On reset the bus will reset the card,
we can now drop the device_reset() call.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180216022933.10945-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
using the sdbus_*() API.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20180216022933.10945-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create the SDCard in the realize() function.
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20180216022933.10945-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20180216022933.10945-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some register blocks of the ast2500 are protected by protection key
registers which require the right magic value to be written to those
registers to allow those registers to be mutated.
Register manuals indicate that writing the correct magic value to these
registers should cause subsequent reads from those values to return 1,
and writing any other value should cause subsequent reads to return 0.
Previously, qemu implemented these registers incorrectly: the registers
were handled as simple memory, meaning that writing some value x to a
protection key register would result in subsequent reads from that
register returning the same value x. The protection was implemented by
ensuring that the current value of that register equaled the magic
value.
This modifies qemu to have the correct behaviour: attempts to write to a
ast2500 protection register results in a transition to 1 or 0 depending
on whether the written value is the correct magic. The protection logic
is updated to ensure that the value of the register is nonzero.
This bug caused deadlocks with u-boot HEAD: when u-boot is done with a
protectable register block, it attempts to lock it by writing the
bitwise inverse of the correct magic value, and then spinning forever
until the register reads as zero. Since qemu implemented writes to these
registers as ordinary memory writes, writing the inverse of the magic
value resulted in subsequent reads returning that value, leading to
u-boot spinning forever.
Signed-off-by: Hugo Landau <hlandau@devever.net>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180220132627.4163-1-hlandau@devever.net
[PMM: fixed incorrect code indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I/O currently being synchronous, there is no reason to ever clear the
SR_TXE bit. However the SR_TC bit may be cleared by software writing
to the SR register, so set it on each write.
In addition, fix the reset value of the USART status register.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
[PMM: removed XXX tag from comment, since it isn't something
we need to come back and fix in QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a "raspi3" machine type, which can now be selected as
the machine to run on by users via the "-M" command line option to QEMU.
The machine type does *not* ignore memory transaction failures so we
likely need to add some dummy devices later when people run something
more complicated than what I'm using for testing.
Signed-off-by: Pekka Enberg <penberg@iki.fi>
[PMM: added #ifdef TARGET_AARCH64 so we don't provide the 64-bit
board in the 32-bit only arm-softmmu build.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The register definitions for VMIDR and VMPIDR have separate
reginfo structs for the AArch32 and AArch64 registers. However
the 32-bit versions are wrong:
* they use offsetof instead of offsetoflow32 to mark where
the 32-bit value lives in the uint64_t CPU state field
* they don't mark themselves as ARM_CP_ALIAS
In particular this means that if you try to use an Arm guest CPU
which enables EL2 on a big-endian host it will assert at reset:
target/arm/cpu.c:114: cp_reg_check_reset: Assertion `oldvalue == newvalue' failed.
because the reset of the 32-bit register writes to the top
half of the uint64_t.
Correct the errors in the structures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
This is necessary for 'make check' to pass on big endian
systems with the 'raspi3' board enabled, which is the
first board which has an EL2-enabled-by-default CPU.
- shared common code path float16/32/64
- well commented and easy to follow code
- added a bunch of float16 support
While some operations are slower the key ones exercised by the
floating point dbt-bench are the same: https://i.imgur.com/oXNJNql.png
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJajU1+AAoJEPvQ2wlanipEg3gH/jzOmmJm5URYPmBBYqG4LbOO
jZVUP8mfRT/xEHvD0BExXFevF2Be+YzqKoEyspcJTgjKKjvhc/t0rgC3umEib7H+
r/kzpGB4C9YodO4sXqPUJQHWnfjAvRE6VJKW+KaRhvxQAmo3pt2e01xxPCcqCfLx
ww8ASGxnPn8NgWmOOt+8BIO5wm/9bU/2Fg0blyqVEh8x97wGR+YV/H2B6PtEjkHo
3Wba/zK0kq3wyw+J4VeHg+ODaR0kfBGjF+VQ3NJOhk7IW1Tztm+Jb80ShnIWzA3y
WhiY1sbj009uJEbaG6ImUm1WN0rMvMnV2b72bK1bc/HREU7SJfQxAoSHGh54Pc8=
=/kJP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-softfloat-refactor-210218-1' into staging
This is the re-factor of softfloat:
- shared common code path float16/32/64
- well commented and easy to follow code
- added a bunch of float16 support
While some operations are slower the key ones exercised by the
floating point dbt-bench are the same: https://i.imgur.com/oXNJNql.png
# gpg: Signature made Wed 21 Feb 2018 10:44:14 GMT
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-softfloat-refactor-210218-1: (22 commits)
fpu/softfloat: re-factor sqrt
fpu/softfloat: re-factor compare
fpu/softfloat: re-factor minmax
fpu/softfloat: re-factor scalbn
fpu/softfloat: re-factor int/uint to float
fpu/softfloat: re-factor float to int/uint
fpu/softfloat: re-factor round_to_int
fpu/softfloat: re-factor muladd
fpu/softfloat: re-factor div
fpu/softfloat: re-factor mul
fpu/softfloat: re-factor add/sub
fpu/softfloat: define decompose structures
fpu/softfloat: move the extract functions to the top of the file
fpu/softfloat: improve comments on ARM NaN propagation
include/fpu/softfloat: add some float16 constants
include/fpu/softfloat: implement float16_set_sign helper
include/fpu/softfloat: implement float16_chs helper
include/fpu/softfloat: implement float16_abs helper
target/*/cpu.h: remove softfloat.h
