This prevents further parsing of tokens (that'll be freed) inside method
body by propagating EOF emitted by reaching code completion token up the parsing
stack.
Differential Revision: https://reviews.llvm.org/D158269
- Use this new context in Sema to limit completions to seen ObjC class
names
- Use this new context in clangd to disable include insertions when
completing ObjC forward decls
Reviewed By: kadircet
Differential Revision: https://reviews.llvm.org/D150978
This patch adds static functions for constructing most
AttributeCommonInfo::Forms. Direct construction is only retained where
all fields (currently the syntax and spelling) are specified explicitly.
This is a wash on its own. The purpose is to allow extra fields
to be added to Form without disrupting all callers. In particular,
it allows extra information to be stored about keywords without
affecting non-keyword uses.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D148104
Instead of emitting a redefinition error, check that definitions are
equivalent and allow such scenario.
A few non-obvious implementation details:
* to avoid multiple definitions in the redeclaration chain we just drop
the new definition after checking for equivalence;
* for checking definition equivalence use ODR hash instead of
ASTStructuralEquivalence because it avoids excessive recursive
deserialization. Though after detecting a mismatch we do deserialize
multiple entities to provide a better error message.
rdar://82908223
Differential Revision: https://reviews.llvm.org/D124286
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
We would previously reject valid input where GNU attributes preceded the
standard attributes on top-level declarations. A previous attribute
handling change had begun rejecting this whilst GCC does honour this
layout. In practice, this breaks use of `extern "C"` attributed
functions which use both standard and GNU attributes as experienced by
the Swift runtime.
Objective-C deserves an honourable mention for requiring some additional
special casing. Because attributes on declarations and definitions
differ in semantics, we need to replicate some of the logic for
detecting attributes to declarations to which they appertain cannot be
attributed. This should match the existing case for the application of
GNU attributes to interfaces, protocols, and implementations.
Take the opportunity to split out the tooling tests into two cases: ones
which process macros and ones which do not.
Special thanks to Aaron Ballman for the many hints and extensive rubber
ducking that was involved in identifying the various places where we
accidentally dropped attributes.
Differential Revision: https://reviews.llvm.org/D137979Fixes: #58229
Reviewed By: aaron.ballman, arphaman
When during parsing we encountered a duplicate `ObjCProtocolDecl`, we
were always emitting an error. With this change we accept
* when a previous `ObjCProtocolDecl` is in a hidden [sub]module;
* parsed `ObjCProtocolDecl` is the same as the previous one.
And in case of mismatches we provide more detailed error messages.
rdar://93069080
Differential Revision: https://reviews.llvm.org/D130327
For backwards compatiblity, we emit only a warning instead of an error if the
attribute is one of the existing type attributes that we have historically
allowed to "slide" to the `DeclSpec` just as if it had been specified in GNU
syntax. (We will call these "legacy type attributes" below.)
The high-level changes that achieve this are:
- We introduce a new field `Declarator::DeclarationAttrs` (with appropriate
accessors) to store C++11 attributes occurring in the attribute-specifier-seq
at the beginning of a simple-declaration (and other similar declarations).
Previously, these attributes were placed on the `DeclSpec`, which made it
impossible to reconstruct later on whether the attributes had in fact been
placed on the decl-specifier-seq or ahead of the declaration.
- In the parser, we propgate declaration attributes and decl-specifier-seq
attributes separately until we can place them in
`Declarator::DeclarationAttrs` or `DeclSpec::Attrs`, respectively.
- In `ProcessDeclAttributes()`, in addition to processing declarator attributes,
we now also process the attributes from `Declarator::DeclarationAttrs` (except
if they are legacy type attributes).
- In `ConvertDeclSpecToType()`, in addition to processing `DeclSpec` attributes,
we also process any legacy type attributes that occur in
`Declarator::DeclarationAttrs` (and emit a warning).
