The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Do this so other pieces of code can make decisions based on the
capabilities of the CPU we're emulating.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.
So x86_64 can run i386 code easily and ppc64 can run ppc code.
Unfortunately, the current checks are pretty strict. So you can only
load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.
This can get really annoying. I first encountered this issue with
my multiboot patch, where qemu-system-x86_64 was unable to load an
i386 elf binary because the elf loader rejected it.
The same thing happened again on PPC64 now. The firmware we're loading
is a PPC32 elf binary, as it's shared with PPC32. But the platform is
PPC64.
Right now there is a hack for this in the ppc cpu.h definition, that
simply sets the type to PPC32 in system emulation mode. While that
works fine for the firmware, it's no good if you also want to load a
PPC64 kernel with -kernel.
So in order to solve this mess, I figured the easiest way is to make
the elf loader aware of platforms that are backwards compatible. For
now I was only sure that x86_64 does i386 and ppc64 does ppc32, but
maybe there are other combinations too.
This patch is a prerequisite for having a working -kernel option on
PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6855 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970 CPUs have the SLB not memory backed, but inside the CPU.
This breaks bridge mode for 970 for now, but at least keeps us from
overwriting physical addresses 0x0 - 0x300, rendering our interrupt
handlers useless.
I put in a stub for bridge mode operation that could be enabled
easily, but for now it's safer to leave that off I guess (970fx doesn't
have bridge mode AFAIK).
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6757 c046a42c-6fe2-441c-8c8c-71466251a162
The current SLB/PTE code does not support large pages, which are
required by Linux, as it boots up with the kernel regions up as large.
This patch implements large page support, so we can run Linux.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6748 c046a42c-6fe2-441c-8c8c-71466251a162
In order to modify SLB entries on recent PPC64 machines, the slbmte
instruction is used.
This patch implements the slbmte instruction and makes the "bridge"
mode code use the slb set functions, so we can move the SLB into
the CPU struct later.
This is required for Linux to run on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6747 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
Only one of Altivec and SPE will be available on a given chip.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6506 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
ACC is a 64-bit register and needs to be specified as such regardless of
the target.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6090 c046a42c-6fe2-441c-8c8c-71466251a162
All archs use the same cpu_loop_exit, so move the prototype in a common
header. i386 was carrying a __hidden attribute, but that was empty for
this arch anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5820 c046a42c-6fe2-441c-8c8c-71466251a162
This patch refactors the way the CPU state is handled that is associated
with a TB. The basic motivation is to move more arch specific code out
of generic files. Specifically the long #ifdef clutter in tb_find_fast()
has to be overcome in order to avoid duplicating it for the gdb
watchpoint fixes (patch "Restore pc on watchpoint hits").
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5736 c046a42c-6fe2-441c-8c8c-71466251a162
as macros should be avoided when possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5735 c046a42c-6fe2-441c-8c8c-71466251a162
It looks like the i386 runs out of registers for allocation due
to too many global registers allocated by the ppc target.
Here is a quick and dirty fix that seems to solve the problem.
This should be considered as temporary.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5648 c046a42c-6fe2-441c-8c8c-71466251a162
Revision 5500 of the qemu repository removed all code using
ppc_load_xer & ppc_store_xer as well as their implementation.
Another patch fixes it's usage in kvm-userspace for powerpc, but I think
that header can now be cleaned up, therefore this patch to qemu-devel.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5589 c046a42c-6fe2-441c-8c8c-71466251a162
Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
- use target_ulong for gpr and dyngen registers
- remove ppc_gpr_t type
- define 64-bit dyngen registers for GPE register on 32-bit targets
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5154 c046a42c-6fe2-441c-8c8c-71466251a162
Replace op_load_gpr_{T0,T1,T2} and op_store_{T0,T1,T2} with tcg_gen_mov_tl.
Introduce TCG variables cpu_gpr[0..31].
For the SPE extension, assure that ppc_gpr_t is only uint64_t for ppc64.
