Move CPU init to cpu_init.c and interrupt handling to int32_helper.c
for Sparc32 and int64_helper.c for Sparc64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No target-specific bits remaining, let's move it over.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is to get aligned with the linux name for this machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is FSF big endian core implemented through linux overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is Diamond 232L Standard Core Rev.B (LE), implemented through
linux/gdb overlay.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a type and methods for manipulating a list of disjoint I/O ports,
used in some older hardware devices.
Based on original patch by Richard Henderson.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
This is a DP264 variant, SMP capable, no unusual hardware present.
The emulation does not currently include any PCI IOMMU code.
Hopefully the generic support for that can be merged to HEAD soon.
Signed-off-by: Richard Henderson <rth@twiddle.net>
While working on the emulation of the freescale p2010 (e500v2) I realized that
there's no implementation of booke's timers features. Currently mpc8544 uses
ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for
example booke uses different SPR).
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We only support -M pseries when certain prerequisites are met, such
as a PPC64 guest and libfdt. To only gather these requirements in
a single place, this patch introduces a new CONFIG_PSERIES variable
that gets set when all prerequisites are met.
Signed-off-by: Alexander Graf <agraf@suse.de>
CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.
In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.
So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- change into MMIO scheme
- map the secondary NIP instead of 0 1:1
- only map 64MB for TLB, same as u-boot
- prepare code for 64-bit spinnings
v2 -> v3:
- remove r6
- set MAS2_M
- map EA 0
- use second TLB1 entry
v3 -> v4:
- change to memoryops
v4 -> v5:
- fix endianness bugs
v5 -> v6:
- add header
The MPIC has some funny feature where it maps different registers to an MMIO
region depending which CPU accesses them.
To be able to reflect that, we need to make OpenPIC be compiled in the target
code, so it can access cpu_single_env.
Signed-off-by: Alexander Graf <agraf@suse.de>
Use the new middle mode within the existing QMP server.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This will apply libuser-specific compilation flags (like the ones added by
--enable-user-pie), but keep softmmu emulation targets "as-is".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.
Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Sample board and sample CPU core are used for debug and may be used for
development of custom SoC emulators.
This board has two fixed size memory regions for DTCM and ITCM and
variable length SRAM region.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Compile g364fb in hwlib. Two compilations less for the full build.
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This has been discussed before in the past. The special casing really makes no
sense anymore. This seems like a good change to make for 1.0.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
[Stefan added missing 'test' in stap if statement]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Using '$^' to establish the files to link with will remove any repeated entries
in the list of dependencies.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
The first issue is the hard coded POSIX Real Time extensions library in the
libcacard/Makefile. From looking at the code it doesn't seem this is necessary
anyway. Robert Relyea seems to think it most likely isn't necessary.
The second issue was the missing exclusion of the BSD userland binary
builds from the addition of this Makefile target for the smartcard NSS
code which breaks the builds if smartcard NSS support is enabled.
pastebin clip of the build failure..
http://pastebin.com/raw.php?i=BLCKd3s6
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 8ef9ea85a2, reversing
changes made to 444dc48298.
From Avi:
Please revert the entire pull (git revert 8ef9ea85a2) while I work this
out - it isn't trivial.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Bare ETRAX FS board was a fictive machine that I used when
developing the CRIS system emulation. Since we support the
real AXIS-dev88 developer boards, there is no reason to
keep the fictive one around.
This commit also removes the double registration of the axis-dev88
board.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Added file tcg/optimize.c to hold TCG optimizations. Function tcg_optimize
is called from tcg_gen_code_common. It calls other functions performing
specific optimizations. Stub for constant folding was added.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Zipit Z2 is small PXA270 based handheld.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The memory API separates the attributes of a memory region (its size, how
reads or writes are handled, dirty logging, and coalescing) from where it
is mapped and whether it is enabled. This allows a device to configure
a memory region once, then hand it off to its parent bus to map it according
to the bus configuration.
Hierarchical registration also allows a device to compose a region out of
a number of sub-regions with different properties; for example some may be
RAM while others may be MMIO.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.
Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
target-arm: Minimal implementation of performance counters
Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Revert "target-arm: Use global env in neon_helper.c helpers"
target-arm: Pass fp status pointer explicitly to neon fp helpers
target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
target-arm: Add helper function to generate code to get fpstatus pointer
Revert "target-arm: Use global env in iwmmxt_helper.c helpers"
Conflicts:
Makefile.target
Xen won't be enabled if there is no backend support available for the
host. And that also means the map cache will work. So drop the separate
config switch and move the required stubs over to xen-stub.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: move TLBs to their own arrays
PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
PPC: E500: Use MAS registers instead of internal TLB representation
PPC: Only set lower 32bits with mtmsr
PPC: update openbios firmware
PPC: mpc8544ds: Add hypervisor node
PPC: calculate kernel,initrd,cmdline locations dynamically
target-ppc: Handle memory-forced I/O controller access
PPC: E500: Implement reboot controller
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.
Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.
Revert the hacks to avoid AREG0 use on Sparc hosts.
Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.
Compile the file without HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reverts commit 348883d482, so the
global env is no longer available to helper.c files other than
op_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests. The device is necessary for PV on HVM drivers to work.
Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When Linux reboots an e500 VM, it writes to a magic register in the
"global-utilities" device indicated by the device tree. We were not
emulating that device so far, rendering the VM reboot-less.
This patch implements that device with only the reboot functionality
implemented and adds it to the device tree. With this patch applied,
I can successfully reboot a -M mpc8544ds VM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
This module has no target dependencies (except for target_phys_addr_t
size) and can thus be built as part of libhw.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a dummy legacy ISA device whose responsibility is to
deploy sgabios, an option rom for a serial graphics adapter.
The proposal is that this device is always-on when -nographics,
but can otherwise be enable in any setup when -device sga is used.
[v2: suggestions on qdev by Markus ]
[v3: cleanups and documentation, per list suggestions ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 353ac78d49 moved the files
without fixing the include paths. It used a modified CFLAGS
to add hw to the include search path, but this breaks builds
where the user wants to set special CFLAGS. Long include paths
also increase compilation time.
Therefore this patch removes the special CFLAGS for virtio
and fixes the include statements by using relative include paths.
v2: Remove special CFLAGS.
v3: Update needed for latest QEMU.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.
There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The xenpv machine use the common init function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
xen_domainbuild and xen_machine_pv are built only for i386 targets.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Add very basic implementation of collie PDA emulation. The system lacks
LoCoMo and graphics/sound emulation. Linux kernel boots up to mounting
rootfs (theoretically it can be provided in pflash images).
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
- IRQs
- GPIO
- PPC
- RTC
- UARTs (no IrDA/etc.)
- OST reused from pxa25x
Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.
This only affects the ARM target as all the other targets currently only
have op_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).
Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's simple UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's System Controller core. The model
has the following features:
- support for shutting down and restarting the board
- provide two timers and GPIO
- provide registers for system identification and reading the boards
capabilities
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's memory card core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The ivshmem depends on PCI and KVM, not only KVM. Reflect this
in the Makefile, so we don't get build errors on s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Cam Macdonell <cam@cs.ualberta.ca>
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a model of the ARM Versatile Express board (with A9MPx4
daughterboard).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
This patch implements the infrastructure and hypercalls necessary for
the PAPR specified Virtual SCSI interface. This is the normal method
for providing (virtual) disks to PAPR partitions.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the PAPR specified Inter Virtual Machine Logical
LAN; that is the virtual hardware used by the Linux ibmveth driver.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR defines an interrupt control architecture which is logically divided
into ICS (Interrupt Control Presentation, each unit is responsible for
presenting interrupts to a particular "interrupt server", i.e. CPU) and
ICS (Interrupt Control Source, each unit responsible for one or more
hardware interrupts as numbered globally across the system). All PAPR
virtual IO devices expect to deliver interrupts via this mechanism. In
Linux, this interrupt controller system is handled by the "xics" driver.
On pSeries systems, access to the interrupt controller is virtualized via
hypercalls and RTAS methods. However, the virtualized interface is very
similar to the underlying interrupt controller hardware, and similar PICs
exist un-virtualized in some other systems.
This patch implements both the ICP and ICS sides of the PAPR interrupt
controller. For now, only the hypercall virtualized interface is provided,
however it would be relatively straightforward to graft an emulated
register interface onto the underlying interrupt logic if we want to add
a machine with a hardware ICS/ICP system in the future.
There are some limitations in this implementation: it is assumed for now
that only one instance of the ICS exists, although a full xics system can
have several, each responsible for a different group of hardware irqs.
ICP/ICS can handle both level-sensitve (LSI) and message signalled (MSI)
interrupt inputs. For now, this implementation supports only MSI
interrupts, since that is used by PAPR virtual IO devices.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This extends the "pseries" (PAPR) machine to include a virtual IO bus
supporting the PAPR defined hypercall based virtual IO mechanisms.
So far only one VIO device is provided, the vty / vterm, providing
a full console (polled only, for now).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a "pseries" machine to qemu. This aims to emulate a
logical partition on an IBM pSeries machine, compliant to the
"PowerPC Architecture Platform Requirements" (PAPR) document.
This initial version is quite limited, it implements a basic machine
and PAPR hypercall emulation. So far only one hypercall is present -
H_PUT_TERM_CHAR - so that a (write-only) console is available.
Multiple CPUs are permitted, with SMP entry handled kexec() style.
