* [corlib] Capture the ExceptionDispatchInfo when rethrowing from TaskContinuation
In `task.GetAwaiter().OnCompleted(action)` if `action` throws, the
`TaskContinuation.RunOrScheduleAction method will catch the exception and then
call `RuntimeAugments.ReportUnhandledException`. We must not simply throw the
exception again - in that case we will lose all the frames leading up to the
`catch` in `RunOrScheduleAction`. Instead use ExceptionDispatchInfo to
caputure the original throw.
Addresses https://github.com/mono/mono/issues/19166
* [test] Add regression test
For annoying reasons we can't run this as a simple NUnit test because the
exception is unhandled on some arbitrary threadpool worker thread, and those
don't show up within an NUnit setup.
Additionally because the unhandled exception in the root domain would normally
terminate the application, we need to run this in a new appdomain.
Co-authored-by: Aleksey Kliger <[email protected]>
[2019-10] [merp] Capture Environment.FailFast message in crash report
If the process calls `System.Environment.FailFast (message, exception)` we should capture the message in the crash report log.
Backport of #18920 (which is a handwritten backport of #18863)
/cc @lambdageek @monojenkins
* Make MonoWebRequestHandler linker friendly
* Make MonoWebRequestHandler's ctor public (to be able to use in Activator.CreateInstance without binding flags)
* Update HttpClientHandler.SocketsHandler.Android.cs
* Update HttpClient.android.cs
Co-authored-by: Egor Bogatov <[email protected]>
Backporting this since we see errors during `pip install` on the Android Mono SDKs build on Linux and with this we're removing the call to pip (it wasn't needed).
Backport of #18783.
* [2019-10] Bump msbuild to track mono-2019-10
* Bump roslyn to 3.5.0-beta3-20111-03 .
* Update nuget.exe to match xbuild
- the closest version available right now, to `5.5.0-rtm.6422` is
`5.5.0-preview2`, so using that for now.
Use of `access_token` is now deprecated, switching to HTTP header
```
Please use the Authorization HTTP header instead, as using the `access_token` query parameter is deprecated.
```
(cherry picked from commit 2f74ab393f)
This causes an additional dependency of mono on libintl which we didn't have before.
Reported by a user on gitter, it's problematic on macOS since it makes the mono binary depend on the libintl we ship in the Mono .pkg.
It was introduced in Mono 6.6 by https://github.com/mono/mono/commit/18e0ebfe89be0a175d2f904b9bb1ec6816daa318
Co-authored-by: Alexander Köplinger <[email protected]>
* If a thread was suspended and doesn't have any managed stack, it was considered as terminated, but it wasn't really terminated because it can execute managed code again, and stop in a breakpoint so if the execution arrives in debugger_agent_breakpoint_from_context we reset the flag terminated to FALSE.
* Adding terminated = FALSE in single_step_from_context.
Co-authored-by: Thays Grazia <[email protected]>
* Add SignedCms to the typeforwards in the System.Security.Cryptography.Pkcs facade
* Added additional missing types from System.Security.Cryptography.Pkcs.
* It would be nice if the files I added had namespaces ;-)
* [csproj] Update project files
* Bump API snapshot submodule
* [metadata] Size 0 Blob heap is ok when resolving assembly refs
Sometimes ILasm can produce images with a Blob heap of size 0. In cases where
we're loading assembly references from such an image, the hash (which is
optional) can be at index = 0 and the Blob heap size is also 0.
Also: add the hash value to the output of `monodis --assemblyref`
* [metadata] Add a separate assertion for the index == size == 0 case
And a comment explaining how it is likely to be triggered. If the assembly is
reasonable the caller of mono_metadata_blob_heap should be updated to use
mono_metadata_blob_heap_null_ok instead
* [bcl] Allow Mono's ILASM to produce a size 0 Blob heap
ECMA 335 II.24.2.4 says that the user string and blob heaps should have an
entry at index 0 consisting of the single byte 0. However .NET Framework (and
.NET Core) ilasm will entirely omit the Blob heap (that is, create a blob heap
entry of size 0) if it is not needed. This PR changes Mono's ILASM to emit the
initial byte on demand only if one of the MetaDataStream.Add() methods is
called. Otherwise we will also emit a stream of size 0.
This is needed to compile some test cases.
* [tests] Add regression test for loading assemblies with size 0 Blob heap
Depends on ILASM that can emit a size 0 Blob heap
Also when iterating over the runtimes, actually look at the current element,
not the first element.
Also mention the unsupported runtime version in the warning message when it is
passed to mono_init_internal.
Fixes https://github.com/mono/mono/issues/17916
They cannot deal with large test assemblies so we need to split them.
We're doing this by introducing a new `#skip <PROFILE>` directive in the .sources format which defines where to split the assembly.
The logic is very simple: files up until the first `#skip` are common files which get included in each part, subsequent files are only in the respective part assembly.
Fixes https://github.com/mono/mono/issues/18213
(cherry picked from commit 3891fe97d2)
(cherry picked from commit a74416d950)
* [cominterop][test] Calling QueryInterface from an unattached thread asserts
If we pass a managed COM object to native code and the native code calls one of
the IUnknown methods, we assert because the thread is not attached but we want
to enter GC Unsafe mode.
* [cominterop] Attach to runtime from IUnkown and IDispatch methods
If the COM objects for a managed object is passed to a thread that hasn't
interacted with Mono before, we need to attach before doing GC thread state
transitions.
Addresses https://github.com/mono/mono/issues/18137
* [test] Call managed method through COM wrapper from unattached thread
This works, but I don't think we had a test previously. Call a managed method
via a COM interface from a thread that is not attached to the runtime, to
ensure that it is attached.
[2019-10] [mini] Fix delegate trampoline virtual call via delgate Invoke
If we need to jit the Invoke method of a delegate, we get `tramp_info` with a
NULL method.
Background: normally when we create a delegate around a virtual method,
`handle_delegate_ctor` will just create a virtual invoke trampoline with
`mono_arch_get_delegate_virtual_invoke_impl` which doesn't get here. But if
we're asked to compile the delegate's `Invoke` method, then `compile_special ()`
will create a `tramp_info` with a null method, and return a delegate trampoline.
That's the case here - we had
```
var del = SomeDelegate(obj.VirtualMethod);
var invoke_method = del.GetType().GetMethod ("Invoke");
invoke_method.Invoke (del, args);
```
or
```
var del = SomeDelegate(obj.VirtualMethod);
var another_del = OtherDelegate (del.Invoke);
another_del (args);
```
in both cases, we end up in mono_delegate_trampoline with `tramp_info->method == NULL`.
in the second case the IL is like this:
```
newobj instance void Derived::'.ctor'
ldvirtftn instance void class Base::VirtualMethod()
newobj instance void class SomeDelegate::'.ctor'(object, native int)
```
So `delegate->target` is a derived instance but `delegate->method` is some base
class method.
Addresses https://github.com/mono/mono/issues/17718
Backport of #18073.
/cc @lambdageek
* [2019-10] Bump msbuild+roslyn to track mono-2019-10
- bumps roslyn to `3.5.0-beta1-19606-04`
* roslyn: Delete reference to the now removed Microsoft.Managed.EditorConfig.targets
* [utils] Add back mono_threads_attach_tools_thread
In https://github.com/mono/mono/commit/a5da7b21f4b6dbc5eaa09c2addee91b84dc1dbd5
we got rid of "tools" threads internally to the runtime.
However since the API was previously marked with MONO_API it was an internal
API that some embedders depended on.
This PR adds back an (external-only) limited form of tools thread.
The runtime is aware of the Tools thread in that FOREACH_THREAD_* macros will
iterate over them, and the thread has a coop thread state machine. (That is,
mono_thread_info_current() and GC Safe and GC Unsafe transitions all work.)
However the thread is:
1. Not stopped by the GC
2. Is not interrupted by profiler sampling.
3. Does not have a "current domain"
4. (As a consequence of the above) cannot call managed methods or touch managed
objects.
Such threads are useful for low-level interaction with the runtime such as
querying metadata, the JIT state and other coordination.
mono_threads_attach_tools_thread should be called no more than once. It should
not be called on a thread that is already attached with mono_thread_atach, and
vice versa.
Addresses https://github.com/mono/mono/issues/18011
* [threads] Make mono_threads_attach_tools_thread into a public API
This allows us to workaround issues we currently have in the macOS bot network where DNS lookup of the hostname fails.
(cherry picked from commit 269d509e42)
Allocation of thread objects usese the mono_object_new_mature API. These objects are allocated before the thread is finished attaching to the runtime. This means that a collection can happen on an unattached thread as well as all its callbacks, which is a counter-intuitive behavior.
On android this is problematic because at the end of the SGen collection we need to call the java collection, which needs to have the thread attached. This could probably be fixed instead from the Xamarin.Android side, but this approach seems simpler and saner.
Fixes https://github.com/mono/mono/issues/17878
[2019-10] [threadpool] Decrement max_working when worker times out
The corresponding code in CoreCLR:
https://github.com/dotnet/runtime/blob/bf88f146412d1e2d41779422337184a802f186c9/src/coreclr/src/vm/win32threadpool.cpp#L2156-L2164
The issue is that counter._.max_working is only ever changed by:
1. the monitor_thread when it detects starvation (increment by 1).
2. the hill climbing algorithm (increment or decrement).
Creating a periodic load of creating many workers at once followed by a minute
or more of quiescence increases the variable worker.counters._.max_working in
monitor_thread(). Once that counter matches worker.limit_worker_max,
monitor_thread() keeps looping without unparking or creating a thread, even
though the actual number of threads/workers is small. If the existing threads
are all waiting on work that needs a new thread, then a deadlock occurs.
With this change, when a parked worker times out, it will lower max_working to
the number of active (working + parked + starting) threads minus itself (but no
less than limit_worker_min). As a result, monitor_thread will only increment
max_working as long as none of the already running workers are timing out.
Attempt to address https://github.com/mono/mono/issues/17833
---
Also allow monitor_thread to start workers if there aren't enough active, even if the max worker limit has been reached.
Work around a pathological condition where the work_item_count is non-zero, and
the max_working limit has been reached, but the number of active threads is
still below the max. In that case, unpark some workers and start some new
threads.
May address http://work.azdo.io/827206
Backport of #17927.
/cc @lambdageek
[2019-10] [arm] if mtriple is provided, do not set -march
E.g. when passing `-march=arm -mtriple=armv7s-ios`, `-march` will win and thus ignore `armv7s`.
Fixes https://github.com/mono/mono/issues/17931
* Caused by 5e318afd2e
* Related with 4cd5068230
* Almost fixed by e431093f73
Hopefully we are done with it.
Backport of #17937.
/cc @lewurm
* [runtime] Treat calling a non-virtual method through an open delegate the same as the normal case instead of the OPEN_VIRTUAL case.
* [amd64] Fix the return value mapping in gsharedvt calls, the return address might be in different registers in the caller and callee.
* [runtime] Always initialize del->method_ptr even if interp_method is set, JITted code makes calls through it in mixed mode.
* Add a test for open delegates and gsharedvt.
* Increase nrgctx trampoline count, its needed by dynamic-method-churn.exe in full-aot-interp mode.
Mono SDB's debugger agent takes a `host:port` parameter to specify the host and
port on which to listen for debugger connection. `host` is passed, via
`mono_get_address_info`, to the `getaddrinfo(3)` standard library call which
does the job of translating the name to the IP address. However, there's no
special treatment for situations when `host` is already an IP address. In this
case `getaddrinfo` takes a lot of time to perform at least two DNS lookups (if
there's just a single DNS server configured) which will time out as the IP
address in `host` will not be resolved by any of the servers.
`getaddrinfo` takes a "hints" parameter where caller can specify some
information about the `host:port` pair to make the lookup faster/easier.
However, Mono doesn't specify the address family in the `hints` parameter, thus
forcing the slow path of DNS lookups on `getaddrinfo`.
This commit adds a new hint named `MONO_HINT_NUMERIC_HOST` (which maps to
`AI_NUMERICHOST` for `getaddrinfo`) which will allow, if set, `getaddrinfo` to
take a faster route in address discovery. Debugger agent will, in most cases,
get an IP address to instead of host name so we call `mono_get_address_info` up
to 3 times (IPv4, IPv6 and unspecified) in order to make the lookup faster.
