The filter field is often used to check whether a filter is
configured. If configuring the filter actually fails somewhere in
the middle of it, these fields could still be set to non-NULL, which
lead to other code accessing the half-configured filter graph, which
in turn could lead to crashes within libavfilter.
Solve this by properly resetting all fields.
This was triggered by a fuzzed sample after the recent changes. It's
unknown whether this behavior could be triggered before that.
If a subtitle packet came before the first video frame could be fully
decoded, the subtitle packet would get discarded. This puts the subtitle
into a queue instead, and processes it once the attached filter graph is
initialized.
Be more careful when an input stream encounters EOF when its filtergraph
has not been configured yet. The current code would immediately mark the
corresponding output streams as finished, while there may still be
buffered frames waiting for frames to appear on other filtergraph
inputs.
This should fix the random FATE failures for complex filtergraph tests
after a3a0230a98
This merges Libav commit 94ebf55. It was previously skipped.
This is the last filter init related Libav commit that was skipped, so
this also removes the commits from doc/libav-merge.txt.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This is a more appropriate place for it, and will also be useful in the
following commit.
This merges Libav commit d2e56cf. It was previously skipped.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.
This merges Libav commit a3a0230. It was previously skipped.
The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.
The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.
The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.
The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This will be useful in the following commit, after which the muxer
timebase is not always available when encoding.
This merges Libav commit 3e265ca. It was previously skipped.
There are some changes with how/when the mux_timebase field is set,
because the Libav approach often causes a too imprecise time base
to be set. This is hard, because the muxer's write_header function
can readjust the timebase, at which point we might already have
encoded packets buffered. (It might be better to buffer them after
the encoder, instead of after all the timestamp handling logic
before muxing.)
The two FATE tests change because the output time base is raised
for subtitles. (Needed to avoid certain rounding issues in other
cases.)
Includes a minor merge fix by Mark Thompson, and
avconv: Move rescale to stream timebase before monotonisation
also by Mark Thompson <sw@jkqxz.net>.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Some callers (like do_subtitle_out()) call this with an AVPacket that is
not refcounted. This can cause undefined behavior.
Calling av_packet_move_ref() does not make a packet refcounted if it
isn't yet. (And it can't be made to, because it always succeeds,
and can't return ENOMEM.)
Call av_packet_ref() instead to make sure it's refcounted.
I couldn't find a case that is fixed by this with the current code. But
it will fix the fate-pva-demux test with the later patches applied.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Found a case where we use size==0, the other related commits
remain needed, and should be sufficient to fix the original issue
This reverts commit 7e4f32f4e4.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If AVVideotoolboxContext.cv_pix_fmt_type is set to 0, don't set the
kCVPixelBufferPixelFormatTypeKey value on the VT decoder.
This makes VT output its native format, which can be much faster on
some hardware iterations (if the native format does not match with
the requested format, it will be converted, which is slow).
The default is still forcing nv12.
Public fields were added after the private fields (negating the entire
point of this). New private fields go into AVStreamInternal anyway.
The new marker was set by guessing which fields are supposed to be
private and wshich not. recommended_encoder_configuration is accessed by
ffserver_config.c directly, and is supposed to use the public API.
ffmpeg.c accesses AVStream.cur_dts, even though it's a private field,
but that seems to be an older error.
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
Similar code is used elsewhere in vp56 to force a more complete reinit in the future.
Fixes null pointer dereference
Fixes: 707/clusterfuzz-testcase-4717453097566208
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes undefined shift, all callers should be changed to check the value
they use with wp_exp2() or its return value.
Fixes: 692/clusterfuzz-testcase-5757381516460032
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This matches ff_h263_decode_motion() both functions error codes are interpreted by the same common code
Fixes: 690/clusterfuzz-testcase-4744944981901312
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes timeout with 686/clusterfuzz-testcase-5853946876788736
this shortcuts (i.e. speeds up) the error and
return-to-user when decoding a truncated frame
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Previous version reviewed by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
qmin and qmax are not necessary for nvenc vbr.
Enforcing this constraint, doesn't allow user to use vbr 2 pass mode without explicity setting the qmin and qmax options
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Rodger Combs will be added to the ffmpeg-security alias when this patch is applied
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
wm4 will be added to the ffmpeg-security alias when this patch is applied
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
