Compare commits

..
125 Commits
Author SHA1 Message Date
monojenkinsandAleksey Kliger 1d0d939dc3 [2019-10] [corlib] Capture the ExceptionDispatchInfo when rethrowing from TaskContinuation (#19210)
* [corlib] Capture the ExceptionDispatchInfo when rethrowing from TaskContinuation

In `task.GetAwaiter().OnCompleted(action)` if `action` throws, the
`TaskContinuation.RunOrScheduleAction method will catch the exception and then
call `RuntimeAugments.ReportUnhandledException`.  We must not simply throw the
exception again - in that case we will lose all the frames leading up to the
`catch` in `RunOrScheduleAction`.  Instead use ExceptionDispatchInfo to
caputure the original throw.

Addresses https://github.com/mono/mono/issues/19166

* [test] Add regression test

For annoying reasons we can't run this as a simple NUnit test because the
exception is unhandled on some arbitrary threadpool worker thread, and those
don't show up within an NUnit setup.

Additionally because the unhandled exception in the root domain would normally
terminate the application, we need to run this in a new appdomain.

Co-authored-by: Aleksey Kliger <[email protected]>
2020-03-12 21:56:08 -04:00
monojenkins d10cbf8993 [2019-10] [merp] Capture Environment.FailFast message in crash report (#19067)
[2019-10] [merp] Capture Environment.FailFast message in crash report

If the process calls `System.Environment.FailFast (message, exception)` we should capture the message in the crash report log.

Backport of #18920 (which is a handwritten backport of #18863)

/cc @lambdageek @monojenkins
2020-02-28 14:46:06 -05:00
Alexander Köplinger fb4d8f5eb1 Bump bockbuild for Pango nil check fix
Pango nil check fix: https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1069059/

Brings in https://github.com/mono/bockbuild/pull/153

Backport of https://github.com/mono/mono/pull/18936
2020-02-24 19:46:18 +01:00
Ankit Jain eec411c38f [2019-10] Bump msbuild to track mono-2019-10 (#18989) 2020-02-24 19:42:15 +01:00
monojenkinsandEgor Bogatov 387bb6f8f2 Remove TestEnvVarSwitchForInnerHttpHandler test as it should be in XA/LinkerTests.cs instead (#18954)
Co-authored-by: Egor Bogatov <[email protected]>
2020-02-20 11:11:17 +01:00
Marius Ungureanu c0c5c78e2b Bump bockbuild to bring in Gtk# regression fix (#18912)
Backport of https://github.com/mono/mono/pull/18909
2020-02-18 19:45:36 +01:00
monojenkinsandEgor Bogatov a644983ae8 [2019-10] Make MonoWebRequestHandler linker friendly (#18835)
* Make MonoWebRequestHandler linker friendly

* Make MonoWebRequestHandler's ctor public (to be able to use in Activator.CreateInstance without binding flags)

* Update HttpClientHandler.SocketsHandler.Android.cs

* Update HttpClient.android.cs

Co-authored-by: Egor Bogatov <[email protected]>
2020-02-18 15:54:57 +03:00
monojenkinsandEgor Bogatov 85f47fae28 Move HttpClientHandlerTests.Android.cs to nunit (#18888)
Co-authored-by: Egor Bogatov <[email protected]>
2020-02-18 15:54:39 +03:00
Ankit Jain 26afa2d5bb [2019-10] Bump msbuild to track mono-2019-10 (#18861)
- Changes roslyn to `3.5.0-beta2-20074-05`
2020-02-17 12:39:31 +01:00
e5f0d5d928 [2019-10] [merp] Increase buffer size for state dump (#18838)
* [merp] Increase buffer size for state dump

Addresses https://github.com/mono/mono/issues/18796

* fix indentation

Co-authored-by: Alexis Christoforides <[email protected]>
Co-authored-by: Aleksey Kliger (λgeek) <[email protected]>
2020-02-15 17:12:05 -05:00
Alexander Köplinger e60eabc767 Move offsets-tool into mono/tools (#18783) (#18831)
Backporting this since we see errors during `pip install` on the Android Mono SDKs build on Linux and with this we're removing the call to pip (it wasn't needed).

Backport of #18783.
2020-02-13 16:01:06 +01:00
Ankit Jain 7a59bf3ea5 [2019-10] Bump msbuild to track mono-2019-10 (#18791)
* [2019-10] Bump msbuild to track mono-2019-10

* Bump roslyn to 3.5.0-beta3-20111-03 .

* Update nuget.exe to match xbuild

- the closest version available right now, to `5.5.0-rtm.6422` is
`5.5.0-preview2`, so using that for now.
2020-02-12 17:13:00 +01:00
monojenkins 47bb780c8d [2019-10] Allow users to switch to MonoWebRequestHandler on Android via UI (#18787)
* Bring back old HttpHandler for Android
Co-authored-by: Egor Bogatov <[email protected]>
2020-02-12 16:23:58 +03:00
Alexander Köplinger d6f592717e Bump bockbuild to get GTK NSPasteboardType change.
Backport from https://github.com/mono/mono/pull/18080
2020-02-10 16:23:03 +01:00
Matt Sylvia 1ee12f8625 Update deprecated query parameter to header (#18705)
Use of `access_token` is now deprecated, switching to HTTP header

```
Please use the Authorization HTTP header instead, as using the `access_token` query parameter is deprecated.
```

(cherry picked from commit 2f74ab393f)
2020-02-08 19:22:04 +01:00
monojenkinsandAlex Soto 8720142834 [iOS] Replace removed dsymutil -t switch with -num-threads (#18743)
Apple removed `-t` switch from dsymutil in favor of `-num-threads`

Co-authored-by: Alex Soto <[email protected]>
2020-02-07 11:13:42 +01:00
Alexander Köplinger 83c161f276 Skip WebAssembly build in sdks archive build on non-master branches
WebAssembly doesn't use our usual release branches yet.

(cherry picked from commit a40e1ae681)
2020-02-06 22:39:43 +01:00
monojenkinsandAlexis Christoforides 0e18125d71 [merp] Add an exception type for managed exceptions (#18722)
Addresses https://github.com/mono/mono/issues/18681

Co-authored-by: Alexis Christoforides <[email protected]>
2020-02-06 16:20:46 -05:00
vargaz 82fffe0749 [runtime] Disable lldb backtrace display on osx, it hangs on attaching in lldb. 2020-02-04 15:00:59 +01:00
Alexander Köplinger 1cca0cfebf Bump bockbuild for Pango patch
Fixes bug #1048838, correct SF font not loading in VSMac

Backport of https://github.com/mono/mono/pull/18566
2020-01-28 13:15:19 +01:00
monojenkinsandAlexander Köplinger b216675706 configure.ac: remove AC_SEARCH_LIBS for libintl (#18596)
This causes an additional dependency of mono on libintl which we didn't have before.
Reported by a user on gitter, it's problematic on macOS since it makes the mono binary depend on the libintl we ship in the Mono .pkg.

It was introduced in Mono 6.6 by https://github.com/mono/mono/commit/18e0ebfe89be0a175d2f904b9bb1ec6816daa318

Co-authored-by: Alexander Köplinger <[email protected]>
2020-01-27 17:03:02 +01:00
Ankit Jain c0a5db5f82 [2019-10] Bump msbuild to track mono-2019-10 (#18576) 2020-01-27 10:55:30 +01:00
monojenkinsandThays Grazia 9ce68dc791 [2019-10] [debugger] Native thread not executing managed code considered as terminated (#18503)
* If a thread was suspended and doesn't have any managed stack, it was considered as terminated, but it wasn't really terminated because it can execute managed code again, and stop in a breakpoint so if the execution arrives in debugger_agent_breakpoint_from_context we reset the flag terminated to FALSE.

* Adding terminated = FALSE in single_step_from_context.

Co-authored-by: Thays Grazia <[email protected]>
2020-01-24 12:45:58 -03:00
monojenkinsandBernhard Urban-Forster ea94456156 [interp] context can be uninitialized for get_resume_state callback (#18536)
`jit_tls->interp_context` gets initialized lazily, that is, upon the first interpreter execution on a specific thread (e.g. via interp_runtime_invoke). However, with mixed mode the execution can purely happen in AOT code upon the first interaction with the managed debugger.

Stack trace:

```
  thread #1, name = 'tid_407', queue = 'com.apple.main-thread'
    frame #0: 0x0000000190aedc94 libsystem_kernel.dylib`__psynch_cvwait + 8
    frame #1: 0x0000000190a0f094 libsystem_pthread.dylib`_pthread_cond_wait$VARIANT$armv81 + 672
    frame #2: 0x000000010431318c reloadcontext.iOS`mono_os_cond_wait(cond=0x0000000104b9ba78, mutex=0x0000000104b9ba30) at mono-os-mutex.h:219:8
    frame #3: 0x0000000104312a68 reloadcontext.iOS`mono_coop_cond_wait(cond=0x0000000104b9ba78, mutex=0x0000000104b9ba30) at mono-coop-mutex.h:91:2
    frame #4: 0x0000000104312858 reloadcontext.iOS`suspend_current at debugger-agent.c:3021:4
    frame #5: 0x000000010431be18 reloadcontext.iOS`process_event(event=EVENT_KIND_BREAKPOINT, arg=0x0000000145d09ae8, il_offset=0, ctx=0x0000000149015c20, events=0x0000000000000000, suspend_policy=2) at debugger-agent.c:4058:3
    frame #6: 0x0000000104310cf4 reloadcontext.iOS`process_breakpoint_events(_evts=0x000000028351a680, method=0x0000000145d09ae8, ctx=0x0000000149015c20, il_offset=0) at debugger-agent.c:4722:3
    frame #7: 0x000000010432f1c8 reloadcontext.iOS`mono_de_process_breakpoint(void_tls=0x0000000149014e00, from_signal=0) at debugger-engine.c:1141:2
    frame #8: 0x000000010430f238 reloadcontext.iOS`debugger_agent_breakpoint_from_context(ctx=0x000000016f656790) at debugger-agent.c:4938:2
    frame #9: 0x00000001011b73a4 reloadcontext.iOS`sdb_breakpoint_trampoline + 148
    frame #10: 0x00000001008511b4 reloadcontext.iOS`reloadcontext_iOS_Application_Main_string__(args=0x000000010703a030) at Main.cs:14
    frame #11: 0x00000001010f9730 reloadcontext.iOS`wrapper_runtime_invoke_object_runtime_invoke_dynamic_intptr_intptr_intptr_intptr + 272
    frame #12: 0x00000001042fd8b8 reloadcontext.iOS`mono_jit_runtime_invoke(method=0x0000000145d09ae8, obj=0x0000000000000000, params=0x000000016f656f20, exc=0x0000000000000000, error=0x000000016f656ff8) at mini-runtime.c:3162:3
    frame #13: 0x0000000104411950 reloadcontext.iOS`do_runtime_invoke(method=0x0000000145d09ae8, obj=0x0000000000000000, params=0x000000016f656f20, exc=0x0000000000000000, error=0x000000016f656ff8) at object.c:3052:11
    frame #14: 0x000000010440c4dc reloadcontext.iOS`mono_runtime_invoke_checked(method=0x0000000145d09ae8, obj=0x0000000000000000, params=0x000000016f656f20, error=0x000000016f656ff8) at object.c:3220:9
    frame #15: 0x0000000104415ae0 reloadcontext.iOS`do_exec_main_checked(method=0x0000000145d09ae8, args=0x000000010703a030, error=0x000000016f656ff8) at object.c:5184:3
    frame #16: 0x00000001044144ac reloadcontext.iOS`mono_runtime_exec_main_checked(method=0x0000000145d09ae8, args=0x000000010703a030, error=0x000000016f656ff8) at object.c:5281:9
    frame #17: 0x0000000104414500 reloadcontext.iOS`mono_runtime_run_main_checked(method=0x0000000145d09ae8, argc=1, argv=0x000000016f6570d0, error=0x000000016f656ff8) at object.c:4734:9
    frame #18: 0x00000001042d3b54 reloadcontext.iOS`mono_jit_exec_internal(domain=0x0000000145f00130, assembly=0x0000000281ba2900, argc=1, argv=0x000000016f6570d0) at driver.c:1320:13
    frame #19: 0x00000001042d39a4 reloadcontext.iOS`mono_jit_exec(domain=0x0000000145f00130, assembly=0x0000000281ba2900, argc=1, argv=0x000000016f6570d0) at driver.c:1265:7
    frame #20: 0x0000000104597994 reloadcontext.iOS`::xamarin_main(argc=5, argv=0x000000016f657a80, launch_mode=XamarinLaunchModeApp) at monotouch-main.m:483:8
    frame #21: 0x00000001008510dc reloadcontext.iOS`main(argc=5, argv=0x000000016f657a80) at main.m:104:11
    frame #22: 0x0000000190af8360 libdyld.dylib`start + 4
[...]
* thread #5, name = 'Debugger agent', stop reason = signal SIGABRT
  * frame #0: 0x0000000190aedec4 libsystem_kernel.dylib`__pthread_kill + 8
    frame #1: 0x0000000190a0d724 libsystem_pthread.dylib`pthread_kill$VARIANT$armv81 + 216
    frame #2: 0x000000019095d844 libsystem_c.dylib`abort + 100
    frame #3: 0x00000001045871b4 reloadcontext.iOS`log_callback(log_domain=0x0000000000000000, log_level="error", message="* Assertion at ../../../../../mono/mini/interp/interp.c:7176, condition `context' not met\n", fatal=4, user_data=0x0000000000000000) at runtime.m:1213:3
    frame #4: 0x0000000104544fc8 reloadcontext.iOS`eglib_log_adapter(log_domain=0x0000000000000000, log_level=G_LOG_LEVEL_ERROR, message="* Assertion at ../../../../../mono/mini/interp/interp.c:7176, condition `context' not met\n", user_data=0x0000000000000000) at mono-logger.c:405:2
    frame #5: 0x000000010456093c reloadcontext.iOS`monoeg_g_logstr(log_domain=0x0000000000000000, log_level=G_LOG_LEVEL_ERROR, msg="* Assertion at ../../../../../mono/mini/interp/interp.c:7176, condition `context' not met\n") at goutput.c:134:2
    frame #6: 0x0000000104560598 reloadcontext.iOS`monoeg_g_logv_nofree(log_domain=0x0000000000000000, log_level=G_LOG_LEVEL_ERROR, format="* Assertion at %s:%d, condition `%s' not met\n", args="e\x12z\x04\x01") at goutput.c:149:2
    frame #7: 0x000000010456061c reloadcontext.iOS`monoeg_assertion_message(format="* Assertion at %s:%d, condition `%s' not met\n") at goutput.c:184:22
    frame #8: 0x0000000104560674 reloadcontext.iOS`mono_assertion_message(file="../../../../../mono/mini/interp/interp.c", line=7176, condition="context") at goutput.c:203:2
    frame #9: 0x000000010459b570 reloadcontext.iOS`interp_get_resume_state(jit_tls=0x000000014900d000, has_resume_state=0x000000016fc7a9f4, interp_frame=0x000000016fc7a9e8, handler_ip=0x000000016fc7a9e0) at interp.c:7176:2
    frame #10: 0x0000000104319420 reloadcontext.iOS`compute_frame_info(thread=0x0000000104fe4130, tls=0x0000000149014e00, force_update=1) at debugger-agent.c:3422:3
    frame #11: 0x0000000104320d40 reloadcontext.iOS`thread_commands(command=1, p="", end="", buf=0x000000016fc7acf8) at debugger-agent.c:9048:3
    frame #12: 0x000000010431cca0 reloadcontext.iOS`debugger_thread(arg=0x0000000000000000) at debugger-agent.c:10132:10
    frame #13: 0x000000010447eb04 reloadcontext.iOS`start_wrapper_internal(start_info=0x0000000000000000, stack_ptr=0x000000016fc7b000) at threads.c:1232:3
    frame #14: 0x000000010447e788 reloadcontext.iOS`start_wrapper(data=0x000000028203ef40) at threads.c:1305:8
    frame #15: 0x0000000190a11d8c libsystem_pthread.dylib`_pthread_start + 15
[...]
```

Thanks to @drasticactions for helping me to reproduce.

Fixes https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1050615

Co-authored-by: Bernhard Urban-Forster <[email protected]>
2020-01-24 11:45:36 +01:00
monojenkinsandAlexander Köplinger 1182f8cbf5 Bump xsp to fix issues with removed Mono.Security APIs (#18486)
See https://github.com/mono/xsp/pull/88

Co-authored-by: Alexander Köplinger <[email protected]>
2020-01-16 21:51:39 +01:00
monojenkins 448e7ee959 [2019-10] [arm] account for signed bit when calculating offset to PLT entry (#18461)
[2019-10] [arm] account for signed bit when calculating offset to PLT entry

See `bl` documentation (make sure you look at the thumb2 one):
<img width="1003" alt="Screenshot 2020-01-14 at 22 43 33" src="https://user-images.githubusercontent.com/75403/72385601-2bb53b00-3720-11ea-9858-d73bc2d02a7e.png">


Fixes https://github.com/mono/mono/issues/18247

Backport of #18454.

/cc @lewurm
2020-01-16 10:37:03 +01:00
monojenkinsandAleksey Kliger f5eff7fa86 [2019-10] [loader] ReflectionOnlyLoad(byte[]) should not apply binding redirects (#18459)
* [loader] ReflectionOnlyLoad(byte[]) should not apply binding redirects

Match .NET Framework behavior.

Addresses https://github.com/mono/mono/issues/18388

* [tests] ReflectionOnlyLoad(byte[]) should not apply binding redirects

Regression test for https://github.com/mono/mono/issues/18388

Co-authored-by: Aleksey Kliger (λgeek) <[email protected]>
2020-01-15 10:48:22 +01:00
Ankit Jain a3c4b143a9 [2019-10] Bump msbuild to track mono-2019-10 (#18434) 2020-01-12 10:55:38 +01:00
Ankit Jain 41f9a07d3d [2019-10] Bump msbuild to track mono-2019-10 (#18414) 2020-01-10 12:41:50 +01:00
Martin Baulig 7a4a1ab42a [2019-10]: Bump CoreFX to latest mono-2019-10. (#18406) 2020-01-10 00:14:50 +01:00
Ankit Jain 4019940aaa [2019-10] Bump msbuild to track mono-2019-10 (#18393) 2020-01-09 22:17:42 +01:00
Ankit Jain ca47edd56d [2019-10] Bump msbuild to track mono-2019-10 (#18374) 2020-01-08 14:58:27 +01:00
monojenkins 6a246d0940 [2019-10] [jit] Avoid passing a vtable argument to DIM methods when making calls out of gsharedvt methods. (#18366)
* [jit] Avoid passing a vtable argument to DIM methods when making calls out of gsharedvt methods.

Fixes https://github.com/mono/mono/issues/18276.
2020-01-07 17:29:14 -05:00
imhameed 398bb16a40 [2019-10] Use byte-aligned LLVM loads and stores for unaligned mini IR loads and stores. (#18369)
Should fix https://github.com/mono/mono/issues/18221.

Backport of #18296.
2020-01-07 14:09:19 -08:00
Ankit Jain b38f2038ec [2019-10] Bump msbuild to track mono-2019-10 (#18259)
* Bump msbuild to track mono-2019-10

- update nuget.exe to 5.5.0-preview1 to match
2020-01-07 18:13:28 +01:00
monojenkins 2bb369f036 [2019-10] Add SignedCms to the TypeForwards in the System.Security.Cryptography.Pkcs facade (#18363)
* Add SignedCms to the typeforwards in the System.Security.Cryptography.Pkcs facade

* Added additional missing types from System.Security.Cryptography.Pkcs.

* It would be nice if the files I added had namespaces ;-)

* [csproj] Update project files

* Bump API snapshot submodule
2020-01-07 18:08:10 +01:00
Alexis Christoforides df42020fe6 [FileSystemWatcher] Fix wrong behaviour when move multiple files out of watched folder on mac (#41963) (#18224)
Backport of  https://github.com/dotnet/corefx/pull/41963


Fixes https://github.com/mono/mono/issues/16778

corefx PR: mono/corefx#385
2020-01-06 16:05:42 -05:00
monojenkins 2faea92a92 [2019-10] [metadata] Size 0 Blob heap is ok when resolving assembly refs (#18338)
* [metadata] Size 0 Blob heap is ok when resolving assembly refs

Sometimes ILasm can produce images with a Blob heap of size 0.  In cases where
we're loading assembly references from such an image, the hash (which is
optional) can be at index = 0 and the Blob heap size is also 0.

Also: add the hash value to the output of `monodis --assemblyref`

* [metadata] Add a separate assertion for the index == size == 0 case

And a comment explaining how it is likely to be triggered.  If the assembly is
reasonable the caller of mono_metadata_blob_heap should be updated to use
mono_metadata_blob_heap_null_ok instead

* [bcl] Allow Mono's ILASM to produce a size 0 Blob heap

ECMA 335 II.24.2.4 says that the user string and blob heaps should have an
entry at index 0 consisting of the single byte 0.  However .NET Framework (and
.NET Core) ilasm will entirely omit the Blob heap (that is, create a blob heap
entry of size 0) if it is not needed.  This PR changes Mono's ILASM to emit the
initial byte on demand only if one of the MetaDataStream.Add() methods is
called. Otherwise we will also emit a stream of size 0.

This is needed to compile some test cases.

* [tests] Add regression test for loading assemblies with size 0 Blob heap

Depends on ILASM that can emit a size 0 Blob heap
2020-01-06 16:03:08 -05:00
monojenkinsandMartin Baulig 99e3aed6ec Socket.BeginMConnect() should not attempt connections on unsupported address families. (#18321)
Fixes #16513.

Co-authored-by: Martin Baulig <[email protected]>
2020-01-01 17:32:16 -05:00
monojenkins 5f0704ce37 [eglib] Don't define _FORTIFY_SOURCE on Cygwin builds (#18312)
See https://github.com/msys2/MINGW-packages/issues/5803

Without -lssp (or -fstack-protector), -D_FORTIFY_SOURCE=2 leads to linker
errors.
2019-12-30 09:54:37 -05:00
monojenkins dc5902c243 [domain] Don't add NULL runtime to runtimes list (#18265)
Also when iterating over the runtimes, actually look at the current element,
not the first element.

Also mention the unsupported runtime version in the warning message when it is
passed to mono_init_internal.

Fixes https://github.com/mono/mono/issues/17916
2019-12-23 08:41:55 -05:00
Alexander Köplinger bfcac9bd30 Bump corefx to get test fix 2019-12-20 00:35:57 +01:00
Alexander Köplinger d56a0e72c2 [System] Add additional hardening against race in MonoTlsStream (#18250)
See https://github.com/mono/mono/issues/15805#issuecomment-567131297

(cherry picked from commit c8e19bec68)
2019-12-19 11:58:16 +01:00
Alexander Köplinger 9325d96ca3 [bcl] Split corlib and System.Core xunit test assemblies for monotouch profiles (#18228)
They cannot deal with large test assemblies so we need to split them.

We're doing this by introducing a new `#skip <PROFILE>` directive in the .sources format which defines where to split the assembly.
The logic is very simple: files up until the first `#skip` are common files which get included in each part, subsequent files are only in the respective part assembly.

Fixes https://github.com/mono/mono/issues/18213

(cherry picked from commit 3891fe97d2)
(cherry picked from commit a74416d950)
2019-12-18 22:33:30 +01:00
Ankit Jain 7e31b36d0d Bump msbuild to track mono-2019-10 (#18194)
.. to get changes from https://github.com/mono/msbuild/pull/184 .
2019-12-18 16:48:52 +01:00
monojenkins 8f396bbb40 [2019-10] [cominterop] Attach to runtime from IUnknown and IDispatch methods (#18186)
* [cominterop][test] Calling QueryInterface from an unattached thread asserts

If we pass a managed COM object to native code and the native code calls one of
the IUnknown methods, we assert because the thread is not attached but we want
to enter GC Unsafe mode.

* [cominterop] Attach to runtime from IUnkown and IDispatch methods

If the COM objects for a managed object is passed to a thread that hasn't
interacted with Mono before, we need to attach before doing GC thread state
transitions.

Addresses https://github.com/mono/mono/issues/18137

* [test] Call managed method through COM wrapper from unattached thread

This works, but I don't think we had a test previously.  Call a managed method
via a COM interface from a thread that is not attached to the runtime, to
ensure that it is attached.
2019-12-16 19:45:21 -05:00
Alexander Köplinger 25f7937972 [sdks] Use Xcode 11.3 stable version for iOS/Mac SDKs
As requested by the xamarin-macios team.

(cherry picked from commit 7e65a73d4d)
2019-12-13 18:14:49 +01:00
Ankit Jain 9bcfa60312 [2019-10] Bump msbuild to track mono-2019-10 (#18132)
* Bump msbuild to track mono-2019-10

* [2019-10] Bump msbuild to track mono-2019-10

* [2019-10] Bump msbuild to track mono-2019-10
2019-12-12 04:58:33 -05:00
monojenkins e6cd9a15cd [2019-10] [mini] Fix delegate trampoline virtual call via delgate Invoke (#18115)
[2019-10] [mini] Fix delegate trampoline virtual call via delgate Invoke

If we need to jit the Invoke method of a delegate, we get `tramp_info` with a
NULL method.

Background: normally when we create a delegate around a virtual method,
`handle_delegate_ctor` will just create a virtual invoke trampoline with
`mono_arch_get_delegate_virtual_invoke_impl` which doesn't get here.  But if
we're asked to compile the delegate's `Invoke` method, then `compile_special ()`
will create a `tramp_info` with a null method, and return a delegate trampoline.

That's the case here - we had
```
  var del = SomeDelegate(obj.VirtualMethod);
  var invoke_method = del.GetType().GetMethod ("Invoke");
  invoke_method.Invoke (del, args);
```
or
```
  var del = SomeDelegate(obj.VirtualMethod);
  var another_del = OtherDelegate (del.Invoke);
  another_del (args);
```

in both cases, we end up in mono_delegate_trampoline with `tramp_info->method == NULL`.

in the second case the IL is like this:
```
   newobj instance void Derived::'.ctor'
   ldvirtftn instance void class Base::VirtualMethod()
   newobj instance void class SomeDelegate::'.ctor'(object, native int)
```

So `delegate->target` is a derived instance but `delegate->method` is some base
class method.

Addresses https://github.com/mono/mono/issues/17718



Backport of #18073.

/cc @lambdageek
2019-12-11 00:35:54 +01:00
monojenkins 7c95e4bc48 [debugger] skip suspend for unattached threads (#18111)
When the debugger tries to suspend all the VM threads, it can happen with cooperative-suspend that it tries to suspend a thread that has previously been attached, but then did a "light" detach (that only unsets the domain). With the domain set to `NULL`, looking up a JitInfo for a given `ip` will result into a crash, but it isn't even necessarily needed for the purpose of suspending a thread.

More details: Consider the following:
```
(lldb) c
error: Process is running.  Use 'process interrupt' to pause execution.
Process 12832 stopped
* thread #9, name = 'tid_a31f', queue = 'NSOperationQueue 0x8069b670 (QOS: UTILITY)', stop reason = breakpoint 1.1
    frame #0: 0x00222870 WatchWCSessionAppWatchOSExtension`debugger_interrupt_critical(info=0x81365400, user_data=0xb04dc718) at debugger-agent.c:2716:6
   2713         MonoDomain *domain = (MonoDomain *) mono_thread_info_get_suspend_state (info)->unwind_data [MONO_UNWIND_DATA_DOMAIN];
   2714         if (!domain) {
   2715                 /* not attached */
-> 2716                 ji = NULL;
   2717         } else {
   2718                 ji = mono_jit_info_table_find_internal ( domain, MONO_CONTEXT_GET_IP (&mono_thread_info_get_suspend_state (info)->ctx), TRUE, TRUE);
   2719         }
Target 0: (WatchWCSessionAppWatchOSExtension) stopped.
(lldb) bt
* thread #9, name = 'tid_a31f', queue = 'NSOperationQueue 0x8069b670 (QOS: UTILITY)', stop reason = breakpoint 1.1
  * frame #0: 0x00222870 WatchWCSessionAppWatchOSExtension`debugger_interrupt_critical(info=0x81365400, user_data=0xb04dc718) at debugger-agent.c:2716:6
    frame #1: 0x004e177b WatchWCSessionAppWatchOSExtension`mono_thread_info_safe_suspend_and_run(id=0xb0767000, interrupt_kernel=0, callback=(WatchWCSessionAppWatchOSExtension`debugger_interrupt_critical at debugger-agent.c:2708), user_data=0xb04dc718) at mono-threads.c:1358:19
    frame #2: 0x00222799 WatchWCSessionAppWatchOSExtension`notify_thread(key=0x03994508, value=0x81378c00, user_data=0x00000000) at debugger-agent.c:2747:2
    frame #3: 0x00355bd8 WatchWCSessionAppWatchOSExtension`mono_g_hash_table_foreach(hash=0x8007b4e0, func=(WatchWCSessionAppWatchOSExtension`notify_thread at debugger-agent.c:2733), user_data=0x00000000) at mono-hash.c:310:4
    frame #4: 0x0021e955 WatchWCSessionAppWatchOSExtension`suspend_vm at debugger-agent.c:2844:3
    frame #5: 0x00225ff0 WatchWCSessionAppWatchOSExtension`process_event(event=EVENT_KIND_THREAD_START, arg=0x039945d0, il_offset=0, ctx=0x00000000, events=0x805b28e0, suspend_policy=2) at debugger-agent.c:4012:3
    frame #6: 0x00227c7c WatchWCSessionAppWatchOSExtension`process_profiler_event(event=EVENT_KIND_THREAD_START, arg=0x039945d0) at debugger-agent.c:4072:2
    frame #7: 0x0021b174 WatchWCSessionAppWatchOSExtension`thread_startup(prof=0x00000000, tid=2957889536) at debugger-agent.c:4149:2
    frame #8: 0x0037912d WatchWCSessionAppWatchOSExtension`mono_profiler_raise_thread_started(tid=2957889536) at profiler-events.h:103:1
    frame #9: 0x003d53da WatchWCSessionAppWatchOSExtension`fire_attach_profiler_events(tid=0xb04dd000) at threads.c:1120:2
    frame #10: 0x003d4d83 WatchWCSessionAppWatchOSExtension`mono_thread_attach(domain=0x801750a0) at threads.c:1547:2
    frame #11: 0x003df1a1 WatchWCSessionAppWatchOSExtension`mono_threads_attach_coop_internal(domain=0x801750a0, cookie=0xb04dcc0c, stackdata=0xb04dcba8) at threads.c:6008:3
    frame #12: 0x003df287 WatchWCSessionAppWatchOSExtension`mono_threads_attach_coop(domain=0x00000000, dummy=0xb04dcc0c) at threads.c:6045:9
    frame #13: 0x005034b8 WatchWCSessionAppWatchOSExtension`::xamarin_switch_gchandle(self=0x80762c20, to_weak=false) at runtime.m:1805:2
    frame #14: 0x005065c1 WatchWCSessionAppWatchOSExtension`::xamarin_retain_trampoline(self=0x80762c20, sel="retain") at trampolines.m:693:2
    frame #15: 0x657ea520 libobjc.A.dylib`objc_retain + 64
    frame #16: 0x4b4d9caa WatchConnectivity`__66-[WCSession onqueue_handleDictionaryMessageRequest:withPairingID:]_block_invoke + 279
    frame #17: 0x453c7df7 Foundation`__NSBLOCKOPERATION_IS_CALLING_OUT_TO_A_BLOCK__ + 12
    frame #18: 0x453c7cf4 Foundation`-[NSBlockOperation main] + 88
    frame #19: 0x453cacee Foundation`__NSOPERATION_IS_INVOKING_MAIN__ + 27
    frame #20: 0x453c6ebd Foundation`-[NSOperation start] + 835
    frame #21: 0x453cb606 Foundation`__NSOPERATIONQUEUE_IS_STARTING_AN_OPERATION__ + 27
    frame #22: 0x453cb12e Foundation`__NSOQSchedule_f + 194
    frame #23: 0x453cb26e Foundation`____addOperations_block_invoke_4 + 20
    frame #24: 0x65de007b libdispatch.dylib`_dispatch_call_block_and_release + 15
    frame #25: 0x65de126f libdispatch.dylib`_dispatch_client_callout + 14
    frame #26: 0x65de3788 libdispatch.dylib`_dispatch_continuation_pop + 421
    frame #27: 0x65de2ee3 libdispatch.dylib`_dispatch_async_redirect_invoke + 818
    frame #28: 0x65df087d libdispatch.dylib`_dispatch_root_queue_drain + 354
    frame #29: 0x65df0ff3 libdispatch.dylib`_dispatch_worker_thread2 + 109
    frame #30: 0x66024fa0 libsystem_pthread.dylib`_pthread_wqthread + 208
    frame #31: 0x66024e44 libsystem_pthread.dylib`start_wqthread + 36
```

Going further, `info` is about this thread:
```
(lldb) p/x *(int *)(((char *) info->node.key) + 0xa0)
(int) $2 = 0x01243f93
(lldb) thread list
Process 12832 stopped
  thread #1: tid = 0x1243ee1, 0x65f7e396 libsystem_kernel.dylib`mach_msg_trap + 10, name = 'tid_303', queue = 'com.apple.main-thread'
  thread #2: tid = 0x1243ee6, 0x65f816e2 libsystem_kernel.dylib`__recvfrom + 10
  thread #3: tid = 0x1243ee7, 0x65f81aea libsystem_kernel.dylib`__psynch_cvwait + 10, name = 'SGen worker'
  thread #4: tid = 0x1243ee9, 0x65f7e3d2 libsystem_kernel.dylib`semaphore_wait_trap + 10, name = 'Finalizer'
  thread #5: tid = 0x1243eea, 0x65f816e2 libsystem_kernel.dylib`__recvfrom + 10, name = 'Debugger agent'
  thread #6: tid = 0x1243f1d, 0x65f7e396 libsystem_kernel.dylib`mach_msg_trap + 10, name = 'com.apple.uikit.eventfetch-thread'
  thread #8: tid = 0x1243f93, 0x65f7e396 libsystem_kernel.dylib`mach_msg_trap + 10, name = 'tid_6d0f', queue = 'NSOperationQueue 0x8069b300 (QOS: UTILITY)'
* thread #9: tid = 0x12443a9, 0x00222870 WatchWCSessionAppWatchOSExtension`debugger_interrupt_critical(info=0x81365400, user_data=0xb04dc718) at debugger-agent.c:2716:6, name = 'tid_a31f', queue = 'NSOperationQueue 0x8069b670 (QOS: UTILITY)', stop reason = breakpoint 1.1
  thread #10: tid = 0x1244581, 0x65f7fd32 libsystem_kernel.dylib`__workq_kernreturn + 10
(lldb) thread select 8
* thread #8, name = 'tid_6d0f', queue = 'NSOperationQueue 0x8069b300 (QOS: UTILITY)'
    frame #0: 0x65f7e396 libsystem_kernel.dylib`mach_msg_trap + 10
libsystem_kernel.dylib`mach_msg_trap:
->  0x65f7e396 <+10>: retl
    0x65f7e397 <+11>: nop

libsystem_kernel.dylib`mach_msg_overwrite_trap:
    0x65f7e398 <+0>:  movl   $0xffffffe0, %eax         ; imm = 0xFFFFFFE0
    0x65f7e39d <+5>:  calll  0x65f85f44                ; _sysenter_trap
(lldb) bt
* thread #8, name = 'tid_6d0f', queue = 'NSOperationQueue 0x8069b300 (QOS: UTILITY)'
  * frame #0: 0x65f7e396 libsystem_kernel.dylib`mach_msg_trap + 10
    frame #1: 0x65f7e8ff libsystem_kernel.dylib`mach_msg + 47
    frame #2: 0x66079679 libxpc.dylib`_xpc_send_serializer + 104
    frame #3: 0x660794da libxpc.dylib`_xpc_pipe_simpleroutine + 80
    frame #4: 0x66079852 libxpc.dylib`xpc_pipe_simpleroutine + 43
    frame #5: 0x66043a8f libsystem_trace.dylib`___os_activity_stream_reflect_block_invoke_2 + 30
    frame #6: 0x65de126f libdispatch.dylib`_dispatch_client_callout + 14
    frame #7: 0x65de3d71 libdispatch.dylib`_dispatch_block_invoke_direct + 257
    frame #8: 0x65de3c62 libdispatch.dylib`dispatch_block_perform + 112
    frame #9: 0x6604349a libsystem_trace.dylib`_os_activity_stream_reflect + 725
    frame #10: 0x6604ef19 libsystem_trace.dylib`_os_log_impl_stream + 468
    frame #11: 0x6604e44d libsystem_trace.dylib`_os_log_impl_flatten_and_send + 6410
    frame #12: 0x6604cb3b libsystem_trace.dylib`_os_log + 137
    frame #13: 0x6604f4aa libsystem_trace.dylib`_os_log_impl + 31
    frame #14: 0x4b4eb4e9 WatchConnectivity`WCSerializePayloadDictionary + 393
    frame #15: 0x4b4d7c4d WatchConnectivity`-[WCSession onqueue_sendResponseDictionary:identifier:] + 195
    frame #16: 0x4b4da435 WatchConnectivity`__66-[WCSession onqueue_handleDictionaryMessageRequest:withPairingID:]_block_invoke.411 + 35
    frame #17: 0x453c7df7 Foundation`__NSBLOCKOPERATION_IS_CALLING_OUT_TO_A_BLOCK__ + 12
    frame #18: 0x453c7cf4 Foundation`-[NSBlockOperation main] + 88
    frame #19: 0x453cacee Foundation`__NSOPERATION_IS_INVOKING_MAIN__ + 27
    frame #20: 0x453c6ebd Foundation`-[NSOperation start] + 835
    frame #21: 0x453cb606 Foundation`__NSOPERATIONQUEUE_IS_STARTING_AN_OPERATION__ + 27
    frame #22: 0x453cb12e Foundation`__NSOQSchedule_f + 194
    frame #23: 0x453cb067 Foundation`____addOperations_block_invoke_2 + 20
    frame #24: 0x65dedf49 libdispatch.dylib`_dispatch_block_async_invoke2 + 77
    frame #25: 0x65de4461 libdispatch.dylib`_dispatch_block_async_invoke_and_release + 17
    frame #26: 0x65de126f libdispatch.dylib`_dispatch_client_callout + 14
    frame #27: 0x65de3788 libdispatch.dylib`_dispatch_continuation_pop + 421
    frame #28: 0x65de2ee3 libdispatch.dylib`_dispatch_async_redirect_invoke + 818
    frame #29: 0x65df087d libdispatch.dylib`_dispatch_root_queue_drain + 354
    frame #30: 0x65df0ff3 libdispatch.dylib`_dispatch_worker_thread2 + 109
    frame #31: 0x66024fa0 libsystem_pthread.dylib`_pthread_wqthread + 208
    frame #32: 0x66024e44 libsystem_pthread.dylib`start_wqthread + 36
```
which is a thread in a "light" detach state (aka. coop detach), where we only unset the domain:
https://github.com/mono/mono/blob/4cefdcb7ce2d939ee78fb45d1b4913eb3bc064fd/mono/metadata/threads.c#L6084-L6111

Fixes https://github.com/mono/mono/issues/17926
2019-12-10 13:43:42 -05:00
Ankit Jain 77147e7526 [2019-10] Bump msbuild+roslyn to track mono-2019-10 (#18093)
* [2019-10] Bump msbuild+roslyn to track mono-2019-10

- bumps roslyn to `3.5.0-beta1-19606-04`

* roslyn: Delete reference to the now removed Microsoft.Managed.EditorConfig.targets
2019-12-10 12:40:46 +01:00
Steve Pfister d7337e5beb Bump to mono/corefx@f3815a9 (#18104)
Picks up https://github.com/mono/corefx/pull/376

Backport of https://github.com/mono/mono/pull/18090
2019-12-10 12:37:11 +01:00
monojenkins 6ac11972db [2019-10] [threads] Add back mono_threads_attach_tools_thread as a public API (#18075)
* [utils] Add back mono_threads_attach_tools_thread

In https://github.com/mono/mono/commit/a5da7b21f4b6dbc5eaa09c2addee91b84dc1dbd5
we got rid of "tools" threads internally to the runtime.

However since the API was previously marked with MONO_API it was an internal
API that some embedders depended on.

This PR adds back an (external-only) limited form of tools thread.

The runtime is aware of the Tools thread in that FOREACH_THREAD_* macros will
iterate over them, and the thread has a coop thread state machine. (That is,
mono_thread_info_current() and GC Safe and GC Unsafe transitions all work.)

However the thread is:
1. Not stopped by the GC
2. Is not interrupted by profiler sampling.
3. Does not have a "current domain"
4. (As a consequence of the above) cannot call managed methods or touch managed
objects.

Such threads are useful for low-level interaction with the runtime such as
querying metadata, the JIT state and other coordination.

mono_threads_attach_tools_thread should be called no more than once.  It should
not be called on a thread that is already attached with mono_thread_atach, and
vice versa.

Addresses https://github.com/mono/mono/issues/18011

* [threads] Make mono_threads_attach_tools_thread into a public API
2019-12-06 17:56:10 -05:00
Steve Pfister b687667619 Bump corefx to pick up https://github.com/mono/corefx/pull/370 (#18068)
* Bump corefx to pick up https://github.com/mono/corefx/pull/370

Added HAVE_LCHFLAGS & HAVE_STAT_FLAGS to configure

Backport of https://github.com/mono/mono/pull/17758

* [csproj] Update project files
2019-12-06 12:22:19 +01:00
Alexander Köplinger da605d8081 Remove DNS lookups of the local hostname in tests (#18059)
This allows us to workaround issues we currently have in the macOS bot network where DNS lookup of the hostname fails.

(cherry picked from commit 269d509e42)
2019-12-05 23:21:28 +01:00
Ankit Jain a6e867fe96 Bump msbuild to track mono-2019-10 (#18045)
.. to get changes from https://github.com/mono/msbuild/pull/163 .

And bump roslyn to 3.4.0-beta4-19569-03 to match msbuild.
2019-12-05 00:42:12 +01:00
Alexander Köplinger 3387bd4a26 Bump bockbuild to get https://github.com/mono/bockbuild/pull/136 2019-12-05 00:36:16 +01:00
Thays Grazia 5dd74a60e8 Fix side effect. 2019-12-04 14:58:48 -06:00
Thays Grazia a36f07c803 Fix DIM in a generic interface. Fixes #17869 2019-12-04 14:58:48 -06:00
Ankit Jain 08e5a9751a Bump msbuild to track mono-2019-10 (#18014)
To get changes from mono/msbuild#159 .
2019-12-03 19:13:59 +01:00
monojenkins 56a583ea5c [2019-10] [profiler] disable inlining when coverage profiler is used and fix allocation sizes (#17991)
* [profiler] let compiler decide about the size of an entry

* [profiler] disable inlining when coverage profiler is used
2019-12-03 16:48:11 +01:00
monojenkins 914ffea421 [sgen] Don't trigger collections during allocation of thread objects (#17997)
Allocation of thread objects usese the mono_object_new_mature API. These objects are allocated before the thread is finished attaching to the runtime. This means that a collection can happen on an unattached thread as well as all its callbacks, which is a counter-intuitive behavior.

On android this is problematic because at the end of the SGen collection we need to call the java collection, which needs to have the thread attached. This could probably be fixed instead from the Xamarin.Android side, but this approach seems simpler and saner.

Fixes https://github.com/mono/mono/issues/17878
2019-12-03 10:10:15 +02:00
Bernhard Urban-Forster 18920a83f4 [interp] track valuetype stack for CEE_RET too (#17984)
[2019-10] [interp] track valuetype stack for CEE_RET too

Backport of #17968

Fixes https://github.com/mono/mono/issues/17924
2019-12-02 11:36:02 +01:00
monojenkins 6164496c68 [merp] Use timeline (and generate timeline breadcrumbs) for SendExceptionToTelemetry() (#17945)
Fixes https://github.com/mono/mono/issues/17790
2019-11-29 11:58:42 +01:00
Ankit Jain 6660ac4690 [2019-10] Bump msbuild to track mono-2019-10 (#17951)
* Bump msbuild to track mono-2019-10

* Bump nuget.exe to 5.4.0
2019-11-29 11:56:32 +01:00
monojenkins 4caf2b3dcc [2019-10] [threadpool] Decrement max_working when worker times out (#17944)
[2019-10] [threadpool] Decrement max_working when worker times out

The corresponding code in CoreCLR:
https://github.com/dotnet/runtime/blob/bf88f146412d1e2d41779422337184a802f186c9/src/coreclr/src/vm/win32threadpool.cpp#L2156-L2164

The issue is that counter._.max_working is only ever changed by:
1. the monitor_thread when it detects starvation (increment by 1).
2. the hill climbing algorithm (increment or decrement).

Creating a periodic load of creating many workers at once followed by a minute
or more of quiescence increases the variable worker.counters._.max_working in
monitor_thread(). Once that counter matches worker.limit_worker_max,
monitor_thread() keeps looping without unparking or creating a thread, even
though the actual number of threads/workers is small. If the existing threads
are all waiting on work that needs a new thread, then a deadlock occurs.

With this change, when a parked worker times out, it will lower max_working to
the number of active (working + parked + starting) threads minus itself (but no
less than limit_worker_min). As a result, monitor_thread will only increment
max_working as long as none of the already running workers are timing out.

Attempt to address https://github.com/mono/mono/issues/17833

---

Also allow monitor_thread to start workers if there aren't enough active, even if the max worker limit has been reached.

Work around a pathological condition where the work_item_count is non-zero, and
the max_working limit has been reached, but the number of active threads is
still below the max.  In that case, unpark some workers and start some new
threads.

May address http://work.azdo.io/827206

Backport of #17927.

/cc @lambdageek
2019-11-27 21:46:06 +01:00
monojenkins 49dce2286c [arm] if mtriple is provided, do not set -march (#17941)
[2019-10] [arm] if mtriple is provided, do not set -march

E.g. when passing `-march=arm -mtriple=armv7s-ios`, `-march` will win and thus ignore `armv7s`.

Fixes https://github.com/mono/mono/issues/17931

* Caused by 5e318afd2e
* Related with 4cd5068230
* Almost fixed by e431093f73

Hopefully we are done with it.




Backport of #17937.

/cc @lewurm
2019-11-27 19:15:13 +01:00
monojenkins 2fdb2f852f [2019-10] [runtime] Treat calling a non-virtual method through an open delegate the same as the normal case instead of the OPEN_VIRTUAL case. (#17904)
* [runtime] Treat calling a non-virtual method through an open delegate the same as the normal case instead of the OPEN_VIRTUAL case.

* [amd64] Fix the return value mapping in gsharedvt calls, the return address might be in different registers in the caller and callee.

* [runtime] Always initialize del->method_ptr even if interp_method is set, JITted code makes calls through it in mixed mode.

* Add a test for open delegates and gsharedvt.

* Increase nrgctx trampoline count, its needed by dynamic-method-churn.exe in full-aot-interp mode.
2019-11-26 21:54:13 +01:00
monojenkins 6d7c01ef83 Make debugger agent startup faster (#17909)
Mono SDB's debugger agent takes a `host:port` parameter to specify the host and
port on which to listen for debugger connection. `host` is passed, via
`mono_get_address_info`, to the `getaddrinfo(3)` standard library call which
does the job of translating the name to the IP address. However, there's no
special treatment for situations when `host` is already an IP address. In this
case `getaddrinfo` takes a lot of time to perform at least two DNS lookups (if
there's just a single DNS server configured) which will time out as the IP
address in `host` will not be resolved by any of the servers.

`getaddrinfo` takes a "hints" parameter where caller can specify some
information about the `host:port` pair to make the lookup faster/easier.
However, Mono doesn't specify the address family in the `hints` parameter, thus
forcing the slow path of DNS lookups on `getaddrinfo`.

This commit adds a new hint named `MONO_HINT_NUMERIC_HOST` (which maps to
`AI_NUMERICHOST` for `getaddrinfo`) which will allow, if set, `getaddrinfo` to
take a faster route in address discovery. Debugger agent will, in most cases,
get an IP address to instead of host name so we call `mono_get_address_info` up
to 3 times (IPv4, IPv6 and unspecified) in order to make the lookup faster.


Backport of #17898.
2019-11-26 00:47:42 +01:00
monojenkins ae85289ca6 2019-10] Add null check around sslStream when trying to dispose in MonoTlsStream
Fixes #15805 at least in terms of what may be making it crash.

Adds a null check around the sslStream before trying to dispose.

Backport of #17270.
2019-11-22 22:18:59 +01:00
Zoltan Varga e9b5aec5ec Bump cecil. (#17861) 2019-11-21 10:47:05 -05:00
monojenkins 7a71151252 enable gss on android (#17851) 2019-11-20 10:53:31 -05:00
monojenkins 775da627ea [debugger-agent] Fix CMD_VM_ALL_THREADS returning wrong value due to unitialized variable (#17848)
[2019-10] [debugger-agent] Fix CMD_VM_ALL_THREADS returning wrong value due to uninitialized variable

`remove_gc_finalizing` wasn't initialized so its value is undefined.

The `count_thread_check_gc_finalizer()` function only sets it in some cases so we could end up with the variable having an undefined (and probably not 0) value.

This resulted in the returned thread count from the debuggee being wrong because we'd decrement `count` even though we shouldn't.

Fixes regression from https://github.com/mono/mono/pull/15618

Thanks to @lewurm for helping me with this!

Backport of #17847.

/cc @akoeplinger
2019-11-20 13:56:05 +01:00
Jay Krell 56dbcbd9ae Fix samples to do what is intended, caught by C++ compilation error. (#17850) 2019-11-20 10:37:01 +01:00
monojenkinsandAleksey Kliger a0c52fed55 [2019-10] [embed] Assert when call mono_runtime_object_init (#17745)
* Adding unit-test of mono embedded

* Fix c++ build.

* Fix c++ build.

* Fix c++ build.

* Fix copy paster error.

* Changing to use the sample that is in samples/embeded as a unit test.

* Adding test-invoke from sample to unit-tests. Discovered an issue and fixed when calling mono_runtime_object_init.

* adding test file

* Fixing Formatting Changing makefile

* Adding -static flag to make sure that we are using the right version of mono.

* Adding -static flag to make sure that we are using the right version of mono.

* Adding -static flag to make sure that we are using the right version of mono.

* Fix coop suspend.

* Fix coop suspend.

* Removing static, this wasn't the problem.

* Update samples/embed/test.cs

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Update samples/embed/teste.c

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Update samples/embed/teste.c

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Update samples/embed/test-invoke.c

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Update samples/embed/test-invoke.c

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Using tabs
2019-11-19 14:33:34 +01:00
monojenkinsandAleksey Kliger 427ac4d876 [2019-10] [debugger] Assert when async debug a generic method (#17788)
* When we try to call a method to get the async_id to do an async debug and we are trying to do this in a generic method like this:

async Task<T> ExecuteAsync_Broken<T>()
 {
            await Task.Delay(2);
            return default;
  }

We need to inflate the generic type before call the method or we will get the error:  Could not execute the method because the containing type 'System.Runtime.CompilerServices.AsyncTaskMethodBuilder1[T_REF]’, is not fully instantiated.

Fixes #17549
Fixes #17569

* Do not use reserved word "class

* adding unit test

* Update mono/mini/debugger-agent.c

Co-Authored-By: Aleksey Kliger (λgeek) <[email protected]>

* Adding mono prefix.

* Moving mono_get_generic_context_from_stack_frame to debugger-engine because debugger-agent is not used on wasm, causing a compilation error.

* Moving mono_get_generic_context_from_stack_frame back to mini-exception and the declaration is in mini.h
2019-11-19 14:32:44 +01:00
monojenkins 5f3898fc40 [MacSDK] Bump xamarin-gtk-theme.py to latest revision from private bockbuild (#17791) 2019-11-14 09:27:15 +01:00
monojenkins dceea95adc [merp] Remove extraneous waitpid invocation (#17763)
This basically guarantees that the following waitpid invocation will fail. Fixes merp stating that its process has failed when it hasn't.
2019-11-11 09:20:40 +01:00
monojenkins 8acdda2d9b [2019-10] [profiler] Fix log profiling of native to managed wrappers (#17746)
* [profiler] Add test case for pinvokes and reverse pinvokes

* [profiler] Fix crash in native to managed wrappers

When we call back to managed from a pinvoke, we're in GC Safe mode and the
profiler instrumentation is inserted in the wrapper before it does the
transition to GC Unsafe.  So we need an extra transition before the profiler
calls its locking functions

Fixes https://github.com/mono/mono/issues/17687

* [coop] Mark internal GC Unsafe functions with MONO_PROFILER_API

Allow the profiler to transition to GC Unsafe mode

* [profiler] ptestrunner.pl fix profiler modules directory
2019-11-07 18:08:26 -05:00
monojenkins a6922d881d [runtime] Fix locking in mono_get_seq_points (). (#17741)
Fixes https://github.com/mono/mono/issues/17737.
2019-11-07 00:51:55 -05:00
monojenkins 1f45bc58eb [2019-10] [System.Net.Http]: Bring HttpClient from CoreFX on monotouch and xammac. (#17645)
Backport of #17628.

* Bump API snapshot submodule

* [csproj] Update project files
2019-11-05 22:11:48 +01:00
Alexander Köplinger e11954da4d [sdks] Use Xcode 11.2 stable version for iOS/Mac SDKs
As requested by the xamarin-macios team.
2019-11-04 15:27:20 +01:00
monojenkins e1f916ed1e [jit] Call mono_class_setup_fields () before accessing field->offset. Fixes https://github.com/mono/mono/issues/17665. (#17668) 2019-11-02 09:40:53 -04:00
monojenkins 844a1d5127 [llvm] Fix a case where we treated the dreg of a store_membase instruction as a dreg, its actually the base reg. (#17649) 2019-11-01 04:03:06 -04:00
monojenkins ced94157a7 [2019-10] Bump CoreFX to pickup corefx PR #367 to fix #17133. (#17621) 2019-10-30 18:35:55 -04:00
Thays Grazia ce7527fd20 [dim][regression] Explicit interface override (#17583) (#17626)
* Precedence order:
-> Override interface method in class
-> Method in class
-> DIM
2019-10-30 19:17:24 -03:00
Alexander Köplinger 010050adc8 [acceptance-tests] Bump mono/roslyn to get build fix
See https://github.com/mono/roslyn/commit/6bfcd4e770609a38b8523e83ce1ec943162f30bb

(cherry picked from commit 1340095581)
2019-10-29 21:43:29 +01:00
Aleksey Kliger (λgeek) 4847b8e7a7 [2019-10] Embedding API GC Unsafe transition fixes (#17586)
* [runtime] Make mono_thread_manage external only

runtime should use mono_thread_manage_internal

* [runtime] Do an unbalanced GC Unsafe transition in mono_jit_cleanup

After mini_cleanup, we don't have GC thread states anymore because all that
stuff was cleaned up, so MONO_EXIT_GC_UNSAFE would assert

* [runtime] Mark mono_runtime_quit external only.

Runtime should use mono_runtime_quit_internal.

After we call the quit_function (aka mini_cleanup) we don't have any GC thread
states anymore because all that stuff got cleaned up.  So MONO_EXIT_GC_UNSAFE
can't work.
2019-10-28 17:16:42 -04:00
Aleksey Kliger 1de5d71e49 [2019-08][merp] Install sigterm handler in EnableMicrosoftTelemetry
Partly revert https://github.com/mono/mono/pull/17296 backports.

Follow-up work for backports of https://github.com/mono/mono/pull/17537 backports.

Addresses https://github.com/mono/mono/issues/17419
2019-10-28 14:31:40 -04:00
monojenkins c45cf8ede2 [2019-10] [merp] Introduce a new 'dump mode' that allows different signal behavior when dumping (#17567)
* [merp] Introduce a new 'dump mode' that allows different signal behavior when dumping

The primary reason for this is gaining the ability to interpret SIGTERM properly as a crashing signal when outside of 'dump mode', and as a utility signal during the 'thread summarizer' dumping process.
2019-10-26 18:49:06 -04:00
monojenkins 098d12c616 [2019-10] Cleaning up SslStream, MobileAuthenticatedStream and TaskToApm. (#17552)
* Cleaning up SslStream, MobileAuthenticatedStream and TaskToApm.

### Overview

After the removal of the Legacy TLS Provider, we can make some cleanups and
improvements to the `SslStream` class.  Since both the remaining providers
use the internal `MobileAuthenticatedStream` and support Task-async code,
we can get rid of some of the Begin/End async logic and the the underlying
`Stream` class handle it instead.

This also fixes a nasty issue with some of those task objects leaking
unobserved exceptions.  The problem was that `SslStream.Dispose()` needs to
clear out all resources, but in doing so also nulls out the `Impl` handle to
the `MobileAuthenticatedStream` - so a subsequent `End*()` call will not
reach it's corresponding `TaskToApm.End()` method.

There are also some cleanups in the internal APIs that were only ever used
internally and not intended for public consumption.

### Mono.Security.dll

* `Mono.Security.Interface`: removed internal `ICertificateValidator2` interface.

* `Mono.Security.Interface.IMonoSslStream`: this internal interface is only used
  by the web-tests, which only use it as a way to get the `SslStream` instance,
  so all those `Begin/End` async methods are now gone.

* `Mono.Security.Interface.IMonoSslStream2`: removed another internal interface.

* `Mono.Security.Interface.MonoTlsProvider`: removed some `internal abstract`
  methods; these have been moved into a new `Mono.Net.Security.MobileTlsProvider`
  inside `System.dll`.

### System.dll

* `Mono.Net.Security.MobileTlsProvider`:
  New abstract internal base class, which received the aforementioned abstract
  internal methods.  The naming is such to make it consistent with the already
  existing `MobileTlsContext` and `MobileAuthenticatedStream`.

Since both `AppleTlsProvider` and `BtlsProvider` now have an abstract internal
base class inside `System.dll`, they can use the `ChainValidationHelper` class
directly and we can also avoid some `Mono.Security` dances like for instance
that `MonoSslPolicyErrors` enum.

This will also help make the code easier to read and maintainer.

* `Mono.AppleTls.AppleTlsProvider` and `Mono.Btls.MonoBtlsProvider`: change base
  class into `MobileTlsProvider` and reflect above mentioned overload changes.

* `Mono.AppleTls.AppleCertificateHelper`: use `ChainValidationHelper` as well.

* `Mono.Net.Security.ChainValidationHelper`: only implement `ICertificateValidator`.
  The `ICertificateValidator` interface is still required because it is in use by
  the web-tests, but the previous `ICertificateValidator2` was an internal dance.

* `Mono.Net.Security.MobileAuthenticatedStream`: largely cleaned up this class.
  - we now implement the current slimmer version of `IMonoSslStream`.
  - moved all those overloads into `SslStream` that only fill in default values for
    some of their arguments and then call another overloaded version of their own.
  - removed lots of `Begin/End` methods that are not used anymore.

* `Mono.Net.Security.MonoTlsProviderFactory`: use `MobileTlsStream` everywhere.

* `Mono.Net.Security.MonoTlsStream`: cleanup `SslStream` creation logic; instead
  of going throw `provider.CreateSslStream()`, we can now use an internal constructor
  directly, thus avoiding the `IMonoSslStream` interface while also making the code
  a lot easier to read and understand.

* `System.Net.Mail.SmtpClient`: same here.

* `System.Net.HttpWebRequest`: use `MobileTlsProvider`.

* `System.Net.Security.SslStream`: largely cleaned up this class.
  - we now use `MobileAuthenticatedStream` directly instead of the `IMonoSslStream`
    interface and therefore could also get rid of `IMonoSslStream2`.
  - cleanup constructor logic to allow the internal constructor being used with a
    `MobileTlsProvider` instead of going through `provider.CreateSslStream()`.
  - all those overloads that are only filling in default values for some of their
    arguments before calling another overloaded version of their own now live here
    instead of in the `MobileAuthenticatedStream` class.  The reason is to simply that
    `MobileAuthenticatedStream` is already quite a complex and difficult class, and
    removing some of that complexity out of it will make it easier to understand.
  - handle the `TaskToApm.Begin()` / `TaskToApm.End()` here to ensure that we are not
    leaking any task objects with unobserved exceptions.
  - removed `BeginRead()` and `BeginWrite()` overloads to let the underlying `Stream`
    class handle these.

* [csproj] Update project files

* Bump api-snapshot
2019-10-25 10:21:25 +02:00
Steve Pfister 1553db019d Added missing SR.missing.cs from the backport 2019-10-24 21:31:28 -05:00
Steve Pfister 456c422eb4 Bump to mono/corefx@fb41040
Includes upstream corefx changes that makes NTLM auth work for more scenarios.

Backport of https://github.com/mono/mono/pull/17530
2019-10-24 21:31:28 -05:00
monojenkins 0c421f48b9 [2019-10] [reflection] mono_method_get_base_method on a GTD should use canonical ginst (#17492)
* [test] GetCustomAttributes on generic type definition

* [reflection] mono_method_get_base_method on a GTD should use canonical ginst

The issue is in how we pass along the generic instantiation.  So there are two
parts here: we start with a method on a GTD which has to decompose into the GTD
and it's instantiation with its own generic parameters, and then we go up to
its parent and grandparent inflating and decomposing the resulting
instantiation. The instantiations keep passing the last parameter as the number
of parameters shrinks so that the gparam index from the original type is now
out of bounds for the parent and grandparent.  If we mess up, we'll get a
BadImageFormatException from the runtime

Fixes https://github.com/mono/mono/issues/17278
2019-10-24 18:02:24 +02:00
monojenkins 3ecf0beab9 [2019-10] [debugger] Changing how debugger handles exception w… (#17523)
* Removing all fixes to fix #15203 and #17083, and trying a new approach to fix this #17084, together.

The thing is when we are executing on hybrid suspend the caller is executed inside try catch in the runtime_invoke_ method that is generated. And this try catch should be ignored for the debugger exception, otherwise it's the last try catch in main thread, but should always be considered to generate the stack trace.

Fixes #17084

* This test check the case that we were missing. On preemptive this test always runs perfectly, on Hybrid, never run well until this PR.

* Changing how call unit test. Changing variable name.
2019-10-24 09:13:55 -04:00
Marius Ungureanu 1b4cf8fadd Bump Bockbuild to pick-up gtk# binding change (#17486)
Fixes https://dev.azure.com/devdiv/DevDiv/_workitems/edit/1005448
Which causes quite a few broken clipboard bugs and possible memory corruption

(cherry picked from commit 989333d6ae)
2019-10-23 14:35:54 +02:00
Aleksey Kliger (λgeek) d75c87694b [2019-10][bcl][jit] implement Interlocked.Exchange<T> in terms of object (#17372)
* [bcl][jit] implement Interlocked.Exchange<T> in terms of object

Exchange<T> is supposed to be picked up as an intrinsic.  But if it isn't,
since T has a class constraint, call the `Exchange (ref object, ref object, ref
object)` overload instead.

This works around a limitation in the JIT:
https://github.com/mono/mono/blob/82a07273c22b996b08fa88ee2e6632d782ac2242/mono/mini/mini-trampolines.c#L704-L713

if we're in the common call trampoline, and the caller is generic method and
the callee is a generic method, if we're using generic sharing for the caller,
but there's no generic jit info for the callee, we will not patch the call
site.

In this case we had Exchange<T> calling Exchange_T<T>
where the callee is an icall (and evidently didn't have generic jit info).

So every time we called Exchange<T>, we would go through the trampoline when
trying to call Exchange_T<T> without patching the call site.

Addresses part of https://github.com/mono/mono/issues/17334

* Bump mono corlib version

* Also drop CompareExchange_T<T>

* Sprinkle some Unsafe magic.

Mark the non-icall methods that we expect the JIT to treet as intrinsics with [Intrinsic]

* aot-runtime doesn't need Volatile.Read<T>/Write<T> code

Both of those methods are implemented as calls to the object overload of Volatile.Read/Write

* fix netcore build

* one more IntrinsicAttribute

* [bcl] Remove CompareExchange_T

In https://github.com/mono/mono/pull/17341 we change the caller of
CompareExchange_T<T>(ref T, ...) to call CompareExchange (ref object, ...), but
didn't delete the declaration.

It's already deleted in unmanaged and in the netcore version of this file.

* [bcl] Add null reference checks to Interlocked.Exchange<T>

and Interlocked.CompareExchange<T>

This is to mimic the old behavior in unmanaged when the intrinsic cannot be
used.

The issue was detected via the coreclr acceptance test:
https://github.com/mono/coreclr/blob/mono/tests/src/baseservices/threading/interlocked/exchange/exchangetneg.il

* and netcore

* Another Mono corlib version bump
2019-10-22 21:29:39 -04:00
monojenkins 1a511ea8f7 [2019-10] [jit] Avoid running mono_handle_native_crash () on the altstack, it can't produce a backtrace. AMD64 only for now. (#17470)
* [jit] Avoid running mono_handle_native_crash () on the altstack, it can't produce a backtrace. AMD64 only for now.

* Fix checks so stack overflows work again.
2019-10-22 11:55:21 -04:00
monojenkins 2783f7c2e6 [profiler] Fix coverage profiler on macos (#17421)
If we have coverage profiling enabled for a method (mono_profiler_coverage_instrumentation_enabled, with coverage_filter callback), then we should be able to allocate a coverage info structure (mono_profiler_coverage_alloc). After https://github.com/mono/mono/commit/52429673dc617fd437518757c04c7448211075e9, coverage_filter was reporting wrapper methods as ok to profile, while mono_profiler_coverage_alloc was refusing to allocate the necessary structure, leading to crashes.

Backport of #17396.
2019-10-21 17:59:54 +02:00
monojenkins 92cb296bf0 [2019-10] Remove the Legacy TLS Provider. (#17425)
* Remove the Legacy TLS Provider.

* `MonoTlsProviderFactory` now treats "legacy" as an alias for "default".

* `Mono.Net.Security/LegacySslStream`: Removed.  This class also wasn't using the
  `MobileAuthenticatedStream` base class, thus preventing cleanups simplifications
  in that area.

* `Mono.Net.Security/LegacyTlsProvider`: Removed.

* `Mono.Security/Mono.Security.Protocol.Tls*`: Removed all the old legacy code.

* `Mono.Security.Interface.MonoTlsProviderFactory`: Bump internal version to 4.

* [csproj] Update project files

* Bump API snapshot submodule
2019-10-21 17:52:36 +02:00
Thays Grazia 57660b72f4 [tests] Changing behavior of some tests in WatchOs
Needs this ifdefs because of this https://github.com/mono/mono/pull/17260.

Backport of https://github.com/mono/mono/pull/17423 and https://github.com/mono/mono/pull/17459
2019-10-21 16:22:44 +02:00
monojenkins e42ec96248 [2019-10] Enable GSS on Linux (#17409)
* Fix GSS on Linux

* fix build

* use gssapi_krb5

* enable on linux

* [csproj] Update project files

* enabled GSS for monodroid

* [csproj] Update project files
2019-10-18 11:33:51 +02:00
Zoltan Varga b19adbb585 [jit] Fix is_reference checks for intrinsics with byref parameters.
Found by https://github.com/mono/mono/issues/17335.
2019-10-18 11:15:18 +02:00
monojenkins 5fdab6d274 [2019-10] [corlib] Mark YieldAwaitable struct readonly (#17390)
* [corlib] Mark YieldAwaitable struct readonly

Make it consistent with .NET Standard/Core which makes future API Compat runs report one less difference.

* Bump API snapshot submodule
2019-10-17 17:49:33 +02:00
Filip Navara 893cf3ae31 Fix SafeHandle marshalling in ref/in/out parameters (#17330) (#17356)
* Fix SafeHandle marshalling in ref/in/out parameters

* Reorder code to make it exception safe, update comments

* Revert the code reordering because it breaks the invariant that new handle returned from native code should always create new SafeHandle on the managed side

* Fix test_0_safehandle_ref test. The test was expecting incorrect behavior, verified on .NET Core 3 and .NET Framework 4.8.

* Address PR feedback

* Fix cut & paste error

* Fix build

* Really fix the test_0_safehandle_ref tests

* Add more tests for SafeHandle marshalling

* Add exclusion for broken CoreFX test
2019-10-16 21:13:45 -04:00
monojenkins 5f655e63c5 Removing execution of network tests from WatchOs. (#17359) 2019-10-16 16:59:41 -03:00
Cody Russell 836d4f5f88 [GTK] Bump bockbuild for GtkViewport autoscrolling patch. (#17321)
(cherry picked from commit 37dc33a257)
2019-10-16 16:47:11 +02:00
monojenkins 46175a45bd [bcl] add WriteLine(string) override to CStreamWriter needed due to corefx import (#17337)
In https://github.com/mono/mono/commit/fd424c5dd07b2dbbd4aafbf9165a42166d789438 we switched over to the `TextWriter.cs`/`StreamWriter.cs` implementation of corefx. One subtle difference is that an override for `WriteLine(string)` in `StreamWriter` was introduced:
https://github.com/mono/corefx/blob/8e3b279377d1f01d2d089f24548e33855bf6502e/src/Common/src/CoreLib/System/IO/StreamWriter.cs#L526-L531
Previously the definition in `TextWriter` was used, which would call the base case `Write(char[])`.  The new override however won't call the base implementation at all, but directly uses the `Span`-variant.

This is a problem for our `CStreamWriter` implementation, since `WriteLine(string)` won't end up in the special handling for `Write(char[])`, which accounts for terminal cursor changes.

This is the real fix for https://github.com/mono/mono/issues/16701

This also reverts commit 68f5613422. ("[TermInfoDriver] update top/left value on Console.{CursorTop,CursorLeft} access (#16745)")
While it kind of masked the issue, it also posed a performance issue on some terminals (e.g. GNOME Terminal).
2019-10-15 22:29:54 +02:00
Aleksey Kliger (λgeek) bca33c0ec4 Update MERP event type to MonoAppCrash (#17291)
* Update parameters in MERP WerReportMetadata xml

To enable backend analysis, we need to update our parameters to match our back end event type, which is MonoAppCrash.

It doesn't make sense to me that the previous implementation constructed the XML here in Mono, but depended on the user (VSMac in this case) to add the "correct" event type.  The parameters in the XML, must match exactly what is expected for the given EventType, and so we should ensure they are always in-sync by defining them here.  Thus, I removed the usage of `eventType` in `mono_merp_enable` and hard coded the expected eventType.

* [merp] Don't pass eventType from managed

The eventType must me MONO_MERP_EVENT_TYPE_STR ("MonoAppCrash") - the backend
determines the format of the other fields based on the event type, so it
doesn't make sense to pass other values from managed since the runtime controls
the other fields.

For compatability Mono.Runtime.EnableMicrosoftTelemetry will still take a
string parameter (now called "unused" instead of "eventType_str") but it will
not pass it down to the internal call.

* Bump corlib version

* [merp] Revert paramerters in WerReportMetadata.xml

Still need event type to be `MonoAppCrash` but the parameters will be the same as before.
2019-10-15 14:42:16 -04:00
Aleksey Kliger e53a3041c0 [merp] Register SIGTERM handler in dump_native_stacktrace
Previously it was installed by EnableMicrosoftTelemetry, which is too early.
Now we get here without a handler installed even when mono_merp_enabled returns true.
2019-10-14 19:48:15 -05:00
Aleksey Kliger 09437dfdc7 [merp] Don't call install_state_summarizer in EnableMicrosoftTelemetry
install_state_summarizer installs a SIGTERM handler. Unfortunately
sigterm_signal_handler assumes that it will only be called when a crash is
already in progress (it assumes it won't be the supervisor, and so it doesn't
setup the memory for capturing a crash report among other things).
2019-10-14 19:48:15 -05:00
Alexander Köplinger f1303dd529 [ci] Restore previous values for no Xcode in CI_TAGS
It is still used by the non-pipeline PR builds (we should unify this at some point).

(cherry picked from commit 1a21ad7dd0)
2019-10-14 20:39:38 +02:00
Alexander Köplinger cd2f8bc293 [ci] Fix ios versions in Mono SDKs
(cherry picked from commit 62963dcfd9159821b99a68781e4adebebba0c98f)
2019-10-14 18:51:15 +02:00
Alexander Köplinger fa2ee06b70 Fix typo in last commit 2019-10-14 18:42:59 +02:00
Alexander Köplinger 6ba65ad1e2 [ci] Use Xcode11.1 for XI/XM Mono SDK builds (#17313)
As requested by the xamarin-macios team.

(cherry picked from commit 850def2f3b)
2019-10-14 18:38:50 +02:00
monojenkins 937cfd1bb6 [sdks] properly shutdown runtime for Mono.Debugger.Soft test app (#17293)
mini_jit_cleanup will cause mono_runtime_try_shutdown to be called before
mono_runtime_quit which will set the shutting down flags in the runtime.
2019-10-14 11:50:08 +02:00
monojenkins 329a1867e5 [2019-10] [merp] Print missing status marker file for stage 1 (setup) (#17221)
* [merp] Print missing status marker file for stage 1 (setup)

* Zeroing is not necessary, snprintf() always null-terminates in this case

* Remove unused variable
2019-10-11 13:53:37 -04:00
monojenkins 3a7e35c658 [2019-10] [System.Net.Http] Make HttpClientHandler on WatchOS always fallback (#17268)
* [System.Net.Http] Make HttpClientHandler on WatchOS always fallback

to platform handler. This simplifies HttpClientHandler in shared libraries
and the "default" socket handler would always throw PNSE anyway

* [csproj] Update project files
2019-10-11 09:47:26 +02:00
Alexander Köplinger 4c611593ac [tests] Bump corefx to get Azure testhost change (#17275)
* Bump corefx to get Azure testhost change

See https://github.com/mono/corefx/pull/360

* Update ClientWebSocketTest as well

(cherry picked from commit d457346e06)
2019-10-11 09:35:51 +02:00
monojenkins 91fe0b731b Update Linker. This fixes a Xamarin.Android breakage (#17273) 2019-10-10 16:26:06 -04:00
monojenkins 140dcdb7a3 [sgen] Fix invalid value passed to write barrier (#17248)
When doing memory copy dest is the destination address and src is the source address. If we are copying a single reference, we need to emit a write barrier and pass to the write barrier the value, not the pointer where the value is stored.
2019-10-09 14:51:59 +03:00
monojenkins 5cda28e320 [2019-10] Add drawing type converters to mobile profiles (#17239)
* Add drawing type converters to mobile profiles

Needed for https://github.com/xamarin/xamarin-android/issues/3726

* Bump API snapshot submodule

* [csproj] Update project files
2019-10-09 12:16:00 +02:00
monojenkins e1b0e94040 Revert mono_runtime_set_main_args in 44ff0597b8. It breaks Xamarin.Android. (#17234) 2019-10-09 00:53:53 -04:00
Jo Shields af8d610864 Bump version to 6.8 (#17206)
* Bump version to 6.8

* Add missing new linker source file

(cherry picked from commit a4e531d1f86fe0ff8a18764f30d97610cc2e1eb3)

* [csproj] Update project files

* No monolinker on MCS mode, new linker version needs Roslyn

(cherry picked from commit 6539e12e4050fc68d5aa11fdb4edfa582bb1d11e)
2019-10-07 22:35:13 +02:00
monojenkins 58eda9c781 [IO] Remove read-only logic in mono_w32_get_disk_free_space (#17208)
[2019-10] [IO] Remove read-only logic in mono_w32_get_disk_free_space

Fixes #17151

This brings us in line with GetDiskFreeSpaceExW on Windows as well as .NET Core.