Backport of #17898.
[2019-10] [debugger-agent] Fix CMD_VM_ALL_THREADS returning wrong value due to uninitialized variable
`remove_gc_finalizing` wasn't initialized so its value is undefined.
The `count_thread_check_gc_finalizer()` function only sets it in some cases so we could end up with the variable having an undefined (and probably not 0) value.
This resulted in the returned thread count from the debuggee being wrong because we'd decrement `count` even though we shouldn't.
Fixes regression from https://github.com/mono/mono/pull/15618
Thanks to @lewurm for helping me with this!
Backport of #17847.
/cc @akoeplinger
* Adding unit-test of mono embedded
* Fix c++ build.
* Fix c++ build.
* Fix c++ build.
* Fix copy paster error.
* Changing to use the sample that is in samples/embeded as a unit test.
* Adding test-invoke from sample to unit-tests. Discovered an issue and fixed when calling mono_runtime_object_init.
* adding test file
* Fixing Formatting Changing makefile
* Adding -static flag to make sure that we are using the right version of mono.
* Adding -static flag to make sure that we are using the right version of mono.
* Adding -static flag to make sure that we are using the right version of mono.
* Fix coop suspend.
* Fix coop suspend.
* Removing static, this wasn't the problem.
* Update samples/embed/test.cs
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Update samples/embed/teste.c
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Update samples/embed/teste.c
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Update samples/embed/test-invoke.c
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Update samples/embed/test-invoke.c
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Using tabs
* When we try to call a method to get the async_id to do an async debug and we are trying to do this in a generic method like this:
async Task<T> ExecuteAsync_Broken<T>()
{
await Task.Delay(2);
return default;
}
We need to inflate the generic type before call the method or we will get the error: Could not execute the method because the containing type 'System.Runtime.CompilerServices.AsyncTaskMethodBuilder1[T_REF]’, is not fully instantiated.
Fixes#17549Fixes#17569
* Do not use reserved word "class
* adding unit test
* Update mono/mini/debugger-agent.c
Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>
* Adding mono prefix.
* Moving mono_get_generic_context_from_stack_frame to debugger-engine because debugger-agent is not used on wasm, causing a compilation error.
* Moving mono_get_generic_context_from_stack_frame back to mini-exception and the declaration is in mini.h
* [profiler] Add test case for pinvokes and reverse pinvokes
* [profiler] Fix crash in native to managed wrappers
When we call back to managed from a pinvoke, we're in GC Safe mode and the
profiler instrumentation is inserted in the wrapper before it does the
transition to GC Unsafe. So we need an extra transition before the profiler
calls its locking functions
Fixes https://github.com/mono/mono/issues/17687
* [coop] Mark internal GC Unsafe functions with MONO_PROFILER_API
Allow the profiler to transition to GC Unsafe mode
* [profiler] ptestrunner.pl fix profiler modules directory
* [runtime] Make mono_thread_manage external only
runtime should use mono_thread_manage_internal
* [runtime] Do an unbalanced GC Unsafe transition in mono_jit_cleanup
After mini_cleanup, we don't have GC thread states anymore because all that
stuff was cleaned up, so MONO_EXIT_GC_UNSAFE would assert
* [runtime] Mark mono_runtime_quit external only.
Runtime should use mono_runtime_quit_internal.
After we call the quit_function (aka mini_cleanup) we don't have any GC thread
states anymore because all that stuff got cleaned up. So MONO_EXIT_GC_UNSAFE
can't work.
* [merp] Introduce a new 'dump mode' that allows different signal behavior when dumping
The primary reason for this is gaining the ability to interpret SIGTERM properly as a crashing signal when outside of 'dump mode', and as a utility signal during the 'thread summarizer' dumping process.
* Cleaning up SslStream, MobileAuthenticatedStream and TaskToApm.
### Overview
After the removal of the Legacy TLS Provider, we can make some cleanups and
improvements to the `SslStream` class. Since both the remaining providers
use the internal `MobileAuthenticatedStream` and support Task-async code,
we can get rid of some of the Begin/End async logic and the the underlying
`Stream` class handle it instead.
This also fixes a nasty issue with some of those task objects leaking
unobserved exceptions. The problem was that `SslStream.Dispose()` needs to
clear out all resources, but in doing so also nulls out the `Impl` handle to
the `MobileAuthenticatedStream` - so a subsequent `End*()` call will not
reach it's corresponding `TaskToApm.End()` method.
There are also some cleanups in the internal APIs that were only ever used
internally and not intended for public consumption.
### Mono.Security.dll
* `Mono.Security.Interface`: removed internal `ICertificateValidator2` interface.
* `Mono.Security.Interface.IMonoSslStream`: this internal interface is only used
by the web-tests, which only use it as a way to get the `SslStream` instance,
so all those `Begin/End` async methods are now gone.
* `Mono.Security.Interface.IMonoSslStream2`: removed another internal interface.
* `Mono.Security.Interface.MonoTlsProvider`: removed some `internal abstract`
methods; these have been moved into a new `Mono.Net.Security.MobileTlsProvider`
inside `System.dll`.
### System.dll
* `Mono.Net.Security.MobileTlsProvider`:
New abstract internal base class, which received the aforementioned abstract
internal methods. The naming is such to make it consistent with the already
existing `MobileTlsContext` and `MobileAuthenticatedStream`.
Since both `AppleTlsProvider` and `BtlsProvider` now have an abstract internal
base class inside `System.dll`, they can use the `ChainValidationHelper` class
directly and we can also avoid some `Mono.Security` dances like for instance
that `MonoSslPolicyErrors` enum.
This will also help make the code easier to read and maintainer.
* `Mono.AppleTls.AppleTlsProvider` and `Mono.Btls.MonoBtlsProvider`: change base
class into `MobileTlsProvider` and reflect above mentioned overload changes.
* `Mono.AppleTls.AppleCertificateHelper`: use `ChainValidationHelper` as well.
* `Mono.Net.Security.ChainValidationHelper`: only implement `ICertificateValidator`.
The `ICertificateValidator` interface is still required because it is in use by
the web-tests, but the previous `ICertificateValidator2` was an internal dance.
* `Mono.Net.Security.MobileAuthenticatedStream`: largely cleaned up this class.
- we now implement the current slimmer version of `IMonoSslStream`.
- moved all those overloads into `SslStream` that only fill in default values for
some of their arguments and then call another overloaded version of their own.
- removed lots of `Begin/End` methods that are not used anymore.
* `Mono.Net.Security.MonoTlsProviderFactory`: use `MobileTlsStream` everywhere.
* `Mono.Net.Security.MonoTlsStream`: cleanup `SslStream` creation logic; instead
of going throw `provider.CreateSslStream()`, we can now use an internal constructor
directly, thus avoiding the `IMonoSslStream` interface while also making the code
a lot easier to read and understand.
* `System.Net.Mail.SmtpClient`: same here.
* `System.Net.HttpWebRequest`: use `MobileTlsProvider`.
* `System.Net.Security.SslStream`: largely cleaned up this class.
- we now use `MobileAuthenticatedStream` directly instead of the `IMonoSslStream`
interface and therefore could also get rid of `IMonoSslStream2`.
- cleanup constructor logic to allow the internal constructor being used with a
`MobileTlsProvider` instead of going through `provider.CreateSslStream()`.
- all those overloads that are only filling in default values for some of their
arguments before calling another overloaded version of their own now live here
instead of in the `MobileAuthenticatedStream` class. The reason is to simply that
`MobileAuthenticatedStream` is already quite a complex and difficult class, and
removing some of that complexity out of it will make it easier to understand.
- handle the `TaskToApm.Begin()` / `TaskToApm.End()` here to ensure that we are not
leaking any task objects with unobserved exceptions.
- removed `BeginRead()` and `BeginWrite()` overloads to let the underlying `Stream`
class handle these.
* [csproj] Update project files
* Bump api-snapshot
* [test] GetCustomAttributes on generic type definition
* [reflection] mono_method_get_base_method on a GTD should use canonical ginst
The issue is in how we pass along the generic instantiation. So there are two
parts here: we start with a method on a GTD which has to decompose into the GTD
and it's instantiation with its own generic parameters, and then we go up to
its parent and grandparent inflating and decomposing the resulting
instantiation. The instantiations keep passing the last parameter as the number
of parameters shrinks so that the gparam index from the original type is now
out of bounds for the parent and grandparent. If we mess up, we'll get a
BadImageFormatException from the runtime
Fixes https://github.com/mono/mono/issues/17278
* Removing all fixes to fix#15203 and #17083, and trying a new approach to fix this #17084, together.
The thing is when we are executing on hybrid suspend the caller is executed inside try catch in the runtime_invoke_ method that is generated. And this try catch should be ignored for the debugger exception, otherwise it's the last try catch in main thread, but should always be considered to generate the stack trace.
Fixes#17084
* This test check the case that we were missing. On preemptive this test always runs perfectly, on Hybrid, never run well until this PR.
* Changing how call unit test. Changing variable name.
* [bcl][jit] implement Interlocked.Exchange<T> in terms of object
Exchange<T> is supposed to be picked up as an intrinsic. But if it isn't,
since T has a class constraint, call the `Exchange (ref object, ref object, ref
object)` overload instead.
This works around a limitation in the JIT:
https://github.com/mono/mono/blob/82a07273c22b996b08fa88ee2e6632d782ac2242/mono/mini/mini-trampolines.c#L704-L713
if we're in the common call trampoline, and the caller is generic method and
the callee is a generic method, if we're using generic sharing for the caller,
but there's no generic jit info for the callee, we will not patch the call
site.
In this case we had Exchange<T> calling Exchange_T<T>
where the callee is an icall (and evidently didn't have generic jit info).
So every time we called Exchange<T>, we would go through the trampoline when
trying to call Exchange_T<T> without patching the call site.
Addresses part of https://github.com/mono/mono/issues/17334
* Bump mono corlib version
* Also drop CompareExchange_T<T>
* Sprinkle some Unsafe magic.
Mark the non-icall methods that we expect the JIT to treet as intrinsics with [Intrinsic]
* aot-runtime doesn't need Volatile.Read<T>/Write<T> code
Both of those methods are implemented as calls to the object overload of Volatile.Read/Write
* fix netcore build
* one more IntrinsicAttribute
* [bcl] Remove CompareExchange_T
In https://github.com/mono/mono/pull/17341 we change the caller of
CompareExchange_T<T>(ref T, ...) to call CompareExchange (ref object, ...), but
didn't delete the declaration.
It's already deleted in unmanaged and in the netcore version of this file.
* [bcl] Add null reference checks to Interlocked.Exchange<T>
and Interlocked.CompareExchange<T>
This is to mimic the old behavior in unmanaged when the intrinsic cannot be
used.
The issue was detected via the coreclr acceptance test:
https://github.com/mono/coreclr/blob/mono/tests/src/baseservices/threading/interlocked/exchange/exchangetneg.il
* and netcore
* Another Mono corlib version bump
* [jit] Avoid running mono_handle_native_crash () on the altstack, it can't produce a backtrace. AMD64 only for now.
* Fix checks so stack overflows work again.
If we have coverage profiling enabled for a method (mono_profiler_coverage_instrumentation_enabled, with coverage_filter callback), then we should be able to allocate a coverage info structure (mono_profiler_coverage_alloc). After https://github.com/mono/mono/commit/52429673dc617fd437518757c04c7448211075e9, coverage_filter was reporting wrapper methods as ok to profile, while mono_profiler_coverage_alloc was refusing to allocate the necessary structure, leading to crashes.
Backport of #17396.
* Remove the Legacy TLS Provider.
* `MonoTlsProviderFactory` now treats "legacy" as an alias for "default".
* `Mono.Net.Security/LegacySslStream`: Removed. This class also wasn't using the
`MobileAuthenticatedStream` base class, thus preventing cleanups simplifications
in that area.
* `Mono.Net.Security/LegacyTlsProvider`: Removed.
* `Mono.Security/Mono.Security.Protocol.Tls*`: Removed all the old legacy code.
* `Mono.Security.Interface.MonoTlsProviderFactory`: Bump internal version to 4.
