Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lack of MSI-X support is not an issue for interpreted passthrough
devices, so let's let these in. This will allow, for example, ISM
devices to be passed through -- but only when interpretation is
available and being used.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to fully support MSA_EXT_5, we have to support the SHA-512
special instructions. So implement those.
The implementation began as something TweetNacl-like, and then was
adjusted to be useful here. It's not very beautiful, but it is quite
short and compact, which is what we're going for.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ restructure, add missing exception, add comments, fixup CPU model ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220922153820.221811-1-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
=qT+H
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-09-20:
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
hw/ppc/spapr: Fix code style problems reported by checkpatch
hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
target/ppc: Clear fpstatus flags on helpers missing it
target/ppc: Zero second doubleword of VSR registers for FPR insns
target/ppc: Set OV32 when OV is set
target/ppc: Zero second doubleword for VSX madd instructions
target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
target/ppc: Zero second doubleword in DFP instructions
target/ppc: Remove unused xer_* macros
target/ppc: Remove extra space from s128 field in ppc_vsr_t
target/ppc: Merge fsqrt and fsqrts helpers
target/ppc: Move fsqrts to decodetree
target/ppc: Move fsqrt to decodetree
target/ppc: Implement hashstp and hashchkp
target/ppc: Implement hashst and hashchk
target/ppc: Add HASHKEYR and HASHPKEYR SPRs
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pnv_phb3_root_bus_info and pnv_phb4_root_bus_info are missing the
instance_size initialization. This results in accessing out-of-bound
memory when setting 'chip-id' and 'phb-id', and eventually crashes
glib's malloc functionality with the following message:
"qemu-system-ppc64: GLib: ../glib-2.72.3/glib/gmem.c:131: failed to allocate 3232 bytes"
This issue was noticed only when running qtests with QEMU Windows
32-bit executable. Windows 64-bit, Linux 32/64-bit do not expose
this bug though.
Fixes: 9ae1329ee2 ("ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge")
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220920103159.1865256-29-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.
Fixes: c5f54f3e31 ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132f ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Cleanup the previous pci information in acpi dsdt table.
And using the common acpi_dsdt_add_gpex function to build
the gpex and pci information.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-10-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add hotplug/unplug interface for memory device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-9-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In dsdt, acpi ged irq should use gsi number, and the
VIRT_SCI_IRQ means it.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-8-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add RAMFB device to dynamic_sysbus_devices list so that it can be
hotpluged to the machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-7-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add hotplug handler for LoongArch virt machine and now only support
the dynamic sysbus device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-6-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add platform bus support and add the bus information such as address,
size, irq number to FDT table.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add interrupt information to FDT table, such as interrupt
controller info, compatiable info, etc.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-4-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Support fw_cfg dma function for LoongArch virt machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove the vga device when loongarch machine init and
we will support other display device in the future.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
test_bit uses header->type as an offset; if the file incorrectly specifies a
type greater than 127, smbios_entry_add will read and write garbage.
To fix this, just pass the smbios data through, assuming the user knows what
to do. Reported by Coverity as CID 1487255.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Overwriting "path" in the second call to g_strdup_printf() causes a memory leak,
even if the variable itself is g_autofree.
Reported by Coverity as CID 1460454.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)
Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Arm system emulation targets always have TARGET_BIG_ENDIAN clear, so
there is no need to have handling in armv7m_load_kernel() for the
case when it is defined. Remove the unnecessary code.
Side notes:
* our M-profile implementation is always little-endian (that is, it
makes the IMPDEF choice that the read-only AIRCR.ENDIANNESS is 0)
* if we did want to handle big-endian ELF files here we should do it
the way that hw/arm/boot.c:arm_load_elf() does, by looking at the
ELF header to see what endianness the file itself is
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In more recent Raspbian OS Linux kernels, the fb driver gives up
immediately if RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS fails or no
displays are reported.
This change simply always reports one display. It makes bcm2835_fb work
again with these more recent kernels.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Message-Id: <20220812143519.59134-1-Enrik.Berkhan@inka.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When running under Xen and the guest reboots, it boots into a new domain
with a new QEMU process (and a new swtpm process if using the emulator
backend). The existing reset function is triggered just before the old
QEMU process exists which causes QEMU to startup the TPM backend and
then immediately shut it down. This is probably harmless but when using
the emulated backend, it wastes CPU and IO time reloading state, etc.