I checked with the Android folks and it seems like this won't fail their test - all they check is that the returned value isn't `long.MaxValue`.

Backport of #17177.

/cc @akoeplinger @CoffeeFlux
2019-10-07 20:05:58 +02:00
1131 changed files with 77142 additions and 36257 deletions

No files matched your search

+3 -8
View File
@@ -34,7 +34,7 @@
/external/corefx @akoeplinger @marek-safar @egorbo @steveisok
/external/corert @akoeplinger @marek-safar @egorbo @steveisok
/external/linker @marek-safar
/external/llvm-project @SamMonoRT @vargaz @imhameed
/external/llvm @SamMonoRT @vargaz @imhameed
/external/nuget-buildtasks @radical @akoeplinger
/external/roslyn-binaries @kg @marek-safar @akoeplinger @lewing
@@ -92,12 +92,6 @@
/mono/metadata/thread* @lateralusX @lambdageek
/mono/metadata/w32* @lateralusX @lambdageek
/mono/metadata/*-win* @lateralusX @lambdageek
/mono/metadata/appdomain* @vargaz @lambdageek @CoffeeFlux
/mono/metadata/assembly* @vargaz @lambdageek @CoffeeFlux
/mono/metadata/domain* @vargaz @lambdageek @CoffeeFlux
/mono/metadata/loader* @vargaz @lambdageek @CoffeeFlux
/mono/metadata/native-library* @vargaz @lambdageek @CoffeeFlux
/mono/metadata/*-unix* @lambdageek @CoffeeFlux
/mono/mini @vargaz @lewurm @lambdageek @SamMonoRT
/mono/mini/*cfgdump* @lewurm @vargaz
@@ -116,6 +110,8 @@
/mono/sgen @BrzVlad @lambdageek
/mono/tools/offsets-tool @lewurm @rolfbjarne
/mono/utils @vargaz @lewurm @lambdageek
/mono/utils/atomic* @lewurm @vargaz
/mono/utils/mono-hwcap* @lewurm @vargaz
@@ -156,6 +152,5 @@
/tools @lambdageek @vargaz
/tools/locale-builder @marek-safar @egorbo
/tools/nuget-hash-extractor @marek-safar @radical @akoeplinger
/tools/offsets-tool @lewurm @rolfbjarne
/tools/pedump @lambdageek @lewurm
/tools/sgen @brzvlad @vargaz @naricc
-2
View File
@@ -139,8 +139,6 @@ llvm/usr/
sdks/builds/llvm-*/
sdks/builds/android-*/
mcs/build/compiler-server.log
tools/offsets-tool-py/offtool/
tools/offsets-tool-py/clang/__pycache__
##############################################################################
# Arcade output directories
+4 -7
View File
@@ -58,16 +58,13 @@
[submodule "external/api-snapshot"]
path = external/api-snapshot
url = git://github.com/mono/api-snapshot.git
[submodule "external/llvm"]
path = external/llvm
url = git://github.com/mono/llvm.git
branch = release_60
[submodule "external/helix-binaries"]
path = external/helix-binaries
url = git://github.com/mono/helix-binaries.git
[submodule "external/illinker-test-assets"]
path = external/illinker-test-assets
url = git://github.com/mono/illinker-test-assets.git
[submodule "external/llvm-project"]
path = external/llvm-project
url = git://github.com/dotnet/llvm-project.git
branch = release/6.x
[submodule "external/bdwgc"]
path = external/bdwgc
url = git://github.com/Unity-Technologies/bdwgc.git
+1 -4
View File
@@ -21,7 +21,7 @@ endif
if ENABLE_NETCORE
update_submodules =
SUBDIRS = mk llvm mono runtime netcore
SUBDIRS = mk llvm mono runtime netcore netcore/corerun
else
update_submodules = update_submodules
SUBDIRS = $(build_with_msvc) mk po $(libgc_dir) llvm mono $(ikvm_native_dir) support data runtime scripts man samples $(tools_dir) $(build_without_msvc) $(docs_dir) acceptance-tests
@@ -67,9 +67,6 @@ dist-hook:
rm -f `find $(top_distdir)/external -path '*\.exe' -not -path '*/roslyn-binaries/*'`
rm -f `find $(top_distdir)/external -path '*\.dll' -not -path '*/binary-reference-assemblies/*' -not -path '*/roslyn-binaries/*' -not -path '*/helix-binaries/*'`
rm -rf "$(top_distdir)/external/linker/test"
rm -rf "$(top_distdir)/external/llvm-project/lldb/test"
rm -rf "$(top_distdir)/external/llvm-project/libcxx/test"
rm -rf "$(top_distdir)/external/llvm-project/clang/test"
pkgconfigdir = $(libdir)/pkgconfig
noinst_DATA = mono-uninstalled.pc
+5 -17
View File
@@ -150,29 +150,17 @@ automake $am_opt ||
echo "Running autoconf ..."
autoconf || { echo "**Error**: autoconf failed."; exit 1; }
if test -d $srcdir/external/bdwgc; then
echo Running external/bdwgc/autogen.sh ...
(cd $srcdir/external/bdwgc ; NOCONFIGURE=1 ./autogen.sh "$@")
echo Done running external/bdwgc/autogen.sh ...
if test -d $srcdir/libgc; then
echo Running libgc/autogen.sh ...
(cd $srcdir/libgc ; NOCONFIGURE=1 ./autogen.sh "$@")
echo Done running libgc/autogen.sh ...
fi
if test x$MONO_EXTRA_CONFIGURE_FLAGS != x; then
echo "MONO_EXTRA_CONFIGURE_FLAGS is $MONO_EXTRA_CONFIGURE_FLAGS"
fi
host_conf_flag=
build_uname_all=`(uname -a) 2>/dev/null`
case "$build_uname_all" in
CYGWIN*)
if [[ "$@" != *"--host="* ]]; then
echo "Missing --host parameter, configure using ./configure --host=i686-w64-mingw32 or --host=x86_64-w64-mingw32"
echo "Falling back using --host=x86_64-w64-mingw32 as default."
host_conf_flag="--host=x86_64-w64-mingw32"
fi
;;
esac
conf_flags="$MONO_EXTRA_CONFIGURE_FLAGS --enable-maintainer-mode --enable-compile-warnings $host_conf_flag" #--enable-iso-c
conf_flags="$MONO_EXTRA_CONFIGURE_FLAGS --enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c
if test x$NOCONFIGURE = x; then
echo Running $srcdir/configure $conf_flags "$@" ...
+54 -63
View File
@@ -4,12 +4,23 @@
# This line is parsed by tools besides autoconf, such as msvc/mono.winconfig.targets.
# It should remain in the format they expect.
#
AC_INIT(mono, [6.9.0],
AC_INIT(mono, [6.8.0],
[https://github.com/mono/mono/issues/new])
AC_CONFIG_SRCDIR([README.md])
AC_CONFIG_MACRO_DIR([m4])
if test "x$host_alias" = "x"; then
build_uname_all=`(uname -a) 2>/dev/null`
case "$build_uname_all" in
CYGWIN*)
AC_MSG_NOTICE([Run configure using ./configure --host=i686-w64-mingw32 or --host=x86_64-w64-mingw32])
AC_MSG_NOTICE([Falling back using --host=x86_64-w64-mingw32 as default.])
host_alias=x86_64-w64-mingw32
;;
esac
fi
AC_CANONICAL_SYSTEM
AC_CANONICAL_HOST
@@ -17,7 +28,7 @@ AC_CANONICAL_HOST
# The extra brackets are to foil regex-based scans.
m4_ifdef([_A][M_PROG_TAR],[_A][M_SET_OPTION([tar-ustar])])
AM_INIT_AUTOMAKE([1.9 dist-xz tar-ustar no-dist-gzip foreign subdir-objects]
AM_INIT_AUTOMAKE([1.9 dist-xz tar-ustar no-dist-gzip foreign]
m4_esyscmd([case `automake --version | head -n 1` in # parallel-tests is default in automake 1.13+, we need to explicitly enable it
*1.11*|*1.12*) echo parallel-tests;; # for 1.11 and 1.12 but not below as those versions don't recognize the flag
esac])) # TODO: remove this hack once we require automake 1.11+
@@ -63,7 +74,7 @@ MONO_VERSION_BUILD=`echo $VERSION | cut -d . -f 3`
# This line is parsed by tools besides autoconf, such as msvc/mono.winconfig.targets.
# It should remain in the format they expect.
#
MONO_CORLIB_VERSION=423e7794-9279-49a3-a477-f1cb2432e9f4
MONO_CORLIB_VERSION=ABB721D6-116A-4555-B4FD-9248146D2051
#
# Put a quoted #define in config.h.
@@ -148,7 +159,7 @@ case "$host" in
platform_wasm=yes
# FIXME:
RID="osx-x64"
COREARCH="wasm32"
COREARCH="x64"
CORETARGETS="-p:TargetsUnix=true -p:TargetsOSX=true"
build_darwin=yes
;;
@@ -173,6 +184,7 @@ case "$host" in
# Boehm not supported on 64-bit Windows.
case "$host" in
x86_64-*-* | amd64-*-*)
support_boehm=no
with_gc=sgen
RID="win-x64"
COREARCH="x64"
@@ -191,6 +203,9 @@ case "$host" in
with_tls=pthread
with_sgen_default_concurrent=yes
LN_S=cp
# This forces libgc to use the DllMain based thread registration code on win32
libgc_configure_args="$libgc_configure_args --enable-win32-dllmain=yes"
;;
*-*-*netbsd*)
CPPFLAGS="$CPPFLAGS -D_REENTRANT -DGC_NETBSD_THREADS -D_GNU_SOURCE"
@@ -469,8 +484,6 @@ case "$host" in
mono_cv_clang=no
;;
*-*-aix*|*-*-os400*)
AC_DEFINE(HOST_AIX,1,[Targeting the AIX and PASE platforms])
host_aix=yes
dnl IMPORTANT: For svr4 sonames on AIX, you should set
dnl `OBJECT_MODE=64` when configuring.
dnl libtool cannot generate functioning svr4 sonames on
@@ -574,7 +587,6 @@ AM_CONDITIONAL(HOST_ANDROID, test x$platform_android = xyes)
AM_CONDITIONAL(HOST_TIZEN, test x$platform_tizen = xyes)
AM_CONDITIONAL(HOST_IOS, test x$platform_ios = xyes)
AM_CONDITIONAL(HOST_WASM, test x$platform_wasm = xyes)
AM_CONDITIONAL(HOST_AIX, test x$host_aix = xyes)
if test -z "$HOST_DARWIN_TRUE"; then :
PLATFORM_AOT_SUFFIX=.dylib
@@ -669,7 +681,7 @@ AC_SUBST(export_ldflags)
AC_PROG_LD
AC_PROG_LD_GNU
AC_CHECK_HEADERS(sys/filio.h sys/sockio.h netdb.h utime.h sys/utime.h semaphore.h sys/un.h linux/rtc.h sys/syscall.h sys/mkdev.h sys/uio.h sys/param.h sys/sysctl.h libproc.h sys/prctl.h copyfile.h gnu/lib-names.h)
AC_CHECK_HEADERS(sys/filio.h sys/sockio.h netdb.h utime.h sys/utime.h semaphore.h sys/un.h linux/rtc.h sys/syscall.h sys/mkdev.h sys/uio.h sys/param.h sys/sysctl.h libproc.h sys/prctl.h copyfile.h)
AC_CHECK_HEADERS(sys/param.h sys/socket.h sys/ipc.h sys/utsname.h alloca.h ucontext.h pwd.h sys/select.h netinet/tcp.h netinet/in.h unistd.h sys/types.h link.h asm/sigcontext.h sys/inotify.h arpa/inet.h complex.h unwind.h)
# zlib/configure checks for unistd.h existance and defines HAVE_UNISTD_H on the compiler
@@ -701,11 +713,6 @@ case "$host" in
have_sys_zlib=no
zlib_msg="bundled zlib"
;;
# Use bundled zlib on RISC-V for now to make cross-compiling easier.
riscv*)
have_sys_zlib=no
zlib_msg="bundled zlib"
;;
*)
AC_CHECK_HEADER(zlib.h, [have_sys_zlib=yes], [have_sys_zlib=no])
if test x$have_sys_zlib = xyes; then
@@ -1178,7 +1185,7 @@ AC_DEFINE(DISABLE_STRUCTURED_CRASH,1,[Do not create structured crash files durin
fi
case "$host" in
*-mingw*|*-*-cygwin*)
*-mingw*|*-*-cygwin*|*-*-aix*|*-*-os400*)
crash_reporting=no
;;
esac
@@ -1356,7 +1363,6 @@ MONO_LLVM_PATH_OPTION=llvm-path="`pwd`/llvm/usr/bin"
if test x$cross_compiling = xyes -o x$enable_mcs_build = xno; then
DISABLE_MCS_DOCS_default=yes
elif test x$with_runtime_preset = xnetcore; then
# Keep in sync with winconfig.h netcore configuration.
DISABLE_MCS_DOCS_default=yes
BTLS_SUPPORTED=no
enable_mcs_build=no
@@ -1373,7 +1379,6 @@ elif test x$with_runtime_preset = xnetcore; then
mono_feature_disable_gac='yes'
mono_feature_disable_perfcounters='yes'
mono_feature_disable_attach='yes'
mono_feature_disable_dllmap='yes'
disable_mono_native=yes
support_boehm=no
elif test x$with_runtime_preset = xnet_4_x; then
@@ -1747,9 +1752,9 @@ fi
AM_CONDITIONAL(ENABLE_STATIC_GCC_LIBS, test "x$enable_static_gcc_libs" = "xyes")
AC_ARG_ENABLE(minimal, [ --enable-minimal=LIST drop support for LIST subsystems.
LIST is a comma-separated list from: aot, profiler, decimal, pinvoke, debug, appdomains, verifier, dllmap,
LIST is a comma-separated list from: aot, profiler, decimal, pinvoke, debug, appdomains, verifier,
reflection_emit, reflection_emit_save, large_code, logging, com, ssa, generics, attach, jit, interpreter, simd, soft_debug, perfcounters, normalization, desktop_loader, shared_perfcounters, remoting,
security, lldb, mdb, assert_messages, cleanup, sgen_marksweep_conc, sgen_split_nursery, sgen_gc_bridge, sgen_debug_helpers, sockets, gac, threads.],
security, lldb, mdb, assert_messages, cleanup, sgen_marksweep_conc, sgen_split_nursery, sgen_gc_bridge, sgen_debug_helpers, sockets, gac.],
[
for feature in `echo "$enable_minimal" | sed -e "s/,/ /g"`; do
eval "mono_feature_disable_$feature='yes'"
@@ -1961,16 +1966,6 @@ if test "x$mono_feature_disable_gac" = "xyes"; then
AC_MSG_NOTICE([Disabled GAC support])
fi
if test "x$mono_feature_disable_dllmap" = "xyes"; then
AC_DEFINE(DISABLE_DLLMAP,1,[Disables use of DllMaps in MonoVM])
AC_MSG_NOTICE([Disabled DllMap in the loader.])
fi
if test "x$mono_feature_disable_threads" = "xyes"; then
AC_DEFINE(DISABLE_THREADS, 1, [Disable Threads])
AC_MSG_NOTICE([Disabled threading support])
fi
AC_ARG_ENABLE(executables, [ --disable-executables disable the build of the runtime executables], enable_executables=$enableval, enable_executables=yes)
AM_CONDITIONAL(DISABLE_EXECUTABLES, test x$enable_executables = xno)
@@ -2035,14 +2030,14 @@ if test "x$support_boehm" = "xyes"; then
case "x$libgc" in
xincluded)
if test "x$support_boehm" = "xyes"; then
libgc_dir=external/bdwgc
libgc_dir=libgc
fi
LIBGC_CPPFLAGS='-I$(top_srcdir)/external/bdwgc/include -I$(top_srcdir)/external/bdwgc/libatomic_ops/src'
LIBGC_LIBS='$(top_builddir)/external/bdwgc/libgc.la'
LIBGC_STATIC_LIBS='$(top_builddir)/external/bdwgc/libgc-static.la'
LIBGC_CPPFLAGS='-I$(top_srcdir)/libgc/include'
LIBGC_LIBS='$(top_builddir)/libgc/libmonogc.la'
LIBGC_STATIC_LIBS='$(top_builddir)/libgc/libmonogc-static.la'
BOEHM_DEFINES="-DHAVE_BOEHM_GC -DGC_THREADS"
BOEHM_DEFINES="-DHAVE_BOEHM_GC"
if test x$target_win32 = xyes; then
BOEHM_DEFINES="$BOEHM_DEFINES -DGC_NOT_DLL"
@@ -2233,10 +2228,6 @@ if test x$host_win32 = xno; then
AC_CHECK_FUNCS(getresuid)
AC_CHECK_FUNCS(setresuid)
AC_CHECK_FUNCS(kqueue)
# IBM provides a compatibility library for i offering this function.
# BSDs and others, have execinfo in base or packages.
AC_SEARCH_LIBS(backtrace_symbols, execinfo util)
# Two-step so it sets it in config.h
AC_CHECK_FUNCS(backtrace_symbols)
AC_CHECK_FUNCS(mkstemp)
AC_CHECK_FUNCS(mmap)
@@ -2363,6 +2354,21 @@ if test x$host_win32 = xno; then
AC_CHECK_LIB(inotify, inotify_init, LIBS="$LIBS -linotify")
esac
dnl *******************************
dnl *** Checks for MSG_NOSIGNAL ***
dnl *******************************
AC_MSG_CHECKING(for MSG_NOSIGNAL)
AC_TRY_COMPILE([#include <sys/socket.h>], [
int f = MSG_NOSIGNAL;
], [
# Yes, we have it...
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_MSG_NOSIGNAL, 1, [Have MSG_NOSIGNAL])
], [
# We'll have to use signals
AC_MSG_RESULT(no)
])
dnl *****************************
dnl *** Checks for IPPROTO_IP ***
dnl *****************************
@@ -2945,13 +2951,6 @@ if test x$host_win32 = xno; then
AC_SEARCH_LIBS(shm_open, pthread rt posix4)
AC_CHECK_FUNCS(shm_open)
dnl ********************************
dnl *** Checks for gettext lib ***
dnl ********************************
# This is needed for some hackery for AIX;
# Mono itself doesn't use it, but DllMap includes it
AC_SEARCH_LIBS([gettext], [intl])
dnl ********************************
dnl *** Checks for timezone stuff **
dnl ********************************
@@ -5149,12 +5148,7 @@ AC_SEARCH_LIBS(dlopen, dl)
# Apple -bind_at_load
# The rest GNU.
#
export_link_flags=--export-dynamic
case $host_os in
mingw*|cygwin*)
export_link_flags=--export-all-symbols
esac
AX_APPEND_LINK_FLAGS([-Wl,$export_link_flags -Wl,-Bsymbolic -bsymbolic -Wl,-z,now -Wl,-bind_at_load])
AX_APPEND_LINK_FLAGS([-Wl,--export-dynamic -Wl,-Bsymbolic -bsymbolic -Wl,-z,now -Wl,-bind_at_load])
AC_CHECK_HEADERS(getopt.h sys/select.h sys/time.h sys/wait.h pwd.h iconv.h sys/types.h sys/resource.h)
dnl giconv.c will check on HAVE_ICONV_H but we need this for link time
@@ -5606,9 +5600,9 @@ case "x$libgc" in
# if these are instrumented it will be very bad news
# (infinite recursion, undefined parking behavior, etc)
TMP_CPPFLAGS=`echo $TMP_CPPFLAGS | sed -e 's/-finstrument-for-thread-suspension//g'`
ac_configure_args="$ac_configure_args --enable-single-obj-compilation --disable-embed-check --with-libgc-threads=$libgc_threads $libgc_configure_args \"CPPFLAGS_FOR_LIBGC=$TMP_CPPFLAGS\" \"CFLAGS_FOR_LIBGC=$CFLAGS_FOR_LIBGC\""
ac_configure_args="$ac_configure_args --disable-embed-check --with-libgc-threads=$libgc_threads $libgc_configure_args \"CPPFLAGS_FOR_LIBGC=$TMP_CPPFLAGS\" \"CFLAGS_FOR_LIBGC=$CFLAGS_FOR_LIBGC\""
if test "x$support_boehm" = "xyes"; then
AC_CONFIG_SUBDIRS(external/bdwgc)
AC_CONFIG_SUBDIRS(libgc)
fi
;;
esac
@@ -5707,7 +5701,7 @@ dnl *** feature experiments ***
dnl ***************************
dnl When adding experiments, also add to mono/utils/mono-experiments.def
AC_ARG_ENABLE(experiment, [ --enable-experiment=LIST Enable experimental fatures from the comma-separate LIST. Available experiments: null,tiered],[
AC_ARG_ENABLE(experiment, [ --enable-experiment=LIST Enable experimental fatures from the comma-separate LIST. Available experiments: null],[
if test x$enable_experiment != x ; then
AC_DEFINE(ENABLE_EXPERIMENTS,1,[Enable feature experiments])
@@ -5718,20 +5712,14 @@ AC_ARG_ENABLE(experiment, [ --enable-experiment=LIST Enable experimental f
if test "x$mono_experiment_test_enable_all" = "xyes"; then
eval "mono_experiment_test_enable_null='yes'"
eval "mono_experiment_test_enable_tiered='yes'"
true
fi
if test "x$mono_experiment_test_enable_null" = "xyes"; then
AC_DEFINE(ENABLE_EXPERIMENT_null, 1, [Enable experiment 'null'])
fi
if test "x$mono_experiment_test_enable_tiered" = "xyes"; then
AC_DEFINE(ENABLE_EXPERIMENT_TIERED, 1, [Enable experiment 'Tiered Compilation'])
fi
],[])
AM_CONDITIONAL(ENABLE_EXPERIMENT_TIERED, test x$mono_experiment_test_enable_tiered = xyes)
dnl **********************
dnl *** checked builds ***
dnl **********************
@@ -6044,6 +6032,10 @@ fi
AM_CONDITIONAL(ENABLE_MSVC, test x$enable_msvc = xyes)
if test "x$enable_msvc" = "xyes"; then
if test "x$support_boehm" = "xyes"; then
echo "Error, Boehm GC is not supported when using --enable-msvc."
exit 1
fi
mono_msvc_build_dir='$(top_srcdir)'/msvc/build/sgen
if test "x$host_cpu" = "xi686"; then
mono_msvc_build_lib_dir='$(mono_msvc_build_dir)'/Win32/lib/Release
@@ -6067,8 +6059,8 @@ fi
AC_SUBST(mono_runtime)
AC_SUBST(mono_runtime_wrapper)
CSC_LOCATION=`cd $srcdir && pwd`/external/roslyn-binaries/Microsoft.Net.Compilers/3.3.0/csc.exe
VBCS_LOCATION=`cd $srcdir && pwd`/external/roslyn-binaries/Microsoft.Net.Compilers/3.3.0/VBCSCompiler.exe
CSC_LOCATION=`cd $srcdir && pwd`/external/roslyn-binaries/Microsoft.Net.Compilers/3.5.0/csc.exe
VBCS_LOCATION=`cd $srcdir && pwd`/external/roslyn-binaries/Microsoft.Net.Compilers/3.5.0/VBCSCompiler.exe
if test $csc_compiler = mcs; then
CSC=$mcs_topdir/class/lib/build/mcs.exe
@@ -6713,7 +6705,6 @@ mono/native/Makefile
mono/utils/Makefile
mono/utils/jemalloc/Makefile
mono/metadata/Makefile
mono/zlib/Makefile
mono/dis/Makefile
mono/cil/Makefile
mono/arch/Makefile
@@ -7006,7 +6997,7 @@ if test x$buildsgen = xyes; then
fi
if test "x$with_core" = "xonly"; then
if test ! -e netcore/Makefile; then
if test ! -d netcore; then
# Out of tree builds
mkdir -p netcore
echo "all:" > netcore/Makefile
+13 -13
View File
@@ -1,9 +1,8 @@
import lldb
import traceback
def print_frames(thread, num_frames, current_thread):
# TODO: Make output header similar to bt.
print('%c thread #%i' % ('*' if current_thread else ' ', thread.idx))
print '%c thread #%i' % ('*' if current_thread else ' ', thread.idx)
if current_thread:
selected_frame = thread.GetSelectedFrame()
@@ -15,16 +14,17 @@ def print_frames(thread, num_frames, current_thread):
if function_name == "interp_exec_method_full":
try:
s = 'frame->imethod->method'
methoddesc = frame.EvaluateExpression('(char*) mono_method_full_name (' + s + ', 1)').summary[1:-1]
klassname = frame.EvaluateExpression('(char*) ' + s + '->klass->name').summary[1:-1]
methodname = frame.EvaluateExpression('(char*) ' + s + '->name').summary[1:-1]
ipoffset = frame.EvaluateExpression('ip').GetValueAsUnsigned()
insn = ''
if ipoffset != 0:
ipoffset -= frame.EvaluateExpression('frame->imethod->code').GetValueAsUnsigned()
insn = "\"" + frame.EvaluateExpression('mono_interp_opname (*ip)').summary[1:-1] + "\""
var = '%s @ %d %s || %s' % (methoddesc, ipoffset, insn, frame)
ipoffset -= frame.EvaluateExpression('imethod->code').GetValueAsUnsigned()
insn = "\"" + frame.EvaluateExpression('mono_interp_opname [*ip]').summary[1:-1] + "\""
var = '%s::%s @ %d %s || %s' % (klassname, methodname, ipoffset, insn, frame)
except Exception as e:
traceback.print_exc()
print "DBG: execfail:" + str(e)
elif function_name == "mono_interp_transform_method":
try:
s = 'runtime_method->method'
@@ -32,7 +32,7 @@ def print_frames(thread, num_frames, current_thread):
methodname = frame.EvaluateExpression('(char*) ' + s + '->name').summary[1:-1]
var = 'transforming %s::%s || %s' % (klassname, methodname, frame)
except Exception as e:
print("DBG: transformfail:" + str(e))
print "DBG: transformfail:" + str(e)
elif pc[0] == '0':
try:
framestr = frame.EvaluateExpression('(char*)mono_pmip((void*)%s)' % pc).summary[1:-1]
@@ -40,7 +40,7 @@ def print_frames(thread, num_frames, current_thread):
except:
pass
print(' %c %s' % ('*' if current_thread and frame.idx == selected_frame.idx else ' ', var))
print ' %c %s' % ('*' if current_thread and frame.idx == selected_frame.idx else ' ', var)
def monobt(debugger, command, result, dict):
opts = {'all_bt': False, 'num_frames': None}
@@ -50,20 +50,20 @@ def monobt(debugger, command, result, dict):
elif command.isdigit():
opts['num_frames'] = int(command)
elif command != '':
print('error: monobt [<number>|all]')
print 'error: monobt [<number>|all]'
return
target = debugger.GetSelectedTarget()
process = target.process
if not process.IsValid():
print('error: invalid process')
print 'error: invalid process'
return
if opts['all_bt']:
for thread in process.threads:
print_frames(thread, len(thread), process.selected_thread == thread)
print('')
print ''
else:
thread = process.selected_thread
num_frames = len(thread) if opts['num_frames'] is None else opts['num_frames']
@@ -76,4 +76,4 @@ def __lldb_init_module (debugger, dict):
# Add any commands contained in this module to LLDB
debugger.HandleCommand('command script add -f monobt.monobt monobt')
debugger.HandleCommand('command alias mbt monobt')
print('"monobt" command installed')
print '"monobt" command installed'
+39 -61
View File
@@ -2,58 +2,36 @@
These are some useful links and notes pertaining to the RISC-V port of Mono.
## Useful RISC-V documentation
## Useful RISC-V documents
* [RISC-V User-Level ISA Specification](https://riscv.org/specifications)
* [RISC-V Privileged ISA Specification](https://riscv.org/specifications/privileged-isa)
* [RISC-V Debug Specification](https://riscv.org/specifications/debug-specification)
* [RISC-V ELF psABI Specification](https://github.com/riscv/riscv-elf-psabi-doc)
* [RISC-V C API Specification](https://github.com/riscv/riscv-c-api-doc)
* [RISC-V Toolchain Conventions](https://github.com/riscv/riscv-toolchain-conventions)
* [RISC-V Assembly Programmer's Manual](https://github.com/riscv/riscv-asm-manual)
* [RISC-V User-Level ISA Specification](https://riscv.org/specifications/)
* [RISC-V Privileged ISA Specification](https://riscv.org/specifications/privileged-isa/)
* [RISC-V Debug Specification Standard](https://github.com/riscv/riscv-debug-spec/blob/master/riscv-debug-spec.pdf)
* [RISC-V Assembly Programmer's Manual](https://github.com/riscv/riscv-asm-manual/blob/master/riscv-asm.md)
* [RISC-V ELF psABI Specification](https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md)
## Useful RISC-V repositories
* [RISC-V Organization](https://github.com/riscv)
* [RISC-V GNU Toolchain](https://github.com/riscv/riscv-gnu-toolchain)
* [RISC-V Binutils](https://github.com/riscv/riscv-binutils-gdb)
* [RISC-V GCC](https://github.com/riscv/riscv-gcc)
* [RISC-V Glibc](https://github.com/riscv/riscv-glibc)
* [RISC-V Newlib](https://github.com/riscv/riscv-newlib)
* [RISC-V Linux](https://github.com/riscv/riscv-linux)
* [RISC-V LLD](https://github.com/riscv/riscv-lld)
* [RISC-V Tools](https://github.com/riscv/riscv-tools)
* [RISC-V GNU Toolchain](https://github.com/riscv/riscv-gnu-toolchain)
* [RISC-V Binutils](https://github.com/riscv/riscv-binutils-gdb)
* [RISC-V GCC](https://github.com/riscv/riscv-gcc)
* [RISC-V Glibc](https://github.com/riscv/riscv-glibc)
* [RISC-V Newlib](https://github.com/riscv/riscv-newlib)
* [RISC-V QEMU](https://github.com/riscv/riscv-qemu)
* [RISC-V Opcodes](https://github.com/riscv/riscv-opcodes)
* [RISC-V Tests](https://github.com/riscv/riscv-tests)
* [lowRISC Organization](https://github.com/lowrisc)
* [RISC-V LLVM](https://github.com/lowrisc/riscv-llvm)
## Setting up a cross environment
### Debian/Ubuntu packages
Setting up a cross environment with a Linux toolchain and QEMU is quite easy.
This is the most painless way of getting a functional toolchain installed. Note
that these packages may not be available on older distributions; this is tested
on Ubuntu 19.04.
First, add this to your `$HOME/.bashrc` (or some other script that you run):
```bash
export RISCV=$HOME/riscv
export PATH=$RISCV/bin:$PATH
export QEMU_LD_PREFIX=/usr/riscv64-linux-gnu
```
Next, install the toolchain packages like so:
```bash
# apt install autoconf automake binutils-riscv64-linux-gnu build-essential gcc-riscv64-linux-gnu gdb-multiarch g++-riscv64-linux-gnu libtool qemu qemu-system-misc qemu-user qemu-user-static
```
You will now have all the toolchain binaries in `/usr/bin`.
### Building manually
This approach may be somewhat unstable since you will be using the latest
versions of the various parts of the toolchain.
First, add this to your `$HOME/.bashrc` (or some other script that you run):
First, add these to your `.bashrc` (or some other script that you run):
```bash
export RISCV=$HOME/riscv
@@ -61,42 +39,47 @@ export PATH=$RISCV/bin:$PATH
export QEMU_LD_PREFIX=$RISCV/sysroot
```
Next, install some dependencies needed to build the toolchain:
Install some dependencies needed to build the toolchain:
```console
# apt install autoconf automake autotools-dev curl libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev libexpat-dev
# apt install autoconf automake autotools-dev curl libmpc-dev libmpfr-dev libgmp-dev libusb-1.0-0-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev device-tree-compiler pkg-config libexpat-dev libglib2.0-dev libpixman-1-dev
```
Finally, build the toolchain:
Now you can build the toolchain:
```console
$ git clone --recursive [email protected]:riscv/riscv-gnu-toolchain.git
$ git clone --recursive [email protected]:riscv/riscv-tools.git
$ cd riscv-tools
$ ./build.sh
$ cd riscv-gnu-toolchain
$ ./configure --prefix=$RISCV --enable-linux --enable-multilib --with-arch=rv64imafdc --with-abi=lp64d
$ ./configure --prefix=$RISCV --enable-multilib
$ make linux
$ cd ../..
$ git clone --recursive [email protected]:riscv/riscv-qemu.git
$ cd riscv-qemu
$ mkdir build
$ cd build
$ ../configure --prefix=$RISCV --disable-werror
$ make
$ make install
```
This will install the built toolchain binaries in `$RISCV/bin`.
## Building Mono with a cross toolchain
Building Mono is quite straightforward:
```console
$ ./autogen.sh --prefix=$RISCV/sysroot --host=riscv64-linux-gnu
$ ./autogen.sh --prefix=$RISCV/sysroot --host=riscv64-unknown-linux-gnu
$ make
$ make install
```
(Note: You may need to use `--host=riscv64-unknown-linux-gnu` instead if you
built the toolchain manually.)
You can set `CFLAGS` as appropriate to change the RISC-V options, such as which
standard extensions and ABI to use. For example, to use the 64-bit soft float
ABI:
```console
$ CFLAGS="-mabi=lp64" ./autogen.sh --prefix=$RISCV/sysroot --host=riscv64-linux-gnu
$ CFLAGS="-mabi=lp64" ./autogen.sh --prefix=$RISCV/sysroot --host=riscv64-unknown-linux-gnu
```
Note that, since this is a cross build, the `mcs` directory won't be built. You
@@ -106,24 +89,19 @@ Mono and copy them into `$RISCV/sysroot`.
You can run Mono with QEMU like this:
```console
$ qemu-riscv64 ./mono/mini/mono hello.exe
$ qemu-riscv64 $RISCV/sysroot/bin/mono hello.exe
```
## Debugging
Debugging with GDB currently requires a manually built toolchain.
It can be done like so:
```console
$ qemu-riscv64 -g 12345 ./mono/mini/mono --interp basic.exe &
$ riscv64-unknown-elf-gdb -ex 'target remote localhost:12345' -ex 'b main' -ex 'c' ./mono/mini/mono
$ qemu-riscv64 -g 12345 ./mono/mini/mono-sgen --interp basic.exe &
$ riscv64-unknown-elf-gdb -ex 'target remote localhost:12345' -ex 'b main' -ex 'c' ./mono/mini/mono-sgen
```
## Things to be done
Things that need to be done beyond the basic 64-bit port, in no particular
order:
In no particular order:
* Complete the soft float port.
* Complete the 32-bit port.
+8 -8
View File
@@ -1,13 +1,13 @@
<?xml version="1.0" encoding="utf-8"?>
<Dependencies>
<ProductDependencies>
<Dependency Name="Microsoft.Private.CoreFx.NETCoreApp" Version="5.0.0-alpha.1.19563.3">
<Dependency Name="Microsoft.Private.CoreFx.NETCoreApp" Version="5.0.0-alpha1.19502.7">
<Uri>https://github.com/dotnet/corefx</Uri>
<Sha>5cee7c97d602f294e27c582d4dab81ec388f1d7b</Sha>
<Sha>a50e056c5a62fb6dfe2e9475be47b93d33661700</Sha>
</Dependency>
<Dependency Name="Microsoft.NETCore.App" Version="5.0.0-alpha.1.19564.1">
<Dependency Name="Microsoft.NETCore.App" Version="5.0.0-alpha1.19476.2">
<Uri>https://github.com/dotnet/core-setup</Uri>
<Sha>c77948d92a2f950140f09384f057cb893ec3955a</Sha>
<Sha>5a0e8cf49b21c1c6551296f9ee02225c49cc4940</Sha>
</Dependency>
<Dependency Name="Microsoft.Net.Compilers" Version="3.3.1-beta4-19476-06">
<Uri>https://github.com/dotnet/roslyn</Uri>
@@ -15,13 +15,13 @@
</Dependency>
</ProductDependencies>
<ToolsetDependencies>
<Dependency Name="Microsoft.DotNet.Arcade.Sdk" Version="5.0.0-beta.19567.2">
<Dependency Name="Microsoft.DotNet.Arcade.Sdk" Version="5.0.0-beta.19473.5">
<Uri>https://github.com/dotnet/arcade</Uri>
<Sha>928efaa081ffd17b37f6c662fee44775f2d0b90f</Sha>
<Sha>ef4b288de587f0b86e65b3950e9095f714808ade</Sha>
</Dependency>
<Dependency Name="Microsoft.DotNet.Helix.Sdk" Version="5.0.0-beta.19567.2">
<Dependency Name="Microsoft.DotNet.Helix.Sdk" Version="5.0.0-beta.19473.5">
<Uri>https://github.com/dotnet/arcade</Uri>
<Sha>928efaa081ffd17b37f6c662fee44775f2d0b90f</Sha>
<Sha>ef4b288de587f0b86e65b3950e9095f714808ade</Sha>
</Dependency>
</ToolsetDependencies>
</Dependencies>
+2 -2
View File
@@ -5,9 +5,9 @@
<PreReleaseVersionLabel>prerelease</PreReleaseVersionLabel>
<!-- Package versions -->
<!-- corefx -->
<MicrosoftPrivateCoreFxNETCoreAppVersion>5.0.0-alpha.1.19563.3</MicrosoftPrivateCoreFxNETCoreAppVersion>
<MicrosoftPrivateCoreFxNETCoreAppVersion>5.0.0-alpha1.19502.7</MicrosoftPrivateCoreFxNETCoreAppVersion>
<!-- core-setup -->
<MicrosoftNETCoreAppVersion>5.0.0-alpha.1.19564.1</MicrosoftNETCoreAppVersion>
<MicrosoftNETCoreAppVersion>5.0.0-alpha1.19476.2</MicrosoftNETCoreAppVersion>
<!-- roslyn -->
<MicrosoftNetCompilersVersion>3.3.1-beta4-19476-06</MicrosoftNetCompilersVersion>
</PropertyGroup>
+2 -4
View File
@@ -37,8 +37,6 @@
<PropertyGroup>
<DotNetSymbolExpirationInDays Condition="'$(DotNetSymbolExpirationInDays)' == ''">3650</DotNetSymbolExpirationInDays>
<PublishToSymbolServer>true</PublishToSymbolServer>
<PublishToSymWeb Condition="'$(PublishToSymWeb)' == ''">true</PublishToSymWeb>
<PublishToMSDL Condition="'$(PublishToMSDL)' == ''">true</PublishToMSDL>
<PublishToSymbolServer Condition="'@(FilesToPublishToSymbolServer)' == '' and '@(PackagesToPublishToSymbolServer)' == ''">false</PublishToSymbolServer>
</PropertyGroup>
@@ -58,7 +56,7 @@
DryRun="false"
ConvertPortablePdbsToWindowsPdbs="false"
PdbConversionTreatAsWarning=""
Condition="$(PublishToSymbolServer) and $(PublishToMSDL)"/>
Condition="$(PublishToSymbolServer)"/>
<!--
Symbol Uploader: SymWeb
@@ -75,7 +73,7 @@
DryRun="false"
ConvertPortablePdbsToWindowsPdbs="false"
PdbConversionTreatAsWarning=""
Condition="$(PublishToSymbolServer) and $(PublishToSymWeb)"/>
Condition="$(PublishToSymbolServer)"/>
</Target>
<ItemGroup>
-127
View File
@@ -1,127 +0,0 @@
# This file is a temporary workaround for internal builds to be able to restore from private AzDO feeds.
# This file should be removed as part of this issue: https://github.com/dotnet/arcade/issues/4080
#
# What the script does is iterate over all package sources in the pointed NuGet.config and add a credential entry
# under <packageSourceCredentials> for each Maestro managed private feed. Two additional credential
# entries are also added for the two private static internal feeds: dotnet3-internal and dotnet3-internal-transport.
#
# This script needs to be called in every job that will restore packages and which the base repo has
# private AzDO feeds in the NuGet.config.
#
# See example YAML call for this script below. Note the use of the variable `$(dn-bot-dnceng-artifact-feeds-rw)`
# from the AzureDevOps-Artifact-Feeds-Pats variable group.
#
# - task: PowerShell@2
# displayName: Setup Private Feeds Credentials
# condition: eq(variables['Agent.OS'], 'Windows_NT')
# inputs:
# filePath: $(Build.SourcesDirectory)/eng/common/SetupNugetSources.ps1
# arguments: -ConfigFile ${Env:BUILD_SOURCESDIRECTORY}/NuGet.config -Password $Env:Token
# env:
# Token: $(dn-bot-dnceng-artifact-feeds-rw)
[CmdletBinding()]
param (
[Parameter(Mandatory = $true)][string]$ConfigFile,
[Parameter(Mandatory = $true)][string]$Password
)
$ErrorActionPreference = "Stop"
Set-StrictMode -Version 2.0
[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
. $PSScriptRoot\tools.ps1
# Add source entry to PackageSources
function AddPackageSource($sources, $SourceName, $SourceEndPoint, $creds, $Username, $Password) {
$packageSource = $sources.SelectSingleNode("add[@key='$SourceName']")
if ($packageSource -eq $null)
{
$packageSource = $doc.CreateElement("add")
$packageSource.SetAttribute("key", $SourceName)
$packageSource.SetAttribute("value", $SourceEndPoint)
$sources.AppendChild($packageSource) | Out-Null
}
else {
Write-Host "Package source $SourceName already present."
}
AddCredential -Creds $creds -Source $SourceName -Username $Username -Password $Password
}
# Add a credential node for the specified source
function AddCredential($creds, $source, $username, $password) {
# Looks for credential configuration for the given SourceName. Create it if none is found.
$sourceElement = $creds.SelectSingleNode($Source)
if ($sourceElement -eq $null)
{
$sourceElement = $doc.CreateElement($Source)
$creds.AppendChild($sourceElement) | Out-Null
}
# Add the <Username> node to the credential if none is found.
$usernameElement = $sourceElement.SelectSingleNode("add[@key='Username']")
if ($usernameElement -eq $null)
{
$usernameElement = $doc.CreateElement("add")
$usernameElement.SetAttribute("key", "Username")
$sourceElement.AppendChild($usernameElement) | Out-Null
}
$usernameElement.SetAttribute("value", $Username)
# Add the <ClearTextPassword> to the credential if none is found.
# Add it as a clear text because there is no support for encrypted ones in non-windows .Net SDKs.
# -> https://github.com/NuGet/Home/issues/5526
$passwordElement = $sourceElement.SelectSingleNode("add[@key='ClearTextPassword']")
if ($passwordElement -eq $null)
{
$passwordElement = $doc.CreateElement("add")
$passwordElement.SetAttribute("key", "ClearTextPassword")
$sourceElement.AppendChild($passwordElement) | Out-Null
}
$passwordElement.SetAttribute("value", $Password)
}
function InsertMaestroPrivateFeedCredentials($Sources, $Creds, $Password) {
$maestroPrivateSources = $Sources.SelectNodes("add[contains(@key,'darc-int')]")
Write-Host "Inserting credentials for $($maestroPrivateSources.Count) Maestro's private feeds."
ForEach ($PackageSource in $maestroPrivateSources) {
Write-Host "`tInserting credential for Maestro's feed:" $PackageSource.Key
AddCredential -Creds $creds -Source $PackageSource.Key -Username $Username -Password $Password
}
}
if (!(Test-Path $ConfigFile -PathType Leaf)) {
Write-Host "Couldn't find the file NuGet config file: $ConfigFile"
ExitWithExitCode 1
}
# Load NuGet.config
$doc = New-Object System.Xml.XmlDocument
$filename = (Get-Item $ConfigFile).FullName
$doc.Load($filename)
# Get reference to <PackageSources> or create one if none exist already
$sources = $doc.DocumentElement.SelectSingleNode("packageSources")
if ($sources -eq $null) {
$sources = $doc.CreateElement("packageSources")
$doc.DocumentElement.AppendChild($sources) | Out-Null
}
# Looks for a <PackageSourceCredentials> node. Create it if none is found.
$creds = $doc.DocumentElement.SelectSingleNode("packageSourceCredentials")
if ($creds -eq $null) {
$creds = $doc.CreateElement("packageSourceCredentials")
$doc.DocumentElement.AppendChild($creds) | Out-Null
}
# Insert credential nodes for Maestro's private feeds
InsertMaestroPrivateFeedCredentials -Sources $sources -Creds $creds -Password $Password
AddPackageSource -Sources $sources -SourceName "dotnet3-internal" -SourceEndPoint "https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal/nuget/v2" -Creds $creds -Username "dn-bot" -Password $Password
AddPackageSource -Sources $sources -SourceName "dotnet3-internal-transport" -SourceEndPoint "https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-transport/nuget/v2" -Creds $creds -Username "dn-bot" -Password $Password
$doc.Save($filename)
-117
View File
@@ -1,117 +0,0 @@
#!/usr/bin/env bash
# This file is a temporary workaround for internal builds to be able to restore from private AzDO feeds.
# This file should be removed as part of this issue: https://github.com/dotnet/arcade/issues/4080
#
# What the script does is iterate over all package sources in the pointed NuGet.config and add a credential entry
# under <packageSourceCredentials> for each Maestro's managed private feed. Two additional credential
# entries are also added for the two private static internal feeds: dotnet3-internal and dotnet3-internal-transport.
#
# This script needs to be called in every job that will restore packages and which the base repo has
# private AzDO feeds in the NuGet.config.
#
# See example YAML call for this script below. Note the use of the variable `$(dn-bot-dnceng-artifact-feeds-rw)`
# from the AzureDevOps-Artifact-Feeds-Pats variable group.
#
# - task: Bash@3
# displayName: Setup Private Feeds Credentials
# inputs:
# filePath: $(Build.SourcesDirectory)/eng/common/SetupNugetSources.sh
# arguments: $BUILD_SOURCESDIRECTORY/NuGet.config $Token
# condition: ne(variables['Agent.OS'], 'Windows_NT')
# env:
# Token: $(dn-bot-dnceng-artifact-feeds-rw)
ConfigFile=$1
CredToken=$2
NL='\n'
TB=' '
source="${BASH_SOURCE[0]}"
# resolve $source until the file is no longer a symlink
while [[ -h "$source" ]]; do
scriptroot="$( cd -P "$( dirname "$source" )" && pwd )"
source="$(readlink "$source")"
# if $source was a relative symlink, we need to resolve it relative to the path where the
# symlink file was located
[[ $source != /* ]] && source="$scriptroot/$source"
done
scriptroot="$( cd -P "$( dirname "$source" )" && pwd )"
. "$scriptroot/tools.sh"
if [ ! -f "$ConfigFile" ]; then
echo "Couldn't find the file NuGet config file: $ConfigFile"
ExitWithExitCode 1
fi
if [[ `uname -s` == "Darwin" ]]; then
NL=$'\\\n'
TB=''
fi
# Ensure there is a <packageSources>...</packageSources> section.
grep -i "<packageSources>" $ConfigFile
if [ "$?" != "0" ]; then
echo "Adding <packageSources>...</packageSources> section."
ConfigNodeHeader="<configuration>"
PackageSourcesTemplate="${TB}<packageSources>${NL}${TB}</packageSources>"
sed -i.bak "s|$ConfigNodeHeader|$ConfigNodeHeader${NL}$PackageSourcesTemplate|" NuGet.config
fi
# Ensure there is a <packageSourceCredentials>...</packageSourceCredentials> section.
grep -i "<packageSourceCredentials>" $ConfigFile
if [ "$?" != "0" ]; then
echo "Adding <packageSourceCredentials>...</packageSourceCredentials> section."
PackageSourcesNodeFooter="</packageSources>"
PackageSourceCredentialsTemplate="${TB}<packageSourceCredentials>${NL}${TB}</packageSourceCredentials>"
sed -i.bak "s|$PackageSourcesNodeFooter|$PackageSourcesNodeFooter${NL}$PackageSourceCredentialsTemplate|" NuGet.config
fi
# Ensure dotnet3-internal and dotnet3-internal-transport is in the packageSources
grep -i "<add key=\"dotnet3-internal\">" $ConfigFile
if [ "$?" != "0" ]; then
echo "Adding dotnet3-internal to the packageSources."
PackageSourcesNodeFooter="</packageSources>"
PackageSourceTemplate="${TB}<add key=\"dotnet3-internal\" value=\"https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal/nuget/v2\" />"
sed -i.bak "s|$PackageSourcesNodeFooter|$PackageSourceTemplate${NL}$PackageSourcesNodeFooter|" NuGet.config
fi
# Ensure dotnet3-internal and dotnet3-internal-transport is in the packageSources
grep -i "<add key=\"dotnet3-internal-transport\">" $ConfigFile
if [ "$?" != "0" ]; then
echo "Adding dotnet3-internal-transport to the packageSources."
PackageSourcesNodeFooter="</packageSources>"
PackageSourceTemplate="${TB}<add key=\"dotnet3-internal-transport\" value=\"https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-transport/nuget/v2\" />"
sed -i.bak "s|$PackageSourcesNodeFooter|$PackageSourceTemplate${NL}$PackageSourcesNodeFooter|" NuGet.config
fi
# I want things split line by line
PrevIFS=$IFS
IFS=$'\n'
PackageSources=$(grep -oh '"darc-int-[^"]*"' $ConfigFile | tr -d '"')
IFS=$PrevIFS
PackageSources+=('dotnet3-internal')
PackageSources+=('dotnet3-internal-transport')
for FeedName in ${PackageSources[@]} ; do
# Check if there is no existing credential for this FeedName
grep -i "<$FeedName>" $ConfigFile
if [ "$?" != "0" ]; then
echo "Adding credentials for $FeedName."
PackageSourceCredentialsNodeFooter="</packageSourceCredentials>"
NewCredential="${TB}${TB}<$FeedName>${NL}<add key=\"Username\" value=\"dn-bot\" />${NL}<add key=\"ClearTextPassword\" value=\"$CredToken\" />${NL}</$FeedName>"
sed -i.bak "s|$PackageSourceCredentialsNodeFooter|$NewCredential${NL}$PackageSourceCredentialsNodeFooter|" NuGet.config
fi
done
+8 -11
View File
@@ -18,7 +18,6 @@ Param(
[switch] $sign,
[switch] $pack,
[switch] $publish,
[switch] $clean,
[switch][Alias('bl')]$binaryLog,
[switch] $ci,
[switch] $prepareMachine,
@@ -49,7 +48,6 @@ function Print-Usage() {
Write-Host " -pack Package build outputs into NuGet packages and Willow components"
Write-Host " -sign Sign build outputs"
Write-Host " -publish Publish artifacts (e.g. symbols)"
Write-Host " -clean Clean the solution"
Write-Host ""
Write-Host "Advanced settings:"
@@ -114,14 +112,6 @@ function Build {
@properties
}
if ($clean) {
if(Test-Path $ArtifactsDir) {
Remove-Item -Recurse -Force $ArtifactsDir
Write-Host "Artifacts directory deleted."
}
exit 0
}
try {
if ($help -or (($null -ne $properties) -and ($properties.Contains("/help") -or $properties.Contains("/?")))) {
Print-Usage
@@ -133,7 +123,14 @@ try {
$nodeReuse = $false
}
if ($restore) {
# Import custom tools configuration, if present in the repo.
# Note: Import in global scope so that the script set top-level variables without qualification.
$configureToolsetScript = Join-Path $EngRoot "configure-toolset.ps1"
if (Test-Path $configureToolsetScript) {
. $configureToolsetScript
}
if (($restore) -and ($null -eq $env:DisableNativeToolsetInstalls)) {
InitializeNativeTools
}
+12 -12
View File
@@ -26,7 +26,6 @@ usage()
echo " --pack Package build outputs into NuGet packages and Willow components"
echo " --sign Sign build outputs"
echo " --publish Publish artifacts (e.g. symbols)"
echo " --clean Clean the solution"
echo ""
echo "Advanced settings:"
@@ -63,7 +62,6 @@ publish=false
sign=false
public=false
ci=false
clean=false
warn_as_error=true
node_reuse=true
@@ -84,9 +82,6 @@ while [[ $# > 0 ]]; do
usage
exit 0
;;
-clean)
clean=true
;;
-configuration|-c)
configuration=$2
shift
@@ -201,15 +196,20 @@ function Build {
ExitWithExitCode 0
}
if [[ "$clean" == true ]]; then
if [ -d "$artifacts_dir" ]; then
rm -rf $artifacts_dir
echo "Artifacts directory deleted."
fi
exit 0
# Import custom tools configuration, if present in the repo.
configure_toolset_script="$eng_root/configure-toolset.sh"
if [[ -a "$configure_toolset_script" ]]; then
. "$configure_toolset_script"
fi
if [[ "$restore" == true ]]; then
# TODO: https://github.com/dotnet/arcade/issues/1468
# Temporary workaround to avoid breaking change.
# Remove once repos are updated.
if [[ -n "${useInstalledDotNetCli:-}" ]]; then
use_installed_dotnet_cli="$useInstalledDotNetCli"
fi
if [[ "$restore" == true && -z ${DisableNativeToolsetInstalls:-} ]]; then
InitializeNativeTools
fi
+34 -15
View File
@@ -31,10 +31,6 @@ else()
message(FATAL_ERROR "Arch is ${TARGET_ARCH_NAME}. Only armel, arm, arm64 and x86 are supported!")
endif()
if(DEFINED ENV{TOOLCHAIN})
set(TOOLCHAIN $ENV{TOOLCHAIN})
endif()
# Specify include paths
if(TARGET_ARCH_NAME STREQUAL "armel")
if(DEFINED TIZEN_TOOLCHAIN)
@@ -43,25 +39,48 @@ if(TARGET_ARCH_NAME STREQUAL "armel")
endif()
endif()
set(CMAKE_SYSROOT "${CROSS_ROOTFS}")
set(CMAKE_C_COMPILER_EXTERNAL_TOOLCHAIN "${CROSS_ROOTFS}/usr")
set(CMAKE_CXX_COMPILER_EXTERNAL_TOOLCHAIN "${CROSS_ROOTFS}/usr")
set(CMAKE_ASM_COMPILER_EXTERNAL_TOOLCHAIN "${CROSS_ROOTFS}/usr")
# add_compile_param - adds only new options without duplicates.
# arg0 - list with result options, arg1 - list with new options.
# arg2 - optional argument, quick summary string for optional using CACHE FORCE mode.
macro(add_compile_param)
if(NOT ${ARGC} MATCHES "^(2|3)$")
message(FATAL_ERROR "Wrong using add_compile_param! Two or three parameters must be given! See add_compile_param description.")
endif()
foreach(OPTION ${ARGV1})
if(NOT ${ARGV0} MATCHES "${OPTION}($| )")
set(${ARGV0} "${${ARGV0}} ${OPTION}")
if(${ARGC} EQUAL "3") # CACHE FORCE mode
set(${ARGV0} "${${ARGV0}}" CACHE STRING "${ARGV2}" FORCE)
endif()
endif()
endforeach()
endmacro()
# Specify link flags
add_compile_param(CROSS_LINK_FLAGS "--sysroot=${CROSS_ROOTFS}")
add_compile_param(CROSS_LINK_FLAGS "--gcc-toolchain=${CROSS_ROOTFS}/usr")
add_compile_param(CROSS_LINK_FLAGS "--target=${TOOLCHAIN}")
add_compile_param(CROSS_LINK_FLAGS "-fuse-ld=gold")
if(TARGET_ARCH_NAME STREQUAL "armel")
if(DEFINED TIZEN_TOOLCHAIN) # For Tizen only
add_link_options("-B${CROSS_ROOTFS}/usr/lib/gcc/${TIZEN_TOOLCHAIN}")
add_link_options("-L${CROSS_ROOTFS}/lib")
add_link_options("-L${CROSS_ROOTFS}/usr/lib")
add_link_options("-L${CROSS_ROOTFS}/usr/lib/gcc/${TIZEN_TOOLCHAIN}")
add_compile_param(CROSS_LINK_FLAGS "-B${CROSS_ROOTFS}/usr/lib/gcc/${TIZEN_TOOLCHAIN}")
add_compile_param(CROSS_LINK_FLAGS "-L${CROSS_ROOTFS}/lib")
add_compile_param(CROSS_LINK_FLAGS "-L${CROSS_ROOTFS}/usr/lib")
add_compile_param(CROSS_LINK_FLAGS "-L${CROSS_ROOTFS}/usr/lib/gcc/${TIZEN_TOOLCHAIN}")
endif()
elseif(TARGET_ARCH_NAME STREQUAL "x86")
add_link_options(-m32)
add_compile_param(CROSS_LINK_FLAGS "-m32")
endif()
add_compile_param(CMAKE_EXE_LINKER_FLAGS "${CROSS_LINK_FLAGS}" "TOOLCHAIN_EXE_LINKER_FLAGS")
add_compile_param(CMAKE_SHARED_LINKER_FLAGS "${CROSS_LINK_FLAGS}" "TOOLCHAIN_EXE_LINKER_FLAGS")
add_compile_param(CMAKE_MODULE_LINKER_FLAGS "${CROSS_LINK_FLAGS}" "TOOLCHAIN_EXE_LINKER_FLAGS")
# Specify compile options
add_compile_options("--sysroot=${CROSS_ROOTFS}")
add_compile_options("--target=${TOOLCHAIN}")
add_compile_options("--gcc-toolchain=${CROSS_ROOTFS}/usr")
if(TARGET_ARCH_NAME MATCHES "^(arm|armel|arm64)$")
set(CMAKE_C_COMPILER_TARGET ${TOOLCHAIN})
@@ -84,7 +103,7 @@ elseif(TARGET_ARCH_NAME STREQUAL "x86")
add_compile_options(-Wno-error=unused-command-line-argument)
endif()
# Set LLDB include and library paths for builds that need lldb.
# Set LLDB include and library paths
if(TARGET_ARCH_NAME MATCHES "^(arm|armel|x86)$")
if(TARGET_ARCH_NAME STREQUAL "x86")
set(LLVM_CROSS_DIR "$ENV{LLVM_CROSS_HOME}")
@@ -112,7 +131,7 @@ if(TARGET_ARCH_NAME MATCHES "^(arm|armel|x86)$")
endif()
endif()
set(CMAKE_FIND_ROOT_PATH "${CROSS_ROOTFS}")
set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
+3 -8
View File
@@ -1,8 +1,7 @@
param (
$darcVersion = $null,
$versionEndpoint = "https://maestro-prod.westus2.cloudapp.azure.com/api/assets/darc-version?api-version=2019-01-16",
$verbosity = "m",
$toolpath = $null
$verbosity = "m"
)
. $PSScriptRoot\tools.ps1
@@ -24,15 +23,11 @@ function InstallDarcCli ($darcVersion) {
$darcVersion = $(Invoke-WebRequest -Uri $versionEndpoint -UseBasicParsing).Content
}
$arcadeServicesSource = 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
$arcadeServicesSource = 'https://dotnetfeed.blob.core.windows.net/dotnet-core/index.json'
Write-Host "Installing Darc CLI version $darcVersion..."
Write-Host "You may need to restart your command window if this is the first dotnet tool you have installed."
if (-not $toolpath) {
& "$dotnet" tool install $darcCliPackageName --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity -g
}else {
& "$dotnet" tool install $darcCliPackageName --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity --tool-path "$toolpath"
}
& "$dotnet" tool install $darcCliPackageName --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity -g
}
InstallDarcCli $darcVersion
+6 -20
View File
@@ -20,10 +20,6 @@ while [[ $# > 0 ]]; do
verbosity=$2
shift
;;
--toolpath)
toolpath=$2
shift
;;
*)
echo "Invalid argument: $1"
usage
@@ -56,27 +52,17 @@ function InstallDarcCli {
InitializeDotNetCli
local dotnet_root=$_InitializeDotNetCli
if [ -z "$toolpath" ]; then
local tool_list=$($dotnet_root/dotnet tool list -g)
if [[ $tool_list = *$darc_cli_package_name* ]]; then
echo $($dotnet_root/dotnet tool uninstall $darc_cli_package_name -g)
fi
else
local tool_list=$($dotnet_root/dotnet tool list --tool-path "$toolpath")
if [[ $tool_list = *$darc_cli_package_name* ]]; then
echo $($dotnet_root/dotnet tool uninstall $darc_cli_package_name --tool-path "$toolpath")
fi
local uninstall_command=`$dotnet_root/dotnet tool uninstall $darc_cli_package_name -g`
local tool_list=$($dotnet_root/dotnet tool list -g)
if [[ $tool_list = *$darc_cli_package_name* ]]; then
echo $($dotnet_root/dotnet tool uninstall $darc_cli_package_name -g)
fi
local arcadeServicesSource="https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json"
local arcadeServicesSource="https://dotnetfeed.blob.core.windows.net/dotnet-core/index.json"
echo "Installing Darc CLI version $darcVersion..."
echo "You may need to restart your command shell if this is the first dotnet tool you have installed."
if [ -z "$toolpath" ]; then
echo $($dotnet_root/dotnet tool install $darc_cli_package_name --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity -g)
else
echo $($dotnet_root/dotnet tool install $darc_cli_package_name --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity --tool-path "$toolpath")
fi
echo $($dotnet_root/dotnet tool install $darc_cli_package_name --version $darcVersion --add-source "$arcadeServicesSource" -v $verbosity -g)
}
InstallDarcCli
+2 -4
View File
@@ -3,9 +3,7 @@ Param(
[string] $verbosity = "minimal",
[string] $architecture = "",
[string] $version = "Latest",
[string] $runtime = "dotnet",
[string] $RuntimeSourceFeed = "",
[string] $RuntimeSourceFeedKey = ""
[string] $runtime = "dotnet"
)
. $PSScriptRoot\tools.ps1
@@ -17,7 +15,7 @@ try {
if ($architecture -and $architecture.Trim() -eq "x86") {
$installdir = Join-Path $installdir "x86"
}
InstallDotNet $installdir $version $architecture $runtime $true -RuntimeSourceFeed $RuntimeSourceFeed -RuntimeSourceFeedKey $RuntimeSourceFeedKey
InstallDotNet $installdir $version $architecture $runtime $true
}
catch {
Write-Host $_
+2 -41
View File
@@ -14,8 +14,6 @@ scriptroot="$( cd -P "$( dirname "$source" )" && pwd )"
version='Latest'
architecture=''
runtime='dotnet'
runtimeSourceFeed=''
runtimeSourceFeedKey=''
while [[ $# > 0 ]]; do
opt="$(echo "$1" | awk '{print tolower($0)}')"
case "$opt" in
@@ -31,55 +29,18 @@ while [[ $# > 0 ]]; do
shift
runtime="$1"
;;
-runtimesourcefeed)
shift
runtimeSourceFeed="$1"
;;
-runtimesourcefeedkey)
shift
runtimeSourceFeedKey="$1"
;;
*)
echo "Invalid argument: $1"
usage
exit 1
;;
esac
shift
done
# Use uname to determine what the CPU is.
cpuname=$(uname -p)
# Some Linux platforms report unknown for platform, but the arch for machine.
if [[ "$cpuname" == "unknown" ]]; then
cpuname=$(uname -m)
fi
case $cpuname in
aarch64)
buildarch=arm64
;;
amd64|x86_64)
buildarch=x64
;;
armv7l)
buildarch=arm
;;
i686)
buildarch=x86
;;
*)
echo "Unknown CPU $cpuname detected, treating it as x64"
buildarch=x64
;;
esac
. "$scriptroot/tools.sh"
dotnetRoot="$repo_root/.dotnet"
if [[ $architecture != "" ]] && [[ $architecture != $buildarch ]]; then
dotnetRoot="$dotnetRoot/$architecture"
fi
InstallDotNet $dotnetRoot $version "$architecture" $runtime true $runtimeSourceFeed $runtimeSourceFeedKey || {
InstallDotNet $dotnetRoot $version "$architecture" $runtime true || {
local exit_code=$?
echo "dotnet-install.sh failed (exit code '$exit_code')." >&2
ExitWithExitCode $exit_code
-1
View File
@@ -133,7 +133,6 @@ try {
if (Test-Path $InstallBin) {
Write-Host "Native tools are available from" (Convert-Path -Path $InstallBin)
Write-Host "##vso[task.prependpath]$(Convert-Path -Path $InstallBin)"
return $InstallBin
}
else {
Write-Error "Native tools install directory does not exist, installation failed"
@@ -8,7 +8,6 @@ Set-StrictMode -Version 2.0
# scripts don't necessarily execute in the same agent that run the
# build.ps1/sh script this variable isn't automatically set.
$ci = $true
$disableConfigureToolsetImport = "true"
. $PSScriptRoot\..\tools.ps1
function Create-MaestroApiRequestHeaders([string]$ContentType = "application/json") {
@@ -0,0 +1,26 @@
param(
[Parameter(Mandatory=$true)][string] $ReleaseConfigsPath # Full path to ReleaseConfigs.txt asset
)
. $PSScriptRoot\post-build-utils.ps1
try {
$Content = Get-Content $ReleaseConfigsPath
$BarId = $Content | Select -Index 0
$Channels = ""
$Content | Select -Index 1 | ForEach-Object { $Channels += "$_ ," }
$IsStableBuild = $Content | Select -Index 2
Write-PipelineSetVariable -Name 'BARBuildId' -Value $BarId
Write-PipelineSetVariable -Name 'InitialChannels' -Value "$Channels"
Write-PipelineSetVariable -Name 'IsStableBuild' -Value $IsStableBuild
}
catch {
Write-Host $_
Write-Host $_.Exception
Write-Host $_.ScriptStackTrace
ExitWithExitCode 1
}
+26 -26
View File
@@ -1,30 +1,30 @@
Param(
[string] $GuardianPackageName, # Required: the name of guardian CLI package (not needed if GuardianCliLocation is specified)
[string] $NugetPackageDirectory, # Required: directory where NuGet packages are installed (not needed if GuardianCliLocation is specified)
[string] $GuardianCliLocation, # Optional: Direct location of Guardian CLI executable if GuardianPackageName & NugetPackageDirectory are not specified
[string] $Repository=$env:BUILD_REPOSITORY_NAME, # Required: the name of the repository (e.g. dotnet/arcade)
[string] $BranchName=$env:BUILD_SOURCEBRANCH, # Optional: name of branch or version of gdn settings; defaults to master
[string] $SourceDirectory=$env:BUILD_SOURCESDIRECTORY, # Required: the directory where source files are located
[string] $ArtifactsDirectory = (Join-Path $env:BUILD_ARTIFACTSTAGINGDIRECTORY ("artifacts")), # Required: the directory where build artifacts are located
[string] $AzureDevOpsAccessToken, # Required: access token for dnceng; should be provided via KeyVault
[string[]] $SourceToolsList, # Optional: list of SDL tools to run on source code
[string[]] $ArtifactToolsList, # Optional: list of SDL tools to run on built artifacts
[bool] $TsaPublish=$False, # Optional: true will publish results to TSA; only set to true after onboarding to TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaBranchName=$env:BUILD_SOURCEBRANCH, # Optional: required for TSA publish; defaults to $(Build.SourceBranchName); TSA is the automated framework used to upload test results as bugs.
[string] $TsaRepositoryName=$env:BUILD_REPOSITORY_NAME, # Optional: TSA repository name; will be generated automatically if not submitted; TSA is the automated framework used to upload test results as bugs.
[string] $BuildNumber=$env:BUILD_BUILDNUMBER, # Optional: required for TSA publish; defaults to $(Build.BuildNumber)
[bool] $UpdateBaseline=$False, # Optional: if true, will update the baseline in the repository; should only be run after fixing any issues which need to be fixed
[bool] $TsaOnboard=$False, # Optional: if true, will onboard the repository to TSA; should only be run once; TSA is the automated framework used to upload test results as bugs.
[string] $TsaInstanceUrl, # Optional: only needed if TsaOnboard or TsaPublish is true; the instance-url registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaCodebaseName, # Optional: only needed if TsaOnboard or TsaPublish is true; the name of the codebase registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaProjectName, # Optional: only needed if TsaOnboard or TsaPublish is true; the name of the project registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaNotificationEmail, # Optional: only needed if TsaOnboard is true; the email(s) which will receive notifications of TSA bug filings (e.g. [email protected]); TSA is the automated framework used to upload test results as bugs.
[string] $TsaCodebaseAdmin, # Optional: only needed if TsaOnboard is true; the aliases which are admins of the TSA codebase (e.g. DOMAIN\alias); TSA is the automated framework used to upload test results as bugs.
[string] $TsaBugAreaPath, # Optional: only needed if TsaOnboard is true; the area path where TSA will file bugs in AzDO; TSA is the automated framework used to upload test results as bugs.
[string] $TsaIterationPath, # Optional: only needed if TsaOnboard is true; the iteration path where TSA will file bugs in AzDO; TSA is the automated framework used to upload test results as bugs.
[string] $GuardianLoggerLevel="Standard", # Optional: the logger level for the Guardian CLI; options are Trace, Verbose, Standard, Warning, and Error
[string[]] $CrScanAdditionalRunConfigParams, # Optional: Additional Params to custom build a CredScan run config in the format @("xyz:abc","sdf:1")
[string[]] $PoliCheckAdditionalRunConfigParams # Optional: Additional Params to custom build a Policheck run config in the format @("xyz:abc","sdf:1")
[string] $GuardianPackageName, # Required: the name of guardian CLI package (not needed if GuardianCliLocation is specified)
[string] $NugetPackageDirectory, # Required: directory where NuGet packages are installed (not needed if GuardianCliLocation is specified)
[string] $GuardianCliLocation, # Optional: Direct location of Guardian CLI executable if GuardianPackageName & NugetPackageDirectory are not specified
[string] $Repository=$env:BUILD_REPOSITORY_NAME, # Required: the name of the repository (e.g. dotnet/arcade)
[string] $BranchName=$env:BUILD_SOURCEBRANCH, # Optional: name of branch or version of gdn settings; defaults to master
[string] $SourceDirectory=$env:BUILD_SOURCESDIRECTORY, # Required: the directory where source files are located
[string] $ArtifactsDirectory = (Join-Path $env:BUILD_SOURCESDIRECTORY ("artifacts")), # Required: the directory where build artifacts are located
[string] $AzureDevOpsAccessToken, # Required: access token for dnceng; should be provided via KeyVault
[string[]] $SourceToolsList, # Optional: list of SDL tools to run on source code
[string[]] $ArtifactToolsList, # Optional: list of SDL tools to run on built artifacts
[bool] $TsaPublish=$False, # Optional: true will publish results to TSA; only set to true after onboarding to TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaBranchName=$env:BUILD_SOURCEBRANCH, # Optional: required for TSA publish; defaults to $(Build.SourceBranchName); TSA is the automated framework used to upload test results as bugs.
[string] $TsaRepositoryName=$env:BUILD_REPOSITORY_NAME, # Optional: TSA repository name; will be generated automatically if not submitted; TSA is the automated framework used to upload test results as bugs.
[string] $BuildNumber=$env:BUILD_BUILDNUMBER, # Optional: required for TSA publish; defaults to $(Build.BuildNumber)
[bool] $UpdateBaseline=$False, # Optional: if true, will update the baseline in the repository; should only be run after fixing any issues which need to be fixed
[bool] $TsaOnboard=$False, # Optional: if true, will onboard the repository to TSA; should only be run once; TSA is the automated framework used to upload test results as bugs.
[string] $TsaInstanceUrl, # Optional: only needed if TsaOnboard or TsaPublish is true; the instance-url registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaCodebaseName, # Optional: only needed if TsaOnboard or TsaPublish is true; the name of the codebase registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaProjectName, # Optional: only needed if TsaOnboard or TsaPublish is true; the name of the project registered with TSA; TSA is the automated framework used to upload test results as bugs.
[string] $TsaNotificationEmail, # Optional: only needed if TsaOnboard is true; the email(s) which will receive notifications of TSA bug filings (e.g. [email protected]); TSA is the automated framework used to upload test results as bugs.
[string] $TsaCodebaseAdmin, # Optional: only needed if TsaOnboard is true; the aliases which are admins of the TSA codebase (e.g. DOMAIN\alias); TSA is the automated framework used to upload test results as bugs.
[string] $TsaBugAreaPath, # Optional: only needed if TsaOnboard is true; the area path where TSA will file bugs in AzDO; TSA is the automated framework used to upload test results as bugs.
[string] $TsaIterationPath, # Optional: only needed if TsaOnboard is true; the iteration path where TSA will file bugs in AzDO; TSA is the automated framework used to upload test results as bugs.
[string] $GuardianLoggerLevel="Standard", # Optional: the logger level for the Guardian CLI; options are Trace, Verbose, Standard, Warning, and Error
[string[]] $CrScanAdditionalRunConfigParams, # Optional: Additional Params to custom build a CredScan run config in the format @("xyz:abc","sdf:1")
[string[]] $PoliCheckAdditionalRunConfigParams # Optional: Additional Params to custom build a Policheck run config in the format @("xyz:abc","sdf:1")
)
$ErrorActionPreference = "Stop"
@@ -10,7 +10,6 @@ Set-StrictMode -Version 2.0
# scripts don't necessarily execute in the same agent that run the
# build.ps1/sh script this variable isn't automatically set.
$ci = $true
$disableConfigureToolsetImport = "true"
. $PSScriptRoot\..\tools.ps1
$ExtractPackage = {
+11 -25
View File
@@ -6,11 +6,6 @@ parameters:
# This can also be remedied by the caller (post-build.yml) if it does not use a nested parameter
sdlContinueOnError: false # optional: determines whether to continue the build if the step errors;
dependsOn: '' # Optional: dependencies of the job
artifactNames: '' # Optional: patterns supplied to DownloadBuildArtifacts
# Usage:
# artifactNames:
# - 'BlobArtifacts'
# - 'Artifacts_Windows_NT_Release'
jobs:
- job: Run_SDL
@@ -23,30 +18,21 @@ jobs:
steps:
- checkout: self
clean: true
- ${{ if ne(parameters.artifactNames, '') }}:
- ${{ each artifactName in parameters.artifactNames }}:
- task: DownloadBuildArtifacts@0
displayName: Download Build Artifacts
inputs:
buildType: current
artifactName: ${{ artifactName }}
downloadPath: $(Build.ArtifactStagingDirectory)\artifacts
- ${{ if eq(parameters.artifactNames, '') }}:
- task: DownloadBuildArtifacts@0
displayName: Download Build Artifacts
inputs:
buildType: current
downloadType: specific files
itemPattern: "**"
downloadPath: $(Build.ArtifactStagingDirectory)\artifacts
- task: DownloadBuildArtifacts@0
displayName: Download Build Artifacts
inputs:
buildType: current
downloadType: specific files
matchingPattern: "**"
downloadPath: $(Build.SourcesDirectory)\artifacts
- powershell: eng/common/sdl/extract-artifact-packages.ps1
-InputPath $(Build.ArtifactStagingDirectory)\artifacts\BlobArtifacts
-ExtractPath $(Build.ArtifactStagingDirectory)\artifacts\BlobArtifacts
-InputPath $(Build.SourcesDirectory)\artifacts\BlobArtifacts
-ExtractPath $(Build.SourcesDirectory)\artifacts\BlobArtifacts
displayName: Extract Blob Artifacts
continueOnError: ${{ parameters.sdlContinueOnError }}
- powershell: eng/common/sdl/extract-artifact-packages.ps1
-InputPath $(Build.ArtifactStagingDirectory)\artifacts\PackageArtifacts
-ExtractPath $(Build.ArtifactStagingDirectory)\artifacts\PackageArtifacts
-InputPath $(Build.SourcesDirectory)\artifacts\PackageArtifacts
-ExtractPath $(Build.SourcesDirectory)\artifacts\PackageArtifacts
displayName: Extract Package Artifacts
continueOnError: ${{ parameters.sdlContinueOnError }}
- task: NuGetToolInstaller@1
+1 -1
View File
@@ -17,7 +17,7 @@ parameters:
workspace: ''
# Job base template specific parameters
# See schema documentation - https://github.com/dotnet/arcade/blob/master/Documentation/AzureDevOps/TemplateSchema.md
# See schema documentation in /Documentation/AzureDevOps/TemplateSchema.md
artifacts: ''
enableMicrobuild: false
enablePublishBuildArtifacts: false
@@ -4,26 +4,20 @@ parameters:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stageName: ''
channelName: ''
channelId: ''
transportFeed: ''
shippingFeed: ''
symbolsFeed: ''
stages:
- stage: ${{ parameters.stageName }}
- stage: NetCore_Dev31_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: ${{ parameters.channelName }} Publishing
displayName: .NET Core 3.1 Dev Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job: publish_symbols
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', ${{ parameters.channelId }} ))
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicDevRelease_31_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
@@ -41,18 +35,6 @@ stages:
artifactName: 'PDBArtifacts'
continueOnError: true
# This is necessary whenever we want to publish/restore to an AzDO private feed
# Since sdk-task.ps1 tries to restore packages we need to do this authentication here
# otherwise it'll complain about accessing a private feed.
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish
inputs:
@@ -66,21 +48,17 @@ stages:
/p:Configuration=Release
${{ parameters.symbolPublishingAdditionalParameters }}
- template: ../../steps/publish-logs.yml
parameters:
StageLabel: '${{ parameters.stageName }}'
JobLabel: 'SymbolPublishing'
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', ${{ parameters.channelId }}))
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicDevRelease_31_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
@@ -89,14 +67,12 @@ stages:
inputs:
buildType: current
artifactName: PackageArtifacts
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
@@ -142,19 +118,15 @@ stages:
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:AzureDevOpsStaticShippingFeed='${{ parameters.shippingFeed }}'