* [csproj] Update project files
* Bump API snapshot submodule
* Fix GSS on Linux
* fix build
* use gssapi_krb5
* enable on linux
* [csproj] Update project files
* enabled GSS for monodroid
* [csproj] Update project files
* [corlib] Mark YieldAwaitable struct readonly
Make it consistent with .NET Standard/Core which makes future API Compat runs report one less difference.
* Bump API snapshot submodule
* Fix SafeHandle marshalling in ref/in/out parameters
* Reorder code to make it exception safe, update comments
* Revert the code reordering because it breaks the invariant that new handle returned from native code should always create new SafeHandle on the managed side
* Fix test_0_safehandle_ref test. The test was expecting incorrect behavior, verified on .NET Core 3 and .NET Framework 4.8.
* Address PR feedback
* Fix cut & paste error
* Fix build
* Really fix the test_0_safehandle_ref tests
* Add more tests for SafeHandle marshalling
* Add exclusion for broken CoreFX test
In https://github.com/mono/mono/commit/fd424c5dd07b2dbbd4aafbf9165a42166d789438 we switched over to the `TextWriter.cs`/`StreamWriter.cs` implementation of corefx. One subtle difference is that an override for `WriteLine(string)` in `StreamWriter` was introduced:
https://github.com/mono/corefx/blob/8e3b279377d1f01d2d089f24548e33855bf6502e/src/Common/src/CoreLib/System/IO/StreamWriter.cs#L526-L531
Previously the definition in `TextWriter` was used, which would call the base case `Write(char[])`. The new override however won't call the base implementation at all, but directly uses the `Span`-variant.
This is a problem for our `CStreamWriter` implementation, since `WriteLine(string)` won't end up in the special handling for `Write(char[])`, which accounts for terminal cursor changes.
This is the real fix for https://github.com/mono/mono/issues/16701
This also reverts commit 68f5613422. ("[TermInfoDriver] update top/left value on Console.{CursorTop,CursorLeft} access (#16745)")
While it kind of masked the issue, it also posed a performance issue on some terminals (e.g. GNOME Terminal).
* Update parameters in MERP WerReportMetadata xml
To enable backend analysis, we need to update our parameters to match our back end event type, which is MonoAppCrash.
It doesn't make sense to me that the previous implementation constructed the XML here in Mono, but depended on the user (VSMac in this case) to add the "correct" event type. The parameters in the XML, must match exactly what is expected for the given EventType, and so we should ensure they are always in-sync by defining them here. Thus, I removed the usage of `eventType` in `mono_merp_enable` and hard coded the expected eventType.
* [merp] Don't pass eventType from managed
The eventType must me MONO_MERP_EVENT_TYPE_STR ("MonoAppCrash") - the backend
determines the format of the other fields based on the event type, so it
doesn't make sense to pass other values from managed since the runtime controls
the other fields.
For compatability Mono.Runtime.EnableMicrosoftTelemetry will still take a
string parameter (now called "unused" instead of "eventType_str") but it will
not pass it down to the internal call.
* Bump corlib version
* [merp] Revert paramerters in WerReportMetadata.xml
Still need event type to be `MonoAppCrash` but the parameters will be the same as before.
Previously it was installed by EnableMicrosoftTelemetry, which is too early.
Now we get here without a handler installed even when mono_merp_enabled returns true.
install_state_summarizer installs a SIGTERM handler. Unfortunately
sigterm_signal_handler assumes that it will only be called when a crash is
already in progress (it assumes it won't be the supervisor, and so it doesn't
setup the memory for capturing a crash report among other things).
* [merp] Print missing status marker file for stage 1 (setup)
* Zeroing is not necessary, snprintf() always null-terminates in this case
* Remove unused variable
* [System.Net.Http] Make HttpClientHandler on WatchOS always fallback
to platform handler. This simplifies HttpClientHandler in shared libraries
and the "default" socket handler would always throw PNSE anyway
* [csproj] Update project files
When doing memory copy dest is the destination address and src is the source address. If we are copying a single reference, we need to emit a write barrier and pass to the write barrier the value, not the pointer where the value is stored.
* Bump version to 6.8
* Add missing new linker source file
(cherry picked from commit a4e531d1f86fe0ff8a18764f30d97610cc2e1eb3)
* [csproj] Update project files
* No monolinker on MCS mode, new linker version needs Roslyn
(cherry picked from commit 6539e12e4050fc68d5aa11fdb4edfa582bb1d11e)
[2019-10] [IO] Remove read-only logic in mono_w32_get_disk_free_space
Fixes#17151
This brings us in line with GetDiskFreeSpaceExW on Windows as well as .NET Core.
I checked with the Android folks and it seems like this won't fail their test - all they check is that the returned value isn't `long.MaxValue`.
Backport of #17177.
/cc @akoeplinger @CoffeeFlux
* If there is a perform_wait_callback in the stack there will be another catch generated by the owner thread, so we don't need to throw, we can continue and find the next catch.
Fixes#17083
* Reverting unit test changed on commit 405d521.
* Fixing assert when calling mono_jit_info_get_method if it was a trampoline.
* [offfsets-tool] Embed a copy of the clang bindings, the version in PIP doesn't work with newer clang versions.
* [wasm] Bump emscripten version to 1.38.47.
* Optimize and extend System.Array intrinsic identification.
i.e. do the strcmp last.
Add GetRawArrayData.
* Use [Intrinsic] attribute instead of comment.
* [mixed] Add interp entry wrappers for devirtualized calls as well.
* [aot] Generate code for string:memcpy/memset/bzero even in profile mode, they are called by the generated code.
* [aot] Treat string:memcpy as always AOTed in mono_aot_can_enter_interp () as well.
* [aot] Always aot string ctors as well, the JIT doesn't generate interp entry code for them.
* [wasm] Update print-table.py.
Followup work for https://github.com/mono/mono/pull/17090
In order to get managed method info for unmanaged stacktraces, we call
mini_jit_info_table_find_ext which calls decode_exception_debug_info which may
allocate if it's not in async context.
Do the switch in mono_threads_summarize_execute so that non-supervising threads
all switch when they run the sigterm_signal_handler. mono_threads_summarize
already does it for the supervisor thread.
Fixes https://github.com/mono/mono/issues/17180
* Fix stackalloc reuse bug in Environment.UserDomainName
According to the comment, this code is never expected to be used (so it should either be deleted or the comment fixed), but in the meantime, if it were to be executed, things could go badly due to potentially passing the same buffer into LookupAccountNameW for two different arguments.
* Fix existing ValueStringBuilder usage to dispose the builder
Signed-off-by: dotnet-bot <[email protected]>
* Make relevant types static (mostly Interop)
* Fix a few stray semicolons
* Remove unnecessary locals
Some can be removed entirely, some can be replaced by discards.
* Remove unnecessary usings
* Move Unix-specific helper method to TimeZoneInfo.Unix.cs
* Remove duplicated code
* Remove duplicative checks
* Remove [ThreadStatic] initialization
These are all the default values and wouldn't be necessary for any static, but inline initialization for [ThreadStatic]s is particularly unuseful (and in non-default cases problematic) because the fields are only set to these values on the initializing thread.
* Fix methods whose return value is never used
* Use string.IsNullOrEmpty
* Remove unnecessary field initialization
All ctors overwrite these values.
* Address PR feedback
Signed-off-by: dotnet-bot <[email protected]>
* [aprofutil] Add skip regexes to simplify expression of removal matching
* [aprofutil] arguments to skip and take by count for automatic profile testing
* [interp] Refactor tracking of stack/local values
Previously we had just an InterpInst* inside StackContentInfo, which was representing the instruction that pushed a certain local/value on the stack. This makes many things awkward, since an instruction is logically different from a value, that a local or a stack slot have. If we clear an instruction, it doesn't necessarily mean that the value that the instruction produced can't be stored on stack or in a local.
This commit creates a new structure StackValue, which holds the value.
* [interp] Generalize contents of StackValue
StackValue contains an opcode and some data to enable reconstruction of the value. For example instead of doing a LDLOC for a local, we can see if the local has a known value and use it instead (this could be a LDLOC from another local, whose value was propagated, or in the future a LDC). This will make more sense when we also start to track constant values.
Also decouple MOVLOC instructions from the cprop pass. They serve no purpose there. They are useful though when we do deadce, since we currently don't know how to kill instructions that change the stack.
* [interp] Handle dup opcode during copy propagation
* [interp] Avoid losing track of stack values for some opcodes
For some opcodes, that access stack values below the top of the stack, we were assuming they pop everything and then push the stack back, in order to prevent optimizing away instructions that pushed some of these values, since the original instruction expects those values to reside on the stack. We handle these instruction separately and keep track of the values of the stack, so we can further propagate the stack values, even though we currently can't optimize away those instructions.
* [interp] Propagate values for ctor arguments
* [interp] MINT_CASTCLASS no longer clobbers top of stack
* [mkbundle] Fix mono_aot_register_module declaration (#17139)
This change reflects the declaration introduced in jit.h in #15132.
* [mkbundle] Remove spurious function declaration (#17139)
The comment is clearly outdated after the introduction of #15132.
* [merp] Don't overrun buffer in copy_summary_string_safe
MonoFrameSummary:str_destr is an array of MONO_MAX_SUMMARY_NAME_LEN bytes, not
MONO_MAX_SUMMARY_NAME_LEN + 1 bytes.
Fixes Coverity CID 1454563
* [merp] Use g_strlcpy for copy_summary_string_safe
Fixes Coverity CID 1454563
We would sometimes write to MonoSummaryFrame:str_descr which is
MONO_MAX_SUMMARY_NAME_LEN bytes long at index MONO_MAX_SUMMARY_NAME_LEN which
is one past the end of the array.
* nit: rename confusing parameter names
old names were confusing - we were copying from 'out' to 'in'. Now we copy to
'dest' from 'src'
After https://github.com/mono/mono/commit/9ff3b0d65ee4, in an aot image we can emit addresses either as bl offset (which uses 4 bytes) or as ldr pc, =<label>; <addr> (which uses 8 bytes). Before this commit we were dereferencing an instruction pointer, in get_call_table_entry, assuming 8 bytes per entry. This could overflow and crash if we used in fact only 4 bytes per entry. Fix this by including the entry size in the aot image.
Fixes random crashes on arm CI on full-aotmixed suite.
* Build MSVC only runtime using make file system.
Add a new option to only build MSVC version of mono runtime and native
tools, --enable-msvc-only. In the past, --enable-msvc build both
mingw as well as MSVC runtime, this commit adds an option to only build
MSVC version of runtime and native tools using make file system.
Commit updates all native make file making sure mingw/gcc builds are
not done if --enable-msvc-only has been used. It also makes sure we
build and use MSVC based tools as part of build and tests.
Result will be a build without any mingw/gcc artifacts, but where all
existing make files still works with the MSVC build artifacts.
This commits is also preparing to switch the .NETCore build over to use
MSVC build runtime in order to get LLVM support, something that is
currently only supported on Windows MSVC build.
* Add link to mono-sgen.exe and clean windows binaries.
* Fix failures in mono/tests test-aot on Windows.
* Add fullaot-mixed tests on Windows x64.
* Run msbuild in parallel.
* Default to x64 mingw host on cygwin build.
```
configure.ac:6695: error: required file 'netcore/corerun/Makefile.in' not found
Makefile.am:24: error: required directory ./netcore/corerun does not exist
```
* [mini] Use clr memory model by default
Otherwise we can have potential crashes in the bcl on arm targets, since a lot of code that assumes this memory model is now shared with mono.
Keep the old clr-memory-model option alive for now, to avoid potential build problems, if building older mono with newer mono.
* [build] Remove clr-memory-model option
It is default now
* [man] Add entry for weak-memory-model
* [merp] Include any managed methods in the 'unmanaged_frames' portion of the output also
This can help correlate the two lists when we have mixed managed & unmanaged stacks in our crash output.
* Wehn symbol/function address is not found, still output the IaP
* Don't set native_offset to ip, that's not what it means
* [merp] Bump protocol version
* Minor formatting fix
* Remove paths from assembly image names
* Remove unused var
* Refactor filling in managed info for stack frame
* Revert "Remove paths from assembly image names"
This reverts commit defe86b471f37e12fa66a104747cac932943dca1.
