Currently IGD drivers always need to access PCH by 1f.0. But we
don't want to poke that directly to get ID, and although in real
world different GPU should have different PCH. But actually the
different PCH DIDs likely map to different PCH SKUs. We do the
same thing for the GPU. For PCH, the different SKUs are going to
be all the same silicon design and implementation, just different
features turn on and off with fuses. The SW interfaces should be
consistent across all SKUs in a given family (eg LPT). But just
same features may not be supported.
Most of these different PCH features probably don't matter to the
Gfx driver, but obviously any difference in display port connections
will so it should be fine with any PCH in case of passthrough.
So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
scenarios, 0x9cc3 for BDW(Broadwell).
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Now we retrieve VGA bios like kvm stuff in qemu but we need to
fix Device Identification in case if its not matched with the
real IGD device since Seabios is always trying to compare this
ID to work out VGA BIOS.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
[Replace pread with lseek and read to fix Windows build]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
IGD passthrough wants to supply a different pci and
host devices, inheriting i440fx devices. Make types
configurable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
- various bugfixes (css/event-facility)
- more efficient adapter interrupt routes setup
- gdb enhancement
- sclp got treated with a lot of remodelling/cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Ax4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150907' into staging
s390x fixes and improvements:
- various bugfixes (css/event-facility)
- more efficient adapter interrupt routes setup
- gdb enhancement
- sclp got treated with a lot of remodelling/cleanup
# gpg: Signature made Mon 07 Sep 2015 15:42:43 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150907: (23 commits)
s390/sclp: simplify calculation of rnmax
s390/sclp: store the increment_size in the sclp device
s390: unify allocation of initial memory
s390: move memory calculation into the sclp device
s390/sclp: ignore memory hotplug operations if it is disabled
s390: disallow memory hotplug for the s390-virtio machine
s390: no need to manually parse for slots and maxmem
s390/sclp: move sclp_service_interrupt into the sclp device
s390/sclp: move sclp_execute related functions into the SCLP class
s390/sclp: introduce a root sclp device
s390/sclp: temporarily fix unassignment/reassignment of memory subregions
s390/sclp: replace sclp event types with proper defines
s390/sclp: rework sclp event facility initialization + device realization
sclp/s390: rework sclp cpu hotplug device notification
s390x/gdb: support reading/writing of control registers
s390x/kvm: make setting of in-kernel irq routes more efficient
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: Device detection in higher subchannel sets
s390x/event-facility: fix location of receive mask
s390x/css: start with cleared cstat/dstat
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
rnmax can be directly calculated using machine->maxram_size.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's calculate it once and reuse it.
Suggested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that the calculation of the initial memory is hidden in the sclp
device, we can unify the allocation of the initial memory.
The remaining ugly part is the reserved memory for the virtio queues,
but that can be cleaned up later.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The restrictions for memory calculation belong to the sclp device.
Let's move the calculation to that point, so we are able to unify it for
both s390 machines. The sclp device is the first device to be initialized.
It performs the calculation and safely stores it in the machine, where
other parts of the system can access an reuse it.
The memory hotplug device is now only created when it is really needed.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If no memory hotplug device was created, the sclp command facility is
not exposed (SCLP_FC_ASSIGN_ATTACH_READ_STOR). We therefore have no
memory hotplug and should correctly report SCLP_RC_INVALID_SCLP_COMMAND
if any such command is executed.
This gets rid of these ugly asserts that could have been triggered
for the s390-virtio machine.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
That machine type doesn't currently support memory hotplug, so let's abort
if it is requested. Reason is, that the virtio queues are allocated for now
at the end of the initial ram - extending the ram is therefore not possible.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
ram_slots and maxram_size has already been parsed and verified by
common code for us.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's make that function a method of the new sclp device, keeping
the wrapper for existing users.
We can now let go of get_event_facility().
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the sclp_execute related functions into the SCLP class
and pass the device state as parameter, so we have easy access to
the SCLPDevice later on.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's create a root sclp device, which has other sclp devices as
children (e.g. the event facility for now) and can later be used
for migration of sclp specific attributes and setup of memory.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Commit 374f2981d1 ("memory: protect current_map by RCU") broke
unassignment of standby memory on s390x. Looks like that the new
parallelism allows races with our (semi broken) memory hotplug code. The
flatview_unref() can now be executed after our unparenting. Therefore
memory_region_unref() tries to unreference the MemoryRegion itself instead
of the parent.