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='${{ parameters.transportFeed }}'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-transport/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='${{ parameters.symbolsFeed }}'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/publish-logs.yml
parameters:
StageLabel: '${{ parameters.stageName }}'
JobLabel: 'AssetsPublishing'
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ parameters.channelId }}
ChannelId: ${{ variables.PublicDevRelease_31_Channel_Id }}
@@ -0,0 +1,132 @@
parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stages:
- stage: NetCore_Dev5_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: .NET Core 5 Dev Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.NetCore_5_Dev_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
artifactName: 'BlobArtifacts'
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download PDB Artifacts
inputs:
artifactName: 'PDBArtifacts'
continueOnError: true
- task: PowerShell@2
displayName: Publish
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishToSymbolServers -restore -msbuildEngine dotnet
/p:DotNetSymbolServerTokenMsdl=$(microsoft-symbol-server-pat)
/p:DotNetSymbolServerTokenSymWeb=$(symweb-symbol-server-pat)
/p:PDBArtifactsDirectory='$(Build.ArtifactStagingDirectory)/PDBArtifacts/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:SymbolPublishingExclusionsFile='$(Build.SourcesDirectory)/eng/SymbolPublishingExclusionsFile.txt'
/p:Configuration=Release
${{ parameters.symbolPublishingAdditionalParameters }}
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.NetCore_5_Dev_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Package Artifacts
inputs:
buildType: current
artifactName: PackageArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
inputs:
buildType: current
artifactName: AssetManifests
- task: NuGetToolInstaller@1
displayName: 'Install NuGet.exe'
# This is necessary whenever we want to publish/restore to an AzDO private feed
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish Assets
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishArtifactsInManifest -restore -msbuildEngine dotnet
/p:ArtifactsCategory=$(_DotNetArtifactsCategory)
/p:IsStableBuild=$(IsStableBuild)
/p:IsInternalBuild=$(IsInternalBuild)
/p:RepositoryName=$(Build.Repository.Name)
/p:CommitSha=$(Build.SourceVersion)
/p:NugetPath=$(NuGetExeToolPath)
/p:AzdoTargetFeedPAT='$(dn-bot-dnceng-universal-packages-rw)'
/p:AzureStorageTargetFeedPAT='$(dotnetfeed-storage-access-key-1)'
/p:BARBuildId=$(BARBuildId)
/p:MaestroApiEndpoint='$(MaestroApiEndPoint)'
/p:BuildAssetRegistryToken='$(MaestroApiAccessToken)'
/p:ManifestsBasePath='$(Build.ArtifactStagingDirectory)/AssetManifests/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts/'
/p:Configuration=Release
/p:PublishInstallersAndChecksums=${{ parameters.publishInstallersAndChecksums }}
/p:InstallersTargetStaticFeed=$(InstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5-transport/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ variables.NetCore_5_Dev_Channel_Id }}
@@ -2,28 +2,21 @@ parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stageName: ''
channelName: ''
channelId: ''
transportFeed: ''
shippingFeed: ''
symbolsFeed: ''
stages:
- stage: ${{ parameters.stageName }}
- stage: NetCore_30_Internal_Servicing_Publishing
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: ${{ parameters.channelName }} Publishing
displayName: .NET Core 3.0 Internal Servicing Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job: publish_symbols
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', ${{ parameters.channelId }} ))
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.InternalServicing_30_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
@@ -64,23 +57,19 @@ stages:
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:SymbolPublishingExclusionsFile='$(Build.SourcesDirectory)/eng/SymbolPublishingExclusionsFile.txt'
/p:Configuration=Release
/p:PublishToMSDL=false
${{ parameters.symbolPublishingAdditionalParameters }}
- template: ../../steps/publish-logs.yml
parameters:
StageLabel: '${{ parameters.stageName }}'
JobLabel: 'SymbolPublishing'
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', ${{ parameters.channelId }}))
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.InternalServicing_30_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
@@ -89,14 +78,12 @@ stages:
inputs:
buildType: current
artifactName: PackageArtifacts
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
@@ -141,20 +128,15 @@ stages:
/p:ChecksumsAzureAccountKey=$(InternalChecksumsBlobFeedKey)
/p:InstallersTargetStaticFeed=$(InternalInstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(InternalInstallersBlobFeedKey)
/p:AzureDevOpsStaticShippingFeed='${{ parameters.shippingFeed }}'
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='${{ parameters.transportFeed }}'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-transport/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='${{ parameters.symbolsFeed }}'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:PublishToMSDL=false
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/publish-logs.yml
parameters:
StageLabel: '${{ parameters.stageName }}'
JobLabel: 'AssetsPublishing'
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ parameters.channelId }}
ChannelId: ${{ variables.InternalServicing_30_Channel_Id }}
@@ -0,0 +1,132 @@
parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stages:
- stage: NetCore_Release30_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: .NET Core 3.0 Release Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicRelease_30_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
artifactName: 'BlobArtifacts'
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download PDB Artifacts
inputs:
artifactName: 'PDBArtifacts'
continueOnError: true
- task: PowerShell@2
displayName: Publish
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishToSymbolServers -restore -msbuildEngine dotnet
/p:DotNetSymbolServerTokenMsdl=$(microsoft-symbol-server-pat)
/p:DotNetSymbolServerTokenSymWeb=$(symweb-symbol-server-pat)
/p:PDBArtifactsDirectory='$(Build.ArtifactStagingDirectory)/PDBArtifacts/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:SymbolPublishingExclusionsFile='$(Build.SourcesDirectory)/eng/SymbolPublishingExclusionsFile.txt'
/p:Configuration=Release
${{ parameters.symbolPublishingAdditionalParameters }}
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicRelease_30_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Package Artifacts
inputs:
buildType: current
artifactName: PackageArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
inputs:
buildType: current
artifactName: AssetManifests
- task: NuGetToolInstaller@1
displayName: 'Install NuGet.exe'
# This is necessary whenever we want to publish/restore to an AzDO private feed
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish Assets
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishArtifactsInManifest -restore -msbuildEngine dotnet
/p:ArtifactsCategory=$(_DotNetArtifactsCategory)
/p:IsStableBuild=$(IsStableBuild)
/p:IsInternalBuild=$(IsInternalBuild)
/p:RepositoryName=$(Build.Repository.Name)
/p:CommitSha=$(Build.SourceVersion)
/p:NugetPath=$(NuGetExeToolPath)
/p:AzdoTargetFeedPAT='$(dn-bot-dnceng-universal-packages-rw)'
/p:AzureStorageTargetFeedPAT='$(dotnetfeed-storage-access-key-1)'
/p:BARBuildId=$(BARBuildId)
/p:MaestroApiEndpoint='$(MaestroApiEndPoint)'
/p:BuildAssetRegistryToken='$(MaestroApiAccessToken)'
/p:ManifestsBasePath='$(Build.ArtifactStagingDirectory)/AssetManifests/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts/'
/p:Configuration=Release
/p:PublishInstallersAndChecksums=${{ parameters.publishInstallersAndChecksums }}
/p:InstallersTargetStaticFeed=$(InstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3-transport/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ variables.PublicRelease_30_Channel_Id }}
@@ -0,0 +1,132 @@
parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stages:
- stage: NetCore_Release31_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: .NET Core 3.1 Release Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicRelease_31_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
artifactName: 'BlobArtifacts'
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download PDB Artifacts
inputs:
artifactName: 'PDBArtifacts'
continueOnError: true
- task: PowerShell@2
displayName: Publish
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishToSymbolServers -restore -msbuildEngine dotnet
/p:DotNetSymbolServerTokenMsdl=$(microsoft-symbol-server-pat)
/p:DotNetSymbolServerTokenSymWeb=$(symweb-symbol-server-pat)
/p:PDBArtifactsDirectory='$(Build.ArtifactStagingDirectory)/PDBArtifacts/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:SymbolPublishingExclusionsFile='$(Build.SourcesDirectory)/eng/SymbolPublishingExclusionsFile.txt'
/p:Configuration=Release
${{ parameters.symbolPublishingAdditionalParameters }}
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicRelease_31_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Package Artifacts
inputs:
buildType: current
artifactName: PackageArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
inputs:
buildType: current
artifactName: AssetManifests
- task: NuGetToolInstaller@1
displayName: 'Install NuGet.exe'
# This is necessary whenever we want to publish/restore to an AzDO private feed
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish Assets
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishArtifactsInManifest -restore -msbuildEngine dotnet
/p:ArtifactsCategory=$(_DotNetArtifactsCategory)
/p:IsStableBuild=$(IsStableBuild)
/p:IsInternalBuild=$(IsInternalBuild)
/p:RepositoryName=$(Build.Repository.Name)
/p:CommitSha=$(Build.SourceVersion)
/p:NugetPath=$(NuGetExeToolPath)
/p:AzdoTargetFeedPAT='$(dn-bot-dnceng-universal-packages-rw)'
/p:AzureStorageTargetFeedPAT='$(dotnetfeed-storage-access-key-1)'
/p:BARBuildId=$(BARBuildId)
/p:MaestroApiEndpoint='$(MaestroApiEndPoint)'
/p:BuildAssetRegistryToken='$(MaestroApiAccessToken)'
/p:ManifestsBasePath='$(Build.ArtifactStagingDirectory)/AssetManifests/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts/'
/p:Configuration=Release
/p:PublishInstallersAndChecksums=${{ parameters.publishInstallersAndChecksums }}
/p:InstallersTargetStaticFeed=$(InstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-transport/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ variables.PublicRelease_31_Channel_Id }}
@@ -0,0 +1,132 @@
parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
symbolPublishingAdditionalParameters: ''
stages:
- stage: NetCore_Tools_Latest_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: .NET Tools - Latest Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job:
displayName: Symbol Publishing
dependsOn: setupMaestroVars
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.NetCore_Tools_Latest_Channel_Id))
variables:
- group: DotNet-Symbol-Server-Pats
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
artifactName: 'BlobArtifacts'
continueOnError: true
- task: DownloadBuildArtifacts@0
displayName: Download PDB Artifacts
inputs:
artifactName: 'PDBArtifacts'
continueOnError: true
- task: PowerShell@2
displayName: Publish
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishToSymbolServers -restore -msbuildEngine dotnet
/p:DotNetSymbolServerTokenMsdl=$(microsoft-symbol-server-pat)
/p:DotNetSymbolServerTokenSymWeb=$(symweb-symbol-server-pat)
/p:PDBArtifactsDirectory='$(Build.ArtifactStagingDirectory)/PDBArtifacts/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:SymbolPublishingExclusionsFile='$(Build.SourcesDirectory)/eng/SymbolPublishingExclusionsFile.txt'
/p:Configuration=Release
${{ parameters.symbolPublishingAdditionalParameters }}
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.NetCore_Tools_Latest_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Package Artifacts
inputs:
buildType: current
artifactName: PackageArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
inputs:
buildType: current
artifactName: AssetManifests
- task: NuGetToolInstaller@1
displayName: 'Install NuGet.exe'
# This is necessary whenever we want to publish/restore to an AzDO private feed
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish Assets
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishArtifactsInManifest -restore -msbuildEngine dotnet
/p:ArtifactsCategory=$(_DotNetArtifactsCategory)
/p:IsStableBuild=$(IsStableBuild)
/p:IsInternalBuild=$(IsInternalBuild)
/p:RepositoryName=$(Build.Repository.Name)
/p:CommitSha=$(Build.SourceVersion)
/p:NugetPath=$(NuGetExeToolPath)
/p:AzdoTargetFeedPAT='$(dn-bot-dnceng-universal-packages-rw)'
/p:AzureStorageTargetFeedPAT='$(dotnetfeed-storage-access-key-1)'
/p:BARBuildId=$(BARBuildId)
/p:MaestroApiEndpoint='$(MaestroApiEndPoint)'
/p:BuildAssetRegistryToken='$(MaestroApiAccessToken)'
/p:ManifestsBasePath='$(Build.ArtifactStagingDirectory)/AssetManifests/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts/'
/p:Configuration=Release
/p:PublishInstallersAndChecksums=${{ parameters.publishInstallersAndChecksums }}
/p:InstallersTargetStaticFeed=$(InstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ variables.NetCore_Tools_Latest_Channel_Id }}
@@ -0,0 +1,97 @@
parameters:
artifactsPublishingAdditionalParameters: ''
dependsOn:
- Validate
publishInstallersAndChecksums: false
stages:
- stage: PVR_Publish
dependsOn: ${{ parameters.dependsOn }}
variables:
- template: ../common-variables.yml
displayName: .NET Tools - Validation Publishing
jobs:
- template: ../setup-maestro-vars.yml
- job: publish_assets
displayName: Publish Assets
dependsOn: setupMaestroVars
variables:
- group: DotNet-Blob-Feed
- group: AzureDevOps-Artifact-Feeds-Pats
- name: BARBuildId
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.BARBuildId'] ]
- name: IsStableBuild
value: $[ dependencies.setupMaestroVars.outputs['setReleaseVars.IsStableBuild'] ]
condition: contains(dependencies.setupMaestroVars.outputs['setReleaseVars.InitialChannels'], format('[{0}]', variables.PublicValidationRelease_30_Channel_Id))
pool:
vmImage: 'windows-2019'
steps:
- task: DownloadBuildArtifacts@0
displayName: Download Package Artifacts
inputs:
buildType: current
artifactName: PackageArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Blob Artifacts
inputs:
buildType: current
artifactName: BlobArtifacts
- task: DownloadBuildArtifacts@0
displayName: Download Asset Manifests
inputs:
buildType: current
artifactName: AssetManifests
- task: NuGetToolInstaller@1
displayName: 'Install NuGet.exe'
# This is necessary whenever we want to publish/restore to an AzDO private feed
- task: NuGetAuthenticate@0
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
displayName: Enable cross-org publishing
inputs:
filePath: eng\common\enable-cross-org-publishing.ps1
arguments: -token $(dn-bot-dnceng-artifact-feeds-rw)
- task: PowerShell@2
displayName: Publish Assets
inputs:
filePath: eng\common\sdk-task.ps1
arguments: -task PublishArtifactsInManifest -restore -msbuildEngine dotnet
/p:ArtifactsCategory=$(_DotNetValidationArtifactsCategory)
/p:IsStableBuild=$(IsStableBuild)
/p:IsInternalBuild=$(IsInternalBuild)
/p:RepositoryName=$(Build.Repository.Name)
/p:CommitSha=$(Build.SourceVersion)
/p:NugetPath=$(NuGetExeToolPath)
/p:AzdoTargetFeedPAT='$(dn-bot-dnceng-universal-packages-rw)'
/p:AzureStorageTargetFeedPAT='$(dotnetfeed-storage-access-key-1)'
/p:BARBuildId=$(BARBuildId)
/p:MaestroApiEndpoint='$(MaestroApiEndPoint)'
/p:BuildAssetRegistryToken='$(MaestroApiAccessToken)'
/p:ManifestsBasePath='$(Build.ArtifactStagingDirectory)/AssetManifests/'
/p:BlobBasePath='$(Build.ArtifactStagingDirectory)/BlobArtifacts/'
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts/'
/p:Configuration=Release
/p:PublishInstallersAndChecksums=${{ parameters.publishInstallersAndChecksums }}
/p:InstallersTargetStaticFeed=$(InstallersBlobFeedUrl)
/p:InstallersAzureAccountKey=$(dotnetcli-storage-key)
/p:ChecksumsTargetStaticFeed=$(ChecksumsBlobFeedUrl)
/p:ChecksumsAzureAccountKey=$(dotnetclichecksums-storage-key)
/p:PublishToAzureDevOpsNuGetFeeds=true
/p:AzureDevOpsStaticShippingFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
/p:AzureDevOpsStaticShippingFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticTransportFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
/p:AzureDevOpsStaticTransportFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
/p:AzureDevOpsStaticSymbolsFeed='https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools-symbols/nuget/v3/index.json'
/p:AzureDevOpsStaticSymbolsFeedKey='$(dn-bot-dnceng-artifact-feeds-rw)'
${{ parameters.artifactsPublishingAdditionalParameters }}
- template: ../../steps/promote-build.yml
parameters:
ChannelId: ${{ variables.PublicValidationRelease_30_Channel_Id }}
@@ -1,9 +1,7 @@
variables:
- group: AzureDevOps-Artifact-Feeds-Pats
- group: DotNet-Blob-Feed
- group: Publish-Build-Assets
- group: DotNet-DotNetCli-Storage
- group: DotNet-MSRC-Storage
- group: Publish-Build-Assets
# .NET Core 3.1 Dev
- name: PublicDevRelease_31_Channel_Id
@@ -14,21 +12,13 @@ variables:
value: 131
# .NET Tools - Validation
- name: NetCore_Tools_Validation_Channel_Id
- name: PublicValidationRelease_30_Channel_Id
value: 9
# .NET Tools - Latest
- name: NetCore_Tools_Latest_Channel_Id
value: 2
# .NET 3 Tools - Validation
- name: NETCore_3_Tools_Validation_Channel_Id
value: 390
# .NET 3 Tools - Latest
- name: NetCore_3_Tools_Channel_Id
value: 344
# .NET Core 3.0 Internal Servicing
- name: InternalServicing_30_Channel_Id
value: 184
@@ -41,14 +31,6 @@ variables:
- name: PublicRelease_31_Channel_Id
value: 129
# General Testing
- name: GeneralTesting_Channel_Id
value: 529
# .NET Core 3.1 Blazor Features
- name: NetCore_31_Blazor_Features_Channel_Id
value: 531
# Whether the build is internal or not
- name: IsInternalBuild
value: ${{ and(ne(variables['System.TeamProject'], 'public'), contains(variables['Build.SourceBranch'], 'internal')) }}
+15 -141
View File
@@ -8,7 +8,6 @@ parameters:
enable: false
continueOnError: false
params: ''
artifactNames: ''
# These parameters let the user customize the call to sdk-task.ps1 for publishing
# symbols & general artifacts as well as for signing validation
@@ -51,6 +50,7 @@ stages:
displayName: Signing Validation
variables:
- template: common-variables.yml
- group: AzureDevOps-Artifact-Feeds-Pats
pool:
vmImage: 'windows-2019'
steps:
@@ -64,6 +64,7 @@ stages:
# Since sdk-task.ps1 tries to restore packages we need to do this authentication here
# otherwise it'll complain about accessing a private feed.
- task: NuGetAuthenticate@0
condition: eq(variables['IsInternalBuild'], 'true')
displayName: 'Authenticate to AzDO Feeds'
- task: PowerShell@2
@@ -79,13 +80,9 @@ stages:
arguments: -task SigningValidation -restore -msbuildEngine dotnet
/p:PackageBasePath='$(Build.ArtifactStagingDirectory)/PackageArtifacts'
/p:SignCheckExclusionsFile='$(Build.SourcesDirectory)/eng/SignCheckExclusionsFile.txt'
/p:Configuration=Release
${{ parameters.signingValidationAdditionalParameters }}
- template: ../steps/publish-logs.yml
parameters:
StageLabel: 'Validation'
JobLabel: 'Signing'
- ${{ if eq(parameters.enableSourceLinkValidation, 'true') }}:
- job:
displayName: SourceLink Validation
@@ -116,173 +113,50 @@ stages:
parameters:
additionalParameters: ${{ parameters.SDLValidationParameters.params }}
continueOnError: ${{ parameters.SDLValidationParameters.continueOnError }}
artifactNames: ${{ parameters.SDLValidationParameters.artifactNames }}
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\netcore-dev-5.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Dev5_Publish'
channelName: '.NET Core 5 Dev'
channelId: 131
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5-transport/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet5-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\netcore-dev-31.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Dev31_Publish'
channelName: '.NET Core 3.1 Dev'
channelId: 128
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-transport/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\netcore-tools-latest.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Tools_Latest_Publish'
channelName: '.NET Tools - Latest'
channelId: 2
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\public-validation-release.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
- template: \eng\common\templates\post-build\channels\netcore-release-30.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'PVR_Publish'
channelName: '.NET Tools - Validation'
channelId: 9
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\netcore-release-31.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_3_Tools_Validation_Publish'
channelName: '.NET 3 Tools - Validation'
channelId: 390
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
- template: \eng\common\templates\post-build\channels\netcore-internal-30.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_3_Tools_Publish'
channelName: '.NET 3 Tools'
channelId: 344
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-eng-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Release30_Publish'
channelName: '.NET Core 3.0 Release'
channelId: 19
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3-transport/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Release31_Publish'
channelName: '.NET Core 3.1 Release'
channelId: 129
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-transport/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_Blazor31_Features_Publish'
channelName: '.NET Core 3.1 Blazor Features'
channelId: 531
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-blazor/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-blazor/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet3.1-blazor-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-internal-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NetCore_30_Internal_Servicing_Publishing'
channelName: '.NET Core 3.0 Internal Servicing'
channelId: 184
transportFeed: 'https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-transport/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/_packaging/dotnet3-internal-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'General_Testing_Publish'
channelName: 'General Testing'
channelId: 529
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/general-testing/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/general-testing/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/general-testing-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NETCore_Tooling_Dev_Publishing'
channelName: '.NET Core Tooling Dev'
channelId: 548
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools-symbols/nuget/v3/index.json'
- template: \eng\common\templates\post-build\channels\generic-public-channel.yml
parameters:
artifactsPublishingAdditionalParameters: ${{ parameters.artifactsPublishingAdditionalParameters }}
dependsOn: ${{ parameters.publishDependsOn }}
publishInstallersAndChecksums: ${{ parameters.publishInstallersAndChecksums }}
symbolPublishingAdditionalParameters: ${{ parameters.symbolPublishingAdditionalParameters }}
stageName: 'NETCore_Tooling_Release_Publishing'
channelName: '.NET Core Tooling Release'
channelId: 549
transportFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
shippingFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools/nuget/v3/index.json'
symbolsFeed: 'https://pkgs.dev.azure.com/dnceng/public/_packaging/dotnet-tools-symbols/nuget/v3/index.json'
@@ -4,8 +4,6 @@ jobs:
pool:
vmImage: 'windows-2019'
steps:
- checkout: none
- task: DownloadBuildArtifacts@0
displayName: Download Release Configs
inputs:
@@ -16,25 +14,5 @@ jobs:
name: setReleaseVars
displayName: Set Release Configs Vars
inputs:
targetType: inline
script: |
try {
$Content = Get-Content $(Build.StagingDirectory)/ReleaseConfigs/ReleaseConfigs.txt
$BarId = $Content | Select -Index 0
$Channels = ""
$Content | Select -Index 1 | ForEach-Object { $Channels += "$_ ," }
$IsStableBuild = $Content | Select -Index 2
Write-Host "##vso[task.setvariable variable=BARBuildId;isOutput=true]$BarId"
Write-Host "##vso[task.setvariable variable=InitialChannels;isOutput=true]$Channels"
Write-Host "##vso[task.setvariable variable=IsStableBuild;isOutput=true]$IsStableBuild"
}
catch {
Write-Host $_
Write-Host $_.Exception
Write-Host $_.ScriptStackTrace
exit 1
}
filePath: $(Build.SourcesDirectory)/eng/common/post-build/setup-maestro-vars.ps1
arguments: -ReleaseConfigsPath '$(Build.StagingDirectory)/ReleaseConfigs/ReleaseConfigs.txt'
@@ -1,23 +0,0 @@
parameters:
StageLabel: ''
JobLabel: ''
steps:
- task: Powershell@2
displayName: Prepare Binlogs to Upload
inputs:
targetType: inline
script: |
New-Item -ItemType Directory $(Build.SourcesDirectory)/PostBuildLogs/${{parameters.StageLabel}}/${{parameters.JobLabel}}/
Move-Item -Path $(Build.SourcesDirectory)/artifacts/log/Debug/* $(Build.SourcesDirectory)/PostBuildLogs/${{parameters.StageLabel}}/${{parameters.JobLabel}}/
continueOnError: true
condition: always()
- task: PublishBuildArtifacts@1
displayName: Publish Logs
inputs:
PathtoPublish: '$(Build.SourcesDirectory)/PostBuildLogs'
PublishLocation: Container
ArtifactName: PostBuilLogs
continueOnError: true
condition: always()
@@ -23,7 +23,6 @@ parameters:
EnableXUnitReporter: false # optional -- true enables XUnit result reporting to Mission Control
WaitForWorkItemCompletion: true # optional -- true will make the task wait until work items have been completed and fail the build if work items fail. False is "fire and forget."
IsExternal: false # [DEPRECATED] -- doesn't do anything, jobs are external if HelixAccessToken is empty and Creator is set
HelixBaseUri: 'https://helix.dot.net/' # optional -- sets the Helix API base URI (allows targeting int)
Creator: '' # optional -- if the build is external, use this to specify who is sending the job
DisplayNamePrefix: 'Run Tests' # optional -- rename the beginning of the displayName of the steps in AzDO
condition: succeeded() # optional -- condition for step to execute; defaults to succeeded()
@@ -56,7 +55,6 @@ steps:
DotNetCliVersion: ${{ parameters.DotNetCliVersion }}
EnableXUnitReporter: ${{ parameters.EnableXUnitReporter }}
WaitForWorkItemCompletion: ${{ parameters.WaitForWorkItemCompletion }}
HelixBaseUri: ${{ parameters.HelixBaseUri }}
Creator: ${{ parameters.Creator }}
SYSTEM_ACCESSTOKEN: $(System.AccessToken)
condition: and(${{ parameters.condition }}, eq(variables['Agent.Os'], 'Windows_NT'))
@@ -87,7 +85,6 @@ steps:
DotNetCliVersion: ${{ parameters.DotNetCliVersion }}
EnableXUnitReporter: ${{ parameters.EnableXUnitReporter }}
WaitForWorkItemCompletion: ${{ parameters.WaitForWorkItemCompletion }}
HelixBaseUri: ${{ parameters.HelixBaseUri }}
Creator: ${{ parameters.Creator }}
SYSTEM_ACCESSTOKEN: $(System.AccessToken)
condition: and(${{ parameters.condition }}, ne(variables['Agent.Os'], 'Windows_NT'))
+6 -43
View File
@@ -49,8 +49,6 @@
# An array of names of processes to stop on script exit if prepareMachine is true.
$processesToStopOnExit = if (Test-Path variable:processesToStopOnExit) { $processesToStopOnExit } else { @("msbuild", "dotnet", "vbcscompiler") }
$disableConfigureToolsetImport = if (Test-Path variable:disableConfigureToolsetImport) { $disableConfigureToolsetImport } else { $null }
set-strictmode -version 2.0
$ErrorActionPreference = "Stop"
[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
@@ -177,14 +175,7 @@ function InstallDotNetSdk([string] $dotnetRoot, [string] $version, [string] $arc
InstallDotNet $dotnetRoot $version $architecture
}
function InstallDotNet([string] $dotnetRoot,
[string] $version,
[string] $architecture = "",
[string] $runtime = "",
[bool] $skipNonVersionedFiles = $false,
[string] $runtimeSourceFeed = "",
[string] $runtimeSourceFeedKey = "") {
function InstallDotNet([string] $dotnetRoot, [string] $version, [string] $architecture = "", [string] $runtime = "", [bool] $skipNonVersionedFiles = $false) {
$installScript = GetDotNetInstallScript $dotnetRoot
$installParameters = @{
Version = $version
@@ -195,29 +186,10 @@ function InstallDotNet([string] $dotnetRoot,
if ($runtime) { $installParameters.Runtime = $runtime }
if ($skipNonVersionedFiles) { $installParameters.SkipNonVersionedFiles = $skipNonVersionedFiles }
try {
& $installScript @installParameters
}
catch {
Write-PipelineTelemetryError -Category "InitializeToolset" -Message "Failed to install dotnet runtime '$runtime' from public location."
# Only the runtime can be installed from a custom [private] location.
if ($runtime -and ($runtimeSourceFeed -or $runtimeSourceFeedKey)) {
if ($runtimeSourceFeed) { $installParameters.AzureFeed = $runtimeSourceFeed }
if ($runtimeSourceFeedKey) {
$decodedBytes = [System.Convert]::FromBase64String($runtimeSourceFeedKey)
$decodedString = [System.Text.Encoding]::UTF8.GetString($decodedBytes)
$installParameters.FeedCredential = $decodedString
}
try {
& $installScript @installParameters
}
catch {
Write-PipelineTelemetryError -Category "InitializeToolset" -Message "Failed to install dotnet runtime '$runtime' from custom location '$runtimeSourceFeed'."
}
}
& $installScript @installParameters
if ($lastExitCode -ne 0) {
Write-PipelineTelemetryError -Category "InitializeToolset" -Message "Failed to install dotnet cli (exit code '$lastExitCode')."
ExitWithExitCode $lastExitCode
}
}
@@ -446,7 +418,7 @@ function GetSdkTaskProject([string]$taskName) {
}
function InitializeNativeTools() {
if (-Not (Test-Path variable:DisableNativeToolsetInstalls) -And (Get-Member -InputObject $GlobalJson -Name "native-tools")) {
if (Get-Member -InputObject $GlobalJson -Name "native-tools") {
$nativeArgs= @{}
if ($ci) {
$nativeArgs = @{
@@ -627,12 +599,3 @@ Write-PipelineSetVariable -Name 'Artifacts.Toolset' -Value $ToolsetDir
Write-PipelineSetVariable -Name 'Artifacts.Log' -Value $LogDir
Write-PipelineSetVariable -Name 'TEMP' -Value $TempDir
Write-PipelineSetVariable -Name 'TMP' -Value $TempDir
# Import custom tools configuration, if present in the repo.
# Note: Import in global scope so that the script set top-level variables without qualification.
if (!$disableConfigureToolsetImport) {
$configureToolsetScript = Join-Path $EngRoot "configure-toolset.ps1"
if (Test-Path $configureToolsetScript) {
. $configureToolsetScript
}
}
+3 -42
View File
@@ -4,7 +4,6 @@
# CI mode - set to true on CI server for PR validation build or official build.
ci=${ci:-false}
disable_configure_toolset_import=${disable_configure_toolset_import:-}
# Set to true to use the pipelines logger which will enable Azure logging output.
# https://github.com/Microsoft/azure-pipelines-tasks/blob/master/docs/authoring/commands.md
@@ -192,28 +191,8 @@ function InstallDotNet {
fi
bash "$install_script" --version $version --install-dir "$root" $archArg $runtimeArg $skipNonVersionedFilesArg || {
local exit_code=$?
Write-PipelineTelemetryError -category 'InitializeToolset' "Failed to install dotnet SDK from public location (exit code '$exit_code')."
if [[ -n "$runtimeArg" ]]; then
local runtimeSourceFeed=''
if [[ -n "${6:-}" ]]; then
runtimeSourceFeed="--azure-feed $6"
fi
local runtimeSourceFeedKey=''
if [[ -n "${7:-}" ]]; then
decodedFeedKey=`echo $7 | base64 --decode`
runtimeSourceFeedKey="--feed-credential $decodedFeedKey"
fi
if [[ -n "$runtimeSourceFeed" || -n "$runtimeSourceFeedKey" ]]; then
bash "$install_script" --version $version --install-dir "$root" $archArg $runtimeArg $skipNonVersionedFilesArg $runtimeSourceFeed $runtimeSourceFeedKey || {
local exit_code=$?
Write-PipelineTelemetryError -category 'InitializeToolset' "Failed to install dotnet SDK from custom location '$runtimeSourceFeed' (exit code '$exit_code')."
ExitWithExitCode $exit_code
}
fi
fi
Write-PipelineTelemetryError -category 'InitializeToolset' "Failed to install dotnet SDK (exit code '$exit_code')."
ExitWithExitCode $exit_code
}
}
@@ -273,9 +252,6 @@ function GetNuGetPackageCachePath {
}
function InitializeNativeTools() {
if [[ -n "${DisableNativeToolsetInstalls:-}" ]]; then
return
fi
if grep -Fq "native-tools" $global_json_file
then
local nativeArgs=""
@@ -356,7 +332,7 @@ function MSBuild {
# Work around issues with Azure Artifacts credential provider
# https://github.com/dotnet/arcade/issues/3932
if [[ "$ci" == true ]]; then
"$_InitializeBuildTool" nuget locals http-cache -c
dotnet nuget locals http-cache -c
export NUGET_PLUGIN_HANDSHAKE_TIMEOUT_IN_SECONDS=20
export NUGET_PLUGIN_REQUEST_TIMEOUT_IN_SECONDS=20
@@ -435,18 +411,3 @@ Write-PipelineSetVariable -name "Artifacts.Toolset" -value "$toolset_dir"
Write-PipelineSetVariable -name "Artifacts.Log" -value "$log_dir"
Write-PipelineSetVariable -name "Temp" -value "$temp_dir"
Write-PipelineSetVariable -name "TMP" -value "$temp_dir"
# Import custom tools configuration, if present in the repo.
if [[ -z "$disable_configure_toolset_import" ]]; then
configure_toolset_script="$eng_root/configure-toolset.sh"
if [[ -a "$configure_toolset_script" ]]; then
. "$configure_toolset_script"
fi
fi
# TODO: https://github.com/dotnet/arcade/issues/1468
# Temporary workaround to avoid breaking change.
# Remove once repos are updated.
if [[ -n "${useInstalledDotNetCli:-}" ]]; then
use_installed_dotnet_cli="$useInstalledDotNetCli"
fi
-1
Submodule external/bdwgc deleted from 6e8db07c8d.
+1 -1
Vendored Submodule
+1
Submodule external/llvm added at 29f36fd315.
Submodule external/llvm-project deleted from 0a3f49c40d.
+3 -3
View File
@@ -1,9 +1,9 @@
{
"tools": {
"dotnet": "5.0.100-alpha1-014854"
"dotnet": "5.0.100-alpha1-013968"
},
"msbuild-sdks": {
"Microsoft.DotNet.Arcade.Sdk": "5.0.0-beta.19567.2",
"Microsoft.DotNet.Helix.Sdk": "5.0.0-beta.19567.2"
"Microsoft.DotNet.Arcade.Sdk": "5.0.0-beta.19473.5",
"Microsoft.DotNet.Helix.Sdk": "5.0.0-beta.19473.5"
}
}
+4
View File
@@ -0,0 +1,4 @@
ltconfig crlf=input
install-sh crlf=input
/BCC_MAKEFILE -crlf
/digimars.mak -crlf
+25
View File
@@ -0,0 +1,25 @@
/aclocal.m4
/config.cache
/config.guess
/config.h
/config.h.in
/config.log
/config.status
/config.sub
/configure
/libtool
/ltmain.sh
/ltconfig
/Makefile
/Makefile.in
/stamp-h
/stamp-h.in
/*.lo
/.deps
/.libs
/*.la
/*.o
/autom4te.cache
/libgc-mono.pc
/libgc-mono-*.tar.gz
dolt*
+623
View File
@@ -0,0 +1,623 @@
/******************************************************************
AmigaOS-spesific routines for GC.
This file is normally included from os_dep.c
******************************************************************/
#if !defined(GC_AMIGA_DEF) && !defined(GC_AMIGA_SB) && !defined(GC_AMIGA_DS) && !defined(GC_AMIGA_AM)
# include "gc_priv.h"
# include <stdio.h>
# include <signal.h>
# define GC_AMIGA_DEF
# define GC_AMIGA_SB
# define GC_AMIGA_DS
# define GC_AMIGA_AM
#endif
#ifdef GC_AMIGA_DEF
# ifndef __GNUC__
# include <exec/exec.h>
# endif
# include <proto/exec.h>
# include <proto/dos.h>
# include <dos/dosextens.h>
# include <workbench/startup.h>
#endif
#ifdef GC_AMIGA_SB
/******************************************************************
Find the base of the stack.
******************************************************************/
ptr_t GC_get_stack_base()
{
struct Process *proc = (struct Process*)SysBase->ThisTask;
/* Reference: Amiga Guru Book Pages: 42,567,574 */
if (proc->pr_Task.tc_Node.ln_Type==NT_PROCESS
&& proc->pr_CLI != NULL) {
/* first ULONG is StackSize */
/*longPtr = proc->pr_ReturnAddr;
size = longPtr[0];*/
return (char *)proc->pr_ReturnAddr + sizeof(ULONG);
} else {
return (char *)proc->pr_Task.tc_SPUpper;
}
}
#if 0 /* old version */
ptr_t GC_get_stack_base()
{
extern struct WBStartup *_WBenchMsg;
extern long __base;
extern long __stack;
struct Task *task;
struct Process *proc;
struct CommandLineInterface *cli;
long size;
if ((task = FindTask(0)) == 0) {
GC_err_puts("Cannot find own task structure\n");
ABORT("task missing");
}
proc = (struct Process *)task;
cli = BADDR(proc->pr_CLI);
if (_WBenchMsg != 0 || cli == 0) {
size = (char *)task->tc_SPUpper - (char *)task->tc_SPLower;
} else {
size = cli->cli_DefaultStack * 4;
}
return (ptr_t)(__base + GC_max(size, __stack));
}
#endif
#endif
#ifdef GC_AMIGA_DS
/******************************************************************
Register data segments.
******************************************************************/
void GC_register_data_segments()
{
struct Process *proc;
struct CommandLineInterface *cli;
BPTR myseglist;
ULONG *data;
int num;
# ifdef __GNUC__
ULONG dataSegSize;
GC_bool found_segment = FALSE;
extern char __data_size[];
dataSegSize=__data_size+8;
/* Can`t find the Location of __data_size, because
it`s possible that is it, inside the segment. */
# endif
proc= (struct Process*)SysBase->ThisTask;
/* Reference: Amiga Guru Book Pages: 538ff,565,573
and XOper.asm */
if (proc->pr_Task.tc_Node.ln_Type==NT_PROCESS) {
if (proc->pr_CLI == NULL) {
myseglist = proc->pr_SegList;
} else {
/* ProcLoaded 'Loaded as a command: '*/
cli = BADDR(proc->pr_CLI);
myseglist = cli->cli_Module;
}
} else {
ABORT("Not a Process.");
}
if (myseglist == NULL) {
ABORT("Arrrgh.. can't find segments, aborting");
}
/* xoper hunks Shell Process */
num=0;
for (data = (ULONG *)BADDR(myseglist); data != NULL;
data = (ULONG *)BADDR(data[0])) {
if (((ULONG) GC_register_data_segments < (ULONG) &data[1]) ||
((ULONG) GC_register_data_segments > (ULONG) &data[1] + data[-1])) {
# ifdef __GNUC__
if (dataSegSize == data[-1]) {
found_segment = TRUE;
}
# endif
GC_add_roots_inner((char *)&data[1],
((char *)&data[1]) + data[-1], FALSE);
}
++num;
} /* for */
# ifdef __GNUC__
if (!found_segment) {
ABORT("Can`t find correct Segments.\nSolution: Use an newer version of ixemul.library");
}
# endif
}
#if 0 /* old version */
void GC_register_data_segments()
{
extern struct WBStartup *_WBenchMsg;
struct Process *proc;
struct CommandLineInterface *cli;
BPTR myseglist;
ULONG *data;
if ( _WBenchMsg != 0 ) {
if ((myseglist = _WBenchMsg->sm_Segment) == 0) {
GC_err_puts("No seglist from workbench\n");
return;
}
} else {
if ((proc = (struct Process *)FindTask(0)) == 0) {
GC_err_puts("Cannot find process structure\n");
return;
}
if ((cli = BADDR(proc->pr_CLI)) == 0) {
GC_err_puts("No CLI\n");
return;
}
if ((myseglist = cli->cli_Module) == 0) {
GC_err_puts("No seglist from CLI\n");
return;
}
}
for (data = (ULONG *)BADDR(myseglist); data != 0;
data = (ULONG *)BADDR(data[0])) {
# ifdef AMIGA_SKIP_SEG
if (((ULONG) GC_register_data_segments < (ULONG) &data[1]) ||
((ULONG) GC_register_data_segments > (ULONG) &data[1] + data[-1])) {
# else
{
# endif /* AMIGA_SKIP_SEG */
GC_add_roots_inner((char *)&data[1],
((char *)&data[1]) + data[-1], FALSE);
}
}
}
#endif /* old version */
#endif
#ifdef GC_AMIGA_AM
#ifndef GC_AMIGA_FASTALLOC
void *GC_amiga_allocwrapper(size_t size,void *(*AllocFunction)(size_t size2)){
return (*AllocFunction)(size);
}
void *(*GC_amiga_allocwrapper_do)(size_t size,void *(*AllocFunction)(size_t size2))
=GC_amiga_allocwrapper;
#else
void *GC_amiga_allocwrapper_firsttime(size_t size,void *(*AllocFunction)(size_t size2));
void *(*GC_amiga_allocwrapper_do)(size_t size,void *(*AllocFunction)(size_t size2))
=GC_amiga_allocwrapper_firsttime;
/******************************************************************
Amiga-spesific routines to obtain memory, and force GC to give
back fast-mem whenever possible.
These hacks makes gc-programs go many times faster when
the amiga is low on memory, and are therefore strictly necesarry.
-Kjetil S. Matheussen, 2000.
******************************************************************/
/* List-header for all allocated memory. */
struct GC_Amiga_AllocedMemoryHeader{
ULONG size;
struct GC_Amiga_AllocedMemoryHeader *next;
};
struct GC_Amiga_AllocedMemoryHeader *GC_AMIGAMEM=(struct GC_Amiga_AllocedMemoryHeader *)(int)~(NULL);
/* Type of memory. Once in the execution of a program, this might change to MEMF_ANY|MEMF_CLEAR */
ULONG GC_AMIGA_MEMF = MEMF_FAST | MEMF_CLEAR;
/* Prevents GC_amiga_get_mem from allocating memory if this one is TRUE. */
#ifndef GC_AMIGA_ONLYFAST
BOOL GC_amiga_dontalloc=FALSE;
#endif
#ifdef GC_AMIGA_PRINTSTATS
int succ=0,succ2=0;
int nsucc=0,nsucc2=0;
int nullretries=0;
int numcollects=0;
int chipa=0;
int allochip=0;
int allocfast=0;
int cur0=0;
int cur1=0;
int cur10=0;
int cur50=0;
int cur150=0;
int cur151=0;
int ncur0=0;
int ncur1=0;
int ncur10=0;
int ncur50=0;
int ncur150=0;
int ncur151=0;
#endif
/* Free everything at program-end. */
void GC_amiga_free_all_mem(void){
struct GC_Amiga_AllocedMemoryHeader *gc_am=(struct GC_Amiga_AllocedMemoryHeader *)(~(int)(GC_AMIGAMEM));
struct GC_Amiga_AllocedMemoryHeader *temp;
#ifdef GC_AMIGA_PRINTSTATS
printf("\n\n"
"%d bytes of chip-mem, and %d bytes of fast-mem where allocated from the OS.\n",
allochip,allocfast
);
printf(
"%d bytes of chip-mem were returned from the GC_AMIGA_FASTALLOC supported allocating functions.\n",
chipa
);
printf("\n");
printf("GC_gcollect was called %d times to avoid returning NULL or start allocating with the MEMF_ANY flag.\n",numcollects);
printf("%d of them was a success. (the others had to use allocation from the OS.)\n",nullretries);
printf("\n");
printf("Succeded forcing %d gc-allocations (%d bytes) of chip-mem to be fast-mem.\n",succ,succ2);
printf("Failed forcing %d gc-allocations (%d bytes) of chip-mem to be fast-mem.\n",nsucc,nsucc2);
printf("\n");
printf(
"Number of retries before succeding a chip->fast force:\n"
"0: %d, 1: %d, 2-9: %d, 10-49: %d, 50-149: %d, >150: %d\n",
cur0,cur1,cur10,cur50,cur150,cur151
);
printf(
"Number of retries before giving up a chip->fast force:\n"
"0: %d, 1: %d, 2-9: %d, 10-49: %d, 50-149: %d, >150: %d\n",
ncur0,ncur1,ncur10,ncur50,ncur150,ncur151
);
#endif
while(gc_am!=NULL){
temp=gc_am->next;
FreeMem(gc_am,gc_am->size);
gc_am=(struct GC_Amiga_AllocedMemoryHeader *)(~(int)(temp));
}
}
#ifndef GC_AMIGA_ONLYFAST
/* All memory with address lower than this one is chip-mem. */
char *chipmax;
/*
* Allways set to the last size of memory tried to be allocated.
* Needed to ensure allocation when the size is bigger than 100000.
*
*/
size_t latestsize;
#endif
/*
* The actual function that is called with the GET_MEM macro.
*
*/
void *GC_amiga_get_mem(size_t size){
struct GC_Amiga_AllocedMemoryHeader *gc_am;
#ifndef GC_AMIGA_ONLYFAST
if(GC_amiga_dontalloc==TRUE){
// printf("rejected, size: %d, latestsize: %d\n",size,latestsize);
return NULL;
}
// We really don't want to use chip-mem, but if we must, then as little as possible.
if(GC_AMIGA_MEMF==(MEMF_ANY|MEMF_CLEAR) && size>100000 && latestsize<50000) return NULL;
#endif
gc_am=AllocMem((ULONG)(size + sizeof(struct GC_Amiga_AllocedMemoryHeader)),GC_AMIGA_MEMF);
if(gc_am==NULL) return NULL;
gc_am->next=GC_AMIGAMEM;
gc_am->size=size + sizeof(struct GC_Amiga_AllocedMemoryHeader);
GC_AMIGAMEM=(struct GC_Amiga_AllocedMemoryHeader *)(~(int)(gc_am));
// printf("Allocated %d (%d) bytes at address: %x. Latest: %d\n",size,tot,gc_am,latestsize);
#ifdef GC_AMIGA_PRINTSTATS
if((char *)gc_am<chipmax){
allochip+=size;
}else{
allocfast+=size;
}
#endif
return gc_am+1;
}
#ifndef GC_AMIGA_ONLYFAST
/* Tries very hard to force GC to find fast-mem to return. Done recursively
* to hold the rejected memory-pointers reachable from the collector in an
* easy way.
*
*/
#ifdef GC_AMIGA_RETRY
void *GC_amiga_rec_alloc(size_t size,void *(*AllocFunction)(size_t size2),const int rec){
void *ret;
ret=(*AllocFunction)(size);
#ifdef GC_AMIGA_PRINTSTATS
if((char *)ret>chipmax || ret==NULL){
if(ret==NULL){
nsucc++;
nsucc2+=size;
if(rec==0) ncur0++;
if(rec==1) ncur1++;
if(rec>1 && rec<10) ncur10++;
if(rec>=10 && rec<50) ncur50++;
if(rec>=50 && rec<150) ncur150++;
if(rec>=150) ncur151++;
}else{
succ++;
succ2+=size;
if(rec==0) cur0++;
if(rec==1) cur1++;
if(rec>1 && rec<10) cur10++;
if(rec>=10 && rec<50) cur50++;
if(rec>=50 && rec<150) cur150++;
if(rec>=150) cur151++;
}
}
#endif
if (((char *)ret)<=chipmax && ret!=NULL && (rec<(size>500000?9:size/5000))){
ret=GC_amiga_rec_alloc(size,AllocFunction,rec+1);
// GC_free(ret2);
}
return ret;
}
#endif
/* The allocating-functions defined inside the amiga-blocks in gc.h is called
* via these functions.
*/
void *GC_amiga_allocwrapper_any(size_t size,void *(*AllocFunction)(size_t size2)){
void *ret,*ret2;
GC_amiga_dontalloc=TRUE; // Pretty tough thing to do, but its indeed necesarry.
latestsize=size;
ret=(*AllocFunction)(size);
if(((char *)ret) <= chipmax){
if(ret==NULL){
//Give GC access to allocate memory.
#ifdef GC_AMIGA_GC
if(!GC_dont_gc){
GC_gcollect();
#ifdef GC_AMIGA_PRINTSTATS
numcollects++;
#endif
ret=(*AllocFunction)(size);
}
#endif
if(ret==NULL){
GC_amiga_dontalloc=FALSE;
ret=(*AllocFunction)(size);
if(ret==NULL){
WARN("Out of Memory! Returning NIL!\n", 0);
}
}
#ifdef GC_AMIGA_PRINTSTATS
else{
nullretries++;
}
if(ret!=NULL && (char *)ret<=chipmax) chipa+=size;
#endif
}
#ifdef GC_AMIGA_RETRY
else{
/* We got chip-mem. Better try again and again and again etc., we might get fast-mem sooner or later... */
/* Using gctest to check the effectiviness of doing this, does seldom give a very good result. */
/* However, real programs doesn't normally rapidly allocate and deallocate. */
// printf("trying to force... %d bytes... ",size);
if(
AllocFunction!=GC_malloc_uncollectable
#ifdef ATOMIC_UNCOLLECTABLE
&& AllocFunction!=GC_malloc_atomic_uncollectable
#endif
){
ret2=GC_amiga_rec_alloc(size,AllocFunction,0);
}else{
ret2=(*AllocFunction)(size);
#ifdef GC_AMIGA_PRINTSTATS
if((char *)ret2<chipmax || ret2==NULL){
nsucc++;
nsucc2+=size;
ncur0++;
}else{
succ++;
succ2+=size;
cur0++;
}
#endif
}
if(((char *)ret2)>chipmax){
// printf("Succeeded.\n");
GC_free(ret);
ret=ret2;
}else{
GC_free(ret2);
// printf("But did not succeed.\n");
}
}
#endif
}
GC_amiga_dontalloc=FALSE;
return ret;
}
void (*GC_amiga_toany)(void)=NULL;
void GC_amiga_set_toany(void (*func)(void)){
GC_amiga_toany=func;
}
#endif // !GC_AMIGA_ONLYFAST
void *GC_amiga_allocwrapper_fast(size_t size,void *(*AllocFunction)(size_t size2)){
void *ret;
ret=(*AllocFunction)(size);
if(ret==NULL){
// Enable chip-mem allocation.
// printf("ret==NULL\n");
#ifdef GC_AMIGA_GC
if(!GC_dont_gc){
GC_gcollect();
#ifdef GC_AMIGA_PRINTSTATS
numcollects++;
#endif
ret=(*AllocFunction)(size);
}
#endif
if(ret==NULL){
#ifndef GC_AMIGA_ONLYFAST
GC_AMIGA_MEMF=MEMF_ANY | MEMF_CLEAR;
if(GC_amiga_toany!=NULL) (*GC_amiga_toany)();
GC_amiga_allocwrapper_do=GC_amiga_allocwrapper_any;
return GC_amiga_allocwrapper_any(size,AllocFunction);
#endif
}
#ifdef GC_AMIGA_PRINTSTATS
else{
nullretries++;
}
#endif
}
return ret;
}
void *GC_amiga_allocwrapper_firsttime(size_t size,void *(*AllocFunction)(size_t size2)){
atexit(&GC_amiga_free_all_mem);
chipmax=(char *)SysBase->MaxLocMem; // For people still having SysBase in chip-mem, this might speed up a bit.
GC_amiga_allocwrapper_do=GC_amiga_allocwrapper_fast;
return GC_amiga_allocwrapper_fast(size,AllocFunction);
}
#endif //GC_AMIGA_FASTALLOC
/*
* The wrapped realloc function.
*
*/
void *GC_amiga_realloc(void *old_object,size_t new_size_in_bytes){
#ifndef GC_AMIGA_FASTALLOC
return GC_realloc(old_object,new_size_in_bytes);
#else
void *ret;
latestsize=new_size_in_bytes;
ret=GC_realloc(old_object,new_size_in_bytes);
if(ret==NULL && GC_AMIGA_MEMF==(MEMF_FAST | MEMF_CLEAR)){
/* Out of fast-mem. */
#ifdef GC_AMIGA_GC
if(!GC_dont_gc){
GC_gcollect();
#ifdef GC_AMIGA_PRINTSTATS
numcollects++;
#endif
ret=GC_realloc(old_object,new_size_in_bytes);
}
#endif
if(ret==NULL){
#ifndef GC_AMIGA_ONLYFAST
GC_AMIGA_MEMF=MEMF_ANY | MEMF_CLEAR;
if(GC_amiga_toany!=NULL) (*GC_amiga_toany)();
GC_amiga_allocwrapper_do=GC_amiga_allocwrapper_any;
ret=GC_realloc(old_object,new_size_in_bytes);
#endif
}
#ifdef GC_AMIGA_PRINTSTATS
else{
nullretries++;
}
#endif
}
if(ret==NULL){
WARN("Out of Memory! Returning NIL!\n", 0);
}
#ifdef GC_AMIGA_PRINTSTATS
if(((char *)ret)<chipmax && ret!=NULL){
chipa+=new_size_in_bytes;
}
#endif
return ret;
#endif
}
#endif //GC_AMIGA_AM
+88
View File
@@ -0,0 +1,88 @@
# Makefile for Borland C++ 5.5 on NT
# If you have the Borland assembler, remove "-DUSE_GENERIC"
#
bc= c:\Borland\BCC55
bcbin= $(bc)\bin
bclib= $(bc)\lib
bcinclude= $(bc)\include
gcinclude1 = $(bc)\gc6.2\include
gcinclude2 = $(bc)\gc6.2\cord
cc= $(bcbin)\bcc32
rc= $(bcbin)\brc32
lib= $(bcbin)\tlib
link= $(bcbin)\ilink32
cflags= -O2 -R -v- -vi -H -H=gc.csm -I$(bcinclude);$(gcinclude1);$(gcinclude2) -L$(bclib) \
-w-pro -w-aus -w-par -w-ccc -w-rch -a4 -D__STDC__=0
#defines= -DSILENT
defines= -DSILENT -DALL_INTERIOR_POINTERS -DUSE_GENERIC -DNO_GETENV -DJAVA_FINALIZATION -DGC_OPERATOR_NEW_ARRAY
.c.obj:
$(cc) @&&|
$(cdebug) $(cflags) $(cvars) $(defines) -o$* -c $*.c
|
.cpp.obj:
$(cc) @&&|
$(cdebug) $(cflags) $(cvars) $(defines) -o$* -c $*.cpp
|
.rc.res:
$(rc) -i$(bcinclude) -r -fo$* $*.rc
XXXOBJS= XXXalloc.obj XXXreclaim.obj XXXallchblk.obj XXXmisc.obj \
XXXmach_dep.obj XXXos_dep.obj XXXmark_rts.obj XXXheaders.obj XXXmark.obj \
XXXobj_map.obj XXXblacklst.obj XXXfinalize.obj XXXnew_hblk.obj \
XXXdbg_mlc.obj XXXmalloc.obj XXXstubborn.obj XXXdyn_load.obj \
XXXtypd_mlc.obj XXXptr_chck.obj XXXgc_cpp.obj XXXmallocx.obj
OBJS= $(XXXOBJS:XXX=)
all: gctest.exe cord\de.exe test_cpp.exe
$(OBJS) test.obj: include\private\gc_priv.h include\private\gc_hdrs.h include\gc.h include\private\gcconfig.h MAKEFILE
gc.lib: $(OBJS)
del gc.lib
$(lib) $* @&&|
$(XXXOBJS:XXX=+)
|
gctest.exe: tests\test.obj gc.lib
$(cc) @&&|
$(cflags) -W -e$* tests\test.obj gc.lib
|
cord\de.obj cord\de_win.obj: include\cord.h include\private\cord_pos.h cord\de_win.h \
cord\de_cmds.h
cord\de.exe: cord\cordbscs.obj cord\cordxtra.obj cord\de.obj cord\de_win.obj \
cord\de_win.res gc.lib
$(cc) @&&|
$(cflags) -W -e$* cord\cordbscs.obj cord\cordxtra.obj \
cord\de.obj cord\de_win.obj gc.lib
|
$(rc) cord\de_win.res cord\de.exe
gc_cpp.obj: include\gc_cpp.h include\gc.h
gc_cpp.cpp: gc_cpp.cc
copy gc_cpp.cc gc_cpp.cpp
test_cpp.cpp: tests\test_cpp.cc
copy tests\test_cpp.cc test_cpp.cpp
test_cpp.exe: test_cpp.obj include\gc_cpp.h include\gc.h gc.lib
$(cc) @&&|
$(cflags) -W -e$* test_cpp.obj gc.lib
|
scratch:
-del *.obj *.res *.exe *.csm cord\*.obj cord\*.res cord\*.exe cord\*.csm
clean:
del gc.lib
del *.obj
del tests\test.obj
+141
View File
@@ -0,0 +1,141 @@
#
# OS/2 specific Makefile for the EMX environment
#
# You need GNU Make 3.71, gcc 2.5.7, emx 0.8h and GNU fileutils 3.9
# or similar tools. C++ interface and de.exe weren't tested.
#
# Rename this file "Makefile".
#
# Primary targets:
# gc.a - builds basic library
# c++ - adds C++ interface to library and include directory
# cords - adds cords (heavyweight strings) to library and include directory
# test - prints porting information, then builds basic version of gc.a, and runs
# some tests of collector and cords. Does not add cords or c++ interface to gc.a
# cord/de.exe - builds dumb editor based on cords.
CC= gcc
CXX=g++
# Needed only for "make c++", which adds the c++ interface
CFLAGS= -O -DALL_INTERIOR_POINTERS -DSILENT
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
# -DSILENT disables statistics printing, and improves performance.
# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
# altered stubborn objects, at substantial performance cost.
# -DFIND_LEAK causes the collector to assume that all inaccessible
# objects should have been explicitly deallocated, and reports exceptions
# -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
# (Clients should also define SOLARIS_THREADS and then include
# gc.h before performing thr_ or GC_ operations.)
# -DALL_INTERIOR_POINTERS allows all pointers to the interior
# of objects to be recognized. (See gc_private.h for consequences.)
# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
# usually causing it to use less space in such situations.
# Incremental collection no longer works in this case.
# -DDONT_ADD_BYTE_AT_END is meaningful only with
# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
# causes all objects to be padded so that pointers just past the end of
# an object can be recognized. This can be expensive. (The padding
# is normally more than one byte due to alignment constraints.)
# -DDONT_ADD_BYTE_AT_END disables the padding.
AR= ar
RANLIB= ar s
# Redefining srcdir allows object code for the nonPCR version of the collector
# to be generated in different directories
srcdir = .
VPATH = $(srcdir)
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dyn_load.o dbg_mlc.o malloc.o stubborn.o checksums.o typd_mlc.o ptr_chck.o mallocx.o
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
$(srcdir)/cord/cord_pos.h
# Libraries needed for curses applications. Only needed for de.
CURSES= -lcurses -ltermlib
# The following is irrelevant on most systems. But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= bash
SPECIALCFLAGS =
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
all: gc.a gctest.exe
$(OBJS) test.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \
$(srcdir)/gcconfig.h $(srcdir)/gc_typed.h
# The dependency on Makefile is needed. Changing
# options such as -DSILENT affects the size of GC_arrays,
# invalidating all .o files that rely on gc_priv.h
mark.o typd_mlc.o finalize.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
gc.a: $(OBJS)
$(AR) ru gc.a $(OBJS)
$(RANLIB) gc.a
cords: $(CORD_OBJS) cord/cordtest.exe
$(AR) ru gc.a $(CORD_OBJS)
$(RANLIB) gc.a
cp $(srcdir)/cord/cord.h include/cord.h
cp $(srcdir)/cord/ec.h include/ec.h
cp $(srcdir)/cord/cord_pos.h include/cord_pos.h
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h
$(CXX) -c -O $(srcdir)/gc_cpp.cc
c++: gc_cpp.o $(srcdir)/gc_cpp.h
$(AR) ru gc.a gc_cpp.o
$(RANLIB) gc.a
cp $(srcdir)/gc_cpp.h include/gc_cpp.h
mach_dep.o: $(srcdir)/mach_dep.c
$(CC) -o mach_dep.o -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
mark_rts.o: $(srcdir)/mark_rts.c
$(CC) -o mark_rts.o -c $(CFLAGS) $(srcdir)/mark_rts.c
cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c -o cord/cordbscs.o
cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c -o cord/cordxtra.o
cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c -o cord/cordprnt.o
cord/cordtest.exe: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
$(CC) $(CFLAGS) -o cord/cordtest.exe $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
cord/de.exe: $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a
$(CC) $(CFLAGS) -o cord/de.exe $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a $(CURSES)
clean:
rm -f gc.a tests/test.o gctest.exe output-local output-diff $(OBJS) \
setjmp_test mon.out gmon.out a.out core \
$(CORD_OBJS) cord/cordtest.exe cord/de.exe
-rm -f *~
gctest.exe: tests/test.o gc.a
$(CC) $(CFLAGS) -o gctest.exe tests/test.o gc.a
# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken. Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test.exe: $(srcdir)/setjmp_t.c $(srcdir)/gc.h
$(CC) $(CFLAGS) -o setjmp_test.exe $(srcdir)/setjmp_t.c
test: setjmp_test.exe gctest.exe
./setjmp_test
./gctest
make cord/cordtest.exe
cord/cordtest
+154
View File
@@ -0,0 +1,154 @@
/*
MacOS.c
Some routines for the Macintosh OS port of the Hans-J. Boehm, Alan J. Demers
garbage collector.
<Revision History>
11/22/94 pcb StripAddress the temporary memory handle for 24-bit mode.
11/30/94 pcb Tracking all memory usage so we can deallocate it all at once.
02/10/96 pcb Added routine to perform a final collection when
unloading shared library.
by Patrick C. Beard.
*/
/* Boehm, February 15, 1996 2:55 pm PST */
#include <Resources.h>
#include <Memory.h>
#include <LowMem.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "gc.h"
#include "gc_priv.h"
// use 'CODE' resource 0 to get exact location of the beginning of global space.
typedef struct {
unsigned long aboveA5;
unsigned long belowA5;
unsigned long JTSize;
unsigned long JTOffset;
} *CodeZeroPtr, **CodeZeroHandle;
void* GC_MacGetDataStart()
{
CodeZeroHandle code0 = (CodeZeroHandle)GetResource('CODE', 0);
if (code0) {
long belowA5Size = (**code0).belowA5;
ReleaseResource((Handle)code0);
return (LMGetCurrentA5() - belowA5Size);
}
fprintf(stderr, "Couldn't load the jump table.");
exit(-1);
return 0;
}
/* track the use of temporary memory so it can be freed all at once. */
typedef struct TemporaryMemoryBlock TemporaryMemoryBlock, **TemporaryMemoryHandle;
struct TemporaryMemoryBlock {
TemporaryMemoryHandle nextBlock;
char data[];
};
static TemporaryMemoryHandle theTemporaryMemory = NULL;
static Boolean firstTime = true;
void GC_MacFreeTemporaryMemory(void);
Ptr GC_MacTemporaryNewPtr(size_t size, Boolean clearMemory)
{
static Boolean firstTime = true;
OSErr result;
TemporaryMemoryHandle tempMemBlock;
Ptr tempPtr = nil;
tempMemBlock = (TemporaryMemoryHandle)TempNewHandle(size + sizeof(TemporaryMemoryBlock), &result);
if (tempMemBlock && result == noErr) {
HLockHi((Handle)tempMemBlock);
tempPtr = (**tempMemBlock).data;
if (clearMemory) memset(tempPtr, 0, size);
tempPtr = StripAddress(tempPtr);
// keep track of the allocated blocks.
(**tempMemBlock).nextBlock = theTemporaryMemory;
theTemporaryMemory = tempMemBlock;
}
# if !defined(SHARED_LIBRARY_BUILD)
// install an exit routine to clean up the memory used at the end.
if (firstTime) {
atexit(&GC_MacFreeTemporaryMemory);
firstTime = false;
}
# endif
return tempPtr;
}
extern word GC_fo_entries;
static void perform_final_collection()
{
unsigned i;
word last_fo_entries = 0;
/* adjust the stack bottom, because CFM calls us from another stack
location. */
GC_stackbottom = (ptr_t)&i;
/* try to collect and finalize everything in sight */
for (i = 0; i < 2 || GC_fo_entries < last_fo_entries; i++) {
last_fo_entries = GC_fo_entries;
GC_gcollect();
}
}
void GC_MacFreeTemporaryMemory()
{
# if defined(SHARED_LIBRARY_BUILD)
/* if possible, collect all memory, and invoke all finalizers. */
perform_final_collection();
# endif
if (theTemporaryMemory != NULL) {
long totalMemoryUsed = 0;
TemporaryMemoryHandle tempMemBlock = theTemporaryMemory;
while (tempMemBlock != NULL) {
TemporaryMemoryHandle nextBlock = (**tempMemBlock).nextBlock;
totalMemoryUsed += GetHandleSize((Handle)tempMemBlock);
DisposeHandle((Handle)tempMemBlock);
tempMemBlock = nextBlock;
}
theTemporaryMemory = NULL;
# if !defined(SILENT) && !defined(SHARED_LIBRARY_BUILD)
fprintf(stdout, "[total memory used: %ld bytes.]\n",
totalMemoryUsed);
fprintf(stdout, "[total collections: %ld.]\n", GC_gc_no);
# endif
}
}
#if __option(far_data)
void* GC_MacGetDataEnd()
{
CodeZeroHandle code0 = (CodeZeroHandle)GetResource('CODE', 0);
if (code0) {
long aboveA5Size = (**code0).aboveA5;
ReleaseResource((Handle)code0);
return (LMGetCurrentA5() + aboveA5Size);
}
fprintf(stderr, "Couldn't load the jump table.");
exit(-1);
return 0;
}
#endif /* __option(far_data) */
+886
View File
@@ -0,0 +1,886 @@
(This file must be converted with BinHex 4.0)
:$deKBe"bEfTPBh4c,R0TG!"6594%8dP8)3#3"&)e!!!"4UiT8dP8)3!(!!"50A*
-BA8#ZJ#3!aB"#3d0#'GM,MBi5bkjBf038%-ZZ3#3%)Zi!*!8"@`!N!6rN!4069"
568e$3`%!UbqAD+X`19S!!!Ba!!!,*J!!!F%!!!-PfTmj1`#3"PET)d31)LTH6H4
#*AqG5b5HI*)QjY$IIb00%ReTJSi6rG$jG(bZ,"Rc,9Umf[IRj)6FZ-j`GfGR)#!
m-#qLqB#cj'G%46qffB3q8AppLXKc+P&*il4FMJMq3N32r[U,(PlSNdrQm-J(4!p
jK)NHmKJSHY!,&chS$4)pk%8mL3I)B0'$AU6S3'q)k%%[5[5J&ffa#68)0ZM&#T!
!*fHC-2dFZ3i83[Vr[4Xh'+DNQrm'J)rrpqe%ST`,FeVi6b,*qHH")4eQc28NFMN
ZT*m,L"Y%-`pdAk6RLHDaeVV0a,,@P(4UUK66rUM'8bf91llS("lTh81)MBQ+4*q
rfHENEhD)Ke#3!09'M%bL[P1+G88fa$3e)5Gpf0kARpBf*6eIH*0`ZBHR%ii"PbN
+D&*)688M)Sm$Bm[cCdDjh2YIjmAc`(TVpi*Vka((A*&Yl@'LTSH1M*AMP#,2[A$
(FHA@S"dL4dER#3b!EfBYem(C9P5iGH"a-bb-AL(F"bb-AL,F6)%a9pJUL,(hf%B
TeQb["X5ib4DQXV!-fa6&mZf&3,(C&UDd-((SpeMBEIB`8Zc,BcZR3A5'X+jYj$'
6)6HVV+R[!`#3!`X!(E@*MFQ%R4d"))`m[3JM[c)bBS54Tj'M(AP+MK&f%VD5SdG
SANFB@3Rqc$Am83(+)`"G(D%A'9!bBQ6!b)b4Sq3SH8D1NDGNX$)bBi54!51--$*
Kj0L!M"KKK"dC--,)-h+-6#KKC-$)-F)NamL!!Z06#X!!b&%bBUHp8RcN'%%6!b,
i!!kV"`"DLHFaK*!!"Ym4K,,2i2X4c[,`c5!GIPf!ZcNi'8'VfJFpSfdpq+CY$8j
-V'f-DZr2[36#1(ael5hmfT@1cSU66D5pqDSA89pdTP-`Z[jj6T&!PmZBFZjal"&
5iG6#blE$+&kLh#QZ118&(0T1J(hZ,9)5MJ9ic*qPI!ac'RJ96QMZjSbkMq()Ui6
B+f,,#'N1icbM4N"aaBr1`3Z9U'8RY'XAiVXFKp#&k2D5Be%VCdh4%,+2QS'b"Q2
%0PNT4rE#%kTUFqYDM56bVjfe!p8MqmL)1VmjVkJY`U[*$&*L3AMSpB@LCQ*U&l%
T+3890rL,V9klFN*4@f0UTf8Z&&afN!"4GC6G8p3fN9$4+4[-@DAeK%lej"@eAAL
eU@&4[Tm28%mqqUkS(F+VDa#lB&'rlRAllRP&l460Qc,)MHR$jMh@$8Y4Xc'e`cd
ZE2AUUiH+fK96feb$epq&'RAQeLG&lCDjmP+"Kr8k9#qp'eI8RPf[6R$dS+$UcqI
ELYSV[*ETFL&j[@lr803qd9I2A#bi4Vei3*d[+@Urk*!!&abe0HTVm%44"i4A6JN
c(2I!kjRl6a9e813DK"A6p(LjRZZGaGH+1L5SiBT[(6ekd2*ILMSXU(l)#m3QMDB
V+QTG!r*NG#RQai#DNh4,l0&!Ie`dYi98Y1%1A$5hKP4,`d9cHdKP'LkD@q4hYC*
%dfdLeCCNN@i9UIBNLh5l5(8N68qhM&4R`d9cfdKP'bkD@dHU+qe&XRfNZSqc10j
#8Me*&ZNfNZT0hSYd+dP&ri-FGM6G6P,p5D,rPNT0`dQLk5+6'NLb5"HDe'$L)Pe
X8N2bj-Z'$r$6-$NZjLGC)1lB-"jQSff@[ak%LJ[rI#%p2ddAGREN(@"V+,S6CI!
I!!!0$3KRBbj38%-ZZ@0M8&"$,VN!N"#$BJ#3%4B!!!d'!*!%rj!%68e38Ne33d-
"!+X[PfqV-$P*!!!'-3!!&UB!!!(&!!!&C80(jji!N!BMM#0%$L)UANhN3L9rV@9
B`f#c2p$XpAVVCc-[`k20Y5bJ+CTHPScj`Z'!lmr*#EPaRH(ZcR!J!!rqMKG"q)#
cj'G%46qffB3q8Aqp4R6FA83PM6`KUjaYD&IlZ@jDrY"pk[b&AZrdH*kFbb9PM*S
`4Kh$c8Lf0bVe+Y`Q$amM6mc%*C1(jF&1bFSdGIlLpc*04b#X&D8[&6R%+-#6HhJ
kX"#A+Bp6%6RGkB&kM%'jh$ZLmam[1Irq,r82rGM"5H4bh1ZB+b"Z%&-pD)5CL9(
AP(4UUK6$!(lkH+UPFXFARF-MIHHMXf!5Nd%SZYRQj'pfL)G3N!$94X#(q25G8U`
VXL'QU3Njk8[phV2@0Q92J#d6rA2N1["[!%c(M4X-8p,0IcYJf2lRBmD2c)*RQEF
68m'9jqq*MjHTji&GqDp$kh501r9fqVPJe4iQDRS)L!)ELqiX08i#@40jpP1+F@p
iC&))L)Qq4Bk-cK-i*h`cDlN1cMBUbZA3+beKhX*-&UD`X%ME%F91fHB3BaCC''Y
KNba-C@(,"-40Yl"l,#c8`YCDf%#"XGD%F4m3'*i'k"iah[Ddam+k"Xd3eV@02'B
bj'D90I9p!!!-q)[jAU2HhQ[NiCQC&f(Ne`JR!hlN1''4Sjc`)hcL5IK+f(@8(q&
(1&Nj2XreTBI[M!0dGB4'MK01#CFF2c,JK"*1MNZ1(q&(11@5ii5EKimF*ja``Np
#bA(#bBL6BpQ6jq5imT-m2mQ!dq2N'H&2RT2M%Nii'6$J,PF!#N#jGS3IS9Uba%G
'A-)*8[#%!j-9'#r3@EpUPQ9+NL6$ldj*kVS6INIK@`*q'q$hGRJCPb,`pUJm(fQ
3!#mGrdQqe$Nm22hkJ2cerNp"i3$m4Z62S5YA40V([V`MbHF@)QPT2IN@3@$ceHm
I&dT3GqF9K,'&&8[6LKMTbQ6@-*%bJE#4RM,b'FA*'VC5`0BBdTa"@aNXM#)mU'"
N@d@XSIKMMiMh#RbbLSjLT49GG9"F84)Q8QfN&![N1hK"A'V5F,,dJIF@+`iNJEb
H-(5Nar84j!"*Q54MH+j&08dYQc,(ipT9I+aFqIQc-XP313&803UUPPD4*+UAIlj
$U+jMAP1QUSfEYV2Qp4HKfZ#TYQTCT)hEaCbp+ZXH0"m5USfHDV1HbL4cCT@41rr
5+d+eL4&+'hR90)iLRp$LYcm)e5McQN@UMR#&$kKqr%eHU-DBejbUCC-k+P4N5r%
Iha+Uc5aj)kVfm*'ej*8Dali5ULfHDLah-l$Zfer1#G9@6l8TTf*r,RKTZ2#Q8'h
MA2&i%MYq(0aCicHKfPlfDYLeJ3*FFEG3l@"HmfJbqFrdHU&IU+jRHE95BmQFkJF
29)qp)93hX!aCGLfYP0!jSEU4HF9)-e8M9rADGfC4U(BbVVC66+8XR2Hj2RAmGk'
kLDNk8`@p0[6F"hrG,e3h`kmm(BhDMQjBm@`ejDH1pG)YbUXYM'Y'5aD`-H(VPZ)
,*i6A,Nqe)D1Y'5@UV@HM3VAE)a3$3MT+9jAGa)HI#%*E@9ie+jmf-PA9dY#66`Z
[fkMA!l&$eZ3)bP996crcal6`ZRdT$9NG0S#+V([`rRZ&eae,A%dMGB2V4H%9YPL
LfZ3B194,NC[ik!QKZSYlaE"deVc1$3[9(XVeFJIG0T,9**@'AVXJZ2Db$%'!,$a
e+d2+8SES`Z&RD1(C`m,VlM*Aj)cP#M@ZlJI#Djp(U28`fl)VL9dKY+IXeFM!HRJ
MVc0#YCpj6@!,M0VrHYh,CMQN!FBjl1ZVEPhjaCK)``"6,6JiU@@ekMjdmEEPI@M
3DpXKj3pi+f`LFFpIUPrF058)N4X)f4ZQ*P5c1[&!pGhC4i@Ue2BCE"bRL&haLRk
Thb#ZUK&ZK-Kc9k4Z-[QKhdaf&1KhN!#*#IdZ-XfJhdPQ)I6l#![SYjD'HXp$hdA
f$1LhNlN-r4DbV8$I8iS[RSEqj#URqY@$9b3dJG1XG))%khUHJMX,Vh896Z%"I%B
PFK1MejpP2[@,$LpbTe[Q%h#[hhai0BBHF+r-MrTeL9G6k!!IKHa1rmf2qMf,9c6
d)%I[5Hq$1hVVq60(`H@-9fb&cfkb$BBDc1-Ck@@#jrVH%0cXH$@cIK[C#F&2Q9X
[qpl(HTpEQ9F`KqVA3&iYS3Pl6#ARpIXMVpCP6[+ma`PkbJPkbJPkbJPkbJPkbJP
kbJPkbJPkbJPk1MHKTlbJTlbJpqGlF2RNe4CD`1XDTfUZEYjDHE@[F0T$,KbK"Vc
mA!9AAPiGS3Qjm[HQi+l-LraVj'p1i3&mcNKce1@eZ4pFX(PY@1(66rD18)Im"eF
YAJ1K#AYcK92peXpVBfM#AZAIKi*r&r$U$"h)dkhp2[JI!kp0S3GjhdZZV))A!43
jH4kk(TLQKF4pTXhHI!ITRb%hcX3KfeN#**1EI54a"'@Z8(9Dm%D@b"Y#qhm!N!-
0!!PRBfaTBLda,VPM8&"$,VN!N"#ah3#3%!9X!!!I``#3"2q3"&"56dT,38K-!3#
TY1))Uc!eD!!!@F-!N!B563#3"2$I!*!)22J1`2KbNQaPEr+hGEX``Jk!Vpa0&eT
RDl*eSGZ&%EEAc@iGG+hAYBDRapHZd6ETQH'lV2AbpMVJ4lN,ck0G4lMb)fcKAQi
*AeLhm1)VRfPGM,"Zi8pBG1%a3VYZi@m,@rM#2'iAfhjHacE,K"[bJGYB,ZcNP&#
"$cqJ[fRG`SmXR'aMC-H6r-)AXTaNHE+Fj"HkN!"0"R[G!H4jITB&`!(!dKX"PZ#
Z+PX+S(dCS&YGZI3,cN3L+P4H)V5R@D3p,54$JD"3'!j')mhRcl%mUJ)9e2PVUaF
j[6lNX)ll!4,jajb6UrZK!hSTX[caD`$ZIHl,pdeVm&EaLeKG-YjQB6AKT)84pF,
kB$+55%ID`b-4QF0T19ckfSl,d['15$X-4cTr0"2!dIR5%1j[S4JQa0,J4lT!pkc
"EjcQ2ZmmNDF36,1DH)X!8($N3ihbR+mcX1GC!E!0fi)+ra)rCUL`#HU&V9)ke`6
IhTB!b&RK%B!&4fA8Ecr8+8IBcr)4Z8L+$bmVaA0$-Lr)$3+SMf0Xkh!%1L(hiM$
H56i!P'Q(V3ZXrmCRE,f[6f'0N!"Z$E6%fl(AqCL20Ka-#kRdjh`qA&CRACe[!5i
+PSiKjh)6PJM4H$#5%&U%HF#GqF0F$MM6fH)T68dFSQ!hQ*["e3hGME'TS#e`Fmq
Sl`'0qRTZMfEcM@b8M`(hV,a,kqB4N8iZ[4Sh5b!9ddQpT9YP#5UK!NX`BDbr,"E
!TME)X#08Bm,*$)fP2Ci@G1bTGUbETe@@q%4QL60h[2d5)BQGX-U5,*6)q)99'NX
bP3a1pJZTH#BC&"!P%4'5XP`!Fm82LidDE@#h&eejC#m'cSQd"k1C&S(CD`*"Va"
S%C+TmmkE6aJ*6S3kTd8)4GS&PNjQ"#DY1419T&!JQT+cV-0*5@'9$$5+K-58Y"%
N8Ea'&)q3!*!!UeBZ'qd'!&14D",LQVJ'$qTI1DUU3$%0cAD!e9HMkl`KaGAASBj
TJ#pMhSb5Rq0c+LJ3l3LJkD2dcrJM2Q%3Kh&mZL-JR(&m+L$L-)j29b,%B4br8)j
X!Y$j4ZUh`)[eI!A!R(d!4AHG`LH[d[f@re6*b2mAI`)H5F0aI+2XYq2iC)+N`6M
qC$b5"Z2ij,N%KHI*24K!$k@Plm*Hm'Rd8-bci0h@*rK6m%JDM[-[aZ1Nhq+IKNH
UJA&mE-V&'KM(2a129!2Mq2,5(2qIrSHmNfTSR2rTH+3D'XHRfL81irM8FE,Ep4r
eTUeM[5Ra8bilkJJ6f!)lF0e(0'p*Cke+2Nq9ccEjh#UIZq6c&[RmM(3ZV*!!cL0
k&5l"Jp4$Ilc)-m$9BDMqeV0m$l6LhM(EAX9A,10lG,aR)2GNb6Sm29&b0@CfmMd
&Mr!pHLh'hX&p"qiPVV#h)jIcaN(YAHVY!-im,lH&lp&Fc$pX!KD$+,qKqbMQh",
@BjDAX[M-KFF0&bH!le%r'GC@E`LVXP9mKXdeG)3QcED[U18Vq4jY2c-fD8XFl$a
Jb0pEdXPRCYXVR!e1c(f%qF`GKAUQcPT3T6E-YjCF2GYHhq#[aqa0'*p@XJl4r*8
qM(Fa(e1(MAb2DUZDVTq-SD2mJ+kFAj*ldAQmX-KFQf"C5i,E1fA&P2jHj`!8*c4
Cbq,eU+LUqmriLrQ-H$8"RJ(GXC,YKXYCKk(M!EcN!3MV-HG3b@DB@MEAd"P5,9[
2CjDYplkH1ckr$1D5aNf'jH[,p0ehXaPCKe@(eI0#11SC',UQT)X9K3qD(G8hK#c
C@GQUfADhU*AQPE#2X"A&i-9KaAUdDe$"bpQU)@mfJNfL,U61YQ4RBFiKFac+[hC
Y@49Fi(Ye4UjKII9Fl[b`UM[(Ca+6ZhF[@mq`0Seer)R3*#Y$$IcK`pPc%EI6FKZ
I`IV"'%bLZK'Mdl!5jqQ+3J!feU'k*f(FZf(EGY@@N!!CGAmMqd9@CrDD68d'jf(
3TlQV6AYhAEJlGh4$epjV3bSqBiDXKA!BPjeTVUYp1pI,DPfESAK1"2eSD[B-elh
H#"KCEIFl0K-Um0E-CFr[,$HC6Hhc`fDr-eb-HmN5*`iSE-8)!#TL+mfKpUV"jrc
$X6fMXIlRYZ5'5$I94YXX-&C(`""L$Dkf)VmVe*%)GZr'mh(#3i3EqlYKNKblRf*
'9fi`h"aV43`ejERI0DPfA"MDB``XX)HHa#bYS3h1c!hCcPlQ0+mDh0Yr`mEU8Hk
YrAmUXCIMj8SFBkA%6iNVCjRI%C(IMj&E3@l3G[C&a#hGId-rBQbXrT)c0e6q'2p
