Commit Graph

82155 Commits

Author SHA1 Message Date
David Hildenbrand
c726aa6941 memory-device: Add get_min_alignment() callback
Add a callback that can be used to express additional alignment
requirements (exceeding the ones from the memory region).

Will be used by virtio-mem to express special alignment requirements due
to manually configured, big block sizes (e.g., 1GB with an ordinary
memory-backend-ram). This avoids failing later when realizing, because
auto-detection wasn't able to assign a properly aligned address.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201008083029.9504-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03 07:19:26 -05:00
David Hildenbrand
780a4d24e7 memory-device: Support big alignment requirements
Let's warn instead of bailing out - the worst thing that can happen is
that we'll fail hot/coldplug later. The user got warned, and this should
be rare.

This will be necessary for memory devices with rather big (user-defined)
alignment requirements - say a virtio-mem device with a 2G block size -
which will become important, for example, when supporting vfio in the
future.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201008083029.9504-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03 07:19:26 -05:00
David Hildenbrand
228957fea3 virtio-mem: Probe THP size to determine default block size
Let's allow a minimum block size of 1 MiB in all configurations. Select
the default block size based on
- The page size of the memory backend.
- The THP size if the memory backend size corresponds to the real host
  page size.
- The global minimum of 1 MiB.
and warn if something smaller is configured by the user.

VIRTIO_MEM only supports Linux (depends on LINUX), so we can probe the
THP size unconditionally.

For now we only support virtio-mem on x86-64 - there isn't a user-visible
change (x86-64 only supports 2 MiB THP on the PMD level) - the default
was, and will be 2 MiB.

If we ever have THP on the PUD level (e.g., 1 GiB THP on x86-64), we
expect it to be more transparent - e.g., to only optimize fully populated
ranges unless explicitly told /configured otherwise (in contrast to PMD
THP).

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201008083029.9504-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03 07:19:26 -05:00
David Hildenbrand
0aed280061 virtio-mem: Make sure "usable_region_size" is always multiples of the block size
The spec states:
  "The device MUST set addr, region_size, usable_region_size, plugged_size,
   requested_size to multiples of block_size."

With block sizes > 256MB, we currently wouldn't guarantee that for the
usable_region_size.

Note that we cannot exceed the region_size, as we already enforce the
alignment there properly.

Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201008083029.9504-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03 07:19:26 -05:00
David Hildenbrand
d31992ae13 virtio-mem: Make sure "addr" is always multiples of the block size
The spec states:
  "The device MUST set addr, region_size, usable_region_size, plugged_size,
   requested_size to multiples of block_size."

In some cases, we currently don't guarantee that for "addr": For example,
when starting a VM with 4 GiB boot memory and a virtio-mem device with a
block size of 2 GiB, "memaddr"/"addr" will be auto-assigned to
0x140000000 (5 GiB).

We'll try to improve auto-assignment for memory devices next, to avoid
bailing out in case memory device code selects a bad address.

Note: The Linux driver doesn't support such big block sizes yet.

Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201008083029.9504-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03 07:19:26 -05:00
Michael S. Tsirkin
54420332b5 pc: comment style fixup
Fix up checkpatch comment style warnings.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chen Qun <kuhn.chenqun@huawei.com>
2020-11-03 07:19:26 -05:00
Peter Maydell
c7a7a877b7 target-arm queue:
* target/arm: Fix Neon emulation bugs on big-endian hosts
  * target/arm: fix handling of HCR.FB
  * target/arm: fix LORID_EL1 access check
  * disas/capstone: Fix monitor disassembly of >32 bytes
  * hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
  * hw/arm/boot: fix SVE for EL3 direct kernel boot
  * hw/display/omap_lcdc: Fix potential NULL pointer dereference
  * hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
  * target/arm: Get correct MMU index for other-security-state
  * configure: Test that gio libs from pkg-config work
  * hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
  * docs: Fix building with Sphinx 3
  * tests/qtest/npcm7xx_rng-test: Disable randomness tests
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl+gPSwZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rBwD/9kNodk0LilJEbE/UVL5niv
 EnLo0xo+qFx8jPR19VVG6Cp3mBwwImV7MVebAuuh6cgzdyofKwpd03h/XMwIOY0T
 gHlfk/npJnob/7bambBU5UTAZnOHj8EnuCwTKq3AuRROdi35p4OqDZTxAYNNJNQa
 1dRRTEODxuPRi/bmwuYLp1esrjXlJa5KSlv+3gjunVG+uEJ6ygHJOZlgJ22704D/
 2IB3rrtwx/oYBsaQCd9TQ/uIVgkvfRo1feQp5/ukeb4nYDNWtjkk5usPYcGh7h5P
 dCgneinXvyTqZXgk9FpT25rVrp01IBZXNkGjEy/HMmpib6ABsKGywBQfif4ZQXc7
 KlO+A8yCvAvRuJcjsVMV71z9j0MIu5eU9aOW7Oqu/ORMnRSlEionCypPaO3J/kF2
 e6XoGQZJaziIo5hg8hxyALcKKtpwgd2ckAdNxQhw3vsNA7uDe1acs6BzJbiT1J1o
 05zZs6Xy4OheHkFGOKoZyVAmSCsfwqgaHspl62owCRrNcT8URLzGpjEal+l4+FHN
 8kMs012aiOSkDAWldPH2hjt0sYV/F4bVDID4PZj5Cwrz9lXQyq8e8Lw6WUvqXEzf
 Kgl/XVu9mZx4wMWLNg78cneXbM+RQNmJsWMMA/qZn5Lh2p/73a1jA9vjRBl406Tt
 RW00VEbywkOYtj1EZKdgqw==
 =PdV9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201102' into staging

