For KVM to use Transparent Huge Pages (THP) we have to ensure that the
alignment of the userspace address of the KVM memory slot and the IPA
that the guest sees for a memory region have the same offset from the 2M
huge page size boundary.
One way to achieve this is to always align the IPA region at a 2M
boundary and ensure that the mmap alignment is also at 2M.
Unfortunately, we were only doing this for __arm__, not for __aarch64__,
so add this simple condition.
This fixes a performance regression using KVM/ARM on AArch64 platforms
that showed a performance penalty of more than 50%, introduced by the
following commit:
9fac18f (oslib: allocate PROT_NONE pages on top of RAM, 2015-09-10)
We were only lucky before the above commit, because we were allocating
large regions and naturally getting a 2M alignment on those allocations
then.
Cc: qemu-stable@nongnu.org
Reported-by: Shih-Wei Li <shihwei@cs.columbia.edu>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NBD protocol does not (yet) force any alignment constraints
on clients. Even though qemu NBD clients always send requests
that are aligned to 512 bytes, we must be prepared for non-qemu
clients that don't care about alignment (even if it means they
are less efficient). Our use of blk_read() and blk_write() was
silently operating on the wrong file offsets when the client
made an unaligned request, corrupting the client's data (but
as the client already has control over the file we are serving,
I don't think it is a security hole, per se, just a data
corruption bug).
Note that in the case of NBD_CMD_READ, an unaligned length could
cause us to return up to 511 bytes of uninitialized trailing
garbage from blk_try_blockalign() - hopefully nothing sensitive
from the heap's prior usage is ever leaked in that manner.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1461249750-31928-1-git-send-email-eblake@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TCG code is quite performance sensitive, but at the same time can
also be quite tricky. That is why asserts that can be enabled with the
--enable-debug-tcg configure option.
This used to work the following way:
| #include "config.h"
|
| ...
|
| #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG)
| /* define it to suppress various consistency checks (faster) */
| #define NDEBUG
| #endif
|
| ...
|
| #include <assert.h>
Since commit 757e725b (tcg: Clean up includes) "config.h" as been
replaced by "qemu/osdep.h" which itself includes <assert.h>. As a
consequence the assertions are always enabled, even when using
--disable-debug-tcg, causing a performance regression, especially on
targets with many registers. For instance on qemu-system-ppc the
speed difference is about 15%.
tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already
uses in some places. This patch replaces all the calls to assert into
calss to tcg_debug_assert.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 32-bit ARM Linux kernel booting ABI requires that r0 is 0
when calling the kernel image. A bug in commit 10b8ec73e6
meant that for boards which use the write_board_setup hook (which
means "highbank", "midway", "raspi2" and "xilinx-zynq-a9") we
were incorrectly skipping the "clear r0" instruction in the
mini-bootloader. Use the right offset in the "add lr, pc, #n"
instruction so that we return from the board-setup code to the
correct place.
Signed-off-by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
[PMM: Expanded commit message]
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using K: in MAINTAINERS, false positives makes
get_maintainer.pl not use git history to find contributors. As
those patterns cause lots of false positives they are causing
more harm than good, so remove them.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1461164130-3847-1-git-send-email-ehabkost@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the regression test for the virtual size mismatch issue between
target and source images.
[ kwolf: Added test_unaligned_with_update ]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This retrieves the virtual size of the image out of qemu-img info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The last sub-chunk is rounded up to the copy granularity in the target
image, resulting in a larger size than the source.
Add a function to clip the copied sectors to the end.
This undoes the "wrong" changes to tests/qemu-iotests/109.out in
e5b43573e2. The remaining two offset changes are okay.
[ kwolf: Use DIV_ROUND_UP to calculate nb_chunks now ]
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
If the drive's dirty bitmap is dirtied while the mirror operation is
running, the cache of the iterator used by the mirror code may become
stale and not contain all dirty bits.
This only becomes an issue if we are looking for contiguously dirty
chunks on the drive. In that case, we can easily detect the discrepancy
and just refresh the iterator if one occurs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_iteration() is supposed to wait if the current chunk is subject
to a still in-flight mirroring operation. However, it mixed checking
this conflict situation with checking the dirty status of a chunk. A
simplification for the latter condition (the first chunk encountered is
always dirty) led to neglecting the former: We just skip the first chunk
and thus never test whether it conflicts with an in-flight operation.