fpu/softfloat-types: new header to prevent excessive re-builds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a little bit of a departure from softfloat's original approach
as we skip the estimate step in favour of a straight iteration. There
is a minor optimisation to avoid calculating more bits of precision
than we need however this still brings a performance drop, especially
for float64 operations.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The compare function was already expanded from a macro. I keep the
macro expansion but move most of the logic into a compare_decomposed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Let's do the same re-factor treatment for minmax functions. I still
use the MACRO trick to expand but now all the checking code is common.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is one of the simpler manipulations you could make to a floating
point number.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
These are considerably simpler as the lower order integers can just
use the higher order conversion function. As the decomposed fractional
part is a full 64 bit rounding and inexact handling comes from the
pack functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We share the common int64/uint64_pack_decomposed function across all
the helpers and simply limit the final result depending on the final
size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We can now add float16_round_to_int and use the common round_decomposed and
canonicalize functions to have a single implementation for
float16/32/64 round_to_int functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We can now add float16_muladd and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 muladd functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We can now add float16_div and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 versions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We can now add float16_mul and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 versions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We can now add float16_add/sub and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 add and sub functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These structures pave the way for generic softfloat helper routines
that will operate on fully decomposed numbers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is pure code-motion during re-factoring as the helpers will be
needed earlier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Mention the pseudo-code fragment from which this is based.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This defines the same set of common constants for float 16 as defined
for 32 and 64 bit floats. These are often used by target helper
functions. I've also removed constants that are not used by anybody.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This will be required when expanding the MINMAX() macro for 16
bit/half-precision operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The main culprit here is bswap.h which pulled in softfloat.h so it
could use the types in its CPU_Float* and ldfl/stfql functions. As
bswap.h is very widely included this added a compile dependency every
time we touch softfloat.h. Move the typedefs for each float type into
their own file so we don't re-build the world every time we tweak the
main softfloat.h header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It's not actively built and when enabled things fail to compile. I'm
not sure the type-checking is really helping here. Seeing as we "own"
our softfloat now lets remove the cruft.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This will be required when expanding the MINMAX() macro for 16
bit/half-precision operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fill the terminal box from right to left to avoid
Gtk-WARNING **: Allocating size to GtkScrollbar 0x55f6d54b0200 without
calling gtk_widget_get_preferred_width/height(). How does the code
know the size to allocate?
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 902aaef8-d20e-0530-dea2-cdfe3db33ff3@web.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch over all leftover users to qapi DisplayType.
Then delete the unused display_type variable.
Add 'default' DisplayType, which isn't an actual display type but
a placeholder for "user didn't specify a display". It will be replaced
by the DisplayType actually used, which in turn depends on the
DisplayTypes availabel in the particular build.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-13-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch over the one leftover user to qapi DisplayType.
The delete the unused request_opengl variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-12-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not used any more, delete it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-11-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not used any more, delete it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180202111022.19269-7-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qapi DisplayType will replace the current enum. For the transition both
will coexist though, so rename it so we don't have a name clash.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-4-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Leak found thanks to ASAN:
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x55995789ac90 in __interceptor_malloc (/home/elmarco/src/qemu/build/x86_64-softmmu/qemu-system-x86_64+0x1510c90)
#1 0x7f0a91190f0c in g_malloc /home/elmarco/src/gnome/glib/builddir/../glib/gmem.c:94
#2 0x5599580a281c in v9fs_path_copy /home/elmarco/src/qemu/hw/9pfs/9p.c:196:17
#3 0x559958f9ec5d in coroutine_trampoline /home/elmarco/src/qemu/util/coroutine-ucontext.c:116:9
#4 0x7f0a8766ebbf (/lib64/libc.so.6+0x50bbf)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
lhs/rhs doesn't tell much about how argument are handled, dst/src is
and const arguments is clearer in my mind. Use g_memdup() while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