- We make `ProcessDeclAttribute` emit an error if it sees any non-declaration
attributes in C++11 syntax, except in the following cases:
- If it is being called for attributes on a `DeclSpec` or `DeclaratorChunk`
- If the attribute is a legacy type attribute (in which case we only emit
a warning)
The standard justifies treating attributes at the beginning of a
simple-declaration and attributes after a declarator-id the same. Here are some
relevant parts of the standard:
- The attribute-specifier-seq at the beginning of a simple-declaration
"appertains to each of the entities declared by the declarators of the
init-declarator-list" (https://eel.is/c++draft/dcl.dcl#dcl.pre-3)
- "In the declaration for an entity, attributes appertaining to that entity can
appear at the start of the declaration and after the declarator-id for that
declaration." (https://eel.is/c++draft/dcl.dcl#dcl.pre-note-2)
- "The optional attribute-specifier-seq following a declarator-id appertains to
the entity that is declared."
(https://eel.is/c++draft/dcl.dcl#dcl.meaning.general-1)
The standard contains similar wording to that for a simple-declaration in other
similar types of declarations, for example:
- "The optional attribute-specifier-seq in a parameter-declaration appertains to
the parameter." (https://eel.is/c++draft/dcl.fct#3)
- "The optional attribute-specifier-seq in an exception-declaration appertains
to the parameter of the catch clause" (https://eel.is/c++draft/except.pre#1)
The new behavior is tested both on the newly added type attribute
`annotate_type`, for which we emit errors, and for the legacy type attribute
`address_space` (chosen somewhat randomly from the various legacy type
attributes), for which we emit warnings.
Depends On D111548
Reviewed By: aaron.ballman, rsmith
Differential Revision: https://reviews.llvm.org/D126061
Without the fix ivars with anonymous types can trigger errors like
> error: 'TestClass::structIvar' from module 'Target' is not present in definition of 'TestClass' provided earlier
> [...]
> note: declaration of 'structIvar' does not match
It happens because types of ivars from different modules are considered
to be different. And it is caused by not merging anonymous `TagDecl`
from different modules.
To fix that I've changed `serialization::needsAnonymousDeclarationNumber`
to handle anonymous `TagDecl` inside `ObjCInterfaceDecl`. But that's not
sufficient as C code inside `ObjCInterfaceDecl` doesn't use interface
decl as a decl context but switches to its parent (TranslationUnit in
most cases). I'm changing that to make `ObjCContainerDecl` the lexical
decl context but keeping the semantic decl context intact.
Test "check-dup-decls-inside-objc.m" doesn't reflect a change in
functionality but captures the existing behavior to prevent regressions.
rdar://85563013
Differential Revision: https://reviews.llvm.org/D118525
Move the SourceRange from the old ParsedAttributesWithRange into
ParsedAttributesView, so we have source range information available
everywhere we use attributes.
This also removes ParsedAttributesWithRange (replaced by simply using
ParsedAttributes) and ParsedAttributesVieWithRange (replaced by using
ParsedAttributesView).
Differential Revision: https://reviews.llvm.org/D121201
In C++20 modules imports must be together and at the start of the module.
Rather than growing more ad-hoc flags to test state, this keeps track of the
phase of of a valid module TU (first decl, global module frag, module,
private module frag). If the phasing is broken (with some diagnostic) the
pattern does not conform to a valid C++20 module, and we set the state
accordingly.
We can thus issue diagnostics when imports appear in the wrong places and
decouple the C++20 modules state from other module variants (modules-ts and
clang modules). Additionally, we attempt to diagnose wrong imports before
trying to find the module where possible (the latter will generally emit an
unhelpful diagnostic about the module not being available).
Although this generally simplifies the handling of C++20 module import
diagnostics, the motivation was that, in particular, it allows detecting
invalid imports like:
import module A;
int some_decl();
import module B;
where being in a module purview is insufficient to identify them.
Differential Revision: https://reviews.llvm.org/D118893
In C++20 modules imports must be together and at the start of the module.
Rather than growing more ad-hoc flags to test state, this keeps track of the
phase of of a valid module TU (first decl, global module frag, module,
private module frag). If the phasing is broken (with some diagnostic) the
pattern does not conform to a valid C++20 module, and we set the state
accordingly.