target-arm queue:
 * target/arm: Fix Neon emulation bugs on big-endian hosts
 * target/arm: fix handling of HCR.FB
 * target/arm: fix LORID_EL1 access check
 * disas/capstone: Fix monitor disassembly of >32 bytes
 * hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
 * hw/arm/boot: fix SVE for EL3 direct kernel boot
 * hw/display/omap_lcdc: Fix potential NULL pointer dereference
 * hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
 * target/arm: Get correct MMU index for other-security-state
 * configure: Test that gio libs from pkg-config work
 * hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
 * docs: Fix building with Sphinx 3
 * tests/qtest/npcm7xx_rng-test: Disable randomness tests

# gpg: Signature made Mon 02 Nov 2020 17:09:00 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201102: (26 commits)
  tests/qtest/npcm7xx_rng-test: Disable randomness tests
  qemu-option-trace.rst.inc: Don't use option:: markup
  scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments
  hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
  configure: Test that gio libs from pkg-config work
  target/arm: Get correct MMU index for other-security-state
  hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
  hw/display/omap_lcdc: Fix potential NULL pointer dereference
  hw/arm/boot: fix SVE for EL3 direct kernel boot
  hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
  disas/capstone: Fix monitor disassembly of >32 bytes
  target/arm: fix LORID_EL1 access check
  target/arm: fix handling of HCR.FB
  target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts
  target/arm: Fix float16 pairwise Neon ops on big-endian hosts
  target/arm: Improve do_prewiden_3d
  target/arm: Simplify do_long_3d and do_2scalar_long
  target/arm: Rename neon_load_reg64 to vfp_load_reg64
  target/arm: Add read/write_neon_element64
  target/arm: Rename neon_load_reg32 to vfp_load_reg32
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-03 10:38:05 +00:00
Peter Maydell
8545ae485b Migration and virtiofs fixes 2020-11-02
Fixes for postcopy migration test hang
 A seccomp crash for virtiofsd on some !x86
 Help message and minor CID fix
 
 And another crack at Max's set.
 
 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAl+gZBMACgkQBRYzHrxb
 /edu+RAAh3BWSTONFjZ0s4vb1mn9DNDJmkUB80Yz6wZUEma7KrUhfy7/gjqaASn9
 Qrz++c3V3zLJ0AAzRWVA6iPG2fdaq6UAP4o/hIVRKtdafD4+kpOFm9M4QClWpakr
 xY24B8es0iQK8rPDeKSzL/XLeDZ0rFxeMTjV3ldK1TbzzY5K8ud9EurIohJZVenr
 slxjeGEudbOwNaEhHximHPr4OunTy40oeDPvfbDuIwTOl9reVDr5hkYx2WA9ncei
 dTeWZ7wKZinPI5lO3Or/LfF8QyKUMDjHq4Zlbzmx8p8syfrDD5PPRo9crdnrAsDW
 nMyP2/WKDf0diLMvt7qVO7XIHYgHU2L1XZXt3XhIzk2/ZxwH9Sw5fj9Iaw9qdGQ2
 AyvIWiUKk2/G3NUAKNoCMQJGG9+QOgCmQMDAyA7vu/z8L+ypPUabdSNDARzkvgcC
 obz1mbIZjvgdsqVNn8vj8wuzlpnEjoYujG8CVC+VuWSIWIFwY/Q5hl8QNxP6VdqM
 jSDlHtGGflQIjeHB5sZkgFV+BN2um8zJgZvgG7HMwATumSWNLYHZVnnGsjTHrcO9
 R0i4NiQDCOa9I9dboKPbErvkWFmDlt35m88GSccKeffASl2o1QdEV4n0jEyE+TGZ
 jYVwwxXrS/n5uCLVweUdU28RzNMubRz3GjsrzYN2MZnldKD5WEs=
 =cbDl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into staging

