Both debug and release clang builds have segfaulted on recent
changes, non deterministically, while doing the single/multi-thread
test all test files. Removing recent test files, to see if it gives
a clue.
Fixes#1092. Allows arrays of opaques to keep arrayness, unless
needed by uniform array flattening.
Can handle assignments of mixed amounts of flattening.
A single texture can statically appear in code mixed with a shadow sampler
and a non-shadow sampler. This would be create invalid SPIR-V, unless
one of them is provably dead.
The previous detection of this happened before DCE, so some shaders would
trigger the error even though they wouldn't after DCE. To handle that
case, this PR splits the texture into two: one with each mode. It sets
"needsLegalization" (if that happens for any texture) to warn that this shader
will need post-compilation legalization.
If the texture is only used with one of the two modes, behavior is as it
was before.
Add support for Subpass Input proposal of issue #1069.
Subpass input types are given as:
layout(input_attachment_index = 1) SubpassInput<float4> subpass_f;
layout(input_attachment_index = 2) SubpassInput<int4> subpass_i;
layout(input_attachment_index = 3) SubpassInput<uint4> subpass_u;
layout(input_attachment_index = 1) SubpassInputMS<float4> subpass_ms_f;
layout(input_attachment_index = 2) SubpassInputMS<int4> subpass_ms_i;
layout(input_attachment_index = 3) SubpassInputMS<uint4> subpass_ms_u;
The input attachment may also be specified using attribute syntax:
[[vk::input_attachment_index(7)]] SubpassInput subpass_2;
The template type may be a shorter-than-vec4 vector, but currently user
structs are not supported. (An unimplemented error will be issued).
The load operations are methods on objects of the above type:
float4 result = subpass_f.SubpassLoad();
int4 result = subpass_i.SubpassLoad();
uint4 result = subpass_u.SubpassLoad();
float4 result = subpass_ms_f.SubpassLoad(samp);
int4 result = subpass_ms_i.SubpassLoad(samp);
uint4 result = subpass_ms_u.SubpassLoad(samp);
Additionally, the AST printer could not print EOpSubpass* nodes. Now it can.
Fixes#1069
- support C++11 style brackets [[...]]
- support namespaces [[vk::...]]
- support these on parameter declarations in functions
- support location, binding/set, input attachments
Also added known-good mechanism to fetch latest validated spirv-tools.
Also added -Od and -Os to disable optimizer and optimize for size.
Fetching spirv-tools is optional for both glsl and hlsl. Legalization
of hlsl is done by default if spirv-opt is present at cmake time.
Optimization for glsl is currently done through the option -Os.
Legalization testing is currently only done on four existing shaders.
A separate baseLegalResults directory holds those results. All previous
testing is done with the optimizer disabled.
InputPatch parameters to patch constant functions were not using the
internal (temporary) variable type. That could cause validation errors
if the input patch had a mixture of builtins and user qualified members.
This uses the entry point's internal form.
There is currently a limitation: if an InputPatch is used in a PCF,
it must also have appeared in the main entry point's parameter list.
That is not a limitation of HLSL. Currently that situation is detected
and an "implemented" error results. The limitation can be addressed,
but isn't yet in the current form of the PR.
Hull shaders have an implicitly arrayed output. This is handled by creating an arrayed form of the
provided output type, and writing to the element of it indexed by InvocationID.
The implicit indirection into that array was causing some troubles when copying to a split
structure. handleAssign was able to handle simple symbol lvalues, but not an lvalue composed
of an indirection into an array.
There were several locations in TGlslangToSpvTraverser::handleUserFunctionCall testing for
whether a fn argument should be in the lvalue or rvalue array. They must get the same
result for indexing sanity, but had slightly different logic.
They're now forced into the same test.
Changes:
(1) Allow clip/cull builtins as both input and output in the same shader stage. Previously,
not enough data was tracked to handle this.
(2) Handle the extra array dimension in GS inputs. The synthesized external variable can
now be created with the extra array dimension if needed, and the form conversion code is
able to handle it as well.
For example, both of these GS inputs would result in the same synthesized external type:
triangle in float4 clip[3] : SV_ClipDistance
triangle in float2 clip[3][2] : SV_ClipDistance
In the second case, the inner array dimension packs with the 2-vector of floats into an array[4],
which there is an array[3] of due to the triangle geometry.
