mirror of
https://github.com/FEX-Emu/linux.git
synced 2025-02-11 06:16:10 +00:00
581859 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
aaf2559332 |
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
When cgroup writeback is in use, there can be multiple wb's (bdi_writeback's) per bdi and an inode may switch among them dynamically. In a couple places, the wrong wb was used leading to performing operations on the wrong list under the wrong lock corrupting the io lists. * writeback_single_inode() was taking @wb parameter and used it to remove the inode from io lists if it becomes clean after writeback. The callers of this function were always passing in the root wb regardless of the actual wb that the inode was associated with, which could also change while writeback is in progress. Fix it by dropping the @wb parameter and using inode_to_wb_and_lock_list() to determine and lock the associated wb. * After writeback_sb_inodes() writes out an inode, it re-locks @wb and inode to remove it from or move it to the right io list. It assumes that the inode is still associated with @wb; however, the inode may have switched to another wb while writeback was in progress. Fix it by using inode_to_wb_and_lock_list() to determine and lock the associated wb after writeback is complete. As the function requires the original @wb->list_lock locked for the next iteration, in the unlikely case where the inode has changed association, switch the locks. Kudos to Tahsin for pinpointing these subtle breakages. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: d10c80955265 ("writeback: implement foreign cgroup inode bdi_writeback switching") Link: http://lkml.kernel.org/g/CAAeU0aMYeM_39Y2+PaRvyB1nqAPYZSNngJ1eBRmrxn7gKAt2Mg@mail.gmail.com Reported-and-diagnosed-by: Tahsin Erdogan <tahsin@google.com> Tested-by: Tahsin Erdogan <tahsin@google.com> Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
614a4e3773 |
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
locked_inode_to_wb_and_lock_list() wb_get()'s the wb associated with the target inode, unlocks inode, locks the wb's list_lock and verifies that the inode is still associated with the wb. To prevent the wb going away between dropping inode lock and acquiring list_lock, the wb is pinned while inode lock is held. The wb reference is put right after acquiring list_lock citing that the wb won't be dereferenced anymore. This isn't true. If the inode is still associated with the wb, the inode has reference and it's safe to return the wb; however, if inode has been switched, the wb still needs to be unlocked which is a dereference and can lead to use-after-free if it it races with wb destruction. Fix it by putting the reference after releasing list_lock. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 87e1d789bf55 ("writeback: implement [locked_]inode_to_wb_and_lock_list()") Cc: stable@vger.kernel.org # v4.2+ Tested-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
897bb0c7f1 |
blk-mq: Use proper cpumask iterator
queue_for_each_ctx() iterates over per_cpu variables under the assumption that the possible cpu mask cannot have holes. That's wrong as all cpumasks can have holes. In case there are holes the iteration ends up accessing uninitialized memory and crashing as a result. Replace the macro by a proper for_each_possible_cpu() loop and drop the unused macro blk_ctx_sum() which references queue_for_each_ctx(). Reported-by: Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
5173cb814b |
mtip32xx: fix checks for dma mapping errors
exec_drive_taskfile() checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
29fd20b8e6 |
lightnvm: do not load L2P table if not supported
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the L2P table is maintained both by the host and by the device; and (ii) full host-based, where the L2P table is uniquely maintained by the host. In the advent of a new target implementing the full host-based mode, do not assume that the L2P table must be loaded on the generic media manager; check device properties loaded on the identify command instead. Signed-off-by: Javier González <javier@cnexlabs.com> Moved into the following statement. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
719b59172c |
lightnvm: do not reserve lun on l2p loading
When the l2p table is loaded, addresses are checked for the lun they belong to and luns are reserved accordingly. This assumes that metadata is being stored in the backend device to recover the previous target configuration. Since this is not yet implemented, this check collides with some of the core initialization (e.g., sysblock initialization when a page is formed by several sectors). We take this check out and for now rely on that the right target will be created instead. When metadata is stored to recover a target, this check will come natural as part of the recovery strategy. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
9f86726843 |
nvme: lightnvm: return ppa completion status
PPAs sent to device is separately acknowledge in a 64bit status variable. The status is stored in DW0 and DW1 of the completion queue entry. Store this status inside the nvm_rq for further processing. This can later be used to implement retry techniques for failed writes and reads. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
da1e284919 |
lightnvm: add a bitmap of luns
Add a bitmap of luns to indicate the status of luns: inuse/available. When create targets do the necessary check to avoid allocating luns that are already allocated. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Freed dev->lun_map if nvm_core_init later failed in the init process. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
4c9dacb82d |
lightnvm: specify target's logical address area
We can create more than one target on a lightnvm device by specifying its begin lun and end lun. But only specify the physical address area is not enough, we need to get the corresponding non- intersection logical address area division from the backend device's logcial address space. Otherwise the targets on the device might use the same logical addresses cause incorrect information in the device's l2p table. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
3681c85dff |
null_blk: add lightnvm null_blk device to the nullb_list
After register null_blk devices into lightnvm, we forget to add these devices to the the nullb_list, makes them invisible to the null_blk driver. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Fixes: a514379b0c77 ("null_blk: oops when initializing without lightnvm") Signed-off-by: Jens Axboe <axboe@fb.com> |
||
![]() |
237045fc3c |
Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe: "This is the block driver pull request for this merge window. It sits on top of for-4.6/core, that was just sent out. This contains: - A set of fixes for lightnvm. One from Alan, fixing an overflow, and the rest from the usual suspects, Javier and Matias. - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd for correct usage of the signed 64-bit divider. - A set of bug fixes for the Micron mtip32xx, from Asai. - A fix for the brd discard handling from Bart. - Update the maintainers entry for cciss, since that hardware has transferred ownership. - Three bug fixes for bcache from Eric Wheeler. - Set of fixes for xen-blk{back,front} from Jan and Konrad. - Removal of the cpqarray driver. It has been disabled in Kconfig since 2013, and we were initially scheduled to remove it in 3.15. - Various updates and fixes for NVMe, with the most important being: - Removal of the per-device NVMe thread, replacing that with a watchdog timer instead. From Christoph. - Exposing the namespace WWID through sysfs, from Keith. - Set of cleanups from Ming Lin. - Logging the controller device name instead of the underlying PCI device name, from Sagi. - And a bunch of fixes and optimizations from the usual suspects in this area" * 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits) NVMe: Expose ns wwid through single sysfs entry drivers:block: cpqarray clean up brd: Fix discard request processing cpqarray: remove it from the kernel cciss: update MAINTAINERS NVMe: Remove unused sq_head read in completion path bcache: fix cache_set_flush() NULL pointer dereference on OOM bcache: cleaned up error handling around register_cache() bcache: fix race of writeback thread starting before complete initialization NVMe: Create discard zero quirk white list nbd: use correct div_s64 helper mtip32xx: remove unneeded variable in mtip_cmd_timeout() lightnvm: generalize rrpc ppa calculations lightnvm: remove struct nvm_dev->total_blocks lightnvm: rename ->nr_pages to ->nr_sects lightnvm: update closed list outside of intr context xen/blback: Fit the important information of the thread in 17 characters lightnvm: fold get bb tbl when using dual/quad plane mode lightnvm: fix up nonsensical configure overrun checking xen-blkback: advertise indirect segment support earlier ... |
||
![]() |
35d88d97be |
Merge branch 'for-4.6/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe: "Here are the core block changes for this merge window. Not a lot of exciting stuff going on in this round, most of the changes have been on the driver side of things. That pull request is coming next. This pull request contains: - A set of fixes for chained bio handling from Christoph. - A tag bounds check for blk-mq from Hannes, ensuring that we don't do something stupid if a device reports an invalid tag value. - A set of fixes/updates for the CFQ IO scheduler from Jan Kara. - A set of blk-mq fixes from Keith, adding support for dynamic hardware queues, and fixing init of max_dev_sectors for stacking devices. - A fix for the dynamic hw context from Ming. - Enabling of cgroup writeback support on a block device, from Shaohua" * 'for-4.6/core' of git://git.kernel.dk/linux-block: blk-mq: add bounds check on tag-to-rq conversion block: bio_remaining_done() isn't unlikely block: cleanup bio_endio block: factor out chained bio completion block: don't unecessarily clobber bi_error for chained bios block-dev: enable writeback cgroup support blk-mq: Fix NULL pointer updating nr_requests blk-mq: mark request queue as mq asap block: Initialize max_dev_sectors to 0 blk-mq: dynamic h/w context count cfq-iosched: Allow parent cgroup to preempt its child cfq-iosched: Allow sync noidle workloads to preempt each other cfq-iosched: Reorder checks in cfq_should_preempt() cfq-iosched: Don't group_idle if cfqq has big thinktime |
||
![]() |
040e3abbb9 |
USB fixes for 4.6-rc1
Here is a USB fix for the reported issue with 69bec7259853 "USB: core: let USB device know device node" as well as some other issues that have been reported so far with this merge. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbsjB8ACgkQMUfUDdst+yn5BACeK0uVt+S/pr+HQE30j67b4UV6 TcMAn25xKshM73AFDm9ok9qKnWEEvkEt =UgYu -----END PGP SIGNATURE----- Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a USB fix for the reported issue with commit 69bec7259853 ("USB: core: let USB device know device node") as well as some other issues that have been reported so far with this merge window" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: uas: Reduce can_queue to MAX_CMNDS USB: cdc-acm: more sanity checking USB: usb_driver_claim_interface: add sanity checking usb/core: usb_alloc_dev(): fix setting of ->portnum USB: iowarrior: fix oops with malicious USB descriptors |
||
![]() |
f7813ad5cb |
Just some minor fixes, nothing big.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlbr9dEACgkQIXnXXONXEReOVACeMD7TWGwKHLYhzDX2jPoDjKw+ oWAAoJKVbxG8jU6H6SPdIL1/8rpDfQw2 =MY/X -----END PGP SIGNATURE----- Merge tag 'for-linus-4.6' of git://git.code.sf.net/p/openipmi/linux-ipmi Pull IPMI updates from Corey Minyard: "Just some minor fixes, nothing big" * tag 'for-linus-4.6' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: do not probe ACPI devices if si_tryacpi is unset ipmi_si: Avoid a wrong long timeout on transaction done ipmi_si: Fix module parameter doc names ipmi_ssif: Fix logic around alert handling |
||
![]() |
12e7b0a627 |
- New Drivers
- Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) - New Device Support - Supply device PCI IDs for Intel Broxton - Fix-ups - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu - Bug Fixes - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6+LJAAoJEFGvii+H/Hdh8kQP/2AKYzPZiw9fhLufsDPvXO5m BVdLYVyA11oQjQk7/Bh+5Rjz8mR5Tfv4uAJUReC3FOIfC/oJNBfBxYJLDV/P8S0/ KaCEaZrpNmecKrsy+TjmFYtcRa51THAdjlWEUKRks/ZBjwP4YsNnh5reWe+wB7bS NFbCNhpXFvYXaDGH8MRhKqdChzZkxi+lgOBcFCKvUYO5/o6g/ZRUD/0TXUItJDwh F8ps5jImHC1imHeRIKWPNrrZqcYasKmObIhvOKMDcwNQPnjrAWq5QuFH4LFhGQ7d 7NMQrBpaGvZyUNBVtL7ZF1xCJ68wAg/ZvZUkKVkax9ubLbSgf6VXYLQEbq+lyFn7 H9A79xPAGN2nC9HsGnCqW0c0qgTOz0DIkbpuaxAGlzBt0zooc19i3cuUd7LX0NG8 ttLaIP1hX6rgvXSFnF0Ihe3iN5A90LTT3ldbn3A8awyS42vEAbUVL9ivRL21BUbB ilSTO2W05a9HlIVe43o2euytaGvDYX7RbL/g3WcJLF1pA01RCIDQAI5usMpgF3bf fJ7cszll0OVTTb5UzbfrNsxAn4oNtbwMIspMMFe17pbmxqh+4oomM3CkuTrMVQfB pA7Uv0jh/mLCV6P52ZEsNiecn0/l0rID8d/DCHjunr2xBWIOrglzZ7n+vLTJMNJ6 72GVBkYRMLbRm+eph1Tp =gTBA -----END PGP SIGNATURE----- Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ... |
||
![]() |
021f163d69 |
sound updates for 4.6-rc1
After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJW69UAAAoJEGwxgFQ9KSmkoaAQAJ6uBco1gqTmYkJGyLMRRblT BxEQ0NMSlPrNEJpR6GOYknrdPZiA4WfxT1zhswDQoNvSKery3bn3aOGfWHA9I+9j TRUwHkOAlRCcwgTfy70pRS0fcAx34y9nTcAWsVn9RbrMP3ydkwKyMXRqTwqYr5u5 UU53PSdwhUO8q/PomvBeip8nvw7zrV+06nVbEMUnIQlgp165n/qq0sRFBVkRBBJ7 ooqe6VW6F2Es3Zh+W9Vp/qn9OpZEdDCKvmICX1RIFJUgYRRxbL+L021TGjkaXVmT Or9L9StRYePZsCo1I1vsYUbYc6+Y3qDmqViGhREHBZ27EY8G1Utk7wy959vt0eFj 1xHynw36kmjrw/QlPraJBRuYIQh4SRAcXhw+wQdM5rxdp7gDjikhkezHZQWrvQAJ 5XXitZhVVNa9DRS5ZRwnW5nT/emQ+KBuJyl9gyAL1HaoZoYnDvRkfe9CGpgj7TRP wYcnL+rKL9x8eiJY5VTfL9rIxTgNYXvuPPBgdmJEp8qu5de8O1g5UN0xHSGf3yhr DVE5r/2J+gYNprsSF9DV6pfFQuh/Efw9XW2IbK6k6WF4labWGeD7rLrI4t9aJcXv PJ1FY/sUFhHZhZjHlGbR9emK+BLtZweFvOAvY7dD74ON65D5tYXvHPo0QTc4V5Op d0eDg0pcTdFLDqq8ZLLr =Cc+v -----END PGP SIGNATURE----- Merge tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ... |
||
![]() |
9ea4463520 |