Migration and virtiofs fixes 2020-11-02

Fixes for postcopy migration test hang
A seccomp crash for virtiofsd on some !x86
Help message and minor CID fix

And another crack at Max's set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Mon 02 Nov 2020 19:54:59 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201102a:
  tests/acceptance: Add virtiofs_submounts.py
  tests/acceptance/boot_linux: Accept SSH pubkey
  virtiofsd: Announce sub-mount points
  virtiofsd: Add mount ID to the lo_inode key
  meson.build: Check for statx()
  virtiofsd: Add attr_flags to fuse_entry_param
  virtiofsd: Check FUSE_SUBMOUNTS
  virtiofsd: Fix the help message of posix lock
  tools/virtiofsd: Check vu_init() return value (CID 1435958)
  virtiofsd: Seccomp: Add 'send' for syslog
  migration: Postpone the kick of the fault thread after recover
  migration: Unify reset of last_rb on destination node when recover

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 20:29:50 +00:00
Max Reitz
af1bb3fe7f tests/acceptance: Add virtiofs_submounts.py
This test invokes several shell scripts to create a random directory
tree full of submounts, and then check in the VM whether every submount
has its own ID and the structure looks as expected.

(Note that the test scripts must be non-executable, so Avocado will not
try to execute them as if they were tests on their own, too.)

Because at this commit's date it is unlikely that the Linux kernel on
the image provided by boot_linux.py supports submounts in virtio-fs, the
test will be cancelled if no custom Linux binary is provided through the
vmlinuz parameter.  (The on-image kernel can be used by providing an
empty string via vmlinuz=.)

So, invoking the test can be done as follows:
$ avocado run \
    tests/acceptance/virtiofs_submounts.py \
    -p vmlinuz=/path/to/linux/build/arch/x86/boot/bzImage

This test requires root privileges (through passwordless sudo -n),
because at this point, virtiofsd requires them.  (If you have a
timestamp_timeout period for sudoers (e.g. the default of 5 min), you
can provide this by executing something like "sudo true" before invoking
Avocado.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201102161859.156603-8-mreitz@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:23:48 +00:00
Max Reitz
0a7798037a tests/acceptance/boot_linux: Accept SSH pubkey
Let download_cloudinit() take an optional pubkey, which subclasses of
BootLinux can pass through setUp().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-7-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:51 +00:00
Max Reitz
9d82f6a3e6 virtiofsd: Announce sub-mount points
Whenever we encounter a directory with an st_dev or mount ID that
differs from that of its parent, we set the FUSE_ATTR_SUBMOUNT flag so
the guest can create a submount for it.

We only need to do so in lo_do_lookup().  The following functions return
a fuse_attr object:
- lo_create(), though fuse_reply_create(): Calls lo_do_lookup().
- lo_lookup(), though fuse_reply_entry(): Calls lo_do_lookup().
- lo_mknod_symlink(), through fuse_reply_entry(): Calls lo_do_lookup().
- lo_link(), through fuse_reply_entry(): Creating a link cannot create a
  submount, so there is no need to check for it.
- lo_getattr(), through fuse_reply_attr(): Announcing submounts when the
  node is first detected (at lookup) is sufficient.  We do not need to
  return the submount attribute later.
- lo_do_readdir(), through fuse_add_direntry_plus(): Calls
  lo_do_lookup().

Make announcing submounts optional, so submounts are only announced to
the guest with the announce_submounts option.  Some users may prefer the
current behavior, so that the guest learns nothing about the host mount
structure.

(announce_submounts is force-disabled when the guest does not present
the FUSE_SUBMOUNTS capability, or when there is no statx().)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-6-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:51 +00:00
Max Reitz
d672fce6ba virtiofsd: Add mount ID to the lo_inode key
Using st_dev is not sufficient to uniquely identify a mount: You can
mount the same device twice, but those are still separate trees, and
e.g. by mounting something else inside one of them, they may differ.

Using statx(), we can get a mount ID that uniquely identifies a mount.
If that is available, add it to the lo_inode key.

