The last remaining bit for MVC is handling destructive overlaps in a
fault-safe way.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As we are moving between address spaces, we can use access_memmove()
without checking for destructive overlaps (especially of real storage
locations):
"Each storage operand is processed left to right. The
storage-operand-consistency rules are the same as
for MOVE (MVC), except that when the operands
overlap in real storage, the use of the common real-
storage locations is not necessarily recognized."
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memmove() variants by access_memmove() variants, that
first try to probe access to all affected pages (maximum is two pages).
Introduce access_get_byte()/access_set_byte(). We might be able to speed
up memmove in special cases even further (do single-byte access, use
memmove() for remaining bytes in page), however, we'll skip that for now.
In MVCOS, simply always call access_memmove_as() and drop the TODO
about LAP. LAP is already handled in the MMU.
Get rid of adj_len_to_page(), which is now unused.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memset() by access_memset(), that first tries to probe
access to all affected pages (maximum is two). We'll use the same
mechanism for other types of accesses soon.
Only in very rare cases (especially TLB_NOTDIRTY), we'll have to
fallback to ld/st helpers. Try to speed up that case as suggested by
Richard.
We'll rework most involved handlers soon to do all accesses via new
fault-safe helpers, especially MVC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Although we basically ignore the index all the time for CONFIG_USER_ONLY,
let's simply skip all the checks and always return MMU_USER_IDX in
cpu_mmu_index() and get_mem_index().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
24 and 31-bit address space handling is wrong when it comes to storing
back the addresses to the register.
While at it, read gprs 0 implicitly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Bit position 32-55 of general register 0 must be zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
... and don't perform any move in case the length is zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Triggered by a review comment from Richard, also MVCOS has a 32-bit
length in 24/31-bit addressing mode. Add a new helper.
Rename wrap_length() to wrap_length31().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's stay within single pages.
... and indicate cc=3 in case there is work remaining. Keep unicode
padding simple.
While reworking, properly wrap the addresses.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to mask of any unused bits. While at it, document what exactly is
missing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Perform the checks documented in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use the new helper, that also detects destructive overlaps when
wrapping.
We'll make the remaining code (e.g., fast_memmove()) aware of wrapping
later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's increment the length once.
While at it, cleanup the comment. The memset() example is given as a
programming note in the PoP, so drop the description.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Process max 4k bytes at a time, writing back registers between the
accesses. The instruction is interruptible.
"For operands longer than 2K bytes, access exceptions are not
recognized for locations more than 2K bytes beyond the current location
being processed."
Note that on z/Architecture, 2k vs. 4k access cannot get differentiated as
long as pages are not crossed. This seems to be a leftover from ESA/390.
Simply stay within single pages.
MVCL handling is quite different than MVCLE/MVCLU handling, so split up
the handlers.
Defer interrupt handling, as that will require more thought, add a TODO
for that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We'll have to zero-out unused bit positions, so make sure to write the
addresses back.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to zero out unused bits in 24 and 31-bit addressing mode.
Provide a new helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We use the marker "-1" for "no exception". s390_cpu_do_interrupt() might
get confused by that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CXf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-09-19
# gpg: Signature made Thu 19 Sep 2019 17:24:04 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
BootLinuxSshTest: Only run the tests when explicitly requested
tests/acceptance: Specify arch for QueryCPUModelExpansion
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 27a296fce9 we switched the qemu-ga manpage over to
being built from Sphinx. The makefile rules for this were correct
for an out-of-tree build, but break for in-tree builds if Sphinx is
present and we're trying to build the documentation.
Specifically, because Sphinx refuses to build output files into
the same directory as its sources, for an in-tree build we tell
it to build into a subdirectory docs/built, and set up a makefile
variable MANUAL_BUILDDIR indicating where the docs are going.
The makefile rule telling Make how to build qemu-ga.8 correctly
used this variable, but the lines adding qemu-ga.8 to the list
of DOCS to be built and the 'make install' rune did not. The
effect was that for an in-tree build we told Make to build
'docs/interop/qemu-ga.8' but did not provide a specific rule for
doing so, which caused Make to fall back to the old rules.make
rule for building any "%.8" file. Make tried to invoke texi2pod
with a bogus command line, resulting in the error:
GEN docs/interop/qemu-ga.8
No filename or title
make: *** [rules.mak:394: docs/interop/qemu-ga.8]
Fix this by using $(MANUAL_BUILDDIR) when constructing the
list of DOCS files we want to build and also in the source
file name we install for 'make install'.
(Among other things, this broke the Shippable CI builds.)
Fixes: 27a296fce9
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190919155957.12618-1-peter.maydell@linaro.org
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently the Avocado framework does not distinct the time spent
downloading assets vs. the time spent running a test. With big
assets (like a full VM image) the tests likely fail.
This is a limitation known by the Avocado team.
Until this issue get fixed, do not run this tests automatically.
Tests can still be run setting the AVOCADO_TIMEOUT_EXPECTED
environment variable.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918122748.2144-1-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This dependency is currently "automagic", which is bad for distributions.
Signed-off-by: James Le Cuirot <chewi@gentoo.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190914145155.19360-1-chewi@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
machdep.cacheline_size is an integer, not a long. Since PowerPC is
big-endian this causes sysctlbyname() to fill in the upper bits of the
argument, rather than the correct 'lower bits' of the word. Specify the
correct type to fix this.