Initial roundup of 4.6 merge window patches
- cxgb4 updates - nes updates - unification of iwarp portmapper code to core - add drain_cq API - various ib_core updates - minor ipoib updates - minor mlx4 updates - more significant mlx5 updates (including a minor merge conflict with net-next tree...merge is simple to resolve and Stephen's resolution was confirmed by Mellanox) - trivial net/9p rdma conversion - ocrdma RoCEv2 update - srpt updates -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6aTEAAoJELgmozMOVy/dlAEQAKgT0VwBi6Zd4PihP2UQgsfH LUmbGhCzBpcao1eJ7piOOEYQGSb3slN3Cnup4qBJak+y2mhtErxNkLOIhGRrvcHk XCym7N9uAhp4j++OnUBp6Cpr0hZNmBEBKm6nKqdEcdaxLaVa0ezdcxAOkVlHhZ77 NnhTHvPy8pu4kC8NZCvCIJK+fqW+5Xj+ojAcVKGPV+Y3zf9lfaDCXCSdD2m6+dFX /KV3V/CNUSdYTWrPZSIDhqoYix2AGl5Fg17mfsgBWQB/T405fiwZkd0FEXkqXDkR bOhS5PnuCN+ScwsxMDHCbzqtaOb06sKttg9IE3s0qdFpOwGtbyoU+lLUh1qbjKLP vtEiySZq2Mhlr41ajuUuDSgNbqCTL7+52/HUf8qcjFFiSBlZRaTO8rVJ5tABKRiW SkxkHbR6orx8okKtaWRskKRtYSNkA2uexdIQ/wzc4fJVqzqJUh6Elcxp3dPq/KSN lkrYXNJ5X4ux72QfHRobBX1pBjT0P2+avoFri3763k9ZrsWwY9tXgDUB/OdX11IF gAadgUNw2pHgY10jqCZBOw22F+foB2qx8ZkaNSGYE0h3uQrp+iiCnfeU9rWNCWVv MelRGpfGa7VF3RTDojc7Dq7JpWRUChMx9BY+XrQPmV08Z+JGoVuRT20Q7twgillz Yb3aGRKZNtqYehj9fM4n =kTkT -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.6 merge window patches. This is the first of two pull requests. It is the smaller request, but touches for more different things (this is everything but what is in or going into staging). The pull request for the code in staging/rdma is on hold until after we decide what to do on the write/writev API issue and may be partially deferred until 4.7 as a result. Summary: - cxgb4 updates - nes updates - unification of iwarp portmapper code to core - add drain_cq API - various ib_core updates - minor ipoib updates - minor mlx4 updates - more significant mlx5 updates (including a minor merge conflict with net-next tree...merge is simple to resolve and Stephen's resolution was confirmed by Mellanox) - trivial net/9p rdma conversion - ocrdma RoCEv2 update - srpt updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (85 commits) iwpm: crash fix for large connections test iw_cxgb3: support for iWARP port mapping iw_cxgb4: remove port mapper related code iw_nes: remove port mapper related code iwcm: common code for port mapper net/9p: convert to new CQ API IB/mlx5: Add support for don't trap rules net/mlx5_core: Introduce forward to next priority action net/mlx5_core: Create anchor of last flow table iser: Accept arbitrary sg lists mapping if the device supports it mlx5: Add arbitrary sg list support IB/core: Add arbitrary sg_list support IB/mlx5: Expose correct max_fast_reg_page_list_len IB/mlx5: Make coding style more consistent IB/mlx5: Convert UMR CQ to new CQ API IB/ocrdma: Skip using unneeded intermediate variable IB/ocrdma: Skip using unneeded intermediate variable IB/ocrdma: Delete unnecessary variable initialisations in 11 functions IB/core: Documentation fix in the MAD header file IB/core: trivial prink cleanup. ... |
||
![]() |
55ff8cfbc4 |
USB: uas: Reduce can_queue to MAX_CMNDS
The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags are shared between luns, so there is no need to claim that we can_queue some random large number. Not claiming that we can_queue 65536 commands, fixes the uas driver failing to initialize while allocating the tag map with a "Page allocation failure (order 7)" error on systems which have been running for a while and thus have fragmented memory. Cc: stable@vger.kernel.org Reported-and-tested-by: Yves-Alexis Perez <corsac@corsac.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
8835ba4a39 |
USB: cdc-acm: more sanity checking
An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
0b818e3956 |
USB: usb_driver_claim_interface: add sanity checking
Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
7222c83225 |
usb/core: usb_alloc_dev(): fix setting of ->portnum
With commit 69bec7259853 ("USB: core: let USB device know device node"), the port1 argument of usb_alloc_dev() gets overwritten as follows: ... usb_alloc_dev(..., unsigned port1) { ... if (!parent->parent) { port1 = usb_hcd_find_raw_port_number(..., port1); } ... } Later on, this now overwritten port1 gets assigned to ->portnum: dev->portnum = port1; However, since xhci_find_raw_port_number() isn't idempotent, the aforementioned commit causes a number of KASAN splats like the following: BUG: KASAN: slab-out-of-bounds in xhci_find_raw_port_number+0x98/0x170 at addr ffff8801d9311670 Read of size 8 by task kworker/2:1/87 [...] Workqueue: usb_hub_wq hub_event 0000000000000188 000000005814b877 ffff8800cba17588 ffffffff8191447e 0000000041b58ab3 ffffffff82a03209 ffffffff819143a2 ffffffff82a252f4 ffff8801d93115e0 0000000000000188 ffff8801d9311628 ffff8800cba17588 Call Trace: [<ffffffff8191447e>] dump_stack+0xdc/0x15e [<ffffffff819143a2>] ? _atomic_dec_and_lock+0xa2/0xa2 [<ffffffff814e2cd1>] ? print_section+0x61/0xb0 [<ffffffff814e4939>] print_trailer+0x179/0x2c0 [<ffffffff814f0d84>] object_err+0x34/0x40 [<ffffffff814f4388>] kasan_report_error+0x2f8/0x8b0 [<ffffffff814eb91e>] ? __slab_alloc+0x5e/0x90 [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 [<ffffffff814f5091>] kasan_report+0x71/0xa0 [<ffffffff814ec082>] ? kmem_cache_alloc_trace+0x212/0x560 [<ffffffff81d99468>] ? xhci_find_raw_port_number+0x98/0x170 [<ffffffff814f33d4>] __asan_load8+0x64/0x70 [<ffffffff81d99468>] xhci_find_raw_port_number+0x98/0x170 [<ffffffff81db0105>] xhci_setup_addressable_virt_dev+0x235/0xa10 [<ffffffff81d9ea51>] xhci_setup_device+0x3c1/0x1430 [<ffffffff8121cddd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81d9fac0>] ? xhci_setup_device+0x1430/0x1430 [<ffffffff81d9fad3>] xhci_address_device+0x13/0x20 [<ffffffff81d2081a>] hub_port_init+0x55a/0x1550 [<ffffffff81d28705>] hub_event+0xef5/0x24d0 [<ffffffff81d27810>] ? hub_port_debounce+0x2f0/0x2f0 [<ffffffff8195e1ee>] ? debug_object_deactivate+0x1be/0x270 [<ffffffff81210203>] ? print_rt_rq+0x53/0x2d0 [<ffffffff8121657d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8226acfb>] ? _raw_spin_unlock_irqrestore+0x5b/0x60 [<ffffffff81250000>] ? irq_domain_set_hwirq_and_chip+0x30/0xb0 [<ffffffff81256339>] ? debug_lockdep_rcu_enabled+0x39/0x40 [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 [<ffffffff81196877>] process_one_work+0x567/0xec0 [...] Afterwards, xhci reports some functional errors: xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion code 0x11. xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion code 0x11. usb 4-3: device not accepting address 2, error -22 Fix this by not overwriting the port1 argument in usb_alloc_dev(), but storing the raw port number as required by OF in an additional variable, raw_port. Fixes: 69bec7259853 ("USB: core: let USB device know device node") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
4ec0ef3a82 |
USB: iowarrior: fix oops with malicious USB descriptors
The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
9f0257b39c |
ipmi: do not probe ACPI devices if si_tryacpi is unset