* Use macOS version not Darwin version in MERP
Fixes#17004
* Update mono-merp.c
Ensure this is only for Mac
* Don't allocate in macos_version_string
Use a static buffer.
Also some formatting fixes.
`System/RemoteExecutorTests.cs` tests are excluded in the mobile test profiles. It makes sense to do the same for wasm.
Fixes https://github.com/mono/mono/issues/17038.
* allow ASCII equality ordinal fast path for en-* cultures
* dont use StartsWith in the initialization execution path
* Update src/System.Private.CoreLib/shared/System/Globalization/CompareInfo.Unix.cs
Co-Authored-By: Jan Kotas <[email protected]>
Signed-off-by: dotnet-bot <[email protected]>
* Moving the Arm64 intrinsic files into the Arm folder.
* Refactoring the ARM Hardware Intrinsics based on the new design.
* Adding support for AdvSimd.Add
* Adding LoadVector64 and LoadVector128 APIs to Arm.AdvSimd
* Marking the LoadVector64 and LoadVector128 methods as unsafe
* Removing the ARM64 HWIntrinsic tests
* Renaming Arm.Base to Arm.ArmBase, as per the design
* Fixing Base.cs to ArmBase.cs in the shared projitems
* Fixing the doc comments for the AdvSimd.LoadVector methods
* Marking various IsSupported methods as new, now that they inherit from ArmBase
* Fixing a malformed doc comment that was missed
* Marking AdvSimd.Arm64 as [Intrinsic] and new
Signed-off-by: dotnet-bot <[email protected]>
A valid path might be something like \\\\.\\pipe\\pipename (i.e. \\\\.\\ is a valid root). If we blindly strip all instances of `.\\` then we end up confusing our path cleaning algorithm. So permit a directory component of `.` in UNC path roots.
Closes: https://github.com/mono/mono/issues/16460
* [mini] Add memory barriers to more stores inside objects
We should now have membars for all stores of an object ref inside another object (for the stores done by the jit). Used by clr-memory-model debug option.
* [mini] Add memory barrier for storing objref in static fields
For clr-memory-model debug option.
In 6d2c77fb33 we changed the representation of
the runtimes that we will probe from a NULL-terminated array to a linked list.
Unfortunately we made a typo, and in the case where the caller of
mono_init_internal provided a runtime_version, we still picked
DEFAULT_RUNTIME_VERSION instead of the given runtime_version.
This is an issue for embedders like XA that use the "mobile" runtime - all
their assemblies are compiled with the "mobile" version number (2.0.5.0) but
Mono running with the default runtime configuration will remap to 4.0.0.0. As
a result, when there are references to 2.0.5.0 assemblies, the load requests
will be remapped to 4.0.0.0 which will never see the already loaded 2.0.5.0
assemblies, and we will fall back on the embedder's preload hook or filesystem
probing every single time. This is a performance fail.
Reverts mono/mono#16882
This broke the Mono Android SDKs build in master though for some reason it doesn't show up in the PR build:
```
[2019-09-26T03:19:55.366Z] Undefined symbols for architecture x86_64:
[2019-09-26T03:19:55.366Z] "_mono_tls_key_jit_tls", referenced from:
[2019-09-26T03:19:55.366Z] _mono_tls_get_jit_tls in libmain_a-main-sgen.o
[2019-09-26T03:19:55.366Z] "_mono_tls_key_lmf_addr", referenced from:
[2019-09-26T03:19:55.366Z] _mono_tls_get_lmf_addr in libmain_a-main-sgen.o
[2019-09-26T03:19:55.366Z] ld: symbol(s) not found for architecture x86_64
[2019-09-26T03:19:55.366Z] clang: error: linker command failed with exit code 1 (use -v to see invocation)
[2019-09-26T03:19:55.366Z] gmake[6]: *** [Makefile:1634: mono-sgen] Error 1
[2019-09-26T03:19:55.366Z] gmake[6]: Leaving directory '/Users/builder/jenkins/workspace/archive-mono/master/android/debug/sdks/builds/android-host-Darwin-debug/mono/mini'
```.
Add loading the default Mono configuration file.
Add loading the default Mono configuration file in the examples of Mono Embedded.
Also include header in existing usage of `mono_config_parse`.
This fixes problems under Raspbian, when extending the sample with your own code.
The `teste.c` is still not compiling, because the `mono_set_allocator_vtable` function is not up to date. But I was not able to find the documentation for this function.
* Revert "[Mono.Debugger.Soft] Properly close connections"
This reverts commit 2da7707373.
This was previously reverted because it was causing issues and it still does. It is a hack fix. We signal the connection for closing and next we send the dispose command over the network. This is obviously racy.
* [Mono.Debugger.Soft] Make sure receiving thread always closes
When we want to close the connection, setting the close flag is not enough, because a thread can be already stuck in a blocking receive, without getting to check the flag. We fix this by additionaly breaking the connection, by using socket.Shutdown.
Fixes https://github.com/mono/mono/issues/7377
* Bump API snapshot submodule
* BeginConnect complete to early when not using callback.
The following commit, https://github.com/mono/mono/commit/068e8fe0424806753d7ab72a7b9bf0e54b58408b#diff-33b28a9dc0b8032650ed77213481a99f
changed the way we do DNS resolve in BeginConnect using host name. Instead
of doing a blocking DNS resolve, it switched to an async DNS resolve, followed
by an async connect. The returned IAsyncResult was just representing the
completion of the DNS resolve task and not the underlying connect. It
also turns out that part of doing EndConnect, we did some validation
of the used IAsyncResult making sure it was an instance of SocketAsyncResult,
meaning that if EndConnect was called on the returned IAsyncResult from
BeginConnect, EndConnect would throw and exception.
NOTE, this only happens if you use pattern like this:
var result = sock.BeginConnect (hostName, port, null, null);
result.AsyncWaitHandle.WaitOne (2000);
sock.EndConnect (result);
It did not happened if you used callbacks, since then EndConnect would
be called as part of callback and that IAsyncResult was of correct type,
or if you did a BeginConnect with an EndPoint or IPAddress[] since that
won't trigger the DNS resolve.
Fix is to make sure we hand out the SocketAsyncResult instance that will
be used in our internal connect calls from BeginConnect. We also make
sure, we chain the DNS resolve task together with a task doing the async
connect (using the same SocketAsyncResult instance). This will make sure
the IAsyncResult returned from BeginConnect is the same one as used in
internal connect call, so it will only complete when the connect call
completes.
* Adding test for BeginConnect using host name.
* Bump API snapshot submodule
When we detach from the debugger, we reset the state by starting a new debugger thread (why don't we just use the existing thread?). As per commit https://github.com/mono/mono/commit/540ef385faa230bc226c7a83bfabd0730520911e we should shut down the debugger thread when the connection drops. However, since that commit was acting as a Dispose command was sent instead, it would end up relentlessly spawning and closing new debugger threads up until the runtime is shut down. This commit makes sure we don't respawn once the connection hangs.
* [threading] embedded mono hangs
When embedded mono is executing a C++ code, it didn't start to execute a C# code, we don't need to suspend the thread to run GC.
Fixes#16192Fixes#14725
* Changing what was discussed with Aleksey during our 1on1
* Changing what was suggested by Aleksey
* Separating mono_init_version that is being used on tests from the embedded ones
* Remove unnecessary asserts
* Make several classes static
* Use is instead of as+null check
* Use T? instead of Nullable<T>
* more static classes
* Mark locals as const
* Merge declaration and initialization of some variables
* Remove unnecessary casts
* Remove unnecessary "unsafe"s
* Simplify several lambda expressions
* Remove redundant parentheses
* Remove redundant '== true'
* Remove redundant empty lines
* Simplify boolean comparison with '== false'
* Replace if-statement with return statement
* Use while for infinite loop
* Add static to all partial static class declarations
* Use ++/-- operator instead of assignment
* Use string.IsNullOrEmpty
* Use coalesce expression
* Simplify lazy initialization
* Use coalese expression
* Join string expressions
* Use regular string literal instead of verbatim string literal
* Optimize StringBuilder.Append calls
* Remove redundant assignment
* Remove unnecessary unsafe context
* Merge processor directives
* Use String.Equals instead of String.Compare
* Use Debug.Fail instead of Debug.Assert(false
* Remove Attribute suffix
* Use predefined type
* Use compound assignment
* Use while statement to create an infinite loop
* Remove redundant base ctor call
* Avoid using catch (Exception)
* Remove empty regions
* Span comparison to null
* Avoid unnecessary boxing of value type
* Expression is always equal to 'true'
* Remove unused method
* update coalesce assignment
* fix unsafe
* fix redundant parens
* Fix whitespace errors introduced
Signed-off-by: dotnet-bot <[email protected]>
Currently netcore-build doesn't need submodules (except LLVM) so a task somewhere in arcade/microsoft.build.tasks.git always complain if those are not cloned.
Set EnableSourceControlManagerQueries=false to ignore the warnings.
* Add RenamedEvent* to FSW sources from CoreFX
Fixes#16486 - This was only partially fixed until now
* [csproj] Update project files
* Add test files which test these code paths on corefx
* Remove old RenamedEvent* files
* Remove IsFastSort optimizations from String
- Fix bugs in the Span-based globalization fast paths. Note that some of these bug fixes are going to affect performance of the globalization fast paths.
- Use Span-based globalization fast paths for strings
- Avoid static array allocation for HighCharTable
Fixes#26758
Signed-off-by: dotnet-bot <[email protected]>
Addresses an issue with jumping into DST for some time zones when the incorrect date-time offset is returned for date-time in UTC (which comes from DateTime.Now). The fix is to just check if the incoming date-time is in UTC.
Also added a set of tests for some time zones to verify jumping into DST in general.
Fixes https://github.com/mono/mono/issues/16395
* Creating a new version of MOD_KIND_EXCEPTION_ONLY to support VsWin features, discussed with Joaquin Jares.
Because we don't have this functionality of get every other exception that is not specified, VsWin was getting every exception and filtering later. But this causes a slowness during the debugger because we stop all thread on each exception that we get, even if they are caught and we don't want to stop.
* Fixing other unit test because now we have 2 nested classes.
Fixing indentation.
* Creating a flag in the MOD_KIND_EXCEPTION_ONLY protocol event and not creating a new protocol event.
* Changing what was suggested by Zoltan.
* Coding style
* Bump API snapshot submodule
The check was done incorrectly, the include files need to be separated by newlines otherwise we would get a false negative result.
config.log contained this:
```
conftest.c:279:23: warning: extra tokens at end of #include directive [-Wextra-tokens]
#include <sys/types.h>, #include <sys/stat.h>
^
//
```
This means that when doing File.GetCreationTime() we'd fall back to returning the last modified time.
It regressed when we switched to System.IO.File to the CoreFX implementation i.e. System.Native in https://github.com/mono/mono/commit/8f5cef936491e8b20888bbf18d426482c890637c.
Fixes https://github.com/mono/mono/issues/16974
Restores previous ExecutionContext Capture behavior where we were copying a new SynchronizationContext as opposed to a reference to the existing one.
The old behavior caused SynchronizationContextAwaitTaskContinuations to not post to a SynchronizationContext.
Fixes https://github.com/mono/mono/issues/16759
Reverts a fix for https://github.com/mono/mono/issues/12421
* Include Mono.WebBrowser.dll in mkbundle bundles (Closes: #7454)
Because System.Windows.Forms.dll includes an assemblyref on
Mono.WebBrowser.dll, bundles need to be able to include it
in order for WinForms to work (even if they don't actually
use a browser component)
Compare:
```
$ mkbundle hellowin.exe -o hellowin --cross mono-6.0.0-ubuntu-18.04-x64 --i18n all
From: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64
ERROR: Unable to load assembly `Mono.WebBrowser' referenced by `/home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Windows.Forms.dll'
```
to
```
$ mkbundle hellowin.exe -o hellowin --cross mono-6.0.0-ubuntu-18.04-x64 --i18n all
From: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64
Using runtime: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/bin/mono
Assembly: /tmp/hellowin.exe
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Windows.Forms.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/mscorlib.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/Mono.Security.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Configuration.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Xml.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Security.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Core.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Numerics.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Drawing.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Runtime.Serialization.Formatters.Soap.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/Accessibility.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/Mono.WebBrowser.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/Mono.Posix.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Data.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.Transactions.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/System.EnterpriseServices.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.CJK.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.MidEast.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.Other.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.Rare.dll
Assembly: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/lib/mono/4.5/I18N.West.dll
systemconfig: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/etc/mono/config
machineconfig: /home/directhex/.mono/targets/mono-6.0.0-ubuntu-18.04-x64/etc/mono/4.5/machine.config
Generated hellowin
```
For the test code:
```
using System;
using System.Drawing;
using System.Windows.Forms;
public class HelloWorld : Form
{
static public void Main ()
{
Application.Run (new HelloWorld ());
}
public HelloWorld ()
{
Button b = new Button ();
b.Text = "Click Me!";
b.Click += new EventHandler (Button_Click);
Controls.Add (b);
}
private void Button_Click (object sender, EventArgs e)
{
MessageBox.Show ("Button Clicked!");
}
}
```
* Also add Novell.Directory.Ldap (consumed by System.DirectoryServices)
* Doing the same fix from Android to IOS.