In theory, MemoryRegions are now bound to separate devices that control
their lifetime. We don't have this yet, so we really want to control their
lifetime manually.
This patch fixes it temporarily, until we have a proper rework. The only
drawback is that they won't pop up in "info qom-tree", but that's better
than qemu crashes.
We have to release the reference to a memory region after a
memory_region_find, as it automatically takes a reference. As we're now
able to reassign memory, the MemoryRegion is in fact deleted (otherwise
vmstate_register_ram() would complain).
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce TYPE_SCLP_QUIESCE and make use of it. Also use
TYPE_SCLP_CPU_HOTPLUG where applicable.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current code only works by chance. The event facility is a sysbus
device, but specifies in its class structure as parent the DeviceClass
(instead of a device class).
The init function in return lies therefore at the same position as
the init function of SysBusDeviceClass and gets triggered instead -
a very bad idea of doing that (e.g. the parameter types don't match).
Let's bring the initialization code up to date, initializing the event
facility + child events in .instance_init and moving the realization of
the child events out of the init call, into the realization step.
Device realization is now automatically performed when the event facility
itself is realized. That realization implicitly triggers realization of
the child bus, which in turn initializes the events.
Please note that we have to manually propagate the realization of the bus
children, common code still has a TODO set for that task.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's get rid of this strange local variable + irq logic and
work directly on the QOM. (hint: what happens if two such devices
are created?)
We could introduce proper QOM class + state for the cpu hotplug device,
however that would result in too much overhead for a simple
"trigger_signal" function.
Also remove one unnecessary class function initialization.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's support reading and writing of control registers for kvm and tcg.
We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When we add new adapter routes we call kvm_irqchip_add_route() for every
virtqueue and in the same step also do the KVM_SET_GSI_ROUTING ioctl.
This is unnecessary costly as the interface allows us to set multiple
routes in one go. Let's first add all routes to the table stored in the
global kvm_state and then do the ioctl to commit the routes to the
in-kernel irqchip.
This saves us several ioctls to the kernel where for each call a list
is reallocated and populated.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If no bootdevice was specified, we try to autodetect a suitable IPL
device. Current code only searched in subchannel set 0; extend this
search to higher subchannel sets as well.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For read event mask, we assumed that the layout of the sccb was
|sccb header|event buffer header|receive mask|...|
The correct layout, however, is
|sccb header|receive mask|...|
as in-buffer and
|sccb header|event buffer header|...|
as out-buffer.
Fix this: This makes selective read work.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When executing the start function, we should start with a clear state
regarding subchannel and device status; it is easy to forget updating one
of them after the ccw has been processed.
Note that we don't need to care about resetting the various control
fields: They are cleared by tsch(), and if they were still pending,
we wouldn't be able to execute the start function in the first
place.
Also note that we don't want to clear cstat/dstat if a suspended
subchannel is resumed.
This fixes a bug where we would continue to present channel-program
check in cstat even though later ccw requests for the subchannel
finished without error (i.e. cstat should be 0).
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
For selective read event, we need to check if any event is requested
that is not active instead of whether none of the requested events is
active.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Type-0 ccws need to have a count > 0 for any command other than TIC.
Generate a channel-program check if this is not the case.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In CCW-0 format TIC command 4 highest bits are ignored in the subchannel.
In CCW-1 format the TIC command 4 highest bits must be 0.
To convert TIC from CCW-0 to CCW-1 we clear the 4 highest bits
to guarantee compatibility.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Since the pow2floor() function is now used in a hot code path,
make it inline; for consistency, provide pow2ceil() as an inline
function too.
Because these functions use ctz64() we have to put the inline
versions into host-utils.h, so they have access to ctz64(),
and move the inline is_power_of_2() along with them.