We can thus issue diagnostics when imports appear in the wrong places and
decouple the C++20 modules state from other module variants (modules-ts and
clang modules). Additionally, we attempt to diagnose wrong imports before
trying to find the module where possible (the latter will generally emit an
unhelpful diagnostic about the module not being available).
Although this generally simplifies the handling of C++20 module import
diagnostics, the motivation was that, in particular, it allows detecting
invalid imports like:
import module A;
int some_decl();
import module B;
where being in a module purview is insufficient to identify them.
Differential Revision: https://reviews.llvm.org/D118893
Somewhat surprisingly, signature help is emitted as a side-effect of
computing the expected type of a function argument.
The reason is that both actions require enumerating the possible
function signatures and running partial overload resolution, and doing
this twice would be wasteful and complicated.
Change #1: document this, it's subtle :-)
However, sometimes we need to compute the expected type without having
reached the code completion cursor yet - in particular to allow
completion of designators.
eb4ab3358cd4dc834a761191b5531b38114f7b13 did this but introduced a
regression - it emits signature help in the wrong location as a side-effect.
Change #2: only emit signature help if the code completion cursor was reached.
Currently there is PP.isCodeCompletionReached(), but we can't use it
because it's set *after* running code completion.
It'd be nice to set this implicitly when the completion token is lexed,
but ConsumeCodeCompletionToken() makes this complicated.
Change #3: call cutOffParsing() *first* when seeing a completion token.
After this, the fact that the Sema::Produce*SignatureHelp() functions
are even more confusing, as they only sometimes do that.
I don't want to rename them in this patch as it's another large
mechanical change, but we should soon.
Change #4: prepare to rename ProduceSignatureHelp() to GuessArgumentType() etc.
Differential Revision: https://reviews.llvm.org/D98488
In Clang today, we parse the different attribute syntaxes
(__attribute__, __declspec, and [[]]) in a fairly rigid order. This
leads to confusion for users when they guess the order incorrectly,
and leads to bug reports like PR24559 or necessitates changes like
D94788.
This patch adds a helper function to allow us to more easily parse
attributes in arbitrary order, and then updates all of the places
where we would parse two or more different syntaxes in a rigid order to
use the helper method. The patch does not attempt to handle Microsoft
attributes ([]) because those are ambiguous with other code constructs
and we don't have any attributes that use the syntax.
Since these are scoped enumerators, they have to be prefixed by DeclaratorContext, so lets remove Context from the name, and return some characters to the multiverse.
Patch was reviewed here: https://reviews.llvm.org/D91011
Thank you to aaron, bruno, wyatt and barry for indulging me.
This is a code clean up of the PropertyAttributeKind and
ObjCPropertyAttributeKind enums in ObjCPropertyDecl and ObjCDeclSpec that are
exactly identical. This non-functional change consolidates these enums
into one. The changes are to many files across clang (and comments in LLVM) so
that everything refers to the new consolidated enum in DeclObjCCommon.h.
2nd Landing Attempt...
Differential Revision: https://reviews.llvm.org/D77233
This is a code clean up of the PropertyAttributeKind and
ObjCPropertyAttributeKind enums in ObjCPropertyDecl and ObjCDeclSpec that are
exactly identical. This non-functional change consolidates these enums
into one. The changes are to many files across clang (and comments in LLVM) so
that everything refers to the new consolidated enum in DeclObjCCommon.h.
Differential Revision: https://reviews.llvm.org/D77233
__attribute__((objc_direct)) is an attribute on methods declaration, and
__attribute__((objc_direct_members)) on implementation, categories or
extensions.
A `direct` property specifier is added (@property(direct) type name)
These attributes / specifiers cause the method to have no associated
Objective-C metadata (for the property or the method itself), and the
calling convention to be a direct C function call.
The symbol for the method has enforced hidden visibility and such direct
calls are hence unreachable cross image. An explicit C function must be
made if so desired to wrap them.