* On mini-exceptions.c check if there is no ji we can continue and generate the exception without checking wrapper_type.
Fixes#16824
The same functions are referenced by JIT and runtime.
The JIT uses cannot be inlined. The runtime can.
Since I could not get anything else to build and the change is simple and mechanical, now two sets of functions are provided, inline and extern. Extern just calls inline.
This PR appears to change all the uses, but it is only the JIT uses. The runtime ones just work and keep the old names.
We should also consider building desktop with LTO/LTCG, which would do all this automatically, smarter, more generally. A quick experiment shows it grows the runtime size, which is why I say desktop.
This includes resolving a somewhat deep problem involving
a void* that is usually to a int/float, but can be a MonoObject** or at least MonoString**.
An additional MonoStringHandleOut parameter is pass around to address this.
Perhaps it should be MonoObjectHandleOut for more generality.
[interp] avoid exception checkpoint when in thread is in GC Safe state
Usually the interpreter operates in GC Unsafe state. There is an exception however, and that is when it executes a `managed-to-native` wrapper in cooperative (or hybrid) suspend.
The wrapper does essentially:
1. enter GC Safe state via `mono_threads_enter_gc_safe_region_unbalanced`
2. call native function
3. exit GC state via `mono_threads_exit_gc_safe_region_unbalanced`
Usually upon return of a native function call, the interpreter would check for thread interruption and, if applicable, throw an exception. That, however, would mess with the GC state as the interpreter operates in GC Safe state at this moment.
Note that ignoring thread interruption at that point shouldn't be a problem, because after 3. the `managed-to-native` wrapper will check for thread interruption anyway.
Contributes to https://github.com/mono/mono/issues/16819
This is required by the newer arcade builds.
We can simplify our scripts since we no longer need the special publishwitharcade.proj.
Added copyright and license to the .nuspecs since the new arcade validation now
verifies this against a set of Microsoft policies.
We also need to make the .nupkg pre-release by appending the -preview suffix as stable versions are not permitted in non-stable feeds.
* [System] Make FileSystemWatcher backend non-static
The FileSystemWatcher `watcher` field is the backend IFileWatcher that's
supposed to be used for the actual operations.
Each backend has a `bool GetInstance (out watcher)` method that returns a
singleton object, so each new instance of FileSystemWatcher gets the same
IFileWatcher instance. (They will get different `watcher_handle` instances
which are used by some backends to uniquely identify this FileSystemWatcher).
However when the first FileSystemWatcher instance is `Dispose`d, it will set
`watcher = null` which will prevent the remaining instances from calling
watcher?.StopDispatching (watcher_handle);
watcher?.Dispose (watcher_handle);
which means that the backend won't properly cleanup resources for any other FSW
instances that have other `watcher_handle` values.
Addresses https://github.com/mono/mono/issues/16709
* [Coop] InterlockedExchange (object and T), InterlockedCompareExchange (object and T).
- Usually intrinsified.
- Always?
- Avoid coop handles by manually always using ref to object.
- For efficiency on input, and efficiency wrt MonoError.
- For correctness on output (due to aliasing in the wrappers).
- To probably avoid assertion failure in runtime around icall marshaling of generics.
- Unclear on location.
* Balance parens in prints, so they are balanced in the code.
* Reduce local arrays from 16 to auto-sized 1.
* Update and reformat System.Threading.Interlocked signature recognition.
* Rename the generic again to "_T" (or "Generic"?) on the theory
that the aot-runtime.c signature check is too strict/incorrect,
but that if we loosen it, it is not clearly specific to the generic.
* Revise corlib version again.
* Bump API snapshot submodule
ApplicationTrustEnumerator used to call itself. The following snippet crashed with SO:
using System.Security.Policy;
public class Program {
public static void Main (string[] args)
{
ApplicationTrustCollection col = ApplicationSecurityManager.UserApplicationTrusts;
col.GetEnumerator ();
}
}
hybrid suspend won't get disabled when using --enable-cooperative-suspend
triggering configure error:
Hybrid suspend and Cooperative suspend cannot be both enabled.
Fix explicit set hybrid suspend default behavior to no if cooperative
suspend has been configured.
- Use __builtin_bswapxx for s390x rather than inline assembler
- s390x ABI specifies that %f8-%f15 are protected between calls so avoid using or save/restore as required
- Save the "protected" FP registers in the context structure
[mini] Add missing membars when initializing rgctx entries
Whenever we are publishing changes to the rgctx arrays, we are racing with rgctx_lazy_fetch_trampoline, so we need to make sure any pointers we set there must have their contents initialized.
We sometimes saw the following build error in Mono SDKs builds on Jenkins:
```
[2019-09-16T01:03:30.709Z] CSC [xammac] nunit-lite-console.exe
[2019-09-16T01:03:30.709Z] error CS0009: Metadata file '/Users/builder/jenkins/workspace/archive-mono/2019-08/mac/release/mcs/class/lib/xammac/nunitlite.dll' could not be opened -- PE image doesn't contain managed metadata.
```
Taking a closer look we found out that nunit-lite was trying to be built twice for the same profile which caused a race where the file was corrupted.
The reason for this is that the corlib Makefile defines two test assemblies: the normal PROFILE_corlib_test.dll and BinarySerializationOverVersionsTest.dll and
integrating the BinarySerializationOverVersionsTest.dll via the `test-vts` target incorrectly overwrote the `test` target instead of using `test-local`.
This started as an effort to reduce the size of System.Net.NameResolution.dll when publishing a trimmed app. It's not that big to begin with, but it's carrying around a copy of all of the IAsyncResult helper types, because the Get*Async methods are currently wrappers for the Begin/End* methods.
This PR inverts that, wrapping the Begin/End* methods instead around the Get*Async methods, using the same TaskToApm helper we use in other places in corefx for the same purpose. This makes the Get*Async methods faster and lighterweight, but it does increase the number/amount of allocation in the Begin/End* APIs. Since these are considered legacy, I normally would consider that a good trade, however we still use these Begin/End methods in a few places in System.Net.Sockets, and I didn't want to regress those use cases.
So, this also then trims some additional fat, which helps the Get*Async cases even further, and gets the Begin/End* to be even better than before the change. This includes not allocating an IPHostEntry when we're just going to unwrap it and return its addresses, computing the exact IPAddress[] size we need rather than using a List<> to grow it and ToArray to create the actual array, avoiding creating the HostName if we don't need it, and avoiding an unnecessary SafeHandle allocation.
As part of this, I also noticed that we had some bugs in how some of our interop structures on Windows were defined. In particular, fields that in the native types were size_t were defined as int rather than IntPtr in the managed code. It appears we were saved by padding, but I fixed it regardless.
And as long as I was changing pretty much everything else, where I was touching code I also cleaned up some legacy style stuff.
Signed-off-by: dotnet-bot <[email protected]>
[arm64_32] make "Debug Mode" work on Watch series 4 with --interpreter
Main objective for reviewers: This PR shouldn't change anything for `arm64`.
Context: "Debug Mode" on the Apple Watch allows execution of regular machine code and thus is pretty similar to FullAOT on iPhone, i.e. it doesn't require bitcode, but _still_ doesn't allow `signal(3)` so cooperative suspend is required.
Apple Watch Series 4 and onward use an ARM64 chip, but with a different ABI, also known as `arm64_32`. This PR changes the AOT compiler and related trampolines so that the AOT compiler can generate all necessary code to run the interpreter on this target.
Changes:
--------------------------------------
[arm64_32] set register size to 8 in cross compiler too
-----------------------------------------
[machine] update `target_mgreg_t` definition
`SIZEOF_REGISTER` is usually the same as `TARGET_SIZEOF_VOID_P`, except when `MONO_ARCH_ILP32 is defined.
`target_mgreg_t` should represent the width of the hardware register, that is, `SIZEOF_REGISTER`.
---------------------------------------------
[arm64_32] fix AOT image layout
---------------------------------------------
[arm64_32] make trampolines bitwidth aware
* replace pointer loads/stores with bitwidth-dependent macro
* reflect `specific` trampolines so that only two instructions are used for ILP32, since the related pair in the data page only needs 2 * 32bits too
* replace some `sizeof (target_mgreg_t)` with `TARGET_SIZEOF_VOID_P` (former is hardware register size, latter is pointer size)
---------------------------------------------
These regression tests are _not_ passing: https://github.com/mono/mono/issues/16864 Also some of monotouch-tests are crashing, see https://github.com/mono/mono/issues/16819
Here is a screenshot of a debug session in VSMac:
<img width="1321" alt="Screenshot 2019-09-16 at 19 13 22" src="https://user-images.githubusercontent.com/75403/64981326-1dfbc000-d8bc-11e9-9d16-48036f36b638.png">
Contributes to https://github.com/mono/mono/issues/10641
Treat [In, Out], [In] and unspecified as input arguments. Important change from
current behavior is to allow parameter without directional attributes.
Use case example is _MethodInfo.Invoke() method called from native client.
- Factor out reptition into already existing macros.
- Remove the default for computed goto which is dead.
Computed goto has no notion of default. It is just
an unchecked array access.
Extracted from https://github.com/mono/mono/pull/16721.
* [interp] Pass rank instead to LDELEMA
It feels more intuitive and uses less computations.
* [interp] Avoid unnecessary type check
Loading element address of array requires type checks only if the elements of the array are references.
* [interp] Avoid using MINT_CALLRUN for Get intrinsic
It is very slow. Use ldelema/ldobj pair instead.
* [interp] Optimize MINT_LDELEMA
* [interp] Rename ldelema_fast to ldelema1
ldelema_fast was handling arrays with a single dimension. Rename it to better suggest this.
* [interp] Avoid using MINT_CALLRUN for Set intrinsic
* [interp] Remove some duplicated and confusing code
* [interp] Fix stack type of MINT_NEWARR result
When creating a new culture, we’ll have the equality CultureInfo.DateTimeInfo.Calendar == CultureInfo.calendar be true. After cloning such culture, this equality would not be true. The fix here is to ensure if the equality is true before cloning then should be true after cloning.
Signed-off-by: dotnet-bot <[email protected]>
* [runtime] Fix configure support for netcore+out of tree builds. Add wasm support for generating netcore/config.make.
* [runtime] Add bundle support for the netcore assembly loader.
* [netcore] Add missing linker exclusion.
* [wasm] Add netcore builds, enabled by defining ENABLE_WASM_NETCORE in Make.config.
The targets are 'package-wasm-runtime-netcore' and 'package-wasm-bcl-netcore'.
The binaries are copied to out/wasm-runtime-netcore-<CONFIG> and out/wasm-bcl/netcore.
* [wasm] Add netcore support to the build system and packager.
* Fix the build.
* Fix the dynamic build.
* Fix infrequent hangs in test-runner.
test-runner has been plagued with very infrequent hangs causing long
timeouts on CI. Turns out that there is a race in AsyncStreamReader
used by Process class for handling stdout/stderr when closing down
process. Since AsyncStreamReader::Dispose didn't make sure no pending
async read requests were still in flight before closing the stream
and underlying handle, it led to a race condition deadlocking the
complete process, hanging test-runner. A similar race has also been
observed but instead of causing a deadlock, it could also manifest as an
System.ObjectDisposedException when doing EndRead while another thread
is disposing the underlying stream. Hitting that race didn't deadlock
the process but failed to complete invoke of test-runner.
