Commit Graph

2603 Commits

Author SHA1 Message Date
Manuel Lauss
197b0d31eb MIPS: Alchemy: pb1200: update CPLD cascade irq handler.
Tested on Db1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:26 +00:00
Manuel Lauss
785e3268e2 MIPS: Alchemy: update core interrupt code.
This patch attempts to modernize core Alchemy interrupt handling code.

- add irq_chips for irq controllers instead of irq type,
- add a set_type() hook to change irq trigger type during runtime,
- add a set_wake() hook to control GPIO0..7 based wakeup,
- use linux' IRQF_TRIGGER_ constants instead of homebrew ones,
- enable GENERIC_HARDIRQS_NO__DO_IRQ.
- simplify plat_irq_dispatch
- merge au1xxx_irqmap into irq.c file, the only place where its
  contents are referenced.
- board_init_irq() is now mandatory for every board; use it to register
  the remaining (gpio-based) interrupt sources; update all boards
  accordingly.

Run-tested on Db1200 and other Au1200 based platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
2009-01-11 09:57:26 +00:00
Manuel Lauss
7179380ee9 MIPS: Alchemy: move commandline mangling out of common code
Not every alchemy-based board might want these options forced on it,
and most of this stuff seems to be intended for devboard code anyway.
Remove commandline mangling code out of common chip code and instead
add relevant sections to all in-tree boards to not change existing
behaviour.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:25 +00:00
Manuel Lauss
23ba25d566 MIPS: Alchemy: devboards: consolidate files
Share some code and merge small files:
- Extract the prom init code from all devboard files (they only differ in
  memory configuration).
- Merge the irq configuration into board setup code.
- Merge smaller files into board setup code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c
 create mode 100644 arch/mips/alchemy/devboards/prom.c
2009-01-11 09:57:25 +00:00
Manuel Lauss
58e75e86cf MIPS: Alchemy: Move development board code to common subdirectory
This should ease sharing of common devboard code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:25 +00:00
David Daney
a86c7f7245 MIPS: Add Cavium OCTEON to arch/mips/Kconfig
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:25 +00:00
David Daney
551d9304de MIPS: Add defconfig for Cavium OCTEON.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:25 +00:00
David Daney
843aef4930 MIPS: Adjust the dma-common.c platform hooks.
We add a dev parameter to plat_unmap_dma_mem(), and hooks for
plat_dma_supported() and plat_extra_sync_for_device() which should be
nop changes for all existing targets.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney
ec454d8c4f MIPS: Add Cavium OCTEON slot into proper tlb category.
Expand the case statement for build_tlb_write_entry so that it does
the right thing on Cavium CPU variants.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney
126336f065 MIPS: Compute branch returns for Cavium OCTEON specific branch instructions.
For Cavium OCTEON, compute the return epc value for OCTEON specific
branch instructions.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney
2a219b0eaa MIPS: Cavium OCTEON multiplier state preservation.
For OCTEON, implement a save and restore of the multiplier state
across context switches.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney
ddcdb1b4a4 MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney
babed55569 MIPS: Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.c
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:23 +00:00
David Daney
b5e00af81f MIPS: Add Cavium OCTEON cop2/cvmseg state entries to processor.h.
Add in the cop2 and cvmseg state info to the known proc reg
data for Cavium so that it can be tracked, saved, restored.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney
8faca49a67 MIPS: Modify core io.h macros to account for the Octeon Errata Core-301.
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney
7e69deb83c MIPS: Hook up Cavium OCTEON in arch/mips.
Take all the OCTEON specific files that were added, and hook them into
the build system for the arch/mips.  For versions of GCC that lack
OCTEON support, override gas target architecture.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney
47d979eca3 MIPS: Hook Cavium OCTEON cache init into cache.c
Follow precedent of other boards, and hook-up the CPU specific cache
init.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney
0dd4781bca MIPS: Add Cavium OCTEON processor constants and CPU probe.
Add OCTEON constants to asm/cpu.h and asm/module.h.

Add probe function for Cavium OCTEON CPUs and hook it up.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney
25c3000300 MIPS: Override assembler target architecture for octeon.
Gas from binutils 2.19 fails to compile some cop1 instructions with
-march=octeon.  Since the cop1 instructions are present in mips1, use
that arch instead.  This will be fixed in binutils 2.20.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney
ed918c2daf MIPS: Add Cavium OCTEON specific register definitions to mipsregs.h
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney
f9bb4cf37a MIPS: For Cavium OCTEON set hwrena and lazily restore CP2 state.
If on Cavium, be aware of cop2 and hwrena during do_cpu().

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney
bd6d85c21a MIPS: For Cavium OCTEON handle hazards as per the R10000 handling.
For Cavium CPU, we treat the same as R10000, in that all hazards
are dealt with in hardware.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney
5b3b16880f MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.
These are the rest of the new files needed to add OCTEON processor
support to the Linux kernel.  Other than Makefile and Kconfig which
should be obvious, we have:

csrc-octeon.c   -- Clock source driver for OCTEON.
dma-octeon.c    -- Helper functions for mapping DMA memory.
flash_setup.c   -- Register on-board flash with the MTD subsystem.
octeon-irq.c    -- OCTEON interrupt controller managment.
octeon-memcpy.S -- Optimized memcpy() implementation.
serial.c        -- Register 8250 platform driver and early console.
setup.c         -- Early architecture initialization.
smp.c           -- OCTEON SMP support.
octeon_switch.S -- Scheduler context switch for OCTEON.
c-octeon.c      -- OCTEON cache controller support.
cex-oct.S       -- OCTEON cache exception handler.

asm/mach-cavium-octeon/*.h -- Architecture include files.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S
2009-01-11 09:57:21 +00:00
David Daney
58f07778ce MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon/executive and asm/octeon.
These files are used to coordinate resource sharing between all of
the programs running on the OCTEON SOC.  The OCTEON processor has many
CPU cores (current parts have up to 16, but more are possible).  It
also has a variety of on-chip hardware blocks for things like network
acceleration, encryption and RAID.

One typical configuration is to run Linux on several of the CPU cores,
and other dedicated applications on the other cores.

Resource allocation between the various programs running on the system
(Linux kernel and other dedicated applications) needs to be
coordinated.  The code we use to do this we call the 'executive'.  All
of this resource allocation and sharing code is gathered together in
the executive directory.

Included in the patch set are the following files:

cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation.
All memory used by the Linux kernel is obtained here at boot time.

cvmx-l2c.c -- Coordinates operations on the shared level 2 cache.

octeon-model.c  -- Probes chip capabilities and version.

The corresponding headers are in asm/octeon.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/executive/Makefile
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
 create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c
 create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-model.h
2009-01-11 09:57:20 +00:00
David Daney
54293ec307 MIPS: Add Cavium OCTEON processor CSR definitions
Here we define the addresses and bit-fields of the Configuration and
Status Registers (CSRs) for some of the hardware functional units on
the OCTEON SOC.

