Commit Graph

2037 Commits

Author SHA1 Message Date
Luca Barbato
3ae0e721c7 checkasm: Always link statically
Checkasm needs to use internal symbols that should not be made public.
2015-07-21 23:22:42 +02:00
Janne Grunau
c9f8cfb6d9 fate: add checkasm target 2015-07-18 01:06:45 +02:00
Janne Grunau
82e6ac85ff checkasm: test all architectures with optimisations 2015-07-18 01:06:45 +02:00
Michael Niedermayer
cb33f8d0f4 checkasm: Give macro a body to avoid potential unexpected syntax issues 2015-07-18 01:06:44 +02:00
Henrik Gramner
6cc4d3e9a9 checkasm: exit with status 0 instead of 1 if there are no tests to perform 2015-07-18 01:06:44 +02:00
Luca Barbato
fc56868399 cosmetics: Reformat checkasm tests 2015-07-17 21:29:20 +02:00
Henrik Gramner
d37f232635 checkasm: Add unit tests for bswapdsp
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-17 20:03:55 +02:00
Henrik Gramner
2cb34f82b9 checkasm: Add unit tests for h264qpel
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-15 19:47:07 +02:00
Henrik Gramner
8bc67ec2c0 Checkasm: assembly testing and benchmarking tool
It provides the following features:
 * verify correctness by comparing output to the C version.
 * detect failure to save and restore clobbered callee-saved registers.
 * detect 32-bit parameters being used as if they were 64-bit in x86-64
   (the upper halves are not guaranteed to be zero - but in practice
   they very often are, which makes those bugs hard to spot otherwise).
 * easy benchmarking.

Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.

Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.

Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.

Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.

Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
2015-07-12 16:39:07 +02:00
Stian Selnes
02b7c63087 h261: Signal freeze picture release for intra frames
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.

Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.

Bug-Id: 873
CC: libav-stable@libav.org

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-07 15:11:15 +02:00
Stian Selnes
dc1de0b958 h261: Set 'still image mode off' in picture header
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.

Fixes H.261 calls to Cisco E20.

Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.

Bug-Id: 872
CC: libav-stable@libav.org

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-07 15:04:55 +02:00
Janne Grunau
a31c4b2cbe fate-g2m3: disable the audio stream
The audio decoder is not in fate-g2m3 dependencies and the wma2 decoder
is probably not bit-exact since it it float based.
2015-07-01 21:42:48 +02:00
Janne Grunau
f91fe24e9b g2meet: force simple idct for identical results over all fate configs 2015-07-01 15:33:20 +02:00
Diego Biurrun
4d1229dabf g2meet: Add FATE tests for all three G2M variants
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-01 01:08:15 +02:00
Martin Storsjö
e2bd03a14a fate: Avoid unnecessary pixel format conversions
Most of the fate-dds-* and fate-txd-* tests already
output into the same pixel format regardless of
platform endianness, so there's no need to force
conversion to another format.

This fixes the tests fate-txd-16bpp, fate-txd-odd,
fate-dds-rgb16, fate-dds-rgb24 and fate-dds-xrgb on
big endian, where the tests seem to fail due to issues
with certain conversion codepaths in swscale.

Those conversion codepaths should of course be fixed, but
the individual decoder tests should use as little extra
conversion steps as possible.

Signed-off-by: Martin Storsjö <martin@martin.st>
2015-06-30 23:10:29 +03:00
Luca Barbato
e95c7a6185 mov: Preserve the metadata even when bit-exactness is requested
Make sure to not write the custom `encoder` string in that case.

Bug-Id: 845
CC: libav-stable@libav.org
2015-06-30 15:34:38 +02:00
Vittorio Giovara
3ad678a85b fate: Update ac3 test to the new request_channel_layout option 2015-06-30 15:34:37 +02:00
Alexandra Hájková
b08569a239 lavf: Replace the ASF demuxer
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.

This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.

The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-06-28 10:16:40 +02:00
Anton Khirnov
441e8ae5ef FATE: drop the last truncated frame from the wmapro tests
Since it's truncated, the result depends on how specifically the demuxer
and the decoder handle errors.
2015-06-28 10:10:36 +02:00
Anton Khirnov
d3ea79e8a6 FATE: drop the last truncated frame from the wma lossless test
Since it's truncated, the result depends on how specifically the demuxer
and the decoder handle errors.
2015-06-28 10:10:07 +02:00
Vittorio Giovara
5c018ee188 DirectDraw Surface image decoder
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-06-22 15:23:08 +01:00
Vittorio Giovara
7ca3e5203f Hap decoder and encoder
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-06-22 15:23:08 +01:00
Vittorio Giovara
c0b105756f txd: Use the TextureDSP module for decoding
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-06-22 15:23:08 +01:00
Luca Barbato
c060d046aa af_resample: Set the number of samples in the last frame
Otherwise trailing zeroes would appear.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-06-20 12:18:01 +03:00
nu774
6ec688e1bc mp3: enable packed main_data decoding in MP4
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.

However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.

In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.

Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-06-20 12:18:01 +03:00
Martin Storsjö
063f7467e4 rtmpdh: Add fate test for the DH handshake routine
This helps if these functions need to be implemented using another
crypto API.

Signed-off-by: Martin Storsjö <martin@martin.st>
2015-05-29 09:42:35 +03:00
Luca Barbato
2fb02ecfd1 fate: Reduce the number of frames used to test video filters
Use 5 frames for video filter tests and a single one for the
pixelformat tests.

Greatly reduces the test duration without reducing coverage.
2015-05-10 13:49:30 +02:00
Vittorio Giovara
d81fb63d87 fate: Add a PICT test
This stimulates the direct pixel mode in Quickdraw decoder.
2015-05-06 14:36:01 +01:00
Vittorio Giovara
7b734ee55d lavf: Open PICT images with Quickdraw
Update the pictor test to use the pictor codec, as both formats share
the .pic file extension.
2015-05-06 14:27:34 +01:00
Timothy Gu
358b7ec309 fate: Fix test name for pixfmts tests
The last pixel format gets leaked as `$test` further down the pipeline.