The implicit `self` and `_cmd` arguments are preserved, however to
maintain compatibility with the usual `objc_msgSend` semantics,
3 fundamental precautions are taken:
1) for instance methods, `self` is nil-checked. On arm64 backends this
typically adds a single instruction (cbz x0, <closest-ret>) to the
codegen, for the vast majority of the cases when the return type is a
scalar.
2) for class methods, because the class may not be realized/initialized
yet, a call to `[self self]` is emitted. When the proper deployment
target is used, this is optimized to `objc_opt_self(self)`.
However, long term we might want to emit something better that the
optimizer can reason about. When inlining kicks in, these calls
aren't optimized away as the optimizer has no idea that a single call
is really necessary.
3) the calling convention for the `_cmd` argument is changed: the caller
leaves the second argument to the call undefined, and the selector is
loaded inside the body when it's referenced only.
As far as error reporting goes, the compiler refuses:
- making any overloads direct,
- making an overload of a direct method,
- implementations marked as direct when the declaration in the
interface isn't (the other way around is allowed, as the direct
attribute is inherited from the declaration),
- marking methods required for protocol conformance as direct,
- messaging an unqualified `id` with a direct method,
- forming any @selector() expression with only direct selectors.
As warnings:
- any inconsistency of direct-related calling convention when
@selector() or messaging is used,
- forming any @selector() expression with a possibly direct selector.
Lastly an `objc_direct_members` attribute is added that can decorate
`@implementation` blocks and causes methods only declared there (and in
no `@interface`) to be automatically direct. When decorating an
`@interface` then all methods and properties declared in this block are
marked direct.
Radar-ID: rdar://problem/2684889
Differential Revision: https://reviews.llvm.org/D69991
Reviewed-By: John McCall
If the type didn't exist, we used to emit a really bad error:
t.m:3:12: error: expected ')'
-(nullable NoSuchType)foo3;
^
rdar://50925632
llvm-svn: 364489
Summary:
By adding a hook to consume all tokens produced by the preprocessor.
The intention of this change is to make it possible to consume the
expanded tokens without re-runnig the preprocessor with minimal changes
to the preprocessor and minimal performance penalty when preprocessing
without recording the tokens.
The added hook is very low-level and reconstructing the expanded token
stream requires more work in the client code, the actual algorithm to
collect the tokens using this hook can be found in the follow-up change.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: eraman, nemanjai, kbarton, jsji, riccibruno, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D59885
llvm-svn: 361007
We want to make objc_nonlazy_class apply to implementations, but ran into this.
There doesn't seem to be any reason that this isn't supported.
Differential revision: https://reviews.llvm.org/D60542
llvm-svn: 358200
This adds support for static_assert() (and _Static_assert()) in
@interface/@implementation ivar lists and in @interface method declarations.
It was already supported in @implementation blocks outside of the ivar lists.
The assert AST nodes are added at file scope, matching where other
(non-Objective-C) declarations at @interface / @implementation level go (cf
`allTUVariables`).
Also add a `__has_feature(objc_c_static_assert)` that's true in C11 (and
`__has_extension(objc_c_static_assert)` that's always true) and
`__has_feature(objc_cxx_static_assert)` that's true in C++11 modea fter this
patch, so it's possible to check if this is supported.
Differential Revision: https://reviews.llvm.org/D59223
llvm-svn: 356148
expression is a discarded-value expression.
Summary:
We used to get this wrong in three ways:
1) During parsing, an expression-statement followed by the }) ending a
statement expression was always treated as producing the value of the
statement expression. That's wrong for ({ if (1) expr; })
2) During template instantiation, various kinds of statement (most
statements not appearing directly in a compound-statement) were not
treated as discarded-value expressions, resulting in missing volatile
loads (etc).
3) In all contexts, an expression-statement with attributes was not
treated as producing the value of the statement expression, eg
({ [[attr]] expr; }).