Fix is to better protect the async callback and the thread doing the
dispose call. In order to make sure we don't close underlying handle
while still having async reads in flight, fix also checks async result
for completion and if not completed when trying to dispose AsyncStreamReader
it will try to cancel outstanding pending IO and wait for completion
before closing the stream.
Since the issue has only been seen on Windows, the fix will try
to cancel pending IO and wait for completion before closing stream
on Windows. On other platforms, old behavior will be preserved, meaning
that the implementation will still be vunarable to race between pending
reads and close of stream, but since problem has not been observed on
other platforms and since there is no good way of cancel outstanding
blocking reads, old behavior is kept.
At some point in future we should look into replacing the implementation
of AsyncStreamReader and use cancelation tokens, but since we don't have
all corefx support around cancelation in Mono BCL, that currently won't
solve the issue, meaning that we need to bring in more classes. Since the
problem also occur in test-runner using the build BCL profile, even more
needs to be added to that profile in order to get similar support. But due
to the infrequency of the problem and that it has only been observed on
Windows, the isolated fix seems more reasonable.
* Build error fix.
* Review feedback.
* Fix type cast not working on linux builds.
* Adjust icall naming in icall-def.h.
* [netcore] Change an ArrayList to a List<T>.
* [netcore] Call the generic version of Array.IndexOf () in the ICollection wrappers. Update exclusions file.
Since each function has its own module (in JIT mode) it makes sense to dump the whole module for MONO_VERBOSE_METHOD instead of just LLVM::Function.
It adds metadata, attributes and global variables (so it will be possible to copy-paste it to godbolt)
Example
static int Test(int x)
{
return x / 10;
}
Diff for Unoptimized IR: https://www.diffchecker.com/NrF413Ts
Diff for Optimized IR: https://www.diffchecker.com/jbEkeFFS
So now we can see global variables and metadata for each function (and can easily paste them to godbolt.org)
NOTE: optimized IR for this case contains "dead" variables (dump_module allowed us to see such), we probably need some Module-wide optimizations to strip dead code such as -globaldce
NOTE2: why do we emit exceptions in the first place for this case at all?
This is a legacy of before the profiler was used for the trace
output; it would apparently get the raw stack pointer and try to
dereference things by recalculating the offset as needed (no for
little, yes for big). However, because the profiler returns the
actual fixed-up pointer, this recalculation isn't needed on BE,
but instead grabs garbage a bit ahead on the stack.
To fix, use what was the little endian case unconditionally.
Example before:
[1: 20.70598 14] ENTER: System.Globalization.CultureInfo:.ctor (int,bool,bool)(this:700000000408fb0[System.Globalization.CultureInfo platform.exe], 271824864, -32, -32, )
Example after:
[1: 1.93377 14] ENTER: System.Globalization.CultureInfo:.ctor (int,bool,bool)(this:700000000408fb0[System.Globalization.CultureInfo platform.exe], 127, 0, 1)
[aot] Do not put quotes around wrapped path
Should fix: https://github.com/xamarin/xamarin-android/issues/3619
As it results in double quoting, which vanishes the effect and breaks
AOT for XA on Windows.
The actual error:
[aot-compiler stdout] Stripping the binary: ""C:\Program Files (x86)\Microsoft Visual Studio\2019\Stable\MSBuild\Xamarin\Android\ndk\arm-linux-androideabi-"strip" --strip-symbol=\$a --strip-symbol=\$d obj\Release\90\aot\armeabi-v7a\libaot-Xamarin.Android.Arch.Core.Common.dll.so.tmp
[aot-compiler stderr] '""C:\Program' is not recognized as an internal or external command,
[aot-compiler stderr] operable program or batch file.
[aot-compiler stderr] AOT of image C:\Users\peter\source\repos\App9\App9\App9.Android\obj\Release\90\android\assets\Xamarin.Android.Support.CoordinaterLayout.dll failed.
* [interp] Add flag for locals that have their address taken
The previous handling of LDLOCA was broken because if the address was taken before the instructions that would be optimized we would miss any potential changes to the local value. Right now we just skip optimizing locals that have their address taken. This is achieved simply by not pushing LDLOC on the evaluation stack, for those locals.
* [interp] Add separate counters for optimized instructions
To provide more insight.
* [interp] Propagate locals
Whenever we generate a movloc we remember what local was copied. When loading a local we check if it's currently storing the value of another local, in which case we load the original local instead.
* [interp] Kill instructions that write to dead locals
We track the liveness of a local by counting how many times the local is loaded using ldloc. When such instructions are optimized, the ldloc counter is updated accordingly.
* [interp] Don't optimize code if under debugger
* [interp] Replace frame_objref with volatile stores to non-volatile locals.
Non-volatiles subject to volatile read/write still get stack-packed.
Volatiles do not.
This will possibly conserve stack, unless MINT_NEWOBJ_FAST is critical path.
It looks like it is -- enabling this for Linux/gcc/amd64 grows
frame from 0x98 to 0xA8.
In either case, it is more efficient as the reads do not have to be volatile.
The value can be on the stack and in registers. The stack value will pin it.
* PR: Comments.
* PR: Rearrange comment for correctness, same length.
S.R.CS.Unsafe is used in number of places in Vector<T> already. This change modifies more places to use it to make the code more compact.
Updated Vector.tt template to match while I was on it
Signed-off-by: dotnet-bot <[email protected]>
* improve logging for EventSource.WriteEvent
* Fix IndexOutOfRangeException in SerializeEventArgs when incorrect arguments got passed
* simplify arg-check; remove nullable-todo
* switch from Debugger.Log to ReportOutOfBandMessage
* Remove unused flush-Paramater from ReportOutOfBandMessage
* fix parameter type nullable-check for reference-types
* fix parameter type nullable-check for nullable-types
Signed-off-by: dotnet-bot <[email protected]>
* nuspec for llvm
* Add llvm to matrix
* fix scripts/ci/pipeline-netcore-runtime.yml
* fix scripts/ci/pipeline-netcore-runtime.yml
* fix scripts/ci/pipeline-netcore-runtime.yml
* run tests with llvm
* add macOS lane
* disable llvm tests for now
* [interp] Fix buffer overreads and overwrites found by valgrind.
* Attempt to deal with inlining correctly.
* PR: Dial back IR changes. Only IL relevant.
* PR: Dial back more -- only needed changes to .NET IL manipulation, not interpreter IR manipulation.
* PR: Remove one more line.
Eventually this could contribute to stack savings. On its own, nothing.
The compiler apparently likes to create temporaries, like ip and ip - 1.
Which then have to survive functions calls, on the stack, if nonvolatile registers are exhausted.
This combats that and in a larger PR helped.
-p PORT allows easier retrieval of AOT profile from the application
running with aot profiler, using the socket connection on local PORT
-f instructs the tool to try setup adb port forwarding to/from Android
device or emulator
Example usage, retrieve the AOT profile from Android:
> mono aprofutil.exe -s -v -f -p 9998 -o my.aprof
Calling 'adb forward tcp:9998 tcp:9998'...
Reading from '127.0.0.1:9998'...
Read total 94903 bytes...
Summary:
Modules: 6
Types: 262
Methods: 1,162
Going to write the profile to 'my.aprof'
* Fix Running .NET Core Under Winndows App Compat Shim
.NET Core uses Windows features called sort handles for perf reason to speed up the collation operations (e.g. string comparisons). When enabling Windows app compat shim (e.g. Windows 7 compatibility mode), the calls uses sort handles will fail which cause all collation operations to fail.
The fix here is to detect if the sort handles work before using it to ensure successful run.
* Address the feedback
* More feedback addressing
Signed-off-by: dotnet-bot <[email protected]>
* [wasm] Add missing aot-profile/runtime.js.
* [aot] Avoid writing out a zero AOTID in deterministic mode.
* [wasm] Add --aot-profile= option to packager.
* Modify configuration flag `ENABLE_WASM_DYNAMIC_RUMTIME` to `ENABLE_WASM_DYNAMIC_RUNTIME`
* Modify configuration flag `ENABLE_WASM_DYNAMIC_RUMTIME` to `ENABLE_WASM_DYNAMIC_RUNTIME`
* Modify configuration flag `ENABLE_WASM_DYNAMIC_RUMTIME` to `ENABLE_WASM_DYNAMIC_RUNTIME`
* [wasm] stop excluding test_0_large_nullable_invoke on wasm
* [wasm] remove wasm exclusion from test_0_simple_double_casts
* Add category MultiThreaded to more of the concurrent collection tests
* Add more MultiThreaded annotations to HttpListener2Test
* Add category MultiThreaded to HttpWebRequestTest
* [wasm] flag more tests that are taking down the runtime
* [wasm] force sockets to throw PNSE in the ctor for now
* [wasm] enable corlib interpreter tests
* [wasm] Increase timeout for corlib tests
* try to fix wasm-cross-win-release-configure on macos
* [wasm] Fix several typos
* add a comment about an error in test class name
* Remove the comment about test class name because it could be passed on xunit command line
Also removes dependency on System.Range and RuntimeHelpers.GetSubArray in a simple console app such that they can be trimmed away.
Signed-off-by: dotnet-bot <[email protected]>
These are not currently supported, but marking them as simd helps llvm eliminate dead variables with these types, since
XZERO is easier to eliminate than VZERO.
* [cominterop] Add a helper to create default marshal spec for ccw arguments.
* [cominterop] Default to SAFEARRAY(VARIANT) as CCW argument for object[].
* [cominterop] Fix build with --enable-cxx.
[interp] Embrace that ip is const guint16* and remove casts to that type.
or to gint16*. Or is there a reason for this style?
Maybe could change type but still want to cast for the deref?
Before this commit, the only information associated with a local was just the offset at which it resides and instructions had this offset embedded from the start. This makes it awkward to have data structures indexed on the local, or have additional information per local, which we might care at some point (for example if it is multi basic block local, if the address of the local was taken etc). In addition to this, if we will want to remove some instructions that make some locals dead, it means that we will have to compact the whole locals space and update all the offsets referenced by all instructions. We solve all these problems by resolving (and allocating) the local offset at the latest time, while emitting the instruction in the compacted byte stream. At this point dead locals will remain dead, with no additional work needed to handle them.
For now, IL locals of the current method that we are compiling are immortal. We can address that later if needed.
Keeping these reflection enabled pulls in quite a bit of junk (generic dictionaries, standalone method bodies, bookkeeping) that adds up to 1.5% of the size of Hello World...
Signed-off-by: dotnet-bot <[email protected]>
The implementation reads the current value of the static cache field and then later overwrites that field with the originally read value. If ClearCachedData was called in the interim to clear the cached data, this will end up effectively undoing part of that clearing, as it'll end up restoring the previous cache. The fix is to write back the new reference only when we need to, which we could do when we detect it's null.
There's a secondary race condition this fixes as well. When a name and an altname are used with CultureInfo.GetCurrentCulture(string, string), the implementation was publishig the newly created instance into the dictionary under the lock, but then after the lock was released, it was setting that TextInfo to be read-only. That provides a window where another thread could see it as non-read-only and mutate it. The fix is to ensure it's marked as read-only fully before it's published.
As I was doing this, it struck me that the implementation was overly complicated, trying to merge three different code paths for three different callers, presumably to share code, but most of the code ended up not being shared anyway, which just made the code harder to follow for little gain. So, I split it back out into the three calling functions and removed the helper.
I also changed the locking mechanism. It had been using a single shared lock to protect all state, but the purpose of the lock is really just to synchronize access to an individual dictionary, so we can just lock on the relevant dictionary.
Signed-off-by: dotnet-bot <[email protected]>
* Remove stale SuppressMessage attributes (dotnet/coreclr#26501)
Signed-off-by: dotnet-bot <[email protected]>
* Use null coalescing assignment operator in more places
There's currently no auto-fix for this, so the fixes were done manually.
Signed-off-by: dotnet-bot <[email protected]>
* Fix IDE0026 (use expression-bodied members for indexers)
Signed-off-by: dotnet-bot <[email protected]>
* [jit][llvm] Track variable nullness separately from array length ranges/index ranges in abcrem.