Extend the tryacpi module parameter to turn off acpi_ipmi_probe such that hard-coded options (type, ports, address, etc.) have complete control over the smi_info data structures setup by the driver. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
![]() |
d9dffd2a0b |
ipmi_si: Avoid a wrong long timeout on transaction done
Under some circumstances, the IPMI state machine could return a call without delay option but the driver would still do a long delay because the result wasn't checked. Instead of calling the state machine after transaction done, just go back to the top of the processing to start over. Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
![]() |
f813655a36 |
ipmi_si: Fix module parameter doc names
Several were tryacpi instead of their actual values. Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
![]() |
21c8f9154d |
ipmi_ssif: Fix logic around alert handling
There was a mistake in the logic, if an alert came in very quickly it would hang the driver. Signed-off-by: Corey Minyard <cminyard@mvista.com> |
||
![]() |
9dffdb38d8 |
Staging driver patches for 4.6-rc1
Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notible is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbrc3EACgkQMUfUDdst+ylu5ACgpdTKjrZn2vHElW3GRhTpzJdQ wz8AoJDeur2DmBkQrKD5/u/WL4UTRNZJ =+Q6N -----END PGP SIGNATURE----- Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ... |
||
![]() |
10fdfee7f7 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "The most notable item is addition of support for Synaptics RMI4 protocol which is native protocol for all current Synaptics devices (touchscreens, touchpads). In later releases we'll switch devices using HID and PS/2 protocol emulation to RMI4. You will also get: - BYD PS/2 touchpad protocol support for psmouse - MELFAS MIP4 Touchscreen driver - rotary encoder was moved away from legacy platform data and to generic device properties API, devm_* API, and can now handle encoders using more than 2 GPIOs - Cypress touchpad driver was switched to devm_* API and device properties - other assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props Input: synaptics-rmi4 - using logical instead of bitwise AND Input: powermate - fix oops with malicious USB descriptors Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle() MAINTAINERS: add devicetree bindings to Input Drivers section Input: synaptics-rmi4 - add device tree support to the SPI transport driver Input: synaptics-rmi4 - add SPI transport driver Input: synaptics-rmi4 - add support for F30 Input: synaptics-rmi4 - add support for F12 Input: synaptics-rmi4 - add device tree support for 2d sensors and F11 Input: synaptics-rmi4 - add support for 2D sensors and F11 Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices Input: synaptics-rmi4 - add I2C transport driver Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Input: ad7879 - add device tree support Input: ad7879 - fix default x/y axis assignment Input: ad7879 - move header to platform_data directory Input: ts4800 - add hardware dependency Input: cyapa - fix for losing events during device power transitions Input: sh_keysc - remove dependency on SUPERH ... |
||
![]() |
0f49fc95b8 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching update from Jiri Kosina: - cleanup of module notifiers; this depends on a module.c cleanup which has been acked by Rusty; from Jessica Yu - small assorted fixes and MAINTAINERS update * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch/module: remove livepatch module notifier modules: split part of complete_formation() into prepare_coming_module() livepatch: Update maintainers livepatch: Fix the error message about unresolvable ambiguity klp: remove CONFIG_LIVEPATCH dependency from klp headers klp: remove superfluous errors in asm/livepatch.h |
||
![]() |
49dc2b7173 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: drivers/rtc: broken link fix drm/i915 Fix typos in i915_gem_fence.c Docs: fix missing word in REPORTING-BUGS lib+mm: fix few spelling mistakes MAINTAINERS: add git URL for APM driver treewide: Fix typo in printk |
||
![]() |
d66435cc7d |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina: - functionally equivalent cleanups for wacom driver, making the code more readable, from Benjamin Tissoires - a bunch of improvements and fixes for thingm driver from Heiner Kallweit - bugfixes to out-of-bound access for generic parsing functions (which have been there since ever) extract() and implement(), from Dmitry Torokhov - a lot of added / improved device support in sony, wacom, microsoft, multitouch and logitech driver, from various people * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (44 commits) HID: microsoft: Add ID for MS Wireless Comfort Keyboard hid: thingm: reorder calls in thingm_probe HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report() HID: multitouch: Release all touch slots on reset_resume HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2 HID: penmount: report only one button for PenMount 6000 USB touchscreen controller HID: i2c-hid: Fix suspend/resume when already runtime suspended HID: i2c-hid: Add hid-over-i2c name to i2c id table HID: multitouch: force retrieving of Win8 signature blob HID: Support for CMedia CM6533 HID audio jack controls HID: thingm: improve locking HID: thingm: switch to managed version of led_classdev_register HID: thingm: remove workqueue HID: corsair: fix mapping of non-keyboard usages HID: wacom: close the wireless receiver on remove() HID: wacom: cleanup input devices HID: wacom: reuse wacom_parse_and_register() in wireless_work HID: wacom: move down wireless_work() HID: wacom: break out parsing of device and registering of input HID: wacom: break out wacom_intuos_get_tool_type ... |
||
![]() |
1a46712aa9 |
This is the bulk of GPIO changes for kernel v4.6:
Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6m24AAoJEEEQszewGV1zUasP/RpTrjRcNI5QFHjudd2oioDx R/IljC06Q072ZqVy/MR7QxwhoU8jUnCgKgv4rgMa1OcfHblxC2R1+YBKOUSij831 E+SYmYDYmoMhN7j5Aslr66MXg1rLdFSdCZWemuyNruAK8bx6cTE1AWS8AELQzzTn Re/CPpCDbujLy0ZK2wJHgr9ZkdcBGICtDRCrOR3Kyjpwk/DSZcruK1PDN+VQMI3k bJlwgtGenOHINgCq/16edpwj/hzmoJXhTOZXJHI5XVR6czTwb3SvCYACvCkauI/a /N7b3quG88b5y0OPQPVxp5+VVl9GyVcv5oGzIfTNat/g5QinShZIT4kVV9r0xu6/ TQHh1HlXleh+QI3yX0oRv9ztHreMf+vdpw1dhIwLqHqfJ7AWdOGk7BbKjwCrsOoq t/qUVFnyvooLpyr53Z5JY8+LqyynHF68G+jUQyHLgTZ0GCE+z+1jqNl1T501n3kv 3CSlNYxSN/YUBN3cnroAIU/ZWcV4YRdxmOtEWP+7xgcdzTE6s/JHb2fuEfVHzWPf mHWtJGy8U0IR4VSSEln5RtjhRr0PAjTHeTOGAmivUnaIGDziTowyUVF+X5hwC77E DGTuLVx/Kniv173DK7xNAsUZNAETBa3fQZTgu+RfOpMiM1FZc7tI1rd7K7PjbyCc d2M0gcq+d11ITJTxC7OM =9AJ4 -----END PGP SIGNATURE----- Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ... |
||
![]() |
82b666eee7 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer: "The main change is the removal of the bit-rotten 68360 support. Also a fix to always make the ethernet FEC platform info available" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove obsolete 68360 support m68knommu: fix FEC platform device registration when driver is modular |
||
![]() |
588ab3f9af |
arm64 updates for 4.6:
- Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6u95AAoJEGvWsS0AyF7xMyoP/3x2O6bgreSQ84BdO4JChN4+ RQ9OVdX8u2ItO9sgaCY2AA6KoiBuEjGmPl/XRuK0I7DpODTtRjEXQHuNNhz8AelC hn4AEVqamY6Z5BzHFIjs8G9ydEbq+OXcKWEdwSsBhP/cMvI7ss3dps1f5iNPT5Vv 50E/kUz+aWYy7pKlB18VDV7TUOA3SuYuGknWV8+bOY5uPb8hNT3Y3fHOg/EuNNN3 DIuYH1V7XQkXtF+oNVIGxzzJCXULBE7egMcWAm1ydSOHK0JwkZAiL7OhI7ceVD0x YlDxBnqmi4cgzfBzTxITAhn3OParwN6udQprdF1WGtFF6fuY2eRDSH/L/iZoE4DY OulL951OsBtF8YC3+RKLk908/0bA2Uw8ftjCOFJTYbSnZBj1gWK41VkCYMEXiHQk EaN8+2Iw206iYIoyvdjGCLw7Y0oakDoVD9vmv12SOaHeQljTkjoN8oIlfjjKTeP7 3AXj5v9BDMDVh40nkVayysRNvqe48Kwt9Wn0rhVTLxwdJEiFG/OIU6HLuTkretdN dcCNFSQrRieSFHpBK9G0vKIpIss1ZwLm8gjocVXH7VK4Mo/TNQe4p2/wAF29mq4r xu1UiXmtU3uWxiqZnt72LOYFCarQ0sFA5+pMEvF5W+NrVB0wGpXhcwm+pGsIi4IM LepccTgykiUBqW5TRzPz =/oS+ -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ... |
||
![]() |
3d15cfdb1b |
linux-kselftest-4.6-rc1
This update for Kselftest adds: - A new feature to create test-specific kconfig fragments. This feature helps configure Kselftests to test specific Kernel Configuration options as opposed to defconfig. - A new test for Media Controller API - A few fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6XcVAAoJEAsCRMQNDUMcsZUP/RsqY+St7iNhfqMF5pzyJU5r 8YJqT7T9tcalKjJyGVOLVopvQe0X0/d3515ATWbUquLZ2Kx9zQzEyUWvJ/kZVrDA 9466KeCma+cX405fKqBDEqvD03eFA3WEGJ239bLC3pFH9Mq5FN6pIfGWprFpoVOc tiQYwnLINSs0/Lk508l5+ym1WclOEEKDjR56PmIyFKLDve45Tc8f3aflgLKmj+jT tqOq0qZkQgZljJStzWIK3nXogSO9LYCoTnjsJmM11pmjp/9DkSW/EEAzNEi5x35Q yYNLa3Dby8GDBh+xT2HUoKBxsZzSS9u450z8nDWTZeA9GEPJLxq+fIcWx5dfkhNn VcVYgTzpgq0yrMjf4Z6PWHPC1v8GGL+1+hOqHc44mNZut/GjtD2ecIF9fo3Jsiwn 8Y26KIwh32z7m7mCW+onulR7iGib85bbleXqVSRItoy2uIHdsiUo9z08H1XkDutP EW/DGP40ayLNJwL1CpcWr6+zgmdgi5G0M9QEcj4kj98Bel1aVwsyp0eV/w3Nqr98 Fqc/ZTuXNj84M7IxVQcAEomcKo4lRkM4WELHeM9yN57FBj5gRF+V5MXzqroFUcfZ 0nCmrVkX7PVeSq5uxOJiTTf+HCfyXj7YQUUA76rfxN+MjQMfhyCssIxF+dvYnY3W bY3IHcboo39LCRCvnzht =Sk1k -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "This update for Kselftest adds: - A new feature to create test-specific kconfig fragments. This feature helps configure Kselftests to test specific Kernel Configuration options as opposed to defconfig. - A new test for Media Controller API - A few fixes" * tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: media_dcevice_test fix usage information selftests: media_dcevice_test fix to handle ioctl failure case selftests: add missing .gitignore file or entry Makefile: add kselftest-merge selftests: create test-specific kconfig fragments selftests: breakpoint: add step_after_suspend_test selftests: add a new test for Media Controller API |
||
![]() |
5cd0911a9e |
Allow ram backend to be configured with addresses above 4GB
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6yKvAAoJEKurIx+X31iBgkkQAJ0GM0zDD3jQx3G95k/KiRZW H70+sZZDnfYGXv22Vv5/u5eGlRGMkmZ6xBX6cwDOsNaUIh3YspjKmrHvcO8mNAcE MpEyMc6aKPmPCQPvNQxSegYEHzLZdN/OIbPYWxihnQ613iSNoYy/Gdgk3bqxWHDU 2p5gvAq5lalTTBz5/nViC65op7qeziIKzzCvUrn1rkycZ7fkPhDaqeKqW6gAQO88 Do4h9rItDL6NDEQR9S2ihbEWRKGZSTYuN0SqFvIYRuly8/aYVy2DCpDbh3aN63zp lIfLhvLPLFTWzFmTbkltD5ZG5qYYRlWZy2vsXKrc1ya+qKiQHn/BTe/9/65pCzP0 IeV9h6JMP7cfAGD+vAKD9PeHaePqL9RYg5F9lbos68IvxkVFF8osaLbMCghomtMJ dtj3ORDh6KSFUOtCsudlc/S9xz3OLL9hmi4QTvF+qDEUEpHY9aY4SqqPcXm/8/Xy babWOBu23V3WCOlLEs9gRsKbZM3gSGT1jlgvSYBmDLJY43bpkcmN7E6WdX8jjPRK vXGfzYp6ZdCJNlBpytLDri34yGDcyKqc3J7c6Wj/D55v4PsQo3mWnPUNTeaeHf3q 4SD6JFvXHSttrquA0G2fkJQ0ksvaWD3kJBRwzzlfqYZ0SbtUc0hjFH6/OOGQD9fg cJ2KH9bgpafvyG2yqF7w =vPCf -----END PGP SIGNATURE----- Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore update from Tony Luck: "Allow ram backend to be configured with addresses above 4GB" * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: Add support for 64 Bit address space |
||
![]() |
1ca80a0a3e |
GFS2: merge window
We only have six patches ready for this merge window. - Arnd Bergmann contributed a patch that fixes an uninitialized variable warning. - The second patch avoids a kernel panic due to referencing an iopen glock that may not be held, in an error path. - The third patch fixes a rounding error that caused xfs_tests direct IO write "fsx" tests to fail on GFS2. - The fourth patch tidies up the code path when glocks are being reused to recreate a dinode that was recently deleted. - The fifth reverts an ages-old patch that should no longer be needed, and which interfered with the transition of dinodes from unlinked to free. - And lastly, a patch to eliminate a function parameter that's not needed. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJW6qcKAAoJENeLYdPf93o70SwH/0czrFBIWaPbRgyuGLNvye4G qvfIk2Yky3UKfgUA+ZW+cAWkxeKubc9scMwce0elKxm0e03rNwIX0slIOx8hymj3 19AgMnj3kcCJvRLdkBITNqnd6vTY2quadLN3j8I2cCNbHOV0GelEkP4jWcTHB+2F AG0ZJOsvvrcD1ClgdIvGdV52qipZApS/kgZjLpJBEyzxq8SpRe9vNqMDsDyoKWgi yjp0+aJ0IJAWA24fzdT5HE4fb5yGRWehg51l6Z2mbfXAvT+oeKcYrQiq1zhUutHw dT6SUHbjt+y0EulPClsf3r5zjRjVCCbpj0wkUY3kPB98lgnpAD2QnUP/JDA+CD0= =xRmX -----END PGP SIGNATURE----- Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We only have six patches ready for this merge window: - Arnd Bergmann contributed a patch that fixes an uninitialized variable warning. - The second patch avoids a kernel panic due to referencing an iopen glock that may not be held, in an error path. - The third patch fixes a rounding error that caused xfs_tests direct IO write "fsx" tests to fail on GFS2. - The fourth patch tidies up the code path when glocks are being reused to recreate a dinode that was recently deleted. - The fifth reverts an ages-old patch that should no longer be needed, and which interfered with the transition of dinodes from unlinked to free. - And lastly, a patch to eliminate a function parameter that's not needed" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Eliminate parameter non_block on gfs2_inode_lookup GFS2: Don't filter out I_FREEING inodes anymore GFS2: Prevent delete work from occurring on glocks used for create GFS2: Fix direct IO write rounding error gfs2: avoid uninitialized variable warning GFS2: Check if iopen is held when deleting inode |
||
![]() |
d77bed0d4c |
dlm for 4.6
Previous changes introduced the use of socket error reporting for dlm sockets. This set includes two fixes in how the socket error callbacks are used. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW4ISmAAoJEDgbc8f8gGmqnWgQANnS13rXt4NxnRtNqzrEUmjk NbvP4BxeWKinxhc9ObUnV0CzDllYa2A6Te2AageCQr/qhRKfnnaQJczJ39Xp+289 oSgJJOo4HGCPjshrq9BwGo8ufijUIc0MsT64TzeI3ww58b1eK2CLoC9uiLDyYwjM Hw0PRXU/MAxzOWJIIWgkh78FQmx8fswOSNyK49/p3/INMVNFxn75bd+shtxUOuCp 50gmI6DG4gGJDK3vtIjZStJhW4lcaM3tjGZ9+mcLQF2PZK5zIeHSr3nEfzJ4Qwps 0p55JeiXdfff6RTrxqnJewc+xysmD9594wG0G0VqLsWaLWulDrHZMFsVg1J10frk bk0WwLjsYG/wLVZtKRe+3QwOyqgTxx1Cea8ZYB2yMcFBkDYxFmh8a00kJcVuucnS W+w4rhI9blk1cc4eHhnuBIi5m2jbelu4NPG5722ORtv+gNpBl2ptecqIjfuhr8xE IIF5tnkZb8lBuLyhCmg8in2mKnY5aKSk3kuQ98rDXZUMCLT0PKG2ZNsXJjpX6G38 uQ+sB9rH6c5pIe0S3keS2f2Ly3V7gtBErA0otyxaq/XlxnJeFlLU5G1chHUeW8VP qxhtjDShPuIA97MxE2GA3ehr7r3jbOb+8qOc13E9ygXDyXNN0tb4JIeB0beNLdRx db8Lt+OR10IUawNyuFB9 =qvzY -----END PGP SIGNATURE----- Merge tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "Previous changes introduced the use of socket error reporting for dlm sockets. This set includes two fixes in how the socket error callbacks are used" * tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: DLM: Save and restore socket callbacks properly DLM: Replace nodeid_to_addr with kernel_getpeername |
