If LIBCXX_ENABLE_SHARED isn't explicitly set on the cmake command
line, isn't set in the cache, and the libcxxabi project is configured
before libcxx, then LIBCXX_ENABLE_SHARED isn't defined yet. Once
the libcxx cmake project has been parsed, LIBCXX_ENABLE_SHARED would
have been set to its default value of ON.
This makes sure that the symbols are properly dllexported in such
a configuration scenario.
Differential Revision: https://reviews.llvm.org/D120982
This extension is a portability trap for users, since no other standard
library supports it. Furthermore, the Standard explicitly allows
implementations to reject std::allocator<cv T>, so allowing it is
really going against the current.
This was discovered in D120684: this extension required `const_cast`ing
in `__construct_range_forward`, a fishy bit of code that can be removed
if we don't support the extension anymore.
Differential Revision: https://reviews.llvm.org/D120996
A recent patch made it possible to emit more localized error messages
pertaining to actual arguments in non-intrinsic procedure references.
Use these new powers for good and make intrinsic error messages more
precise, too.
Differential Revision: https://reviews.llvm.org/D121126
Support ANSI escape codes for bright colors variants. Most modern
terminals support them. LLDB is not using them in any of its defaults,
but they're useful for people who want to modify their preferred ANSI
prefix/suffix.
Differential revision: https://reviews.llvm.org/D121131
This improves this test a lot because before when using the "attachCommands" to run the following commands:
(lldb) target create -d /path/to/a.out
(lldb) process launch
This was racy as it wasn't stopping the program at the entry point, and the process might run to completion before we can even debug it. With the recent changes to the "attachCommands" we were waiting for the process to stop, but the process might be exited already, and that _should_ have caused the attach to fail since there was no process to attach to. By adding "--stop-at-entry" to the process launch, we ensure this should be less racy and give us a valid process to attach to.
The loader TLS test for x86_64, which now passes, has been enabled.
A future change should enable the test for aarch64 as well.
Reviewed By: jeffbailey
Differential Revision: https://reviews.llvm.org/D121091
When a contiguous range of a cooked character stream is being
mapped to a range of source provenance, the code was assuming
that the "end()" position of the input range -- being the character
immediately after the range -- would also follow the range's
source provenance. This isn't always the case.
Modify the code to work with the true last character of the
input range (at end()-1) and to also cope with cases when that
last position truly maps to an earlier provenance, which can happen
when the prescanner has inserted a space into the cooked character
stream.
Differential Revision: https://reviews.llvm.org/D121124
This ELF note is aarch64 and Android-specific. It specifies to the
dynamic loader that specific work should be scheduled to enable MTE
protection of stack and heap regions.
Current synthesis of the ".note.android.memtag" ELF note is done in the
Android build system. We'd like to move that to the compiler, and this
is the first step.
Reviewed By: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D119381
vslide1up/down have this flag set, but the value isn't a splat.
Rename for clarity.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D121037
Previously we used sra+add+xor if ADDCARRY is supported. This changes
to sra+xor+sub is SUBCARRY is available.
This is consistent with the recent change to the default expansion
in LegalizeDAG.
Differential Revision: https://reviews.llvm.org/D121039
The current StandardToLLVM conversion patterns only really handle
the Func dialect. The pass itself adds patterns for Arithmetic/CFToLLVM, but
those should be/will be split out in a followup. This commit focuses solely
on being an NFC rename.
Aside from the directory change, the pattern and pass creation API have been renamed:
* populateStdToLLVMFuncOpConversionPattern -> populateFuncToLLVMFuncOpConversionPattern
* populateStdToLLVMConversionPatterns -> populateFuncToLLVMConversionPatterns
* createLowerToLLVMPass -> createConvertFuncToLLVMPass
Differential Revision: https://reviews.llvm.org/D120778
Add a utility function to strip comments from a "raw" tokenstream. The
derived stream will be fed to the GLR parser (for early testing).
Differential Revision: https://reviews.llvm.org/D121092
Before this patch task priorities were ignored, that was a valid implementation
as the task priority is a hint according to OpenMP specification.
Implemented shared list of sorted (high -> low) task deques one per task
priority value. Tasks execution changed to first check if priority tasks ready
for execution exist, and these tasks executed before others;
otherwise usual tasks execution mechanics work.
Differential Revision: https://reviews.llvm.org/D119676
AIX print -0.0 , inf, nan differently, which are causing the test
failures. We are OK for most other tests.
This patch remove the tests related these limitations conditionally on AIX,
so that we can enable the other tests to avoid losing test coverage.
The general direction is:
```
if strings don't differ between environments, keep the string literal "INF" and the padding, instead of folding them into variables.
```
Reviewed By: ldionne, #libc, Mordante
Differential Revision: https://reviews.llvm.org/D120448
This patches adds the code to handle host association for
inner subroutines and functions.
This patch is part of the upstreaming effort from fir-dev branch.
Reviewed By: jeanPerier
Differential Revision: https://reviews.llvm.org/D121134
Co-authored-by: Eric Schweitz <eschweitz@nvidia.com>
Co-authored-by: Jean Perier <jperier@nvidia.com>
Co-authored-by: V Donaldson <vdonaldson@nvidia.com>
The index incrementation code used for FINDLOC, MAXLOC, and MINLOC folding
would crash if the array had a zero extent on the dimension selected with
a DIM= argument since the subscript passed to IncrementSubscripts would
have a value less than the lower bound. Fix, and add tests.
Differential Revision: https://reviews.llvm.org/D121125
Move `__quoted_output_proxy` into the one file that uses it.