eC)89`[fJmPd62,qrh"5fBCA-$%rb1d1R5hbj`ddQ1G,60%Q1l'T#EqB1)110@)h
%i!95M+ekEiM0HfqSHM1k9UQY&%V$jTQPB&VZFVm*4FmG"[Acbff$#qbZ,a3IKUr
B"VZ2A1J-[B%elK$paa&k8Z63JaakNVNdL$c1fP%+A`QGIJ'bm6iH0ZklkX(0S"E
8jP*3Mb,[3pbE@&fLD'2RS@ZY1`pG"kj1X1j#2R9*X*QX*TAMbYcVef*YX2)T6FA
Q@D$Hf'AE5@VBGSP+2*elSqN#9T4Gc"`I)"SMr!P3K8hPL)Se--@E+!*#j8qBAdA
F)f`H'*JMT!TSH@V*`'V2IZI1K@DpeEljYRXA2YJ9eU,IcfjLaVQJjXS%LTUELM'
UNU1Q*M@HTVX(FV[-AA`QqadqFr3i9[JU81PlSB$r%d$A3iqhZfXV+KG!GjBeeU(
[-cfI+9deX0(XqqDqeeCrEqGcqm6iUPf$i$#AQd`B@p0rSjJ6NR2d'hX'fX5-"MQ
MU,pRS%(-F-NCDZeUk[$*BA*h$2XG9RaZHj-D6bq3!1YJC6AD61@QEFZ@lXi09,[
#3r`40LMRE"V0'C!!FecYKJh1Q(D[`hN%90BLbX@@Y!c8C8j3QmY!ApD)[GhVGTJ
**CcApF6MTA!ZjkemqUrh9AKG,PI[cVeVI+q#h6`$QIm$kKcXmZ"@c&ph+[pbaRf
+-2[6I1-)JqV1YQR9UpZ-&Cd9Uc'6i5P6JCdV6"8c-TKV%$1eQ*@af2(L22GJCe"
VaTDFcfaEffcXh1Pef-$Pm$Vic)0VQmqbL$(+mRVQJpGcr8kVcZZakIJ-9F5"VJ2
A)XVacTfpDfd&ZhSY"9l2XleH6rpD3Epa6E1D10FlQJjH!G34SPGS&qM3*fC3Pe2
L`2L%lVY,CV!*T39qcpXH[fHHVQRU'%UAhk2&Qk`VKaD[,i2ZHk`cX2[6K&iQRrQ
lbPXmS@QX)1Y!&RH`da"Y"8BfPYDc4GPC#3lV4AhlG+E(2&HTGaMM!VD)&65CaPL
Dr4lQB&J09`k9kE(,mhf[0f[T[[2#[mfpH2-6*6k4bk,U5Z`kcd%Ia$UcfEZ2Z!G
1&'%PEF2B1aKl$'0hBH`R',X1BjX`pP1-h6AD-aHa8TJD0Z"T@[KdIJ$5L*0!R+1
)NmCi#mDEj(J5i`fS4KaV[49[Y[ASjjGJCfSIkdaR)f+)e-#cLpMMH4iTJQFE+B$
RFiN4RXfXNFpBZGXAc[3QM,G2Yh*CMh@3!(q8lFE6#ID-P'YZ"AefKT9M99N2Re%
Z5UJ[cKd0UjR$Y@%N5eQr[bVdDANH1X3[2[#XjcJ0%Se1!jKa'U#f[M%BE`p&`TC
@-mfEF*1J""c`J'Sc4b0!`0Q1cH9X!e(3aCl!)H`k4qIhpfYS1)*',+EMMLJR'JM
*XAVRp4,L3*6EFHJLENI+bThcfZ@BBX$BV8U1Sr-@+@iljX&F'M+D6*J-'5#(%1k
[1&EhlT'("@L3!%(&RA-a6V0,2#9X9%3D8*&8fT'k`V(k5V),NCZX$kh*MY@GDYV
4Y-8%c[bAlh!l-U6&69c*e@N4Mj-C)C2d+XbiMLZjUSJ3--Aq8HQ-$[R0RcMaPa8
e&lLqlpUj[TGS[iMVqri'VZr9AUl[KhZi[J-YA0r"GUl[d&eFhq'YA0rr0h*pEml
RqYlHa2Ap"212)[Ba!pGh2-6e$Gc+p3dqbr80[FMe`hbZAjA&I4IA2aN0'##DQ-I
F0B%8$M1bX*!!6V&dUi!$KD&N2-DNDAZFBic&F2BrKF2r6-!j%"D+4)8c'q,aD,f
3!-3j51B9SJP@RdlLA(j+(8X++A@L25E3BD9ki@,HV9l@i1F0$6KDbP$RC(bL'2*
%ikP8)(QCZL15MXe30%"dDAVbI)DMURqBCV&i5b4dfDrbrk!LN!!@@#SGL#9B+*j
N3JH#Y3HLV#@5r"fhhq@IS5Jp9LM&BLQF6+PSMTk2cbS%9c)KQ@5a90K#Sf4N5PN
S5M[3da4hiQK)k+XiA(ND$YpSYSe-m)LIZ,6N5rL%!p$M"e)Z2G@JJJ8FXU,((EM
pQ)@$C4*&(*ZN6`SqKSGP)q02Q+F@[iqA@RaFJFBHbCM4qfMF%h!%89`D('LN6e`
k'KDkIh4i5)XM8r4*4)JcM9hKZ+)%Kcj2Rl4%aj+pAcSALTmN,qQmF&6[3Z`$k*0
%H%M18RJEF-b22R&0qM&+6,@P[&-a!BIik*1U!BGKe64B611lY)`iBNHI9"S+Ab9
l)JjKd5HT3V25,H+!P%`9Z`rkT%9kNCS1THY!pHQ6Q&%@$8)T99L%Sfhd5H*hI$J
64C28Y,C`Djl#m$6b!XGfTmrR*X8$d@L`Y6QkdK+%4i(E8[b59GP&,"cqQPC3ih4
MlA''N6k&X1iVfl4IfC%6%hNG3kaD8[4Nmd+LGcpXR+[Xb-XNFZZYEkLS`Q4G+Yd
5L413!'S-T`$1NR'U9P55`+R)+U%aM8!K9-"b-+[Xk$GR5FTkh)hN*rJB5@-L'EP
%j(6IK+GdbSlH-e9"XT!!TkM$335*3-%BFqd`miD+#P4)M`VKJ,5STAS-5DFJ,A9
lRF6mdQ"V)#Q+K-c,[YUNl&M9XNEZ@PkXmY(k8'eCj+P3G[5T%69*)e+cY5@CqV"
#$%SP0969B)9`fR3N*L#-jAfF#50kqURL8%pU-)M3+FmipZBILqkTH!E9YJip)aj
%`mKhi"GMeDhkeqSZq1IU*VIi[,SeRcM3"dM$M['C$j!!BhcZ!m11mCN2&2k,$aK
qi32[Hr5%Rh[d,hX-I&T(k6&F2UIBBc4(!m'9d93k(d+2NBr*-djj`D*SpBJAZ,f
9j!86F'3iZ$+9LDAqShqJf[jh,cLPbr2V[SPKZ8BUA*j'UT'@jR"M,2UIAFerUC*
hbU&Hqqk24KaUB492qKV`$C4!&+Z"V#$rQ"GJ24rmKPrCa6X4KAZ0c$d@5+lmTal
hVejS(qNI[*91V#iSP&p#b,2@2paR1A6E52mJe6FBBMJ1dGJL*2+9p3qIhj!![Bp
M('C8fB"h)XK)5,I&%TpfThIZ`BHa&(9Vm2+9kL#QA,kQIZdYiIaLYrARRVV2f2q
YNG[k'UGr%8DeBN-EK0EmEAlarTd(p5,rIHIa&j&hIpETLXk#R@jbC@-b,9jkj$[
SG20dc3jaep#MG,*Rm*9,kClGd#jFfLM2Qq@TmibVrRcNcU2@95h1CX5Efl"&%5r
8mURGV@U5ZdHGS,k4EYRemG4[EPCrFjZ4PqYQYFV$Li`LB4cI%5Ak4CIabTc4cV5
Z`5pfTSPdXM(B'Xb,d*RQlCVl-6rbfNK(iUpddhemB9))4J14@"k%hM42efh'efl
%*i192U1qBE',qSa81Y2F(%qfjbIV-mbRlM2Dk!QiiGN-X@CeBXhQjHJG2R%#l)P
%*m$r!"'46R)DGS+2k[XNTp(qiGGq@r81$FI)IYZ`[)lZM!cTba)YbQKh2VHq(T'
iYATPahXMf583L9i#-b!5'SA3JP$LMk5FV"eL5P&e,)!2AM(fqq[&rAqqJEX3ZJ0
4GUAcq1#I[$MlrpXrj3jb$ZiY+2BkkdRM@qKR3r"mcb,mia%m2lM89dZ[Vqh!-,f
QqNbpVjjZ29qJCq04M`2d!b+N'UT5MqGLqX832%q[Aej$mA2Gr%)2D,J,T!VQVUK
`%6jhAB9V+HAI4,rjJHFl+Pb,m4eQEZZ5@KrPp5aF@N9GqC2+ql1S&YkPdTmG6Gr
!qEV`09U+&4c&223NLQNk-DpALZNdR1mDqVXNM'QAB`crlBKL%mp(M*G"*FCZ`&J
DZ&cZG*Ki-f,J@mmLMhX`*R29E-FB[Qe,XDNr4DlPFZc[1GrDKlkqQYkKeBBaYUl
YEqK(@E3aM+N[HKM14ThU%2X*Hb(-`McNHXhpB"3j2BDaPJB6I!Ne%&qEaD`r`V`
YU-G"k"3ar)MaKKaEKl'$NQC6hd1-Lq4B$Q0G-XB+e-BRajCJ,+'*V3bd4NrqAp,
B[bJT[kddmXG*R(e#AIa5)9RRT[cr!`!!$3!*Cf0XD@)Y-LkjBe"33bkj!*!3qL)
!N"!0"J!!,h3!N!6rN!438Np+5d&)6!%!UE6L#+X`0A!!!#*k!*!'$d%!N!43[J#
3#1j"$F$iCXbcEQ9ffFS2dS@*jbZl63NYVcACZY$0##1XPDZ$V[@ke[$dmVQ6K5h
FYGEmE+(Rmc@246PGf0D9hF)@VNAi`VhS`KGM(GQA+lmmdfiI)f`c`Tq`63P23V[
Y`VEH`KHqX)9f(@(E*!Zrf-)@IZi)AhKXi3[E,M3j*432"&!HrHaD@&$M#f(,qq3
@XL1hN!$"3Rk6AcKCb%+1%di@J&@""TeG+a&(42abSQ*m9@@VL(4[%29TUPEGj%S
NfN09'd1a&"q0T8,*F(-`0#85E)pZZ-eZrEB+Z[80G6A,A6ir2'5jYd$i*mlPdrI
-@8-1XA6I6r6dUG[h&cAjUSAPI(dbhQEPDb0*+mqX6fN-*U1*9$3@'8GN$c0%(%0
GelfTH&Fd4Q0)jLrR%MNc2aM&pcf8d``Y,Ak!B(cHb*GQH1E2Phb'JLQq0Yi5)P*
IZ&DMccNrDX`mDiN1BLbSE&MC!)B+3p!!(FM4Z3"pmf##5,64Fd39&fA9Eck6N4(
q-Kr+TK`qGQ`-&dGPAb51%'Q'J"dB3bK$iZYMHPIm%$'QJ`j8f2l6cq5j@TmTYD&
8Dh0,2)CCjkGqG*&J+Y5CqU@IDmIQUUrh9q!`X*4GG$59b(1#DBYLrXT3Hc`B6B4
D3NZ)Zr'(SNLFq4ETPX+0#01J@-c9Mci&E"ETe"lZK'B2D682F5pVpcl#6cM0`cF
VIh2RdI%LA6N'$6l@jXi1I@kfp+LX3395@i-*Bq1p(FdBDS-m*N)0#&FB@QXXRJV
TqHr&d$F[UDca!YiDjchaf-C3%T1`bTUFNM26%1V@@T1GbH#dKP"R2*d-KU#5L)D
5FVQ)&NXr0"XEY)Prh,6j`NN!Fk+aB(Zk*F3lDTZ$[P"c5bMC1Arq8UD4i#5T15f
KF$3@iP2*G)M2RB8&#LRFh0iTXfaMT'5S@aDD8))aK6DZ*"9[2BV(P+51c4hG,L+
c53S*k44Xa8Acmd49U9R$Xk-p6,4P'e,Rh4bZH3"e6"(G$Pjab5Ikh&MNk*3JKBH
am`[rd,p4KJ)IdrpGAkQ!SYrdArSB+K6p(4q-kaYR%DeiK@MHTTrT+airpFpf(!c
C6D6hMrH[fSGq[SpSi@NLdj2ApC8!q05rrM0pH5A%p,FGr*AqP!RpYPrTjl,kIr)
Mrc0p)kiXJcl9Cb(1%'6hP`BRQ0MP'EU4U`lF@CCrSLp0(%#3!"HAp98B52*lSGq
&ZrfkrM3CD5@kEp'%2R+m!*ldPFM#f(9p0R-`C#rdT5&)cLr`#Kk#rMULrlIXZ[j
d'6P$Y0N+!(Y!54rDdc&h'$"brDYqB3l4$[hhr$0$4PE$2eXNb2ieb2fErJLM)1T
RZCa*(rQIH68r2Xk[*I+#iKreEj!!r52r-kc1XRmYjSpI3ai@B(RaKIqI,BSqG$#
E'MkH69X[ckB'iJEe$Qi`RhhAFB-&cq&lKKZFKRc"-D9m50)#'Z6Fp%2+jFLffS0
N5Tj%4@C5"GI&cC(ZFcD,h$e838lFZmM*m-eX'F$dP%A,,mqff[SF8$&N-KPiM91
9NF2XSa0J@f1fH(J8"hGPCVYkTSRLJ,V55r6R486P'%J,"U5PdFrVi(p*UM20Z#1
AjGIGE[0r"EdLeqdcjp[mNSplX,Y)hCYJ5aj0I@@G*jb-Gm65lHf-'iiR1d+aG!I
M4Q-YACfKpTEfZ,40CpQLY-XkZ5B+lNFp6BS(cVppFXHLm)JE3biI%jRZ4TD29iR
SY!R1P$QEBbjeBD*lqi'1GccMbIje'bEC1H@a56dI1a@*I@9pEqBF-qYcdaaAM`b
5FjP9B(QLVT*e4Aa$'kXN*T*FX[j[jrbLXcJ8Me@X&Eh%AL-JTT!!Gd4B3#S&rjI
6(0UBDSje*M'BT4+G-9BhC9*@-5jcH$[1@!XpJKl'$ZGDCHXmRb03ICB4reapCC!
!(Mqj("6&rGSNfp+B@FQGKfZV'cfXb6ZLR8&V%2h"l5[mJ8hjJPR%eT0&kPUA"r-
MPcHq*D-)FI[,GTp4[[$$5jiqJ&BGP+G#UkjaI6!H#dFM9NbNa28pDebXI1(,,(N
ED'bUV!CChjPULFDCN!"U8NG00mXke@ZV@1Ge4VY$ke-3#PpeT"PAmJT`"+9)V,N
pTl6IHLkVI,'RZ6PAIkpR2HXM[+GCRdK'0dVZpqGr6kpmXC'CT5KCd3'NL33K%LA
eT(2pQ21Q5[3dR+GDX116UUkC9$)S5UXm2KGcINq`Y6NTP421bhiMS(ba5j&Vj+N
6f#aTQ1JNeElPhNVPLj`GVbDV%DYQDdZbmeS[j5Xpee4GLelLG+PS4`JbeUXka[&
k0V$H4$f6H2FMHFHjNP0bI"Sd(Fh4'2DERk5`R-%10TmaEFjrI`$I68b$mrG)kq6
aHBBP*&LlQC0%8Xl9HQQfr9b!L@&XcMHPT*eJ*QI3,1Ibj`$iNqZ&q@YbPJ1Ha&!
Tc3P+,rc(E-IjIaGE%9QEH@4l"'92bccba&FiN!#)&l6[jHikPAbI*GrYmVe9[[I
)phhbr86Z2U8bGeIk!)'b%TGV)mAiNDCMGeGHc9GI%IUT&GqZ"BjUSA+ed+mA[-2
LXC)(FAZaC"ZB'D&IrCc3Ep!"HarI&r!YF8GmAD,SLj2'YmVA4CaPLEK2k0IH*6a
V*Vk$fS9GI4I"H5aL!-[(@%*ka9$HA3N5qMA()VUDA4&9YPT)mi[cZX*6&cM@eJP
93VpZN!!h"R3P6RiqmI$[+mN)k3@15PH6#pcRH,qPD`T@&9NVUY3'[UeNf`)(%Um
4l0h!LdSHK&T$P4pi$qrR04'Md+mkS'(0E3aI&)EejF*+mAAAd"56T5l"Ckd*lZ6
dYG-("ec$9*M3CUehlN4&9Aer+0`PT+AR#H3GeRp3FMK[%pq9er8Y223JLKM!HEY
N,mdU@jbA#DY@la65UhIkhK'(PTE4BPEM30kDR@@'[UIiiUc6TNIh["CTp`k2hPr
5`jXLjbc1QSI$eZbmE28#KdHUPIB[)RkQV95-AKqV@,pZ+bUiLHmHp@@M''(eB8f
f*6X2R,FYF5Vrc4ePeE6)rfDaf,5cCM&h@d69*`VTa,5qikYhmZK0Ble`+6c9aU-
'$C(cf9ZKQl&q68LMIi$490Bh%PU%6PbL0f'aB1Hl9(X5aT1l$Kj@l3YE82GhXer
JkbdqLcQ3!1Fk6iB8YmemmZL+iq,&A6dRGi493YT#@5[6iERXA%YphBr&!El1[CF
+&dD44l1b0lLIpNA*b0Ie[@mhS`,[c9hpkT&bXm8F@aUa0,JLKIL@V(3KLJm!)8*
&l+8LDUmD1G8`KVdmJ3fHfLH1XVUTHZhcb&J6TE``hq4Z-c@i`ef*B0pah)HB(K3
H'HbMU6,f$BBChH*)C%0(+c3dM1IjL9Re`SV`bmEQ#NIi'&Lk[$Dk84behl,DCHN
H16RiF'r0K2I@`Gr,ZCIaFJ8(9XVm+EKbPreGN!$mr6@mUF84qbhVQ,I8i-1$d1L
YqD*,(#erAVJEVY!Kh&Y92c(6UfI+c4%lZQ4ZC'U$+c`cjjFl(c$,5(pJUS`F$5#
EZE0`h)YZC!jHBaAMZcmFjCGm1&U$M9+Ne&j+T4(,h&)bVh&lrSC-Tmk6jY8epT%
+KrZQ`[0dKhfNlm)+9rKGp,K6bKpRq*MNS4mHqT0LLL3I0lp35RH%Cbk#'pph)mE
6[h0S,fP#'NXTD5D86d2hbhap`Y5EHAZ(lFME$j!!1d1fSr"6Rb5lf@C@BB2jcJl
d"Pmq29"SQ8HDhKll%9B0qe'T%Lq*l`B@mDEXREcc)d9M9,K%USLj(+VSJHQqK)Q
BUR$*mLCd,r",+)phKPA01S'YCFRQb(lRkmXX"TYMlpHHARDS*k*$hLm)m'`$`C@
&''S*&!*9bDJjS-&YYQGB2'VT%G,Cl`MTLd2Sm'j5'3C),I`f)I@3!2%1,)HU+UJ
[bkq[4qlc"L&GfMhFDr(rrZQrf[,p)kG15hMhd4&b@XV0CQ"E"aq41''CBqMY(fk
6'%db`c6B2p`N-G`b3k2E`LC4PM$L%f0jKiiA$`FdZ,h'8JHGYGjZ,MFIA,hUZ$K
Fiik-#KIi%CQcHi)c,(2FXEaGVJlG5DIV!UPX*XE&5&T'QM)AD5aPC#KEMpRZ(3F
@d#@FcrhLGd[T9XjApG)IRkldZGhZJ5-RYrVI*)HP'-lr3A8KTMck#[J2AZG[`VV
Jha3@r)a[((G3NfNVUYR5CUc-9'i"NmFYABR*P@C*M$5iH4*6"eEDLVfl+"l+"(8
@M14#qZ$f$FE-%Cr66QkRcbQN$fhIF,09`KM,jee+2Zp$4fakRpHZ&p+X)mlfR0d
"PD(-NB(YG[A4!D[DjheP`1FGh"ibp'lGS''H'jf"FrF4Q`L4&ES+2A+LQ%dj*8l
JqAe2P46cqDAU"Zq2[3hH*IV!V%Q9RJD[$Y[IcD0hlLbM[MffBNarf[!E,'IqV1S
aElL)9fHGF2%%2`0UDi(dPMEbbl2c%Kck4I2iE0i!RV[80kDaL&r1U`2Q5CH@"Lr
[j0%0QdI,$*Mbr0mIb&Vl[VlL6mAA(hfaa#pj@9j6KDPc$R)3I@Chp&h`$&mbSC-
1!RXIf22!RJ6fYm!H!,BEf0m"Hh*LCMEaT63VNSGE8@5Q-%`Tk#5JFa%k+H!Y`!-
bRJ6HK'V%dHZYf,SBN!$R'c'C1LBRd`93$,0Ui1jQlR&I`LU#Zje9!2GEQ52F,Ia
k)@hM(PmfejF`2MlEaQ@pYK(Kfraah#la*h*F5bXCXX8fMUr1HS@dXLKKFl&i-D,
KRHjGikbVar'Y9la$l2RB6pmR,LdS'+0CVLaC,H`"dT@r%Z!F2cScr3P3LVMhU0$
RDQ6lXmIBIJ6h2FZaT-(pd#Tr(GX$[`!BEfIS4+1rNEepHBe0*1LCXfaR!QFkYKh
"[C!!E89`RpfiTTEKYhU%C9l5FSYb1eVZ[NShdqFHU(5[B[`[Xmd%lNp8ZZr%``V
Z`-Sk2q2e,eY9c6DeamCH2MPq""hf),AJ0Z`'mAk4BHU,`2"fN@(D$$6B3eKJHLe
ijh+BEJhfCmrNX"X@BR0iMP35pJI3b"!RLM2TKUm#`jj4mR%B@%X1Qrhh`&k8X3q
"I82'4(M5h,f&[F[64H#l[1e2f"XKA3FdhPMh,0f#,XX(PR*-SARJ23cXC6*+rTj
($GBeQHQ,U+Ad,JkXA`G[(hJpP*%d'S#PC1a"B'rNDPDX"RC'a[6!hT)eeX&I3XE
f-%rDMYpUEQfrmLafmJQYmYTfr+%XjmL[Mpm65YCl'2rr!!d!#'GMG'9cG#kjZ@0
38%-ZZ3#3%%0D!*!3(m-!!%+&!*!%rj!%8&*25NY"5%`"!+QdiJLV-$9B!!"5l3#
3"K+K!*!%$I3!N!Me"!i!pCQCc1abX2*Ef-,&mj8EA@KjV4fRQfkf--,fZP@[Eld
Z$dq2VmN'A5Bp-hbAY9lHAJFXfQdl+AG,Z2)ME*&GEJRrA-libQIDl@-,fic`*fc
6K5HKhAEKE`YIq-)mEQiRK(pXXmb@iapGq-+kKCfFELT3q1c,IZ&ZXPf1@pl#b%)
ffjdZC,)F@FK#&m,)B+r,!D4[CPq-FBbaqZ@-eH&@A,@%-I9,M(@V+THFE3i'I@,
PFV%p`R[E)f,)lA5*'SmV)SBMaKm`"H(DkkSAQQdeb1%*lP8%I"Kcj(3rX&H6m0M
IZTkaqjrj`UCT$PZ9X*!!V`m&fSamV5GNj#ReR!CAb"Z-H0XpDBqF`ePa(%eGaiT
)S-2EcP+HcTr1B+bXmm9Kh'q$6Mf`X[$"KF4R$RhYV2*CXk3m49H%V`fdL)`T"cl
J+-2j13Fpcq@-E8&E8'&IE%H%!Ne3,pZF#1HDf2Hf""Q,&l1('*Yr8%EphJ1GXSF
r%JrNr)3rGBV*(aq@mf,a)FC8Kq$ER2+`6KCr)B9h0"r'+0,%0Xm[rQdqSqFB2cQ
eBU69f4*S4krcbhc8LClZG$iIR'*cIAh0I"abUXM3iXkAEq$(ilQ,49r!j3f+,H)
maNhp56c112ejNK@"P6JkPXIB&fjK8aKcR!drZX6iG+jqq&li[TdQiqM4U(!CR@&
rGU+(,&FBA8QAdZJ+kKT@q*eSAPdm1Mm9!Sj'C"RE!a%aQhqm(IAaK-)B'-FE!ha
jS(fj'%,(Uc#'FK,*f-@9@FC3113DEaI$J@M)*3)Pk"9$i'!+Qm`pccf[0,(*#J2
h%ZcNS8*JE#k(6ij38,[0q$[cVaRB"FIjhRDA,pSLmUCDTmXQ1P[%8(M@V%X))mK
*81HhL'j[ZmK(3P'46jb,ab@$h%jI@)iU6J@&a*8bd!J5%NZ'TC%NDKY",5%K9lA
%%1kQ%f8Z9IE(4kQ5X*9Mq!UPK%dirih2+53-k[E(m!QELQ!-Rl#ccq$6B)6Z-I`
FQ(52iC0Hd6f'2a&QlKPm`YDG`5GX%V)aI-*'%r+rq)3prJ`qB9260)C2f"21i"-
feI!B2QRI@@I`#A[5'Ic*-1NH`dIV+GeMrFY8Q(52j8mG(mdXar#TGUKe(X1R`pq
T1G'EYSlfTT4IFZ446jL-RfpLA2G!eYX*@kf3!1dTXPdLfkfbh5AE'fAlbB5G8j'
`4rJkCZFXKT(SUhpj-0jKc0+KVIl1dd)2DmAG-GY8*93X&AUb"HYJr,'#0E!H,EJ
1NCe#Mr)KS8HMKZmGh)rJ,V"iE"haZ#h!9,BPYJl''HE&0`Sp@9F+$qSClfFqB9h
h3F6FlY%JbNC43[653pSVJdcS86hQ89H[mbKL98+8Rk[YF1I00PeH*e3+2HTqAYH
N,LMMCc%HqGX+1SASE&1&f@&'l%0mMD%M4m1VBND`e)EiiS,VCTXD(2B'40m'rl5
#08#c9pE!hmAAm#U26ZK4E&E48%VR2LJ-CTF+Lq-[Q!rPj"[UJRc-'14f6EKm3Rq
[HC!!63aQaBb,eS*44IHY`T9#9"TN-1YJpRX&fl4AmahDMZpMp-1B4i1Br38Ef*5
LZGT1Yf,T@L'kG+hYpILK5iVBA1+i5A[CfL*0plhmp&KCF6DUCir(CadF[VkJLmr
hl$189GrN0XCQaUTQQmSPVV*HpY33GT)apN++X4le+M"i0Epbf"EcSZR0GUYL,E'
CL0P[#,$5,pp39-AQe,`b2HjB@cfAZmLMk)i,dH$ilTe,er+S69fpF0LG9mb$!l[
R31a#i(BDla#LU"ri@"l9MH5GKNUFPjh[CUb%le$F&p6Y@VGPQf+Mf`$HhiaG`0F
EE!CpNpCmJ'NLh(AkA6XZh4NrZ+jVe`eZK4!eX*L4F(JZ0X03ArHcH#pICpR!*Pl
XK4j0L8ffh'rc-KeIere1L4i-[$eMkE2E5r8'IIXP(S2Gl*Q)Zf#a'@X,Qq&K$)b
8&-E"[@,S'A[+pp5)VrqCMI&KiNfa[Q3Qde9lQGE01baYqAD,Zb2SkYi*qa$K!H(
QrQk@*rZq5ckG*6lNDIDh!N0&FHA[kK@2A1Tq5ZHFEh)rKLLeYSe0M3qAR,I8E&J
jY+[rT[A9)lQhp[p4)R[CAjVd`eG)q5Ap59[1Ed$+lfq3!*Xb2P4bhK@8@k6rTRj
JV+rq[$NqA2U`m"9NK3VKAUem9mqHIDj8lbP"PFc`j0R0lNQ*I,N$6AVCdp18*hY
f0%'EZEh)H$fUN6,B3ica+pmIjZHp2ebp!DT9@&,)#Mf''B9-IjQPr#f@rm`"TRV
fXT+Kq5E,f4-2X#q@$(82A'Tf[iND,j2dTmcpQ*4$$h,S#F8M6-VMR%F+f4IGNqB
J'pZ22,VGhpLkJDP%PD'3!+P'N!"h!rF@[MkB[ljcr`h&frIIb#bGV(J(mUN2X4*
pX9j4GNhmp4Y3'hcTK+D*KTP-YEkVC$Za8E*$BZ+*q*Y0FrMmf#+ql$LLcLXFCJU
2[K5SU)%*YQ!q)e6KX1%9i!l`mjL@,h-VR'U"@M4@E)Vpm1i&"NfaDF-GpbrBfZ9
43qpR0r'kZ8c&&BRN0640K&FKHr90+PMRPJr'GaLkK'MXKd,di#&8q%UQd23bTI"
9"Y@$aT[+kbSUjl2Z'0pB$phR08+dF1AJHN20YhDrGZhcfjrC,IPAlKKLCBC5[4k
q9Idh5c&Z18Dc[QH`6BT`b"(jr6f$$LR#)NHSe0H#a(a5Q2KG+Ee$aFHh0DPJl5(
93@8ePZK,p9Z@,YNC(kbfH)D&!Aj)MVPY*'C3MV'dDpHCrHTGCHB"TLM1TeLdU%9
-9@4Q+N-4da3eSVGlhF4QX!,1CRRd4iAX3Xj@qF4Il+k`@5b@hZfl9Y@m`Nb'kFM
m(e%[4TI(rJ6aDdl'AmecRb,-rM4HPmkJZV0Y@[@eEEU+cSTV%FR$LPDJFf96T)J
SBV95T"T4851Qcr(ieNkAfS!@ABKZ@GfXkpaZ+bYKPM*EQ4$GZVVj(+2NSbLEp4*
QXhjcHh'fc9U5,85T)[CflEd"+)FkYrHZ,P(Zk$8UEGDRHfh@rY@LC[fUCKAPh&$
@Y1rVM$T#D)9kIMCdBMTe139Pm1GfheX`RFmY90UY2l2DVI1bQkD-SR6CVHVV',Y
QH0(D)YCpAr&dG(pClTG)CrkkmRDVHaU[M*8KLl[iXi"f16cV#a[iKE'C33leSVV
cA&k$1%ZK,B8aKer)+j[dSeNDl&DqM%FeA$0FT%'A9r0mEmcBIIHPIa9riGZ2&Y4
)Z5bXVN6AH6jd%(9@BZSH+"mmR)p+fJ,I1r!p$0mpm2dGI$I#GaYmI`rI25-pFcj
Ib+CiY,#QH5B*Jb`#R#"`$J)R!Rm,r%fb2`5r!f`%81ZYQ*CVS1I,dCQD4M[6f8"
d%aZ`,C3pl(R%#1`5BJ$fKC34E!2I+%5,Z6XAc,!&GAHH@mc&V-9$`JriRE!1mdm
QBJfY6"1EAXca96'V%%d15UJ[MKrdU2JbblTde+I(r2fRV)GU*0F[GKFZ'6FZ&@C
!@&e$S`1V*BfZ3,[Ekc'f'QM#1TGaI6mfFAd[dRd&lTYa2mhe[DcQqPkGarAYVFD
pRq[EGj!!kh[Gb2@pdFVerHebVZqYjlLqJ6bZladIehI`(Ul[(a4Fhf(J[@rMqRk
qJHZ,jh2ph!,FAqIkPGrNqY@YA,rQDG`$A2piD5R$)dE#I+49a0+%1a6`miQp3Qa
bq2hBFJaMcC%A-H[Lh9kI1084#2JDa"!f3ALEk![b$C%30K$$+Rp)$+Z#lAk4M'@
U"BZ%FY95Keh3%Y-m5!m&aNNZUbm3$MY$+e3GhSKrHRQY-ib9%UaRb2XM&r&Bb[Q
$#1m2Y(MG+riPr[FUR"'4$dHFrL$[$S4iX30Jl8iIhq)0r5khhm926M)p@LJ6T9)
i'P,4l,[)jI1kP[&L+-6l`aiMMHaaP!k@(kR(!$5jIF64)2HV9c"fkm2Bb8M[NA,
5*ahe$KKB9T9'TSPBKI4**`H4UR2Kk*+M&9J[`FHC*Q&NUD#pVUA83F[45Jadk'0
F3Yf1$dpTM65,Hfl&AGM3!#1U'a&eQabGKF82I&eA%c-D$%HjjT%"U4TMFAb*[&A
h)@)HETXFRBf&$h`V0NVHj1U3!,`K#cY(qL511H*j`3MI14L%iN0H')LU%pY@kEb
e@+I!ap@!&jDr$K6[395bNR+a,%&ISM6!LST@Uj*V5MUX3Y#A)"$4+kM@NKY`il$
S30pF$R`T#q@S*(BHeKMSieHp#Flf)`,0AQTaDcb@&2)PHQQ)5fb5Xdb1cXF+!Vj
N8DB2,Ic5f4Kjid'T!M!XRlE0,$48%8&NcjVeLhiPLG[pfVbedR#BF'qX0CFl+(-
SP#2N$)DCki1*FLTMEYAMF%qMfLlECUkT+5IZR$kIUlACYmcS)YhC12(&iZ3YB9'
@5Q5*+ZHdkID)X$BCAmp+hXKTKT6AHm#U3r4C*hSQB(BrU*ZE[*&EJ[hH"NF&f1H
b`j%@Ei"`&+-i5TRYhSDUbbZ*lE"hTGJB!9#%@0JA5pj3Yh-5l&V,'fQFRq0a03C
$hZ956TYb(mp1hP#k+8NN)bQBbZ-#L*FT4c0ATc*h9&5!)3dB`XSCTF08SdMC5D3
Pj6BcCAk9Up8CNNK#jN9IDNVH8!QCSr)k39+0G(N`aFD&eSVN$99-XdNF%CZY,D(
`"a@L69D5SkS@&F+T)ekr#"MM-CcF0*pfUMM`5Hd-*A450pjlk`mPT8VU"Y9h0R3
Mi#,4b)#J'D-9V[Mh#PIqZX**-8jAH0BrUp"aT*4UR0)#8Sh6@T!!8Se6@T!!maX
Yd(kN"FGd1[HIG2TA[3DH,8Mf'TBDXp4V02ZFVQ8q2,U3!#'KemM%T"XRp@#KVcU
Y"q@f5Y+$A#aMZCD&Srj`4S3qiL3hckljPY445pa8@+b09#FYcCj'[bpc@BGcr'Q
!%69iq@)m[C*8URU(RG4!'ib%'PfYVS`*8j,-6"h[aReIXbG[D8k5c,e@cYh[$#h
lT)pilFFr65[(JLU"+N',p`QF2Y40KM[Pq2-plHN1e&CT4R@a((P61@0C"rU4'Q`
blVmMh8FNDTaTr9MRD@`4JjR-qSM6-pGM1,T84T8160L3!*%BDI-(2jh'hIh8YR5
r8BZ42Y@"2cR5GhfQ,m$+0,B(FZ(*qFCchdR[JG5Dl3[K98[0EFBhc6Jf!k'Hj$p
R)(rUIIG)ebZT#lVHd,,'8%3DJQ5UfdlEP"@LKiU5A8P9!ff@U2hH-(@biF`FQ[(
KV+6++NJeiI9JS(a#A@K@FPTGe,p@Pj4QR&)AdSc6kT,5M&2U3T15dqU5QT4mULl
T5FPrl#eaeipXJ`L95k4YN!"fmDV'M(FlXp`hrMJpBDZc9%XlCB(Q0M6#dJJhdpT
%2bZdFd30'KTT[d-6#2rA22prCQFCZHEjar[pNj2C69PYp)K@DM)V+8'fT!3C%RU
0$!Sc%%F&0K8NII&jQb@NScQPp1@%DKc0DD4,rDbV-ccd@PV(lCAPY$H4%a*G2UI
ARl'MdM)(c3+5MpDF8)f1Rr4*kNc)faB*9I4DMcVDlZfJPej1UXfAEck8RMde1"C
Ci0@')p(QjN#S(A*Mr%a[J*8"E)T3G!%pL5YhHBl+"RVj4bhpa)5,Y@G#d)*M[FH
rp@3IGap(N9*kF+TlbrUSQrlA5IIaD[aidXeYj&CVNMH83&CM+!&9RaC+%&Q"[`%
!PM5C'9(,)ph(*fUTr9!YMqT9DV2iP&iGfErj4+r'r8D[mMkHFibb02iMPNjf1PA
[d("$VLh(CI8d(p1LX&VN*cJbP(8k[pfF2kE#ZPqTX(51-%LC%ZXU[a22)[*i8[E
rZJ[cIcUGL4G#pHMBk,e2kCF0VX,2PP#E5Iik[#T1$qmHrqXJc[6'Fa2`XLUETTM
$*YV-$D3cYp12%m#qEb(qhJ$feL8eGE5PqJMF0!YqXU&'QZAY39+9b(8[r8`"-MX
Ah$6![T!!ITF!pTb'bfV*EbNA&PMaKL[H#UA+i@kTX"!qGeH&C3R&EkCI&X"$k6d
9PN9@f#m[VUY"R%+aB%N90%@4PhahPUZj([c3IkY-$A%eUr''+[Q8"m(LQS3[kcE
1G+!PiF[1j8b6mBiYqG4I![EZK'rFji"Ab"55leDmdYV+9*,[$[MHa&2kj,XIH(K
90KkIa-Ep'I$!Tj5(&h&2b4cN`,G2pSf$$kqZ5Vi*m(hh+pHLCV(B#pqMEAp*2`L
K$S-ce482X[1!F4&mDd`jE#EL`-(e-DD6q,X(FCd12IXm1+#IdU#-2SFi1q)HB*d
54KI`ANVie'C`8jVJFZTNa%85A%ip'ebqP1"bkZr$jj-acJ0'8-Di!,i@'@-Q-2E
*q68KTiMXZ`ja[9RqCFj@hp%rG"RpQjINMlqNrpQ&-qA@"ki53rAP&2rr!!!0$3p
YGbpRBh4PFh3Z0MK,,VN!N""453#3%#pd!!"+8`#3"2q3"%e08&*0680$!3#V,jH
ZUc!jB!!!"M%!!"R%!!!"V3!!"E(*MaZS!*!'[VXM4!iL+Pj0j%)PIdhl9fbRBC!
!DR1(JAFp3hUJ2KNcZ@(k&LeHlIYc*cMM1X2GRCf"!*`N(81C&iAQNTm4&Ifii1"
EpGII4h6#PiP+'R-jb[e$&IeM12rA3hh-XBk+D2XK9#@U!P9e!@eRU22XRT!!%ar
%6jaP3[FjFKhiIjQ@hidE$&25cAm$`-IrIXai*1U*jZd88q%pXX1%F$M`RNJbAQS
ih%%N0J*@A""6p[pE#%1,cL9X%K8j[Z%i38$F)*'R%8!QpTQQT&06TCMf4amme9+
jii[1iC(HE43E%aa#QlrCjZ4[GSL(8*!!e8D-E"#r6LR@&GN3aF6F'028K*cdTGk
aT$fkUhhK6F,P(Tj11!CFTLJ+QQSXDINp,M$RL-+Cm9q6j"VK+Hr'rhrjXB16b1@
iec&AC&Z,)bAP)A[QZNkT`brFF9bj0@L(b*(4H3)$i*YCbh9`YK90aj%$0a!Gm&!
,de[B3!XlC'%$"-Eme,D0'(Z229-8DlB`9Q$FC!Y6@9L'KA%@PQm[")V0YM#PKBP
$[mI#m!L#i#MfjAH50i4eE512Q3bj@@90I4m!N!--!'XcXfpJlh2Ij$4lRaZHF-P
a`Tr-D)4&@%FjIAiV9hi5rZ3i@3NqRhV5`hI'm8m[3MNjENHi%AjN`!NMR"`rbB$
bTrc)FA,m$%r*F51Fm*03FTa`FTa`-Q#%%hlN'4R`Pa`RA(+FF+mMamRa)mq2m$2
#bB!#GjN8B'@Y6-+0iUpN*rl)-F)*2m)*8[#%!j-9H"9SN!!()1QkKK#+`Hm@K$S
HJ&m,rN[#E`hmIJLEJ,q0bk)PQTCS@&q4J@q@4d"9U,FU)md-(0Yrf-'kLSC3Ech
QTZ6PDfM!,6kXTJh48"8c3%-B$Af2ZR8CG9Ip2$-35k-p#&9[4Zd)$4`EE%%G46!
,R0"9-23T99CN34j4,-#2%@HJ4P(6T'aDQa#N[iMDX5G2a3J5j8hqU`G8AI)J-HU
[2pc+8DXTel3Q5K1DDDe`rC'MeMLS#5QV5"2QC-jFKV@(Y,XiDUf$'TI6Q941+fY
NIrEXmabeMLSdTZC&6Ae8m48krm8h(,@HFXdUSU`BRMk!q[lRHBlD3,RQ4#QENT@
#"cXRI2X+4ie6jif)dMfM+mkEUadrc9%E(G5'h+TKlGFqRHHS#3He,LFDrPe`h($
QCBlDa(3e*P+'jG["RP9riDM0,PI9V"`8d09SikJYP'YH1C5kHVfHlZ'SDkKIpI4
i+LIkaJ28)bpbe,88e9!N694cCG6ZNqFjkMUUN!"T6DE6ZT(h&AViKGmikRVU"NX
TAdR(H9q1FY4@bY@D,XL9SfF2rY6286HiPp,*+'9G,aJIFG50p#Uce14Gj3Y'd81
Ek"h5cFV&)blrQ+1f8B8b8UTJU&0#eN-9cVh+8GXGe*U-j!-kU)P6p4b9*UB'dj*
PCDb-E#IIrF$K4qBkCkfIRK)eFi@ZrFEXr4ae-h@$T1I(e%`C&K,!AUi3T&L#1U`
I'P&bCG3h(rRp#Fje+d8&50fBrKHeFp&j@4Q5M3GV$pea1eGSfk+(0$9pa80R1GF
ZCkfce*a5FDbGI1mKMRSpifUSq482fFRj!BlD6Id+#UPkaDr(MfcMU0YGVSSeRLY
8Z0V[F05H43q4)19lk0aM"lL(GMKViS"LkT1'T(MH+rPeTkZ3!*U"!([&H8FjkLl
+0@RS306mKfX[64ZJ+`31D"5@fGUaCaUiVRd8Y@!C+5NVP42Ef6h&a0E[S,D5e*Z
k$e*4k[,4R"1qUq@S0cKV-k$Hk86c@fiEqT2V*rYSlLHcfePEppip1YM9Hl2Del9
2!&`"@TQ,U#F1&[Z''jdelZ4b1(ZHmdimH"0(45eR)(&!*q9f)f6q6PCX0VTUBad
IAd$pf!@`[ik1Br'KUlR)+fakrN"cHF(H36)2h%jb&H(+NrX0&jMF9VMIj$*$&L)
T"p)0cLf`Yq1%"AXR6JQ`Yq'FKMf0GB,GdbRXPYLiZ+lq4#IBL8k`%jeJ*cV"6R5
#RHJ%1p%*GU)6l%3Rf)P1h%qc#+[@Y15RS-eL8qhT&"fJcd&k4dVkK,dC'pb'AVi
MRZjKXmB'HccD3(IrcJ8G(KYmfk)&p1R"5Hkrqa'fKQc`$Bdfm0&Ek'dF5*Cm&25
6E"T+qQc(16M5i"iI4FpKHCCb3p#-XSR6I3[1YF$(e@dVrAm(hAhGA,f#1a4fVQ`
D)a0bM1IcX19PNiJXd-QrQrjp$rTP0Nh4$ljDEE6C0*GdfSPEQNJ$[AaI"9dkQjE
)"&rjZ5PSlpQXL6c)65I42'&jkHi((6HE659pGY(F%GhJrk#CBp-AQC!!QcfG`RF
BE0C'2GbTm18(Qh@4"hI+cbI"'a-fkb-2I05,Qq*VI86`ZS90Dq6"IEUNPpZrZ6d
IkmP@hp@`f9$5UmK,"LjZ2dGjKIdd'pTRSrf,Re6[[[HdcbYXX0R3aK[KcVI)#mr
A-dm"R8jJFcLjAc2T0r!1Xr%Ph(NRKdhm"Y1PM9qd9#9(PFc#![X)[SNKr!e@jAm
!N!-0$3pYGbpRBh4PFh3Z8&"$,VN!N"!4c!#3%%+&!*!)rj!%68e38Ne33d-"!+X
[PkkV-$P&!!!'-3!!'Z!!!!'T!!!&bE5F%03!N!B"fL0%$L)UANhN3L9r6IYAE+G
KN!"UFiH"Gce$HU!q'61jBIV#iB$[cjhJM1X-GhH'!`%ib6Q'-Lm+c58r)bVkFF(
"YqU[[irS4$#9MENFjIkKL[iaR2rVS6lQ@%G&Y2d3UK*9JDUkJ,Bce(Pf6fJm&6R
b2Z8HRJiXa'A+ir""h#2TreqK*11PKX-G4'@dI[MrP@fl(cXiL9b1Haec4BbeKmP
aeJj"iNA$iL1d#Y1J+HR89#QQrG%86l98l[LLFhLNlhad)NaL2JK&0pZFr-d1m4!
+XYS)fcSm[diTeKAC%-A8h"M6e)5Fp+AHXD3p1ZNm1FY%rabj$[`E!$0bi`E$P26
rG@!p"$aQr-JXH*CjLX,-Um9UPGj1-5VH)fY@`*(4VHaDSf,&r6CPrlq&--R1K6X
*#r!9a`Q#"HZ@0$hdcLR&Z$Fm-LN%a%6I)NG'j`NF&EkCY9`(CaX9iFL4(fpK!IC
B8#c-*P,XP1dG-@D4KE%@0XR#9"C'PcdhhF,ZXE"3#eYVB3-&a[CDHNU"FB-@YXI
#PPJD!bcX5f0T(aH0)DaV'hR-C-M0+Q[Uq``!Da0l'f3fmMSr"jhCCQZ%N3NRNdf
14LJRP"rPR[a@3Sqr%8D1NjAJmk5Hp2#G-Ic6Le"1MJm)Pachb(2###I(6c*J%8k
j%8k1RiHRj,J46[K*+$P11$P11"P3`JNrmS`-q)!-Z'6!D6eKj2L4C`f-F$+J`(8
Q"D$m9QE4e,T1r"&qK,q%%k6J#3FQ+c!qS%%HJ+LU#N)S",rE%'S`i2Fjq"D$ha,
iI4qf+2P[K53BJQi)Q['&0I#IjBQL)Y4CP"42pjcUHm,'ZSf'8'HBF--Ck@qdLS0
b3K-d'HXH'L*+S#ZS9C93Dp(hThY##E32SH*'Y!@KRP2p0@MV!TJ"6QM*DZUi,'%
T+JeJ!r"$PM03TD!SBLUKM%E&Qd60d0-c)3Z*mVDqK3&9&I13!!6eTfr[iUM&P'Y
#%F4446G@Z(l(88YXe)LB`Z+S2TE@Pf(0!mTp(,A84Uf3!",*H&STD'4qmZcc(,@
-+M3XC`4&IJbl#Phql%Z1'UCF8eL3!,#@e`G3hrdd`e(,+GHd)+EL%XlQBDHLAlh
-85ZSm`B%mB'K&HG0PBjFj+L90QTjHXf`jUXI6h28L)eDPKBdpblBE[Mm*BjDaA6
94Z1DiGV"R*4rj+M9$PGCAcdSS+ZfQD2@8+iCI$4qqhSpdmj4DkPIeF4)2#fiaJ2
8Bbpbe(889F1L)XMT!QVVKFXFYBiUT"YMLB5UC9b&(RhKCikkRVV"`)8VDEQKZf-
V4kfRA)f*V,4kp-cqUedFGB0c+Hf-8Y$eQ[B"4pe)Vc*,6IQVI%eEm0!QHSG8IIA
L@5lrN!#MEUCQhhrr8(p,Ec3@kie#4,V"pIbK)a`9-T!!GBlk-`E@KJ84,f%LG'i
f[T!!!'KLUKNie$XiPM(N0&lQH[KU'dGYS"j+L['X*Sp(8hPGSl0R1'UMM9U5&&e
!'c8b%qDSN!"L,3rTKL6Ki3+b'A[l2CZI0G[Y06`a,LMk#PhcpFQ(1'S6pDZSCSE
PC!&fUR[r&Uj3-eASS(Td!+F,U1H1r2)8jpT#83&5e5EZS1kBGej+JZb9Kc82h(-
h9kKehN1+R,MPS8ZFDjZpPPPABF@aCZbG`abeRA(9j-b+KmcBG!p(lD"q"B9NGG@
[CimeFp5G$PGXM+5cUec0YcMUVRN2@9(2pG$Xii2F3jhf'KR%ZMUQL6M[[CaIGcX
+b8Q)f,HFGj+MGP'Z-8d&S[SrA2I32!5k3L5#cQ1CV4NkAXjer4pehS"JT*BMJmh
eq+jHMVUAFXdD@Pa-LB8NHQRI3K)PI3p-0D6jHqhb!-,0lkJIrAq#kpTYIkZh1S$
iJj!!%H0,"hSUqR8TjiTU6d$LH!3qd"l'QVp5(*Z0MQj%N5IR8$IK#2YVk#b4%AU
KAhRjVG*[D*cA0T*HB1mJp`hf9R+*B@mR9a,f0R*MBGp1mJVX655"`0j)XK,X1mL
pKlf"*+irG2*l,$B1E[#"6T2S$,#X@[56ejba+FlV&"bJcm2dMZ6dm6Xk0U4jAES
MHGhp&Sp0DH#"lZkGmrT#0Q@"!rVX)TRXhr[K0j4X`S%(2RS$[3RXDKCpj(@KE-T
cqZ`NL6E3i"kI4160319LE["D@$B9G'mQ#4Ai1,Ued1qGG(GeFr6blT!!hqqbU3a
-b$&jRrZ0-TY)B)&1lYedll[ACE1T#Rl`e9TlcUBkTp0ZdVF%-H4Z[lGR8a1Bi#X
h0hN["GM8"KlNTJYSfQ*jrHjlI6UE66PpZQMZ#'l`[pH@XGNEQ*!!Qr-kq@mqf+`
,HVK6rLX60R@""hI+c5IHHaBfk`-2I,5(G,jrpK(H5aSfpB%(pqQkANlrj[4mV#G
EHm2$CN01V`9H%R"aqMR+bhpj`iDqe%&p8bAIR!qTj%[4$kpFY(MK'lcmYcPXk&Z
H1lcmlTi0lIT[mPVbJIFUL!elGjRM4BM8c8"+#$@"@kr%qK5GrJGH8d5JeDSp%6Z
S`aY94TZmpLQ+$H(Nh"cl%r`RK-KrL#Vr!3#3!aq$!!!"!*!$!43!N!-8!*!$-Tr
lRLe!rr#`!,K[$#eZd!6rm2rdd"lm`FAKdkSV8FY+$deKBe"bEfTPBh4c,R0TG!)
!N!06594%8dP8)3#3"P0*9%46593K!*!BUc!jI3!!8M8!!!&'"1"2l'mDG@6JrHc
K@5U#NI*HN@GK!Z"2kQ`FG&2UN!"S!!,L@5[48(adA`CdC!EJ6qj[8hJS!!EJEHl
LEe5!)D$!FJC1ANl!*IrX51FI-#D`jL63G!*&0K!+1Li!&Ri!)VX-S"lbUKQJ(Z`
3!+SDI!$!#3ZT8,aIE!!!Q$!'8!6"aG!!N!-3!#X!"3%B!J#3"`-!N!-"!*!$!43
!N!-8!*!$-J$j(l!@#J#3!a`!-J!!8f9dC`#3!`S!!2rr!*!&q@G%'@B:
+91
View File
@@ -0,0 +1,91 @@
/*
MacOS_Test_config.h
Configuration flags for Macintosh development systems.
Test version.
<Revision History>
11/16/95 pcb Updated compilation flags to reflect latest 4.6 Makefile.
by Patrick C. Beard.
*/
/* Boehm, November 17, 1995 12:05 pm PST */
#ifdef __MWERKS__
// for CodeWarrior Pro with Metrowerks Standard Library (MSL).
// #define MSL_USE_PRECOMPILED_HEADERS 0
#include <ansi_prefix.mac.h>
#ifndef __STDC__
#define __STDC__ 0
#endif
#endif
// these are defined again in gc_priv.h.
#undef TRUE
#undef FALSE
#define ALL_INTERIOR_POINTERS // follows interior pointers.
//#define SILENT // want collection messages.
//#define DONT_ADD_BYTE_AT_END // no padding.
//#define SMALL_CONFIG // whether to a smaller heap.
#define NO_SIGNALS // signals aren't real on the Macintosh.
#define USE_TEMPORARY_MEMORY // use Macintosh temporary memory.
// CFLAGS= -O -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DSILENT
//
//LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \
// -DREDIRECT_MALLOC=GC_malloc_uncollectable \
// -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS
// Flags for building libgc.a -- the last two are required.
//
// Setjmp_test may yield overly optimistic results when compiled
// without optimization.
// -DSILENT disables statistics printing, and improves performance.
// -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
// altered stubborn objects, at substantial performance cost.
// Use only for incremental collector debugging.
// -DFIND_LEAK causes the collector to assume that all inaccessible
// objects should have been explicitly deallocated, and reports exceptions.
// Finalization and the test program are not usable in this mode.
// -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
// (Clients should also define SOLARIS_THREADS and then include
// gc.h before performing thr_ or GC_ operations.)
// This is broken on nonSPARC machines.
// -DALL_INTERIOR_POINTERS allows all pointers to the interior
// of objects to be recognized. (See gc_priv.h for consequences.)
// -DSMALL_CONFIG tries to tune the collector for small heap sizes,
// usually causing it to use less space in such situations.
// Incremental collection no longer works in this case.
// -DLARGE_CONFIG tunes the collector for unusually large heaps.
// Necessary for heaps larger than about 500 MB on most machines.
// Recommended for heaps larger than about 64 MB.
// -DDONT_ADD_BYTE_AT_END is meaningful only with
// -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
// causes all objects to be padded so that pointers just past the end of
// an object can be recognized. This can be expensive. (The padding
// is normally more than one byte due to alignment constraints.)
// -DDONT_ADD_BYTE_AT_END disables the padding.
// -DNO_SIGNALS does not disable signals during critical parts of
// the GC process. This is no less correct than many malloc
// implementations, and it sometimes has a significant performance
// impact. However, it is dangerous for many not-quite-ANSI C
// programs that call things like printf in asynchronous signal handlers.
// -DGC_OPERATOR_NEW_ARRAY declares that the C++ compiler supports the
// new syntax "operator new[]" for allocating and deleting arrays.
// See gc_cpp.h for details. No effect on the C part of the collector.
// This is defined implicitly in a few environments.
// -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
// as aliases for X, GC_realloc, and GC_free, respectively.
// Calloc is redefined in terms of the new malloc. X should
// be either GC_malloc or GC_malloc_uncollectable.
// The former is occasionally useful for working around leaks in code
// you don't want to (or can't) look at. It may not work for
// existing code, but it often does. Neither works on all platforms,
// since some ports use malloc or calloc to obtain system memory.
// (Probably works for UNIX, and win32.)
// -DNO_DEBUG removes GC_dump and the debugging routines it calls.
// Reduces code size slightly at the expense of debuggability.
+89
View File
@@ -0,0 +1,89 @@
/*
MacOS_config.h
Configuration flags for Macintosh development systems.
<Revision History>
11/16/95 pcb Updated compilation flags to reflect latest 4.6 Makefile.
by Patrick C. Beard.
*/
/* Boehm, November 17, 1995 12:10 pm PST */
#ifdef __MWERKS__
// for CodeWarrior Pro with Metrowerks Standard Library (MSL).
// #define MSL_USE_PRECOMPILED_HEADERS 0
#include <ansi_prefix.mac.h>
#ifndef __STDC__
#define __STDC__ 0
#endif
#endif /* __MWERKS__ */
// these are defined again in gc_priv.h.
#undef TRUE
#undef FALSE
#define ALL_INTERIOR_POINTERS // follows interior pointers.
#define SILENT // no collection messages.
//#define DONT_ADD_BYTE_AT_END // no padding.
//#define SMALL_CONFIG // whether to use a smaller heap.
#define NO_SIGNALS // signals aren't real on the Macintosh.
#define USE_TEMPORARY_MEMORY // use Macintosh temporary memory.
// CFLAGS= -O -DNO_SIGNALS -DSILENT -DALL_INTERIOR_POINTERS
//
//LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \
// -DREDIRECT_MALLOC=GC_malloc_uncollectable \
// -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS
// Flags for building libgc.a -- the last two are required.
//
// Setjmp_test may yield overly optimistic results when compiled
// without optimization.
// -DSILENT disables statistics printing, and improves performance.
// -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
// altered stubborn objects, at substantial performance cost.
// Use only for incremental collector debugging.
// -DFIND_LEAK causes the collector to assume that all inaccessible
// objects should have been explicitly deallocated, and reports exceptions.
// Finalization and the test program are not usable in this mode.
// -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
// (Clients should also define SOLARIS_THREADS and then include
// gc.h before performing thr_ or GC_ operations.)
// This is broken on nonSPARC machines.
// -DALL_INTERIOR_POINTERS allows all pointers to the interior
// of objects to be recognized. (See gc_priv.h for consequences.)
// -DSMALL_CONFIG tries to tune the collector for small heap sizes,
// usually causing it to use less space in such situations.
// Incremental collection no longer works in this case.
// -DLARGE_CONFIG tunes the collector for unusually large heaps.
// Necessary for heaps larger than about 500 MB on most machines.
// Recommended for heaps larger than about 64 MB.
// -DDONT_ADD_BYTE_AT_END is meaningful only with
// -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
// causes all objects to be padded so that pointers just past the end of
// an object can be recognized. This can be expensive. (The padding
// is normally more than one byte due to alignment constraints.)
// -DDONT_ADD_BYTE_AT_END disables the padding.
// -DNO_SIGNALS does not disable signals during critical parts of
// the GC process. This is no less correct than many malloc
// implementations, and it sometimes has a significant performance
// impact. However, it is dangerous for many not-quite-ANSI C
// programs that call things like printf in asynchronous signal handlers.
// -DGC_OPERATOR_NEW_ARRAY declares that the C++ compiler supports the
// new syntax "operator new[]" for allocating and deleting arrays.
// See gc_cpp.h for details. No effect on the C part of the collector.
// This is defined implicitly in a few environments.
// -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
// as aliases for X, GC_realloc, and GC_free, respectively.
// Calloc is redefined in terms of the new malloc. X should
// be either GC_malloc or GC_malloc_uncollectable.
// The former is occasionally useful for working around leaks in code
// you don't want to (or can't) look at. It may not work for
// existing code, but it often does. Neither works on all platforms,
// since some ports use malloc or calloc to obtain system memory.
// (Probably works for UNIX, and win32.)
// -DNO_DEBUG removes GC_dump and the debugging routines it calls.
// Reduces code size slightly at the expense of debuggability.
+9
View File
@@ -0,0 +1,9 @@
/*
dataend.c
A hack to get the extent of global data for the Macintosh.
by Patrick C. Beard.
*/
long __dataend;
+9
View File
@@ -0,0 +1,9 @@
/*
datastart.c
A hack to get the extent of global data for the Macintosh.
by Patrick C. Beard.
*/
long __datastart;
+107
View File
@@ -0,0 +1,107 @@
#-----------------------------------------------------------------------------#
# Makefile.DLLs, version 0.4.
# Contributed by Fergus Henderson.
# This Makefile contains rules for creating DLLs on Windows using gnu-win32.
#-----------------------------------------------------------------------------#
# This rule creates a `.def' file, which lists the symbols that are exported
# from the DLL. We use `nm' to get a list of all the exported text (`T')
# symbols and data symbols -- including uninitialized data (`B'),
# initialized data (`D'), read-only data (`R'), and common blocks (`C').
%.def: %.a
echo EXPORTS > $@
nm $< | grep '^........ [BCDRT] _' | sed 's/[^_]*_//' >> $@
# We need to use macros to access global data:
# the user of the DLL must refer to `foo' as `(*__imp_foo)'.
# This rule creates a `_globals.h' file, which contains macros
# for doing this.
SYM_PREFIX = $(firstword $(SYM_PREFIX-$*) $*)
DLL_MACRO = $(SYM_PREFIX)_USE_DLL
IMP_MACRO = $(SYM_PREFIX)_IMP
GLOBAL_MACRO = $(SYM_PREFIX)_GLOBAL
%_globals.h: %.a
echo "/* automatically generated by Makefile.DLLs */" > $@
echo "#if defined(__GNUC__) && defined(_WIN32) \\" >> $@
echo " && defined($(DLL_MACRO))" >> $@
echo "# define $(IMP_MACRO)(name) __imp_##name" >> $@
echo "# define $(GLOBAL_MACRO)(name) (*$(IMP_MACRO)(name))" >> $@
echo "#else" >> $@
echo "# define $(GLOBAL_MACRO)(name) name" >> $@
echo "#endif" >> $@
echo "" >> $@
for sym in `nm $< | grep '^........ [BCDR] _' | sed 's/[^_]*_//'`; do \
echo "#define $$sym $(GLOBAL_MACRO)($$sym)" >> $@; \
done
# This rule creates the export object file (`foo.exp') which contains the
# jump table array; this export object file becomes part of the DLL.
# This rule also creates the import library (`foo_dll.a') which contains small
# stubs for all the functions exported by the DLL which jump to them via the
# jump table. Executables that will use the DLL must be linked against this
# stub library.
%.exp %_dll.a : %.def
dlltool $(DLLTOOLFLAGS) $(DLLTOOLFLAGS-$*) \
--def $< \
--dllname $*.dll \
--output-exp $*.exp \
--output-lib $*_dll.a
# The `sed' commands below are to convert DOS-style `C:\foo\bar'
# pathnames into Unix-style `//c/foo/bar' pathnames.
CYGWIN32_LIBS = $(shell echo \
-L`dirname \`gcc -print-file-name=libgcc.a | \
sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-L`dirname \`gcc -print-file-name=libcygwin.a | \
sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-L`dirname \`gcc -print-file-name=libkernel32.a | \
sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-lgcc -lcygwin -lkernel32 -lgcc)
RELOCATABLE=yes
ifeq "$(strip $(RELOCATABLE))" "yes"
# to create relocatable DLLs, we need to do two passes
%.dll: %.exp %.a dll_fixup.o dll_init.o
$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll -o $*.base \
-e _dll_entry@12 dll_init.o \
dll_fixup.o $*.exp $*.a \
$(LDLIBS) $(LDLIBS-$*) \
$(CYGWIN32_LIBS)
$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll --base-file $*.base -o $@ \
-e _dll_entry@12 dll_init.o \
dll_fixup.o $*.exp $*.a \
$(LDLIBS) $(LDLIBS-$*) \
$(CYGWIN32_LIBS)
rm -f $*.base
else
%.dll: %.exp %.a dll_fixup.o dll_init.o
$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll -o $@ \
-e _dll_entry@12 dll_init.o \
dll_fixup.o $*.exp $*.a \
$(LDLIBS) $(LDLIBS-$*) \
$(CYGWIN32_LIBS)
endif
# This black magic piece of assembler needs to be linked in in order to
# properly terminate the list of imported DLLs.
dll_fixup.s:
echo '.section .idata$$3' > dll_fixup.s
echo '.long 0,0,0,0, 0,0,0,0' >> dll_fixup.s
# This bit is necessary to provide an initialization function for the DLL.
dll_init.c:
echo '__attribute__((stdcall))' > dll_init.c
echo 'int dll_entry(int handle, int reason, void *ptr)' >> dll_init.c
echo '{return 1; }' >> dll_init.c
dont_throw_away: dll_fixup.o dll_init.o
+190
View File
@@ -0,0 +1,190 @@
# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
#
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
#
# Permission is hereby granted to use or copy this program
# for any purpose, provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.
#
# Original author: Tom Tromey
# Severely truncated by Hans-J. Boehm
## Process this file with automake to produce Makefile.in.
## FIXME: `make dist' in this directory will not currently work. Many
## files that should be in the distribution are not mentioned in this
## Makefile.am.
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = m4 include doc
AM_CPPFLAGS = -I$(top_builddir)/.. -I$(top_srcdir)/..
#
# libtool is not capable of creating shared/static versions of a convenience
# library, so we have to do it ourselves
#
noinst_LTLIBRARIES = libmonogc.la libmonogc-static.la
EXTRA_DIST =
## more items will be succesively added below
if POWERPC_DARWIN
asm_libgc_sources = powerpc_darwin_mach_dep.s
endif
if TARGET_IA64
asm_libgc_sources = ia64_save_regs_in_stack.s
endif
libmonogc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c \
malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \
obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c \
backgraph.c win32_threads.c \
pthread_support.c pthread_stop_world.c darwin_stop_world.c \
mach_dep.c $(asm_libgc_sources)
# Include THREADDLLIBS here to ensure that the correct versions of
# linuxthread semaphore functions get linked:
libmonogc_la_LIBADD = $(THREADDLLIBS) $(UNWINDLIBS)
libmonogc_la_DEPENDENCIES =
libmonogc_la_LDFLAGS = -version-info 1:2:0
EXTRA_libmonogc_la_SOURCES = alpha_mach_dep.S \
mips_sgi_mach_dep.s mips_ultrix_mach_dep.s powerpc_darwin_mach_dep.s \
rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \
sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s
libmonogc_static_la_SOURCES = $(libmonogc_la_SOURCES)
libmonogc_static_la_LIBADD = $(libmonogc_la_LIBADD)
libmonogc_static_la_LDFLAGS = -static
EXTRA_DIST += alpha_mach_dep.S mips_sgi_mach_dep.s sparc_mach_dep.S
AM_CFLAGS = $(WERROR_CFLAGS) @GC_CFLAGS@
if CPLUSPLUS
extra_checks = test_cpp
else
extra_checks =
endif
#check_PROGRAMS = gctest $(extra_checks)
#test.o: $(srcdir)/tests/test.c
# $(COMPILE) -c $(srcdir)/tests/test.c
# Using $< in the above seems to fail with the HP/UX on Itanium make.
#test_cpp.o: $(srcdir)/tests/test_cpp.cc
# $(CXXCOMPILE) -c $(srcdir)/tests/test_cpp.cc
## FIXME: this is probably the reason why some files from BUILT_SOURCES
## are included in the distribution
# gctest_OBJECTS = test.o
#gctest_SOURCES = tests/test.c
#gctest_LDADD = ./libgc.la $(THREADDLLIBS) $(UNWINDLIBS) $(EXTRA_TEST_LIBS)
#test_cpp_SOURCES = tests/test_cpp.cc
#test_cpp_LDADD = ./libgc.la ./libgccpp.la $(THREADDLLIBS) $(UNWINDLIBS) $(EXTRA_TEST_LIBS)
#TESTS = gctest $(extra_checks)
## FIXME: relies on internal code generated by automake.
all_objs = $(libgc_la_OBJECTS)
$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
include/private/gc_hdrs.h include/gc.h include/gc_gcj.h include/gc_mark.h
## FIXME: we shouldn't have to do this, but automake forces us to.
if COMPILER_XLC
## XLC neither requires nor tolerates the unnecessary assembler goop
ASM_CPP_OPTIONS =
else
## We use -Wp,-P to strip #line directives. Irix `as' chokes on
## these.
ASM_CPP_OPTIONS = -Wp,-P -x assembler-with-cpp
endif
.s.lo:
## We use -Wp,-P to strip #line directives. Irix `as' chokes on
## these.
$(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $<
## We have our own definition of LTCOMPILE because we want to use our
## CFLAGS, not those passed in from the top level make.
LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \
-I$(top_srcdir)/include $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS)
LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
"AR_FLAGS=$(AR_FLAGS)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CFLAGS=$(CFLAGS)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"AR=$(AR)" \
"AS=$(AS)" \
"CC=$(CC)" \
"CXX=$(CXX)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"NM=$(NM)" \
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"DESTDIR=$(DESTDIR)"
MAKEOVERRIDES=
# files used by makefiles other than Makefile.am
#
EXTRA_DIST += add_gc_prefix.c gcname.c if_mach.c if_not_there.c hpux_test_and_clear.s pc_excludes gc.mak MacOS.c MacProjects.sit.hqx mach_dep.c setjmp_t.c threadlibs.c AmigaOS.c version.h Mac_files/datastart.c Mac_files/dataend.c Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h
# cord package
#
EXTRA_DIST += cord cord/cordbscs.c cord/cordtest.c cord/de.c cord/de_win.c cord/de_win.ICO cord/cordprnt.c cord/cordxtra.c cord/de_cmds.h cord/de_win.h cord/de_win.RC
# this is an auxiliary shell file used by Makefile and Makefile.direct
#
CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
# :FIXME: why do we distribute this one???
#
EXTRA_DIST += configure.host
#
# :GOTCHA: GNU make rule for making .s out of .S is flawed,
# it will not remove dest if building fails
.S.s:
if $(CPP) $< >$@ ; then :; else rm -f $@; fi
test:
test-bundle:
+685
View File
@@ -0,0 +1,685 @@
# This is the original manually generated Makefile. It may still be used
# to build the collector.
#
# Primary targets:
# gc.a - builds basic library
# c++ - adds C++ interface to library
# cords - adds cords (heavyweight strings) to library
# test - prints porting information, then builds basic version of gc.a,
# and runs some tests of collector and cords. Does not add cords or
# c++ interface to gc.a
# cord/de - builds dumb editor based on cords.
ABI_FLAG=
# ABI_FLAG should be the cc flag that specifies the ABI. On most
# platforms this will be the empty string. Possible values:
# +DD64 for 64-bit executable on HP/UX.
# -n32, -n64, -o32 for SGI/MIPS ABIs.
AS_ABI_FLAG=$(ABI_FLAG)
# ABI flag for assembler. On HP/UX this is +A64 for 64 bit
# executables.
CC=cc $(ABI_FLAG)
CXX=g++ $(ABI_FLAG)
AS=as $(AS_ABI_FLAG)
# The above doesn't work with gas, which doesn't run cpp.
# Define AS as `gcc -c -x assembler-with-cpp' instead.
# Redefining srcdir allows object code for the nonPCR version of the collector
# to be generated in different directories.
srcdir= .
VPATH= $(srcdir)
CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
# To build the parallel collector on Linux, add to the above:
# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
# To build the parallel collector in a static library on HP/UX,
# add to the above:
# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
# To build the thread-safe collector on Tru64, add to the above:
# -pthread -DGC_OSF1_THREADS
# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
# part of the build process, i.e. on the build machine. These will usually
# be the same as CC and CFLAGS, except in a cross-compilation environment.
# Note that HOSTCFLAGS should include any -D flags that affect thread support.
HOSTCC=$(CC)
HOSTCFLAGS=$(CFLAGS)
# For dynamic library builds, it may be necessary to add flags to generate
# PIC code, e.g. -fPIC on Linux.
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
# These define arguments influence the collector configuration:
# -DSILENT disables statistics printing, and improves performance.
# -DFIND_LEAK causes GC_find_leak to be initially set.
# This causes the collector to assume that all inaccessible
# objects should have been explicitly deallocated, and reports exceptions.
# Finalization and the test program are not usable in this mode.
# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
# (Clients should also define GC_SOLARIS_THREADS and then include
# gc.h before performing thr_ or dl* or GC_ operations.)
# Must also define -D_REENTRANT.
# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
# (Internally this define GC_SOLARIS_THREADS as well.)
# -DGC_IRIX_THREADS enables support for Irix pthreads. See README.irix.
# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
# Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
# see README.linux. -D_REENTRANT may also be required.
# -DGC_OSF1_THREADS enables support for Tru64 pthreads.
# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.
# Appeared to run into some underlying thread problems.
# -DGC_DARWIN_THREADS enables support for Mac OS X pthreads.
# -DGC_AIX_THREADS enables support for IBM AIX threads.
# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
# See README.DGUX386.
# -DGC_WIN32_THREADS enables support for win32 threads. That makes sense
# for this Makefile only under Cygwin.
# -DGC_THREADS should set the appropriate one of the above macros.
# It assumes pthreads for Solaris.
# -DALL_INTERIOR_POINTERS allows all pointers to the interior
# of objects to be recognized. (See gc_priv.h for consequences.)
# Alternatively, GC_all_interior_pointers can be set at process
# initialization time.
# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
# usually causing it to use less space in such situations.
# Incremental collection no longer works in this case.
# -DLARGE_CONFIG tunes the collector for unusually large heaps.
# Necessary for heaps larger than about 500 MB on most machines.
# Recommended for heaps larger than about 64 MB.
# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
# GC_all_interior_pointers = 1. Normally -DALL_INTERIOR_POINTERS
# causes all objects to be padded so that pointers just past the end of
# an object can be recognized. This can be expensive. (The padding
# is normally more than one byte due to alignment constraints.)
# -DDONT_ADD_BYTE_AT_END disables the padding.
# -DNO_SIGNALS does not disable signals during critical parts of
# the GC process. This is no less correct than many malloc
# implementations, and it sometimes has a significant performance
# impact. However, it is dangerous for many not-quite-ANSI C
# programs that call things like printf in asynchronous signal handlers.
# This is on by default. Turning it off has not been extensively tested with
# compilers that reorder stores. It should have been.
# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
# have execute permission, i.e. it may be impossible to execute
# code from the heap. Currently this only affects the incremental
# collector on UNIX machines. It may greatly improve its performance,
# since this may avoid some expensive cache synchronization.
# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
# the new syntax "operator new[]" for allocating and deleting arrays.
# See gc_cpp.h for details. No effect on the C part of the collector.
# This is defined implicitly in a few environments. Must also be defined
# by clients that use gc_cpp.h.
# -DREDIRECT_MALLOC=X causes malloc to be defined as alias for X.
# Unless the following macros are defined, realloc is also redirected
# to GC_realloc, and free is redirected to GC_free.
# Calloc and strdup are redefined in terms of the new malloc. X should
# be either GC_malloc or GC_malloc_uncollectable, or
# GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc
# with dummy source location information, but still results in
# properly remembered call stacks on Linux/X86 and Solaris/SPARC.
# It requires that the following two macros also be used.)
# The former is occasionally useful for working around leaks in code
# you don't want to (or can't) look at. It may not work for
# existing code, but it often does. Neither works on all platforms,
# since some ports use malloc or calloc to obtain system memory.
# (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL,
# you should only use GC_debug_malloc_replacement as a malloc
# replacement.
# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
# The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
# together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
# generate leak reports with call stacks for both malloc and realloc.
# This also requires the following:
# -DREDIRECT_FREE=X causes free to be redirected to X. The
# canonical use is -DREDIRECT_FREE=GC_debug_free.
# -DIGNORE_FREE turns calls to free into a noop. Only useful with
# -DREDIRECT_MALLOC.
# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
# Reduces code size slightly at the expense of debuggability.
# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
# order by specifying a nonstandard finalization mark procedure (see
# finalize.c). Objects reachable from finalizable objects will be marked
# in a sepearte postpass, and hence their memory won't be reclaimed.
# Not recommended unless you are implementing a language that specifies
# these semantics. Since 5.0, determines only only the initial value
# of GC_java_finalization variable.
# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
# to explicit GC_invoke_finalizers() calls.
# In 5.0 this became runtime adjustable, and this only determines the
# initial value of GC_finalize_on_demand.
# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
# This is useful if either the vendor malloc implementation is poor,
# or if REDIRECT_MALLOC is used.
# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
# sets the heap block size. Each heap block is devoted to a single size and
# kind of object. For the incremental collector it makes sense to match
# the most likely page size. Otherwise large values result in more
# fragmentation, but generally better performance for large heaps.
# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
# Works for Solaris and Irix.
# -DUSE_MUNMAP causes memory to be returned to the OS under the right
# circumstances. This currently disables VM-based incremental collection.
# This is currently experimental, and works only under some Unix,
# Linux and Windows versions.
# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
# GC_scratch_alloc() to get stack memory.
# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
# the garbage collector detects a value that looks almost, but not quite,
# like a pointer, print both the address containing the value, and the
# value of the near-bogus-pointer. Can be used to identifiy regions of
# memory that are likely to contribute misidentified pointers.
# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
# for objects allocated with the debugging allocator. If all objects
# through GC_MALLOC with GC_DEBUG defined, this allows the client
# to determine how particular or randomly chosen objects are reachable
# for debugging/profiling purposes. The gc_backptr.h interface is
# implemented only if this is defined.
# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
# this facility is only used in a few places. It is intended primarily
# for debugging of the garbage collector itself, but could also
# -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
# the reliability (from 99.9999% to 100% mod. bugs) of some of the debugging
# code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
# Assumes that all client allocation is done through debugging
# allocators.
# -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
# the headers to minimize object size, at the expense of checking for
# writes past the end of an object. This is intended for environments
# in which most client code is written in a "safe" language, such as
# Scheme or Java. Assumes that all client allocation is done using
# the GC_debug_ functions, or through the macros that expand to these,
# or by redirecting malloc to GC_debug_malloc_replacement.
# (Also eliminates the field for the requested object size.)
# occasionally be useful for debugging of client code. Slows down the
# collector somewhat, but not drastically.
# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
# allocated through the debugging interface. Affects the amount of
# information generated in leak reports. Only matters on platforms
# on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
# and Solaris/SPARC and platforms that provide execinfo.h.
# Default is zero. On X86, client
# code should NOT be compiled with -fomit-frame-pointer.
# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
# saved with each call frame. Default is zero. Ignored if we
# don't know how to retrieve arguments on the platform.
# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
# altered stubborn objects, at substantial performance cost.
# Use only for debugging of the incremental collector.
# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
# that include a pointer to a type descriptor in each allocated object).
# Building this way requires an ANSI C compiler.
# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
# prefetch instructions. No effect except on X86 Linux platforms.
# Assumes a very recent gcc-compatible compiler and assembler.
# (Gas prefetcht0 support was added around May 1999.)
# Empirically the code appears to still run correctly on Pentium II
# processors, though with no performance benefit. May not run on other
# X86 processors? In some cases this improves performance by
# 15% or so.
# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
# prefetch instructions. Same restrictions as USE_I686_PREFETCH.
# Minimally tested. Didn't appear to be an obvious win on a K6-2/500.
# -DUSE_PPC_PREFETCH causes the collector to issue PowerPC style
# prefetch instructions. No effect except on PowerPC OS X platforms.
# Performance impact untested.
# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
# causes the collector some system and pthread calls in a more transparent
# fashion than the usual macro-based approach. Requires GNU ld, and
# currently probably works only with Linux.
# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
# and GC_local_gcj_malloc(). Needed for gc_gcj.h interface. These allocate
# in a way that usually does not involve acquisition of a global lock.
# Currently works only on platforms such as Linux which use pthread_support.c.
# Recommended for multiprocessors.
# -DUSE_COMPILER_TLS causes thread local allocation to use compiler-supported
# "__thread" thread-local variables. This is the default in HP/UX. It
# may help performance on recent Linux installations. (It failed for
# me on RedHat 8, but appears to work on RedHat 9.)
# -DPARALLEL_MARK allows the marker to run in multiple threads. Recommended
# for multiprocessors. Currently requires Linux on X86 or IA64, though
# support for other Posix platforms should be fairly easy to add,
# if the thread implementation is otherwise supported.
# -DNO_GETENV prevents the collector from looking at environment variables.
# These may otherwise alter its configuration, or turn off GC altogether.
# I don't know of a reason to disable this, except possibly if the
# resulting process runs as a privileged user?
# -DUSE_GLOBAL_ALLOC. Win32 only. Use GlobalAlloc instead of
# VirtualAlloc to allocate the heap. May be needed to work around
# a Windows NT/2000 issue. Incompatible with USE_MUNMAP.
# See README.win32 for details.
# -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
# See README.environment for details. Experimental. Limited platform
# support. Implies DBG_HDRS_ALL. All allocation should be done using
# the debug interface.
# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
# makes incremental collection easier. Was enabled by default until 6.0.
# Rarely used, to my knowledge.
# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
# from a multithreaded parent. Currently only supported by pthread_support.c.
# (Similar code should work on Solaris or Irix, but it hasn't been tried.)
# -DTEST_WITH_SYSTEM_MALLOC causes gctest to allocate (and leak) large chunks
# of memory with the standard system malloc. This will cause the root
# set and collected heap to grow significantly if malloced memory is
# somehow getting traced by the collector. This has no impact on the
# generated library; it only affects the test.
# -DPOINTER_MASK=0x... causes candidate pointers to be ANDed with the
# given mask before being considered. If either this or the following
# macro is defined, it will be assumed that all pointers stored in
# the heap need to be processed this way. Stack and register pointers
# will be considered both with and without processing.
# These macros are normally needed only to support systems that use
# high-order pointer tags. EXPERIMENTAL.
# -DPOINTER_SHIFT=n causes the collector to left shift candidate pointers
# by the indicated amount before trying to interpret them. Applied
# after POINTER_MASK. EXPERIMENTAL. See also the preceding macro.
# -DDARWIN_DONT_PARSE_STACK Causes the Darwin port to discover thread
# stack bounds in the same way as other pthread ports, without trying to
# walk the frames onthe stack. This is recommended only as a fallback
# for applications that don't support proper stack unwinding.
#
CXXFLAGS= $(CFLAGS)
AR= ar
RANLIB= ranlib
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o pthread_support.o pthread_stop_world.o darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o win32_threads.o
CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c pthread_support.c pthread_stop_world.c darwin_stop_world.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c win32_threads.c
CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.S \
sparc_mach_dep.S include/gc.h include/gc_typed.h \
include/private/gc_hdrs.h include/private/gc_priv.h \
include/private/gcconfig.h include/private/gc_pmark.h \
include/gc_inl.h include/gc_inline.h include/gc_mark.h \
threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
gcname.c include/weakpointer.h include/private/gc_locks.h \
gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
include/new_gc_alloc.h include/gc_allocator.h \
include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
include/private/solaris_threads.h include/gc_backptr.h \
hpux_test_and_clear.s include/gc_gcj.h \
include/gc_local_alloc.h include/private/dbg_mlc.h \
include/private/specific.h powerpc_darwin_mach_dep.s \
include/leak_detector.h include/gc_amiga_redirects.h \
include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
include/gc_config_macros.h include/private/pthread_support.h \
include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
include/private/darwin_stop_world.h $(CORD_SRCS)
DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
doc/README.amiga doc/README.cords doc/debugging.html \
doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
doc/README.sgi doc/README.solaris2 doc/README.uts \
doc/README.win32 doc/barrett_diagram doc/README \
doc/README.contributors doc/README.changes doc/gc.man \
doc/README.environment doc/tree.html doc/gcdescr.html \
doc/README.autoconf doc/README.macros doc/README.ews4800 \
doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
doc/scale.html doc/gcinterface.html doc/README.darwin \
doc/simple_example.html
TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
tests/leak_test.c tests/thread_leak_test.c tests/middle.c
GNU_BUILD_FILES= configure.ac Makefile.am configure acinclude.m4 \
libtool.m4 install-sh configure.host Makefile.in \
aclocal.m4 config.sub config.guess \
include/Makefile.am include/Makefile.in \
doc/Makefile.am doc/Makefile.in \
ltmain.sh mkinstalldirs depcomp missing
OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
PCR-Makefile SMakefile.amiga Makefile.DLLs \
digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE
# Makefile and Makefile.direct are copies of each other.
OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
MacProjects.sit.hqx MacOS.c \
Mac_files/datastart.c Mac_files/dataend.c \
Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
add_gc_prefix.c gc_cpp.cpp \
version.h AmigaOS.c \
$(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
UTILS= if_mach if_not_there threadlibs
# Libraries needed for curses applications. Only needed for de.
CURSES= -lcurses -ltermlib
# The following is irrelevant on most systems. But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= /bin/sh
SPECIALCFLAGS = -I$(srcdir)/include
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
# Set SPECIALCFLAGS to -q nodirect_code on Encore.
all: gc.a gctest
LEAKFLAGS=$(CFLAGS) -DFIND_LEAK
BSD-pkg-all: bsd-libgc.a bsd-libleak.a
bsd-libgc.a:
$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
mv gc.a bsd-libgc.a
bsd-libleak.a:
$(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
mv gc.a bsd-libleak.a
BSD-pkg-install: BSD-pkg-all
${CP} bsd-libgc.a libgc.a
${INSTALL_DATA} libgc.a ${PREFIX}/lib
${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
mach_dep.o $(SRCS)
$(MAKE) -f PCR-Makefile depend
$(MAKE) -f PCR-Makefile
$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
$(srcdir)/include/private/gc_priv.h \
$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
$(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
$(srcdir)/include/gc_config_macros.h Makefile
# The dependency on Makefile is needed. Changing
# options such as -DSILENT affects the size of GC_arrays,
# invalidating all .o files that rely on gc_priv.h
mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
specific.o pthread_support.o: $(srcdir)/include/private/specific.h
solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
tests/test.o: tests $(srcdir)/tests/test.c
$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
mv test.o tests/test.o
tests:
mkdir tests
base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
echo > base_lib
rm -f dont_ar_1
./if_mach SPARC SUNOS5 touch dont_ar_1
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
./if_mach M68K AMIGA touch dont_ar_1
./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
cords: $(CORD_OBJS) cord/cordtest $(UTILS)
rm -f dont_ar_3
./if_mach SPARC SUNOS5 touch dont_ar_3
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
./if_mach M68K AMIGA touch dont_ar_3
./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
base_lib $(UTILS)
rm -f test_cpp
./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
c++-t: c++
./test_cpp 1
c++-nt: c++
@echo "Use ./test_cpp 1 to test the leak library"
c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
rm -f dont_ar_4
./if_mach SPARC SUNOS5 touch dont_ar_4
./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
./if_mach M68K AMIGA touch dont_ar_4
./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
./test_cpp 1
echo > c++
dyn_load_sunos53.o: dyn_load.c
$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
# SunOS5 shared library version of the collector
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
ln sunos5gc.so libgc.so
# Alpha/OSF shared library version of the collector
libalphagc.so: $(OBJS)
ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
ln libalphagc.so libgc.so
# IRIX shared library version of the collector
libirixgc.so: $(OBJS) dyn_load.o
ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
ln libirixgc.so libgc.so
# Linux shared library version of the collector
liblinuxgc.so: $(OBJS) dyn_load.o
gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
ln liblinuxgc.so libgc.so
# Alternative Linux rule. This is preferable, but is likely to break the
# Makefile for some non-linux platforms.
# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
#
#.SUFFIXES: .lo $(SUFFIXES)
#
#.c.lo:
# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
#
# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
# touch liblinuxgc.so
mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s \
$(srcdir)/mips_ultrix_mach_dep.s \
$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_darwin_mach_dep.s \
$(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
$(srcdir)/ia64_save_regs_in_stack.s \
$(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
rm -f mach_dep.o
./if_mach MIPS IRIX5 $(CC) -c -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach POWERPC DARWIN $(AS) -o mach_dep.o $(srcdir)/powerpc_darwin_mach_dep.s
./if_mach ALPHA LINUX $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S
./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
rm -f mark_rts.o
-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
# Work-around for DEC optimizer tail recursion elimination bug.
# The ALPHA-specific line should be removed if gcc is used.
alloc.o: version.h
cord:
mkdir cord
cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
mv cordbscs.o cord/cordbscs.o
# not all compilers understand -o filename
cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
mv cordxtra.o cord/cordxtra.o
cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
mv cordprnt.o cord/cordprnt.o
cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
rm -f cord/cordtest
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
rm -f cord/de
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
if_not_there: $(srcdir)/if_not_there.c
$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
clean:
rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
threadlibs $(CORD_OBJS) cord/cordtest cord/de
-rm -f *~
gctest: tests/test.o gc.a $(UTILS)
rm -f gctest
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken. Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
test: KandRtest cord/cordtest
cord/cordtest
# Those tests that work even with a K&R C compiler:
KandRtest: setjmp_test gctest
./setjmp_test
./gctest
add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
$(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
gcname: $(srcdir)/gcname.c $(srcdir)/version.h
$(CC) -o gcname $(srcdir)/gcname.c
gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
cp Makefile Makefile.old
cp Makefile.direct Makefile
rm -f `./gcname`
ln -s . `./gcname`
./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
tar cvfh gc.tar `cat /tmp/gc.tar-files`
cp gc.tar `./gcname`.tar
gzip `./gcname`.tar
rm `./gcname`
pc_gc.tar: $(SRCS) $(OTHER_FILES)
tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
floppy: pc_gc.tar
-mmd a:/cord
-mmd a:/cord/private
-mmd a:/include
-mmd a:/include/private
mkdir /tmp/pc_gc
cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
-mcopy -tmn /tmp/pc_gc/* a:
-mcopy -tmn /tmp/pc_gc/cord/* a:/cord
-mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
-mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
-mcopy -tmn /tmp/pc_gc/include/* a:/include
-mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
rm -r /tmp/pc_gc
gc.tar.Z: gc.tar
compress gc.tar
gc.tar.gz: gc.tar
gzip gc.tar
lint: $(CSRCS) tests/test.c
lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
# BTL: added to test shared library version of collector.
# Currently works only under SunOS5. Requires GC_INIT call from statically
# loaded client code.
ABSDIR = `pwd`
gctest_dyn_link: tests/test.o libgc.so
$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
gctest_irix_dyn_link: tests/test.o libirixgc.so
$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
# The following appear to be dead, especially since libgc_globals.h
# is apparently lost.
test_dll.o: tests/test.c libgc_globals.h
$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
test_dll: test_dll.o libgc_dll.a libgc.dll
$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
SYM_PREFIX-libgc=GC
# Uncomment the following line to build a GNU win32 DLL
# include Makefile.DLLs
reserved_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/GC_/_GC_/g < $$file > tmp; \
cp tmp $$file; \
done
user_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/_GC_/GC_/g < $$file > tmp; \
cp tmp $$file; \
done
+430
View File
@@ -0,0 +1,430 @@