||
![]() |
faeb20ecfa |
Performance improvements in SEEK_DATA and xattr scalability
improvements, plus a lot of clean ups and bug fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAABCAAGBQJW6c9mAAoJEPL5WVaVDYGjWsEIAJkWUvKB3GgGgP82sKDBP2P8 IbWegO1ICMrSY78BqLI7mLCqggH5JClBgYU3O4VFv8Brj1L9mS5X+vflaDE1j9jj Ik1KZKtZl1opOwO1L3D4l/ipZAiENUp7NehTtpsFousmz6nMZ5vo6x4t3QSwbUIm YXpxUIxHEhBcW5i3EDkfYG8305V5oj8HsVf6T98OlWGpBO5VGNMAHvA7CQdQe7Rd chv70rij5V684bJAEoosEFXVAuOUrxcBqbFA3Nlb432YOPj0ISLx76kw0GIjUYtf yjoSClbRgwxGzh0jm+yaoYjjm83xbsYbHSsBmh3+/QLMbKTLXeCqR/BiqJavmcM= =bWpz -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Performance improvements in SEEK_DATA and xattr scalability improvements, plus a lot of clean ups and bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits) ext4: clean up error handling in the MMP support jbd2: do not fail journal because of frozen_buffer allocation failure ext4: use __GFP_NOFAIL in ext4_free_blocks() ext4: fix compile error while opening the macro DOUBLE_CHECK ext4: print ext4 mount option data_err=abort correctly ext4: fix NULL pointer dereference in ext4_mark_inode_dirty() ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry() ext4: fix misspellings in comments. jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path ext4: more efficient SEEK_DATA implementation ext4: cleanup handling of bh->b_state in DAX mmap ext4: return hole from ext4_map_blocks() ext4: factor out determining of hole size ext4: fix setting of referenced bit in ext4_es_lookup_extent() ext4: remove i_ioend_count ext4: simplify io_end handling for AIO DIO ext4: move trans handling and completion deferal out of _ext4_get_block ext4: rename and split get blocks functions ext4: use i_mutex to serialize unaligned AIO DIO ext4: pack ioend structure better ... |
||
![]() |
364e8dd9d6 |
Configfs changes for the 4.6 merge window:
- A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6Cz6AAoJEA+eU2VSBFGDmNYP/AzJuVdkXjOkzmAl0SjwS0UC b/gTF0Z0jAmXX8QTf0NtdNajHweYyY4PVvyuUYojO/Y9bgJigRC6gHIUviq8TLhO JR1EUJ3RNoWFZSHeEGTM4q+kSg3GkZ83WixeBiMkIZo7QgPXU2YB0mzErpdcID3N +KVnoVU+asVQi656UIDNZ1SawTAGog+tIMIgnM4vmL0Dd+9yN4pYhAmRLLS0C83P DPci/oVx1a3IjWAkmz24qtb9ht/SA+IBwyFPltg/gdn5OgJL9Vr1naW5mkqMhoPF PUBfX9YYizMwNMYuchng6JqyWlZBjXFr6iqi401vFJcILeq27As5Kc9adfDOEvVC V/dWCmTyMlHX507t+lC7kTa6OaHAZKA5scCHA6dgpQIvGfiaMNNu7MW8C6p0HqwY rf7na7S2fAu5zCyIRVPK//YMNbRHh2AoclzpK7Sw0NCV5jBlXZOdDJcSb4jQsVF7 Yy84EqcebvF4ocaFRzwA/ZHNxz65l5Qu7brmOu6pTliQuQED1fop5z92RXkw2e9y rSIgzMCL5IoAUkYtoO1jzAQXzyySAb3QDpwCaBdZLzN4MbRF/dUxZDkOePKTaVft ckNXj5AVzvLYlpkmkhQ+bqsh91ayFH2/gw9Kt38i1yjzNLhsccZwq9ja5ifPlHLQ nOFiane31yp3Zhac8drb =9HqT -----END PGP SIGNATURE----- Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. * tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs: configfs: switch ->default groups to a linked list configfs: Replace CURRENT_TIME by current_fs_time() |
||
![]() |
48d10bda1f |
USB patches for 4.6-rc1
Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp8/EACgkQMUfUDdst+ylsyQCgnVK6ZIFVPV9VijJvBIjxS3F+ fTMAoIMQwNrRMHQOq/lhxX00AgN0B9Ch =2EQp -----END PGP SIGNATURE----- Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ... |
||
![]() |
96b9b1c956 |
TTY/Serial patches for 4.6-rc1
Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin =MLRG -----END PGP SIGNATURE----- Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ... |
||
![]() |
8eee93e257 |
Char/Misc patches for 4.6-rc1
Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp9IcACgkQMUfUDdst+ykyJgCeLTC2QNGrh51kiJglkVJ0yD36 q4MAn0NkvSX2+iv5Jq8MaX6UQoRa4Nun =MNjR -----END PGP SIGNATURE----- Merge tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits) goldfish: Fix build error of missing ioremap on UM nvmem: mediatek: Fix later provider initialization nvmem: imx-ocotp: Fix return value of imx_ocotp_read nvmem: Fix dependencies for !HAS_IOMEM archs char: genrtc: replace blacklist with whitelist drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular drivers: char: mem: fix IS_ERROR_VALUE usage char: xillybus: Fix internal data structure initialization pch_phub: return -ENODATA if ROM can't be mapped Drivers: hv: vmbus: Support kexec on ws2012 r2 and above Drivers: hv: vmbus: Support handling messages on multiple CPUs Drivers: hv: utils: Remove util transport handler from list if registration fails Drivers: hv: util: Pass the channel information during the init call Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload() Drivers: hv: vmbus: remove code duplication in message handling Drivers: hv: vmbus: avoid wait_for_completion() on crash Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages misc: at24: replace memory_accessor with nvmem_device_read eeprom: 93xx46: extend driver to plug into the NVMEM framework eeprom: at25: extend driver to plug into the NVMEM framework ... |
||
![]() |
1a4ab084af |
Driver core patches for 4.6-rc1
Just a few patches this time around for the 4.6-rc1 merge window. Largest is a new firmware driver, but there are some other updates to the driver core in here as well, the shortlog has the details. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlbp9QoACgkQMUfUDdst+ynsOQCghpfAf3CJDr4PWGCKzDJzyQG9 rZYAn2VwKsqHzAxgLXZY5fQIjxSyaLek =Mcvl -----END PGP SIGNATURE----- Merge tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Just a few patches this time around for the 4.6-rc1 merge window. Largest is a new firmware driver, but there are some other updates to the driver core in here as well, the shortlog has the details. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver-core: platform: probe of-devices only using list of compatibles" firmware: qemu config needs I/O ports firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF driver-core: platform: probe of-devices only using list of compatibles driver-core: platform: fix typo in documentation for multi-driver helper component: remove impossible condition drivers: dma-coherent: simplify dma_init_coherent_memory return value devicetree: update documentation for fw_cfg ARM bindings firmware: create directory hierarchy for sysfs fw_cfg entries firmware: introduce sysfs driver for QEMU's fw_cfg device kobject: export kset_find_obj() for module use driver core: bus: use to_subsys_private and to_device_private_bus driver core: bus: use list_for_each_entry* debugfs: Add stub function for debugfs_create_automount(). kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[] |
||
![]() |
45cb5230f8 |
VFIO updates for v4.6-rc1