We then need to include host-utils.h from qemu-common.h so that
the files which use these functions via qemu-common.h still have
access to them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1437741192-20955-7-git-send-email-peter.maydell@linaro.org
Use pow2floor() to round down to the nearest power of 2,
rather than an inline calculation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1437741192-20955-5-git-send-email-peter.maydell@linaro.org
Use pow2ceil() to round up to the next power of 2, rather
than an inline calculation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1437741192-20955-4-git-send-email-peter.maydell@linaro.org
Use the utility function pow2ceil() for rounding up to the next
largest power of 2, rather than inline calculation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1437741192-20955-3-git-send-email-peter.maydell@linaro.org
A couple of places in hw/pci use an inline calculation to round a
size up to the next largest power of 2. We have a utility routine
for this, so use it.
(The behaviour of the old code is different if the size value
is 0 -- it would leave it as 0 rather than rounding up to 1,
but in both cases we know the size can't be 0.
In the case where the size value had bit 31 set, the old code
would invoke undefined behaviour; the new code will give a
result of 0. Presumably that could never happen either.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1437741192-20955-2-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJV6fTdAAoJEH8JsnLIjy/WniYP/iSJcVpTj/nEGDPDVrAGAldE
W3CiFSRbaFTiLvYXp7MDRv5+tV5+ttykhhRlWjOx5BgU616zHh0IiVxuvvGwwCdM
wl84TpqZ0tUvPFtvZOFE96JS3jcgbz2nu0PA4axIKeIL7aG7L4te35L7Bq7jGwjM
qrJ5Fg6B4f9Ji8vhphbmCdeZ5slc/mRE7vMAn+5flxvInl3oLexcSUQ9+LZ0iYS5
ktmGjGNQq1f0Z83hY6k6JKodz0THOPjVh5+seKaJSJjUVpxsMhj+xLDYtEnR2CwV
13ObNTozStu4IYThD9ydoG2qSFnQGbnn+TrDuyJrhor5wZlmSXolwDGu3qthbBro
tW9WnvK9fpVPEEyfDNs9NnKiYFERchbgckqTz7MxWJMCdXdPcYIAzFO2SlO1Mznl
Kv4nEJouOP2CCq/Q6FmUD585uOM8QculKn1Mx8XdPVFvkoYKsvxXWcqRLsf29/Az
PCt09br+WQE6vbEIGuQjcgBSAgkUDwcuH7jqsyeoiRuKZdAUVyIpsgl4GT28HHk9
NE8R1TQoBi+4iOvPTWltoSGKi4pj9svqKuHA2YjIaUQtQ18oZleBhVz9Ugm4BFIM
Se3vUVDKiCNidEITxAmU24ZEXyS+3yTKQQzrvO9zT/b4HJHkOq7I9WIRyqRagCpX
oBTcbZ9QuuYYF3Z9f2Wi
=4Pz4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 04 Sep 2015 20:45:33 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
quorum: validate vote threshold against num_children even if read-pattern is fifo
qcow2: reorder fields in Qcow2CachedTable to reduce padding
docs: document how to configure the qcow2 L2/refcount caches
qcow2: add option to clean unused cache entries after some time
qcow2: mark the memory as no longer needed after qcow2_cache_empty()
iotests: Warn if python subprocess is killed
iotests: Do not suppress segfaults in bash tests
iotests: Respect -nodefaults in tests 41 and 55
iotests: More options for VM.add_drive()
qemu-img: Fix crash in amend invocation
block/raw-posix: Use raw_normalize_devicepath()
qemu-iotests: s390x: fix test 130
qemu-iotests: s390x: fix test 049, reject negative sizes in QemuOpts
qemu-iotests: s390x: fix test 041 and 055
qemu-iotests: disable default qemu devices for cross-platform compatibility
qemu-iotests: qemu machine type support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At least with KVM, currently there's no reason why QEMU would not be
capable of handling Aff3 != 0. This commit fixes up FDT creation in such
a case.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: eef5a86e6d9a313780dbc23b35fcb65df42a3e9e.1441366248.git.p.fedin@samsung.com
[PMM: folded two overlong lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduces reusable definitions for CPU affinity masks/shifts and gets rid
of hardcoded magic numbers.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 7e6def4d0d91ae64615cdd2035b94d408d0a23c6.1441366248.git.p.fedin@samsung.com
[PMM: folded overlong line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is
not present on the real 3DS PDK board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested by booting a minimal Linux system on the emulated platform
Tested by booting the Xvisor hypervisor on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d27347300d253509d921bc27a6d0a14db877478b.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The slave mode is not implemented.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