Definitions are needed for:

CIU  -- Central Interrupt Unit.
GPIO -- General Purpose Input Output.
IOB  -- Input / Output {Busing,Bridge}.
IPD  -- Input Packet Data unit.
L2C  -- Level-2 Cache controller.
L2D  -- Level-2 Data cache.
L2T  -- Level-2 cache Tag.
LED  -- Light Emitting Diode controller.
MIO  -- Miscellaneous Input / Output.
POW  -- Packet Order / Work unit.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:20 +00:00
Julia Lawall
2bd2dd059c MIPS: Alchemy: Change strict_strtol to strict_strtoul
Since memsize is unsigned, it would seem better to use strict_strtoul that
strict_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@s2@
long e;
position p;
@@

strict_strtol@p(...,&e)

@@
position p != s2.p;
type T;
T e;
@@

- strict_strtol@p
+ strict_strtoul
  (...,&e)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:19 +00:00
Anirban Sinha
797c3f3224 MIPS: 64-bit: Use generic 32-bit ptrace compat code.
Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:19 +00:00
Linus Torvalds
b424e8d3b4 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits)
  PCI PM: Put PM callbacks in the order of execution
  PCI PM: Run default PM callbacks for all devices using new framework
  PCI PM: Register power state of devices during initialization
  PCI PM: Call pci_fixup_device from legacy routines
  PCI PM: Rearrange code in pci-driver.c
  PCI PM: Avoid touching devices behind bridges in unknown state
  PCI PM: Move pci_has_legacy_pm_support
  PCI PM: Power-manage devices without drivers during suspend-resume
  PCI PM: Add suspend counterpart of pci_reenable_device
  PCI PM: Fix poweroff and restore callbacks
  PCI: Use msleep instead of cpu_relax during ASPM link retraining
  PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions
  PCI: PCIe portdrv: Rearrange code so that related things are together
  PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services
  PCI: PCIe portdrv: Add kerneldoc comments to some core functions
  x86/PCI: Do not use interrupt links for devices using MSI-X
  net: sfc: Use pci_clear_master() to disable bus mastering
  PCI: Add pci_clear_master() as opposite of pci_set_master()
  PCI hotplug: remove redundant test in cpq hotplug
  PCI: pciehp: cleanup register and field definitions
  ...
2009-01-07 15:41:01 -08:00
Linus Torvalds
a0c9f240a9 Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: remove write-only variable in proc_pident_lookup()
  proc: fix sparse warning
  proc: add /proc/*/stack
  proc: remove '##' usage
  proc: remove useless WARN_ONs
  proc: stop using BKL
2009-01-07 12:01:06 -08:00
Linus Torvalds
57c44c5f6f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...
2009-01-07 11:31:52 -08:00
Bjorn Helgaas
67eed58060 PCI: mips: use generic INTx swizzle from PCI core
Use the generic pci_common_swizzle() instead of arch-specific code.

Note that pci_common_swizzle() loops based on dev->bus->self, not
dev->bus->parent as the mips common_swizzle() did.  I think they
are equivalent for this purpose.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:14 -08:00
Bjorn Helgaas
30d546dac9 PCI: mips: use generic pci_swizzle_interrupt_pin()
Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code.

Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:55 -08:00
Harvey Harrison
8cdd3a9261 mips: introduce asm/swab.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 18:10:27 -08:00
Linus Torvalds
40d7ee5d16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits)
  uio: make uio_info's name and version const
  UIO: Documentation for UIO ioport info handling
  UIO: Pass information about ioports to userspace (V2)
  UIO: uio_pdrv_genirq: allow custom irq_flags
  UIO: use pci_ioremap_bar() in drivers/uio
  arm: struct device - replace bus_id with dev_name(), dev_set_name()
  libata: struct device - replace bus_id with dev_name(), dev_set_name()
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  block: struct device - replace bus_id with dev_name(), dev_set_name()
  chris: struct device - replace bus_id with dev_name(), dev_set_name()
  dmi: struct device - replace bus_id with dev_name(), dev_set_name()
  gadget: struct device - replace bus_id with dev_name(), dev_set_name()
  gpio: struct device - replace bus_id with dev_name(), dev_set_name()
  gpu: struct device - replace bus_id with dev_name(), dev_set_name()
  hwmon: struct device - replace bus_id with dev_name(), dev_set_name()
  i2o: struct device - replace bus_id with dev_name(), dev_set_name()
  IA64: struct device - replace bus_id with dev_name(), dev_set_name()
  i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()
  infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
  ISDN: struct device - replace bus_id with dev_name(), dev_set_name()
  ...
2009-01-06 17:02:07 -08:00
Matthew Wilcox
ea43546750 atomic_t: unify all arch definitions
The atomic_t type cannot currently be used in some header files because it
would create an include loop with asm/atomic.h.  Move the type definition
to linux/types.h to break the loop.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:10 -08:00
Kay Sievers
1bb5beb49f mips: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:38 -08:00
Frederik Schwarzer
025dfdafe7 trivial: fix then -> than typos in comments and documentation
- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:06 +01:00
Ken Chen
2ec220e27f proc: add /proc/*/stack
/proc/*/stack adds the ability to query a task's stack trace. It is more
useful than /proc/*/wchan as it provides full stack trace instead of single
depth. Example output:

	$ cat /proc/self/stack
	[<c010a271>] save_stack_trace_tsk+0x17/0x35
	[<c01827b4>] proc_pid_stack+0x4a/0x76
	[<c018312d>] proc_single_show+0x4a/0x5e
	[<c016bdec>] seq_read+0xf3/0x29f
	[<c015a004>] vfs_read+0x6d/0x91
	[<c015a0c1>] sys_read+0x3b/0x60
	[<c0102eda>] syscall_call+0x7/0xb
	[<ffffffff>] 0xffffffff

[add save_stack_trace_tsk() on mips, ACK Ralf --adobriyan]
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-05 12:27:44 +03:00
Linus Torvalds
7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Mike Travis
7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Al Viro
18d8fda7c3 take init_fs to saner place
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31 18:07:42 -05:00
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Linus Torvalds
a39b863342 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  sched: fix warning in fs/proc/base.c
  schedstat: consolidate per-task cpu runtime stats
  sched: use RCU variant of list traversal in for_each_leaf_rt_rq()
  sched, cpuacct: export percpu cpuacct cgroup stats
  sched, cpuacct: refactoring cpuusage_read / cpuusage_write
  sched: optimize update_curr()
  sched: fix wakeup preemption clock
  sched: add missing arch_update_cpu_topology() call
  sched: let arch_update_cpu_topology indicate if topology changed
  sched: idle_balance() does not call load_balance_newidle()
  sched: fix sd_parent_degenerate on non-numa smp machine
  sched: add uid information to sched_debug for CONFIG_USER_SCHED
  sched: move double_unlock_balance() higher
  sched: update comment for move_task_off_dead_cpu
  sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares
  sched/rt: removed unneeded defintion
  sched: add hierarchical accounting to cpu accounting controller
  sched: include group statistics in /proc/sched_debug
  sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER
  sched: clean up SCHED_CPUMASK_ALLOC
  ...
2008-12-28 12:27:58 -08:00
Rusty Russell
b4a2f916a8 cpumask: Mips: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask
Impact: New APIs

The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these
return a pointer to a struct cpumask.  Part of removing cpumasks from
the stack.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ralf Baechle <ralf@linux-mips.org>
2008-12-26 22:23:40 +10:30
Ingo Molnar
4e202284e6 Merge branch 'sched/urgent'; commit 'v2.6.28' into sched/core 2008-12-25 13:42:23 +01:00
James Morris
cbacc2c7f0 Merge branch 'next' into for-linus 2008-12-25 11:40:09 +11:00
David Daney
ed2b03ed3c MIPS: MIPS64R2: Fix buggy __arch_swab64
The way the code is written it was assuming dshd has the function of a
hypothetical dshw instruction ...

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-22 08:54:47 +00:00
David Daney
08d9d1c4d4 MIPS: Fix preprocessor warnings flaged by GCC 4.4
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-22 08:54:47 +00:00
Ingo Molnar
c3895b01e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-ingo into cpus4096 2008-12-16 12:24:38 +01:00
Ingo Molnar
3c68b4a807 Merge branch 'linus' into cpus4096 2008-12-16 12:24:30 +01:00
Rusty Russell
968ea6d80e Merge ../linux-2.6-x86
Conflicts:

	arch/x86/kernel/io_apic.c
	kernel/sched.c
	kernel/sched_stats.h
2008-12-13 21:55:51 +10:30
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Rusty Russell
0de26520c7 cpumask: make irq_set_affinity() take a const struct cpumask
Impact: change existing irq_chip API

Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.

Fortunately, not widely used code, but hits a few architectures.

Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly.  Ingo, does this break anything?

(Folded in fix from KOSAKI Motohiro)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
2008-12-13 21:20:26 +10:30
Rusty Russell
29c0177e6a cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.
Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
2008-12-13 21:20:25 +10:30
Rusty Russell
98a79d6a50 cpumask: centralize cpu_online_map and cpu_possible_map
Impact: cleanup

Each SMP arch defines these themselves.  Move them to a central
location.

Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
   CONFIG_INIT_ALL_POSSIBLE for this rather than break them.

2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
   Those archs simply have phys_cpu_present_map replaced everywhere.

3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
   so I just manipulate them both in sync.

4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
   declarations.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
2008-12-13 21:19:41 +10:30
David Daney
6d8a52d7f0 MIPS: IP32: Update defconfig
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 18:12:23 +00:00
David Daney
11531ac2d3 MIPS: Add missing calls to plat_unmap_dma_mem.
dma_free_noncoherent() and dma_free_coherent() are missing calls to
plat_unmap_dma_mem().  This patch adds them.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 18:12:23 +00:00
Dmitri Vorobiev
00ace20716 MIPS: Kconfig: Fix the arch-specific header path
The header path in the help text for the RUNTIME_DEBUG config option is
obsolete and needs to be updated to match the new location of
architecture-specific header files. While at it, fix the spelling mistake.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 18:12:23 +00:00
David Daney
b6354db5bb MIPS: Use EI/DI for MIPS R2.
For MIPS R2, use the EI and DI instructions to enable and disable
interrupts.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-12 18:12:23 +00:00
Ingo Molnar
45ab6b0c76 Merge branch 'sched/core' into cpus4096
Conflicts:
	include/linux/ftrace.h
	kernel/sched.c
2008-12-12 13:48:57 +01:00
Ingo Molnar
c1dfdc7597 Merge commit 'v2.6.28-rc8' into sched/core 2008-12-12 10:29:35 +01:00
Linus Torvalds
942c88cc11 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Better than nothing implementation of PCI mmap to fix X.
2008-12-10 10:03:55 -08:00
Ralf Baechle
98873f53be MIPS: Better than nothing implementation of PCI mmap to fix X.
Certain X11 servers such as the SIS server will only work if PCI mmap is
implemented.  This patch implements PCI mmap but to be on the same side
so close to a release it only supports uncached mappings so performance
will not be optimal for some uses such as framebuffers.

Thanks to Zhang Le <r0bertz@gentoo.org> for the original report and
testing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-09 21:55:43 +00:00
Ingo Molnar
4d117c5c6b Merge branch 'sched/urgent' into sched/core 2008-12-08 13:52:00 +01:00
Nick Andrew
8ebcfc8bcb MIPS: Fix incorrect use of loose in vpe.c
It should be 'lose', not 'loose'.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-05 18:19:23 +00:00
David Daney
c6cb4df96f MIPS: Return ENOSYS from sys32_syscall on 64bit kernels like elsewhere.
When the o32 errno was changed to ENOSYS, we forgot to update the code
for 64bit kernels.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:28 +00:00
Ralf Baechle
8d13cb26cd MIPS: 64-bit: vmsplice needs to use the compat wrapper for o32 and N32.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:28 +00:00
Ralf Baechle
08d30879a6 MIPS: o32: Fix number of arguments to splice(2).
The syscall code was assuming splice only takes 4 arguments so no stack
arguments were being copied from the userspace stack to the kernel stack.
As the result splice was likely to fail with EINVAL.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:28 +00:00
Ralf Baechle
566a3b9557 MIPS: Malta: Consolidate platform device code.
After adding the RTC platform device to malta-platform.c malta-mtd.c should
get unified with the rest of the platform device code.
2008-12-04 17:47:28 +00:00
Ralf Baechle
3e27cce60e MIPS: IP22, Fulong, Malta: Update defconfigs.
These haven't seen much attention for too long but particularly important
enable RTC_CLASS and CONFIG_RTC_HCTOSYS so the wall clock time is set on
kernel startup.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:28 +00:00
Tiejun Chen
192cc7f090 MIPS: Malta: Add back RTC support
With the conversion of MIPS to RTC_LIB the old RTC driver CONFIG_RTC became
unselectable.  Fix by setting up a platform device.  Also enable
RTC_CLASS so system time gets set from RTC on kernel initialization.

[Ralf: Original patch by Tiejun; polished nice and shiny by me]

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:27 +00:00
Vlad Malov
e807f9574e MIPS: Fix potential DOS by untrusted user app.
On a 64 bit kernel if an o32 syscall was made with a syscall number less
than 4000, we would read the function from outside of the bounds of the
syscall table.  This led to non-deterministic behavior including system
crashes.

While we were at it we reworked the 32 bit version as well to use fewer
instructions.  Both 32 and 64 bit versions are use the same code now.

Signed-off-by: Vlad Malov <Vlad.Malov@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-12-04 17:47:26 +00:00
James Morris
ec98ce480a Merge branch 'master' into next
Conflicts:
	fs/nfsd/nfs4recover.c

Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().

Signed-off-by: James Morris <jmorris@namei.org>
2008-12-04 17:16:36 +11:00
Ingo Molnar
a64d31baed Merge branch 'linus' into cpus4096
Conflicts:
	kernel/trace/ring_buffer.c
2008-12-02 20:09:50 +01:00
Christoph Hellwig
96b8936a9e remove __ARCH_WANT_COMPAT_SYS_PTRACE
All architectures now use the generic compat_sys_ptrace, as should every
new architecture that needs 32bit compat (if we'll ever get another).

Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also
kill a comment about __ARCH_SYS_PTRACE that was added after
__ARCH_SYS_PTRACE was already gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 11:00:15 -08:00
Ingo Molnar
1c39194878 sched: convert struct root_domain to cpumask_var_t, fix
Mathieu Desnoyers reported this build failure on powerpc:

 kernel/sched.c: In function 'sd_init_NODE':
 kernel/sched.c:7319: error: non-static initialization of a flexible array member
 kernel/sched.c:7319: error: (near initialization for '(anonymous)')

this happens because .span changed to cpumask_var_t, hence
the static CPU_MASK_NONE initializers in the SD_*_INIT
templates are not type-correct anymore.

Remove them, as they default to empty anyway.

Also remove them from IA64, MIPS and SH.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 14:14:07 +01:00
David Daney
8ec2e24356 MIPS: Make BUG() __noreturn.
Often we do things like put BUG() in the default clause of a case
statement.  Since it was not declared __noreturn, this could sometimes
lead to bogus compiler warnings that variables were used
uninitialized.

There is a small problem in that we have to put a magic while(1); loop to
fool GCC into really thinking it is noreturn.  This makes the new
BUG() function 3 instructions long instead of just 1, but I think it
is worth it as it is now unnecessary to do extra work to silence the
'used uninitialized' warnings.

I also re-wrote BUG_ON so that if it is given a constant condition, it
just does BUG() instead of loading a constant value in to a register
and testing it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-24 16:35:07 +00:00
Ingo Molnar
fc02e90c34 Merge commit 'v2.6.28-rc6' into sched/core 2008-11-21 08:57:04 +01:00
Ralf Baechle
a24e849c01 MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20 19:42:33 +00:00
Ralf Baechle
664c4bbb73 MIPS: csrc-r4k: Fix spelling mistake.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20 19:42:33 +00:00
Phil Sutter
2e373952cc MIPS: RB532: Provide functions for gpio configuration
As gpiolib doesn't support pin multiplexing, it provides no way to
access the GPIOFUNC register. Also there is no support for setting
interrupt status and level. These functions provide access to them and
are needed by the CompactFlash driver.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20 19:42:33 +00:00
Dmitri Vorobiev
f43909dfb3 MIPS: IP22: Make indy_sc_ops variable static
The indy_sc_ops variable in arch/mips/mm/sc-ip22.c is needlessly defined
global, and this patch makes it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
2008-11-20 19:42:33 +00:00
Florian Fainelli
1b432840d0 MIPS: RB532: GPIO register offsets are relative to GPIOBASE
This patch fixes the wrong use of GPIO register offsets
in devices.c. To avoid further problems, use gpio_get_value
to return the NAND status instead of our own expanded code.