See for example https://fate.libav.org/x86_32-netbsd-clang-no-inline-asm/20150420020104
Note the odd test names like “yuvj444p.”

CC: libav-stable@libav.org

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-04-23 12:47:00 +02:00
Timothy Gu
3b1e35d46d fate: Omit the results if the test passed
The FATE server does not report this information anyway and omitting
it makes the successful run send much less data.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-04-20 12:41:34 +02:00
Vittorio Giovara
22526c1f55 Canopus HQ/HQA decoder
Based on work by Kostya Shishkov <kostya.shishkov@gmail.com>.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-04-19 22:37:23 +01:00
Vittorio Giovara
fcda30f2dc fate: Prefix cllc tests with canopus
They belong to the same family of codecs.
2015-04-19 22:36:50 +01:00
Ferdinand Oeinck
0266988ccd hqx: Fix clipping error in idct put function
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-04-09 13:52:04 +02:00
Anton Khirnov
b2965ec776 FATE: add a test for parameter changes in HEVC 2015-04-03 13:10:03 +02:00
Vittorio Giovara
7419b34825 fate: Add test for tscc2 in mov
Rename the existing tscc2 test.
2015-03-23 20:53:28 +00:00
Vittorio Giovara
6289706b35 fate: Move tdsc to the appropriate screen capture file 2015-03-17 13:36:10 +00:00
Janne Grunau
f01c771577 fate: add explicit support for the toolchain configure option 2015-03-16 11:55:47 +01:00
Diego Biurrun
acbe15a99f fate: Add test for DCA XLL 2015-03-15 14:51:44 +01:00
Vittorio Giovara
247e370e2a TDSC decoder
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-03-13 19:48:14 +00:00
Anton Khirnov
96a06dbaf2 FATE: add support for testing hwaccels 2015-03-10 07:40:11 +01:00
Martin Storsjö
62139b14e6 fate: Specify the idct to use for the aic-oddsize test
This fixes fate on all architectures that have an optimized
but not bitexact idct available.

Signed-off-by: Martin Storsjö <martin@martin.st>
2015-03-04 13:11:58 +02:00
Vittorio Giovara
994d8f3095 fate: Add AIC test with odd sizes 2015-03-03 15:08:45 +00:00
Diego Biurrun
ce52869c22 fate: Rename fate-dts test to fate-dca-core
The codec is referred to as DCA in other parts of libav.
2015-02-23 16:26:32 +01:00
Vittorio Giovara
35c6ce76b1 Canopus HQX decoder
Based on work by Kostya Shishkov <kostya.shishkov@gmail.com>.
2015-02-22 22:42:27 +00:00
Clément Bœsch
a982c5d74f tests: drop bc dependency
We already have a dependency on awk and bc is sometimes not found in the
base system.

Signed-off-by: Martin Storsjö <martin@martin.st>
2015-02-21 11:17:45 +02:00
Vittorio Giovara
b727b0eeb7 fate: Add tests for DSS
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
2015-02-19 12:05:19 -05:00
Anton Khirnov
e21d853099 FATE: add a test for the SVQ1 header byte swapping 2015-02-15 15:30:29 +01:00
Alex Converse
9295d10ea9 fate: Add a test for AAC ELD480.
The source is er_eld_2100np_48_ep0.mp4 from the official test set.
2015-02-06 18:56:22 -08:00
Anton Khirnov
80a11de7dc nutenc: do not use has_b_frames
It is unreliable, especially when the stream codec context is not the
encoding context. Use the codec descriptor properties instead.
2015-01-27 09:15:07 +01:00
Vittorio Giovara
2df7277711 swscale: fix gbrap to gbrap alpha scaling 2015-01-16 02:47:15 +01:00
Paul B Mahol
928061670e libswscale: GBRAP input & output and GBRAP16 input support
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-01-14 17:17:24 +01:00
Martin Storsjö
50036c30df fate: Use bitexact conversions in the dpxparser test
This fixes fate on e.g. ppc.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-12-29 23:21:43 +02:00
Vittorio Giovara
effa7d2a6a fate: add test for offset theora 2014-12-18 23:22:59 +01:00
Vittorio Giovara
a381e0cec8 fate: add a DPX parser test 2014-12-18 23:22:59 +01:00
Janne Grunau
d2f1d42b18 fate: add dolby true hd tests
The existing meridian audio test does not test
ff_mlp_rematrix_channel_arm. This sample (first 640k of
https://samples.libav.org/A-codecs/TrueHD/TrueHD.raw) uses
ff_mlp_rematrix_channel_arm. Since this sample has 5.1 channels it also
allows testing the integrated downmixing.
2014-12-09 22:00:08 +01:00
Joakim Plate
90411b333d Allow reading of growing avi files (currently being written)
This uses the RIFF header stored size to figure out the expected AVI
file size, instead of the actual file. To work fully it requires handling
failed avio_seek() instead of assuming they always succeed.

Some fate file has been cut off and contains half a frame at the end which
previously was not output during demuxing. This frame is now output to
encoder, thus the fate diff update.

Bug-Id: 261
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-12-08 13:29:33 +00:00
Zoltan Kovacs
4843a9c74f dpx: always write the image offset
According to the DPX file format description found at
http://www.fileformat.info/format/dpx/egff.htm the ImageElement part of
the GenericImageHeader also contains an an offset to the real image data
beside the same member that can be found in the GenericFileHeader.

Libav keeps this member empty (=0) while some applications expects it to
be filled properly. FATE test updated accordingly.

