The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
This prinviple also applies to Written values. Add a test for this
principle.
llvm-svn: 301481
The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
Add a case to test this principle.
llvm-svn: 301480
Do not conflict if a write writes the same value as already known.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32026
llvm-svn: 301460
Do not conflict if the value of Existing and Proposed are the same.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32025
llvm-svn: 301301
Added a small change to the way pointer arguments are set in the kernel
code generation. The way the pointer is retrieved now, specifically requests
global address space to be annotated. This is necessary, if the IR should be
run through NVPTX to generate OpenCL compatible PTX.
The changes do not affect the PTX Strings generated for the CUDA target
(nvptx64-nvidia-cuda), but are necessary for OpenCL (nvptx64-nvidia-nvcl).
Additionally, the data layout has been updated to what the NVPTX Backend requests/recommends.
Contributed-by: Philipp Schaad
Reviewers: Meinersbur, grosser, bollu
Reviewed By: grosser, bollu
Subscribers: jlebar, pollydev, llvm-commits, nemanjai, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32215
llvm-svn: 301299
When both, OccupiedAndKnown and Unused are given, use the former only
for the Known values. The relation Unused \union Occupied must always
hold.
This allows us to specify Known independently of Occupied. It is needed
for an artificial test case in https://reviews.llvm.org/D32025.
llvm-svn: 301284
Earlier, the call to buildFlow was:
WAR = buildFlow(Write, Read, MustWrite, Schedule).
This meant that Read could block another Read, since must-sources can
block each other.
Fixed the call to buildFlow to correctly compute Read. The resulting
code needs to do some ISL juggling to get the output we want.
Bug report: https://bugs.llvm.org/show_bug.cgi?id=32623
Reviewers: Meinersbur
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32011
llvm-svn: 301266
The isl unittest modified its PATH variable to point to the LLVM bin dir.
When building out-of-LLVM-tree, it does not contain the
polly-isl-test executable, hence the test fails.
Ensure that the polly-isl-test is written to a bin directory in the
build root, just like it would happen in an inside-LLVM build.
Then, change PATH to include that dir such that the executable in it
is prioritized before any other location.
llvm-svn: 301096
Unittests are linked against a subset of LLVM libraries and its
transitive dependencies resolved by CMake. The information about indirect
library dependency is not available when building separately from
LLVM, which result in missing symbol errors while linking.
Resolve this issue by querying llvm-config about the available
LLVM libraries and link against all of them, since dependence
information is still not available.
llvm-svn: 301095
We can only link against libLLVM.so or the individual libLLVM*.so
components, but not both of them. Doing so results in these components
exist twice in the programs address space, since it is already contained
in libLLVM.so. The observable effect of this is that command line
switches are registered multiple times (once for each instance),
which is an error.
This fixes llvm.org/PR32735.
Reported-by: Singapuram Sanjay Srivallabh <singapuram.sanjay@gmail.com>
llvm-svn: 301020
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32027
llvm-svn: 300874
After the isl C++ binding generator is now close to being upstreamed to isl, we
synchronize the latest changes to Polly. These are mostly formatting changes
plus a small interface change for the foreach callback function and some naming
changes in isl::boolean.
llvm-svn: 300398
This commit switches Polly over to the isl::obj::foreach_* implementation, which
is part of the new isl bindings and follows the foreach pattern established in
Polly by Michael Kruse.
The original isl C function:
isl_stat isl_union_set_foreach_set(__isl_keep isl_union_set *uset,
isl_stat (*fn)(__isl_take isl_set *set, void *user), void *user);
which required the user to define a static callback function to which all
interesting parameters are passed via a 'void *' user-pointer, is on the
C++ side available as a function that takes a std::function<>, which can
carry any additional arguments without the need for a user pointer:
stat UnionSet::foreach_set(const std::function<stat(set)> &fn) const;
The following code illustrates the use of the new C++ interface:
auto Lambda = [=, &Result](isl::set Set) -> isl::stat {
auto Shifted = shiftDimension(Set, Pos, Amount);
Result = Result.add(Shifted);
return isl::stat::ok;
}
UnionSet.foreach_set(Lambda);
Polly had some specialized foreach functions which did not require the lambdas
to return a status flag. We remove these functions in this commit to move Polly
completely over to the new isl interface. We may in the future discuss if
functors without return values can be supported easily.