Also define the zero offset of the alternate function register to allow
consistent access.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20 19:42:32 +00:00
David Daney
9e86786a4b MIPS: Malta: Fix include paths in malta-amon.c
On linux-queue, malta doesn't build after the include file relocation.
This should fix it.

There some occurrences of 'asm-mips' in the comments of quite a few
files, but this is the only place I found it in any code.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-11-20 19:42:32 +00:00
David Howells
d76b0d9b2d CRED: Use creds in file structs
Attach creds to file structs and discard f_uid/f_gid.

file_operations::open() methods (such as hppfs_open()) should use file->f_cred
rather than current_cred().  At the moment file->f_cred will be current_cred()
at this point.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:25 +11:00
David Howells
b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells
b4212737a3 CRED: Wrap task credential accesses in the MIPS arch
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:37 +11:00
Ingo Molnar
ae1e9130bf sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER
Impact: cleanup, change .config option name

We had this ugly config name for a long time for hysteric raisons.
Rename it to a saner name.

We still cannot get rid of it completely, until /proc/<pid>/stack
usage replaces WCHAN usage for good.

We'll be able to do that in the v2.6.29/v2.6.30 timeframe.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 08:59:20 +01:00
Ralf Baechle
09d9327b34 CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.
It was only used by this one SGI platform which recently was converted to
RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:35 +00:00
Ralf Baechle
4bdebe5b4a CHAR: Delete old and now unused DS1286 driver.
It was only used by two SGI platforms which recently were converted to
RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30 14:44:35 +00:00
Ralf Baechle
cea7e2dfde MIPS: Sort out CPU type to name translation.
As noticed by David Daney <ddaney@caviumnetworks.com>, the old long switch
statement did not comply with the Linux C coding style.  It was also yet
another place of code to be changed when adding a new processor type
leading to annoying bugs for example in /proc/cpuinfo.

Fixed by moving the setting of the CPU type string into the core of the
probing code and a few BUG_ON() test to ensure the CPU probing code indeed
did its job and removing multiple now redundant tests.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:34 +00:00
Harvey Harrison
255a12fbf9 MIPS: Use the new byteorder headers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:34 +00:00
Ralf Baechle
558ce12494 MIPS: Probe for watch registers on cores of all vendors, not just MTI.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
2008-10-30 14:44:34 +00:00
Ralf Baechle
ba3049ed40 MIPS: Switch FPU emulator trap to BREAK instruction.
Arguably using the address error handler has always been ugly.  But with
processors that handle unaligned loads and stores in hardware the
current mechanism ceases to work so switch it to a BREAK instruction and
allocate break code 514 to the FPU emulator.

Yoichi Yuasa provided a build fix for CONFIG_BUG=n.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30 14:44:34 +00:00
Ralf Baechle
076c6e4f4d MIPS: SMP: Do not initialize __cpu_number_map/__cpu_logical_map for CPU 0.
A system isn't necessarily booted on physical processor 0 as this code
assumes.  Also the array happens to be allocated in .bss so it's zero
initialized anyway.  Systems which need to override this can do so in
their mp_ops->smp_setup() method.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
David Daney
566f74f6b2 MIPS: Consider value of c0_ebase when computing value of exception base.
It just so happens to be zero on all currently supported systems so this
hasn't bitten yet ...

[Ralf: Original patch from Cavium; handling of set_uncached_handler() and
de-ifdef'ed trap_init() implementation by me.]

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
Ralf Baechle
4816227b54 MIPS: Clean up MIPSxx-optimized bitop functions
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
Ralf Baechle
c46b302b94 MIPS: New feature test macro cpu_has_mips_r
cpu_has_mips_r is true if a processor is MIPS32 or MIPS64, any architecture
revision.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
Atsushi Nemoto
864cbf804d MIPS: RBTX4927: Add GPIO-LED support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
Atsushi Nemoto
9cc4581528 MIPS: TXx9: Fix RBTX4939 ethernet address initialization
Fix location of ethernet adddress when booted from external ROM.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30 14:44:33 +00:00
Zhang Le
3a63913f60 MIPS: lemote/lm2e: Added io_map_base to pci controller
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:31 +00:00
Geert Uytterhoeven
97b0511ce1 MIPS: TXx9: Make firmware parameter passing more robust
When booting Linux on a txx9 board with VxWorks boot loader, it crashes in
prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my
case, the actual leftover values in these registers were 0x80002000,
0x80001fe0, 0x2000, and 0x20).

Make the parsing of argc, argv, and envp a bit more robust by checking if
argc is a number below CKSEG0, and argv/envp point to CKSEG0.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:31 +00:00
Shinya Kuribayashi
d1a8e2a6da MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:31 +00:00
Shinya Kuribayashi
49618d652b MIPS: Markeins: Extract ll_emma2rh_* functions
These functions are completely ineffective.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:31 +00:00
Shinya Kuribayashi
a9c2aa17a8 MIPS: Markeins: Remove runtime debug prints
Remove runtime db_* macros as we don't need them any more.  In general,
such helpers are useful for initial porting, but once approved, they are
not indispensable.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
9ae9fd79af MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.c
Current EMMA2RH irq code is mess.  Before cleaning it up, gather them
in one place as a first step.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
fcb3cfe7f0 MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base
Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
68ed1ca912 MIPS: EMMA2RH: Remove emma2rh_sw_irq_base
Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
9b6c04bc97 MIPS: EMMA2RH: Remove emma2rh_irq_base global variable
Let's use immediate value, instead.  This also saves memory footprint,
and probably a little bit faster.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
27bd804582 MIPS: EMMA2RH: Remove emma2rh_sync on read operation
It's totally a waste of CPU cycles.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:30 +00:00
Shinya Kuribayashi
d91f2cbe69 MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dir
We'll put all EMMA related headers there in the future.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
f27655e341 MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/
git mv arch/mips/{emma2rh,emma} and fixups Makefiles.  We'll put all NEC
EMMA series based machines there in the future.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
cd741b604b MIPS: EMMA: Kconfig reorganization
- Move EMMA related stuff into arch/mips/emma/Kconfig
- Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively
- Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
542c1020ac MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
We already have sufficient infrastructure to support VR5500 and VR5500A
series processors.  Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Markeins board.

This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Phil Sutter
bc4c4e832a MIPS: RB532: Disable the right device
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Daniel Laird
edb6310aaa MIPS: Add support for NXP PNX833x (STB222/5) into linux kernel
The following patch add support for the NXP PNX833x SOC.  More
specifically it adds support for the STB222/5 variant. It fixes
the vectored interrupt issue.

Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Geert Uytterhoeven
537fa37c86 MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spelling
Fix a typo in the comment for the TOSHIBA_RBTX4939 config option

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:28 +00:00
Yoichi Yuasa
f6a3176a18 MIPS: Fix KGDB build error
In file included from include/linux/ptrace.h:49,
                 from arch/mips/kernel/kgdb.c:25:
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32'
/home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32'
make[1]: *** [arch/mips/kernel/kgdb.o] Error 1

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:28 +00:00
Ralf Baechle
2f123e503d MIPS: IP22: ip22-int.c header file weeding.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:28 +00:00
Dmitri Vorobiev
14823ccbf8 MIPS: IP22: Small cleanups
The following functions

disable_local1_irq()
disable_local2_irq()
disable_local3_irq()

are needlessly defined global, so make them static. While at it, fix a
whitespace error in the same file.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:28 +00:00
Atsushi Nemoto
1ba5a17674 MIPS: RBTX4939: Add smc91x support
Add smc91x platform device to RBTX4939 board and some hacks for big endian.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:27 +00:00
Atsushi Nemoto
bc89b2bdef MIPS: TXx9: 7 segment LED support
Add sysfs interface for 7 segment LED and implement access routine for
RBTX4939.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:27 +00:00
Manuel Lauss
f591eb1e68 MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.
Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD
controllers for them.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:27 +00:00
Florian Fainelli
fa36b04386 MIPS: RB532: Set gpio interrupt status and level for CompactFlash
This patch sets the correct interrupt status and level
in order to get the CompactFlash adapter working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
Adrian Bunk
052ac71c4b MIPS: RB532: Fix build error
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h>

This patch fixes the following compile error caused by
commit 606a083b1e
(MIPS: RB532: Cleanup the headers again):

<--  snip  -->

...
  CC      arch/mips/pci/fixup-rc32434.o
arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq':
arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function)
arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once
arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.)
make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1

<--  snip  -->

A virtually identical patch was also submitted by Yoichi Yuasa
<yoichi_yuasa@tripeaks.co.jp>.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
David Daney
c944013518 MIPS: Fix KGDB build error
<asm/ptrace.h> is exported to userland so can't include <linux/ptrace.h>,
so replace the C99 types with their basic C type equivalents.

Bug originally reported and initial patch by Yoichi Yuasa
<yoichi_yuasa@tripeaks.co.jp>.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
Atsushi Nemoto
fb498e2570 MIPS: Set ENOSYS to errno on illegal system call number for syscall(2)
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
Atsushi Nemoto
bda8229bdd MIPS: Set positive error number to errno on illegal_syscall
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
Ralf Baechle
7920c4d658 MIPS: SMP: Don't reenable interrupts in stop_this_cpu; use WAIT instruction.
Noticed by Anirban Sinha <ASinha@zeugmasystems.com>; patch by me.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:26 +00:00
David Daney
f67ae98352 MIPS: Don't unmap the memory for dma_sync*.
We were getting away with this for so long only because the only platform
with a non-empty plat_unmap_dma_mem() doesn't call dma_sync_sg_for_cpu()
and dma_sync_sg_for_device() from its commonly used drivers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:25 +00:00
Zhaolei
b517531ce5 MIPS: Fix debugfs_create_*'s error checking method for mips/kernel/
debugfs_create_*() returns NULL on error.  Make its callers return -ENODEV
on error.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:25 +00:00
Zhaolei
ecab1f4479 MIPS: Fix debugfs_create_*'s error checking method for arch/mips/math-emu/
debugfs_create_*() returns NULL on error.  Make its caller debugfs_fpuemu
return -ENODEV on error.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:25 +00:00
Atsushi Nemoto
5d1d2f8c26 TXx9: Add TX4938 ATA support (v3)
Add a helper routine to register tx4938ide driver and use it on
RBTX4938 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:08 +02:00
Linus Torvalds
92fb83afd6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits)
  OProfile: Fix buffer synchronization for IBS
  oprofile: hotplug cpu fix
  oprofile: fixing whitespaces in arch/x86/oprofile/*
  oprofile: fixing whitespaces in arch/x86/oprofile/*
  oprofile: fixing whitespaces in drivers/oprofile/*
  x86/oprofile: add the logic for enabling additional IBS bits
  x86/oprofile: reordering functions in nmi_int.c
  x86/oprofile: removing unused function parameter in add_ibs_begin()
  oprofile: more whitespace fixes
  oprofile: whitespace fixes
  OProfile: Rename IBS sysfs dir into "ibs_op"
  OProfile: Rework string handling in setup_ibs_files()
  OProfile: Rework oprofile_add_ibs_sample() function
  oprofile: discover counters for op ppro too
  oprofile: Implement Intel architectural perfmon support
  oprofile: Don't report Nehalem as core_2
  oprofile: drop const in num counters field
  Revert "Oprofile Multiplexing Patch"
  x86, oprofile: BUG: using smp_processor_id() in preemptible code
  x86/oprofile: fix on_each_cpu build error
  ...

Manually fixed trivial conflicts in
	drivers/oprofile/{cpu_buffer.c,event_buffer.h}
2008-10-23 10:05:40 -07:00
Adrian Bunk
02112dbc92 mips: use bcd2bin/bin2bcd
Changes mips to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Matt Helsley
dc52ddc0e6 container freezer: implement freezer cgroup subsystem
This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:34 -07:00
Linus Torvalds
c813b4e16e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
  UIO: Fix mapping of logical and virtual memory
  UIO: add automata sercos3 pci card support
  UIO: Change driver name of uio_pdrv
  UIO: Add alignment warnings for uio-mem
  Driver core: add bus_sort_breadthfirst() function
  NET: convert the phy_device file to use bus_find_device_by_name
  kobject: Cleanup kobject_rename and !CONFIG_SYSFS
  kobject: Fix kobject_rename and !CONFIG_SYSFS
  sysfs: Make dir and name args to sysfs_notify() const
  platform: add new device registration helper
  sysfs: use ilookup5() instead of ilookup5_nowait()
  PNP: create device attributes via default device attributes
  Driver core: make bus_find_device_by_name() more robust
  usb: turn dev_warn+WARN_ON combos into dev_WARN
  debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
  debug: Introduce a dev_WARN() function
  sysfs: fix deadlock
  device model: Do a quickcheck for driver binding before doing an expensive check
  Driver core: Fix cleanup in device_create_vargs().
  Driver core: Clarify device cleanup.
  ...
2008-10-16 12:40:26 -07:00
Linus Torvalds
e4856a70cf Merge branch 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
2008-10-16 12:32:52 -07:00
Alexey Dobriyan
f221e726bf sysctl: simplify ->strategy
name and nlen parameters passed to ->strategy hook are unused, remove
them.  In general ->strategy hook should know what it's doing, and don't
do something tricky for which, say, pointer to original userspace array
may be needed (name).

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ]
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:47 -07:00
Christoph Hellwig
b418da16dd compat: generic compat get/settimeofday
Nothing arch specific in get/settimeofday.  The details of the timeval
conversion varied a little from arch to arch, but all with the same
results.

Also add an extern declaration for sys_tz to linux/time.h because externs
in .c files are fowned upon.  I'll kill the externs in various other files
in a sparate patch.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Christoph Hellwig
f7a5000f7a compat: move cp_compat_stat to common code
struct stat / compat_stat is the same on all architectures, so
cp_compat_stat should be, too.

Turns out it is, except that various architectures have slightly and some
high2lowuid/high2lowgid or the direct assignment instead of the
SET_UID/SET_GID that expands to the correct one anyway.

This patch replaces the arch-specific cp_compat_stat implementations with
a common one based on the x86-64 one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Greg Kroah-Hartman
a9b12619f7 device create: misc: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:43 -07:00
Martin Schwidefsky
0b59268285 [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
The SET_PERSONALITY macro is always called with a second argument of 0.
Remove the ibcs argument and the various tests to set the PER_SVR4
personality.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16 15:40:05 +02:00
Robert Richter
25ad2913ca oprofile: more whitespace fixes
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15 20:55:51 +02:00
Shinya Kuribayashi
08da6f1bdd MIPS: Kill unused <asm/debug.h> inclusions
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:52 +01:00
Thomas Bogendoerfer
656e9503ba MIPS: IP32: Add platform device for CMOS RTC; remove dead code
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:52 +01:00
Thomas Bogendoerfer
3ec066cdb7 MIPS: IP27: Switch over to RTC class driver
This patchset removes some dead code and creates a platform device
for the RTC class driver.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Thomas Bogendoerfer
7d81a5e03d MIPS: IP22/28: Switch over to RTC class driver
This patchset removes some dead code and creates a platform device
for the RTC class driver.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Aurelien Jarno
540799e32e MIPS: PCI: Scan busses when they are registered
The patch below changes register_pci_controller() such that controllers
being added after pcibios_init() has run are be scanned immediately.