Bug-Id: 742
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-12-08 13:29:18 +00:00
Kieran Kunhya
9a738c27dc v210enc: Add SIMD optimised 8-bit and 10-bit encoders
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-12-05 13:03:49 +00:00
Derek Buitenhuis
33c827f632 swscale: Properly scale YUV
Only shift limited range luma, and always only shift chroma
for upconversion.

Based off a patch by Michael Niedermayer.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2014-12-05 13:03:49 +00:00
Reinhard Tartler
8895bf7b78 Replace lena.pnm
The new reference.pnm is a freely licensed replacement. The photo has
been taken by Reinhard Tartler on August 28 2014, and is licensed under
the expat license as stated at http://www.jclark.com/xml/copying.txt
2014-11-28 17:55:27 -05:00
Vittorio Giovara
28d82b7675 vc1dec: refactor check with missing parenthesis
FATE tests updated accordingly, no visual difference.

CC: libav-stable@libav.org
Bug-Id: CID 1087087
2014-11-13 01:41:25 +01:00
Janne Grunau
04d8af5f17 fate-mpeg4: use TARGET_SAMPLES for resize tests 2014-10-21 09:57:10 +02:00
Janne Grunau
f29c226af0 fate: add mpeg4 tests for frame size changes 2014-10-17 09:58:31 +02:00
Michael Niedermayer
bd239c9a2e lavf: Don't drop both pts and dts if timestamps are invalid
In these cases, only drop dts. Because if we drop both we have no
timestamps at all for some files.

This improves playback of HLS streams from GoPro cameras.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-10-12 01:32:52 +03:00
Janne Grunau
36f3aec363 fate-vc1_ilaced_twomv: use -flags +bitexact
Also updates the reference since it was generated by the non-bitexact
x86 specific code.
2014-10-04 11:21:32 +02:00
Tim Walker
b39ebcddd4 fate: Add VC-1 interlaced twomv test
CC: libav-stable@libav.org
2014-09-26 16:55:59 +02:00
Katerina Barone-Adesi
28f5cd312c fate: Switch ra4-288 test from framecrc() to pcm()
The decoder is float-based and the test needs to allow for some fuzz.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-09-25 01:44:31 -07:00
Katerina Barone-Adesi
44caf99eca fate: Add tests for RealAudio 1.0 (14.4) and RealAudio 2.0 (with 28.8)
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-09-17 05:16:08 -07:00
Pascal Massimino
7a1d6ddd2c xvid: Add C IDCT
Thanks to Pascal Massimino and Michael Militzer for relicensing as LGPL.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-09-02 14:41:13 -07:00
Anton Khirnov
cb7b1a2dfb electronicarts: set the framerate for TGQ/TQI
It is hardcoded to 15fps.
2014-08-22 11:15:20 +00:00
Anton Khirnov
7b6aae23e1 electronicarts: read the framerate for MAD 2014-08-22 11:15:20 +00:00
Gabriel Dume
4b1f5e5090 cosmetics: Write NULL pointer inequality checks more compactly
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-08-15 05:34:13 -07:00
Janne Grunau
d395895cdb fate: generate tests/pixfmts.mak for all targets requiring it
All subtargets which should run the fate-filter-pixdesc% need to
generate and include tests/pixfmts.mak. Most noteable missing target was
fate itself.
2014-08-05 12:18:59 +02:00
Diego Biurrun
eee813eec7 fate: Only generate tests/pixfmts.mak if some pixfmts fate test is run 2014-08-04 11:08:35 -07:00
Vittorio Giovara
086a541857 fate: png-suite
Every supported format is converted to RGB.
2014-08-04 12:57:39 +01:00
Janne Grunau
23dfa00b88 fate: explicitly set the default THREADS value
This makes the default of '1' more explicit than defaulting to '1' in
fate-run.sh and regression-funcs.sh if THREADS is not set.
Fixes the reported thread count in fate-cpu if THREADS is not set.
2014-08-04 12:20:56 +02:00
Janne Grunau
caf5ef852b cpu-test: test av_cpu_count
Add CPU count and number threads as informative values for fate.
2014-08-04 00:17:21 +02:00
Janne Grunau
07d8fa5812 fate: add informative cpu test
libavutil/cpu-test prints raw and effective cpu flags to STDERR. Detected
cpu flags can be useful for debugging fate errors.

No comparison of the result against a expected result since that would
require fate config specific references.
2014-08-04 00:17:21 +02:00
Diego Biurrun
706208ef47 fate: Split fate-pixdesc tests and dispatch them through Make
This allows running all the tests individually and/or in parallel.
2014-08-01 01:18:30 -07:00
Janne Grunau
42eb9154a8 fate: support testing of release branches
Adding 'branch=release/10' to the fate config file will check the
release/10 branch instead of master. If no branch is specified it will
use 'master' so that existing config are still valid.

The server side changes are already deployed, see
https://fate.libav.org/v10/ for an example. The server supports only the
release/* branches.

The server enforces that a single slot tests always the same branch.
Please append "-v$RELEASE" to the slot of release branch configs or make
the slot otherwise unique.

A different fate samples dir is needed for each release branch. make
fate-rsync has the correct URL in each branch.
2014-07-27 14:41:09 +02:00
Katerina Barone-Adesi
4d2d0595cf fate: Split audio- and video-related RealMedia targets
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-07-21 12:13:58 -07:00
Diego Biurrun
16b7328058 build: Conditionally build and run DCT test program 2014-07-21 05:32:35 -07:00
Diego Biurrun
bd499d9af6 build: Conditionally build and test iirfilter 2014-07-21 05:32:07 -07:00
Vittorio Giovara
819bb3e81c fate: add h264-direct-bff test 2014-07-20 23:32:13 +01:00
Martin Storsjö
f9900822fc fate: Use the correct, local path to samples for opus reference files
This fixes running fate in configs where the samples are located
in a different path on the target.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-07-14 22:12:28 +03:00
Diego Biurrun
24f45c1622 fate: Add dependencies for dct/fft/mdct/rdft tests 2014-06-26 16:03:21 -07:00
Anton Khirnov
194be1f43e lavf: switch to AVStream.time_base as the hint for the muxer timebase
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.