Most of this patch is taken from Miklos's mail here:
https://marc.info/?l=fuse-devel&m=160062521827983
(virtiofsd-use-mount-id.patch attachment)

Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-5-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:50 +00:00
Max Reitz
84e319a575 meson.build: Check for statx()
Check whether the glibc provides statx() and if so, define CONFIG_STATX.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-4-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:49 +00:00
Max Reitz
93e79851ab virtiofsd: Add attr_flags to fuse_entry_param
fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.

fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-3-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:48 +00:00
Max Reitz
9c6ac04363 virtiofsd: Check FUSE_SUBMOUNTS
FUSE_SUBMOUNTS is a pure indicator by the kernel to signal that it
supports submounts.  It does not check its state in the init reply, so
there is nothing for fuse_lowlevel.c to do but to check its existence
and copy it into fuse_conn_info.capable.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-2-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 19:22:06 +00:00
Jiachen Zhang
0429eaf518 virtiofsd: Fix the help message of posix lock
The commit 88fc107956 disabled remote
posix locks by default. But the --help message still says it is enabled
by default. So fix it to output no_posix_lock.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Message-Id: <20201027081558.29904-1-zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:43:19 +00:00
Philippe Mathieu-Daudé
2693026042 tools/virtiofsd: Check vu_init() return value (CID 1435958)
Since commit 6f5fd83788, vu_init() can fail if malloc() returns NULL.

This fixes the following Coverity warning:

  CID 1435958 (#1 of 1): Unchecked return value (CHECKED_RETURN)

Fixes: 6f5fd83788 ("libvhost-user: support many virtqueues")
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201102092339.2034297-1-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:32:41 +00:00
Dr. David Alan Gilbert
dcaac9f124 virtiofsd: Seccomp: Add 'send' for syslog
On ppc, and some other archs, it looks like syslog ends up using 'send'
rather than 'sendto'.

Reference: https://github.com/kata-containers/kata-containers/issues/1050

Reported-by: amulmek1@in.ibm.com
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102150750.34565-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:29:54 +00:00
Peter Xu
5e77343113 migration: Postpone the kick of the fault thread after recover
The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery.  However it is also the 1st place to initiate the page
request from the main thread.

One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe.  So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.

Postpone the wake up operation after the sync of faulted addresses.

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:25:48 +00:00
Peter Xu
cc5ab87200 migration: Unify reset of last_rb on destination node when recover
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.

Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.

This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now.  Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.

(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
 a mark that when picking up 0c26781c09 we'd better have this one too; the real
 fix will come later)

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-02 18:25:39 +00:00
Peter Maydell
8680d6e364 nvme pull 2 Nov 2020
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE28EdLTc7SjdV9QLsYlFWYQpPbMAFAl+gI74ACgkQYlFWYQpP
 bMCBrA/9GXMZZGDfHFenXF+rS6J+ZKxtk29vq9Ly8KZ9YW7CzF9MP8qE/5iyFfmx
 d1BknXGQerW2kAzpkOq2/MKDklOc+0BAhaTdUaFR/ao5ZKuv2LQ8uFnKVoTrhTx9
 +HVkTVUTnez6ReCZVIrtN4+XVdyQTeQotJg6H2m5Q/BxQKcj6OMOlneuSGDn5vFN
 EWgDvEmfFEkzbN8FMXtkT35bg3vA5TGmfQRMk1SMMREOPxF04CaTVTxYscCpS0WC
 Cl+62mx4XLjscK7hwXuTNTrxeOLxZ2xLK5dhDd/qxBveio07mIM5X2psdKR0t5qX
 HLtm437T9CAYmyo8jgvM4KL8f+rbJnLd579qyVwIMsue28Qisj9nuWCTcaEpjfck
 4krhxJwxenRtqQ9wYrnbnQI5yQDIE6iUGf0toXwCNdJIr+FvyIcT7vJtTzZXtRI8
 sxwK5wfJ/WSey9uNLZGFbQuv4vjOMV+Nk3mEi1gUV8ujogo+2U6WUAE3NhqFLKn1
 YT6AJhDZvqL1f8gFrbiqR8xwvPrYmwK/tK38X1exSDOqiB7UNzR/apAb1oniul0e
 rS5xWzIs9APvkdWQssCHvrVDdh6VISXQ5bnT8lkfmvYrCTn2gUGAFXDrxZjXIaL9
 scCr8N9STkHmoYpc2ACRKIpfK3E1sDjGA8mAPemkxsLakNwBS4o=
 =s4KC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg:                using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg:                 aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg:                 aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5  02EC 6251 5661 0A4F 6CC0

* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
  hw/block/nvme: fix queue identifer validation
  hw/block/nvme: fix create IO SQ/CQ status codes
  hw/block/nvme: fix prp mapping status codes
  hw/block/nvme: report actual LBA data shift in LBAF
  hw/block/nvme: add trace event for requests with non-zero status code
  hw/block/nvme: add nsid to get/setfeat trace events
  hw/block/nvme: reject io commands if only admin command set selected
  hw/block/nvme: support for admin-only command set
  hw/block/nvme: validate command set selected
  hw/block/nvme: support per-namespace smart log
  hw/block/nvme: fix log page offset check
  hw/block/nvme: remove pointless rw indirection
  hw/block/nvme: update nsid when registered
  hw/block/nvme: change controller pci id
  pci: allocate pci id for nvme
  hw/block/nvme: support multiple namespaces
  hw/block/nvme: refactor identify active namespace id list
  hw/block/nvme: add support for sgl bit bucket descriptor
  hw/block/nvme: add support for scatter gather lists
  hw/block/nvme: harden cmb access
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 17:17:29 +00:00
Peter Maydell
ffb4fbf90a tests/qtest/npcm7xx_rng-test: Disable randomness tests
The randomness tests in the NPCM7xx RNG test fail intermittently
but fairly frequently. On my machine running the test in a loop:
 while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done

will fail in less than a minute with an error like:
ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs:
assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01)

(Failures have been observed on all 4 of the randomness tests,
not just first_byte_runs.)

It's not clear why these tests are failing like this, but intermittent
failures make CI and merge testing awkward, so disable running them
unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when
running the test suite, until we work out the cause.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201102152454.8287-1-peter.maydell@linaro.org
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
2020-11-02 16:52:18 +00:00
Peter Maydell
5a4b0d4112 qemu-option-trace.rst.inc: Don't use option:: markup
Sphinx 3.2 is pickier than earlier versions about the option:: markup,
and complains about our usage in qemu-option-trace.rst:

../../docs/qemu-option-trace.rst.inc:4:Malformed option description
  '[enable=]PATTERN', should look like "opt", "-opt args", "--opt args",
  "/opt args" or "+opt args"

In this file, we're really trying to document the different parts of
the top-level --trace option, which qemu-nbd.rst and qemu-img.rst
have already introduced with an option:: markup.  So it's not right
to use option:: here anyway.  Switch to a different markup
(definition lists) which gives about the same formatted output.

(Unlike option::, this markup doesn't produce index entries; but
at the moment we don't do anything much with indexes anyway, and
in any case I think it doesn't make much sense to have individual
index entries for the sub-parts of the --trace option.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-3-peter.maydell@linaro.org
2020-11-02 16:52:18 +00:00
Peter Maydell
92bb29f9b2 scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments
The kerneldoc script currently emits Sphinx markup for a macro with
arguments that uses the c:function directive. This is correct for
Sphinx versions earlier than Sphinx 3, where c:macro doesn't allow
documentation of macros with arguments and c:function is not picky
about the syntax of what it is passed. However, in Sphinx 3 the
c:macro directive was enhanced to support macros with arguments,
and c:function was made more picky about what syntax it accepted.

When kerneldoc is told that it needs to produce output for Sphinx
3 or later, make it emit c:function only for functions and c:macro
for macros with arguments. We assume that anything with a return
type is a function and anything without is a macro.

This fixes the Sphinx error:

/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/qom/object.h:155:Error in declarator
If declarator-id with parameters (e.g., 'void f(int arg)'):
  Invalid C declaration: Expected identifier in nested name. [error at 25]
    DECLARE_INSTANCE_CHECKER ( InstanceType,  OBJ_NAME,  TYPENAME)
    -------------------------^
If parenthesis in noptr-declarator (e.g., 'void (*f(int arg))(double)'):
  Error in declarator or parameters
  Invalid C declaration: Expecting "(" in parameters. [error at 39]
    DECLARE_INSTANCE_CHECKER ( InstanceType,  OBJ_NAME,  TYPENAME)
    ---------------------------------------^

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-2-peter.maydell@linaro.org
2020-11-02 16:52:18 +00:00
Peter Maydell
c20a135a7a hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work
In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt
into the GICv3CPUState struct's maintenance_irq field.  This will
only work if the board happens to have already wired up the CPU
maintenance IRQ before the GIC was realized.  Unfortunately this is
not the case for the 'virt' board, and so the value that gets copied
is NULL (since a qemu_irq is really a pointer to an IRQState struct
under the hood).  The effect is that the CPU interface code never
actually raises the maintenance interrupt line.

Instead, since the GICv3CPUState has a pointer to the CPUState, make
the dereference at the point where we want to raise the interrupt, to
avoid an implicit requirement on board code to wire things up in a
particular order.

Reported-by: Jose Martins <josemartins90@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201009153904.28529-1-peter.maydell@linaro.org
Reviewed-by: Luc Michel <luc@lmichel.fr>
2020-11-02 16:52:17 +00:00
Peter Maydell
76346b6264 configure: Test that gio libs from pkg-config work
On some hosts (eg Ubuntu Bionic) pkg-config returns a set of
libraries for gio-2.0 which don't actually work when compiling
statically. (Specifically, the returned library string includes
-lmount, but not -lblkid which -lmount depends upon, so linking
fails due to missing symbols.)

