpqXnqFc6Z5
 +eyNYJCQoepTNucuD3+9Blqosz4hEj7qZFvHWGxpDxIsjBTe6SgZTXsNR48osWlb
 xvd6hTzycYnvO5R96/e/nudJ5WQjhX3VedkkWG5VAYShCl0WeRNf/JawVYTspgtq
 P2Pbq6iBcnDfXd8Xrng69fd3OMGnKKgaEVFrk+NkhU2ZvqcUqP3OCReL62UZDpB5
 F83rHk4WbC8B9eqC+afO
 =CVO6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging

# gpg: Signature made Mon 24 Apr 2017 20:18:05 BST
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  qemu-iotests: _cleanup_qemu must be called on exit
  block/rbd: Add support for reopen()
  block/rbd - update variable names to more apt names
  block: use bdrv_can_set_read_only() during reopen
  block: introduce bdrv_can_set_read_only()
  block: code movement
  block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only
  block: do not set BDS read_only if copy_on_read enabled
  block: add bdrv_set_read_only() helper function
  qemu-iotests: exclude vxhs from image creation via protocol
  block/vxhs.c: Add qemu-iotests for new block device type "vxhs"
  block/vxhs.c: Add support for a new block device type called "vxhs"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25 09:21:54 +01:00
Jeff Cody
ecfa185400 qemu-iotests: _cleanup_qemu must be called on exit
For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.

If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).

This updates those tests that did not have a cleanup in qemu-iotests.

(I swapped spaces for tabs in test 102 as well)

Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
56e7cf8df0 block/rbd: Add support for reopen()
This adds support for reopen in rbd, for changing between r/w and r/o.

Note, that this is only a flag change, but we will block a change from
r/o to r/w if we are using an RBD internal snapshot.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
80b61a27c6 block/rbd - update variable names to more apt names
Update 'clientname' to be 'user', which tracks better with both
the QAPI and rados variable naming.

Update 'name' to be 'image_name', as it indicates the rbd image.
Naming it 'image' would have been ideal, but we are using that for
the rados_image_t value returned by rbd_open().

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
3d8ce171cb block: use bdrv_can_set_read_only() during reopen
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 00aed7ffdd7be4b9ed9ce1007d50028a72b34ebe.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
45803a0396 block: introduce bdrv_can_set_read_only()
Introduce check function for setting read_only flags.  Will return < 0 on
error, with appropriate Error value set.  Does not alter any flags.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
93ed524e3d block: code movement
Move bdrv_is_read_only() up with its friends.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 73b2399459760c32506f9407efb9dddb3a2789de.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
d6fcdf06d9 block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only
The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of
the BDS 'read_only' state, but there are a few places where it
is ignored.  In the bdrv_set_read_only() helper, make sure to
honor the flag.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
e2b8247a32 block: do not set BDS read_only if copy_on_read enabled
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function.  This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().

This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.

This patch also changes the behavior of vvfat.  Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.

For instance, this -drive parameter would result in a writable image:

"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"

This is not correct.  Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
fe5241bfe3 block: add bdrv_set_read_only() helper function
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
2017-04-24 15:09:33 -04:00
Jeff Cody
a98f49f46a qemu-iotests: exclude vxhs from image creation via protocol
The protocol VXHS does not support image creation.  Some tests expect
to be able to create images through the protocol.  Exclude VXHS from
these tests.

Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-04-24 15:09:33 -04:00
Ashish Mittal
ae0c0a3dec block/vxhs.c: Add qemu-iotests for new block device type "vxhs"
These changes use a vxhs test server that is a part of the following
repository:
https://github.com/VeritasHyperScale/libqnio.git

Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-3-git-send-email-Ashish.Mittal@veritas.com
2017-04-24 15:09:33 -04:00
Ashish Mittal
da92c3ff60 block/vxhs.c: Add support for a new block device type called "vxhs"
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git

Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'

Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0

Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'

[Jeff: Modified trace-events with the correct string formatting]

Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
2017-04-24 15:08:42 -04:00
Peter Maydell
eab1e53cac fix display update races, part one.
add xres + yres properties to qxl and virtio.
 misc fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJY/ew5AAoJEEy22O7T6HE4sXIP/2UxIRxgqIG/Gj+WWp4hHI7L
 9IharsFTO2OvZmwko+FdX8EKTJrDUNkCclei8FpYXmL3xnSALwYSokEjJV5wJ9r3
 Owf+ymWgwLfr6k/pnHb4F6iBQk82m052ZXJB4nsAJV1RbCA2cEnyuF7IVA/uPZf7
 HCjkXwJcg53XyVy7OzDilgZkNxFeioc4I32pjTBtWKmqsFqZqsLMJMZ5pD3ubpRz
 7wfwBFvH910TjB7YVPfZN0l8b2X6dUiK1b+pQCqvogoDLhItxG6aN3J3sjDbOoSP
 6Bwm815oPWziVWXHvPEoMhdorGhkoGpJXBdkSTeiW/CCdl6zF1EUJZc6yDWh+2SS
 ZKjV/aY0qPOxNMlaN4gf2scKVbn8nrsB/NnH53uczAUaelfn1v8S0aRr01i0z43v
 TWu87OszG14cQNssVjI8v80G+29Dr2bw0tFN2JAjVB7ZrNWCOkOgelxFEOBPK4EU
 eBeH1fUN0/QrTvRi2JS9b4GOW94LyY20AQPvQo7aqV9PVY+5qbiVi6BSavwdhjbR
 IAh8A60xIOTm3gyM2riKi5/0YBpyUFB6dnTVn5fLwipD9pjpdT/jQyn4Kl7ZSq7T
 q8gDJ99A/zKfte0y/JyL+iJ0JPNhzQwviTpemupDa9hbrHEkpIy7LKE74JXVicEO
 zBzIa3b+I9iogSLf3V5v
 =1F5z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170424-1' into staging