# This Makefile is intended only for DJGPP use.
# It is mainly a copy of the main Makefile, but tends to get out of sync
# with it. A merge would probably be appropriate.
# Primary targets:
# gc.a - builds basic library
# libgc.a - builds library for use with g++ "-fgc-keyword" extension
# -fgc-keyword was never really available. Historical
# interest only.
# c++ - adds C++ interface to library
# cords - adds cords (heavyweight strings) to library
# test - prints porting information, then builds basic version of gc.a,
# and runs some tests of collector and cords. Does not add cords or
# c++ interface to gc.a
# cord/de$(EXE_SUFFIX) - builds dumb editor based on cords.
ABI_FLAG=
CC=gcc $(ABI_FLAG)
CXX=gxx $(ABI_FLAG)
AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)
# The above doesn't work with gas, which doesn't run cpp.
# Define AS as `gcc -c -x assembler-with-cpp' instead.
# Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
# if you use something other than the default ABI on your machine.
# special defines for DJGPP
CXXLD=gxx $(ABI_FLAG)
EXE_SUFFIX=.exe
srcdir= .
VPATH= $(srcdir)
CFLAGS= -gstabs+ -O2 -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
# -DSILENT disables statistics printing, and improves performance.
# -DFIND_LEAK causes GC_find_leak to be initially set.
# This causes the collector to assume that all inaccessible
# objects should have been explicitly deallocated, and reports exceptions.
# Finalization and the test program are not usable in this mode.
# -DALL_INTERIOR_POINTERS allows all pointers to the interior
# of objects to be recognized. (See gc_priv.h for consequences.)
# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
# usually causing it to use less space in such situations.
# Incremental collection no longer works in this case.
# -DLARGE_CONFIG tunes the collector for unusually large heaps.
# Necessary for heaps larger than about 500 MB on most machines.
# Recommended for heaps larger than about 64 MB.
# -DDONT_ADD_BYTE_AT_END is meaningful only with
# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
# causes all objects to be padded so that pointers just past the end of
# an object can be recognized. This can be expensive. (The padding
# is normally more than one byte due to alignment constraints.)
# -DDONT_ADD_BYTE_AT_END disables the padding.
# -DNO_SIGNALS does not disable signals during critical parts of
# the GC process. This is no less correct than many malloc
# implementations, and it sometimes has a significant performance
# impact. However, it is dangerous for many not-quite-ANSI C
# programs that call things like printf in asynchronous signal handlers.
# This is on by default. Turning it off has not been extensively tested with
# compilers that reorder stores. It should have been.
# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
# have execute permission, i.e. it may be impossible to execute
# code from the heap. Currently this only affects the incremental
# collector on UNIX machines. It may greatly improve its performance,
# since this may avoid some expensive cache synchronization.
# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
# the new syntax "operator new[]" for allocating and deleting arrays.
# See gc_cpp.h for details. No effect on the C part of the collector.
# This is defined implicitly in a few environments. Must also be defined
# by clients that use gc_cpp.h.
# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
# as aliases for X, GC_realloc, and GC_free, respectively.
# Calloc is redefined in terms of the new malloc. X should
# be either GC_malloc or GC_malloc_uncollectable.
# The former is occasionally useful for working around leaks in code
# you don't want to (or can't) look at. It may not work for
# existing code, but it often does. Neither works on all platforms,
# since some ports use malloc or calloc to obtain system memory.
# (Probably works for UNIX, and win32.)
# -DIGNORE_FREE turns calls to free into a noop. Only useful with
# -DREDIRECT_MALLOC.
# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
# Reduces code size slightly at the expense of debuggability.
# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
# order by specifying a nonstandard finalization mark procedure (see
# finalize.c). Objects reachable from finalizable objects will be marked
# in a sepearte postpass, and hence their memory won't be reclaimed.
# Not recommended unless you are implementing a language that specifies
# these semantics. Since 5.0, determines only only the initial value
# of GC_java_finalization variable.
# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
# to explicit GC_invoke_finalizers() calls.
# In 5.0 this became runtime adjustable, and this only determines the
# initial value of GC_finalize_on_demand.
# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
# This is useful if either the vendor malloc implementation is poor,
# or if REDIRECT_MALLOC is used.
# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
# sets the heap block size. Each heap block is devoted to a single size and
# kind of object. For the incremental collector it makes sense to match
# the most likely page size. Otherwise large values result in more
# fragmentation, but generally better performance for large heaps.
# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
# the garbage collector detects a value that looks almost, but not quite,
# like a pointer, print both the address containing the value, and the
# value of the near-bogus-pointer. Can be used to identifiy regions of
# memory that are likely to contribute misidentified pointers.
# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
# for objects allocated with the debugging allocator. If all objects
# through GC_MALLOC with GC_DEBUG defined, this allows the client
# to determine how particular or randomly chosen objects are reachable
# for debugging/profiling purposes. The gc_backptr.h interface is
# implemented only if this is defined.
# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
# this facility is only used in a few places. It is intended primarily
# for debugging of the garbage collector itself, but could also
# -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
# the reliability (from 99.9999% to 100%) of some of the debugging
# code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
# Assumes that all client allocation is done through debugging
# allocators.
# -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
# the headers to minimize object size, at the expense of checking for
# writes past the end of an object. This is intended for environments
# in which most client code is written in a "safe" language, such as
# Scheme or Java. Assumes that all client allocation is done using
# the GC_debug_ functions (or through the macros that expand to these.
# (Also eliminates the field for the requested object size.)
# occasionally be useful for debugging of client code. Slows down the
# collector somewhat, but not drastically.
# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
# altered stubborn objects, at substantial performance cost.
# Use only for debugging of the incremental collector.
# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
# that include a pointer to a type descriptor in each allocated object).
# Building this way requires an ANSI C compiler.
# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
# prefetch instructions. No effect except on X86 Linux platforms.
# Assumes a very recent gcc-compatible compiler and assembler.
# (Gas prefetcht0 support was added around May 1999.)
# Empirically the code appears to still run correctly on Pentium II
# processors, though with no performance benefit. May not run on other
# X86 processors? In some cases this improves performance by
# 15% or so.
# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
# prefetch instructions. Same restrictions as USE_I686_PREFETCH.
# UNTESTED!!
# -DGC_USE_LD_WRAP in combination with the gld flags listed in README.linux
# causes the collector some system and pthread calls in a more transparent
# fashion than the usual macro-based approach. Requires GNU ld, and
# currently probably works only with Linux.
CXXFLAGS= $(CFLAGS) -DGC_OPERATOR_NEW_ARRAY
AR= ar
RANLIB= ranlib
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o
CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c
CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \
sparc_mach_dep.S include/gc.h include/gc_typed.h \
include/private/gc_hdrs.h include/private/gc_priv.h \
include/private/gcconfig.h include/private/gc_mark.h \
include/gc_inl.h include/gc_inline.h gc.man \
threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
include/weakpointer.h include/private/gc_locks.h \
gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
include/private/solaris_threads.h include/gc_backptr.h \
hpux_test_and_clear.s include/gc_gcj.h \
include/gc_local_alloc.h include/private/dbg_mlc.h \
include/private/specific.h powerpc_darwin_mach_dep.s \
include/leak_detector.h $(CORD_SRCS)
OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
README tests/test.c test_cpp.cc setjmp_t.c SMakefile.amiga \
SCoptions.amiga README.amiga README.win32 cord/README \
README.rs6000 README.QUICK callprocs pc_excludes \
barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \
MacOS.c EMX_MAKEFILE README.debugging \
Mac_files/datastart.c Mac_files/dataend.c \
Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \
win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \
README.alpha README.linux README.MacOSX version.h Makefile.DLLs \
WCC_MAKEFILE nursery.c include/gc_nursery.h include/gc_copy_descr.h
CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
UTILS= if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
# Libraries needed for curses applications. Only needed for de.
CURSES= -lcurses -ltermlib
# The following is irrelevant on most systems. But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= /bin/sh
SPECIALCFLAGS = -I$(srcdir)/include
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
# Set SPECIALCFLAGS to -q nodirect_code on Encore.
all: gc.a gctest$(EXE_SUFFIX)
$(OBJS) test.o dyn_load.o dyn_load_sunos53.o: \
$(srcdir)/include/private/gc_priv.h \
$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
$(srcdir)/include/gc.h \
$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
Makefile
# The dependency on Makefile is needed. Changing
# options such as -DSILENT affects the size of GC_arrays,
# invalidating all .o files that rely on gc_priv.h
mark.o typd_mlc.o finalize.o: $(srcdir)/include/gc_mark.h
base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
echo > base_lib
rm -f on_sparc_sunos5_1
./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o
-./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a
# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
cords: $(CORD_OBJS) cord/cordtest$(EXE_SUFFIX) $(UTILS)
rm -f on_sparc_sunos5_3
./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)
-./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
test_cpp$(EXE_SUFFIX): $(srcdir)/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
base_lib $(UTILS)
rm -f test_cpp test_cpp$(EXE_SUFFIX)
./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld
./if_not_there test_cpp$(EXE_SUFFIX) $(CXXLD) $(CXXFLAGS) -o test_cpp$(EXE_SUFFIX) $(srcdir)/test_cpp.cc gc_cpp.o gc.a
rm -f test_cpp
c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp$(EXE_SUFFIX)
rm -f on_sparc_sunos5_4
./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4
./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o
-./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a
./test_cpp$(EXE_SUFFIX) 1
echo > c++
dyn_load_sunos53.o: dyn_load.c
$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
# SunOS5 shared library version of the collector
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
ln sunos5gc.so libgc.so
# Alpha/OSF shared library version of the collector
libalphagc.so: $(OBJS)
ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
ln libalphagc.so libgc.so
# IRIX shared library version of the collector
libirixgc.so: $(OBJS) dyn_load.o
ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
ln libirixgc.so libgc.so
# Linux shared library version of the collector
liblinuxgc.so: $(OBJS) dyn_load.o
gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o -lo
ln liblinuxgc.so libgc.so
mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S $(srcdir)/mips_ultrix_mach_dep.s \
$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_darwin_mach_dep.s $(UTILS)
rm -f mach_dep.o
./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S
./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_darwin_mach_dep.s
./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.S
./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)
rm -f mark_rts.o
-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
# Work-around for DEC optimizer tail recursion elimination bug.
# The ALPHA-specific line should be removed if gcc is used.
alloc.o: version.h
cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
mv cordbscs.o cord/cordbscs.o
# not all compilers understand -o filename
cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
mv cordxtra.o cord/cordxtra.o
cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
mv cordprnt.o cord/cordprnt.o
cord/cordtest$(EXE_SUFFIX): $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) /tmp
rm -f cord/cordtest$(EXE_SUFFIX)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld
./if_not_there cord/cordtest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
rm -f cord/cordtest cordtest
-mv cordtest$(EXE_SUFFIX) cord/
/tmp: $(UTILS)
./if_not_there /tmp mkdir /tmp
cord/de$(EXE_SUFFIX): $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
rm -f cord/de cord/de$(EXE_SUFFIX)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld
./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
./if_not_there cord/de$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/de$(EXE_SUFFIX) $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES)
if_mach$(EXE_SUFFIX): $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
rm -f if_mach if_mach$(EXE_SUFFIX)
$(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c
threadlibs$(EXE_SUFFIX): $(srcdir)/threadlibs.c $(srcdir)include/private/gcconfig.h Makefile
rm -f threadlibs threadlibs$(EXE_SUFFIX)
$(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c
if_not_there$(EXE_SUFFIX): $(srcdir)/if_not_there.c
rm -f if_not_there if_not_there$(EXE_SUFFIX)
$(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c
# Clean removes *.o several times,
# because as the first one doesn't seem to get them all!
clean:
rm -f gc.a *.o
rm -f *.o
rm -f *.o
rm -f cord/*.o
rm -f gctest gctest_dyn_link test_cpp
rm -f setjmp_test mon.out gmon.out a.out core if_not_there if_mach
rm -f threadlibs $(CORD_OBJS) cordtest cord/cordtest de cord/de
rm -f gctest$(EXE_SUFFIX) gctest_dyn_link$(EXE_SUFFIX) test_cpp$(EXE_SUFFIX)
rm -f setjmp_test$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) if_mach$(EXE_SUFFIX)
rm -f threadlibs$(EXE_SUFFIX) cord/cordtest$(EXE_SUFFIX)
-rm -f *~
gctest$(EXE_SUFFIX): tests/test.o gc.a if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
rm -f gctest gctest$(EXE_SUFFIX)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld
./if_not_there gctest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o gctest$(EXE_SUFFIX) tests/test.o gc.a
rm -f gctest
# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken. Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test$(EXE_SUFFIX): $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h \
if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
rm -f setjmp_test$(EXE_SUFFIX)
$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
rm -f setjmp_test
test: KandRtest cord/cordtest$(EXE_SUFFIX)
./cord/cordtest$(EXE_SUFFIX)
# Those tests that work even with a K&R C compiler:
KandRtest: setjmp_test$(EXE_SUFFIX) gctest$(EXE_SUFFIX)
./setjmp_test$(EXE_SUFFIX)
./gctest$(EXE_SUFFIX)
add_gc_prefix$(EXE_SUFFIX): add_gc_prefix.c
$(CC) -o add_gc_prefix$(EXE_SUFFIX) $(srcdir)/add_gc_prefix.c
rm -f add_gc_prefix
gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix
./add_gc_prefix$(EXE_SUFFIX) $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files
(cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar
pc_gc.tar: $(SRCS) $(OTHER_FILES)
tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
gc.tar.Z: gc.tar
compress gc.tar
gc.tar.gz: gc.tar
gzip gc.tar
lint: $(CSRCS) tests/test.c
lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall"
# BTL: added to test shared library version of collector.
# Currently works only under SunOS5. Requires GC_INIT call from statically
# loaded client code.
ABSDIR = `pwd`
gctest_dyn_link: test.o libgc.so
$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread
test_dll.o: tests/test.c libgc_globals.h
$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
test_dll: test_dll.o libgc_dll.a libgc.dll
$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
SYM_PREFIX-libgc=GC
# Uncomment the following line to build a GNU win32 DLL
# include Makefile.DLLs
+60
View File
@@ -0,0 +1,60 @@
# Makefile for Windows NT. Assumes Microsoft compiler, and a single thread.
# DLLs are included in the root set under NT, but not under win32S.
# Use "nmake nodebug=1 all" for optimized versions of library, gctest and editor.
MY_CPU=X86
CPU=$(MY_CPU)
!include <ntwin32.mak>
OBJS= alloc.obj reclaim.obj allchblk.obj misc.obj mach_dep.obj os_dep.obj mark_rts.obj headers.obj mark.obj obj_map.obj blacklst.obj finalize.obj new_hblk.obj dbg_mlc.obj malloc.obj stubborn.obj dyn_load.obj typd_mlc.obj ptr_chck.obj gc_cpp.obj mallocx.obj
all: gctest.exe cord\de.exe test_cpp.exe
.c.obj:
$(cc) $(cdebug) $(cflags) $(cvars) -Iinclude -DSILENT -DALL_INTERIOR_POINTERS -D__STDC__ -DGC_NOT_DLL -DGC_BUILD $*.c /Fo$*.obj
.cpp.obj:
$(cc) $(cdebug) $(cflags) $(cvars) -Iinclude -DSILENT -DALL_INTERIOR_POINTERS -DGC_NOT_DLL -DGC_BUILD $*.CPP /Fo$*.obj
$(OBJS) tests\test.obj: include\private\gc_priv.h include\private\gc_hdrs.h include\gc.h include\private\gcconfig.h include\private\gc_locks.h include\private\gc_pmark.h include\gc_mark.h
gc.lib: $(OBJS)
lib /MACHINE:i386 /out:gc.lib $(OBJS)
# The original NT SDK used lib32 instead of lib
gctest.exe: tests\test.obj gc.lib
# The following works for win32 debugging. For win32s debugging use debugtype:coff
# and add mapsympe line.
# This produces a "GUI" applications that opens no windows and writes to the log file
# "gc.log". This is done to make the result runnable under win32s.
$(link) -debug:full -debugtype:cv $(guiflags) -stack:131072 -out:$*.exe tests\test.obj $(guilibs) gc.lib
# mapsympe -n -o gctest.sym gctest.exe
cord\de_win.rbj: cord\de_win.res
cvtres /MACHINE:$(MY_CPU) /OUT:cord\de_win.rbj cord\de_win.res
cord\de.obj cord\de_win.obj: include\cord.h include\private\cord_pos.h cord\de_win.h cord\de_cmds.h
cord\de_win.res: cord\de_win.rc cord\de_win.h cord\de_cmds.h
$(rc) $(rcvars) -r -fo cord\de_win.res $(cvars) cord\de_win.rc
# Cord/de is a real win32 gui application.
cord\de.exe: cord\cordbscs.obj cord\cordxtra.obj cord\de.obj cord\de_win.obj cord\de_win.rbj gc.lib
$(link) -debug:full -debugtype:cv $(guiflags) -stack:16384 -out:cord\de.exe cord\cordbscs.obj cord\cordxtra.obj cord\de.obj cord\de_win.obj cord\de_win.rbj gc.lib $(guilibs)
gc_cpp.obj: include\gc_cpp.h include\gc.h
gc_cpp.cpp: gc_cpp.cc
copy gc_cpp.cc gc_cpp.cpp
test_cpp.cpp: tests\test_cpp.cc
copy tests\test_cpp.cc test_cpp.cpp
# This generates the C++ test executable. The executable expects
# a single numeric argument, which is the number of iterations.
# The output appears in the file "gc.log".
test_cpp.exe: test_cpp.obj include\gc_cpp.h include\gc.h gc.lib
$(link) -debug:full -debugtype:cv $(guiflags) -stack:16384 -out:test_cpp.exe test_cpp.obj gc.lib $(guilibs)
+60
View File
@@ -0,0 +1,60 @@
# Makefile for Windows NT. Assumes Microsoft compiler.
# DLLs are included in the root set under NT, but not under win32S.
# Use "nmake nodebug=1 all" for optimized versions of library, gctest and editor.
MY_CPU=X86
CPU=$(MY_CPU)
!include <ntwin32.mak>
OBJS= alloc.obj reclaim.obj allchblk.obj misc.obj mach_dep.obj os_dep.obj mark_rts.obj headers.obj mark.obj obj_map.obj blacklst.obj finalize.obj new_hblk.obj dbg_mlc.obj malloc.obj stubborn.obj dyn_load.obj typd_mlc.obj ptr_chck.obj gc_cpp.obj mallocx.obj win32_threads.obj
all: gctest.exe cord\de.exe test_cpp.exe
.c.obj:
$(cc) $(cdebug) $(cflags) $(cvars) -Iinclude -DSILENT -DALL_INTERIOR_POINTERS -D__STDC__ -DGC_NOT_DLL -DGC_WIN32_THREADS $*.c /Fo$*.obj
.cpp.obj:
$(cc) $(cdebug) $(cflags) $(cvars) -Iinclude -DSILENT -DALL_INTERIOR_POINTERS -DGC_NOT_DLL $*.CPP -DGC_WIN32_THREADS /Fo$*.obj
$(OBJS) tests\test.obj: include\private\gc_priv.h include\private\gc_hdrs.h include\gc.h include\private\gcconfig.h include\private\gc_locks.h include\private\gc_pmark.h include\gc_mark.h
gc.lib: $(OBJS)
lib /MACHINE:i386 /out:gc.lib $(OBJS)
# The original NT SDK used lib32 instead of lib
gctest.exe: tests\test.obj gc.lib
# The following works for win32 debugging. For win32s debugging use debugtype:coff
# and add mapsympe line.
# This produces a "GUI" applications that opens no windows and writes to the log file
# "gc.log". This is done to make the result runnable under win32s.
$(link) -debug:full -debugtype:cv $(guiflags) -stack:131072 -out:$*.exe tests\test.obj $(guilibs) gc.lib
# mapsympe -n -o gctest.sym gctest.exe
cord\de_win.rbj: cord\de_win.res
cvtres /MACHINE:$(MY_CPU) /OUT:cord\de_win.rbj cord\de_win.res
cord\de.obj cord\de_win.obj: include\cord.h include\private\cord_pos.h cord\de_win.h cord\de_cmds.h
cord\de_win.res: cord\de_win.rc cord\de_win.h cord\de_cmds.h
$(rc) $(rcvars) -r -fo cord\de_win.res $(cvars) cord\de_win.rc
# Cord/de is a real win32 gui application.
cord\de.exe: cord\cordbscs.obj cord\cordxtra.obj cord\de.obj cord\de_win.obj cord\de_win.rbj gc.lib
$(link) -debug:full -debugtype:cv $(guiflags) -stack:16384 -out:cord\de.exe cord\cordbscs.obj cord\cordxtra.obj cord\de.obj cord\de_win.obj cord\de_win.rbj gc.lib $(guilibs)
gc_cpp.obj: include\gc_cpp.h include\gc.h
gc_cpp.cpp: gc_cpp.cc
copy gc_cpp.cc gc_cpp.cpp
test_cpp.cpp: tests\test_cpp.cc
copy tests\test_cpp.cc test_cpp.cpp
# This generates the C++ test executable. The executable expects
# a single numeric argument, which is the number of iterations.
# The output appears in the file "gc.log".
test_cpp.exe: test_cpp.obj include\gc_cpp.h include\gc.h gc.lib
$(link) -debug:full -debugtype:cv $(guiflags) -stack:16384 -out:test_cpp.exe test_cpp.obj gc.lib $(guilibs)
File diff suppressed because it is too large. Load diff
+45
View File
@@ -0,0 +1,45 @@
# Makefile for OS/2. Assumes IBM's compiler, static linking, and a single thread.
# Adding dynamic linking support seems easy, but takes a little bit of work.
# Adding thread support may be nontrivial, since we haven't yet figured out how to
# look at another thread's registers.
# Significantly revised for GC version 4.4 by Mark Boulter (Jan 1994).
OBJS= alloc.obj reclaim.obj allchblk.obj misc.obj mach_dep.obj os_dep.obj mark_rts.obj headers.obj mark.obj obj_map.obj blacklst.obj finalize.obj new_hblk.obj dbg_mlc.obj malloc.obj stubborn.obj typd_mlc.obj ptr_chck.obj mallocx.obj
CORDOBJS= cord\cordbscs.obj cord\cordxtra.obj cord\cordprnt.obj
CC= icc
CFLAGS= /O /Q /DSILENT /DSMALL_CONFIG /DALL_INTERIOR_POINTERS
# Use /Ti instead of /O for debugging
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
all: $(OBJS) gctest.exe cord\cordtest.exe
$(OBJS) test.obj: include\private\gc_priv.h include\private\gc_hdrs.h include\gc.h include\private\gcconfig.h
## ERASE THE LIB FIRST - if it is already there then this command will fail
## (make sure its there or erase will fail!)
gc.lib: $(OBJS)
echo . > gc.lib
erase gc.lib
LIB gc.lib $(OBJS), gc.lst
mach_dep.obj: mach_dep.c
$(CC) $(CFLAGS) /C mach_dep.c
gctest.exe: test.obj gc.lib
$(CC) $(CFLAGS) /B"/STACK:524288" /Fegctest test.obj gc.lib
cord\cordbscs.obj: cord\cordbscs.c include\cord.h include\private\cord_pos.h
$(CC) $(CFLAGS) /C /Focord\cordbscs cord\cordbscs.c
cord\cordxtra.obj: cord\cordxtra.c include\cord.h include\private\cord_pos.h include\ec.h
$(CC) $(CFLAGS) /C /Focord\cordxtra cord\cordxtra.c
cord\cordprnt.obj: cord\cordprnt.c include\cord.h include\private\cord_pos.h include\ec.h
$(CC) $(CFLAGS) /C /Focord\cordprnt cord\cordprnt.c
cord\cordtest.exe: cord\cordtest.c include\cord.h include\private\cord_pos.h include\ec.h $(CORDOBJS) gc.lib
$(CC) $(CFLAGS) /B"/STACK:65536" /Fecord\cordtest cord\cordtest.c gc.lib $(CORDOBJS)
+68
View File
@@ -0,0 +1,68 @@
#
# Default target
#
default: gc.o
include ../config/common.mk
#
# compilation flags, etc.
#
CPPFLAGS = $(INCLUDE) $(CONFIG_CPPFLAGS) \
-DPCR_NO_RENAME -DPCR_NO_HOSTDEP_ERR
#CFLAGS = -DPCR -DSILENT $(CONFIG_CFLAGS)
CFLAGS = -DPCR $(CONFIG_CFLAGS)
SPECIALCFLAGS = # For code involving asm's
ASPPFLAGS = $(INCLUDE) $(CONFIG_ASPPFLAGS) \
-DPCR_NO_RENAME -DPCR_NO_HOSTDEP_ERR -DASM
ASFLAGS = $(CONFIG_ASFLAGS)
LDRFLAGS = $(CONFIG_LDRFLAGS)
LDFLAGS = $(CONFIG_LDFLAGS)
#
#
#
#
# BEGIN PACKAGE-SPECIFIC PART
#
#
#
#
# Fix to point to local pcr installation directory.
PCRDIR= ..
COBJ= alloc.o reclaim.o allchblk.o misc.o os_dep.o mark_rts.o headers.o mark.o obj_map.o pcr_interface.o blacklst.o finalize.o new_hblk.o real_malloc.o dyn_load.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o typd_mlc.o ptr_chck.o mallocx.o
CSRC= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c typd_mlc.c ptr_chck.c mallocx.c
SHELL= /bin/sh
default: gc.o
gc.o: $(COBJ) mach_dep.o
$(LDR) $(CONFIG_LDRFLAGS) -o gc.o $(COBJ) mach_dep.o
mach_dep.o: mach_dep.c mips_mach_dep.s rs6000_mach_dep.s if_mach if_not_there
rm -f mach_dep.o
./if_mach MIPS "" as -o mach_dep.o mips_mach_dep.s
./if_mach RS6000 "" as -o mach_dep.o rs6000_mach_dep.s
./if_mach ALPHA "" as -o mach_dep.o alpha_mach_dep.s
./if_mach SPARC SUNOS5 as -o mach_dep.o sparc_mach_dep.s
./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) mach_dep.c
if_mach: if_mach.c gcconfig.h
$(CC) $(CFLAGS) -o if_mach if_mach.c
if_not_there: if_not_there.c
$(CC) $(CFLAGS) -o if_not_there if_not_there.c
+67
View File
@@ -0,0 +1,67 @@
This is a modified version of Boehm GC 6.1 for Mono.
* There are two main changes to the upstream version:
- Makefile changes:
libgc has a lot of configurable options which are AC_DEFINE()d in its
configure.ac. To make it easier to build and bundle it with Mono, I
replaced most of the orignal configure.ac and the makefiles with custom
versions which just define what we actually need for Mono.
This means that you can just run configure in this directory and it'll
do the right thing. Later on, we'll just include this package in Mono
and use AC_CONFIG_SUBDIRS().
- Threading changes
The original libgc has several *_threads.c files for each possible threading
implementation.
For Mono, we're using a vtable
typedef struct
{
void (* initialize) (void);
void (* lock) (void);
void (* unlock) (void);
void (* stop_world) (void);
void (* push_thread_structures) (void);
void (* push_all_stacks) (void);
void (* start_world) (void);
} GCThreadFunctions;
extern GCThreadFunctions *gc_thread_vtable;
and a mono_threads.c file.
- Deleted files
Some files from the original distribution have been deleted in this version.
These are files which weren't actually linked into the library so they were not
needed. When importing a new upstream version, you can either keep them removed
or just replace them with their new upstream versions.
- include/private/gc_locks.h
This file has been replaced with a custom version.
When importing a new upstream version, keep this custom version, ie. don't import the
new upstream gc_locks.h.
* Importing a new upstream version
This is really simple. Just import the new version to the vendor branch (LIBGC) in CVS
and then merge it into the main trunk.
To get a diff to the original version:
cvs diff -u -r LIBGC
When importing new upstream versions, don't import the new configure.ac or any of the
Makefile.am's; they've been replaced by custom versions. Just import all the new source
files and it should be fine.
April 4th, 2003
Martin Baulig <[email protected]>
+85
View File
@@ -0,0 +1,85 @@
Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
Copyright (c) 1996-1999 by Silicon Graphics. All rights reserved.
Copyright (c) 1999-2001 by Hewlett-Packard. All rights reserved.
THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
Permission is hereby granted to use or copy this program
for any purpose, provided the above notices are retained on all copies.
Permission to modify the code and to distribute modified code is granted,
provided the above notices are retained, and a notice that the code was
modified is included with the above copyright notice.
A few files have other copyright holders. A few of the files needed
to use the GNU-style build procedure come with a modified GPL license
that appears not to significantly restrict use of the collector, though
use of those files for a purpose other than building the collector may
require the resulting code to be covered by the GPL.
For more details and the names of other contributors, see the
doc/README* files and include/gc.h. This file describes typical use of
the collector on a machine that is already supported.
For the version number, see doc/README or version.h.
INSTALLATION:
Under UN*X, Linux:
Alternative 1 (the old way): type "make test" in this directory.
Link against gc.a.
Alternative 2 (the new way): type
"./configure --prefix=<dir>; make; make check; make install".
Link against <dir>/lib/libgc.a or <dir>/lib/libgc.so.
See README.autoconf for details
Under OS/2 or Windows 95, 98, Me, NT, or 2000:
copy the appropriate makefile to MAKEFILE, read it, and type "nmake test".
(Under Windows, this assumes you have Microsoft command-line tools
installed, and have DOS configured with enough environment space to run them.)
Read the machine specific README in the doc directory if one exists.
The only way to develop code with the collector for Windows 3.1 is
to develop under Windows NT or 95+, and then to use win32S.
If you need thread support, you will need to either follow the special
platform-dependent instructions (win32), or add a suitable define
option as described in Makefile.
If you wish to use the cord (structured string) library, type
"make cords". (This requires an ANSI C compiler. You may need
to redefine CC in the Makefile. The CORD_printf implementation in
cordprnt.c is known to be less than perfectly portable. The rest
of the package should still work.)
If you wish to use the collector from C++, type
"make c++". These add further files to gc.a and to the include
subdirectory. See cord/cord.h and include/gc_cpp.h.
TYPICAL USE:
Include "gc.h" from the include subdirectory. Link against the
appropriate library ("gc.a" under UN*X). Replace calls to malloc
by calls to GC_MALLOC, and calls to realloc by calls to GC_REALLOC.
If the object is known to never contain pointers, use GC_MALLOC_ATOMIC
instead of GC_MALLOC.
Define GC_DEBUG before including gc.h for additional checking.
More documentation on the collector interface can be found at
http://www.hpl.hp.com/personal/Hans_Boehm/gc/gcinterface.html,
in doc/README, and in include/gc.h .
WARNINGS:
Do not store the only pointer to an object in memory allocated
with system malloc, since the collector usually does not scan
memory allocated in this way.
Use with threads may be supported on your system, but requires the
collector to be built with thread support. See Makefile. The collector
does not guarantee to scan thread-local storage (e.g. of the kind
accessed with pthread_getspecific()). The collector does scan
thread stacks though, so generally the best solution is to ensure that
any pointers stored in thread-local storage are also stored on the
thread's stack for the duration of their lifetime.
+178
View File
@@ -0,0 +1,178 @@
# Rewritten smakefile for amiga / sas/c. -Kjetil M.
# Dont use the cord-package if you define parm=both or parm=reg.
#----------------TOOLS--------------------------------
CC=sc
LINKER=slink
LIBER=oml
#----------------CPU OPTIONS--------------------------
CPU=68060
#----------------FPU OPTIONS--------------------------
MATH=8
MATHLIB=LIB:scm881.lib
#----------------COMPILER OPTIONS---------------------
IGNORE= IGNORE=85 IGNORE=154 IGNORE=161 IGNORE=100
OPTIMIZE=optimize optimizetime optglobal optimizerdepth=100 optimizerpeephole optloop OPTSCHED optimizerinlocal optimizerrecurdepth=100
# optimizerinline optimizercomplexity=100
OPT= $(OPTIMIZE) CPU=$(CPU) math=$(MATH) NOSTACKCHECK VERBOSE \
MAPHUNK NOVERSION NOICONS nodebug \
DEFINE SILENT \
parm=reg \
DEFINE __USE_SYSBASE
SOPT= $(OPT) $(IGNORE) \
DEFINE AMIGA_SKIP_SEG \
DEFINE ATOMIC_UNCOLLECTABLE \
DEFINE GC_AMIGA_FASTALLOC \
DEFINE GC_AMIGA_RETRY \
DEFINE GC_AMIGA_PRINTSTATS \
DEFINE GC_AMIGA_GC
#DEFINE ALL_INTERIOR_POINTERS \
SCOPT= $(SOPT) define GC_AMIGA_MAKINGLIB
CSCOPT= $(OPT) DEFINE AMIGA IGNORE=100 IGNORE=161
#------------------LINKING----------------------------
all: gctest setjmp_t cord/cordtest
clean:
delete *.lib gctest setjmp_t *.o *.lnk cord/*.o cord/*.lib cord/*.lnk cord/cordtest
smake
test: setjmp_t gctest cord/cordtest
setjmp_t
gctest
cord/cordtest
gctest: gc$(CPU).lib GCAmigaOS$(CPU).lib test.o
$(LINKER) LIB:c.o test.o TO gctest LIB gc$(CPU).lib LIB:sc.lib $(MATHLIB)
setjmp_t: setjmp_t.o gc.h
$(LINKER) LIB:c.o setjmp_t.o to setjmp_t lib LIB:sc.lib
cord/cordtest: cord/cordtest.o cord/cord$(CPU).lib gc$(CPU).lib
slink LIB:c.o cord/cordtest.o LIB $(MATHLIB) gc$(CPU).lib cord/cord$(CPU).lib LIB:sc.lib TO cord/cordtest
#------------------LIBBING----------------------------
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o real_malloc.o dyn_load.o dbg_mlc.o malloc.o stubborn.o checksums.o typd_mlc.o ptr_chck.o mallocx.o
gc$(CPU).lib: $(OBJS)
$(LIBER) gc$(CPU).lib r $(OBJS)
COBJS = cord/cordbscs.o cord/cordprnt.o cord/cordxtra.o
cord/cord$(CPU).lib: $(COBJS)
oml cord/cord$(CPU).lib r $(COBJS)
#------------------COMPILING--------------------------
INC= gc_private.h gc_hdrs.h gc.h gcconfig.h
alloc.o : alloc.c $(INC)
$(CC) alloc.c $(SCOPT) ignore=7
reclaim.o : reclaim.c $(INC)
$(CC) reclaim.c $(SCOPT)
allchblk.o : allchblk.c $(INC)
$(CC) allchblk.c $(SCOPT)
misc.o : misc.c $(INC)
$(CC) misc.c $(SCOPT)
os_dep.o : os_dep.c $(INC) AmigaOS.c
$(CC) os_dep.c $(SCOPT)
mark_rts.o : mark_rts.c $(INC)
$(CC) mark_rts.c $(SCOPT)
headers.o : headers.c $(INC)
$(CC) headers.c $(SCOPT)
mark.o : mark.c $(INC)
$(CC) mark.c $(SCOPT)
obj_map.o : obj_map.c $(INC)
$(CC) obj_map.c $(SCOPT)
blacklst.o : blacklst.c $(INC)
$(CC) blacklst.c $(SCOPT)
finalize.o : finalize.c $(INC)
$(CC) finalize.c $(SCOPT) noopt #Could sas/c still have problems with this one? Gctest sometimes fails to finalize all.
new_hblk.o : new_hblk.c $(INC)
$(CC) new_hblk.c $(SCOPT)
real_malloc.o : real_malloc.c $(INC)
$(CC) real_malloc.c $(SCOPT)
dyn_load.o : dyn_load.c $(INC)
$(CC) dyn_load.c $(SCOPT)
dbg_mlc.o : dbg_mlc.c $(INC)
$(CC) dbg_mlc.c $(SCOPT)
malloc.o : malloc.c $(INC)
$(CC) malloc.c $(SCOPT)
mallocx.o : mallocx.c $(INC)
$(CC) mallocx.c $(SCOPT)
stubborn.o : stubborn.c $(INC)
$(CC) stubborn.c $(SCOPT)
checksums.o : checksums.c $(INC)
$(CC) checksums.c $(SCOPT)
typd_mlc.o: typd_mlc.c $(INC)
$(CC) typd_mlc.c $(SCOPT)
mach_dep.o : mach_dep.c $(INC)
$(CC) mach_dep.c $(SCOPT)
ptr_chck.o: ptr_chck.c $(INC)
$(CC) ptr_chck.c $(SCOPT)
test.o : test.c $(INC)
$(CC) test.c $(SOPT)
setjmp_t: setjmp_t.c gc.h
$(CC) setjmp_t.c $(SOPT)
# cords:
cord/cordbscs.o: cord/cordbscs.c
sc cord/cordbscs.c $(CSCOPT)
cord/cordprnt.o: cord/cordprnt.c
sc cord/cordprnt.c $(CSCOPT)
cord/cordxtra.o: cord/cordxtra.c
sc cord/cordxtra.c $(CSCOPT)
cord/cordtest.o: cord/cordtest.c
sc cord/cordtest.c $(CSCOPT)
+196
View File
@@ -0,0 +1,196 @@
# Makefile for Watcom C/C++ 10.5, 10.6, 11.0 on NT, OS2 and DOS4GW.
# May work with Watcom 10.0.
# Uncoment one of the lines below for cross compilation.
SYSTEM=MSWIN32
#SYSTEM=DOS4GW
#SYSTEM=OS2
# The collector can be built either as dynamic or as static library.
# Select the library type you need.
#MAKE_AS_DLL=1
MAKE_AS_LIB=1
# Select calling conventions.
# Possible choices are r and s.
CALLING=s
# Select target CPU.
# Possible choices are 3, 4, 5, and 6.
# The last choice available only since version 11.0.
CPU=5
# Set optimization options.
# Watcom before 11.0 does not support option "-oh".
OPTIM=-oneatx -s
#OPTIM=-ohneatx -s
DEFS=-DALL_INTERIOR_POINTERS -DSILENT -DNO_SIGNALS #-DSMALL_CONFIG #-DGC_DEBUG
#####
!ifndef SYSTEM
!ifdef __MSDOS__
SYSTEM=DOS4GW
!else ifdef __NT__
SYSTEM=MSWIN32
!else ifdef __OS2__
SYSTEM=OS2
!else
SYSTEM=Unknown
!endif
!endif
!define $(SYSTEM)
!ifdef DOS4GW
SYSFLAG=-DDOS4GW -bt=dos
!else ifdef MSWIN32
SYSFLAG=-DMSWIN32 -bt=nt
!else ifdef OS2
SYSFLAG=-DOS2 -bt=os2
!else
!error undefined or unsupported target platform: $(SYSTEM)
!endif
!ifdef MAKE_AS_DLL
DLLFLAG=-bd -DGC_DLL
TEST_DLLFLAG=-DGC_DLL
!else ifdef MAKE_AS_LIB
DLLFLAG=
TEST_DLLFLAG=
!else
!error Either MAKE_AS_LIB or MAKE_AS_DLL should be defined
!endif
CC=wcc386
CXX=wpp386
# -DUSE_GENERIC is required !
CFLAGS=-$(CPU)$(CALLING) $(OPTIM) -zp4 -zc $(SYSFLAG) $(DLLFLAG) -DGC_BUILD -DUSE_GENERIC $(DEFS)
CXXFLAGS= $(CFLAGS)
TEST_CFLAGS=-$(CPU)$(CALLING) $(OPTIM) -zp4 -zc $(SYSFLAG) $(TEST_DLLFLAG) $(DEFS)
TEST_CXXFLAGS= $(TEST_CFLAGS)
OBJS= alloc.obj reclaim.obj allchblk.obj misc.obj &
mach_dep.obj os_dep.obj mark_rts.obj headers.obj mark.obj &
obj_map.obj blacklst.obj finalize.obj new_hblk.obj &
dbg_mlc.obj malloc.obj stubborn.obj dyn_load.obj &
typd_mlc.obj ptr_chck.obj mallocx.obj
all: gc.lib gctest.exe test_cpp.exe
!ifdef MAKE_AS_DLL
gc.lib: gc.dll gc_cpp.obj
*wlib -b -c -n -p=512 $@ +gc.dll +gc_cpp.obj
gc.dll: $(OBJS) .AUTODEPEND
@%create $*.lnk
!ifdef DOS4GW
@%append $*.lnk sys os2v2_dll
!else ifdef MSWIN32
@%append $*.lnk sys nt_dll
!else ifdef OS2
@%append $*.lnk sys os2v2_dll
!endif
@%append $*.lnk name $*
@for %i in ($(OBJS)) do @%append $*.lnk file '%i'
!ifeq CALLING s
@%append $*.lnk export GC_is_marked
@%append $*.lnk export GC_incr_words_allocd
@%append $*.lnk export GC_incr_mem_freed
@%append $*.lnk export GC_generic_malloc_words_small
!else
@%append $*.lnk export GC_is_marked_
@%append $*.lnk export GC_incr_words_allocd_
@%append $*.lnk export GC_incr_mem_freed_
@%append $*.lnk export GC_generic_malloc_words_small_
!endif
*wlink @$*.lnk
!else
gc.lib: $(OBJS) gc_cpp.obj
@%create $*.lb1
@for %i in ($(OBJS)) do @%append $*.lb1 +'%i'
@%append $*.lb1 +'gc_cpp.obj'
*wlib -b -c -n -p=512 $@ @$*.lb1
!endif
gctest.exe: test.obj gc.lib
%create $*.lnk
!ifdef DOS4GW
@%append $*.lnk sys dos4g
!else ifdef MSWIN32
@%append $*.lnk sys nt
!else ifdef OS2
@%append $*.lnk sys os2v2
!endif
@%append $*.lnk op case
@%append $*.lnk op stack=256K
@%append $*.lnk name $*
@%append $*.lnk file test.obj
@%append $*.lnk library gc.lib
!ifdef MAKE_AS_DLL
!ifeq CALLING s
@%append $*.lnk import GC_is_marked gc
!else
@%append $*.lnk import GC_is_marked_ gc
!endif
!endif
*wlink @$*.lnk
test_cpp.exe: test_cpp.obj gc.lib
%create $*.lnk
!ifdef DOS4GW
@%append $*.lnk sys dos4g
!else ifdef MSWIN32
@%append $*.lnk sys nt
!else ifdef OS2
@%append $*.lnk sys os2v2
!endif
@%append $*.lnk op case
@%append $*.lnk op stack=256K
@%append $*.lnk name $*
@%append $*.lnk file test_cpp.obj
@%append $*.lnk library gc.lib
!ifdef MAKE_AS_DLL
!ifeq CALLING s
@%append $*.lnk import GC_incr_words_allocd gc
@%append $*.lnk import GC_incr_mem_freed gc
@%append $*.lnk import GC_generic_malloc_words_small gc
!else
@%append $*.lnk import GC_incr_words_allocd_ gc
@%append $*.lnk import GC_incr_mem_freed_ gc
@%append $*.lnk import GC_generic_malloc_words_small_ gc
!endif
!endif
*wlink @$*.lnk
gc_cpp.obj: gc_cpp.cc .AUTODEPEND
$(CXX) $(TEST_CXXFLAGS) -iinclude $*.cc
test.obj: tests\test.c .AUTODEPEND
$(CC) $(TEST_CFLAGS) $*.c
test_cpp.obj: tests\test_cpp.cc .AUTODEPEND
$(CXX) $(TEST_CXXFLAGS) -iinclude $*.cc
.c.obj: .AUTODEPEND
$(CC) $(CFLAGS) $*.c
.cc.obj: .AUTODEPEND
$(CXX) $(CXXFLAGS) $*.cc
clean : .SYMBOLIC
@if exist *.obj del *.obj
@if exist *.map del *.map
@if exist *.lnk del *.lnk
@if exist *.lb1 del *.lb1
@if exist *.sym del *.sym
@if exist *.err del *.err
@if exist *.tmp del *.tmp
@if exist *.lst del *.lst
@if exist *.exe del *.exe
@if exist *.log del *.log
@if exist *.lib del *.lib
@if exist *.dll del *.dll
+182
View File
@@ -0,0 +1,182 @@
dnl dolt, a replacement for libtool
dnl Copyright © 2007-2008 Josh Triplett <[email protected]>
dnl Copying and distribution of this file, with or without modification,
dnl are permitted in any medium without royalty provided the copyright
dnl notice and this notice are preserved.
dnl
dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
dnl installed when running autoconf on your project.
AC_DEFUN([DOLT], [
AC_REQUIRE([AC_CANONICAL_HOST])
# dolt, a replacement for libtool
# Josh Triplett <[email protected]>
AC_PATH_PROG(DOLT_BASH, bash)
AC_MSG_CHECKING([if dolt supports this host])
dolt_supported=yes
if test x$DOLT_BASH = x; then
dolt_supported=no
fi
if test x$GCC != xyes; then
dolt_supported=no
fi
case $host in
i?86-*-linux*|i?86-apple-darwin*|x86_64-*-linux*|powerpc-*-linux*|powerpc64-*-linux* \
|amd64-*-freebsd*|i?86-*-freebsd*|ia64-*-freebsd*|arm*-*-linux*|sparc*-*-linux*|mips*-*-linux*|x86_64-apple-darwin*|aarch64*)
pic_options='-fPIC'
;;
?86-pc-cygwin*|i?86-pc-cygwin*|i?86-pc-mingw32*)
pic_options='-DDLL_EXPORT'
;;
i?86-apple-darwin*|arm-apple-darwin*)
pic_options='-fno-common'
;;
*)
dolt_supported=no
;;
esac
if test x$dolt_supported = xno ; then
AC_MSG_RESULT([no, falling back to libtool])
LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
else
AC_MSG_RESULT([yes, replacing libtool])
dnl Start writing out doltcompile.
cat <<__DOLTCOMPILE__EOF__ >doltcompile
#!$DOLT_BASH
__DOLTCOMPILE__EOF__
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
args=("$[]@")
for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
if test x"${args@<:@$arg@:>@}" = x-o ; then
objarg=$((arg+1))
break
fi
done
if test x$objarg = x ; then
echo 'Error: no -o on compiler command line' 1>&2
exit 1
fi
lo="${args@<:@$objarg@:>@}"
obj="${lo%.lo}"
if test x"$lo" = x"$obj" ; then
echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
exit 1
fi
objbase="${obj##*/}"
__DOLTCOMPILE__EOF__
dnl Write out shared compilation code.
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
libobjdir="${obj%$objbase}.libs"
if test ! -d "$libobjdir" ; then
mkdir_out="$(mkdir "$libobjdir" 2>&1)"
mkdir_ret=$?
if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
echo "$mkdir_out" 1>&2
exit $mkdir_ret
fi
fi
pic_object="$libobjdir/$objbase.o"
args@<:@$objarg@:>@="$pic_object"
__DOLTCOMPILE__EOF__
cat <<__DOLTCOMPILE__EOF__ >>doltcompile
"\${args@<:@@@:>@}" $pic_options -DPIC || exit \$?
__DOLTCOMPILE__EOF__
fi
dnl Write out static compilation code.
dnl Avoid duplicate compiler output if also building shared objects.
if test x$enable_static = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
non_pic_object="$obj.o"
args@<:@$objarg@:>@="$non_pic_object"
__DOLTCOMPILE__EOF__
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" >/dev/null 2>&1 || exit $?
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" || exit $?
__DOLTCOMPILE__EOF__
fi
fi
dnl Write out the code to write the .lo file.
dnl The second line of the .lo file must match "^# Generated by .*libtool"
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
{
echo "# $lo - a libtool object file"
echo "# Generated by doltcompile, not libtool"
__DOLTCOMPILE__EOF__
if test x$enable_shared = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "pic_object='.libs/${objbase}.o'"
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo pic_object=none
__DOLTCOMPILE__EOF__
fi
if test x$enable_static = xyes; then
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "non_pic_object='${objbase}.o'"
__DOLTCOMPILE__EOF__
else
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo non_pic_object=none
__DOLTCOMPILE__EOF__
fi
cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
} > "$lo"
__DOLTCOMPILE__EOF__
dnl Done writing out doltcompile; substitute it for libtool compilation.
chmod +x doltcompile
LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
dnl automake ignores LTCOMPILE and LTCXXCOMPILE when it has separate CFLAGS for
dnl a target, so write out a libtool wrapper to handle that case.
dnl Note that doltlibtool does not handle inferred tags or option arguments
dnl without '=', because automake does not use them.
cat <<__DOLTLIBTOOL__EOF__ > doltlibtool
#!$DOLT_BASH
__DOLTLIBTOOL__EOF__
cat <<'__DOLTLIBTOOL__EOF__' >>doltlibtool
top_builddir_slash="${0%%doltlibtool}"
: ${top_builddir_slash:=./}
args=()
modeok=false
tagok=false
for arg in "$[]@"; do
case "$arg" in
--silent) ;;
--mode=compile) modeok=true ;;
--tag=CC|--tag=CXX) tagok=true ;;
--quiet) ;;
*) args@<:@${#args[@]}@:>@="$arg" ;;
esac
done
if $modeok && $tagok ; then
. ${top_builddir_slash}doltcompile "${args@<:@@@:>@}"
else
exec ${top_builddir_slash}libtool "$[]@"
fi
__DOLTLIBTOOL__EOF__
dnl Done writing out doltlibtool; substitute it for libtool.
chmod +x doltlibtool
LIBTOOL='$(top_builddir)/doltlibtool'
fi
AC_SUBST(LTCOMPILE)
AC_SUBST(LTCXXCOMPILE)
# end dolt
])
+20
View File
@@ -0,0 +1,20 @@
# include <stdio.h>
# include "version.h"
int main(argc, argv, envp)
int argc;
char ** argv;
char ** envp;
{
int i;
for (i = 1; i < argc; i++) {
if (GC_ALPHA_VERSION == GC_NOT_ALPHA) {
printf("gc%d.%d/%s ", GC_VERSION_MAJOR, GC_VERSION_MINOR, argv[i]);
} else {
printf("gc%d.%dalpha%d/%s ", GC_VERSION_MAJOR,
GC_VERSION_MINOR, GC_ALPHA_VERSION, argv[i]);
}
}
return(0);
}
+688
View File
@@ -0,0 +1,688 @@
/*
* Copyright (c) 1991-1995 by Xerox Corporation. All rights reserved.
* Copyright (c) 1996-1999 by Silicon Graphics. All rights reserved.
* Copyright (c) 1999-2003 by Hewlett-Packard Company. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/*
* Support code for Irix (>=6.2) Pthreads and for AIX pthreads.
* This relies on properties
* not guaranteed by the Pthread standard. It may or may not be portable
* to other implementations.
*
* Note that there is a lot of code duplication between this file and
* (pthread_support.c, pthread_stop_world.c). They should be merged.
* Pthread_support.c should be directly usable.
*
* Please avoid adding new ports here; use the generic pthread support
* as a base instead.
*/
# if defined(GC_IRIX_THREADS) || defined(GC_AIX_THREADS)
# include "private/gc_priv.h"
# include <pthread.h>
# include <assert.h>
# include <semaphore.h>
# include <time.h>
# include <errno.h>
# include <unistd.h>
# include <sys/mman.h>
# include <sys/time.h>
#undef pthread_create
#undef pthread_sigmask
#undef pthread_join
#if defined(GC_IRIX_THREADS) && !defined(MUTEX_RECURSIVE_NP)
#define MUTEX_RECURSIVE_NP PTHREAD_MUTEX_RECURSIVE
#endif
void GC_thr_init();
#if 0
void GC_print_sig_mask()
{
sigset_t blocked;
int i;
if (pthread_sigmask(SIG_BLOCK, NULL, &blocked) != 0)
ABORT("pthread_sigmask");
GC_printf0("Blocked: ");
for (i = 1; i <= MAXSIG; i++) {
if (sigismember(&blocked, i)) { GC_printf1("%ld ",(long) i); }
}
GC_printf0("\n");
}
#endif
/* We use the allocation lock to protect thread-related data structures. */
/* The set of all known threads. We intercept thread creation and */
/* joins. We never actually create detached threads. We allocate all */
/* new thread stacks ourselves. These allow us to maintain this */
/* data structure. */
/* Protected by GC_thr_lock. */
/* Some of this should be declared volatile, but that's incosnsistent */
/* with some library routine declarations. */
typedef struct GC_Thread_Rep {
struct GC_Thread_Rep * next; /* More recently allocated threads */
/* with a given pthread id come */
/* first. (All but the first are */
/* guaranteed to be dead, but we may */
/* not yet have registered the join.) */
pthread_t id;
word stop;
# define NOT_STOPPED 0
# define PLEASE_STOP 1
# define STOPPED 2
word flags;
# define FINISHED 1 /* Thread has exited. */
# define DETACHED 2 /* Thread is intended to be detached. */
ptr_t stack_cold; /* cold end of the stack */
ptr_t stack_hot; /* Valid only when stopped. */
/* But must be within stack region at */
/* all times. */
void * status; /* Used only to avoid premature */
/* reclamation of any data it might */
/* reference. */
} * GC_thread;
GC_thread GC_lookup_thread(pthread_t id);
/*
* The only way to suspend threads given the pthread interface is to send
* signals. Unfortunately, this means we have to reserve
* a signal, and intercept client calls to change the signal mask.
*/
#if 0 /* DOB: 6.1 */
# if defined(GC_AIX_THREADS)
# define SIG_SUSPEND SIGUSR1
# else
# define SIG_SUSPEND (SIGRTMIN + 6)
# endif
#endif
pthread_mutex_t GC_suspend_lock = PTHREAD_MUTEX_INITIALIZER;
/* Number of threads stopped so far */
pthread_cond_t GC_suspend_ack_cv = PTHREAD_COND_INITIALIZER;
pthread_cond_t GC_continue_cv = PTHREAD_COND_INITIALIZER;
void GC_suspend_handler(int sig)
{
int dummy;
GC_thread me;
sigset_t all_sigs;
sigset_t old_sigs;
int i;
if (sig != SIG_SUSPEND) ABORT("Bad signal in suspend_handler");
me = GC_lookup_thread(pthread_self());
/* The lookup here is safe, since I'm doing this on behalf */
/* of a thread which holds the allocation lock in order */
/* to stop the world. Thus concurrent modification of the */
/* data structure is impossible. */
if (PLEASE_STOP != me -> stop) {
/* Misdirected signal. */
pthread_mutex_unlock(&GC_suspend_lock);
return;
}
pthread_mutex_lock(&GC_suspend_lock);
me -> stack_hot = (ptr_t)(&dummy);
me -> stop = STOPPED;
pthread_cond_signal(&GC_suspend_ack_cv);
pthread_cond_wait(&GC_continue_cv, &GC_suspend_lock);
pthread_mutex_unlock(&GC_suspend_lock);
/* GC_printf1("Continuing 0x%x\n", pthread_self()); */
}
GC_bool GC_thr_initialized = FALSE;
# define THREAD_TABLE_SZ 128 /* Must be power of 2 */
volatile GC_thread GC_threads[THREAD_TABLE_SZ];
void GC_push_thread_structures GC_PROTO((void))
{
GC_push_all((ptr_t)(GC_threads), (ptr_t)(GC_threads)+sizeof(GC_threads));
}
/* Add a thread to GC_threads. We assume it wasn't already there. */
/* Caller holds allocation lock. */
GC_thread GC_new_thread(pthread_t id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
GC_thread result;
static struct GC_Thread_Rep first_thread;
static GC_bool first_thread_used = FALSE;
GC_ASSERT(I_HOLD_LOCK());
if (!first_thread_used) {
result = &first_thread;
first_thread_used = TRUE;
/* Dont acquire allocation lock, since we may already hold it. */
} else {
result = (struct GC_Thread_Rep *)
GC_generic_malloc_inner(sizeof(struct GC_Thread_Rep), NORMAL);
}
if (result == 0) return(0);
result -> id = id;
result -> next = GC_threads[hv];
GC_threads[hv] = result;
/* result -> flags = 0; */
/* result -> stop = 0; */
return(result);
}
/* Delete a thread from GC_threads. We assume it is there. */
/* (The code intentionally traps if it wasn't.) */
/* Caller holds allocation lock. */
/* We explicitly pass in the GC_thread we're looking for, since */
/* if a thread has been joined, but we have not yet */
/* been notified, then there may be more than one thread */
/* in the table with the same pthread id. */
/* This is OK, but we need a way to delete a specific one. */
void GC_delete_gc_thread(pthread_t id, GC_thread gc_id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
register GC_thread p = GC_threads[hv];
register GC_thread prev = 0;
GC_ASSERT(I_HOLD_LOCK());
while (p != gc_id) {
prev = p;
p = p -> next;
}
if (prev == 0) {
GC_threads[hv] = p -> next;
} else {
prev -> next = p -> next;
}
}
/* Return a GC_thread corresponding to a given thread_t. */
/* Returns 0 if it's not there. */
/* Caller holds allocation lock or otherwise inhibits */
/* updates. */
/* If there is more than one thread with the given id we */
/* return the most recent one. */
GC_thread GC_lookup_thread(pthread_t id)
{
int hv = ((word)id) % THREAD_TABLE_SZ;
register GC_thread p = GC_threads[hv];
/* I either hold the lock, or i'm being called from the stop-the-world
* handler. */
#if defined(GC_AIX_THREADS)
GC_ASSERT(I_HOLD_LOCK()); /* no stop-the-world handler needed on AIX */
#endif
while (p != 0 && !pthread_equal(p -> id, id)) p = p -> next;
return(p);
}
#if defined(GC_AIX_THREADS)
void GC_stop_world()
{
pthread_t my_thread = pthread_self();
register int i;
register GC_thread p;
register int result;
struct timespec timeout;
GC_ASSERT(I_HOLD_LOCK());
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
if (p -> id != my_thread) {
pthread_suspend_np(p->id);
}
}
}
/* GC_printf1("World stopped 0x%x\n", pthread_self()); */
}
void GC_start_world()
{
GC_thread p;
unsigned i;
pthread_t my_thread = pthread_self();
/* GC_printf0("World starting\n"); */
GC_ASSERT(I_HOLD_LOCK());
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
if (p -> id != my_thread) {
pthread_continue_np(p->id);
}
}
}
}
#else /* GC_AIX_THREADS */
/* Caller holds allocation lock. */
void GC_stop_world()
{
pthread_t my_thread = pthread_self();
register int i;
register GC_thread p;
register int result;
struct timespec timeout;
GC_ASSERT(I_HOLD_LOCK());
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
if (p -> id != my_thread) {
if (p -> flags & FINISHED) {
p -> stop = STOPPED;
continue;
}
p -> stop = PLEASE_STOP;
result = pthread_kill(p -> id, SIG_SUSPEND);
/* GC_printf1("Sent signal to 0x%x\n", p -> id); */
switch(result) {
case ESRCH:
/* Not really there anymore. Possible? */
p -> stop = STOPPED;
break;
case 0:
break;
default:
ABORT("pthread_kill failed");
}
}
}
}
pthread_mutex_lock(&GC_suspend_lock);
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
while (p -> id != my_thread && p -> stop != STOPPED) {
clock_gettime(CLOCK_REALTIME, &timeout);
timeout.tv_nsec += 50000000; /* 50 msecs */
if (timeout.tv_nsec >= 1000000000) {
timeout.tv_nsec -= 1000000000;
++timeout.tv_sec;
}
result = pthread_cond_timedwait(&GC_suspend_ack_cv,
&GC_suspend_lock,
&timeout);
if (result == ETIMEDOUT) {
/* Signal was lost or misdirected. Try again. */
/* Duplicate signals should be benign. */
result = pthread_kill(p -> id, SIG_SUSPEND);
}
}
}
}
pthread_mutex_unlock(&GC_suspend_lock);
/* GC_printf1("World stopped 0x%x\n", pthread_self()); */
}
/* Caller holds allocation lock. */
void GC_start_world()
{
GC_thread p;
unsigned i;
/* GC_printf0("World starting\n"); */
GC_ASSERT(I_HOLD_LOCK());
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
p -> stop = NOT_STOPPED;
}
}
pthread_mutex_lock(&GC_suspend_lock);
/* All other threads are at pthread_cond_wait in signal handler. */
/* Otherwise we couldn't have acquired the lock. */
pthread_mutex_unlock(&GC_suspend_lock);
pthread_cond_broadcast(&GC_continue_cv);
}
#endif /* GC_AIX_THREADS */
/* We hold allocation lock. Should do exactly the right thing if the */
/* world is stopped. Should not fail if it isn't. */
void GC_push_all_stacks()
{
register int i;
register GC_thread p;
register ptr_t hot, cold;
pthread_t me = pthread_self();
/* GC_init() should have been called before GC_push_all_stacks is
* invoked, and GC_init calls GC_thr_init(), which sets
* GC_thr_initialized. */
GC_ASSERT(GC_thr_initialized);
/* GC_printf1("Pushing stacks from thread 0x%x\n", me); */
GC_ASSERT(I_HOLD_LOCK());
for (i = 0; i < THREAD_TABLE_SZ; i++) {
for (p = GC_threads[i]; p != 0; p = p -> next) {
if (p -> flags & FINISHED) continue;
cold = p->stack_cold;
if (!cold) cold=GC_stackbottom; /* 0 indicates 'original stack' */
if (pthread_equal(p -> id, me)) {
hot = GC_approx_sp();
} else {
# ifdef GC_AIX_THREADS
/* AIX doesn't use signals to suspend, so we need to get an */
/* accurate hot stack pointer. */
/* See http://publib16.boulder.ibm.com/pseries/en_US/libs/basetrf1/pthread_getthrds_np.htm */
pthread_t id = p -> id;
struct __pthrdsinfo pinfo;
int regbuf[64];
int val = sizeof(regbuf);
int retval = pthread_getthrds_np(&id, PTHRDSINFO_QUERY_ALL, &pinfo,
sizeof(pinfo), regbuf, &val);
if (retval != 0) {
printf("ERROR: pthread_getthrds_np() failed in GC\n");
abort();
}
/* according to the AIX ABI,
"the lowest possible valid stack address is 288 bytes (144 + 144)
less than the current value of the stack pointer. Functions may
use this stack space as volatile storage which is not preserved
across function calls."
ftp://ftp.penguinppc64.org/pub/people/amodra/PPC-elf64abi.txt.gz
*/
hot = (ptr_t)(unsigned long)pinfo.__pi_ustk-288;
cold = (ptr_t)pinfo.__pi_stackend; /* more precise */
/* push the registers too, because they won't be on stack */
GC_push_all_eager((ptr_t)&pinfo.__pi_context,
(ptr_t)((&pinfo.__pi_context)+1));
GC_push_all_eager((ptr_t)regbuf, ((ptr_t)regbuf)+val);
# else
hot = p -> stack_hot;
# endif
}
# ifdef STACK_GROWS_UP
GC_push_all_stack(cold, hot);
# else
/* printf("thread 0x%x: hot=0x%08x cold=0x%08x\n", p -> id, hot, cold); */
GC_push_all_stack(hot, cold);
# endif
}
}
}
/* We hold the allocation lock. */
void GC_thr_init()
{
GC_thread t;
struct sigaction act;
if (GC_thr_initialized) return;
GC_ASSERT(I_HOLD_LOCK());
GC_thr_initialized = TRUE;
#ifndef GC_AIX_THREADS
(void) sigaction(SIG_SUSPEND, 0, &act);
if (act.sa_handler != SIG_DFL)
ABORT("Previously installed SIG_SUSPEND handler");
/* Install handler. */
act.sa_handler = GC_suspend_handler;
act.sa_flags = SA_RESTART;
(void) sigemptyset(&act.sa_mask);
if (0 != sigaction(SIG_SUSPEND, &act, 0))
ABORT("Failed to install SIG_SUSPEND handler");
#endif
/* Add the initial thread, so we can stop it. */
t = GC_new_thread(pthread_self());
/* use '0' to indicate GC_stackbottom, since GC_init() has not
* completed by the time we are called (from GC_init_inner()) */
t -> stack_cold = 0; /* the original stack. */
t -> stack_hot = (ptr_t)(&t);
t -> flags = DETACHED;
}
int GC_pthread_sigmask(int how, const sigset_t *set, sigset_t *oset)
{
sigset_t fudged_set;
#ifdef GC_AIX_THREADS
return(pthread_sigmask(how, set, oset));
#endif
if (set != NULL && (how == SIG_BLOCK || how == SIG_SETMASK)) {
fudged_set = *set;
sigdelset(&fudged_set, SIG_SUSPEND);
set = &fudged_set;
}
return(pthread_sigmask(how, set, oset));
}
struct start_info {
void *(*start_routine)(void *);
void *arg;
word flags;
pthread_mutex_t registeredlock;
pthread_cond_t registered;
int volatile registereddone;
};
void GC_thread_exit_proc(void *arg)
{
GC_thread me;
LOCK();
me = GC_lookup_thread(pthread_self());
me -> flags |= FINISHED;
/* reclaim DETACHED thread right away; otherwise wait until join() */
if (me -> flags & DETACHED) {
GC_delete_gc_thread(pthread_self(), me);
}
UNLOCK();
}
int GC_pthread_join(pthread_t thread, void **retval)
{
int result;
GC_thread thread_gc_id;
LOCK();
thread_gc_id = GC_lookup_thread(thread);
/* This is guaranteed to be the intended one, since the thread id */
/* cant have been recycled by pthreads. */
UNLOCK();
GC_ASSERT(!(thread_gc_id->flags & DETACHED));
result = pthread_join(thread, retval);
/* Some versions of the Irix pthreads library can erroneously */
/* return EINTR when the call succeeds. */
if (EINTR == result) result = 0;
GC_ASSERT(thread_gc_id->flags & FINISHED);
LOCK();
/* Here the pthread thread id may have been recycled. */
GC_delete_gc_thread(thread, thread_gc_id);
UNLOCK();
return result;
}
void * GC_start_routine(void * arg)
{
int dummy;
struct start_info * si = arg;
void * result;
GC_thread me;
pthread_t my_pthread;
void *(*start)(void *);
void *start_arg;
my_pthread = pthread_self();
/* If a GC occurs before the thread is registered, that GC will */
/* ignore this thread. That's fine, since it will block trying to */
/* acquire the allocation lock, and won't yet hold interesting */
/* pointers. */
LOCK();
/* We register the thread here instead of in the parent, so that */
/* we don't need to hold the allocation lock during pthread_create. */
/* Holding the allocation lock there would make REDIRECT_MALLOC */
/* impossible. It probably still doesn't work, but we're a little */
/* closer ... */
/* This unfortunately means that we have to be careful the parent */
/* doesn't try to do a pthread_join before we're registered. */
me = GC_new_thread(my_pthread);
me -> flags = si -> flags;
me -> stack_cold = (ptr_t) &dummy; /* this now the 'start of stack' */
me -> stack_hot = me->stack_cold;/* this field should always be sensible */
UNLOCK();
start = si -> start_routine;
start_arg = si -> arg;
pthread_mutex_lock(&(si->registeredlock));
si->registereddone = 1;
pthread_cond_signal(&(si->registered));
pthread_mutex_unlock(&(si->registeredlock));
/* si went away as soon as we did this unlock */
pthread_cleanup_push(GC_thread_exit_proc, 0);
result = (*start)(start_arg);
me -> status = result;
pthread_cleanup_pop(1);
/* This involves acquiring the lock, ensuring that we can't exit */
/* while a collection that thinks we're alive is trying to stop */
/* us. */
return(result);
}
int
GC_pthread_create(pthread_t *new_thread,
const pthread_attr_t *attr,
void *(*start_routine)(void *), void *arg)
{
int result;
GC_thread t;
int detachstate;
word my_flags = 0;
struct start_info * si;
/* This is otherwise saved only in an area mmapped by the thread */
/* library, which isn't visible to the collector. */
LOCK();
/* GC_INTERNAL_MALLOC implicitly calls GC_init() if required */
si = (struct start_info *)GC_INTERNAL_MALLOC(sizeof(struct start_info),
NORMAL);
GC_ASSERT(GC_thr_initialized); /* initialized by GC_init() */
UNLOCK();
if (0 == si) return(ENOMEM);
pthread_mutex_init(&(si->registeredlock), NULL);
pthread_cond_init(&(si->registered),NULL);
pthread_mutex_lock(&(si->registeredlock));
si -> start_routine = start_routine;
si -> arg = arg;
pthread_attr_getdetachstate(attr, &detachstate);
if (PTHREAD_CREATE_DETACHED == detachstate) my_flags |= DETACHED;
si -> flags = my_flags;
result = pthread_create(new_thread, attr, GC_start_routine, si);
/* Wait until child has been added to the thread table. */
/* This also ensures that we hold onto si until the child is done */
/* with it. Thus it doesn't matter whether it is otherwise */
/* visible to the collector. */
if (0 == result) {
si->registereddone = 0;
while (!si->registereddone)
pthread_cond_wait(&(si->registered), &(si->registeredlock));
}
pthread_mutex_unlock(&(si->registeredlock));
pthread_cond_destroy(&(si->registered));
pthread_mutex_destroy(&(si->registeredlock));
LOCK();
GC_INTERNAL_FREE(si);
UNLOCK();
return(result);
}
/* For now we use the pthreads locking primitives on HP/UX */
VOLATILE GC_bool GC_collecting = 0; /* A hint that we're in the collector and */
/* holding the allocation lock for an */
/* extended period. */
/* Reasonably fast spin locks. Basically the same implementation */
/* as STL alloc.h. */
#define SLEEP_THRESHOLD 3
volatile unsigned int GC_allocate_lock = 0;
#define GC_TRY_LOCK() !GC_test_and_set(&GC_allocate_lock)
#define GC_LOCK_TAKEN GC_allocate_lock
void GC_lock()
{
# define low_spin_max 30 /* spin cycles if we suspect uniprocessor */
# define high_spin_max 1000 /* spin cycles for multiprocessor */
static unsigned spin_max = low_spin_max;
unsigned my_spin_max;
static unsigned last_spins = 0;
unsigned my_last_spins;
volatile unsigned junk;
# define PAUSE junk *= junk; junk *= junk; junk *= junk; junk *= junk
int i;
if (GC_TRY_LOCK()) {
return;
}
junk = 0;
my_spin_max = spin_max;
my_last_spins = last_spins;
for (i = 0; i < my_spin_max; i++) {
if (GC_collecting) goto yield;
if (i < my_last_spins/2 || GC_LOCK_TAKEN) {
PAUSE;
continue;
}
if (GC_TRY_LOCK()) {
/*
* got it!
* Spinning worked. Thus we're probably not being scheduled
* against the other process with which we were contending.
* Thus it makes sense to spin longer the next time.
*/
last_spins = i;
spin_max = high_spin_max;
return;
}
}
/* We are probably being scheduled against the other process. Sleep. */
spin_max = low_spin_max;
yield:
for (i = 0;; ++i) {
if (GC_TRY_LOCK()) {
return;
}
if (i < SLEEP_THRESHOLD) {
sched_yield();
} else {
struct timespec ts;
if (i > 26) i = 26;
/* Don't wait for more than about 60msecs, even */
/* under extreme contention. */
ts.tv_sec = 0;
ts.tv_nsec = 1 << i;
nanosleep(&ts, 0);
}
}
}
# else /* !GC_IRIX_THREADS && !GC_AIX_THREADS */
#ifndef LINT
int GC_no_Irix_threads;
#endif
# endif /* IRIX_THREADS */
+838
View File
@@ -0,0 +1,838 @@
/*
* Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
* Copyright (c) 1991-1994 by Xerox Corporation. All rights reserved.
* Copyright (c) 1998-1999 by Silicon Graphics. All rights reserved.
* Copyright (c) 1999 by Hewlett-Packard Company. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* #define DEBUG */
#include <stdio.h>
#include "private/gc_priv.h"
GC_bool GC_use_entire_heap = 0;
/*
* Free heap blocks are kept on one of several free lists,
* depending on the size of the block. Each free list is doubly linked.
* Adjacent free blocks are coalesced.
*/
# define MAX_BLACK_LIST_ALLOC (2*HBLKSIZE)
/* largest block we will allocate starting on a black */
/* listed block. Must be >= HBLKSIZE. */
# define UNIQUE_THRESHOLD 32
/* Sizes up to this many HBLKs each have their own free list */
# define HUGE_THRESHOLD 256
/* Sizes of at least this many heap blocks are mapped to a */
/* single free list. */
# define FL_COMPRESSION 8
/* In between sizes map this many distinct sizes to a single */
/* bin. */
# define N_HBLK_FLS (HUGE_THRESHOLD - UNIQUE_THRESHOLD)/FL_COMPRESSION \
+ UNIQUE_THRESHOLD
struct hblk * GC_hblkfreelist[N_HBLK_FLS+1] = { 0 };
#ifndef USE_MUNMAP
word GC_free_bytes[N_HBLK_FLS+1] = { 0 };
/* Number of free bytes on each list. */
/* Is bytes + the number of free bytes on lists n .. N_HBLK_FLS */
/* > GC_max_large_allocd_bytes? */