Check that the libraries work, and don't enable gio if they don't,
in the same way we do for gnutls.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200928160402.7961-1-peter.maydell@linaro.org
2020-11-02 16:52:17 +00:00
Peter Maydell
7142eb9e24 target/arm: Get correct MMU index for other-security-state
In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to
armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el().
This is incorrect when the security state being queried is not the
current one, because arm_current_el() uses the current security state
to determine which of the banked CONTROL.nPRIV bits to look at.
The effect was that if (for instance) Secure state was in privileged
mode but Non-Secure was not then we would return the wrong MMU index.

The only places where we are using this function in a way that could
trigger this bug are for the stack loads during a v8M function-return
and for the instruction fetch of a v8M SG insn.

Fix the bug by expanding out the M-profile version of the
arm_current_el() logic inline so it can use the passed in secstate
rather than env->v7m.secure.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201022164408.13214-1-peter.maydell@linaro.org
2020-11-02 16:52:17 +00:00
AlexChen
18520fa465 hw/display/exynos4210_fimd: Fix potential NULL pointer dereference
In exynos4210_fimd_update(), the pointer s is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to global_width after checking that the s is valid.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5F9F8D88.9030102@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:17 +00:00
AlexChen
0080edc45e hw/display/omap_lcdc: Fix potential NULL pointer dereference
In omap_lcd_interrupts(), the pointer omap_lcd is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to surface after checking that the omap_lcd is valid
and move surface_bits_per_pixel(surface) to after the surface assignment.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-id: 5F9CDB8A.9000001@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:17 +00:00
Rémi Denis-Courmont
3f0b59070c hw/arm/boot: fix SVE for EL3 direct kernel boot
When booting a CPU with EL3 using the -kernel flag, set up CPTR_EL3 so
that SVE will not trap to EL3.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030151541.11976-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:16 +00:00
Philippe Mathieu-Daudé
744a790ec0 hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):

  CID 1432363 (#1 of 1): Unintentional integer overflow:

  overflow_before_widen:
    Potentially overflowing expression 1 << scale with type int
    (32 bits, signed) is evaluated using 32-bit arithmetic, and
    then used in a context that expects an expression of type
    hwaddr (64 bits, unsigned).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201030144617.1535064-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:16 +00:00
Peter Maydell
437588d81d disas/capstone: Fix monitor disassembly of >32 bytes
If we're using the capstone disassembler, disassembly of a run of
instructions more than 32 bytes long disassembles the wrong data for
instructions beyond the 32 byte mark:

(qemu) xp /16x 0x100
0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000
0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000
0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574
0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000
(qemu) xp /16i 0x100
0x00000100: 00000005 andeq r0, r0, r5
0x00000104: 54410001 strbpl r0, [r1], #-1
0x00000108: 00000001 andeq r0, r0, r1
0x0000010c: 00001000 andeq r1, r0, r0
0x00000110: 00000000 andeq r0, r0, r0
0x00000114: 00000004 andeq r0, r0, r4
0x00000118: 54410002 strbpl r0, [r1], #-2
0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x00000120: 54410001 strbpl r0, [r1], #-1
0x00000124: 00000001 andeq r0, r0, r1
0x00000128: 00001000 andeq r1, r0, r0
0x0000012c: 00000000 andeq r0, r0, r0
0x00000130: 00000004 andeq r0, r0, r4
0x00000134: 54410002 strbpl r0, [r1], #-2
0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x0000013c: 00000000 andeq r0, r0, r0

Here the disassembly of 0x120..0x13f is using the data that is in
0x104..0x123.

This is caused by passing the wrong value to the read_memory_func().
The intention is that at this point in the loop the 'cap_buf' buffer
already contains 'csize' bytes of data for the instruction at guest
addr 'pc', and we want to read in an extra 'tsize' bytes.  Those
extra bytes are therefore at 'pc + csize', not 'pc'.  On the first
time through the loop 'csize' happens to be zero, so the initial read
of 32 bytes into cap_buf is correct and as long as the disassembly
never needs to read more data we return the correct information.

Use the correct guest address in the call to read_memory_func().

Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1900779
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201022132445.25039-1-peter.maydell@linaro.org
2020-11-02 16:52:16 +00:00
Rémi Denis-Courmont
9bd268bae5 target/arm: fix LORID_EL1 access check
Secure mode is not exempted from checking SCR_EL3.TLOR, and in the
future HCR_EL2.TLOR when S-EL2 is enabled.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:16 +00:00
Rémi Denis-Courmont
373e7ffde9 target/arm: fix handling of HCR.FB
HCR should be applied when NS is set, not when it is cleared.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:15 +00:00
Peter Maydell
d1a9254be5 target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts
The helper functions for performing the udot/sdot operations against
a scalar were not using an address-swizzling macro when converting
the index of the scalar element into a pointer into the vm array.
This had no effect on little-endian hosts but meant we generated
incorrect results on big-endian hosts.