"Nullness" is tracked via a separate field that is stored adjacent
variable/array value ranges; values may be "maybe-null" or "not-null";
the intersection of maybe-null and not-null yields not-null, the union of
maybe-null and not-null yields maybe-null. The existing graph traversal logic
is reused as much as possible, which makes the implementation of this
null value approximation slightly more complicated than it would be
otherwise.
Fixes https://github.com/mono/mono/issues/16310, which was caused by
the use of non-empty array length ranges as a way to encode non-null
values.
This also allows null check elision for zero-sized arrays.
* Fix C++ compatibility. Fix a typo in a comment.
* Add symmetric nullness relations.
* Make ldlen imply that the source register is not-null, similar to CHECK_THIS or any other null check.
Callers of mono_reflection_create_custom_attr_data_args_noalloc were leaking some of the returned information. Accessed attributes are FixedBufferAttribute and UnmanagedFunctionPointerAttribute.
* [interp] Reduce unnecessary uses of frame->ex
* [interp] Remove ex from InterpFrame
We save stack space and move the exception where it belongs, in ThreadContext. It was confusing what frame->ex really meant, it was probably not used / initialized properly. We move it now to ThreadContext where it represents the current exception being thrown during EH (when we have a resume state set).
* Disable `subdir-objects` mode in Automake
This forces creation of subdirectories' files (e.g. .deps/*.Plo) in the
parent directory listing the source file. This works around a situation
where two different files specify files in a different parent directory
(i.e. ../../support/adler32.c in mono/metadata/ and adler32.c in
support/) both emit files into the same place (support/.deps), causing
`make distclean` to try and delete support/.deps from two different
places, breaking distclean.
This unfortunately adds a pile of Automake warnings, during autogen.
The "correct" fix is to stop specifying zlib as a pile of flat .c files,
and instead put it in its own subdirectory, conditionally including
its .la files as required.
Partially fixes https://github.com/mono/mono/issues/16605
* Ship netcore/Makefile with an empty distclean rule
We need a netcore/ directory because we write to it during configure,
and we need a netcore/Makefile with a distclean rule, so top-level
recursive distclean doesn't fail. So specify both here.
Partially fixes https://github.com/mono/mono/issues/16605
* [netcore] Fix the range checks for Vector.CopyTo().
* [netcore] Fix Vector.get_Item () for u1/u2, the llvm type is a vector of i1/i2, so we need to zero extend.
GCHandle is mutable, and this type does call Free on the handle, but with it marked as readonly, the mutations performed by Free will be done on a copy rather than on the original.
Signed-off-by: dotnet-bot <[email protected]>
* [llvm] Add functions to create weighted branches.
* [llvm] Use weighted branches in GC_SAFE_POINT, some llvm passes doesn't seem to recognize llvm.expect so the LLVM JIT generates the slow inline.
* Refactor BinaryReader.ReadChars using Span (dotnet/coreclr#26325)
Avoids unsafe code and makes the code simpler
Signed-off-by: dotnet-bot <[email protected]>
* Remove unnecessary parens from `return (true);` and `return (false);` (#26488)
Just a search and replace.
Signed-off-by: dotnet-bot <[email protected]>
* Avoid some unnecessary initialization in DateTimeParse (#26487)
Signed-off-by: dotnet-bot <[email protected]>
* Update analyzer versions (dotnet/corefx#40778)
In particular to pick up StyleCop fixes related to C# 8 and nullability.
Signed-off-by: dotnet-bot <[email protected]>
1. When comparing strings, check pointer equality.
Faster when they match, slower when they do not.
2. Provide string lowercasing into a provided buffer, which can equal
the input, to avoid extra malloc/free.
3. define G_STRING_CONSTANT_AND_LENGTH(x) (x), G_N_ELEMENTS (x) - 1
e.g. strncmp (foo, G_STRING_CONSTANT_AND_LENGTH ("version"))
mono_handle_native_crash() function can actually return if the native crash has triggered or has been trigerred by more than one signal. So it is possible to reach the point of the assert
This is so that complex consumers such as Visual Studio for Mac can forego attempting to enumerate all loaded libraries, register them one at a time and potentially keep the list updated
* [Coop] ves_icall_InternalInvoke.
(Part taken from ves_icall_InternalExecute https://github.com/mono/mono/pull/16622.)
* error_init_reuse.
* Remove stars from types.
* Fixing single step inside Exception on Android...
The method is null because on ss_create_init_args the IL is -1 when calling method Mono_UnhandledException_internal what I think it's expected, because of that I ignore the single step on android if there is no method. (debugger-engine.c)
After that the sequence point cannot be found because it's calling a method of class DynamicMethodNameCounter what I think it's expected, because of that I remove the assert on android. (debugger-agent.c)
Fixes#14772
* Changing comment to make it clear...
* [interp] Add stack information for each instruction
For each instruction PopN indicates how many values from the top of the stack are used by the instruction. PushN signals how many values are pushed back. These are also used to prevent values from the stack being optimized out, since they might still be used by an instruction. VarPop and VarPush mean that the number is not constant, so we need to inspect the data fields of the instruction (typically for an imethod or csignature) to figure out the stack usage.
* [interp] Convert ldloc/stloc pairs to movloc
The movloc instruction operates directly on locals. This is faster due to avoiding dispatch and stack indirection. More important is that it makes it easy to do copy propagation of locals and it has no stack usage, which means that it could even be killed if the destination local is no longer referenced (as well as STLOC_NP). In the future we could reuse this mechanism of tracking the value of a stack slot to do constant propagation and kill even more instructions (we might need to have _IMM versions of opcodes for this to work).
* [interp] Enable disabling of interp optimization
* [interp] Add time tracking stat for cprop optimizations
* [interp] Move stloc.np transformations to the cprop pass
It makes more sense to do such transformations here and we also don't want transformations in the generate phase prevent us from detecting alternative transformations when running the full pass.
* [interp] Add counter for instructions that were optimized away
* [interp] Make it explicit that we are dealing with IR code
It can be confusing in verbose output.
* Remove MAX_PATH usage in w32process
* Fixes
* Shrink buffer temporarily
* More fixes
* Reset buffer size to 260
* Fix length check and add notes
* Actually free things
* Add tracing and zero len at start
* Typo
* Fix another leak
* Simplify logic
It turns out it's not enough to set global fast math parameters, it's also required to mark some instructions as "fast" (see https://llvm.org/docs/LangRef.html#fast-math-flags) like, for instance, clang does, see https://godbolt.org/z/U8TFST
E.g. all optimizations inside SimplifyLibCalls pass (it's a subpass of InstCombine) need it.
Remove ASP.NET sample (we currently have to download apsnet runtime everytime)
instead we can do:
dotnet new webapp
and do make patch-app APP_PATH=/path/to/myasp (works for any kind of apps/templates)
* [jit] Relax assembly checking for 64 bit targets to allow running mixed-mode MSVC code.
Fixes#37913
* STACK_PTR|I8 should be the same as I8|STACK_PTR tuple
* fix i4 to ptr conv on 64bit
* [interp] Remove some some false is_bb_start markings
Having fewer basic blocks makes potential optimizations more effective.
* [interp] Persist variables in TransformData
Thate are not used by inlined code because we don't inline code that has multiple basic blocks or clauses.
* [interp] Enable emitting of MINT_NOP instruction
This instruction will be optimized away when compacting the instruction stream.
* [interp] Clear instructions insead of removing them
Makes everything easier.
* [interp] Fix some instructions size inconsistencies
* [interp] Add more is_bb_start markings
* [interp] Add nop instead of extending bb
We should always have an IR instruction associated with an IL offset, especially when that instruction is a bb_start since we will need to branch to it and resolve the IR instruction from the il_offset.
* [interp] Simplify resolving in offset
We should always have an in_offset associated with the il_offset we are branching to.
* [interp] Add correct il_offset for all instructions
Except for special prolog instructions that will have -1 as the offset. We don't make much use of il_offset for non bb_start instructions, but they might be useful for debugging.
* [interp] Fix il_offset of some conv opcodes
[runtime] Make eglib tests run on CI
Update mono/eglib SUBDIRS to build tests after eglib is built.
Add a check-local automake rule.
Add CI steps to run the eglib tests.
* Cleanup x86_patch and amd64_patch.
amd64_patch has two incorrect looking probably unused cases.
g_assert(0) and fix them.
call and jmp indirect (one case)
move reg RIP relative
x86_patch is large-ish inline macro.
Presumably for sharing with amd64, not inlining.
Restructure as an inline function, called once.
Try to make the code a little clearer also, with same functionality and efficiency
(modulo the optimized perf of "if i == 4" vs. "if i")
i.e. speak of instruction_size and offset_size, not pos and boolean size.
Add to x86_patch the ability to patch jmp/call indirect,
as amd64_patch has, but which was incorrect.
This would seem useful for a later change (using "thunks"
to patch nearby data instead of patching aligned instructions,
indirect call/jmp vs. direct).
amd64_patch largely delegates to x86_patch.
One case asserts and delegates.
Move the assert to the x86 side, where an optimizing
compiler should know to remove it for x86 anyway.
Change some assert to g_assert.
Remove some unnecessary casts.
Fix an assert (https://github.com/mono/mono/pull/16471).
* Change g_assert back to assert except where making larger changes
and less expansion.
[mini] publish global patches after JitInfo has been added
Fixes https://github.com/mono/mono/issues/14080
Consider the following example:
```csharp
static void CommonCallTarget () { }
static void TailA () {
tailcall CommonCallTarget ();
}
static void TailB () {
tailcall CommonCallTarget ();
}
```
Since `TailA` and `TailB` are tailcalling into `CommonCallTarget`, the resolution at patch-time is a bit tricky, that is, since it's a jump-like instruction the patching machinery won't know where it was called from. That's why we maintain a global hashtable `jump_target_hash` where each jump-site is signed up to be patched. At patch-time we know the target method (in the example `CommonCallTarget`), but since we don't know where we are coming from, we will just apply all patches for that target.
This works since ages, so why did it crash on arm64 sometimes?
When the patching happens, we check if the displacement between jump-site and target fits into it (24bit). If not, which happens not very often, we have to allocate a _thunk_:
https://github.com/mono/mono/blob/36296ce291f8a7b19de3eccb7a32c7e4ed9df8f2/mono/mini/mini-arm64.c#L928-L942
So instead of jumping to the target directly, we'll branch to the thunk. This is a little trampoline that loads the full address of the target and then finally branches to it. This one will live close-by the jump-site, because during compilation we will reserve specifically for that scenario some space after the generated code. For this, however, we need the JitInfo of the jump-site. And that's where the origin of the race is. Let's say:
* Thread A compiles `TailA`, and then jumps into it. Thus one patch point is in the `jump_target_hash`.
* Now Thread B compiles `TailB`, registers the patch point but has _not_ yet registered its JitInfo.
* Then Thread A continues, does the tailcall into `CommonCallTarget`, enters the patching machinery, which sees two patches. Now assume when applying the patch for `TailB` the displacement is too large, thus it tries to allocate a thunk but can't find the relevant JitInfo for it that it needs to emit the thunk. So it crashes as reported in https://github.com/mono/mono/issues/14080
As far as I can tell this only affects ARM64, ARM and PPC.
<!--
Thank you for your Pull Request!
If you are new to contributing to Mono, please try to do your best at conforming to our coding guidelines http://www.mono-project.com/community/contributing/coding-guidelines/ but don't worry if you get something wrong. One of the project members will help you to get things landed.
Does your pull request fix any of the existing issues? Please use the following format: Fixes #issue-number
-->
Revert "[android] add hardware specific workaround for Nexus9 in armv7 mode"
This reverts commit ee90fc601e (also see https://github.com/mono/mono/pull/4878 ).
The device was released November 2014. I think it's fair to assume it isn't widely used anymore.
Add F_OFD_GETLK, F_OFD_SETLK and F_OFD_SETLKW to FcntlCommand. These
commmands are similar to F_GETLK, F_SETLK and F_SETLKW but operate on a
per-open-file-description lock instead of a per-process lock and avoid the
problem that the locks are released when close(dup(fd)) is called. See
https://lwn.net/Articles/586904/ for more information.