This is needed for example by the BCM47xx PCI controller, which is located
on the SSB bus, which is now initialized after the PCI subsystem.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Aurelien Jarno
89f8c04a49 MIPS: WGT634U: Add reset button support
This patch adds support for the reset button of WGT634U machine, using
GPIO interrupts. Based on a patch from Michel Lespinasse.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:51 +01:00
Aurelien Jarno
b06f3e19a6 MIPS: BCM47xx: Use the new SSB GPIO API
This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO
API, which does a lot things that were implemented directly in the
BCM47xx code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Aurelien Jarno
d412283cef MIPS: BCM47xx: Remove references to BCM947XX
This patch removes the remaining reference to the BCM947xx development
board codename.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Aurelien Jarno
91a385b8f2 MIPS: WGT634U: Add machine detection message
This adds a printk message when a WGT634U machine is detected.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
David Daney
2dbac10263 MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFT
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Johannes Dickgreber
e47c659b55 MIPS: show_cpuinfo prints the type of the calling CPU
It should print the type of the Nth processor.

Signed-off-by: Johannes Dickgreber <tanzy@gmx.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Johannes Dickgreber
9b8f3863d9 MIPS: Fix wrong branch target in new spin_lock code.
Signed-off-by: Johannes Dickgreber <tanzy@gmx.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:50 +01:00
Ralf Baechle
201c72a379 MIPS: Have a heart for a lonely, lost header file ...
... and move it to where all its brothers and sisters reside.  Requested by
Shane McDonald <mcdonald.shane@gmail.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-15 12:46:49 +01:00
Bartlomiej Zolnierkiewicz
cf4049103b ide-generic: remove no longer needed ide_probe_legacy()
There is now a generic solution [ide_generic_check_pci_legacy_iobases()]
so MIPS-specific ide_probe_legacy() is no longer necessary.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:42 +02:00
David Woodhouse
e758936e02 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-x86/statfs.h
2008-10-13 17:13:56 +01:00
Florian Fainelli
9609e74093 MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
This patchs defines the number of built-in the GPIOs present
on the SoC as Documentation/gpio.txt recommends to do.
Define irq_to_gpio/gpio_to_irq to return the right values so that
it fixes a compilation error on drivers/gpio/gpiolib.c
when enabling debugfs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:57 +01:00
Ralf Baechle
d302d05cf4 MIPS: Move ptrace prototypes to ptrace.h
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:57 +01:00
David Daney
0926bf953e MIPS: Ptrace support for HARDWARE_WATCHPOINTS
This is the final part of the watch register patch.  Here we hook up
ptrace so that the user space debugger (gdb), can set and read the
registers.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:57 +01:00
David Daney
2c708cbaa6 MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
Here we hook up the scheduler.  Whenever we switch to a new process,
we check to see if the watch registers should be installed, and do it
if needed.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:57 +01:00
David Daney
b67b2b7030 MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
Here we hook up the watch exception handler so that it sends SIGTRAP when
the hardware watch registers are triggered.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:56 +01:00
David Daney
654f57bfb4 MIPS: Probe watch registers and report configuration.
Probe for watch register characteristics, and report them in /proc/cpuinfo.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:56 +01:00
David Daney
6aa3524c18 MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c
2008-10-11 16:18:56 +01:00
David Daney
8192c9ea9a MIPS: Add HARDWARE_WATCHPOINTS configure option.
This is automatically set for all MIPS32 and MIPS64 processors.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:55 +01:00
Ralf Baechle
71ec6ccfdc MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:54 +01:00
Atsushi Nemoto
4bacc68766 MIPS: TXx9: Add TX4939 ATA support (v2)
Add a helper routine to register tx4939ide driver and use it on
RBTX4939 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:54 +01:00
Ralf Baechle
2a31b03335 MIPS: Rewrite spinlocks to ticket locks.
Based on patch by Chad Reese of Cavium Networks.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:54 +01:00
Ralf Baechle
b65a75b8c9 MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:53 +01:00
Ralf Baechle
60724ca59e MIPS: IP checksums: Remove unncessary .set pseudos
They possibly silence meaningful warnings ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:53 +01:00
Ralf Baechle
d86a8123b1 MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:53 +01:00
Ralf Baechle
384740dc49 MIPS: Move headfiles to new location below arch/mips/include
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:52 +01:00
Ralf Baechle
e8c7c48234 MIPS: Alchemy: rename directory
It's more than the au1000 these days.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:50 +01:00
Atsushi Nemoto
b6263ff2d6 MIPS: TXx9: Implement prom_free_prom_memory
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:49 +01:00
Atsushi Nemoto
b27311e1ca MIPS: TXx9: Add RBTX4939 board support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/rbtx4939/Makefile
 create mode 100644 arch/mips/txx9/rbtx4939/irq.c
 create mode 100644 arch/mips/txx9/rbtx4939/prom.c
 create mode 100644 arch/mips/txx9/rbtx4939/setup.c
 create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11 16:18:49 +01:00
Atsushi Nemoto
0dcdbe6add MIPS: TXx9: Add TX4939 SoC support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/pci/pci-tx4939.c
 create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
 create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
 create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11 16:18:49 +01:00
Atsushi Nemoto
ae027ead87 MIPS: TXx9: IOC LED support
Add leds-gpio platform device for controlling LEDs connected to IOC on
RBTX49XX and JMR3927 board.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:49 +01:00
Atsushi Nemoto
21e77df215 MIPS: TXx9: Microoptimize interrupt handlers
The IOC interrupt status register on RBTX49XX only have 8 bits.  Use
8-bit version of __fls() to optimize interrupt handlers.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:47 +01:00
Atsushi Nemoto
f6d9831bb1 MIPS: TXx9: stop_unused_modules
TXx9 SoCs have pin multiplex.  Stop some controller modules which can
not be used due to pin configurations.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:47 +01:00
Florian Fainelli
d888e25b8d MIPS: RB532: Convert to GPIO lib
This patch converts the rb532 code to use gpio library
and register its gpio chip.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:47 +01:00
Florian Fainelli
606a083b1e MIPS: RB532: Cleanup the headers again
This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:46 +01:00
Florian Fainelli
deeb45ac4a MIPS: RB532: Remove obsolute reference to setup_serial_port
We are no longer using setup_serial_port. So just remove it
from the prom code.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:46 +01:00
Florian Fainelli
b6e2f58a50 MIPS: RB532: Fix id usage in platform devices
When there is only platform device of the same type, id = -1
should be used, fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:46 +01:00
Florian Fainelli
c76befc342 MIPS: RB532: replace raw volatile read with a readl
This patch replaces a raw read using volatiles
with a readl.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:45 +01:00
Florian Fainelli
49afa0a151 MIPS: RB532: Remove gpio bootup state
We are no longer using gpio bootup state, so do not export
it and do not parse the kernel command line tag for it.
Instead we provide gpio-keys for the button the gpio bootup
state was checking.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:45 +01:00
Florian Fainelli
3c8cf8caa5 MIPS: RB532: Use physical addresses for gpio and device controller registers
This patch fixes the misuse of virtual addresses for the GPIO and third
device controller which would lead to problems while accessing ioremap'd
registers.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:45 +01:00
Florian Fainelli
3cd4e067a3 MIPS: RB532: Cleanup and group definitions to their right places
This patch moves GPIO related definitions to gpio.h and IRQ
related to irq.h