For these insns, the index is indexing over group of 4 8-bit values,
so 32 bits per indexed entity, and H4() is therefore what we want.
(For Neon the only possible input indexes are 0 and 1.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-3-peter.maydell@linaro.org
2020-11-02 16:52:15 +00:00
Peter Maydell
552714c081 target/arm: Fix float16 pairwise Neon ops on big-endian hosts
In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error
meant we were using the H4() address swizzler macro rather than the
H2() which is required for 2-byte data.  This had no effect on
little-endian hosts but meant we put the result data into the
destination Dreg in the wrong order on big-endian hosts.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-2-peter.maydell@linaro.org
2020-11-02 16:52:15 +00:00
Richard Henderson
8aab18a2c5 target/arm: Improve do_prewiden_3d
We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:15 +00:00
Richard Henderson
9f1a5f93c2 target/arm: Simplify do_long_3d and do_2scalar_long
In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:15 +00:00
Richard Henderson
b38b96ca90 target/arm: Rename neon_load_reg64 to vfp_load_reg64
The only uses of this function are for loading VFP
double-precision values, and nothing to do with NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:14 +00:00
Richard Henderson
0aa8e700a5 target/arm: Add read/write_neon_element64
Replace all uses of neon_load/store_reg64 within translate-neon.c.inc.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:14 +00:00
Richard Henderson
21c1c0e50b target/arm: Rename neon_load_reg32 to vfp_load_reg32
The only uses of this function are for loading VFP
single-precision values, and nothing to do with NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:14 +00:00
Richard Henderson
4d5fa5a80a target/arm: Expand read/write_neon_element32 to all MemOp
We can then use this to improve VMOV (scalar to gp) and
VMOV (gp to scalar) so that we simply perform the memory
operation that we wanted, rather than inserting or
extracting from a 32-bit quantity.

These were the last uses of neon_load/store_reg, so remove them.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:14 +00:00
Richard Henderson
a712266f5d target/arm: Add read/write_neon_element32
Model these off the aa64 read/write_vec_element functions.
Use it within translate-neon.c.inc.  The new functions do
not allocate or free temps, so this rearranges the calling
code a bit.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:13 +00:00
Richard Henderson
d8719785fd target/arm: Use neon_element_offset in vfp_reg_offset
This seems a bit more readable than using offsetof CPU_DoubleU.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:13 +00:00
Richard Henderson
0f2cdc8227 target/arm: Use neon_element_offset in neon_load/store_reg
These are the only users of neon_reg_offset, so remove that.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:13 +00:00
Richard Henderson
7ec85c0283 target/arm: Move neon_element_offset to translate.c
This will shortly have users outside of translate-neon.c.inc.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:13 +00:00
Richard Henderson
015ee81a4c target/arm: Introduce neon_full_reg_offset
This function makes it clear that we're talking about the whole
register, and not the 32-bit piece at index 0.  This fixes a bug
when running on a big-endian host.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:12 +00:00
Peter Maydell
b139d11ae1 xen patch
- Rework Xen disk unplug to work with newer command line
   options.
 -----BEGIN PGP SIGNATURE-----
 
 iQFOBAABCgA4FiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAl+gGt0aHGFudGhvbnku
 cGVyYXJkQGNpdHJpeC5jb20ACgkQDPVXL9f7Va9mPQf+J9g428iiESN6qwiwL7G8
 c9fXeFoav5+ZckRxzXQHAxNexoB0szkx8Qfs7IOuR9095kfJp8H7mR6/NA2LW+GY
 n6AxGNcyPJdjx2yTVYJt/SYPfOk7f37Qi9cJIPvgPZQBehd9WLStCp7Kf6WzCMX4
 qSUFej6bAzC/m6msoTHVO0sMOqhrlMe9YXs4CgGbQez6Al28QtM5Bq4EsPohB2VL
 oyuPx3iYgu2O11yh/XRNH9lm4tJV8E80r6lolBaa5IUuNYeqw4Qtyu/lgune96bc
 OGhO9VcEscpAizoq1eo0uYP/xyu0yJdGWogVDWJjZktdnF/ii27t00tbireTCPEF
 lA==
 =YaAn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20201102' into staging

xen patch

- Rework Xen disk unplug to work with newer command line
  options.