The machine so far more resembles an old POWER4 style "full system
partition" rather than a modern LPAR, in that the guest manages the
page tables directly, rather than via hypercalls.
The machine requires qemu to be configured with --enable-fdt. The
machine can (so far) only be booted with -kernel - i.e. no partition
firmware is provided.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
This patch adds support for the following two BSPs:
- LM32 EVR32 BSP (as used by RTEMS)
- uclinux BSP by Theobroma Systems
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for the LatticeMico32 UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the LatticeMico32 system timer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the LatticeMico32 softcore processor by Lattice
Semiconductor.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
If kvmclock is used, which implies the kernel supports it, register a
kvmclock device with the sysbus. Its main purpose is to save and restore
the kernel state on migration, but this will also allow to visualize it
one day.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This brings flatload.c more in line with the current Linux FLAT loader
which allows targets to handle various FLAT aspects in their own way.
For the common behavior, the new functions get stubbed out.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).
Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The e1000 has compatibility code to handle big endianness which makes it
mandatory to be recompiled on different targets.
With the generic mmio endianness solution, there's no need for that anymore.
We just declare all mmio to be little endian and call it a day.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make virtio devices optional. Selecting individual devices is not useful
as the host bindings are all in one file.
Signed-off-by: Paul Brook <paul@codesourcery.com>
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
It is now possible todo
probe qemu.system.i386.qemu_malloc {
printf("Malloc %d %p\n", size, ptr);
}
There is one tapset defined per target arch, for both
user and system emulators.
* Makefile.target: Generate stp files for each target
* tracetool: Support for generating systemtap tapsets
* configure: Check for whether systemtap is available
with the DTrace backend
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a makefile error that meant that qemu would not compile if
the source and object directories were the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
It is now possible todo
probe qemu.system.i386.qemu_malloc {
printf("Malloc %d %p\n", size, ptr);
}
There is one tapset defined per target arch.
* Makefile: Generate a qemu.stp file for systemtap
* tracetool: Support for generating systemtap tapsets
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This consolidates the duplicated oom_check() functions, as well as
splitting them into OS dependant versions to avoid the #ifdef
grossness that was present in the old osdep.c version.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Math functions are integrated into Haiku's libroot.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.
Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.
From now on, QMP and HMP have different command dispatch
tables.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We must be able to use a non-native strip executable, but not all
versions of 'install' support the --strip-program option (e.g.
OpenBSD). Accordingly, we can't use 'install -s', and we must run strip
separately.
Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
Cc: blauwirbel@gmail.com
resend for bug fix related to removal of irqfd
Support an inter-vm shared memory device that maps a shared-memory object as a
PCI device in the guest. This patch also supports interrupts between guest by
communicating over a unix domain socket. This patch applies to the qemu-kvm
repository.
-device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
Interrupts are supported between multiple VMs by using a shared memory server
by using a chardev socket.
-device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
[,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
-chardev socket,path=<path>,id=<id>
The shared memory server, sample programs and init scripts are in a git repo here:
www.gitorious.org/nahanni
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a new encoding: VNC_ENCODING_TIGHT_PNG [1] (-269) with a new
tight filter VNC_TIGHT_PNG (0x0A). When the client tells it supports the Tight PNG
encoding, the server will use tight, but will always send encoding pixels using
PNG instead of zlib. If the client also told it support JPEG, then the server can
send JPEG, because PNG will only be used in the cases zlib was used in normal tight.
This encoding was introduced to speed up HTML5 based VNC clients like noVNC [2], but
can also be used on devices like iPhone where PNG can be rendered in hardware.
[1] http://wiki.qemu.org/VNC_Tight_PNG
[2] http://github.com/kanaka/noVNC/
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add gradient filter and JPEG compression with an heuristic to detect how
lossy the comppression will be. This code has been adapted from
libvncserver/tight.c.
JPEG support can be enabled/disabled at compile time with --enable-vnc-jpeg
and --disable-vnc-jpeg.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Intel Macs have a chip called the "AppleSMC" which they use to control
certain Apple specific parts of the hardware, like the keyboard background
light.
That chip is also used to store a key that Mac OS X uses to decrypt binaries.
This patch adds emulation for that chip, so we're getting one step further
to having Mac OS X run natively on Qemu.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since we're no longer setting PAGE_RESERVED, there's no need to
implement qemu_malloc via mmap.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Finally, we can safely split out the piix specific part from pc.c
into pc_piix.c.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split acpi.c into the common part and the piix4 specific part.
The common part will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out apm register emulation for acpi.c into apm.c.
The apm emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split out piix4 smbus routines from acpi.c into pm_smbus.c and
use it.
The split out smbus emulation will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The configure test of vhost uses KVM CFLAGS, so the build must use them
as well. Otherwise we specifically miss what --kerneldir provides.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch doesn't implement the 9p protocol handling
code. It adds a simple device which dump the protocol data.
[jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion]
[aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on. Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed. This is inherently broken
and is more trouble than it's worth fixing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules. The patch also improves a bit the error
messages for KVM initialization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit b305b9d7d6 made building of virtio-pci
conditional and not enabled on S390x, because it collides with the S390 bus.
Commit 087431d1d1 accidentially reverted that
behavior, breaking S390x again.
So here's a follow-up patch disabling building of virtio-pci on S390x again.
This unbreaks the S390x target.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds vhost net device support in qemu. Will be tied to tap device
and virtio by following patches. Raw backend is currently missing,
will be worked on/submitted separately.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
event notifiers are slightly generalized eventfd descriptors. Current
implementation depends on eventfd because vhost is the only user, and
vhost depends on eventfd anyway, but a stub is provided for non-eventfd
case.
We'll be able to further generalize this when another user comes along
and we see how to best do this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make vl.o compiled per target and fix a thinko in hw/acpi.c. It's not trivial
to make kvm.h consumable by compiled-once files.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Arrange various declarations so that also non-CPU code can access
them, adjust users.
Move CPU specific code to cpus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.
Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).
Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.
This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.
The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
about half of target-i386/helper.c consist of CPUID related functions.
Only one of them is a real TCG helper function. So move the whole
CPUID stuff out of this into a separate file to get better
maintainable parts.
This is only code reordering and should not affect QEMU's
functionality.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some users prefer a single callback with length passed as parameter to
using b/w/l callbacks. It would maybe be cleaner to just pass length to
existing callbacks but that's a lot of churn. So for now add a wrapper.
For convenience use pcibus_t for address so a single callback can be
used for pci io and pci memory.
I did have to resort to preprocessor to reduce code duplication. It is
however slightly more straightforward, and better contained than what we
had with pci_host_template.h. Again, it would go away if we just passed
len to existing callbacks.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU. Tested with x86, x86-64 and arm
emulation.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Loïc Minier <lool@dooz.org>
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a few more vpath suffixes and points the remaining two paths
explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment
from config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move multiboot loading code into separate files as suggested by Alex Graf.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add generic support for debugging consoles (simple I/O ports which
when written to cause debugging output to be written to a target.)
The current implementation matches Bochs' port 0xe9, allowing the same
debugging code to be used for both Bochs and Qemu.
There is no vm state associated with the debugging port, simply
because it has none -- the entire interface is a single, stateless,
write-only port.
Most of the code was cribbed from the serial port driver.
v2: removed non-ISA variants (they can be introduced when/if someone
wants them, using code from the serial port); added configurable
readback (Bochs returns 0xe9 on a read from this register, mimic that
by default) This retains the apparently somewhat controversial user
friendly option, however.
v3: reimplemented the user friendly option as a synthetic option
("-debugcon foo" basically ends up being a parser-level shorthand for
"-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") --
this dramatically reduced the complexity while keeping the same level
of user friendliness.
v4: spaces, not tabs.
v5: update to match current top of tree. Calling qemu_chr_open()
already during parsing no longer works; defer until we are parsing the
other console-like devices.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".
Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:
Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.
Replace HWLIB by HWDIR, specifying only the directory.
Drop --whole-archive and ARLIBS in Makefiles and configure.
Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.
v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
by "user_only: compile everything with -fpie" (Kirill A. Shutemov)
v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.
Let's add that machine description and be happy!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.
So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.
This patch implements the bus that is the groundwork for such an S390x
virtio machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit a992fe3d0f
config-devices.h is no longer used.
So there is no need to keep the dependency rules
any longer.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code. If a config already exists but is older than the
default then print a warning.
Also remove config-devices.h. Code does not and should not care which
devices are being built.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Based on a ideas of Daniel Jacobowitz + Stefan Weil
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds common routines for pcie host bridge and pcie mmcfg.
This will be used by q35 based chipset emulation.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.
pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.
Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of putting more and more stuff into vl.c, let's have the generic
functions that deal with asynchronous callbacks in their own file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.
Patchworks-ID: 35301
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
First user of new config-devices.mak
Patchworks-ID: 35198
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Generate config-devices.h for each target and config-all-devices.h for
common library. We don't want to name both config-devices.h to avoid
path problems
Patchworks-ID: 35195
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.
Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add config.h file that includes config-target.h and config-host.h
Patchworks-ID: 35193
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include it directly in Makefile.target
Patchworks-ID: 35189
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix breakage in the following conditions:
- use in-tree building
- build user targets after system targets
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit fe6549dfd7.
tcg-runtime and host-utils are needed on 32 bit host and they are not part
of libqemu.a.
Thanks to Stefan Weil for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes compilation of linux-user with today qemu, please apply.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