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:44 +01:00
Atsushi Nemoto
ee25d33f87 MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:44 +01:00
Atsushi Nemoto
ce8e74112b MIPS: TXx9: Add board_be_init for TX4927/TX4938
Setup default board_be_handler for TX4927/TX4938.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:44 +01:00
Atsushi Nemoto
496a3b5c2c MIPS: TXx9: Default machine_restart using watchdog reset
Add default machine_restart routine using watchdog reset of TX4927 and
TX4938.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:44 +01:00
Atsushi Nemoto
d75a40e90e MIPS: TXx9: Make spi_eeprom.c more generic
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific.
Move it to txx9/generic/ directory and make it works with SPI bus
number other than 0.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/generic/spi_eeprom.c
 delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11 16:18:44 +01:00
Atsushi Nemoto
e633237477 MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware.
Also replace some printk with pr_info.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:43 +01:00
Atsushi Nemoto
7489436349 MIPS: TXx9: Raise priority of interrupts for errors, timers, SIO
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:43 +01:00
Atsushi Nemoto
51f607c76e MIPS: TXx9: Add mtd support
Add helper routines to register physmap-flash platform devices for NOR
flashes.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:42 +01:00
Atsushi Nemoto
c7b95bcb38 MIPS: TXx9: Runtime configuration of timeout-error
Add kernel options to control bus timeout error.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:42 +01:00
Atsushi Nemoto
d10e025f0e MIPS: TXx9: Cache fixup
TX39/TX49 can enable/disable I/D cache at runtime.  Add kernel options
to control them.  This is useful to debug some cache-related issues,
such as aliasing or I/D coherency.  Also enable CWF bit for TX49 SoCs.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:42 +01:00
Atsushi Nemoto
860e546c19 MIPS: TXx9: Early command-line preprocessing
* Select board by command-line option or firmware environment variable.
* Handle "masterclk=" option.
* Add boards.h to centerize board_vec declaration.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11 16:18:42 +01:00
Atsushi Nemoto
265b89db10 MIPS: TXx9: Add prom_getenv
Add prom_getenv() which can be used for YAMON.  This assumes other
firmware should pass NULL for fw_arg2.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:42 +01:00
Atsushi Nemoto
e0dfb20c2b MIPS: TXx9: Improve handling of built-in and command-line args
* Make prom_init_cmdline() static and be called from prom_init.
* Append built-in args if the first character was '+'.
* Drop command-line args if the first character of built-in was '-'.
* Enclose args include spaces by quotes.
* TX4938_NAND_BOOT is no longer needed.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:41 +01:00
Atsushi Nemoto
f96a3383cf MIPS: RBTX4927: More explicit initialization
* Make sure all interrupts cleared on startup
* Initialize some GPIOs

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:41 +01:00
Patrick Glass
9fa32c6b02 MIPS: PMC MSP71XX gpio drivers
This new gpio driver for PMC-Sierra's MSP71xx SoC allows
standard api calls for access to the general and extended
gpio's.

Signed-off-by: Patrick Glass <patrickglass@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c
 create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c
 create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
2008-10-11 16:18:41 +01:00
Thomas Bogendoerfer
5d9a76cd0e MIPS: Use compat_sys_ptrace
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and
enables the new generic definition of compat_sys_ptrace instead.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:41 +01:00
Linus Torvalds
b11ce8a26d Merge branch 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  sched debug: add name to sched_domain sysctl entries
  sched: sync wakeups vs avg_overlap
  sched: remove redundant code in cpu_cgroup_create()
  sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq
  cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const
  sched: minor optimizations in wake_affine and select_task_rq_fair
  sched: maintain only task entities in cfs_rq->tasks list
  sched: fixup buddy selection
  sched: more sanity checks on the bandwidth settings
  sched: add some comments to the bandwidth code
  sched: fixlet for group load balance
  sched: rework wakeup preemption
  CFS scheduler: documentation about scheduling policies
  sched: clarify ifdef tangle
  sched: fix list traversal to use _rcu variant
  sched: turn off WAKEUP_OVERLAP
  sched: wakeup preempt when small overlap
  kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
  kernel/cpu.c: Move the CPU_DYING notifiers
  sched: fix __load_balance_iterator() for cfq with only one task
  ...
2008-10-10 12:42:31 -07:00
Ralf Baechle
8806048878 [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur
Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-08 19:19:28 +01:00
Ingo Molnar
990d0f2ced Merge branches 'sched/devel', 'sched/cpu-hotplug', 'sched/cpusets' and 'sched/urgent' into sched/core 2008-10-08 11:31:02 +02:00
Linus Torvalds
f1ea725472 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: workaround for bogus gcc warning in ide_sysfs_register_port()
  ide-cd: Optiarc DVD RW AD-7200A does play audio
  IDE: Fix platform device registration in Swarm IDE driver (v2)
  ide-dma: fix ide_build_dmatable() for TRM290
  ide-cd: temporary tray close fix
2008-10-06 14:27:57 -07:00
Ralf Baechle
fd3d2764ee [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-06 01:22:29 +01:00
Ralf Baechle
4a16ff4c69 [MIPS] Fix CMP Kconfig configuration and mark as broken.
Because sync-r4k.c doesn't build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-06 01:22:28 +01:00
Ralf Baechle
2fef357cf3 IDE: Fix platform device registration in Swarm IDE driver (v2)
The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05 18:23:28 +02:00
Kevin D. Kissell
8531a35e5e [MIPS] SMTC: Fix SMTC dyntick support.
Rework of SMTC support to make it work with the new clock event system,
allowing "tickless" operation, and to make it compatible with the use of
the "wait_irqoff" idle loop.  The new clocking scheme means that the
previously optional IPI instant replay mechanism is now required, and has
been made more robust.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03 17:58:58 +01:00
Kevin D. Kissell
d2bb01b042 [MIPS] SMTC: Close tiny holes in the SMTC IPI replay system.
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03 17:58:58 +01:00
Kevin D. Kissell
9cc123631b [MIPS] SMTC: Fix holes in SMTC and FPU affinity support.
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03 17:58:58 +01:00
Ralf Baechle
498a863fdf [MIPS] SMTC: Build fix: Fix filename in Makefile
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03 17:58:57 +01:00
Ralf Baechle
b7e4226e4f [MIPS] Build fix: Fix irq flags type
Though from a hardware perspective it would be sensible to use only a
32-bit unsigned int type Linux defines interrupt flags to be stored in
an unsigned long and nothing else.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03 17:58:56 +01:00
Linus Torvalds
0f873d5fb6 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices
  [MIPS] BCM47xx: Fix build error due to missing PCI functions
  [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error.
  [MIPS] au1000: Make sure GPIO value is zero or one
2008-09-29 08:31:52 -07:00
Aurelien Jarno
2dc42b47a7 [MIPS] BCM47xx: Fix build error due to missing PCI functions
This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for
the BCM47xx platform.

It fixes the regression introduced by commit
aab547ce0d.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:36 +01:00
Ralf Baechle
f4d15f1c87 [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error.
pcibios_map_irq is no way of returning an error but on IP27 an interrupt
is possibly not routable when running out of resources.  So do the
interrupt routing at pcibios_enable_device time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:36 +01:00
Bruno Randolf
19506fc518 [MIPS] au1000: Make sure GPIO value is zero or one
David Brownell <david-b@pacbell.net> wrote:
>       The problem is that "value" is zero-or-nonzero.
>       This code wrongly assumes it's zero-or-one.
>       Possible fix:  "((!!value) << gpio)".

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-27 15:45:35 +01:00
Jason Wessel
d7161a6534 kgdb, x86, arm, mips, powerpc: ignore user space single stepping
On the x86 arch, user space single step exceptions should be ignored
if they occur in the kernel space, such as ptrace stepping through a
system call.

First check if it is kgdb that is executing a single step, then ensure
it is not an accidental traversal into the user space, while in kgdb,
any other time the TIF_SINGLESTEP is set, kgdb should ignore the
exception.