fix display update races, part one.
add xres + yres properties to qxl and virtio.
misc fixes and cleanups.

# gpg: Signature made Mon 24 Apr 2017 13:14:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vga-20170424-1:
  virtio-gpu: add xres and yres properties
  qxl: add xres and yres properties
  vmsvga: fix vmsvga_update_display
  g364fb: make display updates thread safe
  exynos: make display updates thread safe
  framebuffer: make display updates thread safe
  vga: make display updates thread safe.
  vga: add vga_scanline_invalidated helper
  memory: add support getting and using a dirty bitmap copy.
  bitmap: add bitmap_copy_and_clear_atomic
  virtio-gpu: replace PIXMAN_* by PIXMAN_BE_*
  console: add same displaychangelistener registration pre-condition
  console: add same surface replace pre-condition

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 15:37:30 +01:00
Peter Maydell
4c55b1d0ba Error reporting patches for 2017-04-24
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJY/aZSAAoJEDhwtADrkYZTPS4P/1VcTOmdzD5WnPDmAPDBi7L6
 HLy1AYjFknYhE4LH3bmYHwIw32C9fIsMcXELBcYwTJAqXSyh1i27aMweq4BwBn9u
 eURVldSVny7u1lyLVGwjRfxnT6073QdOnjMIxMBHkZitmD9Oov883s+yJOdoLa83
 /E1lXqTgsltUXOOdD3yj9LhYoU4wLz0G07xUOB2zvk1f9UJYQWWWg9XP3158IFfI
 ikJSBDI5T6gD0tucJbhzpTzkuoIoZggMCtF9gpHbmTuL/ukkunRYiPTbhA+ZNpI+
 HWyh33U5v+GYAGh4ZcQmonQUztk0u6y5eisgTslCaRlfhHLEXgPmKGCFKjbhhtIz
 XyhLykoR94yvfp0k4xAU5VXsogJajg84qibyIMfPeyL2cFbIbjgruPWVoclefzEL
 ekZPzXxcZKH0rcfTnSbgqVnnNNuk7Nj5AYvfqKLEBFcP3I5d/D+3KZOj1a7iZxKq
 hyPQ8fFtIytBs8UsAW7qOKD56PJnfCQ0Lo3vhPo4Jx9/lGdtHsCvj8QQAHo9J+Jc
 3L/qZtddhEqZdowCF8/c9KtkqByPkq8BywJEc/4vUMl17SpjvFpkbzACaw+i8sY2
 pQAQnnA+xeAeEbXZ/6QltrF089nSSlQaj666gUXrLOK82blksdBV3+tmXi9fKLKu
 OplAMTSiBycheUNGGtGd
 =ItSk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-04-24' into staging

Error reporting patches for 2017-04-24

# gpg: Signature made Mon 24 Apr 2017 08:16:34 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2017-04-24:
  error: Apply error_propagate_null.cocci again
  qga: Make errp the last parameter of qga_vss_fsfreeze
  migration: Make errp the last parameter of local functions
  scsi: Make errp the last parameter of virtio_scsi_common_realize
  fdc: Make errp the last parameter of fdctrl_connect_drives
  nfs: Make errp the last parameter of nfs_client_open
  block: Make errp the last parameter of commit_active_start
  mirror: Make errp the last parameter of mirror_start_job
  crypto: Make errp the last parameter of functions
  block: Make errp the last parameter of bdrv_img_create
  socket: Make errp the last parameter of vsock_connect_saddr
  socket: Make errp the last parameter of unix_connect_saddr
  socket: Make errp the last parameter of inet_connect_saddr
  socket: Make errp the last parameter of socket_connect
  util/error: Fix leak in error_vprepend()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 14:49:48 +01:00
BALATON Zoltan
9eb2575e6c ppc: Add SM501 device in ppc softmmu targets default configs
This is not used by default on any emulated machine yet but it is
still useful to have it compiled so it can be added from the command
line for clients that can use it (e.g. MorphOS has no driver for any
other emulated video cards but can output via SM501)