Fixes: b255b2c8a5 ("util: add cacheinfo")
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Justin Hibbits <chmeeedalf@gmail.com>
Message-Id: <20190821082546.5252-2-laurent@vivier.eu>
This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:
* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.
This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.
This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.
Changes since v2 (never made it to the list):
* Sets the sifive_u machine default core count to 2 instead of 5.
Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:
* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.
-----BEGIN PGP SIGNATURE-----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=yDSj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.2-sf1-v3' into staging
RISC-V Patches for the 4.2 Soft Freeze, Part 1, v3
This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:
* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.
This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.
This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.
Changes since v2 (never made it to the list):
* Sets the sifive_u machine default core count to 2 instead of 5.
Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:
* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.
# gpg: Signature made Tue 17 Sep 2019 16:43:30 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-sf1-v3: (48 commits)
gdbstub: riscv: fix the fflags registers
target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point
target/riscv: Fix mstatus dirty mask
target/riscv: Use both register name and ABI name
riscv: sifive_u: Update model and compatible strings in device tree
riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
riscv: sifive_u: Fix broken GEM support
riscv: sifive_u: Instantiate OTP memory with a serial number
riscv: sifive: Implement a model for SiFive FU540 OTP
riscv: roms: Update default bios for sifive_u machine
riscv: sifive_u: Change UART node name in device tree
riscv: sifive_u: Update UART base addresses and IRQs
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
riscv: sifive_u: Add PRCI block to the SoC
riscv: sifive_u: Generate hfclk and rtcclk nodes
riscv: sifive: Implement PRCI model for FU540
riscv: sifive_u: Update PLIC hart topology configuration string
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
riscv: sifive_u: Set the minimum number of cpus to 2
riscv: hart: Add a "hartid-base" property to RISC-V hart array
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This file is version-controlled, and not generated from a .json file.
Fixes: bf582c3461
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190912184607.3507-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "access" arguments clash with a macro under Windows with MinGW:
CC m68k-softmmu/target/m68k/fpu_helper.o
target/m68k/fpu_helper.c: In function 'fmovem_predec':
target/m68k/fpu_helper.c:405:56: error: macro "access" passed 4 arguments,
but takes just 2
size = access(env, addr, &env->fregs[i], ra);
So this renames them access_fn.
Tested with:
./configure --target-list=m68k-softmmu
make -j8
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1568296920-29939-1-git-send-email-frederic.konrad@adacore.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"qemu/cutils.h" contains various qemu_strtosz_*() functions
useful to convert strings to size. It seems natural to have
the opposite usage (from size to string) there too.
The function definition is already in util/cutils.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190903120555.7551-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This makes sure reads are confined to vga video memory.
v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.
Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
At the moment this test runs on whatever the host arch is. But it looks
for 'unavailable-features' which is an x86 specific cpu property. Tag it
to always use qemu-system-x86_64.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918070654.19356-1-david@gibson.dropbear.id.au>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Event format ending with newlines confuse the trace reports.
Forbid them.
Add a check to refuse new format added with trailing newline:
$ make
[...]
GEN hw/misc/trace.h
Traceback (most recent call last):
File "scripts/tracetool.py", line 152, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 143, in main
events.extend(tracetool.read_events(fh, arg))
File "scripts/tracetool/__init__.py", line 367, in read_events
event = Event.build(line)
File "scripts/tracetool/__init__.py", line 281, in build
raise ValueError("Event format can not end with a newline character")
ValueError: Error at hw/misc/trace-events:121: Event format can not end with a newline character
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-3-philmd@redhat.com
Message-Id: <20190916095121.29506-3-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds a trace point which prints every loaded image. This includes
bios/firmware/kernel/initradmdisk/pcirom.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613050937.124903-1-aik@ozlabs.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While debugging an application with GDB the following might happen:
(gdb) return
Make xxx return now? (y or n) y
Could not fetch register "fflags"; remote failure reply 'E14'
This is because riscv_gdb_get_fpu calls riscv_csrrw_debug with a wrong csr
number (8). It should use the csr_register_map in order to reach the
riscv_cpu_get_fflags callback.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the TB_FLAGS_MSTATUS_FS macro when enabling floating point in the tb
flags.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is meant to mask off the hypervisor bits, but a typo caused it to
mask MPP instead.
Fixes: 1f0419cb04 ("target/riscv: Allow setting mstatus virtulisation bits")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use both the generic register name and ABI name for the general purpose
registers and floating point registers.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This updates model and compatible strings to use the same strings
as used in the Linux kernel device tree (hifive-unleashed-a00.dts).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In the past we did not have a model for PRCI, hence two handcrafted
clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
purpose of supplying hard-coded clock frequencies. But now since we
have added the PRCI support in QEMU, we don't need them any more.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.
Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().
Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.
Tested with upstream U-Boot and Linux kernel MACB drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This implements a simple model for SiFive FU540 OTP (One-Time
Programmable) Memory interface, primarily for reading out the
stored serial number from the first 1 KiB of the 16 KiB OTP
memory reserved by SiFive for internal use.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