# ifdef __GNUC__
__inline__
# endif
static GC_bool GC_enough_large_bytes_left(bytes,n)
word bytes;
int n;
{
int i;
for (i = N_HBLK_FLS; i >= n; --i) {
bytes += GC_free_bytes[i];
if (bytes > GC_max_large_allocd_bytes) return TRUE;
}
return FALSE;
}
# define INCR_FREE_BYTES(n, b) GC_free_bytes[n] += (b);
# define FREE_ASSERT(e) GC_ASSERT(e)
#else /* USE_MUNMAP */
# define INCR_FREE_BYTES(n, b)
# define FREE_ASSERT(e)
#endif /* USE_MUNMAP */
/* Map a number of blocks to the appropriate large block free list index. */
int GC_hblk_fl_from_blocks(blocks_needed)
word blocks_needed;
{
if (blocks_needed <= UNIQUE_THRESHOLD) return blocks_needed;
if (blocks_needed >= HUGE_THRESHOLD) return N_HBLK_FLS;
return (blocks_needed - UNIQUE_THRESHOLD)/FL_COMPRESSION
+ UNIQUE_THRESHOLD;
}
# define PHDR(hhdr) HDR(hhdr -> hb_prev)
# define NHDR(hhdr) HDR(hhdr -> hb_next)
# ifdef USE_MUNMAP
# define IS_MAPPED(hhdr) (((hhdr) -> hb_flags & WAS_UNMAPPED) == 0)
# else /* !USE_MMAP */
# define IS_MAPPED(hhdr) 1
# endif /* USE_MUNMAP */
# if !defined(NO_DEBUGGING)
void GC_print_hblkfreelist()
{
struct hblk * h;
word total_free = 0;
hdr * hhdr;
word sz;
int i;
for (i = 0; i <= N_HBLK_FLS; ++i) {
h = GC_hblkfreelist[i];
# ifdef USE_MUNMAP
if (0 != h) GC_printf1("Free list %ld:\n",
(unsigned long)i);
# else
if (0 != h) GC_printf2("Free list %ld (Total size %ld):\n",
(unsigned long)i,
(unsigned long)GC_free_bytes[i]);
# endif
while (h != 0) {
hhdr = HDR(h);
sz = hhdr -> hb_sz;
GC_printf2("\t0x%lx size %lu ", (unsigned long)h, (unsigned long)sz);
total_free += sz;
if (GC_is_black_listed(h, HBLKSIZE) != 0) {
GC_printf0("start black listed\n");
} else if (GC_is_black_listed(h, hhdr -> hb_sz) != 0) {
GC_printf0("partially black listed\n");
} else {
GC_printf0("not black listed\n");
}
h = hhdr -> hb_next;
}
}
# ifndef USE_MUNMAP
if (total_free != GC_large_free_bytes) {
GC_printf1("GC_large_free_bytes = %lu (INCONSISTENT!!)\n",
(unsigned long) GC_large_free_bytes);
}
# endif
GC_printf1("Total of %lu bytes on free list\n", (unsigned long)total_free);
}
/* Return the free list index on which the block described by the header */
/* appears, or -1 if it appears nowhere. */
int free_list_index_of(wanted)
hdr * wanted;
{
struct hblk * h;
hdr * hhdr;
int i;
for (i = 0; i <= N_HBLK_FLS; ++i) {
h = GC_hblkfreelist[i];
while (h != 0) {
hhdr = HDR(h);
if (hhdr == wanted) return i;
h = hhdr -> hb_next;
}
}
return -1;
}
void GC_dump_regions()
{
unsigned i;
ptr_t start, end;
ptr_t p;
size_t bytes;
hdr *hhdr;
for (i = 0; i < GC_n_heap_sects; ++i) {
start = GC_heap_sects[i].hs_start;
bytes = GC_heap_sects[i].hs_bytes;
end = start + bytes;
/* Merge in contiguous sections. */
while (i+1 < GC_n_heap_sects && GC_heap_sects[i+1].hs_start == end) {
++i;
end = GC_heap_sects[i].hs_start + GC_heap_sects[i].hs_bytes;
}
GC_printf2("***Section from 0x%lx to 0x%lx\n", start, end);
for (p = start; p < end;) {
hhdr = HDR(p);
GC_printf1("\t0x%lx ", (unsigned long)p);
if (IS_FORWARDING_ADDR_OR_NIL(hhdr)) {
GC_printf1("Missing header!!(%ld)\n", hhdr);
p += HBLKSIZE;
continue;
}
if (HBLK_IS_FREE(hhdr)) {
int correct_index = GC_hblk_fl_from_blocks(
divHBLKSZ(hhdr -> hb_sz));
int actual_index;
GC_printf1("\tfree block of size 0x%lx bytes",
(unsigned long)(hhdr -> hb_sz));
if (IS_MAPPED(hhdr)) {
GC_printf0("\n");
} else {
GC_printf0("(unmapped)\n");
}
actual_index = free_list_index_of(hhdr);
if (-1 == actual_index) {
GC_printf1("\t\tBlock not on free list %ld!!\n",
correct_index);
} else if (correct_index != actual_index) {
GC_printf2("\t\tBlock on list %ld, should be on %ld!!\n",
actual_index, correct_index);
}
p += hhdr -> hb_sz;
} else {
GC_printf1("\tused for blocks of size 0x%lx bytes\n",
(unsigned long)WORDS_TO_BYTES(hhdr -> hb_sz));
p += HBLKSIZE * OBJ_SZ_TO_BLOCKS(hhdr -> hb_sz);
}
}
}
}
# endif /* NO_DEBUGGING */
/* Initialize hdr for a block containing the indicated size and */
/* kind of objects. */
/* Return FALSE on failure. */
static GC_bool setup_header(hhdr, sz, kind, flags)
register hdr * hhdr;
word sz; /* object size in words */
int kind;
unsigned char flags;
{
register word descr;
/* Add description of valid object pointers */
if (!GC_add_map_entry(sz)) return(FALSE);
hhdr -> hb_map = GC_obj_map[sz > MAXOBJSZ? 0 : sz];
/* Set size, kind and mark proc fields */
hhdr -> hb_sz = sz;
hhdr -> hb_obj_kind = kind;
hhdr -> hb_flags = flags;
descr = GC_obj_kinds[kind].ok_descriptor;
if (GC_obj_kinds[kind].ok_relocate_descr) descr += WORDS_TO_BYTES(sz);
hhdr -> hb_descr = descr;
/* Clear mark bits */
GC_clear_hdr_marks(hhdr);
hhdr -> hb_last_reclaimed = (unsigned short)GC_gc_no;
return(TRUE);
}
#define FL_UNKNOWN -1
/*
* Remove hhdr from the appropriate free list.
* We assume it is on the nth free list, or on the size
* appropriate free list if n is FL_UNKNOWN.
*/
void GC_remove_from_fl(hhdr, n)
hdr * hhdr;
int n;
{
int index;
GC_ASSERT(((hhdr -> hb_sz) & (HBLKSIZE-1)) == 0);
# ifndef USE_MUNMAP
/* We always need index to mainatin free counts. */
if (FL_UNKNOWN == n) {
index = GC_hblk_fl_from_blocks(divHBLKSZ(hhdr -> hb_sz));
} else {
index = n;
}
# endif
if (hhdr -> hb_prev == 0) {
# ifdef USE_MUNMAP
if (FL_UNKNOWN == n) {
index = GC_hblk_fl_from_blocks(divHBLKSZ(hhdr -> hb_sz));
} else {
index = n;
}
# endif
GC_ASSERT(HDR(GC_hblkfreelist[index]) == hhdr);
GC_hblkfreelist[index] = hhdr -> hb_next;
} else {
hdr *phdr;
GET_HDR(hhdr -> hb_prev, phdr);
phdr -> hb_next = hhdr -> hb_next;
}
FREE_ASSERT(GC_free_bytes[index] >= hhdr -> hb_sz);
INCR_FREE_BYTES(index, - (signed_word)(hhdr -> hb_sz));
if (0 != hhdr -> hb_next) {
hdr * nhdr;
GC_ASSERT(!IS_FORWARDING_ADDR_OR_NIL(NHDR(hhdr)));
GET_HDR(hhdr -> hb_next, nhdr);
nhdr -> hb_prev = hhdr -> hb_prev;
}
}
/*
* Return a pointer to the free block ending just before h, if any.
*/
struct hblk * GC_free_block_ending_at(h)
struct hblk *h;
{
struct hblk * p = h - 1;
hdr * phdr;
GET_HDR(p, phdr);
while (0 != phdr && IS_FORWARDING_ADDR_OR_NIL(phdr)) {
p = FORWARDED_ADDR(p,phdr);
phdr = HDR(p);
}
if (0 != phdr) {
if(HBLK_IS_FREE(phdr)) {
return p;
} else {
return 0;
}
}
p = GC_prev_block(h - 1);
if (0 != p) {
phdr = HDR(p);
if (HBLK_IS_FREE(phdr) && (ptr_t)p + phdr -> hb_sz == (ptr_t)h) {
return p;
}
}
return 0;
}
/*
* Add hhdr to the appropriate free list.
* We maintain individual free lists sorted by address.
*/
void GC_add_to_fl(h, hhdr)
struct hblk *h;
hdr * hhdr;
{
int index = GC_hblk_fl_from_blocks(divHBLKSZ(hhdr -> hb_sz));
struct hblk *second = GC_hblkfreelist[index];
hdr * second_hdr;
# ifdef GC_ASSERTIONS
struct hblk *next = (struct hblk *)((word)h + hhdr -> hb_sz);
hdr * nexthdr = HDR(next);
struct hblk *prev = GC_free_block_ending_at(h);
hdr * prevhdr = HDR(prev);
GC_ASSERT(nexthdr == 0 || !HBLK_IS_FREE(nexthdr) || !IS_MAPPED(nexthdr));
GC_ASSERT(prev == 0 || !HBLK_IS_FREE(prevhdr) || !IS_MAPPED(prevhdr));
# endif
GC_ASSERT(((hhdr -> hb_sz) & (HBLKSIZE-1)) == 0);
GC_hblkfreelist[index] = h;
INCR_FREE_BYTES(index, hhdr -> hb_sz);
FREE_ASSERT(GC_free_bytes[index] <= GC_large_free_bytes)
hhdr -> hb_next = second;
hhdr -> hb_prev = 0;
if (0 != second) {
GET_HDR(second, second_hdr);
second_hdr -> hb_prev = h;
}
GC_invalidate_map(hhdr);
}
#ifdef USE_MUNMAP
/* Unmap blocks that haven't been recently touched. This is the only way */
/* way blocks are ever unmapped. */
void GC_unmap_old(void)
{
struct hblk * h;
hdr * hhdr;
word sz;
unsigned short last_rec, threshold;
int i;
# define UNMAP_THRESHOLD 6
for (i = 0; i <= N_HBLK_FLS; ++i) {
for (h = GC_hblkfreelist[i]; 0 != h; h = hhdr -> hb_next) {
hhdr = HDR(h);
if (!IS_MAPPED(hhdr)) continue;
threshold = (unsigned short)(GC_gc_no - UNMAP_THRESHOLD);
last_rec = hhdr -> hb_last_reclaimed;
if ((last_rec > GC_gc_no || last_rec < threshold)
&& threshold < GC_gc_no /* not recently wrapped */) {
sz = hhdr -> hb_sz;
GC_unmap((ptr_t)h, sz);
hhdr -> hb_flags |= WAS_UNMAPPED;
}
}
}
}
/* Merge all unmapped blocks that are adjacent to other free */
/* blocks. This may involve remapping, since all blocks are either */
/* fully mapped or fully unmapped. */
void GC_merge_unmapped(void)
{
struct hblk * h, *next;
hdr * hhdr, *nexthdr;
word size, nextsize;
int i;
for (i = 0; i <= N_HBLK_FLS; ++i) {
h = GC_hblkfreelist[i];
while (h != 0) {
GET_HDR(h, hhdr);
size = hhdr->hb_sz;
next = (struct hblk *)((word)h + size);
GET_HDR(next, nexthdr);
/* Coalesce with successor, if possible */
if (0 != nexthdr && HBLK_IS_FREE(nexthdr)) {
nextsize = nexthdr -> hb_sz;
if (IS_MAPPED(hhdr)) {
GC_ASSERT(!IS_MAPPED(nexthdr));
/* make both consistent, so that we can merge */
if (size > nextsize) {
GC_remap((ptr_t)next, nextsize);
} else {
GC_unmap((ptr_t)h, size);
hhdr -> hb_flags |= WAS_UNMAPPED;
}
} else if (IS_MAPPED(nexthdr)) {
GC_ASSERT(!IS_MAPPED(hhdr));
if (size > nextsize) {
GC_unmap((ptr_t)next, nextsize);
} else {
GC_remap((ptr_t)h, size);
hhdr -> hb_flags &= ~WAS_UNMAPPED;
hhdr -> hb_last_reclaimed = nexthdr -> hb_last_reclaimed;
}
} else {
/* Unmap any gap in the middle */
GC_unmap_gap((ptr_t)h, size, (ptr_t)next, nexthdr -> hb_sz);
}
/* If they are both unmapped, we merge, but leave unmapped. */
GC_remove_from_fl(hhdr, i);
GC_remove_from_fl(nexthdr, FL_UNKNOWN);
hhdr -> hb_sz += nexthdr -> hb_sz;
GC_remove_header(next);
GC_add_to_fl(h, hhdr);
/* Start over at beginning of list */
h = GC_hblkfreelist[i];
} else /* not mergable with successor */ {
h = hhdr -> hb_next;
}
} /* while (h != 0) ... */
} /* for ... */
}
#endif /* USE_MUNMAP */
/*
* Return a pointer to a block starting at h of length bytes.
* Memory for the block is mapped.
* Remove the block from its free list, and return the remainder (if any)
* to its appropriate free list.
* May fail by returning 0.
* The header for the returned block must be set up by the caller.
* If the return value is not 0, then hhdr is the header for it.
*/
struct hblk * GC_get_first_part(h, hhdr, bytes, index)
struct hblk *h;
hdr * hhdr;
word bytes;
int index;
{
word total_size = hhdr -> hb_sz;
struct hblk * rest;
hdr * rest_hdr;
GC_ASSERT((total_size & (HBLKSIZE-1)) == 0);
GC_remove_from_fl(hhdr, index);
if (total_size == bytes) return h;
rest = (struct hblk *)((word)h + bytes);
rest_hdr = GC_install_header(rest);
if (0 == rest_hdr) {
/* This may be very bad news ... */
WARN("Header allocation failed: Dropping block.\n", 0);
return(0);
}
rest_hdr -> hb_sz = total_size - bytes;
rest_hdr -> hb_flags = 0;
# ifdef GC_ASSERTIONS
/* Mark h not free, to avoid assertion about adjacent free blocks. */
hhdr -> hb_map = 0;
# endif
GC_add_to_fl(rest, rest_hdr);
return h;
}
/*
* H is a free block. N points at an address inside it.
* A new header for n has already been set up. Fix up h's header
* to reflect the fact that it is being split, move it to the
* appropriate free list.
* N replaces h in the original free list.
*
* Nhdr is not completely filled in, since it is about to allocated.
* It may in fact end up on the wrong free list for its size.
* (Hence adding it to a free list is silly. But this path is hopefully
* rare enough that it doesn't matter. The code is cleaner this way.)
*/
void GC_split_block(h, hhdr, n, nhdr, index)
struct hblk *h;
hdr * hhdr;
struct hblk *n;
hdr * nhdr;
int index; /* Index of free list */
{
word total_size = hhdr -> hb_sz;
word h_size = (word)n - (word)h;
struct hblk *prev = hhdr -> hb_prev;
struct hblk *next = hhdr -> hb_next;
/* Replace h with n on its freelist */
nhdr -> hb_prev = prev;
nhdr -> hb_next = next;
nhdr -> hb_sz = total_size - h_size;
nhdr -> hb_flags = 0;
if (0 != prev) {
HDR(prev) -> hb_next = n;
} else {
GC_hblkfreelist[index] = n;
}
if (0 != next) {
HDR(next) -> hb_prev = n;
}
INCR_FREE_BYTES(index, -(signed_word)h_size);
FREE_ASSERT(GC_free_bytes[index] > 0);
# ifdef GC_ASSERTIONS
nhdr -> hb_map = 0; /* Don't fail test for consecutive */
/* free blocks in GC_add_to_fl. */
# endif
# ifdef USE_MUNMAP
hhdr -> hb_last_reclaimed = GC_gc_no;
# endif
hhdr -> hb_sz = h_size;
GC_add_to_fl(h, hhdr);
GC_invalidate_map(nhdr);
}
struct hblk * GC_allochblk_nth();
/*
* Allocate (and return pointer to) a heap block
* for objects of size sz words, searching the nth free list.
*
* NOTE: We set obj_map field in header correctly.
* Caller is responsible for building an object freelist in block.
*
* Unlike older versions of the collectors, the client is responsible
* for clearing the block, if necessary.
*/
struct hblk *
GC_allochblk(sz, kind, flags)
word sz;
int kind;
unsigned flags; /* IGNORE_OFF_PAGE or 0 */
{
word blocks = OBJ_SZ_TO_BLOCKS(sz);
int start_list = GC_hblk_fl_from_blocks(blocks);
int i;
for (i = start_list; i <= N_HBLK_FLS; ++i) {
struct hblk * result = GC_allochblk_nth(sz, kind, flags, i);
if (0 != result) {
return result;
}
}
return 0;
}
/*
* The same, but with search restricted to nth free list.
*/
struct hblk *
GC_allochblk_nth(sz, kind, flags, n)
word sz;
int kind;
unsigned char flags; /* IGNORE_OFF_PAGE or 0 */
int n;
{
register struct hblk *hbp;
register hdr * hhdr; /* Header corr. to hbp */
register struct hblk *thishbp;
register hdr * thishdr; /* Header corr. to hbp */
signed_word size_needed; /* number of bytes in requested objects */
signed_word size_avail; /* bytes available in this block */
size_needed = HBLKSIZE * OBJ_SZ_TO_BLOCKS(sz);
/* search for a big enough block in free list */
hbp = GC_hblkfreelist[n];
for(; 0 != hbp; hbp = hhdr -> hb_next) {
GET_HDR(hbp, hhdr);
size_avail = hhdr->hb_sz;
if (size_avail < size_needed) continue;
if (size_avail != size_needed
&& !GC_use_entire_heap
&& !GC_dont_gc
&& USED_HEAP_SIZE >= GC_requested_heapsize
&& !TRUE_INCREMENTAL && GC_should_collect()) {
# ifdef USE_MUNMAP
continue;
# else
/* If we have enough large blocks left to cover any */
/* previous request for large blocks, we go ahead */
/* and split. Assuming a steady state, that should */
/* be safe. It means that we can use the full */
/* heap if we allocate only small objects. */
if (!GC_enough_large_bytes_left(GC_large_allocd_bytes, n)) {
continue;
}
/* If we are deallocating lots of memory from */
/* finalizers, fail and collect sooner rather */
/* than later. */
if (WORDS_TO_BYTES(GC_finalizer_mem_freed)
> (GC_heapsize >> 4)) {
continue;
}
# endif /* !USE_MUNMAP */
}
/* If the next heap block is obviously better, go on. */
/* This prevents us from disassembling a single large block */
/* to get tiny blocks. */
{
signed_word next_size;
thishbp = hhdr -> hb_next;
if (thishbp != 0) {
GET_HDR(thishbp, thishdr);
next_size = (signed_word)(thishdr -> hb_sz);
if (next_size < size_avail
&& next_size >= size_needed
&& !GC_is_black_listed(thishbp, (word)size_needed)) {
continue;
}
}
}
if ( !IS_UNCOLLECTABLE(kind) &&
(kind != PTRFREE || size_needed > MAX_BLACK_LIST_ALLOC)) {
struct hblk * lasthbp = hbp;
ptr_t search_end = (ptr_t)hbp + size_avail - size_needed;
signed_word orig_avail = size_avail;
signed_word eff_size_needed = ((flags & IGNORE_OFF_PAGE)?
HBLKSIZE
: size_needed);
while ((ptr_t)lasthbp <= search_end
&& (thishbp = GC_is_black_listed(lasthbp,
(word)eff_size_needed))
!= 0) {
lasthbp = thishbp;
}
size_avail -= (ptr_t)lasthbp - (ptr_t)hbp;
thishbp = lasthbp;
if (size_avail >= size_needed) {
if (thishbp != hbp &&
0 != (thishdr = GC_install_header(thishbp))) {
/* Make sure it's mapped before we mangle it. */
# ifdef USE_MUNMAP
if (!IS_MAPPED(hhdr)) {
GC_remap((ptr_t)hbp, hhdr -> hb_sz);
hhdr -> hb_flags &= ~WAS_UNMAPPED;
}
# endif
/* Split the block at thishbp */
GC_split_block(hbp, hhdr, thishbp, thishdr, n);
/* Advance to thishbp */
hbp = thishbp;
hhdr = thishdr;
/* We must now allocate thishbp, since it may */
/* be on the wrong free list. */
}
} else if (size_needed > (signed_word)BL_LIMIT
&& orig_avail - size_needed
> (signed_word)BL_LIMIT) {
/* Punt, since anything else risks unreasonable heap growth. */
if (++GC_large_alloc_warn_suppressed
>= GC_large_alloc_warn_interval) {
WARN("Repeated allocation of very large block "
"(appr. size %ld):\n"
"\tMay lead to memory leak and poor performance.\n",
size_needed);
GC_large_alloc_warn_suppressed = 0;
}
size_avail = orig_avail;
} else if (size_avail == 0 && size_needed == HBLKSIZE
&& IS_MAPPED(hhdr)) {
if (!GC_find_leak) {
static unsigned count = 0;
/* The block is completely blacklisted. We need */
/* to drop some such blocks, since otherwise we spend */
/* all our time traversing them if pointerfree */
/* blocks are unpopular. */
/* A dropped block will be reconsidered at next GC. */
if ((++count & 3) == 0) {
/* Allocate and drop the block in small chunks, to */
/* maximize the chance that we will recover some */
/* later. */
word total_size = hhdr -> hb_sz;
struct hblk * limit = hbp + divHBLKSZ(total_size);
struct hblk * h;
struct hblk * prev = hhdr -> hb_prev;
GC_words_wasted += BYTES_TO_WORDS(total_size);
GC_large_free_bytes -= total_size;
GC_remove_from_fl(hhdr, n);
for (h = hbp; h < limit; h++) {
if (h == hbp || 0 != (hhdr = GC_install_header(h))) {
(void) setup_header(
hhdr,
BYTES_TO_WORDS(HBLKSIZE),
PTRFREE, 0); /* Cant fail */
if (GC_debugging_started) {
BZERO(h, HBLKSIZE);
}
}
}
/* Restore hbp to point at free block */
hbp = prev;
if (0 == hbp) {
return GC_allochblk_nth(sz, kind, flags, n);
}
hhdr = HDR(hbp);
}
}
}
}
if( size_avail >= size_needed ) {
# ifdef USE_MUNMAP
if (!IS_MAPPED(hhdr)) {
GC_remap((ptr_t)hbp, hhdr -> hb_sz);
hhdr -> hb_flags &= ~WAS_UNMAPPED;
}
# endif
/* hbp may be on the wrong freelist; the parameter n */
/* is important. */
hbp = GC_get_first_part(hbp, hhdr, size_needed, n);
break;
}
}
if (0 == hbp) return 0;
/* Add it to map of valid blocks */
if (!GC_install_counts(hbp, (word)size_needed)) return(0);
/* This leaks memory under very rare conditions. */
/* Set up header */
if (!setup_header(hhdr, sz, kind, flags)) {
GC_remove_counts(hbp, (word)size_needed);
return(0); /* ditto */
}
/* Notify virtual dirty bit implementation that we are about to write. */
/* Ensure that pointerfree objects are not protected if it's avoidable. */
GC_remove_protection(hbp, divHBLKSZ(size_needed),
(hhdr -> hb_descr == 0) /* pointer-free */);
/* We just successfully allocated a block. Restart count of */
/* consecutive failures. */
{
extern unsigned GC_fail_count;
GC_fail_count = 0;
}
GC_large_free_bytes -= size_needed;
GC_ASSERT(IS_MAPPED(hhdr));
return( hbp );
}
struct hblk * GC_freehblk_ptr = 0; /* Search position hint for GC_freehblk */
/*
* Free a heap block.
*
* Coalesce the block with its neighbors if possible.
*
* All mark words are assumed to be cleared.
*/
void
GC_freehblk(hbp)
struct hblk *hbp;
{
struct hblk *next, *prev;
hdr *hhdr, *prevhdr, *nexthdr;
signed_word size;
GET_HDR(hbp, hhdr);
size = hhdr->hb_sz;
size = HBLKSIZE * OBJ_SZ_TO_BLOCKS(size);
GC_remove_counts(hbp, (word)size);
hhdr->hb_sz = size;
# ifdef USE_MUNMAP
hhdr -> hb_last_reclaimed = GC_gc_no;
# endif
/* Check for duplicate deallocation in the easy case */
if (HBLK_IS_FREE(hhdr)) {
GC_printf1("Duplicate large block deallocation of 0x%lx\n",
(unsigned long) hbp);
ABORT("Duplicate large block deallocation");
}
GC_ASSERT(IS_MAPPED(hhdr));
GC_invalidate_map(hhdr);
next = (struct hblk *)((word)hbp + size);
GET_HDR(next, nexthdr);
prev = GC_free_block_ending_at(hbp);
/* Coalesce with successor, if possible */
if(0 != nexthdr && HBLK_IS_FREE(nexthdr) && IS_MAPPED(nexthdr)) {
GC_remove_from_fl(nexthdr, FL_UNKNOWN);
hhdr -> hb_sz += nexthdr -> hb_sz;
GC_remove_header(next);
}
/* Coalesce with predecessor, if possible. */
if (0 != prev) {
prevhdr = HDR(prev);
if (IS_MAPPED(prevhdr)) {
GC_remove_from_fl(prevhdr, FL_UNKNOWN);
prevhdr -> hb_sz += hhdr -> hb_sz;
# ifdef USE_MUNMAP
prevhdr -> hb_last_reclaimed = GC_gc_no;
# endif
GC_remove_header(hbp);
hbp = prev;
hhdr = prevhdr;
}
}
/* FIXME: It is not clear we really always want to do these merges */
/* with -DUSE_MUNMAP, since it updates ages and hence prevents */
/* unmapping. */
GC_large_free_bytes += size;
GC_add_to_fl(hbp, hhdr);
}
+1145
View File
File diff suppressed because it is too large. Load diff
+86
View File
@@ -0,0 +1,86 @@
.arch ev6
.text
.align 4
.globl GC_push_regs
.ent GC_push_regs 2
GC_push_regs:
ldgp $gp, 0($27)
lda $sp, -16($sp)
stq $26, 0($sp)
.mask 0x04000000, 0
.frame $sp, 16, $26, 0
/* $0 integer result */
/* $1-$8 temp regs - not preserved cross calls */
/* $9-$15 call saved regs */
/* $16-$21 argument regs - not preserved cross calls */
/* $22-$28 temp regs - not preserved cross calls */
/* $29 global pointer - not preserved cross calls */
/* $30 stack pointer */
# define call_push(x) \
mov x, $16; \
jsr $26, GC_push_one; \
ldgp $gp, 0($26)
call_push($9)
call_push($10)
call_push($11)
call_push($12)
call_push($13)
call_push($14)
call_push($15)
/* $f0-$f1 floating point results */
/* $f2-$f9 call saved regs */
/* $f10-$f30 temp regs - not preserved cross calls */
/* Use the most efficient transfer method for this hardware. */
/* Bit 1 detects the FIX extension, which includes ftoit. */
amask 2, $0
bne $0, $use_stack
#undef call_push
#define call_push(x) \
ftoit x, $16; \
jsr $26, GC_push_one; \
ldgp $gp, 0($26)
call_push($f2)
call_push($f3)
call_push($f4)
call_push($f5)
call_push($f6)
call_push($f7)
call_push($f8)
call_push($f9)
ldq $26, 0($sp)
lda $sp, 16($sp)
ret $31, ($26), 1
.align 4
$use_stack:
#undef call_push
#define call_push(x) \
stt x, 8($sp); \
ldq $16, 8($sp); \
jsr $26, GC_push_one; \
ldgp $gp, 0($26)
call_push($f2)
call_push($f3)
call_push($f4)
call_push($f5)
call_push($f6)
call_push($f7)
call_push($f8)
call_push($f9)
ldq $26, 0($sp)
lda $sp, 16($sp)
ret $31, ($26), 1
.end GC_push_regs
+123
View File
@@ -0,0 +1,123 @@
#!/bin/sh
# Run this to generate all the initial makefiles, etc.
# Ripped off from GNOME macros version
DIE=0
srcdir=`dirname $0`
test -z "$srcdir" && srcdir=.
(autoconf --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`autoconf' installed to compile Mono."
echo "Download the appropriate package for your distribution,"
echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
DIE=1
}
if [ -z "$LIBTOOLIZE" ]; then
LIBTOOLIZE=`which glibtoolize 2>/dev/null`
if [ ! -x "$LIBTOOLIZE" ]; then
LIBTOOLIZE=`which libtoolize`
fi
fi
(grep "^AM_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) && {
($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`libtoolize' installed to compile Mono."
echo "Get ftp://ftp.gnu.org/gnu/libtool/libtool-1.2.tar.gz"
echo "(or a newer version if it is available)"
DIE=1
}
}
grep "^AM_GNU_GETTEXT" $srcdir/configure.ac >/dev/null && {
grep "sed.*POTFILES" $srcdir/configure.ac >/dev/null || \
(gettext --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`gettext' installed to compile Mono."
echo "Get ftp://alpha.gnu.org/gnu/gettext-0.10.35.tar.gz"
echo "(or a newer version if it is available)"
DIE=1
}
}
(automake --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: You must have \`automake' installed to compile Mono."
echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
echo "(or a newer version if it is available)"
DIE=1
NO_AUTOMAKE=yes
}
# if no automake, don't bother testing for aclocal
test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
echo
echo "**Error**: Missing \`aclocal'. The version of \`automake'"
echo "installed doesn't appear recent enough."
echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
echo "(or a newer version if it is available)"
DIE=1
}
if test "$DIE" -eq 1; then
exit 1
fi
if test x$NOCONFIGURE = x && test -z "$*"; then
echo "**Warning**: I am going to run \`configure' with no arguments."
echo "If you wish to pass any to it, please specify them on the"
echo \`$0\'" command line."
echo
fi
am_opt="--add-missing --copy --gnu -Wno-obsolete"
case $CC in
xlc )
am_opt="$am_opt --include-deps";;
esac
if grep "^AC_PROG_LIBTOOL" configure.ac >/dev/null; then
if test -z "$NO_LIBTOOLIZE" ; then
echo "Running libtoolize..."
$LIBTOOLIZE --force --copy
fi
fi
ACLOCAL_FLAGS="$ACLOCAL_FLAGS -Wnone"
echo "Running aclocal $ACLOCAL_FLAGS ..."
aclocal $ACLOCAL_FLAGS || {
echo
echo "**Error**: aclocal failed. This may mean that you have not"
echo "installed all of the packages you need, or you may need to"
echo "set ACLOCAL_FLAGS to include \"-I \$prefix/share/aclocal\""
echo "for the prefix where you installed the packages whose"
echo "macros were not found"
exit 1
}
if grep "^AC_CONFIG_HEADERS" configure.ac >/dev/null; then
echo "Running autoheader..."
autoheader || { echo "**Error**: autoheader failed."; exit 1; }
fi
echo "Running automake $am_opt ..."
automake $am_opt ||
{ echo "**Error**: automake failed."; exit 1; }
echo "Running autoconf ..."
autoconf || { echo "**Error**: autoconf failed."; exit 1; }
conf_flags="--enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c
if test x$NOCONFIGURE = x; then
echo Running $srcdir/configure $conf_flags "$@" ...
$srcdir/configure $conf_flags "$@" \
&& echo Now type \`make\' to compile $PKG_NAME || exit 1
else
echo Skipping configure process.
fi
+467
View File
@@ -0,0 +1,467 @@
/*
* Copyright (c) 2001 by Hewlett-Packard Company. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*
*/
/*
* This implements a full, though not well-tuned, representation of the
* backwards points-to graph. This is used to test for non-GC-robust
* data structures; the code is not used during normal garbage collection.
*
* One restriction is that we drop all back-edges from nodes with very
* high in-degree, and simply add them add them to a list of such
* nodes. They are then treated as permanent roots. Id this by itself
* doesn't introduce a space leak, then such nodes can't contribute to
* a growing space leak.
*/
#ifdef MAKE_BACK_GRAPH
#define MAX_IN 10 /* Maximum in-degree we handle directly */
#include "private/dbg_mlc.h"
#include <unistd.h>
#if !defined(DBG_HDRS_ALL) || (ALIGNMENT != CPP_WORDSZ/8) || !defined(UNIX_LIKE)
# error Configuration doesnt support MAKE_BACK_GRAPH
#endif
/* We store single back pointers directly in the object's oh_bg_ptr field. */
/* If there is more than one ptr to an object, we store q | FLAG_MANY, */
/* where q is a pointer to a back_edges object. */
/* Every once in a while we use a back_edges object even for a single */
/* pointer, since we need the other fields in the back_edges structure to */
/* be present in some fraction of the objects. Otherwise we get serious */
/* performance issues. */
#define FLAG_MANY 2
typedef struct back_edges_struct {
word n_edges; /* Number of edges, including those in continuation */
/* structures. */
unsigned short flags;
# define RETAIN 1 /* Directly points to a reachable object; */
/* retain for next GC. */
unsigned short height_gc_no;
/* If height > 0, then the GC_gc_no value when it */
/* was computed. If it was computed this cycle, then */
/* it is current. If it was computed during the */
/* last cycle, then it represents the old height, */
/* which is only saved for live objects referenced by */
/* dead ones. This may grow due to refs from newly */
/* dead objects. */
signed_word height;
/* Longest path through unreachable nodes to this node */
/* that we found using depth first search. */
# define HEIGHT_UNKNOWN ((signed_word)(-2))
# define HEIGHT_IN_PROGRESS ((signed_word)(-1))
ptr_t edges[MAX_IN];
struct back_edges_struct *cont;
/* Pointer to continuation structure; we use only the */
/* edges field in the continuation. */
/* also used as free list link. */
} back_edges;
/* Allocate a new back edge structure. Should be more sophisticated */
/* if this were production code. */
#define MAX_BACK_EDGE_STRUCTS 100000
static back_edges *back_edge_space = 0;
int GC_n_back_edge_structs = 0; /* Serves as pointer to never used */
/* back_edges space. */
static back_edges *avail_back_edges = 0;
/* Pointer to free list of deallocated */
/* back_edges structures. */
static back_edges * new_back_edges(void)
{
if (0 == back_edge_space) {
back_edge_space = (back_edges *)
GET_MEM(MAX_BACK_EDGE_STRUCTS*sizeof(back_edges));
}
if (0 != avail_back_edges) {
back_edges * result = avail_back_edges;
avail_back_edges = result -> cont;
result -> cont = 0;
return result;
}
if (GC_n_back_edge_structs >= MAX_BACK_EDGE_STRUCTS - 1) {
ABORT("needed too much space for back edges: adjust "
"MAX_BACK_EDGE_STRUCTS");
}
return back_edge_space + (GC_n_back_edge_structs++);
}
/* Deallocate p and its associated continuation structures. */
static void deallocate_back_edges(back_edges *p)
{
back_edges *last = p;
while (0 != last -> cont) last = last -> cont;
last -> cont = avail_back_edges;
avail_back_edges = p;
}
/* Table of objects that are currently on the depth-first search */
/* stack. Only objects with in-degree one are in this table. */
/* Other objects are identified using HEIGHT_IN_PROGRESS. */
/* FIXME: This data structure NEEDS IMPROVEMENT. */
#define INITIAL_IN_PROGRESS 10000
static ptr_t * in_progress_space = 0;
static size_t in_progress_size = 0;
static size_t n_in_progress = 0;
static void push_in_progress(ptr_t p)
{
if (n_in_progress >= in_progress_size)
if (in_progress_size == 0) {
in_progress_size = INITIAL_IN_PROGRESS;
in_progress_space = (ptr_t *)GET_MEM(in_progress_size * sizeof(ptr_t));
} else {
ptr_t * new_in_progress_space;
in_progress_size *= 2;
new_in_progress_space = (ptr_t *)
GET_MEM(in_progress_size * sizeof(ptr_t));
BCOPY(in_progress_space, new_in_progress_space,
n_in_progress * sizeof(ptr_t));
in_progress_space = new_in_progress_space;
/* FIXME: This just drops the old space. */
}
if (in_progress_space == 0)
ABORT("MAKE_BACK_GRAPH: Out of in-progress space: "
"Huge linear data structure?");
in_progress_space[n_in_progress++] = p;
}
static GC_bool is_in_progress(ptr_t p)
{
int i;
for (i = 0; i < n_in_progress; ++i) {
if (in_progress_space[i] == p) return TRUE;
}
return FALSE;
}
static void pop_in_progress(ptr_t p)
{
--n_in_progress;
GC_ASSERT(in_progress_space[n_in_progress] == p);
}
#define GET_OH_BG_PTR(p) \
(ptr_t)REVEAL_POINTER(((oh *)(p)) -> oh_bg_ptr)
#define SET_OH_BG_PTR(p,q) (((oh *)(p)) -> oh_bg_ptr) = HIDE_POINTER(q)
/* Execute s once for each predecessor q of p in the points-to graph. */
/* s should be a bracketed statement. We declare q. */
#define FOR_EACH_PRED(q, p, s) \
{ \
ptr_t q = GET_OH_BG_PTR(p); \
if (!((word)q & FLAG_MANY)) { \
if (q && !((word)q & 1)) s \
/* !((word)q & 1) checks for a misnterpreted freelist link */ \
} else { \
back_edges *orig_be_ = (back_edges *)((word)q & ~FLAG_MANY); \
back_edges *be_ = orig_be_; \
int total_, local_; \
int n_edges_ = be_ -> n_edges; \
for (total_ = 0, local_ = 0; total_ < n_edges_; ++local_, ++total_) { \
if (local_ == MAX_IN) { \
be_ = be_ -> cont; \
local_ = 0; \
} \
q = be_ -> edges[local_]; s \
} \
} \
}
/* Ensure that p has a back_edges structure associated with it. */
static void ensure_struct(ptr_t p)
{
ptr_t old_back_ptr = GET_OH_BG_PTR(p);
if (!((word)old_back_ptr & FLAG_MANY)) {
back_edges *be = new_back_edges();
be -> flags = 0;
if (0 == old_back_ptr) {
be -> n_edges = 0;
} else {
be -> n_edges = 1;
be -> edges[0] = old_back_ptr;
}
be -> height = HEIGHT_UNKNOWN;
be -> height_gc_no = GC_gc_no - 1;
GC_ASSERT(be >= back_edge_space);
SET_OH_BG_PTR(p, (word)be | FLAG_MANY);
}
}
/* Add the (forward) edge from p to q to the backward graph. Both p */
/* q are pointers to the object base, i.e. pointers to an oh. */
static void add_edge(ptr_t p, ptr_t q)
{
ptr_t old_back_ptr = GET_OH_BG_PTR(q);
back_edges * be, *be_cont;
word i;
static unsigned random_number = 13;
# define GOT_LUCKY_NUMBER (((++random_number) & 0x7f) == 0)
/* A not very random number we use to occasionally allocate a */
/* back_edges structure even for a single backward edge. This */
/* prevents us from repeatedly tracing back through very long */
/* chains, since we will have some place to store height and */
/* in_progress flags along the way. */
GC_ASSERT(p == GC_base(p) && q == GC_base(q));
if (!GC_HAS_DEBUG_INFO(q) || !GC_HAS_DEBUG_INFO(p)) {
/* This is really a misinterpreted free list link, since we saw */
/* a pointer to a free list. Dont overwrite it! */
return;
}
if (0 == old_back_ptr) {
SET_OH_BG_PTR(q, p);
if (GOT_LUCKY_NUMBER) ensure_struct(q);
return;
}
/* Check whether it was already in the list of predecessors. */
FOR_EACH_PRED(pred, q, { if (p == pred) return; });
ensure_struct(q);
old_back_ptr = GET_OH_BG_PTR(q);
be = (back_edges *)((word)old_back_ptr & ~FLAG_MANY);
for (i = be -> n_edges, be_cont = be; i > MAX_IN;
be_cont = be_cont -> cont, i -= MAX_IN) {}
if (i == MAX_IN) {
be_cont -> cont = new_back_edges();
be_cont = be_cont -> cont;
i = 0;
}
be_cont -> edges[i] = p;
be -> n_edges++;
if (be -> n_edges == 100) {
# if 0
if (GC_print_stats) {
GC_err_printf0("The following object has in-degree >= 100:\n");
GC_print_heap_obj(q);
}
# endif
}
}
typedef void (*per_object_func)(ptr_t p, word n_words, word gc_descr);
static void per_object_helper(struct hblk *h, word fn)
{
hdr * hhdr = HDR(h);
word sz = hhdr -> hb_sz;
word descr = hhdr -> hb_descr;
per_object_func f = (per_object_func)fn;
int i = 0;
do {
f((ptr_t)(h -> hb_body + i), sz, descr);
i += sz;
} while (i + sz <= BYTES_TO_WORDS(HBLKSIZE));
}
void GC_apply_to_each_object(per_object_func f)
{
GC_apply_to_all_blocks(per_object_helper, (word)f);
}
static void reset_back_edge(ptr_t p, word n_words, word gc_descr)
{
/* Skip any free list links, or dropped blocks */
if (GC_HAS_DEBUG_INFO(p)) {
ptr_t old_back_ptr = GET_OH_BG_PTR(p);
if ((word)old_back_ptr & FLAG_MANY) {
back_edges *be = (back_edges *)((word)old_back_ptr & ~FLAG_MANY);
if (!(be -> flags & RETAIN)) {
deallocate_back_edges(be);
SET_OH_BG_PTR(p, 0);
} else {
word *currentp;
GC_ASSERT(GC_is_marked(p));
/* Back edges may point to objects that will not be retained. */
/* Delete them for now, but remember the height. */
/* Some will be added back at next GC. */
be -> n_edges = 0;
if (0 != be -> cont) {
deallocate_back_edges(be -> cont);
be -> cont = 0;
}
GC_ASSERT(GC_is_marked(p));
/* We only retain things for one GC cycle at a time. */
be -> flags &= ~RETAIN;
}
} else /* Simple back pointer */ {
/* Clear to avoid dangling pointer. */
SET_OH_BG_PTR(p, 0);
}
}
}
static void add_back_edges(ptr_t p, word n_words, word gc_descr)
{
word *currentp = (word *)(p + sizeof(oh));
/* For now, fix up non-length descriptors conservatively. */
if((gc_descr & GC_DS_TAGS) != GC_DS_LENGTH) {
gc_descr = WORDS_TO_BYTES(n_words);
}
while (currentp < (word *)(p + gc_descr)) {
word current = *currentp++;
FIXUP_POINTER(current);
if (current >= (word)GC_least_plausible_heap_addr &&
current <= (word)GC_greatest_plausible_heap_addr) {
ptr_t target = GC_base((GC_PTR)current);
if (0 != target) {
add_edge(p, target);
}
}
}
}
/* Rebuild the representation of the backward reachability graph. */
/* Does not examine mark bits. Can be called before GC. */
void GC_build_back_graph(void)
{
GC_apply_to_each_object(add_back_edges);
}
/* Return an approximation to the length of the longest simple path */
/* through unreachable objects to p. We refer to this as the height */
/* of p. */
static word backwards_height(ptr_t p)
{
word result;
ptr_t back_ptr = GET_OH_BG_PTR(p);
back_edges *be;
if (0 == back_ptr) return 1;
if (!((word)back_ptr & FLAG_MANY)) {
if (is_in_progress(p)) return 0; /* DFS back edge, i.e. we followed */
/* an edge to an object already */
/* on our stack: ignore */
push_in_progress(p);
result = backwards_height(back_ptr)+1;
pop_in_progress(p);
return result;
}
be = (back_edges *)((word)back_ptr & ~FLAG_MANY);
if (be -> height >= 0 && be -> height_gc_no == GC_gc_no)
return be -> height;
/* Ignore back edges in DFS */
if (be -> height == HEIGHT_IN_PROGRESS) return 0;
result = (be -> height > 0? be -> height : 1);
be -> height = HEIGHT_IN_PROGRESS;
FOR_EACH_PRED(q, p, {
word this_height;
if (GC_is_marked(q) && !(FLAG_MANY & (word)GET_OH_BG_PTR(p))) {
if (GC_print_stats)
GC_printf2("Found bogus pointer from 0x%lx to 0x%lx\n", q, p);
/* Reachable object "points to" unreachable one. */
/* Could be caused by our lax treatment of GC descriptors. */
this_height = 1;
} else {
this_height = backwards_height(q);
}
if (this_height >= result) result = this_height + 1;
});
be -> height = result;
be -> height_gc_no = GC_gc_no;
return result;
}
word GC_max_height;
ptr_t GC_deepest_obj;
/* Compute the maximum height of every unreachable predecessor p of a */
/* reachable object. Arrange to save the heights of all such objects p */
/* so that they can be used in calculating the height of objects in the */
/* next GC. */
/* Set GC_max_height to be the maximum height we encounter, and */
/* GC_deepest_obj to be the corresponding object. */
static void update_max_height(ptr_t p, word n_words, word gc_descr)
{
if (GC_is_marked(p) && GC_HAS_DEBUG_INFO(p)) {
int i;
word p_height = 0;
ptr_t p_deepest_obj = 0;
ptr_t back_ptr;
back_edges *be = 0;
/* If we remembered a height last time, use it as a minimum. */
/* It may have increased due to newly unreachable chains pointing */
/* to p, but it can't have decreased. */
back_ptr = GET_OH_BG_PTR(p);
if (0 != back_ptr && ((word)back_ptr & FLAG_MANY)) {
be = (back_edges *)((word)back_ptr & ~FLAG_MANY);
if (be -> height != HEIGHT_UNKNOWN) p_height = be -> height;
}
FOR_EACH_PRED(q, p, {
if (!GC_is_marked(q) && GC_HAS_DEBUG_INFO(q)) {
word q_height;
q_height = backwards_height(q);
if (q_height > p_height) {
p_height = q_height;
p_deepest_obj = q;
}
}
});
if (p_height > 0) {
/* Remember the height for next time. */
if (be == 0) {
ensure_struct(p);
back_ptr = GET_OH_BG_PTR(p);
be = (back_edges *)((word)back_ptr & ~FLAG_MANY);
}
be -> flags |= RETAIN;
be -> height = p_height;
be -> height_gc_no = GC_gc_no;
}
if (p_height > GC_max_height) {
GC_max_height = p_height;
GC_deepest_obj = p_deepest_obj;
}
}
}
word GC_max_max_height = 0;
void GC_traverse_back_graph(void)
{
GC_max_height = 0;
GC_apply_to_each_object(update_max_height);
}
void GC_print_back_graph_stats(void)
{
GC_printf2("Maximum backwards height of reachable objects at GC %lu is %ld\n",
(unsigned long) GC_gc_no, GC_max_height);
if (GC_max_height > GC_max_max_height) {
GC_max_max_height = GC_max_height;
GC_printf0("The following unreachable object is last in a longest chain "
"of unreachable objects:\n");
GC_print_heap_obj(GC_deepest_obj);
}
if (GC_print_stats) {
GC_printf1("Needed max total of %ld back-edge structs\n",
GC_n_back_edge_structs);
}
GC_apply_to_each_object(reset_back_edge);
GC_deepest_obj = 0;
}
#endif /* MAKE_BACK_GRAPH */
+300
View File
@@ -0,0 +1,300 @@
/*
* Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
* Copyright (c) 1991-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, August 9, 1995 6:09 pm PDT */
# include "private/gc_priv.h"
/*
* We maintain several hash tables of hblks that have had false hits.
* Each contains one bit per hash bucket; If any page in the bucket
* has had a false hit, we assume that all of them have.
* See the definition of page_hash_table in gc_private.h.
* False hits from the stack(s) are much more dangerous than false hits
* from elsewhere, since the former can pin a large object that spans the
* block, even though it does not start on the dangerous block.
*/
/*
* Externally callable routines are:
* GC_add_to_black_list_normal
* GC_add_to_black_list_stack
* GC_promote_black_lists
* GC_is_black_listed
*
* All require that the allocator lock is held.
*/
/* Pointers to individual tables. We replace one table by another by */
/* switching these pointers. */
word * GC_old_normal_bl;
/* Nonstack false references seen at last full */
/* collection. */
word * GC_incomplete_normal_bl;
/* Nonstack false references seen since last */
/* full collection. */
word * GC_old_stack_bl;
word * GC_incomplete_stack_bl;
word GC_total_stack_black_listed;
word GC_black_list_spacing = MINHINCR*HBLKSIZE; /* Initial rough guess */
void GC_clear_bl();
# if defined(__STDC__) || defined(__cplusplus)
void GC_default_print_heap_obj_proc(ptr_t p)
# else
void GC_default_print_heap_obj_proc(p)
ptr_t p;
# endif
{
ptr_t base = GC_base(p);
GC_err_printf2("start: 0x%lx, appr. length: %ld", base, GC_size(base));
}
void (*GC_print_heap_obj) GC_PROTO((ptr_t p)) =
GC_default_print_heap_obj_proc;
void GC_print_source_ptr(p)
ptr_t p;
{
ptr_t base = GC_base(p);
if (0 == base) {
if (0 == p) {
GC_err_printf0("in register");
} else {
GC_err_printf0("in root set");
}
} else {
GC_err_printf0("in object at ");
(*GC_print_heap_obj)(base);
}
}
void GC_bl_init()
{
if (!GC_all_interior_pointers) {
GC_old_normal_bl = (word *)
GC_scratch_alloc((word)(sizeof (page_hash_table)));
GC_incomplete_normal_bl = (word *)GC_scratch_alloc
((word)(sizeof(page_hash_table)));
if (GC_old_normal_bl == 0 || GC_incomplete_normal_bl == 0) {
GC_err_printf0("Insufficient memory for black list\n");
EXIT();
}
GC_clear_bl(GC_old_normal_bl);
GC_clear_bl(GC_incomplete_normal_bl);
}
GC_old_stack_bl = (word *)GC_scratch_alloc((word)(sizeof(page_hash_table)));
GC_incomplete_stack_bl = (word *)GC_scratch_alloc
((word)(sizeof(page_hash_table)));
if (GC_old_stack_bl == 0 || GC_incomplete_stack_bl == 0) {
GC_err_printf0("Insufficient memory for black list\n");
EXIT();
}
GC_clear_bl(GC_old_stack_bl);
GC_clear_bl(GC_incomplete_stack_bl);
}
void GC_clear_bl(doomed)
word *doomed;
{
BZERO(doomed, sizeof(page_hash_table));
}
void GC_copy_bl(old, new)
word *new, *old;
{
BCOPY(old, new, sizeof(page_hash_table));
}
static word total_stack_black_listed();
/* Signal the completion of a collection. Turn the incomplete black */
/* lists into new black lists, etc. */
void GC_promote_black_lists()
{
word * very_old_normal_bl = GC_old_normal_bl;
word * very_old_stack_bl = GC_old_stack_bl;
GC_old_normal_bl = GC_incomplete_normal_bl;
GC_old_stack_bl = GC_incomplete_stack_bl;
if (!GC_all_interior_pointers) {
GC_clear_bl(very_old_normal_bl);
}
GC_clear_bl(very_old_stack_bl);
GC_incomplete_normal_bl = very_old_normal_bl;
GC_incomplete_stack_bl = very_old_stack_bl;
GC_total_stack_black_listed = total_stack_black_listed();
# ifdef PRINTSTATS
GC_printf1("%ld bytes in heap blacklisted for interior pointers\n",
(unsigned long)GC_total_stack_black_listed);
# endif
if (GC_total_stack_black_listed != 0) {
GC_black_list_spacing =
HBLKSIZE*(GC_heapsize/GC_total_stack_black_listed);
}
if (GC_black_list_spacing < 3 * HBLKSIZE) {
GC_black_list_spacing = 3 * HBLKSIZE;
}
if (GC_black_list_spacing > MAXHINCR * HBLKSIZE) {
GC_black_list_spacing = MAXHINCR * HBLKSIZE;
/* Makes it easier to allocate really huge blocks, which otherwise */
/* may have problems with nonuniform blacklist distributions. */
/* This way we should always succeed immediately after growing the */
/* heap. */
}
}
void GC_unpromote_black_lists()
{
if (!GC_all_interior_pointers) {
GC_copy_bl(GC_old_normal_bl, GC_incomplete_normal_bl);
}
GC_copy_bl(GC_old_stack_bl, GC_incomplete_stack_bl);
}
/* P is not a valid pointer reference, but it falls inside */
/* the plausible heap bounds. */
/* Add it to the normal incomplete black list if appropriate. */
#ifdef PRINT_BLACK_LIST
void GC_add_to_black_list_normal(p, source)
ptr_t source;
#else
void GC_add_to_black_list_normal(p)
#endif
word p;
{
if (!(GC_modws_valid_offsets[p & (sizeof(word)-1)])) return;
{
register int index = PHT_HASH(p);
if (HDR(p) == 0 || get_pht_entry_from_index(GC_old_normal_bl, index)) {
# ifdef PRINT_BLACK_LIST
if (!get_pht_entry_from_index(GC_incomplete_normal_bl, index)) {
GC_err_printf2(
"Black listing (normal) 0x%lx referenced from 0x%lx ",
(unsigned long) p, (unsigned long) source);
GC_print_source_ptr(source);
GC_err_puts("\n");
}
# endif
set_pht_entry_from_index(GC_incomplete_normal_bl, index);
} /* else this is probably just an interior pointer to an allocated */
/* object, and isn't worth black listing. */
}
}
/* And the same for false pointers from the stack. */
#ifdef PRINT_BLACK_LIST
void GC_add_to_black_list_stack(p, source)
ptr_t source;
#else
void GC_add_to_black_list_stack(p)
#endif
word p;
{
register int index = PHT_HASH(p);
if (HDR(p) == 0 || get_pht_entry_from_index(GC_old_stack_bl, index)) {
# ifdef PRINT_BLACK_LIST
if (!get_pht_entry_from_index(GC_incomplete_stack_bl, index)) {
GC_err_printf2(
"Black listing (stack) 0x%lx referenced from 0x%lx ",
(unsigned long)p, (unsigned long)source);
GC_print_source_ptr(source);
GC_err_puts("\n");
}
# endif
set_pht_entry_from_index(GC_incomplete_stack_bl, index);
}
}
/*
* Is the block starting at h of size len bytes black listed? If so,
* return the address of the next plausible r such that (r, len) might not
* be black listed. (R may not actually be in the heap. We guarantee only
* that every smaller value of r after h is also black listed.)
* If (h,len) is not black listed, return 0.
* Knows about the structure of the black list hash tables.
*/
struct hblk * GC_is_black_listed(h, len)
struct hblk * h;
word len;
{
register int index = PHT_HASH((word)h);
register word i;
word nblocks = divHBLKSZ(len);
if (!GC_all_interior_pointers) {
if (get_pht_entry_from_index(GC_old_normal_bl, index)
|| get_pht_entry_from_index(GC_incomplete_normal_bl, index)) {
return(h+1);
}
}
for (i = 0; ; ) {
if (GC_old_stack_bl[divWORDSZ(index)] == 0
&& GC_incomplete_stack_bl[divWORDSZ(index)] == 0) {
/* An easy case */
i += WORDSZ - modWORDSZ(index);
} else {
if (get_pht_entry_from_index(GC_old_stack_bl, index)
|| get_pht_entry_from_index(GC_incomplete_stack_bl, index)) {
return(h+i+1);
}
i++;
}
if (i >= nblocks) break;
index = PHT_HASH((word)(h+i));
}
return(0);
}
/* Return the number of blacklisted blocks in a given range. */
/* Used only for statistical purposes. */
/* Looks only at the GC_incomplete_stack_bl. */
word GC_number_stack_black_listed(start, endp1)
struct hblk *start, *endp1;
{
register struct hblk * h;
word result = 0;
for (h = start; h < endp1; h++) {
register int index = PHT_HASH((word)h);
if (get_pht_entry_from_index(GC_old_stack_bl, index)) result++;
}
return(result);
}
/* Return the total number of (stack) black-listed bytes. */
static word total_stack_black_listed()
{
register unsigned i;
word total = 0;
for (i = 0; i < GC_n_heap_sects; i++) {
struct hblk * start = (struct hblk *) GC_heap_sects[i].hs_start;
word len = (word) GC_heap_sects[i].hs_bytes;
struct hblk * endp1 = start + len/HBLKSIZE;
total += GC_number_stack_black_listed(start, endp1);
}
return(total * HBLKSIZE);
}
+4
View File
@@ -0,0 +1,4 @@
#!/bin/sh
GC_DEBUG=1
export GC_DEBUG
$* 2>&1 | awk '{print "0x3e=c\""$0"\""};/^\t##PC##=/ {if ($2 != 0) {print $2"?i"}}' | adb $1 | sed "s/^ >/>/"
+199
View File
@@ -0,0 +1,199 @@
/*
* Copyright (c) 1992-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, March 29, 1995 12:51 pm PST */
# ifdef CHECKSUMS
# include "private/gc_priv.h"
/* This is debugging code intended to verify the results of dirty bit */
/* computations. Works only in a single threaded environment. */
/* We assume that stubborn objects are changed only when they are */
/* enabled for writing. (Certain kinds of writing are actually */
/* safe under other conditions.) */
# define NSUMS 10000
# define OFFSET 0x10000
typedef struct {
GC_bool new_valid;
word old_sum;
word new_sum;
struct hblk * block; /* Block to which this refers + OFFSET */
/* to hide it from collector. */
} page_entry;
page_entry GC_sums [NSUMS];
word GC_checksum(h)
struct hblk *h;
{
register word *p = (word *)h;
register word *lim = (word *)(h+1);
register word result = 0;
while (p < lim) {
result += *p++;
}
return(result | 0x80000000 /* doesn't look like pointer */);
}
# ifdef STUBBORN_ALLOC
/* Check whether a stubborn object from the given block appears on */
/* the appropriate free list. */
GC_bool GC_on_free_list(h)
struct hblk *h;
{
register hdr * hhdr = HDR(h);
register int sz = hhdr -> hb_sz;
ptr_t p;
if (sz > MAXOBJSZ) return(FALSE);
for (p = GC_sobjfreelist[sz]; p != 0; p = obj_link(p)) {
if (HBLKPTR(p) == h) return(TRUE);
}
return(FALSE);
}
# endif
int GC_n_dirty_errors;
int GC_n_changed_errors;
int GC_n_clean;
int GC_n_dirty;
void GC_update_check_page(h, index)
struct hblk *h;
int index;
{
page_entry *pe = GC_sums + index;
register hdr * hhdr = HDR(h);
struct hblk *b;
if (pe -> block != 0 && pe -> block != h + OFFSET) ABORT("goofed");
pe -> old_sum = pe -> new_sum;
pe -> new_sum = GC_checksum(h);
# if !defined(MSWIN32) && !defined(MSWINCE)
if (pe -> new_sum != 0x80000000 && !GC_page_was_ever_dirty(h)) {
GC_printf1("GC_page_was_ever_dirty(0x%lx) is wrong\n",
(unsigned long)h);
}
# endif
if (GC_page_was_dirty(h)) {
GC_n_dirty++;
} else {
GC_n_clean++;
}
b = h;
while (IS_FORWARDING_ADDR_OR_NIL(hhdr) && hhdr != 0) {
b -= (word)hhdr;
hhdr = HDR(b);
}
if (pe -> new_valid
&& hhdr != 0 && hhdr -> hb_descr != 0 /* may contain pointers */
&& pe -> old_sum != pe -> new_sum) {
if (!GC_page_was_dirty(h) || !GC_page_was_ever_dirty(h)) {
/* Set breakpoint here */GC_n_dirty_errors++;
}
# ifdef STUBBORN_ALLOC
if ( hhdr -> hb_map != GC_invalid_map
&& hhdr -> hb_obj_kind == STUBBORN
&& !GC_page_was_changed(h)
&& !GC_on_free_list(h)) {
/* if GC_on_free_list(h) then reclaim may have touched it */
/* without any allocations taking place. */
/* Set breakpoint here */GC_n_changed_errors++;
}
# endif
}
pe -> new_valid = TRUE;
pe -> block = h + OFFSET;
}
word GC_bytes_in_used_blocks;
void GC_add_block(h, dummy)
struct hblk *h;
word dummy;
{
register hdr * hhdr = HDR(h);
register bytes = WORDS_TO_BYTES(hhdr -> hb_sz);
bytes += HBLKSIZE-1;
bytes &= ~(HBLKSIZE-1);
GC_bytes_in_used_blocks += bytes;
}
void GC_check_blocks()
{
word bytes_in_free_blocks = GC_large_free_bytes;
GC_bytes_in_used_blocks = 0;
GC_apply_to_all_blocks(GC_add_block, (word)0);
GC_printf2("GC_bytes_in_used_blocks = %ld, bytes_in_free_blocks = %ld ",
GC_bytes_in_used_blocks, bytes_in_free_blocks);
GC_printf1("GC_heapsize = %ld\n", GC_heapsize);
if (GC_bytes_in_used_blocks + bytes_in_free_blocks != GC_heapsize) {
GC_printf0("LOST SOME BLOCKS!!\n");
}
}
/* Should be called immediately after GC_read_dirty and GC_read_changed. */
void GC_check_dirty()
{
register int index;
register unsigned i;
register struct hblk *h;
register ptr_t start;
GC_check_blocks();
GC_n_dirty_errors = 0;
GC_n_changed_errors = 0;
GC_n_clean = 0;
GC_n_dirty = 0;
index = 0;
for (i = 0; i < GC_n_heap_sects; i++) {
start = GC_heap_sects[i].hs_start;
for (h = (struct hblk *)start;
h < (struct hblk *)(start + GC_heap_sects[i].hs_bytes);
h++) {
GC_update_check_page(h, index);
index++;
if (index >= NSUMS) goto out;
}
}
out:
GC_printf2("Checked %lu clean and %lu dirty pages\n",
(unsigned long) GC_n_clean, (unsigned long) GC_n_dirty);
if (GC_n_dirty_errors > 0) {
GC_printf1("Found %lu dirty bit errors\n",
(unsigned long)GC_n_dirty_errors);
}
if (GC_n_changed_errors > 0) {
GC_printf1("Found %lu changed bit errors\n",
(unsigned long)GC_n_changed_errors);
GC_printf0("These may be benign (provoked by nonpointer changes)\n");
# ifdef THREADS
GC_printf0(
"Also expect 1 per thread currently allocating a stubborn obj.\n");
# endif
}
}
# else
extern int GC_quiet;
/* ANSI C doesn't allow translation units to be empty. */
/* So we guarantee this one is nonempty. */
# endif /* CHECKSUMS */
+569
View File
@@ -0,0 +1,569 @@
# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
#
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
# OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
#
# Permission is hereby granted to use or copy this program
# for any purpose, provided the above notices are retained on all copies.
# Permission to modify the code and to distribute modified code is granted,
# provided the above notices are retained, and a notice that the code was
# modified is included with the above copyright notice.
#
# Original author: Tom Tromey
# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
dnl Process this file with autoconf to produce configure.
AC_PREREQ([2.53])
AC_INIT([libgc-mono], [6.6], [[email protected]])
AM_INIT_AUTOMAKE([1.9 no-define foreign])
AC_CONFIG_SRCDIR(gcj_mlc.c)
AC_CONFIG_MACRO_DIR([m4])
AC_CANONICAL_HOST
AC_SUBST(PACKAGE)
AC_SUBST(GC_VERSION)
AC_PROG_CC
AC_PROG_CXX
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
dnl automake 1.6 and later need the AM_PROG_AS macro.
ifdef([AM_PROG_AS],[AM_PROG_AS],[])
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :) # :)
AC_PROG_INSTALL
AM_MAINTAINER_MODE
. [$]{srcdir}/configure.host
# We use a separate variable to pass down CPPFLAGS and CFLAGS from the main mono
# configure, because of autoconf brokeness
if test "x$CPPFLAGS_FOR_LIBGC" != "x"; then
CPPFLAGS=$CPPFLAGS_FOR_LIBGC
fi
if test "x$CFLAGS_FOR_LIBGC" != "x"; then
CFLAGS=$CFLAGS_FOR_LIBGC
fi
GC_CFLAGS=${gc_cflags}
AC_SUBST(GC_CFLAGS)
case $enable_embed_check in
no) ;;
*) AC_MSG_ERROR([This module is now part of 'mono' and cannot be built as a stand-alone module any longer.]) ;;
esac
THREADS=$with_libgc_threads
AC_ARG_ENABLE(win32-dllmain,
[ --enable-win32-dllmain Define the DllMain function in win32_threads.c even if the collector is not built as a dll],
)
AC_ARG_ENABLE(parallel-mark,
[ --enable-parallel-mark parallelize marking and free list construction],
[case "$THREADS" in
no | none | single)
AC_MSG_ERROR([Parallel mark requires --enable-threads=x spec])
;;
esac]
)
AC_ARG_ENABLE(cplusplus,
[ --enable-cplusplus install C++ support],
)
AM_CPPFLAGS=-I${srcdir}/include
THREADDLLIBS=
## Libraries needed to support dynamic loading and/or threads.
case "$THREADS" in
no | none | single)
THREADS=none
;;
posix | pthreads)
THREADS=posix
AC_CHECK_LIB(pthread, pthread_self, THREADDLLIBS="-lpthread",,)
case "$host" in
x86-*-linux* | ia64-*-linux* | i386-*-linux* | i486-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* | alpha*-*-linux* | s390*-*-linux* | sparc*-*-linux* | powerpc-*-linux*)
AC_DEFINE(GC_LINUX_THREADS)
AC_DEFINE(_REENTRANT)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
;;
*-*-linux* | *-*-nacl*)
AC_DEFINE(GC_LINUX_THREADS)
AC_DEFINE(_REENTRANT)
;;
*-*-aix*)
AC_DEFINE(GC_AIX_THREADS)
AC_DEFINE(_REENTRANT)
;;
*-*-haiku*)
AC_DEFINE(GC_HAIKU_THREADS)
AC_DEFINE(_REENTRANT)
;;
*-*-hpux*)
AC_MSG_WARN("Only HP/UX 11 threads are supported.")
AC_DEFINE(GC_HPUX_THREADS)
AC_DEFINE(_POSIX_C_SOURCE,199506L)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
THREADDLLIBS="-lpthread -lrt"
;;
*-*-kfreebsd*-gnu)
AC_DEFINE(GC_FREEBSD_THREADS)
INCLUDES="$INCLUDES -pthread"
THREADDLLIBS=-pthread
AC_DEFINE(_REENTRANT)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
AC_DEFINE(USE_COMPILER_TLS)
;;
*-*-freebsd*)
AC_DEFINE(GC_FREEBSD_THREADS)
if test "x$PTHREAD_CFLAGS" != "x"; then
AM_CPPFLAGS="$AM_CPPFLAGS $PTHREAD_CFLAGS"
fi
if test "x$PTHREAD_LIBS" = "x"; then
THREADDLLIBS=-pthread
else
THREADDLLIBS="$PTHREAD_LIBS"
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
;;
*-*-solaris*)
AC_DEFINE(GC_SOLARIS_THREADS)
AC_DEFINE(GC_SOLARIS_PTHREADS)
;;
*-*-irix*)
AC_DEFINE(GC_IRIX_THREADS)
;;
*-*-cygwin*)
AC_DEFINE(GC_WIN32_THREADS)
;;
*-*-darwin*)
AC_DEFINE(GC_DARWIN_THREADS)
AC_DEFINE(THREAD_LOCAL_ALLOC)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
;;
*-*-netbsd*)
AC_DEFINE(GC_NETBSD_THREADS)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
;;
*-*-openbsd*)
AC_DEFINE(GC_OPENBSD_THREADS)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
;;
*-*-osf*)
AC_DEFINE(GC_OSF1_THREADS)
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
AC_DEFINE(THREAD_LOCAL_ALLOC)
# May want to enable it in other cases, too.
# Measurements havent yet been done.
fi
AM_CPPFLAGS="$AM_CPPFLAGS -pthread"
THREADDLLIBS="-lpthread -lrt"
;;
*)
AC_MSG_ERROR("Pthreads not supported by the GC on this platform.")
;;
esac
;;
win32)
AC_DEFINE(GC_WIN32_THREADS)
dnl Wine getenv may not return NULL for missing entry
AC_DEFINE(NO_GETENV)
if test "${enable_win32_dllmain}" = yes; then
AC_DEFINE(GC_INSIDE_DLL)
fi
;;
dgux386)
THREADS=dgux386
AC_MSG_RESULT($THREADDLLIBS)
# Use pthread GCC switch
THREADDLLIBS=-pthread
if test "${enable_parallel_mark}" = yes; then
AC_DEFINE(PARALLEL_MARK)
fi
AC_DEFINE(THREAD_LOCAL_ALLOC)
AC_DEFINE(GC_DGUX386_THREADS)
AC_DEFINE(DGUX_THREADS)
# Enable _POSIX4A_DRAFT10_SOURCE with flag -pthread
AM_CPPFLAGS="-pthread $AM_CPPFLAGS"
;;
aix)
THREADS=posix
THREADDLLIBS=-lpthread
AC_DEFINE(GC_AIX_THREADS)
AC_DEFINE(_REENTRANT)
;;
decosf1 | irix | mach | os2 | solaris | dce | vxworks)
AC_MSG_ERROR(thread package $THREADS not yet supported)
;;
*)
AC_MSG_ERROR($THREADS is an unknown thread package)
;;
esac
AC_SUBST(THREADDLLIBS)
case "$host" in
powerpc-*-darwin*)
powerpc_darwin=true
;;
esac
AM_CONDITIONAL(POWERPC_DARWIN,test x$powerpc_darwin = xtrue)
# Check if the GCC builtin __sync_bool_compare_and_swap is available.
# It is preferred in gc_locks.h for PPC as GCC 4.4 has a problem with the inline assembly there.
AC_MSG_CHECKING(for __sync_bool_compare_and_swap)
AC_TRY_COMPILE([],[
volatile unsigned int foo = 0;
unsigned int r1 = __sync_bool_compare_and_swap(&foo, 0, 1);
return 0;
], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAS___SYNC_BOOL_COMPARE_AND_SWAP)
], [
AC_MSG_RESULT(no)
])
AC_MSG_CHECKING(for xlc)
AC_TRY_COMPILE([],[
#ifndef __xlC__
# error
#endif
], [compiler_xlc=yes], [compiler_xlc=no])
AC_MSG_RESULT($compiler_xlc)
AM_CONDITIONAL(COMPILER_XLC,test $compiler_xlc = yes)
if test $compiler_xlc = yes -a "$powerpc_darwin" = true; then
# the darwin stack-frame-walking code is completely broken on xlc
AC_DEFINE(DARWIN_DONT_PARSE_STACK)
fi
# We never want libdl on darwin. It is a fake libdl that just ends up making
# dyld calls anyway
case "$host" in
*-*-darwin*) ;;
*)
AC_CHECK_LIB(dl, dlopen, THREADDLLIBS="$THREADDLLIBS -ldl")
;;
esac
AC_SUBST(EXTRA_TEST_LIBS)
target_all=libgc.la
AC_SUBST(target_all)
dnl If the target is an eCos system, use the appropriate eCos
dnl I/O routines.
dnl FIXME: this should not be a local option but a global target
dnl system; at present there is no eCos target.
TARGET_ECOS="no"
AC_ARG_WITH(ecos,
[ --with-ecos enable runtime eCos target support],
TARGET_ECOS="$with_ecos"
)
addobjs=
addlibs=
addincludes=
addtests=
CXXAM_CPPFLAGS=
case "$TARGET_ECOS" in
no)
;;
*)
AC_DEFINE(ECOS)
CXXINCLUDES="-I${TARGET_ECOS}/include"
addobjs="$addobjs ecos.lo"
;;
esac
if test "${enable_cplusplus}" = yes; then
addincludes="$addincludes include/gc_cpp.h include/gc_allocator.h"
addtests="$addtests test_cpp"
fi
AM_CONDITIONAL(CPLUSPLUS, test "${enable_cplusplus}" = yes)
AC_SUBST(CXX)
AC_SUBST(AM_CPPFLAGS)
AC_SUBST(CXXINCLUDES)
# Configuration of shared libraries
#
AC_MSG_CHECKING(whether to build shared libraries)
AC_ENABLE_SHARED
case "$host" in
alpha-*-openbsd*)
enable_shared=no
AC_MSG_RESULT(no)
;;
*)
AC_MSG_RESULT(yes)
;;
esac
# Configuration of machine-dependent code
#
AC_MSG_CHECKING(which machine-dependent code should be used)
machdep=
case "$host" in
alpha-*-openbsd*)
machdep="alpha_mach_dep.lo"
if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
AC_MSG_WARN(OpenBSD/Alpha without dlopen(). Shared library support is disabled)
fi
;;
alpha*-*-linux*)
machdep="alpha_mach_dep.lo"
;;
i?86-*-solaris2.[[89]] | i?86-*-solaris2.1?)
AC_DEFINE(SOLARIS25_PROC_VDB_BUG_FIXED)
;;
mipstx39-*-elf*)
machdep="mips_ultrix_mach_dep.lo"
AC_DEFINE(STACKBASE, __stackbase)
AC_DEFINE(DATASTART_IS_ETEXT)
;;
mips-dec-ultrix*)
machdep="mips_ultrix_mach-dep.lo"
;;
mips-nec-sysv*|mips-unknown-sysv*)
;;
mips*-*-linux*)
;;
mips-*-*)
machdep="mips_sgi_mach_dep.lo"
AC_DEFINE(NO_EXECUTE_PERMISSION)
;;
sparc-*-netbsd*)
machdep="sparc_netbsd_mach_dep.lo"
;;
sparc-sun-solaris2.3)
machdep="sparc_mach_dep.lo"
AC_DEFINE(SUNOS53_SHARED_LIB)
;;
sparc*-sun-solaris2.*)
machdep="sparc_mach_dep.lo"
;;
ia64-*-*)
machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
target_ia64=true
;;
*-*-nacl*)
AC_DEFINE(NO_EXECUTE_PERMISSION)
;;
esac
if test x"$machdep" = x; then
AC_MSG_RESULT($machdep)
machdep="mach_dep.lo"
fi
addobjs="$addobjs $machdep"
#
# Adding object files directly to _LIBADD breaks -j builds, so we need to add the sources
# instead, but _SOURCES can't contain autoconf substitutions, so add them using automake
# conditionals.
#
#AC_SUBST(addobjs)
AC_SUBST(addincludes)
AC_SUBST(addlibs)
AC_SUBST(addtests)
AM_CONDITIONAL(TARGET_IA64,test x$target_ia64 = xtrue)
AC_PROG_LIBTOOL
# Use dolt (http://dolt.freedesktop.org/) instead of libtool for building.
DOLT
#
# Check for AViiON Machines running DGUX
#
ac_is_dgux=no
AC_CHECK_HEADER(sys/dg_sys_info.h,
[ac_is_dgux=yes;])
## :GOTCHA: we do not check anything but sys/dg_sys_info.h
if test $ac_is_dgux = yes; then
if test "$enable_full_debug" = "yes"; then
CFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
CXXFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
else
CFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
CXXFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2"
fi
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
fi
dnl We use these options to decide which functions to include.
AC_ARG_WITH(target-subdir,
[ --with-target-subdir=SUBDIR
configuring with a cross compiler])
AC_ARG_WITH(cross-host,
[ --with-cross-host=HOST configuring with a cross compiler])
# automake wants to see AC_EXEEXT. But we don't need it. And having
# it is actually a problem, because the compiler we're passed can't
# necessarily do a full link. So we fool automake here.
if false; then
# autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
# to nothing, so nothing would remain between `then' and `fi' if it
# were not for the `:' below.
:
AC_EXEEXT
fi
AC_MSG_CHECKING([for threads package to use])
AC_MSG_RESULT($THREADS)
dnl As of 4.13a2, the collector will not properly work on Solaris when
dnl built with gcc and -O. So we remove -O in the appropriate case.
dnl Not needed anymore on Solaris.
AC_MSG_CHECKING(whether Solaris gcc optimization fix is necessary)
case "$host" in
*aix*)
if test "$GCC" = yes; then
AC_MSG_RESULT(yes)
new_CFLAGS=
for i in $CFLAGS; do
case "$i" in
-O*)
;;
*)
new_CFLAGS="$new_CFLAGS $i"
;;
esac
done
CFLAGS="$new_CFLAGS"
else
AC_MSG_RESULT(no)
fi
;;
*) AC_MSG_RESULT(no) ;;
esac
dnl We need to override the top-level CFLAGS. This is how we do it.
MY_CFLAGS="$CFLAGS"
AC_SUBST(MY_CFLAGS)
dnl Include defines that have become de facto standard.
dnl ALL_INTERIOR_POINTERS can be overridden in startup code.
AC_DEFINE(SILENT)
AC_DEFINE(NO_SIGNALS)
AC_DEFINE(NO_EXECUTE_PERMISSION)
dnl AC_DEFINE(ALL_INTERIOR_POINTERS)
dnl By default, make the library as general as possible.
AC_DEFINE(JAVA_FINALIZATION)
AC_DEFINE(GC_GCJ_SUPPORT)
AC_DEFINE(ATOMIC_UNCOLLECTABLE)
dnl This is something of a hack. When cross-compiling we turn off
dnl some functionality. We also enable the "small" configuration.
dnl These is only correct when targetting an embedded system. FIXME.
if test -n "${with_cross_host}"; then
AC_DEFINE(NO_SIGSET)
AC_DEFINE(NO_CLOCK)
AC_DEFINE(SMALL_CONFIG)
AC_DEFINE(NO_DEBUGGING)
fi
UNWINDLIBS=
AC_ARG_ENABLE(full-debug,
[ --enable-full-debug include full support for pointer backtracing etc.],
[ if test "$enable_full_debug" = "yes"; then
AC_MSG_WARN("Should define GC_DEBUG and use debug alloc. in clients.")
AC_DEFINE(KEEP_BACK_PTRS)
AC_DEFINE(DBG_HDRS_ALL)
case $host in
ia64-*-linux* )
AC_DEFINE(MAKE_BACK_GRAPH)
AC_DEFINE(SAVE_CALL_COUNT, 8)
AC_CHECK_LIB(unwind, backtrace, [
AC_DEFINE(GC_HAVE_BUILTIN_BACKTRACE)
UNWINDLIBS=-lunwind
AC_MSG_WARN("Client code may need to link against libunwind.")
])
;;
x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
AC_DEFINE(MAKE_BACK_GRAPH)
AC_MSG_WARN("Client must not use -fomit-frame-pointer.")
AC_DEFINE(SAVE_CALL_COUNT, 8)
;;
i[3456]86-*-dgux*)
AC_DEFINE(MAKE_BACK_GRAPH)
;;
esac ]
fi)
AC_SUBST(UNWINDLIBS)
AC_ARG_ENABLE(redirect-malloc,
[ --enable-redirect-malloc redirect malloc and friends to GC routines])
if test "${enable_redirect_malloc}" = yes; then
if test "${enable_full_debug}" = yes; then
AC_DEFINE(REDIRECT_MALLOC, GC_debug_malloc_replacement)
AC_DEFINE(REDIRECT_REALLOC, GC_debug_realloc_replacement)
AC_DEFINE(REDIRECT_FREE, GC_debug_free)
else
AC_DEFINE(REDIRECT_MALLOC, GC_malloc)
fi
fi
AC_DEFINE(_IN_LIBGC)
AC_ARG_ENABLE(gc-assertions,
[ --enable-gc-assertions collector-internal assertion checking])
if test "${enable_gc_assertions}" = yes; then
AC_DEFINE(GC_ASSERTIONS)
fi
AC_ARG_ENABLE(quiet-build, [ --enable-quiet-build Enable quiet libgc build (on by default)], enable_quiet_build=$enableval, enable_quiet_build=yes)
AM_CONDITIONAL(USE_LIBDIR, test -z "$with_cross_host")
AC_ARG_ENABLE(werror, [ --enable-werror Pass -Werror to the C compiler], werror_flag=$enableval, werror_flag=no)
if test x$werror_flag = xyes; then
WERROR_CFLAGS="-Werror"
fi
AC_SUBST([WERROR_CFLAGS])
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
else
multilib_arg=
fi
AC_OUTPUT(Makefile
m4/Makefile
include/Makefile
include/private/Makefile
doc/Makefile,,
srcdir=${srcdir}
host=${host}
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
CC="${CC}"
DEFS="$DEFS"
)
+59
View File
@@ -0,0 +1,59 @@
# configure.host
# This shell script handles all host based configuration for the garbage
# collector.
# It sets various shell variables based on the the host and the
# configuration options. You can modify this shell script without
# needing to rerun autoconf.
# This shell script should be invoked as
# . configure.host
# If it encounters an error, it will exit with a message.
# It uses the following shell variables:
# host The configuration host
# host_cpu The configuration host CPU
# target_optspace --enable-target-optspace ("yes", "no", "")
# GCC should be "yes" if using gcc
# It sets the following shell variables:
# gc_cflags Special CFLAGS to use when building
gc_cflags=""
if test :"$GCC": = :yes: ; then
:
else
case "$host" in
hppa*-*-hpux* )
if test :$GCC: != :"yes": ; then
gc_cflags="${gc_flags} +ESdbgasm"
fi
# :TODO: actaully we should check using Autoconf if
# the compiler supports this option.
;;
esac
fi
case "${target_optspace}:${host}" in
yes:*)
gc_cflags="${gc_cflags} -Os"
;;
:m32r-* | :d10v-* | :d30v-*)
gc_cflags="${gc_cflags} -Os"
;;