The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
2014-06-18 15:12:34 +02:00
Anton Khirnov
894682a973 Remove avserver.
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
2014-06-18 14:55:28 +02:00
Josh Allmann
74bc945805 flvenc: Don't over-count metadata.
Over-counting occurs if framerate is not set.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-06-17 21:38:21 +02:00
Vittorio Giovara
641e57230b fate: add on2avc audio test 2014-06-10 19:41:59 -04:00
Marc-Antoine Arnaud
8a06794112 mpeg2: add sequence display extension information
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2014-06-06 15:38:10 +01:00
Anton Khirnov
962d631573 matroskaenc: set the stream timebase earlier
Fixes calculating the ts offset for audio codecs with delay.
2014-05-29 08:01:58 +02:00
Anton Khirnov
43e7f0797f flvenc: only write the framerate tag based on avg_frame_rate
Do not fall back on the codec timebase, since that can be anything for
VFR video.
2014-05-29 08:01:30 +02:00
Anton Khirnov
81eec081af matroskaenc: base DefaultDuration on the framerate, not the codec timebase
This results in DefaultDuration not being written when the framerate is
not known, but as this field is purely informative, this should not
break any sane demuxers.
2014-05-29 08:00:57 +02:00
Michael Niedermayer
7dba055bb0 oggenc: Fix the EOS flag
This corrects the bug that caused the checksums to change in
9767d7c092.

It caused the EOS flag to be set incorrectly; the ogg spec does not
allow it to be set in the middle of a logical bitstream.

Signed-off-by: Andrew Kelley <superjoe30@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
2014-05-28 21:51:38 +03:00
Andrew Kelley
9767d7c092 oggenc: Flush after writing headers
Before, header information for ogg format files was sent with the
first encoded packet.

This patch makes it so that it is possible for API users to
differentiate between headers and encoded audio. This is useful, for
example, when creating an audio stream where you want to send one set
of headers for every client that connects and then the encoded stream
of audio.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-05-27 20:16:59 +03:00
Anton Khirnov
6656370b85 avconv: set the "encoder" tag when transcoding 2014-05-18 20:33:46 +02:00
Anton Khirnov
4735784f1c FATE/opus: increase fuzz for the celt tests
This seems to be needed on some 32bit arches.
2014-05-16 14:35:20 +02:00
Anton Khirnov
0c1959b056 lavf: add AVFMT_FLAG_BITEXACT.
Use it instead of checking CODEC_FLAG_BITEXACT in the first stream's
codec context.

Using codec options inside lavf is fragile and can easily break when the
muxing codec context is not the encoding context.
2014-05-15 07:42:07 +02:00
Anton Khirnov
b70d7a4ac7 lavc: add a native Opus decoder.
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.

Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.

Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
2014-05-15 06:49:34 +02:00
Anton Khirnov
6072184e70 asfenc: use codec descriptors instead of AVCodecs to write codec info
Also, stop using AVCodecContext.codec_name as fallback, since it will be
deprecated.

Changes the result of the lavf-asf test (and its associated seektest),
since 'msmpeg4v3' gets written instead of just 'msmpeg4'.
2014-05-01 09:26:20 +02:00
Anton Khirnov
a1aa37dd0b matroskaenc: write CodecDelay 2014-05-01 08:03:51 +02:00
Derek Buitenhuis
8de77b665d fate: Add fic-in-avi test
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2014-04-24 22:00:50 +01:00
Anton Khirnov
a4ed995cab txd: do not set the codec timebase.
It is not supposed to be changed from outside of lavc.
Set the stream timebase and average framerate instead.
2014-04-22 07:44:16 +02:00
Martin Storsjö
911fa05b51 mvc: Specify the pixel format for the mv-mvc* tests
Also set the RGBA pixel format correctly as the native endian format,
which is what it returns.

This fixes the tests on big endian.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-04-19 21:41:34 +03:00
Vittorio Giovara
6dfd99c938 fate: add tests for SGI RLE and MVC1&2 decoders 2014-04-19 16:24:27 +02:00
Alessandro Ghedini
0983d48111 crc: add ANSI CRC16 LE
This adds the reversed byte-order version of the ANSI CRC16.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-04-17 20:08:19 +02:00
Anton Khirnov
13164e479f FATE: add tests for more resampling modes 2014-04-13 11:20:49 +02:00
Anton Khirnov
f7c5fd8151 resample: implement flushing 2014-04-13 11:15:45 +02:00
Justin Ruggles
d9a542ace1 swscale: Set alpha to opaque for internal palettes.
Fixes conversion of pal8 to rgb formats with alpha.

Updated references for 2 FATE tests which previously encoded fully
transparent images.