Another extension proposed by Michael Kruse is the use of C++ iterators to allow
the use of normal for loops to iterate over these sets. Such an extension would
allow us to further simplify the code.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D30620
llvm-svn: 300323
Dimensions of band nodes can be implicitly permuted by the algorithm applied
during the schedule generation.
For example, in case of the following matrix-matrix multiplication,
for (i = 0; i < 1024; i++)
for (k = 0; k < 1024; k++)
for (j = 0; j < 1024; j++)
C[i][j] += A[i][k] * B[k][j];
it can produce the following schedule tree
domain: "{ Stmt_for_body6[i0, i1, i2] : 0 <= i0 <= 1023 and 0 <= i1 <= 1023 and
0 <= i2 <= 1023 }"
child:
schedule: "[{ Stmt_for_body6[i0, i1, i2] -> [(i0)] },
{ Stmt_for_body6[i0, i1, i2] -> [(i1)] },
{ Stmt_for_body6[i0, i1, i2] -> [(i2)] }]"
permutable: 1
coincident: [ 1, 1, 0 ]
The current implementation of the pattern matching optimizations relies on the
initial ordering of dimensions. Otherwise, it can produce the miscompilation
(e.g., [1]).
This patch helps to restore the initial ordering of dimensions by recreating
the band node when the corresponding conditions are satisfied.
Refs.:
[1] - https://bugs.llvm.org/show_bug.cgi?id=32500
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D31741
llvm-svn: 299662
Because Polly exposes parameters that directly influence tile size
calculations, one can setup situations like divide-by-zero.
Check against a possible divide-by-zero in getMacroKernelParams
and return early.
Also assert at the end of getMacroKernelParams that the block sizes
computed for matrices are positive (>= 1).
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31708
llvm-svn: 299633
The current StackColoring algorithm does not correctly handle the
situation when some, but not all paths from a BB to the entry node
cross a llvm.lifetime.start. According to an interpretation of the
language reference at
http://llvm.org/docs/LangRef.html#llvm-lifetime-start-intrinsic
this might be correct, but it would cost too much effort to handle
in StackColoring.
To be on the safe side, remove all lifetime markers even in the original
code version (they have never been copied to the optimized version)
to ensure that no path to the entry block will cross a
llvm.lifetime.start.
The same principle applies to paths the a function return and the
llvm.lifetime.end marker, so we remove them as well.
This fixes llvm.org/PR32251.
Also see the discussion at
http://lists.llvm.org/pipermail/llvm-dev/2017-March/111551.html
llvm-svn: 299585
= Change of WAR, WAW generation: =
- `buildFlow(Sink, MustSource, MaySource, Sink)` treates any flow of the form
`sink <- may source <- must source` as a *may* dependence.
- we used to call:
```lang=cpp, name=old-flow-call.cpp
Flow = buildFlow(MustWrite, MustWrite, Read, Schedule);
WAW = isl_union_flow_get_must_dependence(Flow);
WAR = isl_union_flow_get_may_dependence(Flow);
```
- This caused some WAW dependences to be treated as WAR dependences.
- Incorrect semantics.
- Now, we call WAR and WAW correctly.
== Correct WAW: ==
```lang=cpp, name=new-waw-call.cpp
Flow = buildFlow(Write, MustWrite, MayWrite, Schedule);
WAW = isl_union_flow_get_may_dependence(Flow);
isl_union_flow_free(Flow);
```
== Correct WAR: ==
```lang=cpp, name=new-war-call.cpp
Flow = buildFlow(Write, Read, MustaWrite, Schedule);
WAR = isl_union_flow_get_must_dependence(Flow);
isl_union_flow_free(Flow);
```
- We want the "shortest" WAR possible (exact dependences).
- We mark all the *must-writes* as may-source, reads as must-souce.
- Then, we ask for *must* dependence.
- This removes all the reads that flow through a *must-write*
before reaching a sink.
- Note that we only block ealier writes with *must-writes*. This is
intuitively correct, as we do not want may-writes to block
must-writes.
- Leaves us with direct (R -> W).
- This affects reduction generation since RED is built using WAW and WAR.
= New StrictWAW for Reductions: =
- We used to call:
```lang=cpp,name=old-waw-war-call.cpp
Flow = buildFlow(MustWrite, MustWrite, Read, Schedule);
WAW = isl_union_flow_get_must_dependence(Flow);
WAR = isl_union_flow_get_may_dependence(Flow);
```
- This *is* the right model of WAW we need for reductions, just not in general.
- Reductions need to track only *strict* WAW, without any interfering reductions.