no:* | :*)
# Nothing.
;;
esac
# Set any host dependent compiler flags.
# THIS TABLE IS SORTED. KEEP IT THAT WAY.
case "${host}" in
mips-tx39-*|mipstx39-unknown-*)
gc_cflags="${gc_cflags} -G 0"
;;
*)
;;
esac
+919
View File
@@ -0,0 +1,919 @@
/*
* Copyright (c) 1993-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*
* Author: Hans-J. Boehm ([email protected])
*/
/* Boehm, October 3, 1994 5:19 pm PDT */
# include "gc.h"
# include "cord.h"
# include <stdlib.h>
# include <stdio.h>
# include <string.h>
/* An implementation of the cord primitives. These are the only */
/* Functions that understand the representation. We perform only */
/* minimal checks on arguments to these functions. Out of bounds */
/* arguments to the iteration functions may result in client functions */
/* invoked on garbage data. In most cases, client functions should be */
/* programmed defensively enough that this does not result in memory */
/* smashes. */
typedef void (* oom_fn)(void);
oom_fn CORD_oom_fn = (oom_fn) 0;
# define OUT_OF_MEMORY { if (CORD_oom_fn != (oom_fn) 0) (*CORD_oom_fn)(); \
ABORT("Out of memory\n"); }
# define ABORT(msg) { fprintf(stderr, "%s\n", msg); abort(); }
typedef unsigned long word;
typedef union {
struct Concatenation {
char null;
char header;
char depth; /* concatenation nesting depth. */
unsigned char left_len;
/* Length of left child if it is sufficiently */
/* short; 0 otherwise. */
# define MAX_LEFT_LEN 255
word len;
CORD left; /* length(left) > 0 */
CORD right; /* length(right) > 0 */
} concatenation;
struct Function {
char null;
char header;
char depth; /* always 0 */
char left_len; /* always 0 */
word len;
CORD_fn fn;
void * client_data;
} function;
struct Generic {
char null;
char header;
char depth;
char left_len;
word len;
} generic;
char string[1];
} CordRep;
# define CONCAT_HDR 1
# define FN_HDR 4
# define SUBSTR_HDR 6
/* Substring nodes are a special case of function nodes. */
/* The client_data field is known to point to a substr_args */
/* structure, and the function is either CORD_apply_access_fn */
/* or CORD_index_access_fn. */
/* The following may be applied only to function and concatenation nodes: */
#define IS_CONCATENATION(s) (((CordRep *)s)->generic.header == CONCAT_HDR)
#define IS_FUNCTION(s) ((((CordRep *)s)->generic.header & FN_HDR) != 0)
#define IS_SUBSTR(s) (((CordRep *)s)->generic.header == SUBSTR_HDR)
#define LEN(s) (((CordRep *)s) -> generic.len)
#define DEPTH(s) (((CordRep *)s) -> generic.depth)
#define GEN_LEN(s) (CORD_IS_STRING(s) ? strlen(s) : LEN(s))
#define LEFT_LEN(c) ((c) -> left_len != 0? \
(c) -> left_len \
: (CORD_IS_STRING((c) -> left) ? \
(c) -> len - GEN_LEN((c) -> right) \
: LEN((c) -> left)))
#define SHORT_LIMIT (sizeof(CordRep) - 1)
/* Cords shorter than this are C strings */
/* Dump the internal representation of x to stdout, with initial */
/* indentation level n. */
void CORD_dump_inner(CORD x, unsigned n)
{
register size_t i;
for (i = 0; i < (size_t)n; i++) {
fputs(" ", stdout);
}
if (x == 0) {
fputs("NIL\n", stdout);
} else if (CORD_IS_STRING(x)) {
for (i = 0; i <= SHORT_LIMIT; i++) {
if (x[i] == '\0') break;
putchar(x[i]);
}
if (x[i] != '\0') fputs("...", stdout);
putchar('\n');
} else if (IS_CONCATENATION(x)) {
register struct Concatenation * conc =
&(((CordRep *)x) -> concatenation);
printf("Concatenation: %p (len: %d, depth: %d)\n",
x, (int)(conc -> len), (int)(conc -> depth));
CORD_dump_inner(conc -> left, n+1);
CORD_dump_inner(conc -> right, n+1);
} else /* function */{
register struct Function * func =
&(((CordRep *)x) -> function);
if (IS_SUBSTR(x)) printf("(Substring) ");
printf("Function: %p (len: %d): ", x, (int)(func -> len));
for (i = 0; i < 20 && i < func -> len; i++) {
putchar((*(func -> fn))(i, func -> client_data));
}
if (i < func -> len) fputs("...", stdout);
putchar('\n');
}
}
/* Dump the internal representation of x to stdout */
void CORD_dump(CORD x)
{
CORD_dump_inner(x, 0);
fflush(stdout);
}
CORD CORD_cat_char_star(CORD x, const char * y, size_t leny)
{
register size_t result_len;
register size_t lenx;
register int depth;
if (x == CORD_EMPTY) return(y);
if (leny == 0) return(x);
if (CORD_IS_STRING(x)) {
lenx = strlen(x);
result_len = lenx + leny;
if (result_len <= SHORT_LIMIT) {
register char * result = GC_MALLOC_ATOMIC(result_len+1);
if (result == 0) OUT_OF_MEMORY;
memcpy(result, x, lenx);
memcpy(result + lenx, y, leny);
result[result_len] = '\0';
return((CORD) result);
} else {
depth = 1;
}
} else {
register CORD right;
register CORD left;
register char * new_right;
register size_t right_len;
lenx = LEN(x);
if (leny <= SHORT_LIMIT/2
&& IS_CONCATENATION(x)
&& CORD_IS_STRING(right = ((CordRep *)x) -> concatenation.right)) {
/* Merge y into right part of x. */
if (!CORD_IS_STRING(left = ((CordRep *)x) -> concatenation.left)) {
right_len = lenx - LEN(left);
} else if (((CordRep *)x) -> concatenation.left_len != 0) {
right_len = lenx - ((CordRep *)x) -> concatenation.left_len;
} else {
right_len = strlen(right);
}
result_len = right_len + leny; /* length of new_right */
if (result_len <= SHORT_LIMIT) {
new_right = GC_MALLOC_ATOMIC(result_len + 1);
memcpy(new_right, right, right_len);
memcpy(new_right + right_len, y, leny);
new_right[result_len] = '\0';
y = new_right;
leny = result_len;
x = left;
lenx -= right_len;
/* Now fall through to concatenate the two pieces: */
}
if (CORD_IS_STRING(x)) {
depth = 1;
} else {
depth = DEPTH(x) + 1;
}
} else {
depth = DEPTH(x) + 1;
}
result_len = lenx + leny;
}
{
/* The general case; lenx, result_len is known: */
register struct Concatenation * result;
result = GC_NEW(struct Concatenation);
if (result == 0) OUT_OF_MEMORY;
result->header = CONCAT_HDR;
result->depth = depth;
if (lenx <= MAX_LEFT_LEN) result->left_len = lenx;
result->len = result_len;
result->left = x;
result->right = y;
if (depth >= MAX_DEPTH) {
return(CORD_balance((CORD)result));
} else {
return((CORD) result);
}
}
}
CORD CORD_cat(CORD x, CORD y)
{
register size_t result_len;
register int depth;
register size_t lenx;
if (x == CORD_EMPTY) return(y);
if (y == CORD_EMPTY) return(x);
if (CORD_IS_STRING(y)) {
return(CORD_cat_char_star(x, y, strlen(y)));
} else if (CORD_IS_STRING(x)) {
lenx = strlen(x);
depth = DEPTH(y) + 1;
} else {
register int depthy = DEPTH(y);
lenx = LEN(x);
depth = DEPTH(x) + 1;
if (depthy >= depth) depth = depthy + 1;
}
result_len = lenx + LEN(y);
{
register struct Concatenation * result;
result = GC_NEW(struct Concatenation);
if (result == 0) OUT_OF_MEMORY;
result->header = CONCAT_HDR;
result->depth = depth;
if (lenx <= MAX_LEFT_LEN) result->left_len = lenx;
result->len = result_len;
result->left = x;
result->right = y;
if (depth >= MAX_DEPTH) {
return(CORD_balance((CORD)result));
} else {
return((CORD) result);
}
}
}
CORD CORD_from_fn(CORD_fn fn, void * client_data, size_t len)
{
if (len <= 0) return(0);
if (len <= SHORT_LIMIT) {
register char * result;
register size_t i;
char buf[SHORT_LIMIT+1];
register char c;
for (i = 0; i < len; i++) {
c = (*fn)(i, client_data);
if (c == '\0') goto gen_case;
buf[i] = c;
}
buf[i] = '\0';
result = GC_MALLOC_ATOMIC(len+1);
if (result == 0) OUT_OF_MEMORY;
strcpy(result, buf);
result[len] = '\0';
return((CORD) result);
}
gen_case:
{
register struct Function * result;
result = GC_NEW(struct Function);
if (result == 0) OUT_OF_MEMORY;
result->header = FN_HDR;
/* depth is already 0 */
result->len = len;
result->fn = fn;
result->client_data = client_data;
return((CORD) result);
}
}
size_t CORD_len(CORD x)
{
if (x == 0) {
return(0);
} else {
return(GEN_LEN(x));
}
}
struct substr_args {
CordRep * sa_cord;
size_t sa_index;
};
char CORD_index_access_fn(size_t i, void * client_data)
{
register struct substr_args *descr = (struct substr_args *)client_data;
return(((char *)(descr->sa_cord))[i + descr->sa_index]);
}
char CORD_apply_access_fn(size_t i, void * client_data)
{
register struct substr_args *descr = (struct substr_args *)client_data;
register struct Function * fn_cord = &(descr->sa_cord->function);
return((*(fn_cord->fn))(i + descr->sa_index, fn_cord->client_data));
}
/* A version of CORD_substr that simply returns a function node, thus */
/* postponing its work. The fourth argument is a function that may */
/* be used for efficient access to the ith character. */
/* Assumes i >= 0 and i + n < length(x). */
CORD CORD_substr_closure(CORD x, size_t i, size_t n, CORD_fn f)
{
register struct substr_args * sa = GC_NEW(struct substr_args);
CORD result;
if (sa == 0) OUT_OF_MEMORY;
sa->sa_cord = (CordRep *)x;
sa->sa_index = i;
result = CORD_from_fn(f, (void *)sa, n);
((CordRep *)result) -> function.header = SUBSTR_HDR;
return (result);
}
# define SUBSTR_LIMIT (10 * SHORT_LIMIT)
/* Substrings of function nodes and flat strings shorter than */
/* this are flat strings. Othewise we use a functional */
/* representation, which is significantly slower to access. */
/* A version of CORD_substr that assumes i >= 0, n > 0, and i + n < length(x).*/
CORD CORD_substr_checked(CORD x, size_t i, size_t n)
{
if (CORD_IS_STRING(x)) {
if (n > SUBSTR_LIMIT) {
return(CORD_substr_closure(x, i, n, CORD_index_access_fn));
} else {
register char * result = GC_MALLOC_ATOMIC(n+1);
if (result == 0) OUT_OF_MEMORY;
strncpy(result, x+i, n);
result[n] = '\0';
return(result);
}
} else if (IS_CONCATENATION(x)) {
register struct Concatenation * conc
= &(((CordRep *)x) -> concatenation);
register size_t left_len;
register size_t right_len;
left_len = LEFT_LEN(conc);
right_len = conc -> len - left_len;
if (i >= left_len) {
if (n == right_len) return(conc -> right);
return(CORD_substr_checked(conc -> right, i - left_len, n));
} else if (i+n <= left_len) {
if (n == left_len) return(conc -> left);
return(CORD_substr_checked(conc -> left, i, n));
} else {
/* Need at least one character from each side. */
register CORD left_part;
register CORD right_part;
register size_t left_part_len = left_len - i;
if (i == 0) {
left_part = conc -> left;
} else {
left_part = CORD_substr_checked(conc -> left, i, left_part_len);
}
if (i + n == right_len + left_len) {
right_part = conc -> right;
} else {
right_part = CORD_substr_checked(conc -> right, 0,
n - left_part_len);
}
return(CORD_cat(left_part, right_part));
}
} else /* function */ {
if (n > SUBSTR_LIMIT) {
if (IS_SUBSTR(x)) {
/* Avoid nesting substring nodes. */
register struct Function * f = &(((CordRep *)x) -> function);
register struct substr_args *descr =
(struct substr_args *)(f -> client_data);
return(CORD_substr_closure((CORD)descr->sa_cord,
i + descr->sa_index,
n, f -> fn));
} else {
return(CORD_substr_closure(x, i, n, CORD_apply_access_fn));
}
} else {
char * result;
register struct Function * f = &(((CordRep *)x) -> function);
char buf[SUBSTR_LIMIT+1];
register char * p = buf;
register char c;
register int j;
register int lim = i + n;
for (j = i; j < lim; j++) {
c = (*(f -> fn))(j, f -> client_data);
if (c == '\0') {
return(CORD_substr_closure(x, i, n, CORD_apply_access_fn));
}
*p++ = c;
}
*p = '\0';
result = GC_MALLOC_ATOMIC(n+1);
if (result == 0) OUT_OF_MEMORY;
strcpy(result, buf);
return(result);
}
}
}
CORD CORD_substr(CORD x, size_t i, size_t n)
{
register size_t len = CORD_len(x);
if (i >= len || n <= 0) return(0);
/* n < 0 is impossible in a correct C implementation, but */
/* quite possible under SunOS 4.X. */
if (i + n > len) n = len - i;
# ifndef __STDC__
if (i < 0) ABORT("CORD_substr: second arg. negative");
/* Possible only if both client and C implementation are buggy. */
/* But empirically this happens frequently. */
# endif
return(CORD_substr_checked(x, i, n));
}
/* See cord.h for definition. We assume i is in range. */
int CORD_iter5(CORD x, size_t i, CORD_iter_fn f1,
CORD_batched_iter_fn f2, void * client_data)
{
if (x == 0) return(0);
if (CORD_IS_STRING(x)) {
register const char *p = x+i;
if (*p == '\0') ABORT("2nd arg to CORD_iter5 too big");
if (f2 != CORD_NO_FN) {
return((*f2)(p, client_data));
} else {
while (*p) {
if ((*f1)(*p, client_data)) return(1);
p++;
}
return(0);
}
} else if (IS_CONCATENATION(x)) {
register struct Concatenation * conc
= &(((CordRep *)x) -> concatenation);
if (i > 0) {
register size_t left_len = LEFT_LEN(conc);
if (i >= left_len) {
return(CORD_iter5(conc -> right, i - left_len, f1, f2,
client_data));
}
}
if (CORD_iter5(conc -> left, i, f1, f2, client_data)) {
return(1);
}
return(CORD_iter5(conc -> right, 0, f1, f2, client_data));
} else /* function */ {
register struct Function * f = &(((CordRep *)x) -> function);
register size_t j;
register size_t lim = f -> len;
for (j = i; j < lim; j++) {
if ((*f1)((*(f -> fn))(j, f -> client_data), client_data)) {
return(1);
}
}
return(0);
}
}
#undef CORD_iter
int CORD_iter(CORD x, CORD_iter_fn f1, void * client_data)
{
return(CORD_iter5(x, 0, f1, CORD_NO_FN, client_data));
}
int CORD_riter4(CORD x, size_t i, CORD_iter_fn f1, void * client_data)
{
if (x == 0) return(0);
if (CORD_IS_STRING(x)) {
register const char *p = x + i;
register char c;
for(;;) {
c = *p;
if (c == '\0') ABORT("2nd arg to CORD_riter4 too big");
if ((*f1)(c, client_data)) return(1);
if (p == x) break;
p--;
}
return(0);
} else if (IS_CONCATENATION(x)) {
register struct Concatenation * conc
= &(((CordRep *)x) -> concatenation);
register CORD left_part = conc -> left;
register size_t left_len;
left_len = LEFT_LEN(conc);
if (i >= left_len) {
if (CORD_riter4(conc -> right, i - left_len, f1, client_data)) {
return(1);
}
return(CORD_riter4(left_part, left_len - 1, f1, client_data));
} else {
return(CORD_riter4(left_part, i, f1, client_data));
}
} else /* function */ {
register struct Function * f = &(((CordRep *)x) -> function);
register size_t j;
for (j = i; ; j--) {
if ((*f1)((*(f -> fn))(j, f -> client_data), client_data)) {
return(1);
}
if (j == 0) return(0);
}
}
}
int CORD_riter(CORD x, CORD_iter_fn f1, void * client_data)
{
return(CORD_riter4(x, CORD_len(x) - 1, f1, client_data));
}
/*
* The following functions are concerned with balancing cords.
* Strategy:
* Scan the cord from left to right, keeping the cord scanned so far
* as a forest of balanced trees of exponentialy decreasing length.
* When a new subtree needs to be added to the forest, we concatenate all
* shorter ones to the new tree in the appropriate order, and then insert
* the result into the forest.
* Crucial invariants:
* 1. The concatenation of the forest (in decreasing order) with the
* unscanned part of the rope is equal to the rope being balanced.
* 2. All trees in the forest are balanced.
* 3. forest[i] has depth at most i.
*/
typedef struct {
CORD c;
size_t len; /* Actual length of c */
} ForestElement;
static size_t min_len [ MAX_DEPTH ];
static int min_len_init = 0;
int CORD_max_len;
typedef ForestElement Forest [ MAX_DEPTH ];
/* forest[i].len >= fib(i+1) */
/* The string is the concatenation */
/* of the forest in order of DECREASING */
/* indices. */
void CORD_init_min_len()
{
register int i;
register size_t last, previous, current;
min_len[0] = previous = 1;
min_len[1] = last = 2;
for (i = 2; i < MAX_DEPTH; i++) {
current = last + previous;
if (current < last) /* overflow */ current = last;
min_len[i] = current;
previous = last;
last = current;
}
CORD_max_len = last - 1;
min_len_init = 1;
}
void CORD_init_forest(ForestElement * forest, size_t max_len)
{
register int i;
for (i = 0; i < MAX_DEPTH; i++) {
forest[i].c = 0;
if (min_len[i] > max_len) return;
}
ABORT("Cord too long");
}
/* Add a leaf to the appropriate level in the forest, cleaning */
/* out lower levels as necessary. */
/* Also works if x is a balanced tree of concatenations; however */
/* in this case an extra concatenation node may be inserted above x; */
/* This node should not be counted in the statement of the invariants. */
void CORD_add_forest(ForestElement * forest, CORD x, size_t len)
{
register int i = 0;
register CORD sum = CORD_EMPTY;
register size_t sum_len = 0;
while (len > min_len[i + 1]) {
if (forest[i].c != 0) {
sum = CORD_cat(forest[i].c, sum);
sum_len += forest[i].len;
forest[i].c = 0;
}
i++;
}
/* Sum has depth at most 1 greter than what would be required */
/* for balance. */
sum = CORD_cat(sum, x);
sum_len += len;
/* If x was a leaf, then sum is now balanced. To see this */
/* consider the two cases in which forest[i-1] either is or is */
/* not empty. */
while (sum_len >= min_len[i]) {
if (forest[i].c != 0) {
sum = CORD_cat(forest[i].c, sum);
sum_len += forest[i].len;
/* This is again balanced, since sum was balanced, and has */
/* allowable depth that differs from i by at most 1. */
forest[i].c = 0;
}
i++;
}
i--;
forest[i].c = sum;
forest[i].len = sum_len;
}
CORD CORD_concat_forest(ForestElement * forest, size_t expected_len)
{
register int i = 0;
CORD sum = 0;
size_t sum_len = 0;
while (sum_len != expected_len) {
if (forest[i].c != 0) {
sum = CORD_cat(forest[i].c, sum);
sum_len += forest[i].len;
}
i++;
}
return(sum);
}
/* Insert the frontier of x into forest. Balanced subtrees are */
/* treated as leaves. This potentially adds one to the depth */
/* of the final tree. */
void CORD_balance_insert(CORD x, size_t len, ForestElement * forest)
{
register int depth;
if (CORD_IS_STRING(x)) {
CORD_add_forest(forest, x, len);
} else if (IS_CONCATENATION(x)
&& ((depth = DEPTH(x)) >= MAX_DEPTH
|| len < min_len[depth])) {
register struct Concatenation * conc
= &(((CordRep *)x) -> concatenation);
size_t left_len = LEFT_LEN(conc);
CORD_balance_insert(conc -> left, left_len, forest);
CORD_balance_insert(conc -> right, len - left_len, forest);
} else /* function or balanced */ {
CORD_add_forest(forest, x, len);
}
}
CORD CORD_balance(CORD x)
{
Forest forest;
register size_t len;
if (x == 0) return(0);
if (CORD_IS_STRING(x)) return(x);
if (!min_len_init) CORD_init_min_len();
len = LEN(x);
CORD_init_forest(forest, len);
CORD_balance_insert(x, len, forest);
return(CORD_concat_forest(forest, len));
}
/* Position primitives */
/* Private routines to deal with the hard cases only: */
/* P contains a prefix of the path to cur_pos. Extend it to a full */
/* path and set up leaf info. */
/* Return 0 if past the end of cord, 1 o.w. */
void CORD__extend_path(register CORD_pos p)
{
register struct CORD_pe * current_pe = &(p[0].path[p[0].path_len]);
register CORD top = current_pe -> pe_cord;
register size_t pos = p[0].cur_pos;
register size_t top_pos = current_pe -> pe_start_pos;
register size_t top_len = GEN_LEN(top);
/* Fill in the rest of the path. */
while(!CORD_IS_STRING(top) && IS_CONCATENATION(top)) {
register struct Concatenation * conc =
&(((CordRep *)top) -> concatenation);
register size_t left_len;
left_len = LEFT_LEN(conc);
current_pe++;
if (pos >= top_pos + left_len) {
current_pe -> pe_cord = top = conc -> right;
current_pe -> pe_start_pos = top_pos = top_pos + left_len;
top_len -= left_len;
} else {
current_pe -> pe_cord = top = conc -> left;
current_pe -> pe_start_pos = top_pos;
top_len = left_len;
}
p[0].path_len++;
}
/* Fill in leaf description for fast access. */
if (CORD_IS_STRING(top)) {
p[0].cur_leaf = top;
p[0].cur_start = top_pos;
p[0].cur_end = top_pos + top_len;
} else {
p[0].cur_end = 0;
}
if (pos >= top_pos + top_len) p[0].path_len = CORD_POS_INVALID;
}
char CORD__pos_fetch(register CORD_pos p)
{
/* Leaf is a function node */
struct CORD_pe * pe = &((p)[0].path[(p)[0].path_len]);
CORD leaf = pe -> pe_cord;
register struct Function * f = &(((CordRep *)leaf) -> function);
if (!IS_FUNCTION(leaf)) ABORT("CORD_pos_fetch: bad leaf");
return ((*(f -> fn))(p[0].cur_pos - pe -> pe_start_pos, f -> client_data));
}
void CORD__next(register CORD_pos p)
{
register size_t cur_pos = p[0].cur_pos + 1;
register struct CORD_pe * current_pe = &((p)[0].path[(p)[0].path_len]);
register CORD leaf = current_pe -> pe_cord;
/* Leaf is not a string or we're at end of leaf */
p[0].cur_pos = cur_pos;
if (!CORD_IS_STRING(leaf)) {
/* Function leaf */
register struct Function * f = &(((CordRep *)leaf) -> function);
register size_t start_pos = current_pe -> pe_start_pos;
register size_t end_pos = start_pos + f -> len;
if (cur_pos < end_pos) {
/* Fill cache and return. */
register size_t i;
register size_t limit = cur_pos + FUNCTION_BUF_SZ;
register CORD_fn fn = f -> fn;
register void * client_data = f -> client_data;
if (limit > end_pos) {
limit = end_pos;
}
for (i = cur_pos; i < limit; i++) {
p[0].function_buf[i - cur_pos] =
(*fn)(i - start_pos, client_data);
}
p[0].cur_start = cur_pos;
p[0].cur_leaf = p[0].function_buf;
p[0].cur_end = limit;
return;
}
}
/* End of leaf */
/* Pop the stack until we find two concatenation nodes with the */
/* same start position: this implies we were in left part. */
{
while (p[0].path_len > 0
&& current_pe[0].pe_start_pos != current_pe[-1].pe_start_pos) {
p[0].path_len--;
current_pe--;
}
if (p[0].path_len == 0) {
p[0].path_len = CORD_POS_INVALID;
return;
}
}
p[0].path_len--;
CORD__extend_path(p);
}
void CORD__prev(register CORD_pos p)
{
register struct CORD_pe * pe = &(p[0].path[p[0].path_len]);
if (p[0].cur_pos == 0) {
p[0].path_len = CORD_POS_INVALID;
return;
}
p[0].cur_pos--;
if (p[0].cur_pos >= pe -> pe_start_pos) return;
/* Beginning of leaf */
/* Pop the stack until we find two concatenation nodes with the */
/* different start position: this implies we were in right part. */
{
register struct CORD_pe * current_pe = &((p)[0].path[(p)[0].path_len]);
while (p[0].path_len > 0
&& current_pe[0].pe_start_pos == current_pe[-1].pe_start_pos) {
p[0].path_len--;
current_pe--;
}
}
p[0].path_len--;
CORD__extend_path(p);
}
#undef CORD_pos_fetch
#undef CORD_next
#undef CORD_prev
#undef CORD_pos_to_index
#undef CORD_pos_to_cord
#undef CORD_pos_valid
char CORD_pos_fetch(register CORD_pos p)
{
if (p[0].cur_start <= p[0].cur_pos && p[0].cur_pos < p[0].cur_end) {
return(p[0].cur_leaf[p[0].cur_pos - p[0].cur_start]);
} else {
return(CORD__pos_fetch(p));
}
}
void CORD_next(CORD_pos p)
{
if (p[0].cur_pos < p[0].cur_end - 1) {
p[0].cur_pos++;
} else {
CORD__next(p);
}
}
void CORD_prev(CORD_pos p)
{
if (p[0].cur_end != 0 && p[0].cur_pos > p[0].cur_start) {
p[0].cur_pos--;
} else {
CORD__prev(p);
}
}
size_t CORD_pos_to_index(CORD_pos p)
{
return(p[0].cur_pos);
}
CORD CORD_pos_to_cord(CORD_pos p)
{
return(p[0].path[0].pe_cord);
}
int CORD_pos_valid(CORD_pos p)
{
return(p[0].path_len != CORD_POS_INVALID);
}
void CORD_set_pos(CORD_pos p, CORD x, size_t i)
{
if (x == CORD_EMPTY) {
p[0].path_len = CORD_POS_INVALID;
return;
}
p[0].path[0].pe_cord = x;
p[0].path[0].pe_start_pos = 0;
p[0].path_len = 0;
p[0].cur_pos = i;
CORD__extend_path(p);
}
+396
View File
@@ -0,0 +1,396 @@
/*
* Copyright (c) 1993-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* An sprintf implementation that understands cords. This is probably */
/* not terribly portable. It assumes an ANSI stdarg.h. It further */
/* assumes that I can make copies of va_list variables, and read */
/* arguments repeatedly by applyting va_arg to the copies. This */
/* could be avoided at some performance cost. */
/* We also assume that unsigned and signed integers of various kinds */
/* have the same sizes, and can be cast back and forth. */
/* We assume that void * and char * have the same size. */
/* All this cruft is needed because we want to rely on the underlying */
/* sprintf implementation whenever possible. */
/* Boehm, September 21, 1995 6:00 pm PDT */
#include "cord.h"
#include "ec.h"
#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#include "gc.h"
#define CONV_SPEC_LEN 50 /* Maximum length of a single */
/* conversion specification. */
#define CONV_RESULT_LEN 50 /* Maximum length of any */
/* conversion with default */
/* width and prec. */
static int ec_len(CORD_ec x)
{
return(CORD_len(x[0].ec_cord) + (x[0].ec_bufptr - x[0].ec_buf));
}
/* Possible nonumeric precision values. */
# define NONE -1
# define VARIABLE -2
/* Copy the conversion specification from CORD_pos into the buffer buf */
/* Return negative on error. */
/* Source initially points one past the leading %. */
/* It is left pointing at the conversion type. */
/* Assign field width and precision to *width and *prec. */
/* If width or prec is *, VARIABLE is assigned. */
/* Set *left to 1 if left adjustment flag is present. */
/* Set *long_arg to 1 if long flag ('l' or 'L') is present, or to */
/* -1 if 'h' is present. */
static int extract_conv_spec(CORD_pos source, char *buf,
int * width, int *prec, int *left, int * long_arg)
{
register int result = 0;
register int current_number = 0;
register int saw_period = 0;
register int saw_number = 0;
register int chars_so_far = 0;
register char current;
*width = NONE;
buf[chars_so_far++] = '%';
while(CORD_pos_valid(source)) {
if (chars_so_far >= CONV_SPEC_LEN) return(-1);
current = CORD_pos_fetch(source);
buf[chars_so_far++] = current;
switch(current) {
case '*':
saw_number = 1;
current_number = VARIABLE;
break;
case '0':
if (!saw_number) {
/* Zero fill flag; ignore */
break;
} /* otherwise fall through: */
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
saw_number = 1;
current_number *= 10;
current_number += current - '0';
break;
case '.':
saw_period = 1;
if(saw_number) {
*width = current_number;
saw_number = 0;
}
current_number = 0;
break;
case 'l':
case 'L':
*long_arg = 1;
current_number = 0;
break;
case 'h':
*long_arg = -1;
current_number = 0;
break;
case ' ':
case '+':
case '#':
current_number = 0;
break;
case '-':
*left = 1;
current_number = 0;
break;
case 'd':
case 'i':
case 'o':
case 'u':
case 'x':
case 'X':
case 'f':
case 'e':
case 'E':
case 'g':
case 'G':
case 'c':
case 'C':
case 's':
case 'S':
case 'p':
case 'n':
case 'r':
goto done;
default:
return(-1);
}
CORD_next(source);
}
return(-1);
done:
if (saw_number) {
if (saw_period) {
*prec = current_number;
} else {
*prec = NONE;
*width = current_number;
}
} else {
*prec = NONE;
}
buf[chars_so_far] = '\0';
return(result);
}
int CORD_vsprintf(CORD * out, CORD format, va_list args)
{
CORD_ec result;
register int count;
register char current;
CORD_pos pos;
char conv_spec[CONV_SPEC_LEN + 1];
CORD_ec_init(result);
for (CORD_set_pos(pos, format, 0); CORD_pos_valid(pos); CORD_next(pos)) {
current = CORD_pos_fetch(pos);
if (current == '%') {
CORD_next(pos);
if (!CORD_pos_valid(pos)) return(-1);
current = CORD_pos_fetch(pos);
if (current == '%') {
CORD_ec_append(result, current);
} else {
int width, prec;
int left_adj = 0;
int long_arg = 0;
CORD arg;
size_t len;
if (extract_conv_spec(pos, conv_spec,
&width, &prec,
&left_adj, &long_arg) < 0) {
return(-1);
}
current = CORD_pos_fetch(pos);
switch(current) {
case 'n':
/* Assign length to next arg */
if (long_arg == 0) {
int * pos_ptr;
pos_ptr = va_arg(args, int *);
*pos_ptr = ec_len(result);
} else if (long_arg > 0) {
long * pos_ptr;
pos_ptr = va_arg(args, long *);
*pos_ptr = ec_len(result);
} else {
short * pos_ptr;
pos_ptr = va_arg(args, short *);
*pos_ptr = ec_len(result);
}
goto done;
case 'r':
/* Append cord and any padding */
if (width == VARIABLE) width = va_arg(args, int);
if (prec == VARIABLE) prec = va_arg(args, int);
arg = va_arg(args, CORD);
len = CORD_len(arg);
if (prec != NONE && len > prec) {
if (prec < 0) return(-1);
arg = CORD_substr(arg, 0, prec);
len = prec;
}
if (width != NONE && len < width) {
char * blanks = GC_MALLOC_ATOMIC(width-len+1);
memset(blanks, ' ', width-len);
blanks[width-len] = '\0';
if (left_adj) {
arg = CORD_cat(arg, blanks);
} else {
arg = CORD_cat(blanks, arg);
}
}
CORD_ec_append_cord(result, arg);
goto done;
case 'c':
if (width == NONE && prec == NONE) {
register char c;
c = (char)va_arg(args, int);
CORD_ec_append(result, c);
goto done;
}
break;
case 's':
if (width == NONE && prec == NONE) {
char * str = va_arg(args, char *);
register char c;
while ((c = *str++)) {
CORD_ec_append(result, c);
}
goto done;
}
break;
default:
break;
}
/* Use standard sprintf to perform conversion */
{
register char * buf;
va_list vsprintf_args;
int max_size = 0;
int res;
# ifdef __va_copy
__va_copy(vsprintf_args, args);
# else
# if defined(__GNUC__) && !defined(__DJGPP__) /* and probably in other cases */
va_copy(vsprintf_args, args);
# else
vsprintf_args = args;
# endif
# endif
if (width == VARIABLE) width = va_arg(args, int);
if (prec == VARIABLE) prec = va_arg(args, int);
if (width != NONE) max_size = width;
if (prec != NONE && prec > max_size) max_size = prec;
max_size += CONV_RESULT_LEN;
if (max_size >= CORD_BUFSZ) {
buf = GC_MALLOC_ATOMIC(max_size + 1);
} else {
if (CORD_BUFSZ - (result[0].ec_bufptr-result[0].ec_buf)
< max_size) {
CORD_ec_flush_buf(result);
}
buf = result[0].ec_bufptr;
}
switch(current) {
case 'd':
case 'i':
case 'o':
case 'u':
case 'x':
case 'X':
case 'c':
if (long_arg <= 0) {
(void) va_arg(args, int);
} else if (long_arg > 0) {
(void) va_arg(args, long);
}
break;
case 's':
case 'p':
(void) va_arg(args, char *);
break;
case 'f':
case 'e':
case 'E':
case 'g':
case 'G':
(void) va_arg(args, double);
break;
default:
return(-1);
}
res = vsprintf(buf, conv_spec, vsprintf_args);
len = (size_t)res;
if ((char *)(GC_word)res == buf) {
/* old style vsprintf */
len = strlen(buf);
} else if (res < 0) {
return(-1);
}
if (buf != result[0].ec_bufptr) {
register char c;
while ((c = *buf++)) {
CORD_ec_append(result, c);
}
} else {
result[0].ec_bufptr = buf + len;
}
}
done:;
}
} else {
CORD_ec_append(result, current);
}
}
count = ec_len(result);
*out = CORD_balance(CORD_ec_to_cord(result));
return(count);
}
int CORD_sprintf(CORD * out, CORD format, ...)
{
va_list args;
int result;
va_start(args, format);
result = CORD_vsprintf(out, format, args);
va_end(args);
return(result);
}
int CORD_fprintf(FILE * f, CORD format, ...)
{
va_list args;
int result;
CORD out;
va_start(args, format);
result = CORD_vsprintf(&out, format, args);
va_end(args);
if (result > 0) CORD_put(out, f);
return(result);
}
int CORD_vfprintf(FILE * f, CORD format, va_list args)
{
int result;
CORD out;
result = CORD_vsprintf(&out, format, args);
if (result > 0) CORD_put(out, f);
return(result);
}
int CORD_printf(CORD format, ...)
{
va_list args;
int result;
CORD out;
va_start(args, format);
result = CORD_vsprintf(&out, format, args);
va_end(args);
if (result > 0) CORD_put(out, stdout);
return(result);
}
int CORD_vprintf(CORD format, va_list args)
{
int result;
CORD out;
result = CORD_vsprintf(&out, format, args);
if (result > 0) CORD_put(out, stdout);
return(result);
}
+235
View File
@@ -0,0 +1,235 @@
/*
* Copyright (c) 1993-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, August 24, 1994 11:58 am PDT */
# include "gc.h" /* For GC_INIT() only */
# include "cord.h"
# include <string.h>
# include <stdio.h>
# include <stdlib.h>
/* This is a very incomplete test of the cord package. It knows about */
/* a few internals of the package (e.g. when C strings are returned) */
/* that real clients shouldn't rely on. */
# define ABORT(string) \
{ int x = 0; fprintf(stderr, "FAILED: %s\n", string); x = 1 / x; abort(); }
int count;
int test_fn(char c, void * client_data)
{
if (client_data != (void *)13) ABORT("bad client data");
if (count < 64*1024+1) {
if ((count & 1) == 0) {
if (c != 'b') ABORT("bad char");
} else {
if (c != 'a') ABORT("bad char");
}
count++;
return(0);
} else {
if (c != 'c') ABORT("bad char");
count++;
return(1);
}
}
char id_cord_fn(size_t i, void * client_data)
{
return((char)i);
}
void test_basics()
{
CORD x = CORD_from_char_star("ab");
register int i;
char c;
CORD y;
CORD_pos p;
x = CORD_cat(x,x);
if (!CORD_IS_STRING(x)) ABORT("short cord should usually be a string");
if (strcmp(x, "abab") != 0) ABORT("bad CORD_cat result");
for (i = 1; i < 16; i++) {
x = CORD_cat(x,x);
}
x = CORD_cat(x,"c");
if (CORD_len(x) != 128*1024+1) ABORT("bad length");
count = 0;
if (CORD_iter5(x, 64*1024-1, test_fn, CORD_NO_FN, (void *)13) == 0) {
ABORT("CORD_iter5 failed");
}
if (count != 64*1024 + 2) ABORT("CORD_iter5 failed");
count = 0;
CORD_set_pos(p, x, 64*1024-1);
while(CORD_pos_valid(p)) {
(void) test_fn(CORD_pos_fetch(p), (void *)13);
CORD_next(p);
}
if (count != 64*1024 + 2) ABORT("Position based iteration failed");
y = CORD_substr(x, 1023, 5);
if (!CORD_IS_STRING(y)) ABORT("short cord should usually be a string");
if (strcmp(y, "babab") != 0) ABORT("bad CORD_substr result");
y = CORD_substr(x, 1024, 8);
if (!CORD_IS_STRING(y)) ABORT("short cord should usually be a string");
if (strcmp(y, "abababab") != 0) ABORT("bad CORD_substr result");
y = CORD_substr(x, 128*1024-1, 8);
if (!CORD_IS_STRING(y)) ABORT("short cord should usually be a string");
if (strcmp(y, "bc") != 0) ABORT("bad CORD_substr result");
x = CORD_balance(x);
if (CORD_len(x) != 128*1024+1) ABORT("bad length");
count = 0;
if (CORD_iter5(x, 64*1024-1, test_fn, CORD_NO_FN, (void *)13) == 0) {
ABORT("CORD_iter5 failed");
}
if (count != 64*1024 + 2) ABORT("CORD_iter5 failed");
y = CORD_substr(x, 1023, 5);
if (!CORD_IS_STRING(y)) ABORT("short cord should usually be a string");
if (strcmp(y, "babab") != 0) ABORT("bad CORD_substr result");
y = CORD_from_fn(id_cord_fn, 0, 13);
i = 0;
CORD_set_pos(p, y, i);
while(CORD_pos_valid(p)) {
c = CORD_pos_fetch(p);
if(c != i) ABORT("Traversal of function node failed");
CORD_next(p); i++;
}
if (i != 13) ABORT("Bad apparent length for function node");
}
void test_extras()
{
# if defined(__OS2__) || defined(__DJGPP__)
# define FNAME1 "tmp1"
# define FNAME2 "tmp2"
# elif defined(AMIGA)
# define FNAME1 "T:tmp1"
# define FNAME2 "T:tmp2"
# else
# define FNAME1 "/tmp/cord_test"
# define FNAME2 "/tmp/cord_test2"
# endif
register int i;
CORD y = "abcdefghijklmnopqrstuvwxyz0123456789";
CORD x = "{}";
CORD w, z;
FILE *f;
FILE *f1a, *f1b, *f2;
w = CORD_cat(CORD_cat(y,y),y);
z = CORD_catn(3,y,y,y);
if (CORD_cmp(w,z) != 0) ABORT("CORD_catn comparison wrong");
for (i = 1; i < 100; i++) {
x = CORD_cat(x, y);
}
z = CORD_balance(x);
if (CORD_cmp(x,z) != 0) ABORT("balanced string comparison wrong");
if (CORD_cmp(x,CORD_cat(z, CORD_nul(13))) >= 0) ABORT("comparison 2");
if (CORD_cmp(CORD_cat(x, CORD_nul(13)), z) <= 0) ABORT("comparison 3");
if (CORD_cmp(x,CORD_cat(z, "13")) >= 0) ABORT("comparison 4");
if ((f = fopen(FNAME1, "w")) == 0) ABORT("open failed");
if (CORD_put(z,f) == EOF) ABORT("CORD_put failed");
if (fclose(f) == EOF) ABORT("fclose failed");
w = CORD_from_file(f1a = fopen(FNAME1, "rb"));
if (CORD_len(w) != CORD_len(z)) ABORT("file length wrong");
if (CORD_cmp(w,z) != 0) ABORT("file comparison wrong");
if (CORD_cmp(CORD_substr(w, 50*36+2, 36), y) != 0)
ABORT("file substr wrong");
z = CORD_from_file_lazy(f1b = fopen(FNAME1, "rb"));
if (CORD_cmp(w,z) != 0) ABORT("File conversions differ");
if (CORD_chr(w, 0, '9') != 37) ABORT("CORD_chr failed 1");
if (CORD_chr(w, 3, 'a') != 38) ABORT("CORD_chr failed 2");
if (CORD_rchr(w, CORD_len(w) - 1, '}') != 1) ABORT("CORD_rchr failed");
x = y;
for (i = 1; i < 14; i++) {
x = CORD_cat(x,x);
}
if ((f = fopen(FNAME2, "w")) == 0) ABORT("2nd open failed");
# ifdef __DJGPP__
/* FIXME: DJGPP workaround. Why does this help? */
if (fflush(f) != 0) ABORT("fflush failed");
# endif
if (CORD_put(x,f) == EOF) ABORT("CORD_put failed");
if (fclose(f) == EOF) ABORT("fclose failed");
w = CORD_from_file(f2 = fopen(FNAME2, "rb"));
if (CORD_len(w) != CORD_len(x)) ABORT("file length wrong");
if (CORD_cmp(w,x) != 0) ABORT("file comparison wrong");
if (CORD_cmp(CORD_substr(w, 1000*36, 36), y) != 0)
ABORT("file substr wrong");
if (strcmp(CORD_to_char_star(CORD_substr(w, 1000*36, 36)), y) != 0)
ABORT("char * file substr wrong");
if (strcmp(CORD_substr(w, 1000*36, 2), "ab") != 0)
ABORT("short file substr wrong");
if (CORD_str(x,1,"9a") != 35) ABORT("CORD_str failed 1");
if (CORD_str(x,0,"9abcdefghijk") != 35) ABORT("CORD_str failed 2");
if (CORD_str(x,0,"9abcdefghijx") != CORD_NOT_FOUND)
ABORT("CORD_str failed 3");
if (CORD_str(x,0,"9>") != CORD_NOT_FOUND) ABORT("CORD_str failed 4");
if (remove(FNAME1) != 0) {
/* On some systems, e.g. OS2, this may fail if f1 is still open. */
if ((fclose(f1a) == EOF) & (fclose(f1b) == EOF))
ABORT("fclose(f1) failed");
if (remove(FNAME1) != 0) ABORT("remove 1 failed");
}
if (remove(FNAME2) != 0) {
if (fclose(f2) == EOF) ABORT("fclose(f2) failed");
if (remove(FNAME2) != 0) ABORT("remove 2 failed");
}
}
void test_printf()
{
CORD result;
char result2[200];
long l;
short s;
CORD x;
if (CORD_sprintf(&result, "%7.2f%ln", 3.14159F, &l) != 7)
ABORT("CORD_sprintf failed 1");
if (CORD_cmp(result, " 3.14") != 0)ABORT("CORD_sprintf goofed 1");
if (l != 7) ABORT("CORD_sprintf goofed 2");
if (CORD_sprintf(&result, "%-7.2s%hn%c%s", "abcd", &s, 'x', "yz") != 10)
ABORT("CORD_sprintf failed 2");
if (CORD_cmp(result, "ab xyz") != 0)ABORT("CORD_sprintf goofed 3");
if (s != 7) ABORT("CORD_sprintf goofed 4");
x = "abcdefghij";
x = CORD_cat(x,x);
x = CORD_cat(x,x);
x = CORD_cat(x,x);
if (CORD_sprintf(&result, "->%-120.78r!\n", x) != 124)
ABORT("CORD_sprintf failed 3");
(void) sprintf(result2, "->%-120.78s!\n", CORD_to_char_star(x));
if (CORD_cmp(result, result2) != 0)ABORT("CORD_sprintf goofed 5");
}
int main()
{
# ifdef THINK_C
printf("cordtest:\n");
# endif
GC_INIT();
test_basics();
test_extras();
test_printf();
CORD_fprintf(stderr, "SUCCEEDED\n");
return(0);
}
+621
View File
@@ -0,0 +1,621 @@
/*
* Copyright (c) 1993-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*
* Author: Hans-J. Boehm ([email protected])
*/
/*
* These are functions on cords that do not need to understand their
* implementation. They serve also serve as example client code for
* cord_basics.
*/
/* Boehm, December 8, 1995 1:53 pm PST */
# include <stdio.h>
# include <string.h>
# include <stdlib.h>
# include <stdarg.h>
# include "cord.h"
# include "ec.h"
# define I_HIDE_POINTERS /* So we get access to allocation lock. */
/* We use this for lazy file reading, */
/* so that we remain independent */
/* of the threads primitives. */
# include "gc.h"
/* For now we assume that pointer reads and writes are atomic, */
/* i.e. another thread always sees the state before or after */
/* a write. This might be false on a Motorola M68K with */
/* pointers that are not 32-bit aligned. But there probably */
/* aren't too many threads packages running on those. */
# define ATOMIC_WRITE(x,y) (x) = (y)
# define ATOMIC_READ(x) (*(x))
/* The standard says these are in stdio.h, but they aren't always: */
# ifndef SEEK_SET
# define SEEK_SET 0
# endif
# ifndef SEEK_END
# define SEEK_END 2
# endif
# define BUFSZ 2048 /* Size of stack allocated buffers when */
/* we want large buffers. */
typedef void (* oom_fn)(void);
# define OUT_OF_MEMORY { if (CORD_oom_fn != (oom_fn) 0) (*CORD_oom_fn)(); \
ABORT("Out of memory\n"); }
# define ABORT(msg) { fprintf(stderr, "%s\n", msg); abort(); }
CORD CORD_cat_char(CORD x, char c)
{
register char * string;
if (c == '\0') return(CORD_cat(x, CORD_nul(1)));
string = GC_MALLOC_ATOMIC(2);
if (string == 0) OUT_OF_MEMORY;
string[0] = c;
string[1] = '\0';
return(CORD_cat_char_star(x, string, 1));
}
CORD CORD_catn(int nargs, ...)
{
register CORD result = CORD_EMPTY;
va_list args;
register int i;
va_start(args, nargs);
for (i = 0; i < nargs; i++) {
register CORD next = va_arg(args, CORD);
result = CORD_cat(result, next);
}
va_end(args);
return(result);
}
typedef struct {
size_t len;
size_t count;
char * buf;
} CORD_fill_data;
int CORD_fill_proc(char c, void * client_data)
{
register CORD_fill_data * d = (CORD_fill_data *)client_data;
register size_t count = d -> count;
(d -> buf)[count] = c;
d -> count = ++count;
if (count >= d -> len) {
return(1);
} else {
return(0);
}
}
int CORD_batched_fill_proc(const char * s, void * client_data)
{
register CORD_fill_data * d = (CORD_fill_data *)client_data;
register size_t count = d -> count;
register size_t max = d -> len;
register char * buf = d -> buf;
register const char * t = s;
while((buf[count] = *t++) != '\0') {
count++;
if (count >= max) {
d -> count = count;
return(1);
}
}
d -> count = count;
return(0);
}
/* Fill buf with len characters starting at i. */
/* Assumes len characters are available. */
void CORD_fill_buf(CORD x, size_t i, size_t len, char * buf)
{
CORD_fill_data fd;
fd.len = len;
fd.buf = buf;
fd.count = 0;
(void)CORD_iter5(x, i, CORD_fill_proc, CORD_batched_fill_proc, &fd);
}
int CORD_cmp(CORD x, CORD y)
{
CORD_pos xpos;
CORD_pos ypos;
register size_t avail, yavail;
if (y == CORD_EMPTY) return(x != CORD_EMPTY);
if (x == CORD_EMPTY) return(-1);
if (CORD_IS_STRING(y) && CORD_IS_STRING(x)) return(strcmp(x,y));
CORD_set_pos(xpos, x, 0);
CORD_set_pos(ypos, y, 0);
for(;;) {
if (!CORD_pos_valid(xpos)) {
if (CORD_pos_valid(ypos)) {
return(-1);
} else {
return(0);
}
}
if (!CORD_pos_valid(ypos)) {
return(1);
}
if ((avail = CORD_pos_chars_left(xpos)) <= 0
|| (yavail = CORD_pos_chars_left(ypos)) <= 0) {
register char xcurrent = CORD_pos_fetch(xpos);
register char ycurrent = CORD_pos_fetch(ypos);
if (xcurrent != ycurrent) return(xcurrent - ycurrent);
CORD_next(xpos);
CORD_next(ypos);
} else {
/* process as many characters as we can */
register int result;
if (avail > yavail) avail = yavail;
result = strncmp(CORD_pos_cur_char_addr(xpos),
CORD_pos_cur_char_addr(ypos), avail);
if (result != 0) return(result);
CORD_pos_advance(xpos, avail);
CORD_pos_advance(ypos, avail);
}
}
}
int CORD_ncmp(CORD x, size_t x_start, CORD y, size_t y_start, size_t len)
{
CORD_pos xpos;
CORD_pos ypos;
register size_t count;
register long avail, yavail;
CORD_set_pos(xpos, x, x_start);
CORD_set_pos(ypos, y, y_start);
for(count = 0; count < len;) {
if (!CORD_pos_valid(xpos)) {
if (CORD_pos_valid(ypos)) {
return(-1);
} else {
return(0);
}
}
if (!CORD_pos_valid(ypos)) {
return(1);
}
if ((avail = CORD_pos_chars_left(xpos)) <= 0
|| (yavail = CORD_pos_chars_left(ypos)) <= 0) {
register char xcurrent = CORD_pos_fetch(xpos);
register char ycurrent = CORD_pos_fetch(ypos);
if (xcurrent != ycurrent) return(xcurrent - ycurrent);
CORD_next(xpos);
CORD_next(ypos);
count++;
} else {
/* process as many characters as we can */
register int result;
if (avail > yavail) avail = yavail;
count += avail;
if (count > len) avail -= (count - len);
result = strncmp(CORD_pos_cur_char_addr(xpos),
CORD_pos_cur_char_addr(ypos), (size_t)avail);
if (result != 0) return(result);
CORD_pos_advance(xpos, (size_t)avail);
CORD_pos_advance(ypos, (size_t)avail);
}
}
return(0);
}
char * CORD_to_char_star(CORD x)
{
register size_t len = CORD_len(x);
char * result = GC_MALLOC_ATOMIC(len + 1);
if (result == 0) OUT_OF_MEMORY;
CORD_fill_buf(x, 0, len, result);
result[len] = '\0';
return(result);
}
CORD CORD_from_char_star(const char *s)
{
char * result;
size_t len = strlen(s);
if (0 == len) return(CORD_EMPTY);
result = GC_MALLOC_ATOMIC(len + 1);
if (result == 0) OUT_OF_MEMORY;
memcpy(result, s, len+1);
return(result);
}
const char * CORD_to_const_char_star(CORD x)
{
if (x == 0) return("");
if (CORD_IS_STRING(x)) return((const char *)x);
return(CORD_to_char_star(x));
}
char CORD_fetch(CORD x, size_t i)
{
CORD_pos xpos;
CORD_set_pos(xpos, x, i);
if (!CORD_pos_valid(xpos)) ABORT("bad index?");
return(CORD_pos_fetch(xpos));
}
int CORD_put_proc(char c, void * client_data)
{
register FILE * f = (FILE *)client_data;
return(putc(c, f) == EOF);
}
int CORD_batched_put_proc(const char * s, void * client_data)
{
register FILE * f = (FILE *)client_data;
return(fputs(s, f) == EOF);
}
int CORD_put(CORD x, FILE * f)
{
if (CORD_iter5(x, 0, CORD_put_proc, CORD_batched_put_proc, f)) {
return(EOF);
} else {
return(1);
}
}
typedef struct {
size_t pos; /* Current position in the cord */
char target; /* Character we're looking for */
} chr_data;
int CORD_chr_proc(char c, void * client_data)
{
register chr_data * d = (chr_data *)client_data;
if (c == d -> target) return(1);
(d -> pos) ++;
return(0);
}
int CORD_rchr_proc(char c, void * client_data)
{
register chr_data * d = (chr_data *)client_data;
if (c == d -> target) return(1);
(d -> pos) --;
return(0);
}
int CORD_batched_chr_proc(const char *s, void * client_data)
{
register chr_data * d = (chr_data *)client_data;
register char * occ = strchr(s, d -> target);
if (occ == 0) {
d -> pos += strlen(s);
return(0);
} else {
d -> pos += occ - s;
return(1);
}
}
size_t CORD_chr(CORD x, size_t i, int c)
{
chr_data d;
d.pos = i;
d.target = c;
if (CORD_iter5(x, i, CORD_chr_proc, CORD_batched_chr_proc, &d)) {
return(d.pos);
} else {
return(CORD_NOT_FOUND);
}
}
size_t CORD_rchr(CORD x, size_t i, int c)
{
chr_data d;
d.pos = i;
d.target = c;
if (CORD_riter4(x, i, CORD_rchr_proc, &d)) {
return(d.pos);
} else {
return(CORD_NOT_FOUND);
}
}
/* Find the first occurrence of s in x at position start or later. */
/* This uses an asymptotically poor algorithm, which should typically */
/* perform acceptably. We compare the first few characters directly, */
/* and call CORD_ncmp whenever there is a partial match. */
/* This has the advantage that we allocate very little, or not at all. */
/* It's very fast if there are few close misses. */
size_t CORD_str(CORD x, size_t start, CORD s)
{
CORD_pos xpos;
size_t xlen = CORD_len(x);
size_t slen;
register size_t start_len;
const char * s_start;
unsigned long s_buf = 0; /* The first few characters of s */
unsigned long x_buf = 0; /* Start of candidate substring. */
/* Initialized only to make compilers */
/* happy. */
unsigned long mask = 0;
register size_t i;
register size_t match_pos;
if (s == CORD_EMPTY) return(start);
if (CORD_IS_STRING(s)) {
s_start = s;
slen = strlen(s);
} else {
s_start = CORD_to_char_star(CORD_substr(s, 0, sizeof(unsigned long)));
slen = CORD_len(s);
}
if (xlen < start || xlen - start < slen) return(CORD_NOT_FOUND);
start_len = slen;
if (start_len > sizeof(unsigned long)) start_len = sizeof(unsigned long);
CORD_set_pos(xpos, x, start);
for (i = 0; i < start_len; i++) {
mask <<= 8;
mask |= 0xff;
s_buf <<= 8;
s_buf |= (unsigned char)s_start[i];
x_buf <<= 8;
x_buf |= (unsigned char)CORD_pos_fetch(xpos);
CORD_next(xpos);
}
for (match_pos = start; ; match_pos++) {
if ((x_buf & mask) == s_buf) {
if (slen == start_len ||
CORD_ncmp(x, match_pos + start_len,
s, start_len, slen - start_len) == 0) {
return(match_pos);
}
}
if ( match_pos == xlen - slen ) {
return(CORD_NOT_FOUND);
}
x_buf <<= 8;
x_buf |= (unsigned char)CORD_pos_fetch(xpos);
CORD_next(xpos);
}
}
void CORD_ec_flush_buf(CORD_ec x)
{
register size_t len = x[0].ec_bufptr - x[0].ec_buf;
char * s;
if (len == 0) return;
s = GC_MALLOC_ATOMIC(len+1);
memcpy(s, x[0].ec_buf, len);
s[len] = '\0';
x[0].ec_cord = CORD_cat_char_star(x[0].ec_cord, s, len);
x[0].ec_bufptr = x[0].ec_buf;
}
void CORD_ec_append_cord(CORD_ec x, CORD s)
{
CORD_ec_flush_buf(x);
x[0].ec_cord = CORD_cat(x[0].ec_cord, s);
}
/*ARGSUSED*/
char CORD_nul_func(size_t i, void * client_data)
{
return((char)(unsigned long)client_data);
}
CORD CORD_chars(char c, size_t i)
{
return(CORD_from_fn(CORD_nul_func, (void *)(unsigned long)c, i));
}
CORD CORD_from_file_eager(FILE * f)
{
register int c;
CORD_ec ecord;
CORD_ec_init(ecord);
for(;;) {
c = getc(f);
if (c == 0) {
/* Append the right number of NULs */
/* Note that any string of NULs is rpresented in 4 words, */
/* independent of its length. */
register size_t count = 1;
CORD_ec_flush_buf(ecord);
while ((c = getc(f)) == 0) count++;
ecord[0].ec_cord = CORD_cat(ecord[0].ec_cord, CORD_nul(count));
}
if (c == EOF) break;
CORD_ec_append(ecord, c);
}
(void) fclose(f);
return(CORD_balance(CORD_ec_to_cord(ecord)));
}
/* The state maintained for a lazily read file consists primarily */
/* of a large direct-mapped cache of previously read values. */
/* We could rely more on stdio buffering. That would have 2 */
/* disadvantages: */
/* 1) Empirically, not all fseek implementations preserve the */
/* buffer whenever they could. */
/* 2) It would fail if 2 different sections of a long cord */
/* were being read alternately. */
/* We do use the stdio buffer for read ahead. */
/* To guarantee thread safety in the presence of atomic pointer */
/* writes, cache lines are always replaced, and never modified in */
/* place. */
# define LOG_CACHE_SZ 14
# define CACHE_SZ (1 << LOG_CACHE_SZ)
# define LOG_LINE_SZ 9
# define LINE_SZ (1 << LOG_LINE_SZ)
typedef struct {
size_t tag;
char data[LINE_SZ];
/* data[i%LINE_SZ] = ith char in file if tag = i/LINE_SZ */
} cache_line;
typedef struct {
FILE * lf_file;
size_t lf_current; /* Current file pointer value */
cache_line * volatile lf_cache[CACHE_SZ/LINE_SZ];
} lf_state;
# define MOD_CACHE_SZ(n) ((n) & (CACHE_SZ - 1))
# define DIV_CACHE_SZ(n) ((n) >> LOG_CACHE_SZ)
# define MOD_LINE_SZ(n) ((n) & (LINE_SZ - 1))
# define DIV_LINE_SZ(n) ((n) >> LOG_LINE_SZ)
# define LINE_START(n) ((n) & ~(LINE_SZ - 1))
typedef struct {
lf_state * state;
size_t file_pos; /* Position of needed character. */
cache_line * new_cache;
} refill_data;
/* Executed with allocation lock. */
static char refill_cache(client_data)
refill_data * client_data;
{
register lf_state * state = client_data -> state;
register size_t file_pos = client_data -> file_pos;
FILE *f = state -> lf_file;
size_t line_start = LINE_START(file_pos);
size_t line_no = DIV_LINE_SZ(MOD_CACHE_SZ(file_pos));
cache_line * new_cache = client_data -> new_cache;
if (line_start != state -> lf_current
&& fseek(f, line_start, SEEK_SET) != 0) {
ABORT("fseek failed");
}
if (fread(new_cache -> data, sizeof(char), LINE_SZ, f)
<= file_pos - line_start) {
ABORT("fread failed");
}
new_cache -> tag = DIV_LINE_SZ(file_pos);
/* Store barrier goes here. */
ATOMIC_WRITE(state -> lf_cache[line_no], new_cache);
state -> lf_current = line_start + LINE_SZ;
return(new_cache->data[MOD_LINE_SZ(file_pos)]);
}
char CORD_lf_func(size_t i, void * client_data)
{
register lf_state * state = (lf_state *)client_data;
register cache_line * volatile * cl_addr =
&(state -> lf_cache[DIV_LINE_SZ(MOD_CACHE_SZ(i))]);
register cache_line * cl = (cache_line *)ATOMIC_READ(cl_addr);
if (cl == 0 || cl -> tag != DIV_LINE_SZ(i)) {
/* Cache miss */
refill_data rd;
rd.state = state;
rd.file_pos = i;
rd.new_cache = GC_NEW_ATOMIC(cache_line);
if (rd.new_cache == 0) OUT_OF_MEMORY;
return((char)(GC_word)
GC_call_with_alloc_lock((GC_fn_type) refill_cache, &rd));
}
return(cl -> data[MOD_LINE_SZ(i)]);
}
/*ARGSUSED*/
void CORD_lf_close_proc(void * obj, void * client_data)
{
if (fclose(((lf_state *)obj) -> lf_file) != 0) {
ABORT("CORD_lf_close_proc: fclose failed");
}
}
CORD CORD_from_file_lazy_inner(FILE * f, size_t len)
{
register lf_state * state = GC_NEW(lf_state);
register int i;
if (state == 0) OUT_OF_MEMORY;
if (len != 0) {
/* Dummy read to force buffer allocation. */
/* This greatly increases the probability */
/* of avoiding deadlock if buffer allocation */
/* is redirected to GC_malloc and the */
/* world is multithreaded. */
char buf[1];
(void) fread(buf, 1, 1, f);
rewind(f);
}
state -> lf_file = f;
for (i = 0; i < CACHE_SZ/LINE_SZ; i++) {
state -> lf_cache[i] = 0;
}
state -> lf_current = 0;
GC_REGISTER_FINALIZER(state, CORD_lf_close_proc, 0, 0, 0);
return(CORD_from_fn(CORD_lf_func, state, len));
}
CORD CORD_from_file_lazy(FILE * f)
{
register long len;
if (fseek(f, 0l, SEEK_END) != 0) {
ABORT("Bad fd argument - fseek failed");
}
if ((len = ftell(f)) < 0) {
ABORT("Bad fd argument - ftell failed");
}
rewind(f);
return(CORD_from_file_lazy_inner(f, (size_t)len));
}
# define LAZY_THRESHOLD (128*1024 + 1)
CORD CORD_from_file(FILE * f)
{
register long len;
if (fseek(f, 0l, SEEK_END) != 0) {
ABORT("Bad fd argument - fseek failed");
}
if ((len = ftell(f)) < 0) {
ABORT("Bad fd argument - ftell failed");
}
rewind(f);
if (len < LAZY_THRESHOLD) {
return(CORD_from_file_eager(f));
} else {
return(CORD_from_file_lazy_inner(f, (size_t)len));
}
}
+603
View File
@@ -0,0 +1,603 @@
/*
* Copyright (c) 1993-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*
* Author: Hans-J. Boehm ([email protected])
*/
/*
* A really simple-minded text editor based on cords.
* Things it does right:
* No size bounds.
* Inbounded undo.
* Shouldn't crash no matter what file you invoke it on (e.g. /vmunix)
* (Make sure /vmunix is not writable before you try this.)
* Scrolls horizontally.
* Things it does wrong:
* It doesn't handle tabs reasonably (use "expand" first).
* The command set is MUCH too small.
* The redisplay algorithm doesn't let curses do the scrolling.
* The rule for moving the window over the file is suboptimal.
*/
/* Boehm, February 6, 1995 12:27 pm PST */
/* Boehm, May 19, 1994 2:20 pm PDT */
#include <stdio.h>
#include "gc.h"
#include "cord.h"
#ifdef THINK_C
#define MACINTOSH
#include <ctype.h>
#endif
#if defined(__BORLANDC__) && !defined(WIN32)
/* If this is DOS or win16, we'll fail anyway. */
/* Might as well assume win32. */
# define WIN32
#endif
#if defined(WIN32)
# include <windows.h>
# include "de_win.h"
#elif defined(MACINTOSH)
# include <console.h>
/* curses emulation. */
# define initscr()
# define endwin()
# define nonl()
# define noecho() csetmode(C_NOECHO, stdout)
# define cbreak() csetmode(C_CBREAK, stdout)
# define refresh()
# define addch(c) putchar(c)
# define standout() cinverse(1, stdout)
# define standend() cinverse(0, stdout)
# define move(line,col) cgotoxy(col + 1, line + 1, stdout)
# define clrtoeol() ccleol(stdout)
# define de_error(s) { fprintf(stderr, s); getchar(); }
# define LINES 25
# define COLS 80
#else
# include <curses.h>
# define de_error(s) { fprintf(stderr, s); sleep(2); }
#endif
#include "de_cmds.h"
/* List of line number to position mappings, in descending order. */
/* There may be holes. */
typedef struct LineMapRep {
int line;
size_t pos;
struct LineMapRep * previous;
} * line_map;
/* List of file versions, one per edit operation */
typedef struct HistoryRep {
CORD file_contents;
struct HistoryRep * previous;
line_map map; /* Invalid for first record "now" */
} * history;
history now = 0;
CORD current; /* == now -> file_contents. */
size_t current_len; /* Current file length. */
line_map current_map = 0; /* Current line no. to pos. map */
size_t current_map_size = 0; /* Number of current_map entries. */
/* Not always accurate, but reset */
/* by prune_map. */
# define MAX_MAP_SIZE 3000
/* Current display position */
int dis_line = 0;
int dis_col = 0;
# define ALL -1
# define NONE - 2
int need_redisplay = 0; /* Line that needs to be redisplayed. */
/* Current cursor position. Always within file. */
int line = 0;
int col = 0;
size_t file_pos = 0; /* Character position corresponding to cursor. */
/* Invalidate line map for lines > i */
void invalidate_map(int i)
{
while(current_map -> line > i) {
current_map = current_map -> previous;
current_map_size--;
}
}
/* Reduce the number of map entries to save space for huge files. */
/* This also affects maps in histories. */
void prune_map()
{
line_map map = current_map;
int start_line = map -> line;
current_map_size = 0;
for(; map != 0; map = map -> previous) {
current_map_size++;
if (map -> line < start_line - LINES && map -> previous != 0) {
map -> previous = map -> previous -> previous;
}
}
}
/* Add mapping entry */
void add_map(int line, size_t pos)
{
line_map new_map = GC_NEW(struct LineMapRep);
if (current_map_size >= MAX_MAP_SIZE) prune_map();
new_map -> line = line;
new_map -> pos = pos;
new_map -> previous = current_map;
current_map = new_map;
current_map_size++;
}
/* Return position of column *c of ith line in */
/* current file. Adjust *c to be within the line.*/
/* A 0 pointer is taken as 0 column. */
/* Returns CORD_NOT_FOUND if i is too big. */
/* Assumes i > dis_line. */
size_t line_pos(int i, int *c)
{
int j;
size_t cur;
size_t next;
line_map map = current_map;
while (map -> line > i) map = map -> previous;
if (map -> line < i - 2) /* rebuild */ invalidate_map(i);
for (j = map -> line, cur = map -> pos; j < i;) {
cur = CORD_chr(current, cur, '\n');
if (cur == current_len-1) return(CORD_NOT_FOUND);
cur++;
if (++j > current_map -> line) add_map(j, cur);
}
if (c != 0) {
next = CORD_chr(current, cur, '\n');
if (next == CORD_NOT_FOUND) next = current_len - 1;
if (next < cur + *c) {
*c = next - cur;
}
cur += *c;
}
return(cur);
}
void add_hist(CORD s)
{
history new_file = GC_NEW(struct HistoryRep);
new_file -> file_contents = current = s;
current_len = CORD_len(s);
new_file -> previous = now;
if (now != 0) now -> map = current_map;
now = new_file;
}
void del_hist(void)
{
now = now -> previous;
current = now -> file_contents;
current_map = now -> map;
current_len = CORD_len(current);
}
/* Current screen_contents; a dynamically allocated array of CORDs */
CORD * screen = 0;
int screen_size = 0;
# ifndef WIN32
/* Replace a line in the curses stdscr. All control characters are */
/* displayed as upper case characters in standout mode. This isn't */
/* terribly appropriate for tabs. */
void replace_line(int i, CORD s)
{
register int c;
CORD_pos p;
size_t len = CORD_len(s);
if (screen == 0 || LINES > screen_size) {
screen_size = LINES;
screen = (CORD *)GC_MALLOC(screen_size * sizeof(CORD));
}
# if !defined(MACINTOSH)
/* A gross workaround for an apparent curses bug: */
if (i == LINES-1 && len == COLS) {
s = CORD_substr(s, 0, CORD_len(s) - 1);
}
# endif
if (CORD_cmp(screen[i], s) != 0) {
move(i, 0); clrtoeol(); move(i,0);
CORD_FOR (p, s) {
c = CORD_pos_fetch(p) & 0x7f;
if (iscntrl(c)) {
standout(); addch(c + 0x40); standend();
} else {
addch(c);
}
}
screen[i] = s;
}
}
#else
# define replace_line(i,s) invalidate_line(i)
#endif
/* Return up to COLS characters of the line of s starting at pos, */
/* returning only characters after the given column. */
CORD retrieve_line(CORD s, size_t pos, unsigned column)
{
CORD candidate = CORD_substr(s, pos, column + COLS);
/* avoids scanning very long lines */
int eol = CORD_chr(candidate, 0, '\n');
int len;
if (eol == CORD_NOT_FOUND) eol = CORD_len(candidate);
len = (int)eol - (int)column;
if (len < 0) len = 0;
return(CORD_substr(s, pos + column, len));
}
# ifdef WIN32
# define refresh();
CORD retrieve_screen_line(int i)
{
register size_t pos;
invalidate_map(dis_line + LINES); /* Prune search */
pos = line_pos(dis_line + i, 0);
if (pos == CORD_NOT_FOUND) return(CORD_EMPTY);
return(retrieve_line(current, pos, dis_col));
}
# endif
/* Display the visible section of the current file */
void redisplay(void)
{
register int i;
invalidate_map(dis_line + LINES); /* Prune search */
for (i = 0; i < LINES; i++) {
if (need_redisplay == ALL || need_redisplay == i) {
register size_t pos = line_pos(dis_line + i, 0);
if (pos == CORD_NOT_FOUND) break;
replace_line(i, retrieve_line(current, pos, dis_col));
if (need_redisplay == i) goto done;
}
}
for (; i < LINES; i++) replace_line(i, CORD_EMPTY);
done:
refresh();
need_redisplay = NONE;
}
int dis_granularity;
/* Update dis_line, dis_col, and dis_pos to make cursor visible. */
/* Assumes line, col, dis_line, dis_pos are in bounds. */
void normalize_display()
{
int old_line = dis_line;
int old_col = dis_col;
dis_granularity = 1;
if (LINES > 15 && COLS > 15) dis_granularity = 2;
while (dis_line > line) dis_line -= dis_granularity;
while (dis_col > col) dis_col -= dis_granularity;
while (line >= dis_line + LINES) dis_line += dis_granularity;
while (col >= dis_col + COLS) dis_col += dis_granularity;
if (old_line != dis_line || old_col != dis_col) {
need_redisplay = ALL;
}
}
# if defined(WIN32)
# elif defined(MACINTOSH)
# define move_cursor(x,y) cgotoxy(x + 1, y + 1, stdout)
# else
# define move_cursor(x,y) move(y,x)
# endif
/* Adjust display so that cursor is visible; move cursor into position */
/* Update screen if necessary. */
void fix_cursor(void)
{
normalize_display();
if (need_redisplay != NONE) redisplay();
move_cursor(col - dis_col, line - dis_line);
refresh();
# ifndef WIN32
fflush(stdout);
# endif
}
/* Make sure line, col, and dis_pos are somewhere inside file. */
/* Recompute file_pos. Assumes dis_pos is accurate or past eof */
void fix_pos()
{
int my_col = col;
if ((size_t)line > current_len) line = current_len;
file_pos = line_pos(line, &my_col);
if (file_pos == CORD_NOT_FOUND) {
for (line = current_map -> line, file_pos = current_map -> pos;
file_pos < current_len;
line++, file_pos = CORD_chr(current, file_pos, '\n') + 1);
line--;
file_pos = line_pos(line, &col);
} else {
col = my_col;
}
}
#if defined(WIN32)
# define beep() Beep(1000 /* Hz */, 300 /* msecs */)
#elif defined(MACINTOSH)
# define beep() SysBeep(1)
#else
/*
* beep() is part of some curses packages and not others.
* We try to match the type of the builtin one, if any.
*/
#ifdef __STDC__
int beep(void)
#else
int beep()
#endif
{
putc('\007', stderr);
return(0);
}
#endif
# define NO_PREFIX -1
# define BARE_PREFIX -2
int repeat_count = NO_PREFIX; /* Current command prefix. */
int locate_mode = 0; /* Currently between 2 ^Ls */
CORD locate_string = CORD_EMPTY; /* Current search string. */
char * arg_file_name;
#ifdef WIN32
/* Change the current position to whatever is currently displayed at */
/* the given SCREEN coordinates. */
void set_position(int c, int l)
{
line = l + dis_line;
col = c + dis_col;
fix_pos();
move_cursor(col - dis_col, line - dis_line);
}
#endif /* WIN32 */
/* Perform the command associated with character c. C may be an */
/* integer > 256 denoting a windows command, one of the above control */
/* characters, or another ASCII character to be used as either a */
/* character to be inserted, a repeat count, or a search string, */
/* depending on the current state. */
void do_command(int c)
{
int i;
int need_fix_pos;
FILE * out;
if ( c == '\r') c = '\n';
if (locate_mode) {
size_t new_pos;
if (c == LOCATE) {
locate_mode = 0;
locate_string = CORD_EMPTY;
return;
}
locate_string = CORD_cat_char(locate_string, (char)c);
new_pos = CORD_str(current, file_pos - CORD_len(locate_string) + 1,
locate_string);
if (new_pos != CORD_NOT_FOUND) {
need_redisplay = ALL;
new_pos += CORD_len(locate_string);
for (;;) {
file_pos = line_pos(line + 1, 0);
if (file_pos > new_pos) break;
line++;
}
col = new_pos - line_pos(line, 0);
file_pos = new_pos;
fix_cursor();
} else {
locate_string = CORD_substr(locate_string, 0,
CORD_len(locate_string) - 1);
beep();
}
return;
}
if (c == REPEAT) {
repeat_count = BARE_PREFIX; return;
} else if (c < 0x100 && isdigit(c)){
if (repeat_count == BARE_PREFIX) {
repeat_count = c - '0'; return;
} else if (repeat_count != NO_PREFIX) {
repeat_count = 10 * repeat_count + c - '0'; return;
}
}
if (repeat_count == NO_PREFIX) repeat_count = 1;
if (repeat_count == BARE_PREFIX && (c == UP || c == DOWN)) {
repeat_count = LINES - dis_granularity;
}
if (repeat_count == BARE_PREFIX) repeat_count = 8;
need_fix_pos = 0;
for (i = 0; i < repeat_count; i++) {
switch(c) {
case LOCATE:
locate_mode = 1;
break;
case TOP:
line = col = file_pos = 0;
break;
case UP:
if (line != 0) {
line--;
need_fix_pos = 1;
}
break;
case DOWN:
line++;
need_fix_pos = 1;
break;
case LEFT:
if (col != 0) {
col--; file_pos--;
}
break;
case RIGHT:
if (CORD_fetch(current, file_pos) == '\n') break;
col++; file_pos++;
break;
case UNDO:
del_hist();
need_redisplay = ALL; need_fix_pos = 1;
break;
case BS:
if (col == 0) {
beep();
break;
}
col--; file_pos--;
/* fall through: */
case DEL:
if (file_pos == current_len-1) break;
/* Can't delete trailing newline */
if (CORD_fetch(current, file_pos) == '\n') {
need_redisplay = ALL; need_fix_pos = 1;
} else {
need_redisplay = line - dis_line;
}
add_hist(CORD_cat(
CORD_substr(current, 0, file_pos),
CORD_substr(current, file_pos+1, current_len)));
invalidate_map(line);
break;
case WRITE:
{
CORD name = CORD_cat(CORD_from_char_star(arg_file_name),
".new");
if ((out = fopen(CORD_to_const_char_star(name), "wb")) == NULL
|| CORD_put(current, out) == EOF) {
de_error("Write failed\n");
need_redisplay = ALL;
} else {
fclose(out);
}
}
break;
default:
{
CORD left_part = CORD_substr(current, 0, file_pos);
CORD right_part = CORD_substr(current, file_pos, current_len);
add_hist(CORD_cat(CORD_cat_char(left_part, (char)c),
right_part));
invalidate_map(line);
if (c == '\n') {
col = 0; line++; file_pos++;
need_redisplay = ALL;
} else {
col++; file_pos++;
need_redisplay = line - dis_line;
}
break;
}
}
}
if (need_fix_pos) fix_pos();
fix_cursor();
repeat_count = NO_PREFIX;
}
/* OS independent initialization */
void generic_init(void)
{
FILE * f;
CORD initial;
if ((f = fopen(arg_file_name, "rb")) == NULL) {
initial = "\n";
} else {
initial = CORD_from_file(f);
if (initial == CORD_EMPTY
|| CORD_fetch(initial, CORD_len(initial)-1) != '\n') {
initial = CORD_cat(initial, "\n");
}
}
add_map(0,0);
add_hist(initial);
now -> map = current_map;
now -> previous = now; /* Can't back up further: beginning of the world */
need_redisplay = ALL;
fix_cursor();
}
#ifndef WIN32
main(argc, argv)
int argc;
char ** argv;
{
int c;
#if defined(MACINTOSH)
console_options.title = "\pDumb Editor";
cshow(stdout);
argc = ccommand(&argv);
#endif
GC_INIT();
if (argc != 2) goto usage;
arg_file_name = argv[1];
setvbuf(stdout, GC_MALLOC_ATOMIC(8192), _IOFBF, 8192);
initscr();
noecho(); nonl(); cbreak();
generic_init();
while ((c = getchar()) != QUIT) {
if (c == EOF) break;
do_command(c);
}
done:
move(LINES-1, 0);
clrtoeol();
refresh();
nl();
echo();
endwin();
exit(0);
usage:
fprintf(stderr, "Usage: %s file\n", argv[0]);
fprintf(stderr, "Cursor keys: ^B(left) ^F(right) ^P(up) ^N(down)\n");
fprintf(stderr, "Undo: ^U Write to <file>.new: ^W");
fprintf(stderr, "Quit:^D Repeat count: ^R[n]\n");
fprintf(stderr, "Top: ^T Locate (search, find): ^L text ^L\n");
exit(1);
}
#endif /* !WIN32 */
+33
View File
@@ -0,0 +1,33 @@
/*
* Copyright (c) 1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, May 19, 1994 2:24 pm PDT */
#ifndef DE_CMDS_H
# define DE_CMDS_H
# define UP 16 /* ^P */
# define DOWN 14 /* ^N */
# define LEFT 2 /* ^B */
# define RIGHT 6 /* ^F */
# define DEL 127 /* ^? */
# define BS 8 /* ^H */
# define UNDO 21 /* ^U */
# define WRITE 23 /* ^W */
# define QUIT 4 /* ^D */
# define REPEAT 18 /* ^R */
# define LOCATE 12 /* ^L */
# define TOP 20 /* ^T */
#endif
BIN
View File
Binary file not shown.