To fix this, pull out the code which waits for in-flight operations on
the first chunk of the range to be mirrored to settle.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fixes inadvertant change that unconditionally disables qemu-ga unit test
* fixes make check failures when building with --disable-guest-agent that
were present visible before the unit test was inadvertantly disabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXFrFxAAoJEDNTyc7xCLWEfyQH/0BvK/wpiPxGUwVBdlVJeTGW
+PbkoB337KAyJj8AgHwACjN8KMZ2cGWVazsMRsDgFc5+RntPwLgeq/s9OFOeUoPX
oonH9oaMa4V8DR1XfnfbU9sPUiaupwzUQ85NZVNB1CsRtRKY/VhHf2I2ay0IEPDZ
0AM6VDbLrk5D2mVcbQk05khKjx6F1UpFHGlrynHTVYICmc4G9zUUanXO2I2QmdgF
H+SA3yEyVuwJj2R9jjlVJkykymzowIO5a1rjrR2bVXnsKlIYwtHF4UdtnhuslFxP
ONt3v3nRCN557yQMkXYaKaABYKgYQl0kKuueUXmlYY0EFHI5EkL8iphQlwYCssk=
=OvH2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2016-04-19-tag' into staging
qemu-ga patch queue for 2.6
* fixes inadvertant change that unconditionally disables qemu-ga unit test
* fixes make check failures when building with --disable-guest-agent that
were present visible before the unit test was inadvertantly disabled.
# gpg: Signature made Tue 19 Apr 2016 23:30:09 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2016-04-19-tag:
qemu-ga: do not run qga test when guest agent disabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When configure with --disable-guest-agent, make check will fail with:
ERROR:tests/test-qga.c:74:fixture_setup: assertion failed (error == NULL):
Failed to execute child process "/home/xx/qemu/qemu-ga" (No such file or
directory) (g-exec-error-quark, 8)
make: *** [check-tests/test-qga] Error 1
This check was commented out by bab47d9a75. I think that was by
mistake, because the commit message of that commit didn't mention
this change.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Update translation files (change created via 'make -C po update').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1461059023-14470-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Move qemu_gluster_close() further up in the file, in preparation
for the next patch, to avoid a forward declaration.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Upon error, gluster will call the aio callback function with a
ret value of -1, with errno set to the proper error value. If
we set the acb->ret value to the return value in the callback,
that results in every error being EPERM (i.e. 1). Instead, set
it to the proper error result.
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
FW CFG's primary user is QEMU, which uses it to expose configuration
information (in the widest sense) to Firmware. Thus the name FW CFG.
FW CFG can also be used by others for their own purposes. QEMU is
merely acting as transport then. Names starting with opt/ are
reserved for such uses. There is no provision, however, to guide safe
sharing among different such users.
Fix that, loosely following QMP precedence: names should start with
opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you
control.
Based on a more ambitious patch from Michael Tsirkin.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
A single fix for a regression since 2.5. This should be the last ppc
pull request for 2.6.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+Eci
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160419' into staging
ppc patch queueu for 2016-04-19
A single fix for a regression since 2.5. This should be the last ppc
pull request for 2.6.
# gpg: Signature made Tue 19 Apr 2016 02:48:30 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160419:
cuda: fix off-by-one error in SET_TIME command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes. However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.
This will corrupt QEMU memory, in most situations this causes the vm to
crash.
Fix by checking the offset against the array size.
Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit "156a2e4 ehci: make idt processing more robust" tries to avoid a
DoS by the guest (create a circular iTD queue and let qemu ehci
emulation run in circles forever). Unfortunately this has two problems:
First it misses the case of siTDs, and second it reportedly breaks
FreeBSD.
So lets go for a different approach: just count the number of iTDs and
siTDs we have seen per frame and apply a limit. That should really
catch all cases now.
Reported-by: 杜少博 <dushaobo@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the new framework the cuda_cmd_set_time command directly receive
the data, without the command byte. Therefore the time is stored at
in_data[0], not at in_data[1].
This fixes the "hwclock --systohc" command in a guest.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
[this fixes a regression introduced by e647317 "cuda: port SET_TIME
command to new framework"]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU complains about -cpu host on an AMD machine:
warning: host doesn't support requested feature: CPUID.80000001H:EDX [bit 0]
For bits 0,1,3,4,5,6,7,8,9,12,13,14,15,16,17,23,24.
KVM_GET_SUPPORTED_CPUID and and x86_cpu_get_migratable_flags()
don't handle the AMD CPUID aliases bits, making
x86_cpu_filter_features() print warnings and clear those CPUID
bits incorrectly.
To avoid hacking x86_cpu_get_migratable_flags() to handle
CPUID_EXT2_AMD_ALIASES (just like the existing hack inside
kvm_arch_get_supported_cpuid()), simply move the
CPUID_EXT2_AMD_ALIASES code in x86_cpu_realizefn() after the
x86_cpu_filter_features() call.