Also fix incorrect enforcement of OpenMP rule that directives can "only
be placed in the program at a position where ignoring or deleting the
directive would result in a program with correct syntax". In particular,
a label (be it goto, case, or default) should not affect whether
directives are permitted.
Reviewers: aaron.ballman, rjmccall
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57984
llvm-svn: 354090
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Rather than sprinkle calls to DiagnoseUnusedExprResult() around in places where we want diagnostics, we now diagnose unused expression statements and full expressions in a more generic way when acting on the final expression statement. This results in more appropriate diagnostics for [[nodiscard]] where we were previously lacking them, such as when the body of a for loop is not a compound statement.
This patch fixes PR39837.
llvm-svn: 350404
We haven't supported compiling ObjC1 for a long time (and never will again), so
there isn't any reason to keep these separate. This patch replaces
LangOpts::ObjC1 and LangOpts::ObjC2 with LangOpts::ObjC.
Differential revision: https://reviews.llvm.org/D53547
llvm-svn: 345637
Recommit of r335084 after revert in r335516.
... instead of prepending it at the beginning (the original behavior
since implemented in r122535 2010-12-23). This builds up an
AttributeList in the the order in which the attributes appear in the
source.
The reverse order caused nodes for attributes in the AST (e.g. LoopHint)
to be in the reverse order, and therefore printed in the wrong order in
-ast-dump. Some TODO comments mention this. The order was explicitly
reversed for enable_if attribute overload resolution and name mangling,
which is not necessary anymore with this patch.
The change unfortunately has some secondary effect, especially on
diagnostic output. In the simplest cases, the CHECK lines or expected
diagnostic were changed to the the new output. If the kind of
error/warning changed, the attributes' order was changed instead.
This unfortunately causes some 'previous occurrence here' hints to be
textually after the main marker. This typically happens when attributes
are merged, but are incompatible to each other. Interchanging the role
of the the main and note SourceLocation will also cause the case where
two different declaration's attributes (in contrast to multiple
attributes of the same declaration) are merged to be reverse. There is
no easy fix because sometimes previous attributes are merged into a new
declaration's attribute list, sometimes new attributes are added to a
previous declaration's attribute list. Since 'previous occurrence here'
pointing to locations after the main marker is not rare, I left the
markers as-is; it is only relevant when the attributes are declared in
the same declaration anyway.
Differential Revision: https://reviews.llvm.org/D48100
llvm-svn: 338800
Basically, "AttributeList" loses all list-like mechanisms, ParsedAttributes is
switched to use a TinyPtrVector (and a ParsedAttributesView is created to
have a non-allocating attributes list). DeclaratorChunk gets the later kind,
Declarator/DeclSpec keep ParsedAttributes.
Iterators are added to the ParsedAttribute types so that for-loops work.
llvm-svn: 336945
Existing code always allocates for on the declarator's attribute pool,
but sometimes adds it to the declspec. This patch ensures that the
correct pool is used.
Discovered while testing: https://reviews.llvm.org/D48788
llvm-svn: 336225
This reapplies r334224 and adds explicit triples to some tests to fix
them on Windows (where otherwise they would have run with the default
windows-msvc triple, which I'm changing the behavior for).
Original commit message:
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Differential Revision: https://reviews.llvm.org/D47564
llvm-svn: 334251
This reverts commit r334224.
This is causing buildbot failures on Windows, presumably because some
tests don't specify a triple. I'll test this on Windows locally and
recommit with the tests fixed.
llvm-svn: 334240
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Differential Revision: https://reviews.llvm.org/D47564
llvm-svn: 334224
This is similar to the LLVM change https://reviews.llvm.org/D46290.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46320
llvm-svn: 331834
This patch is a tweak of changyu's patch: https://reviews.llvm.org/D40381. It differs in that the recognition of the 'concept' token is moved into the machinery that recognizes declaration-specifiers - this allows us to leverage the attribute handling machinery more seamlessly.
See the test file to get a sense of the basic parsing that this patch supports.
There is much more work to be done before concepts are usable...
Thanks Changyu!
llvm-svn: 330794