Based on a patch by Baptiste Coudurier <baptiste.coudurier@gmail.com>
2014-04-12 14:07:19 -04:00
Vittorio Giovara
60fd7d36c4 fate: correctly set sample rate for mp2 tests 2014-04-09 02:11:25 +02:00
Vittorio Giovara
59388dac69 fate: update tests for YVYU422 pixel format 2014-04-08 23:24:41 +02:00
Paul B Mahol
a027d2a873 fate: add tests for SANM and VIMA
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-04-06 16:42:15 +02:00
Vittorio Giovara
287432430c fate: add a VP7 test 2014-04-04 04:00:11 +02:00
Martin Storsjö
66d04c068a fate: Explicitly use gray16le in fate-sgi-gray16
This fixes the test on big endian.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-04-01 12:05:15 +03:00
Vittorio Giovara
55c6e59906 fate: add SGI tests 2014-04-01 01:19:04 +02:00
Paul B Mahol
06688e96fb fate: add exr tests
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-04-01 01:13:17 +02:00
Martin Storsjö
3e4e2142d2 fate: Convert the paletted output in the brenderpix tests to rgb24
This makes the output consistent on big-endian systems.
2014-03-31 01:04:05 +02:00
Vittorio Giovara
e8e560f2a2 fate: add a bmpparser test 2014-03-28 00:08:24 +01:00
Vittorio Giovara
991362fab4 fate: add XBM tests 2014-03-27 23:59:13 +01:00
Paul B Mahol
a7a5e3850e fate: add PAF audio and video tests
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-03-27 23:34:47 +01:00
Vittorio Giovara
bb36b9aa7e fate: add BRender PIX tests 2014-03-27 18:27:23 +01:00
Vittorio Giovara
9718c31ef6 fate: add Alias PIX tests 2014-03-26 23:25:02 +01:00
Janne Grunau
f0f687446e float_dsp: add test program and use it as fate test 2014-03-18 13:08:00 +01:00
Anton Khirnov
a84c8af042 FATE: add a test for the ONE_STR mapping mode of the channelmap filter 2014-03-16 07:44:03 +01:00
Matthieu Bouron
5b930092c3 mxf: Set audio packets pts
Extrapolate audio timestamps based on the number of samples demuxed.

Deal with some MXF nastiness involving fractional number of
samples per EditUnit when seeking (the specs handwave this away).

Further fixes from Tomas Härdin.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2014-03-06 19:28:20 +01:00
Anton Khirnov
e1f2987b10 FATE: add tests for the shuffleplanes filter 2014-03-05 21:52:03 +01:00
Jan Ekström
3fbad00714 utvideoenc: Enable support for multiple slices and use them
The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.

Also sets slices to 1 for the Ut Video encoder tests to keep them
green.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2014-02-14 15:09:39 +00:00
Ronald S. Bultje
dff1c19140 vp9: add a new segmentation sample.
The old one didn't use segmentation. One uses segmentation in all frame
types (--aq-mode=1), and the other uses all segmentation features, but
only in inter frames (mbgraph).

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-02-12 15:18:21 +01:00
Ronald S. Bultje
91be8df20b vp9: add fate sample for parallelmode.
This disables backward probability updates, which makes the codec more
friendly for frame-level multi-threading.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-02-12 15:17:40 +01:00
Guillaume Martres
f548f9f9e7 hevc: update conformance streams
New streams: LTRPSPS_A_Qualcomm_1, SLPPLP_A_VIDYO_1, VPSID_A_VIDYO_1
Updated streams: EXT_A_ericsson_4, NUT_A_ericsson_5, RPS_C_ericsson_5,
  RPS_D_ericsson_6

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-02-10 07:48:41 +01:00
Anton Khirnov
b5f851ed7e FATE: force FLAC in the lavf ogg test
Since b0c2c09, vorbis would be used if libvorbis is compiled in.
2014-02-10 07:43:40 +01:00
Janne Grunau
5a0bccd281 fate: force the simple idct for xvid custom matrix test
The original test without a forced idct is still useful since it tests
the switching of the idct algorithm/permutation on x86 with MMX. MMXext
or SSE2. Make sure the test runs only if MMX inline asm is available and
force -cpuflags to all.
Add the required bitexact flag for both tests.
2014-02-05 21:02:39 +01:00
Janne Grunau
04ffd22030 fate: add xvid test for custom matrices
Test sample is made from the sample in Bug-Id: videolan/7411
2014-01-31 11:12:31 +01:00
Martin Storsjö
f8558780bb fate: Explicitly specify the rgb555le pixel format for the mss2 rgb555 tests
This fixes these fate tests on big endian.

Signed-off-by: Martin Storsjö <martin@martin.st>
2014-01-10 18:05:40 +02:00
Vittorio Giovara
11d704dc94 fate: add framepack filter test 2014-01-09 23:13:05 +01:00
Anton Khirnov
a246af86e4 FATE: add MSS2 tests 2014-01-09 09:44:48 +01:00
Anton Khirnov
ca96e33716 vp9: drop support for real (non-emulated) edges
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
2014-01-09 09:43:59 +01:00
Anton Khirnov
ef8c93e2f1 vp8: drop support for real (non-emulated) edges
They are not measurably faster on x86, they might be somewhat faster on
other platforms due to missing emu edge SIMD, but the gain is not large
enough to justify the added complexity.
2014-01-09 09:41:24 +01:00
Guillaume Martres
060667195e hevc: rename some HEVC conformance streams
Some HEVC conformance streams zip on
http://wftp3.itu.int/av-arch/jctvc-site/bitstream_exchange/draft_conformance/
were updated without changing the actual stream. Rename them in FATE
accordingly to make it easier to track future stream updates.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-01-06 08:05:17 +01:00
Guillaume Martres
98c0cd0b99 hevc: add new conformance streams
Also remove superseded conformance streams. The conformance streams all
come from http://wftp3.itu.int/av-arch/jctvc-site/bitstream_exchange/draft_conformance/

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-01-06 08:03:35 +01:00
Alex Converse
9d18a7d3ec fate: Update AAC ELD 5.1 ref for recent bugfixes. 2014-01-04 14:42:38 -08:00
Alex Converse
42d1b41983 fate: Add a test vector for AAC ELD with TNS. 2014-01-04 14:42:38 -08:00
Alex Converse
e2096e2eaa fate: Add a downsampled SBR testvector 2014-01-04 14:42:38 -08:00
Anton Khirnov
b318106fae FATE: add a test for the lavr mixing case fixed in fc6a3ef40d 2014-01-03 16:44:03 +01:00
Anton Khirnov
a8cc88b1a2 tests/Makefile: allow FILTER* to be called with lists of filter names 2014-01-03 16:43:41 +01:00
Martin Storsjö
e121a725c3 fate: Explicitly specify the pixel format for the pngparser test
The RGB32 pixel format is RGBA/BGRA depending on target
endianness - make sure to convert it to one specific format for
the framecrc tests.