A `const char*` has no associated traits class, so `std::quoted("literal")`
should be printable into any basic_ostream regardless of traits.
Use hidden-friend `operator<<` and `operator>>`, since we're permitted to.
(The exact signature is unspecified because the class itself is unspecified.)
We shouldn't support `std::quoted("literal")` in C++03 or C++11 mode.
(We do need `std::__quoted(s)` and `std::__quoted(cs)` in C++11 mode,
because they're used by `std::__fs::filesystem::path`.)
Differential Revision: https://reviews.llvm.org/D120135
Fix a number of issues with MCSymbolizer::tryAddingSymbolicOperand()
in X86Disassembler:
* Pass instruction size instead of immediate size.
* Correctly adjust the value of PC-relative operands.
* Set operand offset to zero when the operand is specified
implicitly.
Reviewed By: Amir, skan
Differential Revision: https://reviews.llvm.org/D121065
* Use default ref capture for non-escaping lambdas (this makes
maintenance easier by allowing new uses, removing uses, having
conditional uses (such as in assertions) not require updates to an
explicit capture list)
* Simplify addPrivate API not to take a lambda, since it calls it
unconditionally/immediately anyway - most callers are simply passing
in a named value or short expression anyway and the lambda syntax just
adds noise/overhead
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D121077
The motivation is to enable the MSVC-style JMC instrumentation usable by a ELF-based
debugger. Since there is no prior experience implementing JMC feature for ELF-based
debugger, it might be better to just reuse existing MSVC-style JMC instrumentation.
For debuggers that support both ELF&COFF (like lldb), the JMC implementation might
be shared between ELF&COFF. If this is found to inadequate, it is pretty low-cost
switching to alternatives.
Implementation:
- The '-fjmc' is already a driver and cc1 flag. Wire it up for ELF in the driver.
- Refactor the JMC instrumentation pass a little bit.
- The ELF handling is different from MSVC in two places:
* the flag section name is ".just.my.code" instead of ".msvcjmc"
* the way default function is provided: MSVC uses /alternatename; ELF uses weak function.
Based on D118428.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D119910
These unit tests resides in an internal repository. Porting the tests to the
public repository.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D121021
The default lowering of vector transpose operations generates a large sequence of
scalar extract/insert operations, one pair for each scalar element in the input tensor.
In other words, the vector transpose is scalarized. However, there are transpose
patterns where one or more adjacent high-order dimensions are not transposed (for
example, in the transpose pattern [1, 0, 2, 3], dimensions 2 and 3 are not transposed).
This patch improves the lowering of those cases by not scalarizing them and extracting/
inserting a full n-D vector, where 'n' is the number of adjacent high-order dimensions
not being transposed. By doing so, we prevent the scalarization of the code and generate a
more performant vector version.
Paradoxically, this patch shouldn't improve the performance of transpose operations if
we are using LLVM. The LLVM pipeline is able to optimize away some of the extract/insert
operations and the SLP vectorizer is converting the scalar operations back to its vector
form. However, scalarizing a vector version of the code in MLIR and relying on the SLP
vectorizer to reconstruct the vector code again is highly undesirable for several reasons.
Reviewed By: nicolasvasilache, ThomasRaoux
Differential Revision: https://reviews.llvm.org/D120601
This is part of the implementation of the dataflow analysis framework.
See "[RFC] A dataflow analysis framework for Clang AST" on cfe-dev.
Reviewed-by: ymandel, xazax.hun
Differential Revision: https://reviews.llvm.org/D120984
... from a `uint64_t` to a `uint32_t`. (LLD-ELF uses a `uint32_t` too.)
About a 1.7% reduction in peak RSS when linking chromium_framework on my
3.2 GHz 16-Core Intel Xeon W Mac Pro, and no stat sig change in wall
time.
</Users/jezng/test2.sh ["before"]> </Users/jezng/test2.sh ["after"]> difference (95% CI)
RSS 1003036672.000 ± 9891065.259 985539505.231 ± 10272748.749 [ -2.3% .. -1.2%]
samples 27 26
base diff difference (95% CI)
sys_time 1.277 ± 0.023 1.277 ± 0.024 [ -0.9% .. +0.9%]
user_time 6.682 ± 0.046 6.598 ± 0.043 [ -1.6% .. -0.9%]
wall_time 5.904 ± 0.062 5.895 ± 0.063 [ -0.7% .. +0.4%]
samples 46 28
No appreciable change (~0.01%) in number of `equals` comparisons either:
Before:
ld64.lld: ICF needed 8 iterations
ld64.lld: equalsConstant() called 701643 times
ld64.lld: equalsVariable() called 3438526 times
After:
ld64.lld: ICF needed 8 iterations
ld64.lld: equalsConstant() called 701729 times
ld64.lld: equalsVariable() called 3438526 times
Reviewed By: #lld-macho, MaskRay, thakis
Differential Revision: https://reviews.llvm.org/D121052
The existing hashing of stubsHelperIndex has mostly been a no-op* for
some time now (ever since we made ICF run before dylib symbols get their
stubs indices assigned). I guess we could consider hashing the name +
filename of the DylibSymbol instead, but I'm not sure the overhead's
worth it... moreover, LLD/ELF only hashes their Defined symbols as well.
*: Technically it does change the hash value since stubsHelperIndex is
initialized to `UINT32_MAX` by default. But since all stubsHelperIndex
values are the same at when ICF runs, they don't add any useful
information to the hash.
This is debug code that is disabled by default. It'll provide a easy way
to figure out the impact (if any) of tweaking ICF's hashing algorithm
(since a poor quality hash will result in many more `equals*` calls).
Reviewed By: #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D121051