Fix this by calling the reset function directly from realize() when
running under Xen. During a reboot, this will be called by the QEMU
process for the new domain.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220826143841.1515326-1-ross.lagerwall@citrix.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"platform" is not a valid name for a bus node in dt-schema, so warnings
can be see in dt-validate on a dump of the riscv virt dtb:
/stuff/qemu/qemu.dtb: platform@4000000: $nodename:0: 'platform@4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
"platform-bus" is a valid name, so use that instead.
CC: Rob Herring <robh@kernel.org>
Fixes: 11d306b9df ("hw/arm/sysbus-fdt: helpers for platform bus nodes addition")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-5-mail@conchuod.ie
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The last_clk time was initialized at zero, this means when we calculate
the first delta we will calculate 0 vs current time which could cause
unnecessary hops.
This patch moves timer initialization to the cpu reset. There are two
resets registered here:
1. Per cpu timer mask (ttmr) reset.
2. Global cpu timer (last_clk and ttcr) reset, attached to the first
cpu only.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This is mostly borrowed from xtensa and riscv as examples. The
create_pcie_irq_map swizzle function is almost and exact copy
but here we use a single cell interrupt, possibly we can make
this generic.
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This
platform allows for a convenient CI platform for toolchain, software
ports and the OpenRISC linux kernel port.
Much of this has been sourced from the m68k and riscv virt platforms.
The platform provides:
- OpenRISC SMP with up to 4 cpus
- A virtio bus with up to 8 devices
- Standard ns16550a serial
- Goldfish RTC
- SiFive TEST device for poweroff and reboot
- Generated Device Tree to automatically configure the guest kernel
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add a new property "big-endian" to allow configuring the RTC as either
little or big endian, the default is little endian.
Currently overriding the default to big endian is only used by the m68k
virt platform. New platforms should prefer to use little endian and not
set this.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These will be shared with the virt platform.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The DMA engine is started by I/O access and then itself accesses the
I/O registers, triggering a reentrancy bug.
The following log can reveal it:
==5637==ERROR: AddressSanitizer: stack-overflow
#0 0x5595435f6078 in tulip_xmit_list_update qemu/hw/net/tulip.c:673
#1 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
#2 0x559544637f86 in memory_region_write_accessor qemu/softmmu/memory.c:492:5
#3 0x5595446379fa in access_with_adjusted_size qemu/softmmu/memory.c:554:18
#4 0x5595446372fa in memory_region_dispatch_write qemu/softmmu/memory.c
#5 0x55954468b74c in flatview_write_continue qemu/softmmu/physmem.c:2825:23
#6 0x559544683662 in flatview_write qemu/softmmu/physmem.c:2867:12
#7 0x5595446833f3 in address_space_write qemu/softmmu/physmem.c:2963:18
#8 0x5595435fb082 in dma_memory_rw_relaxed qemu/include/sysemu/dma.h:87:12
#9 0x5595435fb082 in dma_memory_rw qemu/include/sysemu/dma.h:130:12
#10 0x5595435fb082 in dma_memory_write qemu/include/sysemu/dma.h:171:12
#11 0x5595435fb082 in stl_le_dma qemu/include/sysemu/dma.h:272:1
#12 0x5595435fb082 in stl_le_pci_dma qemu/include/hw/pci/pci.h:910:1
#13 0x5595435fb082 in tulip_desc_write qemu/hw/net/tulip.c:101:9
#14 0x5595435f7e3d in tulip_xmit_list_update qemu/hw/net/tulip.c:706:9
#15 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
Fix this bug by restricting the DMA engine to memories regions.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It allows per-net client operations right after device's successful
start. In particular, to load the device status.
Vhost-vdpa net will use it to add the CVQ buffers to restore the device
status.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Used by the backend to perform actions after the device is stopped.
In particular, vdpa net use it to unmap CVQ buffers to the device,
cleaning the actions performed in prepare().
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