This fixes the pngparser fate test on big endian.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-12-18 21:21:41 +02:00
Vittorio Giovara
cfb4ee3097 fate: add a pngparser test 2013-12-17 09:34:08 +01:00
Vittorio Giovara
eddff165b4 fate: add utility function to test parser, demuxer, and decoder 2013-12-17 09:34:08 +01:00
Anton Khirnov
24abd806ea ljpegenc: deMpegEncContextize
The encoder uses almost none of the mpegvideo infrastructure, only some
fields from MpegEncContext.

The FATE results change because now an all-zero quant matrix is written
into the file. Since it is not used for anything for ljpeg, this should
not be a problem.
2013-12-05 13:35:55 +01:00
Anton Khirnov
58a868968d FATE: drop the last partial frame in the wmv8-drm test
This has already been done in eb066a4ce9,
but the number of frames produced from that file changed due to
timestamps changes since then.
2013-12-05 13:27:52 +01:00
Vittorio Giovara
874838dc65 fate: add one select filter test
This test selects alternate frames from input.
2013-11-21 13:01:00 +01:00
Anton Khirnov
952f943d40 FATE: add a jv test 2013-11-16 13:20:06 +01:00
Ronald S. Bultje
72ca830f51 lavc: VP9 decoder
Originally written by Ronald S. Bultje <rsbultje@gmail.com> and
Clément Bœsch <u@pkh.me>

Further contributions by:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-11-15 10:16:28 +01:00
Guillaume Martres
e1c058dba9 FATE: Add HEVC tests
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-10-31 20:20:16 +01:00
Diego Biurrun
9510d7689e fate.sh: Allow non-fast-forwards when updating sources 2013-10-29 14:46:28 +01:00
Paul B Mahol
79ef4b19bf FATE: add bitexact sws flags to the fieldorder test
swscale is called for the 420 to 422 conversion

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-10-27 21:34:28 +01:00
Alex Converse
4e326ec769 fate: aac: Add test for AAC-ELD 2013-10-25 19:41:23 +00:00
Vittorio Giovara
157dc0b489 fate: add fieldorder filter test
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-10-22 10:59:03 +02:00
Diego Biurrun
23e6d3d4e2 fate: vpx: Remove one redundant $(eval) invocation 2013-10-19 15:09:29 +02:00
Martin Storsjö
a27f1116cd fate: Increase the tolerance in the lavr tests
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-10-17 19:09:50 +03:00
Diego Biurrun
f52fd3f3b2 fate: aac: Add test for AAC-LD 2013-10-17 12:36:35 +02:00
James Almer
6b081eff4d fate: add vorbiscomment cover art test
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-10-15 19:48:27 +02:00
Anton Khirnov
68edd5be09 FATE: use proper comparison mode in the lavr tests 2013-10-15 19:11:49 +02:00
Anton Khirnov
dd33637c18 tiny_psnr: switch f32 handling to floating point
Also add support for f64.
2013-10-15 19:10:33 +02:00
Anton Khirnov
364af376f3 FATE: add lavr resampling tests 2013-10-12 15:07:46 +02:00
Anton Khirnov
9ab5f7107d FATE: add lavr mixing tests 2013-10-12 15:07:26 +02:00
Anton Khirnov
93370d1216 mxfdec: set audio timebase to 1/samplerate
Fixes sync in some samples (e.g. bugs 7581 and 8374 in VLC).
Based on a commit by Matthieu Bouron <matthieu.bouron@gmail.com>

Reported-by: Jean-Baptiste Kempf <jb@videolan.org>
CC: libav-stable@libav.org
2013-09-29 21:50:30 +02:00
Diego Biurrun
c58f4069e1 fate.sh: Run git-clone quietly 2013-09-10 12:38:41 +02:00
John Stebbins
f812eeda17 matroskaenc: Fix writing TRACKDEFAULTFLAG
The element was only being written when the value == 1.  But the default
value of this element is 1, so this has no useful effect.  This element
needs to be written when the value == 0.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-08-27 14:00:31 +02:00
John Stebbins
30ce289074 movenc: Make tkhd "enabled" flag QuickTime compatible
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks.  And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-08-23 09:55:42 +02:00
Luca Barbato
aae159a7cc nuv: Do not ignore lzo decompression failures
Update the fate reference since the last broken frame is not decoded
anymore.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
2013-08-13 13:09:22 +02:00
Anton Khirnov
fa09e76010 FATE: add a TAK test 2013-08-08 22:59:42 +02:00
Diego Biurrun
711c4da1af fate: Add tree test 2013-07-29 19:20:28 +02:00
Diego Biurrun
c47037c7a1 fate: Add timefilter test 2013-07-29 19:20:27 +02:00
Diego Biurrun
37063714c0 build: Only check FATE dependencies when running FATE tests
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-07-27 16:50:21 +03:00
Diego Biurrun
03039f4c8c miscellaneous typo fixes 2013-07-25 19:43:32 +02:00
Sean McGovern
52ea298670 fate: use current syntax for the scale filter
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-07-12 11:08:25 +03:00
Diego Biurrun
6516632967 tests: Only run noproxy test if networking is enabled 2013-07-06 15:36:57 +02:00
Anton Khirnov
8ad3267ce3 oggdec: do not fall back on binary search in the generic code.
Binary search is already attempted in the format-specific seek function,
so the fallback is only reached if binary search failed already.
2013-07-02 10:37:22 +02:00
Derek Buitenhuis
b6507930ac fate: Add Canopus Lossless YUY2 test
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2013-06-24 18:26:08 -04:00
Martin Storsjö
d7b9b66abb fate.sh: Allow specifying --as via a specific variable
This simplifies specifying a value containing spaces for this
parameter.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-29 10:37:05 +03:00
Anton Khirnov
01656fd476 matroskaenc: support muxing WavPack 2013-05-28 18:18:57 +02:00
Martin Storsjö
ba13606ca6 fate: Add a --target-samples path parameter
This allows having the samples accessible via different paths
on the target and on the host.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-28 17:16:54 +03:00
Martin Storsjö
4a27a52a1f fate: Don't use files from SRC_PATH in the actual tests
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-28 17:14:18 +03:00
Kostya Shishkov
e9e5a1bdc7 Monkey's Audio old versions FATE tests 2013-05-24 09:04:18 +02:00
Diego Biurrun
c209d0df65 fate.sh: add support for build-only FATE instances
If the "build_only" variable is set in the configuration file, the
FATE client will skip running tests and just compile all targets.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-21 10:07:19 +03:00
Kostya Shishkov
e45d6222cc Escape 130 FATE test 2013-05-19 07:09:36 +02:00
Kostya Shishkov
8e673efc6f prores: update FATE test to account for alpha plane present in the test sample 2013-05-19 07:09:23 +02:00
Michael Niedermayer
0313653928 vc1dec: Update destination pointers in context for fields
This replaces a large number of checks for the second field by
fixing the pointers when they are setup.