After

Width:  |  Height:  |  Size: 766 B

+78
View File
@@ -0,0 +1,78 @@
/*
* Copyright (c) 1991-1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to copy this garbage collector for any purpose,
* provided the above notices are retained on all copies.
*/
/* Boehm, May 13, 1994 9:50 am PDT */
#include "windows.h"
#include "de_cmds.h"
#include "de_win.h"
ABOUTBOX DIALOG 19, 21, 163, 47
STYLE DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU
CAPTION "About Demonstration Text Editor"
BEGIN
ICON "DE", -1, 8, 8, 13, 13, WS_CHILD | WS_VISIBLE
LTEXT "Demonstration Text Editor", -1, 44, 8, 118, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
LTEXT "Version 4.1", -1, 44, 16, 60, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
PUSHBUTTON "OK", IDOK, 118, 27, 24, 14, WS_CHILD | WS_VISIBLE | WS_TABSTOP
END
DE MENU
BEGIN
POPUP "&File"
BEGIN
MENUITEM "&Save\t^W", IDM_FILESAVE
MENUITEM "E&xit\t^D", IDM_FILEEXIT
END
POPUP "&Edit"
BEGIN
MENUITEM "Page &Down\t^R^N", IDM_EDITPDOWN
MENUITEM "Page &Up\t^R^P", IDM_EDITPUP
MENUITEM "U&ndo\t^U", IDM_EDITUNDO
MENUITEM "&Locate\t^L ... ^L", IDM_EDITLOCATE
MENUITEM "D&own\t^N", IDM_EDITDOWN
MENUITEM "U&p\t^P", IDM_EDITUP
MENUITEM "Le&ft\t^B", IDM_EDITLEFT
MENUITEM "&Right\t^F", IDM_EDITRIGHT
MENUITEM "Delete &Backward\tBS", IDM_EDITBS
MENUITEM "Delete F&orward\tDEL", IDM_EDITDEL
MENUITEM "&Top\t^T", IDM_EDITTOP
END
POPUP "&Help"
BEGIN
MENUITEM "&Contents", IDM_HELPCONTENTS
MENUITEM "&About...", IDM_HELPABOUT
END
MENUITEM "Page_&Down", IDM_EDITPDOWN
MENUITEM "Page_&Up", IDM_EDITPUP
END
DE ACCELERATORS
BEGIN
"^R", IDM_EDITREPEAT
"^N", IDM_EDITDOWN
"^P", IDM_EDITUP
"^L", IDM_EDITLOCATE
"^B", IDM_EDITLEFT
"^F", IDM_EDITRIGHT
"^T", IDM_EDITTOP
VK_DELETE, IDM_EDITDEL, VIRTKEY
VK_BACK, IDM_EDITBS, VIRTKEY
END
DE ICON cord\de_win.ICO
+366
View File
@@ -0,0 +1,366 @@
/*
* Copyright (c) 1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, February 6, 1995 12:29 pm PST */
/*
* The MS Windows specific part of de.
* This started as the generic Windows application template
* made available by Rob Haack ([email protected]), but
* significant parts didn't survive to the final version.
*
* This was written by a nonexpert windows programmer.
*/
#include "windows.h"
#include "gc.h"
#include "cord.h"
#include "de_cmds.h"
#include "de_win.h"
int LINES = 0;
int COLS = 0;
char szAppName[] = "DE";
char FullAppName[] = "Demonstration Editor";
HWND hwnd;
void de_error(char *s)
{
MessageBox( hwnd, (LPSTR) s,
(LPSTR) FullAppName,
MB_ICONINFORMATION | MB_OK );
InvalidateRect(hwnd, NULL, TRUE);
}
int APIENTRY WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPSTR command_line, int nCmdShow)
{
MSG msg;
WNDCLASS wndclass;
HANDLE hAccel;
if (!hPrevInstance)
{
wndclass.style = CS_HREDRAW | CS_VREDRAW;
wndclass.lpfnWndProc = WndProc;
wndclass.cbClsExtra = 0;
wndclass.cbWndExtra = DLGWINDOWEXTRA;
wndclass.hInstance = hInstance;
wndclass.hIcon = LoadIcon (hInstance, szAppName);
wndclass.hCursor = LoadCursor (NULL, IDC_ARROW);
wndclass.hbrBackground = GetStockObject(WHITE_BRUSH);
wndclass.lpszMenuName = "DE";
wndclass.lpszClassName = szAppName;
if (RegisterClass (&wndclass) == 0) {
char buf[50];
sprintf(buf, "RegisterClass: error code: 0x%X", GetLastError());
de_error(buf);
return(0);
}
}
/* Empirically, the command line does not include the command name ...
if (command_line != 0) {
while (isspace(*command_line)) command_line++;
while (*command_line != 0 && !isspace(*command_line)) command_line++;
while (isspace(*command_line)) command_line++;
} */
if (command_line == 0 || *command_line == 0) {
de_error("File name argument required");
return( 0 );
} else {
char *p = command_line;
while (*p != 0 && !isspace(*p)) p++;
arg_file_name = CORD_to_char_star(
CORD_substr(command_line, 0, p - command_line));
}
hwnd = CreateWindow (szAppName,
FullAppName,
WS_OVERLAPPEDWINDOW | WS_CAPTION, /* Window style */
CW_USEDEFAULT, 0, /* default pos. */
CW_USEDEFAULT, 0, /* default width, height */
NULL, /* No parent */
NULL, /* Window class menu */
hInstance, NULL);
if (hwnd == NULL) {
char buf[50];
sprintf(buf, "CreateWindow: error code: 0x%X", GetLastError());
de_error(buf);
return(0);
}
ShowWindow (hwnd, nCmdShow);
hAccel = LoadAccelerators( hInstance, szAppName );
while (GetMessage (&msg, NULL, 0, 0))
{
if( !TranslateAccelerator( hwnd, hAccel, &msg ) )
{
TranslateMessage (&msg);
DispatchMessage (&msg);
}
}
return msg.wParam;
}
/* Return the argument with all control characters replaced by blanks. */
char * plain_chars(char * text, size_t len)
{
char * result = GC_MALLOC_ATOMIC(len + 1);
register size_t i;
for (i = 0; i < len; i++) {
if (iscntrl(text[i])) {
result[i] = ' ';
} else {
result[i] = text[i];
}
}
result[len] = '\0';
return(result);
}
/* Return the argument with all non-control-characters replaced by */
/* blank, and all control characters c replaced by c + 32. */
char * control_chars(char * text, size_t len)
{
char * result = GC_MALLOC_ATOMIC(len + 1);
register size_t i;
for (i = 0; i < len; i++) {
if (iscntrl(text[i])) {
result[i] = text[i] + 0x40;
} else {
result[i] = ' ';
}
}
result[len] = '\0';
return(result);
}
int char_width;
int char_height;
void get_line_rect(int line, int win_width, RECT * rectp)
{
rectp -> top = line * char_height;
rectp -> bottom = rectp->top + char_height;
rectp -> left = 0;
rectp -> right = win_width;
}
int caret_visible = 0; /* Caret is currently visible. */
int screen_was_painted = 0;/* Screen has been painted at least once. */
void update_cursor(void);
LRESULT CALLBACK WndProc (HWND hwnd, UINT message,
WPARAM wParam, LPARAM lParam)
{
static FARPROC lpfnAboutBox;
static HANDLE hInstance;
HDC dc;
PAINTSTRUCT ps;
RECT client_area;
RECT this_line;
RECT dummy;
TEXTMETRIC tm;
register int i;
int id;
switch (message)
{
case WM_CREATE:
hInstance = ( (LPCREATESTRUCT) lParam)->hInstance;
lpfnAboutBox = MakeProcInstance( (FARPROC) AboutBox, hInstance );
dc = GetDC(hwnd);
SelectObject(dc, GetStockObject(SYSTEM_FIXED_FONT));
GetTextMetrics(dc, &tm);
ReleaseDC(hwnd, dc);
char_width = tm.tmAveCharWidth;
char_height = tm.tmHeight + tm.tmExternalLeading;
GetClientRect(hwnd, &client_area);
COLS = (client_area.right - client_area.left)/char_width;
LINES = (client_area.bottom - client_area.top)/char_height;
generic_init();
return(0);
case WM_CHAR:
if (wParam == QUIT) {
SendMessage( hwnd, WM_CLOSE, 0, 0L );
} else {
do_command(wParam);
}
return(0);
case WM_SETFOCUS:
CreateCaret(hwnd, NULL, char_width, char_height);
ShowCaret(hwnd);
caret_visible = 1;
update_cursor();
return(0);
case WM_KILLFOCUS:
HideCaret(hwnd);
DestroyCaret();
caret_visible = 0;
return(0);
case WM_LBUTTONUP:
{
unsigned xpos = LOWORD(lParam); /* From left */
unsigned ypos = HIWORD(lParam); /* from top */
set_position( xpos/char_width, ypos/char_height );
return(0);
}
case WM_COMMAND:
id = LOWORD(wParam);
if (id & EDIT_CMD_FLAG) {
if (id & REPEAT_FLAG) do_command(REPEAT);
do_command(CHAR_CMD(id));
return( 0 );
} else {
switch(id) {
case IDM_FILEEXIT:
SendMessage( hwnd, WM_CLOSE, 0, 0L );
return( 0 );
case IDM_HELPABOUT:
if( DialogBox( hInstance, "ABOUTBOX",
hwnd, lpfnAboutBox ) )
InvalidateRect( hwnd, NULL, TRUE );
return( 0 );
case IDM_HELPCONTENTS:
de_error(
"Cursor keys: ^B(left) ^F(right) ^P(up) ^N(down)\n"
"Undo: ^U Write: ^W Quit:^D Repeat count: ^R[n]\n"
"Top: ^T Locate (search, find): ^L text ^L\n");
return( 0 );
}
}
break;
case WM_CLOSE:
DestroyWindow( hwnd );
return 0;
case WM_DESTROY:
PostQuitMessage (0);
GC_win32_free_heap();
return 0;
case WM_PAINT:
dc = BeginPaint(hwnd, &ps);
GetClientRect(hwnd, &client_area);
COLS = (client_area.right - client_area.left)/char_width;
LINES = (client_area.bottom - client_area.top)/char_height;
SelectObject(dc, GetStockObject(SYSTEM_FIXED_FONT));
for (i = 0; i < LINES; i++) {
get_line_rect(i, client_area.right, &this_line);
if (IntersectRect(&dummy, &this_line, &ps.rcPaint)) {
CORD raw_line = retrieve_screen_line(i);
size_t len = CORD_len(raw_line);
char * text = CORD_to_char_star(raw_line);
/* May contain embedded NULLs */
char * plain = plain_chars(text, len);
char * blanks = CORD_to_char_star(CORD_chars(' ',
COLS - len));
char * control = control_chars(text, len);
# define RED RGB(255,0,0)
SetBkMode(dc, OPAQUE);
SetTextColor(dc, GetSysColor(COLOR_WINDOWTEXT));
TextOut(dc, this_line.left, this_line.top,
plain, len);
TextOut(dc, this_line.left + len * char_width, this_line.top,
blanks, COLS - len);
SetBkMode(dc, TRANSPARENT);
SetTextColor(dc, RED);
TextOut(dc, this_line.left, this_line.top,
control, strlen(control));
}
}
EndPaint(hwnd, &ps);
screen_was_painted = 1;
return 0;
}
return DefWindowProc (hwnd, message, wParam, lParam);
}
int last_col;
int last_line;
void move_cursor(int c, int l)
{
last_col = c;
last_line = l;
if (caret_visible) update_cursor();
}
void update_cursor(void)
{
SetCaretPos(last_col * char_width, last_line * char_height);
ShowCaret(hwnd);
}
void invalidate_line(int i)
{
RECT line;
if (!screen_was_painted) return;
/* Invalidating a rectangle before painting seems result in a */
/* major performance problem. */
get_line_rect(i, COLS*char_width, &line);
InvalidateRect(hwnd, &line, FALSE);
}
LRESULT CALLBACK AboutBox( HWND hDlg, UINT message,
WPARAM wParam, LPARAM lParam )
{
switch( message )
{
case WM_INITDIALOG:
SetFocus( GetDlgItem( hDlg, IDOK ) );
break;
case WM_COMMAND:
switch( wParam )
{
case IDOK:
EndDialog( hDlg, TRUE );
break;
}
break;
case WM_CLOSE:
EndDialog( hDlg, TRUE );
return TRUE;
}
return FALSE;
}
+103
View File
@@ -0,0 +1,103 @@
/*
* Copyright (c) 1994 by Xerox Corporation. All rights reserved.
*
* THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
* OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
*
* Permission is hereby granted to use or copy this program
* for any purpose, provided the above notices are retained on all copies.
* Permission to modify the code and to distribute modified code is granted,
* provided the above notices are retained, and a notice that the code was
* modified is included with the above copyright notice.
*/
/* Boehm, May 19, 1994 2:25 pm PDT */
/* cord.h, de_cmds.h, and windows.h should be included before this. */
# define OTHER_FLAG 0x100
# define EDIT_CMD_FLAG 0x200
# define REPEAT_FLAG 0x400
# define CHAR_CMD(i) ((i) & 0xff)
/* MENU: DE */
#define IDM_FILESAVE (EDIT_CMD_FLAG + WRITE)
#define IDM_FILEEXIT (OTHER_FLAG + 1)
#define IDM_HELPABOUT (OTHER_FLAG + 2)
#define IDM_HELPCONTENTS (OTHER_FLAG + 3)
#define IDM_EDITPDOWN (REPEAT_FLAG + EDIT_CMD_FLAG + DOWN)
#define IDM_EDITPUP (REPEAT_FLAG + EDIT_CMD_FLAG + UP)
#define IDM_EDITUNDO (EDIT_CMD_FLAG + UNDO)
#define IDM_EDITLOCATE (EDIT_CMD_FLAG + LOCATE)
#define IDM_EDITDOWN (EDIT_CMD_FLAG + DOWN)
#define IDM_EDITUP (EDIT_CMD_FLAG + UP)
#define IDM_EDITLEFT (EDIT_CMD_FLAG + LEFT)
#define IDM_EDITRIGHT (EDIT_CMD_FLAG + RIGHT)
#define IDM_EDITBS (EDIT_CMD_FLAG + BS)
#define IDM_EDITDEL (EDIT_CMD_FLAG + DEL)
#define IDM_EDITREPEAT (EDIT_CMD_FLAG + REPEAT)
#define IDM_EDITTOP (EDIT_CMD_FLAG + TOP)
/* Windows UI stuff */
LRESULT CALLBACK WndProc (HWND hwnd, UINT message,
UINT wParam, LONG lParam);
LRESULT CALLBACK AboutBox( HWND hDlg, UINT message,
UINT wParam, LONG lParam );
/* Screen dimensions. Maintained by de_win.c. */
extern int LINES;
extern int COLS;
/* File being edited. */
extern char * arg_file_name;
/* Current display position in file. Maintained by de.c */
extern int dis_line;
extern int dis_col;
/* Current cursor position in file. */
extern int line;
extern int col;
/*
* Calls from de_win.c to de.c
*/
CORD retrieve_screen_line(int i);
/* Get the contents of i'th screen line. */
/* Relies on COLS. */
void set_position(int x, int y);
/* Set column, row. Upper left of window = (0,0). */
void do_command(int);
/* Execute an editor command. */
/* Agument is a command character or one */
/* of the IDM_ commands. */
void generic_init(void);
/* OS independent initialization */
/*
* Calls from de.c to de_win.c
*/
void move_cursor(int column, int line);
/* Physically move the cursor on the display, */
/* so that it appears at */
/* (column, line). */
void invalidate_line(int line);
/* Invalidate line i on the screen. */
void de_error(char *s);
/* Display error message. */
+736
View File
@@ -0,0 +1,736 @@
#include "private/pthread_support.h"
# if defined(GC_DARWIN_THREADS)
#include <AvailabilityMacros.h>
#include "mono/utils/mono-compiler.h"
/* From "Inside Mac OS X - Mach-O Runtime Architecture" published by Apple
Page 49:
"The space beneath the stack pointer, where a new stack frame would normally
be allocated, is called the red zone. This area as shown in Figure 3-2 may
be used for any purpose as long as a new stack frame does not need to be
added to the stack."
Page 50: "If a leaf procedure's red zone usage would exceed 224 bytes, then
it must set up a stack frame just like routines that call other routines."
*/
#ifdef POWERPC
# if CPP_WORDSZ == 32
# define PPC_RED_ZONE_SIZE 224
# elif CPP_WORDSZ == 64
# define PPC_RED_ZONE_SIZE 320
# endif
#endif
typedef struct StackFrame {
unsigned long savedSP;
unsigned long savedCR;
unsigned long savedLR;
unsigned long reserved[2];
unsigned long savedRTOC;
} StackFrame;
unsigned long FindTopOfStack(unsigned int stack_start) {
StackFrame *frame;
if (stack_start == 0) {
# ifdef POWERPC
# if CPP_WORDSZ == 32
__asm__ volatile("lwz %0,0(r1)" : "=r" (frame));
# else
__asm__ volatile("ldz %0,0(r1)" : "=r" (frame));
# endif
# endif
} else {
frame = (StackFrame *)stack_start;
}
# ifdef DEBUG_THREADS
/* GC_printf1("FindTopOfStack start at sp = %p\n", frame); */
# endif
do {
if (frame->savedSP == 0) break;
/* if there are no more stack frames, stop */
frame = (StackFrame*)frame->savedSP;
/* we do these next two checks after going to the next frame
because the LR for the first stack frame in the loop
is not set up on purpose, so we shouldn't check it. */
if ((frame->savedLR & ~3) == 0) break; /* if the next LR is bogus, stop */
if ((~(frame->savedLR) & ~3) == 0) break; /* ditto */
} while (1);
# ifdef DEBUG_THREADS
/* GC_printf1("FindTopOfStack finish at sp = %p\n", frame); */
# endif
return (unsigned long)frame;
}
#ifdef DARWIN_DONT_PARSE_STACK
void GC_push_all_stacks() {
int i;
kern_return_t r;
GC_thread p;
pthread_t me;
ptr_t lo, hi, altstack_lo, altstack_hi;
#if defined(POWERPC)
ppc_thread_state_t state;
mach_msg_type_number_t thread_state_count = PPC_THREAD_STATE_COUNT;
#elif defined(I386)
i386_thread_state_t state;
mach_msg_type_number_t thread_state_count = i386_THREAD_STATE_COUNT;
#elif defined(ARM)
arm_thread_state_t state;
mach_msg_type_number_t thread_state_count = ARM_THREAD_STATE_COUNT;
#elif defined(X86_64)
x86_thread_state64_t state;
mach_msg_type_number_t thread_state_count = x86_THREAD_STATE64_COUNT;
#else
# error FIXME for non-x86 || ppc architectures
mach_msg_type_number_t thread_state_count = MACHINE_THREAD_STATE_COUNT;
#endif
me = pthread_self();
if (!GC_thr_initialized) GC_thr_init();
for(i=0;i<THREAD_TABLE_SZ;i++) {
for(p=GC_threads[i];p!=0;p=p->next) {
if(p -> flags & FINISHED) continue;
if(pthread_equal(p->id,me)) {
lo = GC_approx_sp();
} else {
/* Get the thread state (registers, etc) */
r = thread_get_state(
p->stop_info.mach_thread,
GC_MACH_THREAD_STATE_FLAVOR,
(natural_t*)&state,
&thread_state_count);
if(r != KERN_SUCCESS) continue;
#if defined(I386)
#if defined (TARGET_IOS) || (MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_5)
lo = state.__esp;
GC_push_one(state.__eax);
GC_push_one(state.__ebx);
GC_push_one(state.__ecx);
GC_push_one(state.__edx);
GC_push_one(state.__edi);
GC_push_one(state.__esi);
GC_push_one(state.__ebp);
#else
lo = state.esp;
GC_push_one(state.eax);
GC_push_one(state.ebx);
GC_push_one(state.ecx);
GC_push_one(state.edx);
GC_push_one(state.edi);
GC_push_one(state.esi);
GC_push_one(state.ebp);
#endif
#elif defined(X86_64)
lo = state.__rsp;
GC_push_one(state.__rax);
GC_push_one(state.__rbx);
GC_push_one(state.__rcx);
GC_push_one(state.__rdx);
GC_push_one(state.__rdi);
GC_push_one(state.__rsi);
GC_push_one(state.__rbp);
GC_push_one(state.__r8);
GC_push_one(state.__r9);
GC_push_one(state.__r10);
GC_push_one(state.__r11);
GC_push_one(state.__r12);
GC_push_one(state.__r13);
GC_push_one(state.__r14);
GC_push_one(state.__r15);
#elif defined(POWERPC)
#if defined(_STRUCT_PPC_EXCEPTION_STATE) && defined(__DARWIN_UNIX03)
lo = (void*)(state.__r1 - PPC_RED_ZONE_SIZE);
GC_push_one(state.__r0);
GC_push_one(state.__r2);
GC_push_one(state.__r3);
GC_push_one(state.__r4);
GC_push_one(state.__r5);
GC_push_one(state.__r6);
GC_push_one(state.__r7);
GC_push_one(state.__r8);
GC_push_one(state.__r9);
GC_push_one(state.__r10);
GC_push_one(state.__r11);
GC_push_one(state.__r12);
GC_push_one(state.__r13);
GC_push_one(state.__r14);
GC_push_one(state.__r15);
GC_push_one(state.__r16);
GC_push_one(state.__r17);
GC_push_one(state.__r18);
GC_push_one(state.__r19);
GC_push_one(state.__r20);
GC_push_one(state.__r21);
GC_push_one(state.__r22);
GC_push_one(state.__r23);
GC_push_one(state.__r24);
GC_push_one(state.__r25);
GC_push_one(state.__r26);
GC_push_one(state.__r27);
GC_push_one(state.__r28);
GC_push_one(state.__r29);
GC_push_one(state.__r30);
GC_push_one(state.__r31);
#else
lo = (void*)(state.r1 - PPC_RED_ZONE_SIZE);
GC_push_one(state.r0);
GC_push_one(state.r2);
GC_push_one(state.r3);
GC_push_one(state.r4);
GC_push_one(state.r5);
GC_push_one(state.r6);
GC_push_one(state.r7);
GC_push_one(state.r8);
GC_push_one(state.r9);
GC_push_one(state.r10);
GC_push_one(state.r11);
GC_push_one(state.r12);
GC_push_one(state.r13);
GC_push_one(state.r14);
GC_push_one(state.r15);
GC_push_one(state.r16);
GC_push_one(state.r17);
GC_push_one(state.r18);
GC_push_one(state.r19);
GC_push_one(state.r20);
GC_push_one(state.r21);
GC_push_one(state.r22);
GC_push_one(state.r23);
GC_push_one(state.r24);
GC_push_one(state.r25);
GC_push_one(state.r26);
GC_push_one(state.r27);
GC_push_one(state.r28);
GC_push_one(state.r29);
GC_push_one(state.r30);
GC_push_one(state.r31);
#endif
#elif defined(ARM)
lo = (void*)state.__sp;
GC_push_one(state.__r[0]);
GC_push_one(state.__r[1]);
GC_push_one(state.__r[2]);
GC_push_one(state.__r[3]);
GC_push_one(state.__r[4]);
GC_push_one(state.__r[5]);
GC_push_one(state.__r[6]);
GC_push_one(state.__r[7]);
GC_push_one(state.__r[8]);
GC_push_one(state.__r[9]);
GC_push_one(state.__r[10]);
GC_push_one(state.__r[11]);
GC_push_one(state.__r[12]);
/* GC_push_one(state.__sp); */
GC_push_one(state.__lr);
GC_push_one(state.__pc);
GC_push_one(state.__cpsr);
#else
# error FIXME for non-x86 || ppc architectures
#endif
} /* p != me */
if(p->flags & MAIN_THREAD)
hi = GC_stackbottom;
else
hi = p->stack_end;
if (p->altstack && lo >= p->altstack && lo <= p->altstack + p->altstack_size) {
altstack_lo = lo;
altstack_hi = p->altstack + p->altstack_size;
lo = (char*)p->stack;
hi = (char*)p->stack + p->stack_size;
} else {
altstack_lo = NULL;
}
#if DEBUG_THREADS
GC_printf3("Darwin: Stack for thread 0x%lx = [%lx,%lx)\n",
(unsigned long) p -> id,
(unsigned long) lo,
(unsigned long) hi
);
#endif
if (lo)
GC_push_all_stack(lo,hi);
if (altstack_lo)
GC_push_all_stack(altstack_lo,altstack_hi);
} /* for(p=GC_threads[i]...) */
} /* for(i=0;i<THREAD_TABLE_SZ...) */
}
#else /* !DARWIN_DONT_PARSE_STACK; Use FindTopOfStack() */
void GC_push_all_stacks() {
int i;
task_t my_task;
kern_return_t r;
mach_port_t me;
ptr_t lo, hi;
thread_act_array_t act_list = 0;
mach_msg_type_number_t listcount = 0;
me = mach_thread_self();
if (!GC_thr_initialized) GC_thr_init();
my_task = current_task();
r = task_threads(my_task, &act_list, &listcount);
if(r != KERN_SUCCESS) ABORT("task_threads failed");
for(i = 0; i < listcount; i++) {
thread_act_t thread = act_list[i];
if (thread == me) {
lo = GC_approx_sp();
hi = (ptr_t)FindTopOfStack(0);
} else {
# if defined(POWERPC)
# if CPP_WORDSZ == 32
ppc_thread_state_t info;
# else
ppc_thread_state64_t info;
# endif
mach_msg_type_number_t outCount = THREAD_STATE_MAX;
r = thread_get_state(thread, GC_MACH_THREAD_STATE_FLAVOR,
(natural_t *)&info, &outCount);
if(r != KERN_SUCCESS) continue;
#if defined(_STRUCT_PPC_EXCEPTION_STATE)
lo = (void*)(info.__r1 - PPC_RED_ZONE_SIZE);
hi = (ptr_t)FindTopOfStack(info.__r1);
GC_push_one(info.__r0);
GC_push_one(info.__r2);
GC_push_one(info.__r3);
GC_push_one(info.__r4);
GC_push_one(info.__r5);
GC_push_one(info.__r6);
GC_push_one(info.__r7);
GC_push_one(info.__r8);
GC_push_one(info.__r9);
GC_push_one(info.__r10);
GC_push_one(info.__r11);
GC_push_one(info.__r12);
GC_push_one(info.__r13);
GC_push_one(info.__r14);
GC_push_one(info.__r15);
GC_push_one(info.__r16);
GC_push_one(info.__r17);
GC_push_one(info.__r18);
GC_push_one(info.__r19);
GC_push_one(info.__r20);
GC_push_one(info.__r21);
GC_push_one(info.__r22);
GC_push_one(info.__r23);
GC_push_one(info.__r24);
GC_push_one(info.__r25);
GC_push_one(info.__r26);
GC_push_one(info.__r27);
GC_push_one(info.__r28);
GC_push_one(info.__r29);
GC_push_one(info.__r30);
GC_push_one(info.__r31);
#else
lo = (void*)(info.r1 - PPC_RED_ZONE_SIZE);
hi = (ptr_t)FindTopOfStack(info.r1);
GC_push_one(info.r0);
GC_push_one(info.r2);
GC_push_one(info.r3);
GC_push_one(info.r4);
GC_push_one(info.r5);
GC_push_one(info.r6);
GC_push_one(info.r7);
GC_push_one(info.r8);
GC_push_one(info.r9);
GC_push_one(info.r10);
GC_push_one(info.r11);
GC_push_one(info.r12);
GC_push_one(info.r13);
GC_push_one(info.r14);
GC_push_one(info.r15);
GC_push_one(info.r16);
GC_push_one(info.r17);
GC_push_one(info.r18);
GC_push_one(info.r19);
GC_push_one(info.r20);
GC_push_one(info.r21);
GC_push_one(info.r22);
GC_push_one(info.r23);
GC_push_one(info.r24);
GC_push_one(info.r25);
GC_push_one(info.r26);
GC_push_one(info.r27);
GC_push_one(info.r28);
GC_push_one(info.r29);
GC_push_one(info.r30);
GC_push_one(info.r31);
#endif
# elif defined(I386) /* !POWERPC */
/* FIXME: Remove after testing: */
WARN("This is completely untested and likely will not work\n", 0);
i386_thread_state_t info;
mach_msg_type_number_t outCount = THREAD_STATE_MAX;
r = thread_get_state(thread, GC_MACH_THREAD_STATE_FLAVOR,
(natural_t *)&info, &outCount);
if(r != KERN_SUCCESS) continue;
#if defined (TARGET_IOS) || (MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_5)
lo = (void*)info.__esp;
hi = (ptr_t)FindTopOfStack(info.__esp);
GC_push_one(info.__eax);
GC_push_one(info.__ebx);
GC_push_one(info.__ecx);
GC_push_one(info.__edx);
GC_push_one(info.__edi);
GC_push_one(info.__esi);
GC_push_one(info.__ebp);
/* GC_push_one(info.__esp); */
GC_push_one(info.__ss);
GC_push_one(info.__eip);
GC_push_one(info.__cs);
GC_push_one(info.__ds);
GC_push_one(info.__es);
GC_push_one(info.__fs);
GC_push_one(info.__gs);
#else
lo = (void*)info.esp;
hi = (ptr_t)FindTopOfStack(info.esp);
GC_push_one(info.eax);
GC_push_one(info.ebx);
GC_push_one(info.ecx);
GC_push_one(info.edx);
GC_push_one(info.edi);
GC_push_one(info.esi);
GC_push_one(info.ebp);
/* GC_push_one(info.esp); */
GC_push_one(info.ss);
GC_push_one(info.eip);
GC_push_one(info.cs);
GC_push_one(info.ds);
GC_push_one(info.es);
GC_push_one(info.fs);
GC_push_one(info.gs);
#endif
# elif defined(ARM) /* !I386 */
arm_thread_state_t info;
mach_msg_type_number_t outCount = THREAD_STATE_MAX;
r = thread_get_state(thread, GC_MACH_THREAD_STATE_FLAVOR,
(natural_t *)&info, &outCount);
if(r != KERN_SUCCESS) continue;
lo = (void*)info.__sp;
hi = (ptr_t)FindTopOfStack(info.__sp);
GC_push_one(info.__r[0]);
GC_push_one(info.__r[1]);
GC_push_one(info.__r[2]);
GC_push_one(info.__r[3]);
GC_push_one(info.__r[4]);
GC_push_one(info.__r[5]);
GC_push_one(info.__r[6]);
GC_push_one(info.__r[7]);
GC_push_one(info.__r[8]);
GC_push_one(info.__r[9]);
GC_push_one(info.__r[10]);
GC_push_one(info.__r[11]);
GC_push_one(info.__r[12]);
/* GC_push_one(info.__sp); */
GC_push_one(info.__lr);
GC_push_one(info.__pc);
GC_push_one(info.__cpsr);
# endif /* !ARM */
}
# if DEBUG_THREADS
GC_printf3("Darwin: Stack for thread 0x%lx = [%lx,%lx)\n",
(unsigned long) thread,
(unsigned long) lo,
(unsigned long) hi
);
# endif
GC_push_all_stack(lo, hi);
mach_port_deallocate(my_task, thread);
} /* for(p=GC_threads[i]...) */
vm_deallocate(my_task, (vm_address_t)act_list, sizeof(thread_t) * listcount);
mach_port_deallocate(my_task, me);
}
#endif /* !DARWIN_DONT_PARSE_STACK */
static mach_port_t GC_mach_handler_thread;
static int GC_use_mach_handler_thread = 0;
#define SUSPEND_THREADS_SIZE 2048
static struct GC_mach_thread GC_mach_threads[SUSPEND_THREADS_SIZE];
static int GC_mach_threads_count;
void GC_stop_init() {
int i;
for (i = 0; i < SUSPEND_THREADS_SIZE; i++) {
GC_mach_threads[i].thread = 0;
GC_mach_threads[i].already_suspended = 0;
}
GC_mach_threads_count = 0;
}
/* returns true if there's a thread in act_list that wasn't in old_list */
int GC_suspend_thread_list(thread_act_array_t act_list, int count,
thread_act_array_t old_list, int old_count) {
mach_port_t my_thread = mach_thread_self();
int i, j;
int changed = 0;
for(i = 0; i < count; i++) {
thread_act_t thread = act_list[i];
# if DEBUG_THREADS
GC_printf1("Attempting to suspend thread %p\n", thread);
# endif
/* find the current thread in the old list */
int found = 0;
for(j = 0; j < old_count; j++) {
thread_act_t old_thread = old_list[j];
if (old_thread == thread) {
found = 1;
break;
}
}
if (!found) {
/* add it to the GC_mach_threads list */
GC_mach_threads[GC_mach_threads_count].thread = thread;
/* default is not suspended */
GC_mach_threads[GC_mach_threads_count].already_suspended = 0;
changed = 1;
}
if (thread != my_thread &&
(!GC_use_mach_handler_thread
|| (GC_use_mach_handler_thread
&& GC_mach_handler_thread != thread))) {
struct thread_basic_info info;
mach_msg_type_number_t outCount = THREAD_INFO_MAX;
kern_return_t kern_result = thread_info(thread, THREAD_BASIC_INFO,
(thread_info_t)&info, &outCount);
if(kern_result != KERN_SUCCESS) {
/* the thread may have quit since the thread_threads () call
* we mark already_suspended so it's not dealt with anymore later
*/
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = TRUE;
GC_mach_threads_count++;
}
continue;
}
# if DEBUG_THREADS
GC_printf2("Thread state for 0x%lx = %d\n", thread, info.run_state);
# endif
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = info.suspend_count;
}
if (info.suspend_count) continue;
# if DEBUG_THREADS
GC_printf1("Suspending 0x%lx\n", thread);
# endif
/* Suspend the thread */
kern_result = thread_suspend(thread);
if(kern_result != KERN_SUCCESS) {
/* the thread may have quit since the thread_threads () call
* we mark already_suspended so it's not dealt with anymore later
*/
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = TRUE;
GC_mach_threads_count++;
}
continue;
}
}
if (!found) GC_mach_threads_count++;
}
mach_port_deallocate(current_task(), my_thread);
return changed;
}
/* Caller holds allocation lock. */
void GC_stop_world()
{
int i, changes;
GC_thread p;
task_t my_task = current_task();
mach_port_t my_thread = mach_thread_self();
kern_return_t kern_result;
thread_act_array_t act_list, prev_list;
mach_msg_type_number_t listcount, prevcount;
if (GC_notify_event)
GC_notify_event (GC_EVENT_PRE_STOP_WORLD);
GC_process_togglerefs ();
# if DEBUG_THREADS
GC_printf1("Stopping the world from 0x%lx\n", mach_thread_self());
# endif
/* clear out the mach threads list table */
GC_stop_init();
/* Make sure all free list construction has stopped before we start. */
/* No new construction can start, since free list construction is */
/* required to acquire and release the GC lock before it starts, */
/* and we have the lock. */
# ifdef PARALLEL_MARK
GC_acquire_mark_lock();
GC_ASSERT(GC_fl_builder_count == 0);
/* We should have previously waited for it to become zero. */
# endif /* PARALLEL_MARK */
/* Loop stopping threads until you have gone over the whole list
twice without a new one appearing. thread_create() won't
return (and thus the thread stop) until the new thread
exists, so there is no window whereby you could stop a
thread, recognise it is stopped, but then have a new thread
it created before stopping show up later.
*/
changes = 1;
prev_list = NULL;
prevcount = 0;
do {
int result;
kern_result = task_threads(my_task, &act_list, &listcount);
if(kern_result == KERN_SUCCESS) {
result = GC_suspend_thread_list(act_list, listcount,
prev_list, prevcount);
changes = result;
if(prev_list != NULL) {
for(i = 0; i < prevcount; i++)
mach_port_deallocate(my_task, prev_list[i]);
vm_deallocate(my_task, (vm_address_t)prev_list, sizeof(thread_t) * prevcount);
}
prev_list = act_list;
prevcount = listcount;
}
} while (changes);
for(i = 0; i < listcount; i++)
mach_port_deallocate(my_task, act_list[i]);
vm_deallocate(my_task, (vm_address_t)act_list, sizeof(thread_t) * listcount);
# ifdef MPROTECT_VDB
if(GC_incremental) {
extern void GC_mprotect_stop();
GC_mprotect_stop();
}
# endif
# ifdef PARALLEL_MARK
GC_release_mark_lock();
# endif
#if DEBUG_THREADS
GC_printf1("World stopped from 0x%lx\n", my_thread);
#endif
mach_port_deallocate(my_task, my_thread);
if (GC_notify_event)
GC_notify_event (GC_EVENT_POST_STOP_WORLD);
}
/* Caller holds allocation lock, and has held it continuously since */
/* the world stopped. */
void GC_start_world()
{
task_t my_task = current_task();
mach_port_t my_thread = mach_thread_self();
int i, j;
GC_thread p;
kern_return_t kern_result;
thread_act_array_t act_list;
mach_msg_type_number_t listcount;
struct thread_basic_info info;
mach_msg_type_number_t outCount = THREAD_INFO_MAX;
if (GC_notify_event)
GC_notify_event (GC_EVENT_PRE_START_WORLD);
# if DEBUG_THREADS
GC_printf0("World starting\n");
# endif
# ifdef MPROTECT_VDB
if(GC_incremental) {
extern void GC_mprotect_resume();
GC_mprotect_resume();
}
# endif
kern_result = task_threads(my_task, &act_list, &listcount);
for(i = 0; i < listcount; i++) {
thread_act_t thread = act_list[i];
if (thread != my_thread &&
(!GC_use_mach_handler_thread ||
(GC_use_mach_handler_thread && GC_mach_handler_thread != thread))) {
for(j = 0; j < GC_mach_threads_count; j++) {
if (thread == GC_mach_threads[j].thread) {
if (GC_mach_threads[j].already_suspended) {
# if DEBUG_THREADS
GC_printf1("Not resuming already suspended thread %p\n", thread);
# endif
continue;
}
kern_result = thread_info(thread, THREAD_BASIC_INFO,
(thread_info_t)&info, &outCount);
if(kern_result != KERN_SUCCESS) continue;
# if DEBUG_THREADS
GC_printf2("Thread state for 0x%lx = %d\n", thread,
info.run_state);
GC_printf1("Resuming 0x%lx\n", thread);
# endif
/* Resume the thread */
kern_result = thread_resume(thread);
if(kern_result != KERN_SUCCESS) continue;
}
}
}
mach_port_deallocate(my_task, thread);
}
vm_deallocate(my_task, (vm_address_t)act_list, sizeof(thread_t) * listcount);
mach_port_deallocate(my_task, my_thread);
if (GC_notify_event)
GC_notify_event (GC_EVENT_POST_START_WORLD);
# if DEBUG_THREADS
GC_printf0("World started\n");
# endif
}
void GC_darwin_register_mach_handler_thread(mach_port_t thread) {
GC_mach_handler_thread = thread;
GC_use_mach_handler_thread = 1;
}
#endif
+1185
View File
File diff suppressed because it is too large. Load diff
Loaded 100 of 1131 files, more files were not shown because too many files have changed in this diff. Show more