Introduce TCG variables cpu_gprh[0..31] for upper 32 bits on ppc and helpers
gen_{load,store}_gpr64. Based on suggestions by Aurelien, Thiemo and Blue.
Signed-off-by: Andreas Faerber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5153 c046a42c-6fe2-441c-8c8c-71466251a162
Save and restore env->interrupt_request and env->halted.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4817 c046a42c-6fe2-441c-8c8c-71466251a162
tend more to propagate bugged definition than simplify the code.
Check and fix PowerPC 6xx implementations definitions.
Misc fixes in PowerPC CPU list.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3707 c046a42c-6fe2-441c-8c8c-71466251a162
Use it to properly initialize the clock for the PreP target.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3701 c046a42c-6fe2-441c-8c8c-71466251a162
ie MPC5xx, MPC8xx, e200, e300, e500 and e600 cores.
Make those CPUs and PowerPC 440 available for user-mode emulation,
thus providing a way of testing their implementation specific instructions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3681 c046a42c-6fe2-441c-8c8c-71466251a162
Remove TARGET_PPC64 dependency and add code provision to be able
to define a fake 32 bits CPU with hypervisor feature support.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3678 c046a42c-6fe2-441c-8c8c-71466251a162
Use proper INPUT_NB definitions to allocate PowerPC input pins structure,
fixing a buffer overflow in the 6xx bus case.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3659 c046a42c-6fe2-441c-8c8c-71466251a162
Always make the hypervisor timers available.
Remove all TARGET_PPC64H checks, keeping a few if (0) tests for cases
that cannot be properly handled with the current PowerPC CPU definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3656 c046a42c-6fe2-441c-8c8c-71466251a162
available for full system emulation, then removing all #if TARGET_PPC64H
from micro-ops and code translator.
Add new macros to dramatically simplify memory access tables definitions
in target-ppc/translate.c.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3654 c046a42c-6fe2-441c-8c8c-71466251a162
now that the SPE extension is available for all targets,
we always need to have some 64 bits temporary registers.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3647 c046a42c-6fe2-441c-8c8c-71466251a162
adding gprh registers to store GPR MSBs when GPRs are 32 bits.
Remove not-needed-anymore ppcemb-linux-user target.
Keep ppcemb-softmmu target, which provides 1kB pages support
and 36 bits physical address space.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3628 c046a42c-6fe2-441c-8c8c-71466251a162
Implement PowerPC 601 HID0 register, needed for little-endian mode support.
As a consequence, we need to merge hflags coming from MSR with other ones.
Use little-endian mode from hflags instead of MSR during code translation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3524 c046a42c-6fe2-441c-8c8c-71466251a162
* PowerPC 601 (and probably POWER/POWER2) uses a different BAT format than
later PowerPC implementation.
* Bugfix in BATs check: must not stop after 4 BATs when more are provided.
* Enable POWER 'rac' instruction.
* Fix exception prefix for all supported PowerPC implementations.
* Fix exceptions, MMU model and bus model for PowerPC 601 & 620.
* Enable PowerPC 620 as it could mostly boot a PreP target.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3518 c046a42c-6fe2-441c-8c8c-71466251a162
routines. Coming back to a raw MSR storage model then speed-up the emulation.
Improve fast MSR updates (wrtee wrteei and mtriee cases).
Share rfi family instructions helpers code to avoid bug in duplicated code.
Allow entering halt mode as the result of a rfi instruction.
Add a new helper_regs.h file to avoid duplication of special registers
manipulation routines (currently XER and MSR).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3436 c046a42c-6fe2-441c-8c8c-71466251a162
allowing support of more than 2 mmu access modes.
Add backward compatibility is_user variable in targets code when needed.
Implement per target cpu_mmu_index function, avoiding duplicated code
and #ifdef TARGET_xxx in softmmu core functions.
Implement per target mmu modes definitions. As an example, add PowerPC
hypervisor mode definition and Alpha executive and kernel modes definitions.