This should also fix I/BI field pictures.

Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs.

Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-15 11:38:49 +03:00
Luca Barbato
7cbc4cb442 fate: update the mmf reference
Using Optional Data chunk introduced changes the hash.
2013-05-14 18:50:27 +02:00
Martin Storsjö
5d9d8461fb vc1dec: Don't apply the loop filter on fields
Fixes read of uninitialized memory.

Based on a patch by Michael Niedermayer.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-05-14 14:36:00 +03:00
Diego Biurrun
bd392785a7 fate-run: Drop unnecessary regtest() indirection
The indirection was used to abstract from the different -regression.sh
scripts. Now that only one remains, this indirection is pointless.
2013-05-07 19:27:47 +02:00
Anton Khirnov
cd4bfe3a50 FATE: use a less ambiguous end time for filter-trim-time test
0.1 seconds at 25 fps is exactly 2.5 frames, which may be rounded either
to 2 or 3 on different platforms.
2013-05-07 12:33:13 +02:00
Janne Grunau
851465f9d9 fate-jpeg2000-dcinema: force output to xyz12le
Fixes Fate tests on big-endian configs.
2013-05-06 21:48:15 +02:00
Reinhard Tartler
95e8ac60f8 build: normalize coverage.info
Without this, lcov sometimes misses to normalize paths that contain "/./".
Also, ignore uninteresting hits in system headers.
2013-05-04 09:34:58 +02:00
Reinhard Tartler
768e44d044 build: tune down the output of lcov/gcov
In the default settings, both tools produce a lot of unhelpful noise.
2013-05-04 09:34:58 +02:00
Anton Khirnov
b333f3a22a lavf-regression: use -frames instead of -t for image tests
-t 0.5 is 12.5 frames at 25 fps, which may round to either 12 or 13 on
different platforms.
2013-05-03 08:07:45 +02:00
Anton Khirnov
a83c0da539 avconv: make -t insert trim/atrim filters.
This makes -t sample-accurate for audio and will allow further
simplication in the future.

Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
2013-04-30 11:53:12 +02:00
Anton Khirnov
a1e05b0487 lavfi: add trim and atrim filters. 2013-04-30 11:24:57 +02:00
Anton Khirnov
3d10614529 FATE: add an additional indeo3 test
It is a part of the sample that got broken by recent indeo3 changes.
2013-04-30 11:06:03 +02:00
Diego Biurrun
b963f021b6 fate: Invoke pixfmts lavfi tests through fate-run.sh 2013-04-27 16:53:42 +02:00
Diego Biurrun
28663511c9 fate: Invoke pixdesc lavfi tests through fate-run.sh 2013-04-27 16:53:42 +02:00
Diego Biurrun
03b052c023 fate: Invoke standard lavfi tests through fate-run.sh 2013-04-27 16:53:42 +02:00
Diego Biurrun
7c00e9d8ae x86: ac3dsp: Remove 3dnow version of ff_ac3_extract_exponents
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
2013-04-26 21:06:52 +02:00
Luca Barbato
c2cb01d418 lavf: introduce AVFMT_TS_NEGATIVE
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.

CC:libav-stable@libav.org

Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-04-25 10:13:27 +02:00
Vittorio Giovara
fc18cc44eb fate: add CVFC1_Sony_C to h264 conformance tests
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-04-24 17:44:11 +02:00
Nicolas Bertrand
c81a706381 JPEG 2000 decoder for DCinema
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-04-22 15:38:29 +02:00
Anton Khirnov
9bfc6e02ba afifo: fix request_samples on the last frame in certain cases
The current code can fail to return the last frame if it contains
exactly the requested number of samples.

Fixes the join filter test, which previously did not include the last
408 samples in most cases.

CC:libav-stable@libav.org

Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-04-22 02:29:56 +02:00
Diego Biurrun
bc7fbd36ea fate: cosmetics: More sensible order for entries in video filter file 2013-04-19 18:07:48 +02:00
Diego Biurrun
a77aed142c fate: Rename video filters file and add separate video filters target 2013-04-19 18:07:48 +02:00
Diego Biurrun
b357f1d1d3 fate: Split audio filters into their own separate file 2013-04-19 18:07:48 +02:00
Diego Biurrun
3eec1d41b4 fate: Reuse VREF and AREF variables where appropriate 2013-04-19 18:07:48 +02:00
Martin Storsjö
6add6272da fate: Set the bitexact flag for vp3/vp5/vp6 tests
This is required since there are bit-inexact implementations
of the vp3 idct (for bfin).