This will probably make the CPUID_EXT2_AMD_ALIASES hack in
kvm_arch_get_supported_cpuid() unnecessary, too. The hack will be
removed in a follow-up patch after v2.6.0.
Reported-by: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
X86CPU QOM type is in good hands and actively maintained these days, so
drop it from the generic QOM CPU subsystem.
Some refactorings and design questions will still intersect, but review
and discussions of individual series can still take place while opting out
of general X86CPU patch review.
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Three bugfixe patches for 2.6 here.
* Two for bad implementation of some of the strong load/store
instructions
* One for bad migration of the XER register. This is a regression
from 2.5, cause by a change in the way we represent at XER during
runtime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AnCp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160418' into staging
ppc patch queue for 2-16-04-18
Three bugfixe patches for 2.6 here.
* Two for bad implementation of some of the strong load/store
instructions
* One for bad migration of the XER register. This is a regression
from 2.5, cause by a change in the way we represent at XER during
runtime.
# gpg: Signature made Mon 18 Apr 2016 06:17:03 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160418:
ppc: Fix migration of the XER register
ppc: Fix the bad exception NIP value and the range check in LSWX
ppc: Fix the range check in the LSWI instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXEotmAAoJEP0M/1sS+L0vzAEIAImgDVmrNVPLfN+JZ6JGbbPG
VqcU2jJLF5caOv+VoGXgvfL03a7AlSAjoZ2ghf3ncokB7+81Z2h9kiskbR07VRNR
bTCQley1xZyU2O8l8ckI5Lyc8vm+UmVwiDiMg93cH/kcbOaltz9xYu+PPrQTEQXG
lvikpI/wIsyo3nveKBCvnzKUnz8mX7dyHwUD5J7cDAqfa6XuEkJLMbHAjIS3kr9Z
UPC0olxrVil+HxCQUkQemwO+mhhgA6l+oqRNlDIwJU2d/e5HX43YWp6ETNkW8Bnd
vI5tIM/tjjX32pqcMbcfpLC8wqSZPocxCSZgKV8a1OQyFXPu/v9QaP/qqGDezrI=
=oVhZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20160416' into staging
seccomp branch queue
# gpg: Signature made Sat 16 Apr 2016 19:58:46 BST using RSA key ID 12F8BD2F
# gpg: Good signature from "Eduardo Otubo (Software Engineer @ ProfitBricks) <eduardo.otubo@profitbricks.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C96 46B6 E1D1 C38A F2EC 3FDE FD0C FF5B 12F8 BD2F
* remotes/otubo/tags/pull-seccomp-20160416:
seccomp: adding sysinfo system call to whitelist
seccomp: Whitelist cacheflush since 2.2.0 not 2.2.3
configure: Enable seccomp sandbox for MIPS
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
env->xer only holds the lower bits of the XER register nowadays, the
SO, OV and CA bits are stored in separate variables (see the function
cpu_write_xer() for details). Since the migration code currently only
reads the "xer" variable, the upper bits are lost during migration.
Fix it by using cpu_read_xer() instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The range checks in the LSWX instruction are completely insufficient:
They do not take the wrap-around case into account, and the check
"reg < rx" should be "reg <= rx" instead. Fix it by using the new
lsw_reg_in_range() helper function that is already used for LSWI, too.
Then there is a second problem: In case the INVAL exception is generated,
the NIP value is wrong, it currently points to the instruction before
the LSWX instruction. This is because gen_lswx() already decreases the
NIP value by 4 (to be prepared for page fault exceptions), and
powerpc_excp() later decreases it again by 4 while handling the program
exception. So to get this right, we've got to undo the "- 4" from
gen_lswx() here before calling helper_raise_exception_err().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are two issues: First, the number of registers that are used has
to be calculated with "(nb + 3) / 4" (i.e. round always up, not down).
Second, the "start <= ra && (start + nr - 32) > ra" condition for the
wrap-around case is wrong: It has to be tested with "||" instead of "&&".
Since we can reuse this check later for the LSWX instruction, let's
place the fixed code into a helper function, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Newer version of nss-softokn libraries (> 3.16.2.3) use sysinfo call
so qemu using rbd image hang after start when run in sandbox mode.
To allow using rbd images in sandbox mode we have to whitelist it.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
The cacheflush system call (found on MIPS and ARM) has been included in
the libseccomp header since 2.2.0, so include it back to that version.
Previously it was only enabled since 2.2.3 since that is when it was
enabled properly for ARM.