Various enablers for assignment of Intel graphics devices and future support of vGPU devices (Alex Williamson). This includes - Handling the vfio type1 interface as an API rather than a specific implementation, allowing multiple type1 providers. - Capability chains, similar to PCI device capabilities, that allow extending ioctls. Extensions here include device specific regions and sparse mmap descriptions. The former is used to expose non-PCI regions for IGD, including the OpRegion (particularly the Video BIOS Table), and read only PCI config access to the host and LPC bridge as drivers often depend on identifying those devices. Sparse mmaps here are used to describe the MSIx vector table, which vfio has always protected from mmap, but never had an API to explicitly define that protection. In future vGPU support this is expected to allow the description of PCI BARs that may mix direct access and emulated access within a single region. - The ability to expose the shadow ROM as an option ROM as IGD use cases may rely on the ROM even though the physical device does not make use of a PCI option ROM BAR. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iQIcBAABAgAGBQJW6aT1AAoJECObm247sIsiiP4P/1xf7Z08/2QWVFQzex9CLcZk +/iJlyb/fTpPVQE+NTKPz3Qh5h6ZhSd/57s85IUqq0T6tgVPkoGx8kkyCjBaw2y1 yMezXZlQqJdZqGzQNI4OiHWvO+/vGxYKjQMfUnMlDM6dJgz4lGncGFoSouFPa3Vp mB12hGxrlk1cfIdb+C1KbfZcEdS0WhtigQtz8flBKgOfO+hYWmUO+CClJBhVw8Z4 RNcWNAxFfLuwUPVsPb6uOLG2g65SC2vmQ9k0Tnknf1znV3PFFVjITf0aM6uChLNP S3SgqtPX+6yOFyCuSEs8UKhhmCbeQmAyKgt5BpxV3Rw3OMP4PsVAehr82vQmSj6g 2o96pR2s8MDPBr8eG7gdRe4DQe3PonpLkpDfaghcpYqhkGEqNVeW5/GjiOzGQqD3 xMshzxJ1Iz7DOHkQRUVqOfupDB0TusJmTVKwvXe6yIYL9pjkUS/sbN9U563HYSES JTV68TMj0VKfKwD3XKYXvGH3km1sL4i5NMlAUrsDtsMkGlXEswoGbj82Mjc8+jUo BvWQTJb+kouJQ88VhsO2abg1UrO9E6u82iHFHy9fEObxE8KH7pvROlS93ihMT1Wv WQNuUcltdpHMRVX0BDknaPs3YtC3/TGgm3RcU5SZPbv/ys1471ZmJxMlAAKcfITr SuvkMTYElF5b1pigv46c =/lJn -----END PGP SIGNATURE----- Merge tag 'vfio-v4.6-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: "Various enablers for assignment of Intel graphics devices and future support of vGPU devices (Alex Williamson). This includes - Handling the vfio type1 interface as an API rather than a specific implementation, allowing multiple type1 providers. - Capability chains, similar to PCI device capabilities, that allow extending ioctls. Extensions here include device specific regions and sparse mmap descriptions. The former is used to expose non-PCI regions for IGD, including the OpRegion (particularly the Video BIOS Table), and read only PCI config access to the host and LPC bridge as drivers often depend on identifying those devices. Sparse mmaps here are used to describe the MSIx vector table, which vfio has always protected from mmap, but never had an API to explicitly define that protection. In future vGPU support this is expected to allow the description of PCI BARs that may mix direct access and emulated access within a single region. - The ability to expose the shadow ROM as an option ROM as IGD use cases may rely on the ROM even though the physical device does not make use of a PCI option ROM BAR" * tag 'vfio-v4.6-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: return -EFAULT if copy_to_user fails vfio/pci: Expose shadow ROM as PCI option ROM vfio/pci: Intel IGD host and LCP bridge config space access vfio/pci: Intel IGD OpRegion support vfio/pci: Enable virtual register in PCI config space vfio/pci: Add infrastructure for additional device specific regions vfio: Define device specific region type capability vfio/pci: Include sparse mmap capability for MSI-X table regions vfio: Define sparse mmap capability for regions vfio: Add capability chain helpers vfio: Define capability chains vfio: If an IOMMU backend fails, keep looking vfio/pci: Fix unsigned comparison overflow |
||
![]() |
3c0b8d1c5f |
HSI changes for the v4.6 series
* nokia-modem: add N950 and N9 support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJW6ZcAAAoJENju1/PIO/qafF0P/jXGXdXTAOIQKuPqhOZIM41T gpvDYxIYho5SCm6xbn6YxyGpUG7ENaVFSRB4iQDH8vzvscjpsTcwWFTMVs6ILV3e akbt8zpiKe1CbOQy7hT2sKUxSli87nlVqaksOMdMZbrIy/Z8KeiAWnDeTVQX04v/ wTpeW/EnCHNk5vwFjZWwXnAy+imiP1ICmvdzWnbAK5du1KDMEQbJcKgG8hCcW5hg 8mcddaFzhtQow9RURw0xpwj0qxcXAqPPK4s4Fb5I//LKpKucYHCuiDOaufdKDR3q Vgn7y9XU4ZY0gxFGWr4y7nuW7/C/ObXW8wHnS/JbfCvvZQ9NjOb84LBqi8nDVbl3 Hdj1MQVKu7bpJ2IX9U/D298xWDk7RqIrV0BIZYqogpWWstQUjkMJaXXlUXzeIK1X DwKUYzxKJCJXllMkogqZMHJqtHlow/3FTqasr7v3rMMfu5JjqsRHdUDoZwc7PYQp 3qSIdbfFQs146Q+3jIOw7fonc/KDqUR7XNWaWZCUhEhIQZ62g611fEyAJDgL3UVp Kl0vRMa1e5Zc5RBa7e8wfNF8s2LhSfH8jvwoP2224V7OgmyU2jrIzeP4vORBwWvb unSV4ZbvOY6Q8btKOtruHqB5ZSY2s741qiNxJMVOcEQMMFNdu0/YzCKpA5aq0NsA Jur0Z5I3vxXqFHUG9FSE =gBkN -----END PGP SIGNATURE----- Merge tag 'hsi-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "nokia-modem: add N950 and N9 support" * tag 'hsi-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: ssi-protocol: Use handshake logic from n950 HSI: nokia-modem: add n950 and n9 support |
||
![]() |
9cc984e4bc |
power supply and reset changes for the v4.6 series
* add types for USB Type C and PD chargers * add act8945a charger driver * add ACPI/DT bindings for goldfish-battery * add support for versatile reset controller * misc. fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJW6XstAAoJENju1/PIO/qaSmMP+gJY9U4yPscEoW2UkvKJ2y81 /Bxvy8GWSnnaFFPLMHYk/n53EPJbPnewETBftv1xRHzgJ6wQlgM/5EAEU2Qwud+A V8K3V8VStIZLIrQ1tU8r10UE5OW95lsupCAlFp9AHYrBgIiRDUHlqWtxuhwH12F2 uLZt7moLHJFZtvg3EWl4agsvoEWfqPOKwmOpda+PyIUOlZrAIu3nItvKwBKWdvr3 WuomqfknkekkvX2lSB8R4OfE+w4fkYTFak2+4ymNiaQWrLeEqLuJbICUNGMD+APb nX8TmQ8wmYYHLZTu455ctGJIdpYfrRI/IPAsdW/vMYnQ/8GiO0dgke5dfzZU08Du PAWb/NM2pjFfG76fqG46hQPq/Jsns9k/SM1e3Q6fCkwewqtx8P56vUML6FtomYe7 HP3oPqlNeEpcF/jMmxKfSNiF78pmRLpCkWuhhYaT4Suv8bJhoQRE7Ur00Y47hp9i taAIDE3HNFucqTEXMudBktEKsDPRpEx2K1fZEvZbCF8sOUK4xWPQr1yuPTXrM7jm sWl/T4s1tn9/P6esdZUTXGghBiehj71mCHsOfXBQZPifaB2s8uINEf+GHQyQcLL4 X2HiMWrv9Pyn+PLVVwWRmTpSVIFWrCHNQPQ1ofgsgWkrEqsAbdZ4O2srlCqg/4WL irCHBm6fbGpoVRQHg3xS =L4ho -----END PGP SIGNATURE----- Merge tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: - add types for USB Type C and PD chargers - add act8945a charger driver - add ACPI/DT bindings for goldfish-battery - add support for versatile reset controller - misc fixes * tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits) power: pm2301-charger: use __maybe_unused to hide pm functions power: ipaq-micro-battery: use __maybe_unused to hide pm functions power_supply: 88pm860x_charger: do not pass NULL to power_supply_put jz4740-battery: Correct voltage change check power_supply: lp8788-charger: initialize boolean 'found' goldfish: Enable ACPI-based enumeration for goldfish battery power: goldfish_battery: add devicetree bindings power: act8945a: add charger driver for ACT8945A power: add documentation for ACT8945A's charger DT bindings ARM: dts: n900: Rename isp1704 to isp1707 to match correct name power_supply: bq27xxx_battery: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Add of modalias and match table when CONFIG_OF is enabled power_supply: bq2415x_charger: Do not add acpi modalias when CONFIG_ACPI is not enabled power_supply: isp1704_charger: Add compatible of match for nxp,isp1707 power_supply: isp1704_charger: Error messages when probe fail power_supply: Add types for USB Type C and PD chargers power: bq24735-charger: add 'ti,external-control' option power: bq24735-charger: document 'ti,external-control' option power: bq24735-charger: fix failed i2c with ac-detect power: reset: Fix dependencies for !HAS_IOMEM archs ... |