On x86, arm, mips and powerpc, the kgdb_contthread usage was
inconsistent with the way single stepping is implemented in the kgdb
core.  The arch specific stub should always set the
kgdb_cpu_doing_single_step correctly if it is single stepping.  This
allows kgdb to correctly process an instruction steps if ptrace
happens to be requesting an instruction step over a system call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-26 10:36:41 -05:00
Bruno Randolf
44ce17192a [MIPS] au1000: Fix gpio direction
When setting the direction of one GPIO pin we have to keep the state of the
other pins, hence use binary OR. Also gpio_direction_output() wants to set an
initial value, so add that too.

This fixes a problem with the USB power switch on mtx-1 boards.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-24 00:26:54 +02:00
Atsushi Nemoto
6b3766a263 [MIPS] vmlinux.lds.S: handle .text.*
The -ffunction-sections puts each text in .text.function_name section.
Without this patch, most functions are placed outside _text..._etext
area and it breaks show_stacktrace(), etc.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21 14:52:58 +02:00
Atsushi Nemoto
c65a5480ff [MIPS] Fix potential latency problem due to non-atomic cpu_wait.
If an interrupt happened between checking of NEED_RESCHED and WAIT
instruction, adjust EPC to restart from checking of NEED_RESCHED.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21 14:52:57 +02:00
Ralf Baechle
6657fe0a02 [MIPS] SMTC: Clear TIF_FPUBOUND on clone / fork.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21 14:52:57 +02:00
Atsushi Nemoto
b80a1b8081 [MIPS] Fix 64-bit IP checksum code
Use unsigned loads to avoid possible misscalculation of IP checksums.  This
bug was instruced in f761106cd728bcf65b7fe161b10221ee00cf7132 (lmo) /
ed99e2bc1d (kernel.org).

[Original fix by Atsushi.  Improved instruction scheduling and fix for
unaligned unsigned load by me -- Ralf]

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21 14:52:56 +02:00
roel kluin
a83479545d [MIPS] VR41xx: unsigned irq cannot be negative
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-16 11:04:30 +02:00
Manfred Spraul
e545a6140b kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
Right now, there is no notifier that is called on a new cpu, before the new
cpu begins processing interrupts/softirqs.
Various kernel function would need that notification, e.g. kvm works around
by calling smp_call_function_single(), rcu polls cpu_online_map.

The patch adds a CPU_STARTING notification. It also adds a helper function
that sends the message to all cpu_chain handlers.

Tested on x86-64.
All other archs are untested. Especially on sparc, I'm not sure if I got
it right.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 19:25:24 +02:00
Thomas Bogendoerfer
4a911b1efe [MIPS] IP22: Fix detection of second HPC3 on Challenge S
The second HPC3 could be found only on Guiness systems (Challenge-S),
but not on fullhouse (Indigo2) systems.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-08 18:45:39 +02:00
Adrian Bunk
9d5a9e7465 Remove asm/a.out.h files for all architectures without a.out support.
This patch also includes the required removal of (unused) inclusion of
<asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these
architectures.

[dwmw2: updated for 2.6.27-rc]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06 19:30:24 +01:00
Atsushi Nemoto
0011036bee [MIPS] Probe initrd header only if explicitly specified
Currently init_initrd() probes initrd header at the last page of kernel
image, but it is valid only if addinitrd was used.  If addinitrd was not
used, the area contains garbage so probing there might misdetect initrd
header (magic number is not strictly robust).

This patch introduces CONFIG_PROBE_INITRD_HEADER to explicitly enable this
probing.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05 21:24:12 +01:00
Atsushi Nemoto
3885ec8ca2 [MIPS] TX39xx: Add missing local_flush_icache_range initialization
Commmit 59e39ecd933ba49eb6efe84cbfa5597a6c9ef18a ("Fix WARNING: at
kernel/smp.c:290") introduced local_flush_icache_range but lacks
initialization for some TX39 case.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05 21:24:12 +01:00
Atsushi Nemoto
073828d078 [MIPS] TXx9: Fix txx9_pcode initialization
The txx9_pcode variable was introduced in commit
fe1c2bc64f65003b39f331a8e4b0d15b235a4afd ("TXx9: Add 64-bit support")
but was not initialized properly.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05 21:24:12 +01:00
Thomas Bogendoerfer
e0cee3eea7 [MIPS] Fix WARNING: at kernel/smp.c:290
trap_init issues flush_icache_range(), which uses ipi functions to
get icache flushing done on all cpus. But this is done before interrupts
are enabled and caused WARN_ON messages. This changeset introduces
a new local_flush_icache_range() and uses it before interrupts (and
additional CPUs) are enabled to avoid this problem.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05 21:24:11 +01:00
Thomas Bogendoerfer
0510617b85 [MIPS] Fix data bus error recovery
With -ffunction-section the entries in __dbe_table aren't no longer
sorted, so the lookup of exception addresses in do_be() failed for
some addresses. To avoid this we now sort __dbe_table.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-05 21:24:11 +01:00
Florian Fainelli
3e6259c3ef [MIPS] Ignore vmlinux.lds generated files
This patch adds the proper .gitignore file to ignore vmlinux.lds generated
in arch/mips/kernel/.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:27 +01:00
Atsushi Nemoto
b895760dfb [MIPS] kgdb: Do not call fixup_exception
kgdb_mips_notify is called on IBE/DBE/FPE/BP/TRAP/RI exception.  None
of them need fixup.  And doing fixup for a breakpoint exception will
confuse gdb.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:26 +01:00
Florian Fainelli
1ddfe82dc6 [MIPS] RB532: Do not define registers that are already defined
Use the register definitions of the MPMC controller from
mach-rc32434/rb.h instead of redefining them.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:26 +01:00
Ralf Baechle
a571444a06 [MIPS] IP27: Export symbol pcibus_to_node to modules.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:25 +01:00
Ralf Baechle
9391d6bbed [MIPS] kgdb: s/(void *)0)/NULL/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:24 +01:00
Ralf Baechle
e522b7ccd2 [MIPS] kgdb: smp_call_function's 3rd argument is a pointer.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:23 +01:00
Atsushi Nemoto
1374d08473 [MIPS] TXx9: Fix mips_hpt_frequency initialization
The mips_hpt_frequency initialization code was lost in commit
94a4c32939 (linux-mips.org) /
94a4c32939 (kernel.org) "TXx9: Add 64-bit
support".

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:22 +01:00
Ralf Baechle
2841d8b893 [MIPS] emma2rh: Fix build error by header file inclusion weeding.
CC      arch/mips/emma2rh/markeins/setup.o
In file included from arch/mips/emma2rh/markeins/setup.c:30:
include/linux/ide.h:645: error: ‘CONFIG_IDE_MAX_HWIFS’ undeclared here (not in a function)
make[1]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:21 +01:00
Ralf Baechle
89ef3e85de [MIPS] Jazz: Fix build error by header file inclusion weeding.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:20 +01:00
Ralf Baechle
3885b71ba6 [MIPS] Wire up new syscalls.
signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:20 +01:00
Mike Crowe
a64ae7a225 [MIPS] Convert printk statements during kernel setup to use severity levels
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-26 09:10:19 +01:00
Adrian Bunk
0e25f71061 remove unneeded #include <linux/ide.h>'s
This patch remove unneeded #include <linux/ide.h>'s.

It also adds a required #include <linux/interrupt.h> that was previously 
implicitely pulled by ide.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
[bart: revert change to tests/lkdtm.c (spotted by Stephen Rothwell)]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05 18:17:00 +02:00
Bartlomiej Zolnierkiewicz
b5b9309d34 remove unnecessary <linux/hdreg.h> includes
Following files don't need <linux/hdreg.h> at all:

- arch/mips/jazz/setup.c
- arch/sh/boards/mach-systemh/irq.c
- drivers/macintosh/mediabay.c
- drivers/scsi/hptiop.c
- drivers/usb/storage/freecom.c
- arch/powerpc/include/asm/ide.h
- init/main.c

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05 18:16:58 +02:00
Yoichi Yuasa
de1d7bb638 [MIPS] Cobalt: update defconfig
Select new LCD framebuffer driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:43 +01:00