HLSL allows a range of types for clip and cull distances. There are
three dimensions, including arrayness, vectorness, and semantic ID.
SPIR-V requires clip and cull distance be a single array of floats in
all cases.
This code provides input side conversion between the SPIR-V form and
the HLSL form. (Output conversion was added in PR #947 and #997).
This PR extends HlslParseContext::assignClipCullDistance to cope with
the input side conversion. Not as much changed as appears: there was
also a lot of renaming to reflect the fact that the code now handles
either direction.
Currently, non-{frag,vert} stages are not handled, and are explicitly
rejected.
Fixes#1026.
Some languages allow a restricted set of user structure types returned from texture sampling
operations. Restrictions include the total vector size of all components may not exceed 4,
and the basic types of all members must be identical.
This adds underpinnings for that ability. Because storing a whole TType or even a simple
TTypeList in the TSampler would be expensive, the structure definition is held in a
table outside the TType. The TSampler contains a small bitfield index, currently 4 bits
to support up to 15 separate texture template structure types, but that can be adjusted
up or down. Vector returns are handled as before.
There are abstraction methods accepting and returning a TType (such as may have been parsed
from a grammar). The new methods will accept a texture template type and set the
sampler to the structure if possible, checking a range of error conditions such as whether
the total structure vector components exceed 4, or whether their basic types differe, or
whether the struct contains non-vector-or-scalar members. Another query returns the
appropriate TType for the sampler.
High level summary of design:
In the TSampler, this holds an index into the texture structure return type table:
unsigned int structReturnIndex : structReturnIndexBits;
These are the methods to set or get the return type from the TSampler. They work for vector or structure returns, and potentially could be expanded to handle other things (small arrays?) if ever needed.
bool setTextureReturnType(TSampler& sampler, const TType& retType, const TSourceLoc& loc);
void getTextureReturnType(const TSampler& sampler, const TType& retType, const TSourceLoc& loc) const;
The ``convertReturn`` lambda in ``HlslParseContext::decomposeSampleMethods`` is greatly expanded to know how to copy a vec4 sample return to whatever the structure type should be. This is a little awkward since it involves introducing a comma expression to return the proper aggregate value after a set of memberwise copies.
This adds support for #pragma pack_matrix() to the HLSL front end.
The pragma sets the default matrix layout for subsequent unqualified matrices
in structs or buffers. Explicit qualification overrides the pragma value. Matrix
layout is not permitted at the structure level in HLSL, so only leaves which are
matrix types can be so qualified.
Note that due to the semantic (not layout) difference in first matrix indirections
between HLSL and SPIR-V, the sense of row and column major are flipped. That's
independent of this PR: just a factor to note. A column_major qualifier appears
as a RowMajor member decoration in SPIR-V modules, and vice versa.
The HLSL FE tracks four versions of a declared type to avoid losing information, since it
is not (at type-decl time) known how the type will be used downstream. If such a type
was used in a cbuffer declaration, the cbuffer type's members should have been using
the uniform form of the original user structure type, but were not.
This would manifest as matrix qualifiers (and other things, such as pack offsets) on user struct
members going missing in the SPIR-V module if the struct type was a member of a cbuffer, like so:
struct MyBuffer
{
row_major float4x4 mat1;
column_major float4x4 mat2;
};
cbuffer Example
{
MyBuffer g_MyBuffer;
};
Fixes: #789
HLSL allows several variables to be declared. There are packing rules involved:
e.g, a float3 and a float1 can be packed into a single array[4], while for a
float3 and another float3, the second one will skip the third array entry to
avoid straddling
This is implements that ability. Because there can be multiple variables involved,
and the final output array will often be a different type altogether (to fuse
the values into a single destination), a new variable is synthesized, unlike the prior
clip/cull support which used the declared variable. The new variable name is
taken from one of the declared ones, so the old tests are unchanged.
Several new tests are added to test various packing scenarios.
Only two semantic IDs are supported: 0, and 1, per HLSL rules. This is
encapsulated in
static const int maxClipCullRegs = 2;
and the algorithm (probably :) ) generalizes to larger values, although there
are a few issues around how HLSL would pack (e.g, would 4 scalars be packed into
a single HLSL float4 out reg? Probably, and this algorithm assumes so).