||
![]() |
b5b131c747 |
dmaengine updates for 4.6
This is smallish update with minor changes to core and new driver and usual updates. Nothing super exciting here.. - We have made slave address as physical to enable driver to do the mapping. - We now expose the maxburst for slave dma as new capability so clients can know this and program accordingly - addition of device synchronize callbacks on omap and edma. - pl330 updates to support DMAFLUSHP for Rockchip platforms. - Updates and improved sg handling in Xilinx VDMA driver. - New hidma qualcomm dma driver, though some bits are still in progress -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6W4OAAoJEHwUBw8lI4NHIj0P/0UEXOn9Laj1dQ++3RuEHtJH AvolC574yj/jdvhNNRAu3TBq214VDtVu+OEi6cAwybSMUOT0lbrSEI4a6K6iDIdH QGfyz2PFDBMnNLqqNfeQulgB6YgoZ/7PXUOz9D+FX4wyM3poTBb9J2JI5okFuuJI r4jmiZrXTZSmm2NTbG0QxHogoyvMDA59EB8cIgAUrl1rDssPkdvzU7ygW6qc5CMW 33tQFyz6Q74EI9ImPeYUkSf1zzT1va4uRce+3lEmLSvtOWG2pjOOZ1Vw89vtkyal yX1eH06glVTQwpfV+fgmbjpn72Ftk+G6rqcB4aICSyN2dH7Gf4D+Dqjp1mdEHyFf Oum5pWNPzJ97HoGLwxd8FEuA3ma3C0nC+nDl+ffNWLmIDGgeqFHSQaNBlf2S6y+a VtGFJ0EaR//qIpwvPNfpJbkwjrEaEFdSYQcdpGcPPeTeOOpaLGkmJ/2kD2rpGSNC iPh+G/h7sJYLFyiG7C6GeuWxShzSL+LpZqv0ks5i/QKmSNXWsvVQexAlBW43R385 uQkZSWOlzUwmGlTj9XUI2mUxhI73SgKt+WZ9wrJWvIThBHRwwSIln+72SzQ8d4ys Smv3DkGt4gCxHmsV+G3nEIBlviECJn2KaaN450D6FVxgQ40yGV5gWAVX4yAWo2De uMnQMDamjoajgbeanpbM =wCCJ -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This is smallish update with minor changes to core and new driver and usual updates. Nothing super exciting here.. - We have made slave address as physical to enable driver to do the mapping. - We now expose the maxburst for slave dma as new capability so clients can know this and program accordingly - addition of device synchronize callbacks on omap and edma. - pl330 updates to support DMAFLUSHP for Rockchip platforms. - Updates and improved sg handling in Xilinx VDMA driver. - New hidma qualcomm dma driver, though some bits are still in progress" * tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms dmaengine: add Qualcomm Technologies HIDMA channel driver dmaengine: add Qualcomm Technologies HIDMA management driver dmaengine: hidma: Add Device Tree binding dmaengine: qcom_bam_dma: move to qcom directory dmaengine: tegra: Move of_device_id table near to its user dmaengine: xilinx_vdma: Remove unnecessary variable initializations dmaengine: sirf: use __maybe_unused to hide pm functions dmaengine: rcar-dmac: clear pertinence number of channels dmaengine: sh: shdmac: don't open code of_device_get_match_data() dmaengine: tegra: don't open code of_device_get_match_data() dmaengine: qcom_bam_dma: Make driver work for BE dmaengine: sun4i: support module autoloading dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's dmaengine: xilinx_vdma: Simplify spin lock handling dmaengine: xilinx_vdma: Fix issues with non-parking mode dmaengine: xilinx_vdma: Improve SG engine handling dmaengine: pl330: fix to support the burst mode dmaengine: make slave address physical ... |
||
![]() |
c7eec380e8 |
remoteproc updates for v4.6
New driver for controlling ST's remote processors and a couple of minor fixes. Also includes the addition of myself as co-maintainer. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW559TAAoJEAsfOT8Nma3FsXwP/Am3lkIaJ+FLd3tbKBxfodkx ww4cgbo4bz0IPQKFTJVo0pvtQ+GzRkJnOWJTbX3qhFXv6SaHhTiX4cVdUXS2QARz 5irb3p5PJCRhx9ZH+4jZ4vJbweCk8rQEaubgYMajVMamgLGbO3o39pzN/82l3hBG Fd4vtttkw6f3a/y2Oq3ShAN3auSRbOvzOxPpr0+VmOYfSwaoyvP2fU4lT3YtVPNA hVurFrt8HSALDCL1Igj9lDsHjzVORqTsZPnyvNU1OrdoIi1DaVRKmnApgxEBKHgS AObCDwXDR9kybQ0BQ3GpRMYv5KZw4KdfA3a1R7z8ab1Iny86ncMAt4L7ksrKvXrm pCYZbpPRdKZMTnXdLTXlm76HRxwW0Q6ExyKJC6V1tixsL/KsnXMnjaxfUDeBwMAG B7ydy0YX4rm95veDDFZFBaOP0oFg3mm9v/snYoNOOAp7spoiGKXolQENS/zlyhBR R6vTw35Goqpcb5jHBlo7QdMpaRhqUAIHUoX/z1OJpg9eeFfFErWCfrSZJSZDQ9rL TA2m7q6pb+S5hmCKvXox2DIdRgTGYMiloG3W2FNmc0SwW4pT4pN8pdqFJaa9C3qX /p5uR7Geak0KBLTYWd6IHd4fILX0ktpuRKF+lbzNaG+40ato/C8U7l78kcIQemY2 Nlz65X3c8ZTuNy08UprT =2rNj -----END PGP SIGNATURE----- Merge tag 'rproc-v4.6' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "New driver for controlling ST's remote processors and a couple of minor fixes. Also includes the addition of myself as co-maintainer" Acked-by: Ohad Ben-Cohen <ohad@wizery.com> * tag 'rproc-v4.6' of git://github.com/andersson/remoteproc: MAINTAINERS: Add co-maintainer for remoteproc subsystems remoteproc: Supply controller driver for ST's Remote Processors remoteproc: debugfs: Add ability to boot remote processor using debugfs remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver remoteproc: debugfs: Return error on invalid 'count' value remoteproc/wkup_m3: Use MODULE_DEVICE_TABLE to export alias remoteproc: report error if resource table doesn't exist |
||
![]() |
37aa7319cd |
Another relatively boring cycle for the docs tree: typo fixes, translation
updates, etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6IqKAAoJEI3ONVYwIuV6zawP/2NG5Rh9a/6B9YbtVsXZrWD+ wCK80j+tbH9yAba54GjdJ2nvMKSYpC62ti4sPwtdSllvd0/e2ZnS4ZLa9sSoMDsH GK10mYhUcosDfeNCadT66Wl9o8ICu2QqNvGUtjI1331dcjAKBxLjJfaVQ9nddcdP Ksr8+ATr1rQE8YfxdprOnaX06C0FKqaQfRWdBl4FNDh6pb6eeXWnP56A+m3zi7e8 R2uJGlHwxq3qS27JkQDwiWFb7FVPt1H6bfM9DcgiGfItfgoosW1cExxND4MoqEZT 8ATE1H4Zbn6QOkq88Wo4vDn3gDIsgy7D7rS69juFNzCajxIOaN8NfPusGFmTCpQU cuh6XDYKS2n05RU0tuLB9NxTd+1b50COVHD//dEhjvpF+Z7Ku6yM2LrhTYYvoAsm XFYUUrJ8i09D0hllRA8WGE+AYGLvyFV9AE1mJQPepx+9TjBluKuqIoig03kEWfof 3xXhigFy+WttLQZiqten3YMVSo4xQRNq7FgqZ20dPMF1Exnj1wkwDFrE3SBB3Xcv 3eN953O12JzL7ja+9/OPMKZt8xs/tzLAScMP4R/nXGG050aecRH/xFFrOlzPDdyQ oshon67cMGi5qJdHaOkALqwz89euXv/AMHxGixu1M0zJG81WQm1u6vi9lY7b8Y3q ojA8vgsG3AprS9nmxqVh =wBKa -----END PGP SIGNATURE----- Merge tag 'docs-for-linus' of git://git.lwn.net/linux Pul documentation update from Jon Corbet: "Another relatively boring cycle for the docs tree: typo fixes, translation updates, etc" * tag 'docs-for-linus' of git://git.lwn.net/linux: modsign: Fix documentation on module signing enforcement parameter. Doc: nfs: Fix typos in Documentation/filesystems/nfs Documentation: kselftest: Remove duplicate word doc: fix grammar Documentation: Howto: Fixed subtitles style Doc: ARM: Fix a typo in clksrc-change-registers.awk Documentation/ko_KR: update maintainer information Documentation: Fix int/unsigned int comparison Documentation: Chinese translation of arm64/silicon-errata.txt Documentation:Update Documentation/zh_CN/arm64/booting.txt Documentation: HOWTO: remove obsolete info about regression postings Doc: ja_JP: Fix a typo in HOWTO Doc: i2c: Fix typo in Documentation/i2c Doc: DocBook: Fix a typo in device-drivers.tmpl Remove "arch" usage in Documentation/features/list-arch.sh README: cosmetic fixes Documentation/CodingStyle: add space before parenthesis in example macro SubmittingPatches: fix spelling of "git send-email" |