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-04-15 14:19:16 +03:00
Vittorio Giovara
25882a7ff6 FATE: add a test for the interlace filter
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-04-11 21:33:58 +02:00
Anton Khirnov
ba8efac977 af_channelmap: switch to an AVOptions-based system. 2013-04-09 19:09:40 +02:00
Reinhard Tartler
a862c7d336 Integrate lcov/gcov into Libav
The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/
2013-04-05 18:55:11 +02:00
Luca Barbato
b01b60a29d fate: add an option to generate the references
Useful to add or update fate tests.
2013-03-29 15:41:26 +01:00
Anton Khirnov
8a2f5f0c63 FATE: add a test for the join filter 2013-03-28 08:03:43 +01:00
Anton Khirnov
9e9cd98aed FATE: add a test for the volume filter 2013-03-28 08:03:31 +01:00
Anton Khirnov
43a8333a16 FATE: add a test for the channelsplit filter 2013-03-28 08:03:12 +01:00
Anton Khirnov
33942b7bde FATE: add a test for the channelmap filter 2013-03-28 08:02:55 +01:00
Anton Khirnov
f917420378 FATE: add a test for the negate filter 2013-03-28 08:02:47 +01:00
Anton Khirnov
3d8c80b611 FATE: add a test for the overlay filter 2013-03-28 08:01:58 +01:00
Anton Khirnov
ea290d919a FATE: add a test for the setpts filter 2013-03-28 08:01:46 +01:00
Anton Khirnov
71f3ede24e FATE: add a test for the hqdn3d filter 2013-03-28 08:01:41 +01:00
Anton Khirnov
0bdbd85e47 FATE: add a test for the transpose filter 2013-03-28 08:01:34 +01:00
Anton Khirnov
ad85e8d9a5 FATE: add a test for the unsharp filter 2013-03-28 08:01:26 +01:00
Anton Khirnov
1a6d4bd7b6 FATE: add a test for the fade filter 2013-03-28 08:01:13 +01:00
Anton Khirnov
feb4922b25 FATE: add a test for the drawbox filter 2013-03-28 08:01:07 +01:00
Anton Khirnov
a222997650 FATE: add a test for the boxblur filter 2013-03-28 08:00:58 +01:00
Anton Khirnov
7cec12748a FATE: add a test for the gradfun filter 2013-03-28 08:00:24 +01:00
Diego Biurrun
f2a59722d1 fate: filter: Add dependencies
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-03-28 07:58:44 +01:00
Janne Grunau
535c247b57 fate: use little endian yuv444p10 in h264-reinit tests
Fixes fate big endian configs.
2013-03-23 13:12:36 +01:00
Janne Grunau
3f15b301fa fate: add test for cropping h264 to container dimensions
Tests the workaround added for 1080 videos created with Canon cameras
in 30f515091c.
2013-03-22 21:58:01 +01:00
Anton Khirnov
93eaeb0244 FATE: add a tscc2 test. 2013-03-22 20:10:56 +01:00
Janne Grunau
1c4073efd2 fate: add tests for h264 decoder reinit 2013-03-20 16:04:27 +01:00
Anton Khirnov
64bfc3e205 FATE: replace -vb with -b:v
The -{vas}<option> syntax is now obsolete and deprecated, and has never
been documented or encouraged.
2013-03-08 14:14:17 +01:00
Anton Khirnov
6deae8e053 FATE: remove the -dct option from some decoding tests.
It is an encoding option, it has no effect when applied to decoding.
2013-03-08 14:14:05 +01:00
Anton Khirnov
bde48aa92d FATE: enable multiple slices in the ffv1 vsynth test
This allows us to test the slice threading code.
2013-03-08 08:10:52 +01:00
Ronald S. Bultje
65f1d45dcc lavu: add support for atomic operations.
These could be used for reference counting, or for keeping track of
decoding progress in references in multithreaded decoders.

Support is provided by gcc/msvc/suncc intrinsics, with a fallback using
pthread mutexes.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-03-08 07:32:36 +01:00
Janne Grunau
15ea1ac695 fate: remove last incomplete frame from mpeg2-field-enc test 2013-03-04 11:22:21 +01:00
Martin Storsjö
5c8696555a lavf: Add a fate test for the noproxy pattern matching
Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-27 21:32:14 +02:00
Anton Khirnov
64ed397635 vf_yadif: fix out-of line reads
Some changes in the border pixels, visually indistinguishable.
2013-02-15 16:08:33 +01:00
Martin Storsjö
d192ac3e03 swscale: Disallow conversion to GBRP16
This reverts parts of d6d5ef5534, that didn't work right. (The
tests that were added failed on big endian, and the output looked
garbled on little endian as well.)

This is due to the fact that the intermediate scaling values (from
e.g. hScale8To19_c or hScale16To19_c) are stored as int32_t and
thus requires a separate output function, while yuv2gbrp_full_X_c
only interprets it as int16_t.

Signed-off-by: Martin Storsjö <martin@martin.st>
2013-02-11 20:03:16 +02:00
Michael Niedermayer
d6d5ef5534 sws: GBRP9, GBRP10, and GBRP16 output support
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
2013-02-09 14:31:11 -05:00
Anton Khirnov
81726a4f0b FATE: add tests for additional flavors of asf cover art 2013-02-09 18:57:21 +01:00
Anton Khirnov
293065bdb5 mpegvideo: initialize dummy reference frames.
Do not rely on get_buffer initializing them.

Changes yadif tests (off by one in one border pixel), because yadif
reads from those uninitialized lines.
2013-02-06 10:21:52 +01:00
Anton Khirnov
dff6197dfb nuv: do not rely on get_buffer() initializing the frame. 2013-02-06 10:21:52 +01:00