This will allow seccomp support to be enabled for MIPS back to
libseccomp 2.2.0.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-By: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Enable seccomp on MIPS since libseccomp version 2.2.0 when MIPS support
was first added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
It is broken since commit c619644067.
Reported-by: Michael Fritscher <michael@fritscher.net>
Tested-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=qnSC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches for 2.6.0-rc3
# gpg: Signature made Fri 15 Apr 2016 17:02:23 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
nbd: Don't kill server on client that doesn't request TLS
nbd: fix assert() on qemu-nbd stop
nbd: Don't fail handshake on NBD_OPT_LIST descriptions
qemu-iotests: 041: More robust assertion on quorum node
qemu-iotests: place valgrind log file in scratch dir
qemu-iotests: tests: do not set unused tmp variable
qemu-iotests: common.rc: drop unused _do()
qemu-iotests: drop unused _within_tolerance() filter
Fix pflash migration
block: Don't ignore flags in blk_{,co,aio}_write_zeroes()
block/vpc: update comments to be compliant w/coding guidelines
block/vpc: set errp in vpc_open
block/vpc: make checks on max table size a bit more lax
block/vpc: Use the correct max sector count for VHD images
block/vpc: use current_size field for XenConverter VHD images
vpc: use current_size field for XenServer VHD images
block/vpc: set errp in vpc_create
block: Fix blk_aio_write_zeroes()
qemu-io: Support 'aio_write -z'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXEQ9qAAoJEDuxQgLoOKytNf4IAKIpgbFOAsIpJOAcNxsAveP1
uKqxK6pUYIz2Q+qOfAkFhXdHMmmf8APSzyMRcUNTpYL7c2V4uvV5Bn+Ry1rPFSMg
c4gX74TNrbYs/3RtyRmJadq6dUoyl2gFZWH8nEhEIF/DLYapnstuSmrKGNFesNP5
LNcJojUAh4aY+kflndsuFqPY7A56crpngsmSPiLZc8beJnLpg6aPhr+ByLh1SgXL
O51Rf7rBaIls1w3jOJtwnctuDe934B6yYfSlqHtUFpuRQaoakv59Ow4436SlTcMf
ZyyEhLC6FKM1SpOHvwSrCDzU7hxiAecFTMQs4un/cDV22dzxRZS40p5t3wjVIts=
=lTt/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-04-15' into queue-block
Block patches for 2.6.0-rc3.
# gpg: Signature made Fri Apr 15 17:57:30 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-04-15:
nbd: Don't kill server on client that doesn't request TLS
nbd: fix assert() on qemu-nbd stop
nbd: Don't fail handshake on NBD_OPT_LIST descriptions
qemu-iotests: 041: More robust assertion on quorum node
qemu-iotests: place valgrind log file in scratch dir
qemu-iotests: tests: do not set unused tmp variable
qemu-iotests: common.rc: drop unused _do()
qemu-iotests: drop unused _within_tolerance() filter
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upstream NBD documents (as of commit 4feebc95) that servers MAY
choose to operate in a conditional mode, where it is up to the
client whether to use TLS. For qemu's case, we want to always be
in FORCEDTLS mode, because of the risk of man-in-the-middle
attacks, and since we never export more than one device; likewise,
the qemu client will ALWAYS send NBD_OPT_STARTTLS as its first
option. But now that SELECTIVETLS servers exist, it is feasible
to encounter a (non-qemu) client that is programmed to talk to
such a server, and does not do NBD_OPT_STARTTLS first, but rather
wants to probe if it can use a non-encrypted export.
The NBD protocol documents that we should let such a client
continue trying, on the grounds that maybe the client will get the
hint to send NBD_OPT_STARTTLS, rather than immediately dropping
the connection.
Note that NBD_OPT_EXPORT_NAME is a special case: since it is the
only option request that can't have an error return, we have to
(continue to) drop the connection on that one; rather, what we are
fixing here is that all other replies prior to TLS initiation tell
the client NBD_REP_ERR_TLS_REQD, but keep the connection alive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1460671343-18485-1-git-send-email-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
From time to time qemu-nbd is crashing on the following assert:
assert(state == TERMINATING);
nbd_export_closed
nbd_export_put
main
and the state at the moment of the crash is evaluated to TERMINATE.
During shutdown process of the client the nbd_client_thread thread sends
SIGTERM signal and the main thread calls the nbd_client_closed callback.
If the SIGTERM callback will be executed after change the state to
TERMINATING, then the state will once again be TERMINATE.
To solve the issue, we must change the state to TERMINATE only if the state
is RUNNING. In the other case we are shutting down already.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1460629215-11567-1-git-send-email-den@openvz.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