Optimize PowerPC case, precomputing mmu_idx when MSR register changes
and using the same definition in code translation code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
Add #ifdef to avoid compiling not relevant resources:
- MMU related stuff for user-mode only targets
- PowerPC 64 only resources for PowerPC 32 targets
- embedded PowerPC extensions for non-ppcemb targets.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3343 c046a42c-6fe2-441c-8c8c-71466251a162
As a side effect, single step and branch step are available again.
Remove irrelevant MSR bits definitions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3342 c046a42c-6fe2-441c-8c8c-71466251a162
memory segments.
Remove the PowerPC 64 "bridge" MMU model and implement segment registers
emulation using SLB entries instead.
Make SLB area size implementation dependant.
Improve TLB & SLB search debug traces.
Temporary hack to make PowerPC 970 boot from ROM instead of RAM.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3335 c046a42c-6fe2-441c-8c8c-71466251a162
Protect PowerPC 64 only features with #ifdef (TARGET_PPC64)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3316 c046a42c-6fe2-441c-8c8c-71466251a162
call the helpers directly from the micro-ops.
Avoid duplicated code for tlbsx. implementation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3302 c046a42c-6fe2-441c-8c8c-71466251a162
- New mtmsr/mtmsrd form that just update RI and EE bits
- New hrfid, lq and stq instructions
- Add support for supervisor and hypervisor modes process priority update
- Code provision for hypervisor SPR accesses
* Actually implement the wait instruction
* Bugfixes (missing RETURN in micro-op / missing #ifdef)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3289 c046a42c-6fe2-441c-8c8c-71466251a162
Share most code with the time-base management routines.
Remove time-base write routines from user-mode emulation environments.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3277 c046a42c-6fe2-441c-8c8c-71466251a162
* don't use exception vectors as the exception number.
Use vectors numbers as defined in the PowerPC embedded specification instead
and extend this model to cover all emulated PowerPC variants exceptions.
* add some missing exceptions definitions, from PowerPC 2.04 specification
and actual PowerPC implementations.
* add code provision for hypervisor exceptions handling.
* define exception vectors and prefix in CPUPPCState to emulate BookE exception
vectors without any hacks.
* define per CPU model valid exception vectors.
* handle all known exceptions in user-mode only emulations.
* fix hardware interrupts priorities in most cases.
* change RET_EXCP macros name into GEN_EXCP as they don't return.
* do not stop translation on most instructions that are not defined as
context-synchronizing in PowerPC specification.
* fix PowerPC 64 jump targets and link register update when in 32 bits mode.
* Fix PowerPC 464 and 464F definitions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3261 c046a42c-6fe2-441c-8c8c-71466251a162
* cleanup cpu.h, removing definitions used only in translate.c/translate_init.c
* add new flags to define instructions sets more precisely
* various changes in MMU models definitions
* add definitions for PowerPC 440/460 support (insns and SPRs).
* add definitions for PowerPC 401/403 and 620 input pins model
* Fix definitions for most PowerPC 401, 403, 405, 440, 601, 602, 603 and 7x0
* Preliminary support for PowerPC 74xx (aka G4) without altivec.
* Code provision for other PowerPC support (7x5, 970, ...).
* New SPR and PVR defined, from PowerPC 2.04 specification and other sources
* Misc code bugs, error messages and styles fixes.
* Update status files for PowerPC cores support.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3244 c046a42c-6fe2-441c-8c8c-71466251a162
Check that at least instructions set and SPRs are correct for
PowerPC 401, 403, 405 and 440 cores.
Implement PowerPC 401 MMU model (real-mode only).
Improve INSNs and SPRs dump to ease parse with standard shell tools.
Add more precise status for most PowerPC cores families.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3201 c046a42c-6fe2-441c-8c8c-71466251a162
As a side effect, avoid potential bits shadowing in TB flags on 64 bits BookE.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3199 c046a42c-6fe2-441c-8c8c-71466251a162
