As pci id initialization is moved to common layer,
some initialization function can be empty.
So don't call init method if NULL.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vender id/device id... in configuration space are read-only registers
which are commonly defined for all pci devices.
So move those initialization into common place.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prevent a deadlock caused by leaving a map cache bucket locked by the
preceding qemu_get_ram_ptr() call.
Signed-off-By: John Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is similar to pci_register_bar(), but automatically registers a single
memory region spanning the entire BAR.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce accessor function to know INTx levels.
It will be used later by q35.
Although piix_pci tracks the intx line levels, it can be eliminated
by this helper function.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(slot, fn) pair is somewhat confusing because of ARI.
So use devfn for pci_find_device() instead of (slot, fn).
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes typo in pcibus_get_dev_path().
Without this patch, the result of pcibus_get_dev_path() isn't unique.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_BRIDGE_CTL_DISCARD_STATUS (bit 10 in bridge control register)
is W1C so we should not make it writeable, otherwise the assert(!(wmask
& w1cmask)) in pci_default_write_config() is hit
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Isaku Yamahata <yamahata@valinux.co.jp>
Tested-by: Isaku Yamahata <yamahata@valinux.co.jp>
PCIDevice::rom_file is leaked.
PCIDevice::rom_file is allocated in pci_qdev_init(), but not freed anywhere.
free it in qemu_unregister_device().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use qemu_malloc() instead of direct use of malloc().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patch a6a7005d14 generated
broken device paths. We snprintf with a length shorter
than the output, so the last character is discarded and replaced
by the null byte. Fix it up by snprintf to a buffer
which is larger by 1 byte and then memcpy the data (without
the null byte) to where we need it.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a field to PCIDeviceInfo to tag devices as being
not hotpluggable. Any attempt to plug-in or -out such a device
will throw an error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device path used for migration is currently broken for
for all devices behind a nested bridge.
Replace this by a hierarchical list of slot/function numbers, walking
the path from root down to device. Add :00 after the domain number
so that if there are no nested bridges, this is compatible
with what we have now.
Note: as pointed out by Gleb, using openfirmware paths
might be cleaner, doing this would break compatibility though,
and the IDs used are not guest or user visible at all,
so breaking the compatibility is probably not worth it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduce a helper function to get PCIDevice from qdev id.
This function will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support flr: trigger device reset on flr config write.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using bus numbers in migration is clearly wrong as
they are guest assigned. Not really sure what the
right thing to do is, for now stick 0 in there so things
keep working for non-nested setups, add a TODO.
We also probably have to mark nested bridges as non-migrateable
until this is fixed?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
msi depends on pci but pci should not depend on msi.
The only dependency we have is a recent addition
of pci_msi_ functions, IMO they add little enough to
open-code in the small number of users.
Follow-up patches add more cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
pcie aer needs SERR bit to be writable, and the PCI spec requires
this as well. For compatibility, introduce compat global property
command_serr_enable and make this bit readonly for a pre 0.14 pc
machine.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Take into account secondary bus reset bit for
bus walk: devices behind a reset bus should not
respond to configuration cycles.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices with different vendor or device ids sometimes share
the same rom code. Only the ids and the checksum
differs in a boot rom for such devices.
The i825xx ethernet controller family is a typical example
which is implemented in hw/eepro100.c. It uses at least
3 different device ids, so normally 3 boot roms would be needed.
By automatically patching vendor id and device id (and the checksum)
in qemu, all emulated family members can share the same boot rom.
VGA bios roms are another example with different vendor and device ids.
Only qemu's built-in default rom files will be patched.
v2:
* Patch also the vendor id (and remove the sanity check for vendor id).
v3:
* Don't patch a rom file when its name was set by the user.
Thus we avoid modifications of unknown rom data.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bits 12 to 15 in bridge control register are reserver and must be
read-only zero, curent mask is 0xffff which makes them writeable. Fix
this up by using symbolic bit names for writeable bits instead of a
hardcoded constant.
Fix a comment w1mask -> w1cmask as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds W1C bit support in the initialization/reset of pci
status registers.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad503 .
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cam Macdonell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device. This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.
Note: pcibus_get_dev_path() copied this code,
inheriting the same bug. pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration. However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.
This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- save/restore must not check w1c bits
since they are in fact guest controlled
- clear w1c bits on reset
Note: for express there are different kinds of
reset, some leave part of config space alone.
We will likely need a sticky bit mask to implement this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use pci_clear_bit_word() in pci_device_reset() where appropriate.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this patch implements helper functions to handle msi-x and msi
uniformly.
They will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clear w1cmask when deleting a pci capability.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement RW1C register framework.
With this patch, it would be easy to implement
W1C(Write 1 to Clear) register by just setting w1cmask.
Later RW1C register will be used by pcie.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Abort when invalid value for region_num is passed to pci_register_bar.
That is caller's bug. Abort instead of silently ignoring invalid value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch sorts out invalid use of pcibus_t.
In pci_register_bar(), pcibus_t wmask is used. It should,
however, be uint64_t because it is used to set
pci configuration space value(PCIDevice::wmask)
by pci_set_quad() or pci_set_long().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
make pci_parse_devfn() aware of func. With func = NULL it behave as before.
This will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
call hotplug callback even when not hotplug case for later use.
And move hotplug check into hotplug callback.
PCIE slot needs this for card presence detection.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