This commit also reruns create-native-map but keeps manual changes from
ed892ccf27,
b522eab5ff and
22b6b95814.
In [create-native-map.diff.txt](https://github.com/mono/mono/files/3557077/create-native-map.diff.txt) you can see the difference between the commited `map.[ch]` and the one `create-native-map.exe` wants to create:
- Manually inserted changes for NetBSD (`MAYMOVE` is turned into a negated `FIXED`)
- `Mono_Posix_ToSockaddrIn6()` and friends get skipped for `HOST_WIN32` (not sure why, when `sockaddr_in6` exists then `Mono_Posix_ToSockaddrIn6()` should work)
- At the bottom of `map.h` some functions are reordered and the parameters change (`const char*` vs. `char*`)
Running create-native-map.exe also moved some O_NOATIME-related stuff (from 8b9033e4d2) to the correct position and added it to Mono_Posix_ToOpenFlags(), which I kept in the commit.
[configure] remove autodection of llvm-config in $PATH
Instead `./autogen.sh --with-llvm=<path>` should be used if a build from `external/llvm` is not preferred.
The old behavior was confusing when a `llvm-config` is on `$PATH`, which can be the case when you have LLVM packages installed on a Linux distribution. It picked that up when `./autogen.sh --enable-llvm` was used.
/cc @brianrob
* [interp] Compress the interpreter opcode names in the usual way, by changing
from an array of pointers to an array of 16 bit offsets into one large "string".
* PR: Make mono_interp_opname a function.
* [coop] Convert System_Runtime_Remoting_Messaging_AsyncResult_Invoke, etc.
* Remove mono_load_remote_field_checked from this PR.
* Pin ac->msg earlier (should not matter).
* Add missing barrier.
* Pin slightly earlier -- still should not matter.
Cleanup trampoline size checks.
- named `int` everywhere
- `assert` everywhere
- assert `<=` everywhere instead of `<`
- `const` almost everywhere
Names not consistent, following existing code (`size`, `buf_len`, `kMaxCode`.)
Only touching x86/amd64, granted.
Could be better -- make them two pass and avoid the presizing.
* Use the right FileSystemWatcher sources
The corefx code for FileSystemEventArgs has some changes to support
constructing one with a null filename.
Fixes#16486
* Remove the mono sources for the newly replaced files
* [csproj] Update project files
Read only memory is preferred, for efficiency and security.
Even if it requires relocation first.
If the runtime is loaded in more than one process, physical pages can be shared (at least on Windows, where the kernel does the relocation).
If there is memory corruption, writes to here will sigsegv/accessviolate.
The older code also copied the pointers. For lifetime purposes that could be useful, but generally is not. i.e. they live with the code they point to.
Writable function pointers are also particularly targets for attackers.
There's been tons of defenses put around them through the years.
Read only ones are not vulnerable -- unless the attacker escalates and calls mprotect first.
When there is a JIT, arguably there is just tons of attack surface.
But there is also AOT.
Structs of function pointers are usually read only in the wider world.
Resolves https://github.com/mono/mono/issues/16122
Since we put in the corefx version of GZipStream, it is expected that
our version of DeflateStream actually implements Write+ReadAsyncMemory.
This change does that by just calling the plain WriteAsync & ReadAsync
methods until we decide (or not) to pull in the corefx DeflateStream.
[mini] do not re-AOT whole BCL for fullaotcheck targets
And enable `llvmfullaotcheck` target on CI.
Fixes https://github.com/mono/mono/issues/15999
On my armv7/linux machine with a `--with-runtime-preset=fullaot_llvm` configured build, before this PR:
```console
$ time make -C mono/mini llvmfullaotcheck -j4
[...]
real 9m42.362s
user 23m2.000s
sys 0m18.480s
```
After:
```console
$ time make -C mono/mini llvmfullaotcheck -j4
[...]
real 3m1.984s
user 4m51.648s
sys 0m8.248s
```
* [merp] Initialize hang_watchdog_path earlier; be lax if it's missing
Initialize hang_watchdog_path earlier - not just when
ves_icall_Mono_Runtime_EnableCrashReportingLog is called. That function is
only expected to be called by apps that explicitly want progress reports from
MERP when it's collecting a crash report. But we want the mono-hang-watchdog
to execute for all mono crashes (when crash reporting isn't ifdef'd out).
Also if we try to exec mono-hang-watchdog and fail for some reason, print a
nice message and then exit. We used to call g_assert_not_reached which would
kick off another MERP of the _forked child process_ which would then get
confused because it really can't run in the forked process at all.
On Unix, TransitionTimes are not used, so they are left empty. When deserializing an empty TransitionTime, it is throwing an exception because those are not normally valid. Fix deserialization to not validate empty TransitionTimes.
Fix dotnet/corefx 40578
Signed-off-by: dotnet-bot <[email protected]>
* Remove dead Boehm code.
Unity looked similarly dead.
The key points making it dead were:
create_allocator:
g_assert_not_reached() covering everything but local variables
mono_gc_get_managed_allocator:
always returning NULL, killing a bunch of code
after it
mono_gc_is_critical_method:
looking at data that was never filled in
This should have no impact, not even on Boehm.
Boehm should continue working just the same.
It is nice because it is the few/only uses of CEE_MONO_TLS.
- It _presumably_ means nothing on 32bit ARM and 32bit MIPS (was there mono/mips64?).
- Leaving only PowerPC32 and PowerPC64 (in this vicinity).
- It presumably means nothing on PowerPC32.
- Leaving PowerPC64 as the only user in this vicinity -- is it needed?
- Notice this is varyingly absent on x86, arm64, amd64, s390x.
Subject of another PR maybe.
Perhaps this was to enable the debugger to be 32bit against a 64bit target
on a biarch system, so it could do a cross-process manipulation of these pages?
That makes some sense on Windows at least.
(32bit debugger cannot debug 64bit target as of Vista, but that is using the Win32
"hard" debugger API. Mono could do otherwise).
There remains amd64 mono-codeman.c define ARCH_MAP_FLAGS MONO_MMAP_32BIT left alone.
LLVM eagerly optimizes constants such as NaN in a way that does not align with .NET behaviour. In the future we can change it so that we only do opcode emulation when LLVM is used.
Fixes https://github.com/mono/mono/issues/16411
* Fix Abbreviated Genitive Month Names Parsing
In 3.0 we have fixed the formatting to use the abbreviated genitive month names when having "d" format specifier followed by "MMM". This fix is good as original formatting specs required but we needed to support the parsing when we have such genitive names.
* Addressing the feedback
Signed-off-by: dotnet-bot <[email protected]>
While working on stack reduction, I believe I found that
the compiler could not tell how THROW_EX and/or NULL_CHECK terminate.
That is, essentially, the success paths preserve volatile registers.
They do not have to be spilled/filled.
This tweak should make it clearer to the compiler, optimized common paths, and not slow down uncommon paths.
This also cleans it up a little and reduces macro expansion, and then possibly should allow for reinlining what is now used only once.
Also add some const so it can be casted away less.
Believed to save 32 bytes of stack with Linux/amd64/clang, nothing for gcc.
And a nice cleanup.
Several SGEN_LOG entries logged usec based on result returend from TV_ELAPSED.
On SGEN's implementation of TV_ELAPSED, the result is not scaled to usec
but returned as 100ns ticks. This was not handled correctly by SGEN_LOG,
but other measures, like profile counters and SGEN binary protocol handles
it correctly.
Fix will adjust the SGEN_LOG calls currently presenting usec to correctly
scale the result. Fix also adds one additional logging measuring total
amount of time spend scanning thread data.
- Chunks do not need flags, only codemanagers do.
- Sort by size to minimize padding for alignment.
- Booleans only need one bit.
- Chunk is not spelled chunck.
- Suggest foo accessors be named foo() and set_foo(), not get_foo() and set_foo().
i.e. the more common "get" is implied.
- Allow free(0) w/o initialization.
LLVM lowering passes vt as reference to managed methods. On platforms where
the value type ABI is passing an address to the value type, either in register
or on stack (Windows x64) we must make sure we always use a temporary of
the value type or we will be breaking the value type semantics.
In JIT lowering of OP_OUTARG_VT we always make sure we use a temporary
in cases where argument storage is set to ArgValuetypeAddrInIReg/ArgValuetypeAddrOnStack.
On LLVM lowering this was currently not the case, but it still worked in many scenarios.
This was because IL load of arguments before doing a call did a
local copy and then we pass that byref. However, there are cases where this
copy could get optimized away and when that happens, we will change the
local value type in the caller’s frame, breaking the value type semantics.
Added test case in winx64structs hits such a scenario that will generate IL
breaking the value type semantics before the fix:
...
notail call monocc void @winx64_vector3Struct_Add_winx64_vector3Struct_winx64_vector3Struct
(i64 %49, %winx64_vector3Struct* %3, %winx64_vector3Struct* %16)
...
notail call monocc void @winx64_vector3Struct_Add_winx64_vector3Struct_winx64_vector3Struct
(i64 %64, %winx64_vector3Struct* %3, %winx64_vector3Struct* %15)
...
The two add calls will use the same reference (to a local value type in caller frame)
on both calls, this will break the value type semantics since they should both
be temporaries, like second argument is.
After the fix, the same code will be lowered into:
...
notail call monocc void @winx64_vector3Struct_Add_winx64_vector3Struct_winx64_vector3Struct
(i64 %55, %winx64_vector3Struct* %19, %winx64_vector3Struct* %18)
...
notail call monocc void @winx64_vector3Struct_Add_winx64_vector3Struct_winx64_vector3Struct
(i64 %72, %winx64_vector3Struct* %16, %winx64_vector3Struct* %15)
...
Each argument gets its own temporary that, according to the ABI, gets passed
by address down to function.
There will be situations where we could end up with two temporaries, one from
the load and one from the lowering of OP_LLVM_OUTARG_VT (same as we get on JIT),
this will however be detected by LLVM optimization pass, removing one of the copies.
2019-08-14 19:23:32 +02:00
1248 changed files with 33116 additions and 29082 deletions
SUBDIRS=$(build_with_msvc) mk po $(libgc_dir) llvm mono $(ikvm_native_dir) support data runtime scripts man samples $(tools_dir)$(build_without_msvc)$(docs_dir) acceptance-tests
endif
# Keep in sync with SUBDIRS
DIST_SUBDIRS=$(build_with_msvc) m4 mk po $(libgc_dir) llvm mono ikvm-native support data runtime scripts man samples tools $(build_without_msvc) docs acceptance-tests netcore
DIST_SUBDIRS=$(build_with_msvc) m4 mk po $(libgc_dir) llvm mono ikvm-native support data runtime scripts man samples tools $(build_without_msvc) docs acceptance-tests netcore netcore/corerun
AC_DEFINE(ENABLE_COPY_STACK_DATA,1,[Enable copy_stack_data feature for hybrid/cooperative suspend scenarios])
fi
dnl End of Copy stack data support
dnl ***************************
dnl *** feature experiments ***
dnl ***************************
@@ -6009,6 +6010,15 @@ AC_DEFINE(MONO_INSIDE_RUNTIME,1, [Disable banned functions from being used by th
mono_build_root=`pwd`
AC_SUBST(mono_build_root)
AC_ARG_ENABLE(msvc_only,[ --enable-msvc-only Build only with Visual Studio (msvc) (defaults to no). Disable gcc build.], enable_msvc_only=$enableval, enable_msvc_only=no)
if test x$host_win32 = xno; then
if test x$enable_msvc_only = xyes; then
echo "Error, --enable-msvc-only only supported for Windows builds."
exit 1
fi
fi
AM_CONDITIONAL(ENABLE_MSVC_ONLY, test x$enable_msvc_only = xyes)
AC_ARG_ENABLE(msvc,[ --enable-msvc Build with Visual Studio (msvc) (defaults to no)], enable_msvc=$enableval, enable_msvc=no)
if test x$host_win32 = xno; then
if test x$enable_msvc = xyes; then
@@ -6016,6 +6026,9 @@ if test x$host_win32 = xno; then
exit 1
fi
fi
if test x$enable_msvc_only = xyes; then
enable_msvc=yes
fi
AM_CONDITIONAL(ENABLE_MSVC, test x$enable_msvc = xyes)
Loaded 100 of 1248 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.