# gpg: Signature made Mon 02 Nov 2020 14:42:37 GMT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg:                issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20201102:
  xen: rework pci_piix3_xen_ide_unplug

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:05:47 +00:00
Anthony PERARD
045b1d4dbb xen: rework pci_piix3_xen_ide_unplug
This is to allow IDE disks to be unplugged when adding to QEMU via:
    -drive file=/root/disk_file,if=none,id=ide-disk0,format=raw
    -device ide-hd,drive=ide-disk0,bus=ide.0,unit=0

as the current code only works for disk added with:
    -drive file=/root/disk_file,if=ide,index=0,media=disk,format=raw

Since the code already have the IDE controller as `dev`, we don't need
to use the legacy DriveInfo to find all the drive we want to unplug.
We can simply use `blk` from the controller, as it kind of was already
assume to be the same, by setting it to NULL.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20201027154058.495112-1-anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2020-11-02 11:56:55 +00:00
Peter Maydell
b149dea55c 9pfs: only test case changes this time
* Fix occasional test failures with parallel tests.
 
 * Fix coverity error in test code.
 
 * Avoid error when auto removing test directory if it disappeared
   for some reason.
 
 * Refactor: Rename functions to make top-level test functions fs_*()
   easily distinguishable from utility test functions do_*().
 
 * Refactor: Drop unnecessary function arguments in utility test
   functions.
 
 * More test cases using the 9pfs 'local' filesystem driver backend,
   namely for the following 9p requests: Tunlinkat, Tlcreate, Tsymlink
   and Tlink.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAl+f0fcXHHFlbXVfb3Nz
 QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5Uzyg//b4kBlOe/SmYq5JPLIvxlwB90
 8oOPrAZRP0JHSfIp/6NwbuFAIRqmLygKtSExWYn3anGwO95iSAPqAkO4PuiYDQtN
 lnzjkBz0VR9CClG4h19yzGrWUSnfAAtlqJ91rDuCyQlfYyxun1uHNaIVPg2en2eC
 ggoeDyL9sCBvDN7m+NuEmYcJjbgwSCvwFJ9yt7NC16EpB9hoy6+OUSLh7VwcCewn
 UVioRrorj6eZgcVVEGS9S01TQ1fXrMDr/xsezeLh5nv3QJ6o6fhPXL9VsF3Kv0UI
 rb/4iLPQB3vp99ARpQgB+5LlqzvjInFO5EEx6e3T9A3fD0mMy4dqnnZFg4EvEkNA
 +Yyg2ef1pt0vmTtKeMqRTfN0z3lu4OjxbgKgian4jmDICLHL92mZcNFArB9Lz8cE
 EZkDKOY1BqL2AbHRiWIzLQiM4qZxRT/yWZ5KULqC186GMgYbWik38bcEYzqDKd0M
 leKjNqSEBQmBAM2I1Kdw+bRBsqQssyCIzja39LM2tXkuH14GZpzgP/Z16v/WKuJO
 NzTzIavvg7lp93Ss0lQZSwJpAPFp3tKMMr8rmWUKhDsBu2LfhFiPQvg++WIsY9pX
 7N+ij8uhenTC3qLJBHcDOR5Cb2+fT4ibJZGmkrMag0rKxvvBPSVLTqg4D/tqe7yD
 dEqatKRBTUa2Y4CflG4=
 =Yrso
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201102' into staging

9pfs: only test case changes this time

* Fix occasional test failures with parallel tests.

* Fix coverity error in test code.

* Avoid error when auto removing test directory if it disappeared
  for some reason.

* Refactor: Rename functions to make top-level test functions fs_*()
  easily distinguishable from utility test functions do_*().

* Refactor: Drop unnecessary function arguments in utility test
  functions.

* More test cases using the 9pfs 'local' filesystem driver backend,
  namely for the following 9p requests: Tunlinkat, Tlcreate, Tsymlink
  and Tlink.

# gpg: Signature made Mon 02 Nov 2020 09:31:35 GMT
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20201102:
  tests/9pfs: add local Tunlinkat hard link test
  tests/9pfs: add local Tlink test
  tests/9pfs: add local Tunlinkat symlink test
  tests/9pfs: add local Tsymlink test
  tests/9pfs: add local Tunlinkat file test
  tests/9pfs: add local Tlcreate test
  tests/9pfs: add local Tunlinkat directory test
  tests/9pfs: simplify do_mkdir()
  tests/9pfs: Turn fs_mkdir() into a helper
  tests/9pfs: Turn fs_readdir_split() into a helper
  tests/9pfs: Factor out do_attach() helper
  tests/9pfs: Set alloc in fs_create_dir()
  tests/9pfs: Factor out do_version() helper
  tests/9pfs: Force removing of local 9pfs test directory
  tests/9pfs: fix coverity error in create_local_test_dir()
  tests/9pfs: fix test dir for parallel tests
  tests/9pfs: make create/remove test dir public

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 10:57:48 +00:00