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: bf305f36dcde152668cf12438ef983cd09ed2d3f.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
2edd6e4ac5 sm501: Add vmstate descriptor
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 86803c6f40cd678b61b3b1a1429683f60f0aa89a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
b612a49db2 sm501: Add some more missing registers
This is to allow clients to initialise these without failing as long
as no 2D engine function is called that would use the written value.
Saved values are not used yet (may get used when more of 2D engine is
added sometimes) and clients normally only write to most of these
registers, nothing is known to ever read them but they are documented
as read/write so also implement read for these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
1ae5e6eb42 sm501: Add support for panel layer
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 2029a276362c0c3a14c78acb56baa9466848dd51.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
01d2d584c9 sm501: Misc clean ups
- Rename a variable
- Move variable declarations out of loop to the beginning in draw_hwc_line

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 187c9e4e09d9bc2967b2454b36bb088ceef0b8bc.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
6a2a5aae02 sm501: Fix hardware cursor
Rework HWC handling to simplify it and fix cursor not updating on
screen as needed. Previously cursor was not updated because checking
for changes in a line overrode the update flag set for the cursor but
fixing this is not enough because the cursor should also be updated if
its shape or location changes. Introduce hwc_invalidate() function to
handle that similar to other display controller models.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
afef2e1d53 sm501: Fix device endianness
We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.

Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
efae27848d sm501: Add emulation of chip connected via PCI
Only the display controller part is created automatically on PCI

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
c795fa8447 sm501: Get rid of base address in draw_hwc_line
Do not use the base address to access data in local memory. This is in
preparation to allow chip connected via PCI where base address depends
on where the BAR is mapped so it will be unknown.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
ca8a110470 sm501: QOMify
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
70e46ca887 sm501: Add missing arbitration control register
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: d1eaf3b19c40aeb32a343a211f2b56664a67f948.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
e2ee84760e sm501: Use defined constants instead of literal values where available
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 31205c2df623e7b133ef942ff4f5e95fff800a14.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
BALATON Zoltan
64f1603b07 sm501: Fixed code style and a few typos in comments
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 36288b703e7d56822c818567193ff28cdc47377e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 12:32:12 +01:00
Peter Maydell
d526e5d874 Update OpenBIOS images
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJY+vnRAAoJEFvCxW+uDzIfN+UIALS0W/eGr3xlFovFrQAcSO6X
 YV9RCGMJ+p4g4yOocMBnQEjZsrzvG1d+YROYj2wP3Rzkgm/64lLXLuvwGncgAdba
 PG8g9VGTBwY9olhNze2TXy9MX9eVdrLWnez22pRnNUnhTx7oMmqit3/BuBVqkwKT
 mhU1WEbiQXdCoVaiSZ3YtzD//H+XQfN0gf1ytYP+gg3eBpGqLS7LlVNp5L8bj6i/
 9UW5+Z/lYaM/QglsupFAbg6AxSttDzGjJ9OKsP38OOI0qeqN+ypFz0Dm75nrGqsC
 GbmtffbuwsjE8EUT1CjmRqsiAWdqy318qj1pr6arGWXgL3PVyvgYYJ9AE6epROI=
 =AZsB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging

Update OpenBIOS images

# gpg: Signature made Sat 22 Apr 2017 07:36:01 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to 04898e8 built from submodule.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 11:32:02 +01:00
Peter Maydell
cd1ea50895 qemu-sparc update
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJY+ljvAAoJEFvCxW+uDzIfkDUH/09ijD3I+JxuwolZ8oY09Nhx
 ixnvIqylAMYr7BfRa7BxyaV+4lLIL5Irt/A9zND/7bYMdmW1QDLCCE3Qre8V8Q3z
 eu3XLfeYYigSYyPWrxJ4wVchxZO/V2CEd2oh0pgHGrI4ZZ27nAN8xsM3JkxtHDHm
 aDHCTZ6zU2NC2YC6NyD9+DB9PvuxQPlzTSdzNjSZQ9YN0fMJuV6z1Oez+gibM+rV
 l+pG/kN5g+QboLHyJbXdiSSW40N5PyiSD7hYO9RWEKmlbktfVKkR3h+M0B1eJmyc
 gtl6bgQrBO0zP4cWOR/SBZj8223vkzHll342VSYw2R1eLdkJCuNvl6jXssKwVPY=
 =hwYF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging

qemu-sparc update

# gpg: Signature made Fri 21 Apr 2017 20:09:35 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed:
  tcx: switch to load_image_mr() and remove prom_addr hack
  tcx: use tcx_set_dirty() for accelerated ops
  tcx: remove primitives for non-32-bit surfaces
  tcx: remove TARGET_PAGE_SIZE from tcx24_update_display()
  tcx: remove TARGET_PAGE_SIZE from tcx_update_display()
  tcx: remove page24 and cpage from tcx24_update_display()
  tcx: alter tcx24_reset_dirty() to accept address and length parameters
  tcx: alter tcx24_check_dirty() to accept address and length parameters
  tcx: ensure tcx_set_dirty() also invalidates the 24-bit plane and cplane
  tcx: alter tcx_set_dirty() to accept address and length parameters
  cg3: switch to load_image_mr() and remove prom-addr hack
  cg3: fix up size parameter for memory_region_get_dirty()
  cg3: remove TARGET_PAGE_SIZE rounding on dirty page detection

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24 09:43:03 +01:00