= Explanation: Why the new WAR dependences in tests are correct: =
- We no longer set WAR = WAR - WAW
- Hence, we will have WAR dependences that were originally removed.
- These may look incorrect, but in fact make sense.
== Code: ==
```lang=llvm, name=new-war-dependence.ll
; void manyreductions(long *A) {
; for (long i = 0; i < 1024; i++)
; for (long j = 0; j < 1024; j++)
; S0: *A += 42;
;
; for (long i = 0; i < 1024; i++)
; for (long j = 0; j < 1024; j++)
; S1: *A += 42;
;
```
=== WAR dependence: ===
{ S0[1023, 1023] -> S1[0, 0] }
- Between `S0[1023, 1023]` and `S1[0, 0]`, we will have the dependences:
```lang=cpp, name=dependence-incorrect, counterexample
S0[1023, 1023]:
*-- tmp = *A (load0)--*
WAR 2 add = tmp + 42 |
*-> *A = add (store0) |
WAR 1
S1[0, 0]: |
tmp = *A (load1) |
add = tmp + 42 |
A = add (store1)<-*
```
- One may assume that WAR2 *hides* WAR1 (since store0 happens before
store1). However, within a statement, Polly has no idea about the
ordering of loads and stores.
- Hence, according to Polly, the code may have looked like this:
```lang=cpp, name=dependence-correct
S0[1023, 1023]:
A = add (store0)
tmp = A (load0) ---*
add = A + 42 |
WAR 1
S1[0, 0]: |
tmp = A (load1) |
add = A + 42 |
A = add (store1) <-*
```
- So, Polly generates (correct) WAR dependences. It does not make sense
to remove these dependences, since they are correct with respect to
Polly's model.
Reviewers: grosser, Meinersbur
tags: #polly
Differential revision: https://reviews.llvm.org/D31386
llvm-svn: 299429
Summary:
A couple of the utilities used to analyze or build IR make explicit use of the legacy PM on their interface, to access analysis results. This patch removes the legacy PM from the interface, and just passes the required results directly.
This shouldn't introduce any function changes, although the API technically allowed to obtain two different analysis results before, one passed by reference and one through the PM. I don't believe that was ever intended, however.
Reviewers: grosser, Meinersbur
Reviewed By: grosser
Subscribers: nemanjai, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31653
llvm-svn: 299423
Instead of creating the declaration ourselves, we obtain it directly from the
LLVM intrinsic definitions. This addresses a post-review comment for r299359.
Suggested-by: Hongzing Zheng <etherzhhb@gmail.com>
llvm-svn: 299360
Add support for -polly-codegen-perf-monitoring. When performance monitoring
is enabled, we emit performance monitoring code during code generation that
prints after program exit statistics about the total number of cycles executed
as well as the number of cycles spent in scops. This gives an estimate on how
useful polyhedral optimizations might be for a given program.
Example output:
Polly runtime information
-------------------------
Total: 783110081637
Scops: 663718949365
In the future, we might also add functionality to measure how much time is spent
in optimized scops and how many cycles are spent in the fallback code.
Reviewers: bollu,sebpop
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31599
llvm-svn: 299359
Trivial fix for two testcases. When Polly isn't linked into opt,
independent of whether it's built in-tree or not, these testcases forget
to load the appropriate library.
Contributed-by: Philip Pfaffe <philip.pfaffe@gmail.com>
Differential Revision: https://reviews.llvm.org/D31596
llvm-svn: 299357
No-alias metadata grows quadratic in the size of arrays involved, which can
become very costly for large programs. This commit bounds the number of arrays
for which we construct no-alias information to ten. This is conservatively
correct, as we just provide less information to LLVM and speeds up the compile
time of one of my internal test cases from 'does-not-terminate' to
'finishes-in-less-than-a-minute'. In the future we might try to be more clever
here, but this change should provide a good baseline.
llvm-svn: 299352
Provide an common way for testing if a statement contains something
for region and block statements. First user is
RegionGenerator::addOperandToPHI.
Suggested-by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 298617
Add shiftDim and convertZoneToTimepoints overloads for isl maps.
Add distributeDomain, liftDomains and applyDomainRange functions.
These are going to be used in https://reviews.llvm.org/D31247
(Add known array contents to Knowledge)
llvm-svn: 298543
The isl C++ bindings now has implicit conversions from isl::set to
isl::union_set. Therefore the additional overload accepting isl::set
is not required anymore.
llvm-svn: 298529
