This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
It turns out we actually import a bunch of selection code for intrinsics. The
imported code checks that the register banks on the G_INTRINSIC instruction
are correct. If so, it goes ahead and selects it.
This adds code to AArch64RegisterBankInfo to allow us to correctly determine
register banks on intrinsics which have known register bank constraints.
For now, this only handles @llvm.aarch64.neon.uaddlv. This is necessary for
porting AArch64TargetLowering::LowerCTPOP.
Also add a utility for getting the intrinsic ID from a G_INTRINSIC instruction.
This seems a little nicer than having to know about how intrinsic instructions
are structured.
Differential Revision: https://reviews.llvm.org/D100398
These are pseudos without any users, so DCE was killing them in the combiner.
Marking them as having side effects doesn't seem quite right since they don't.
Gives a nice 0.3% geomean size win on CTMark -Os.
Differential Revision: https://reviews.llvm.org/D98811
If we have
```
%vec = G_BUILD_VECTOR %reg, %reg, ..., %reg
```
Then lower it to
```
%vec = G_DUP %reg
```
Also update the selector to handle constant splats on G_DUP.
This will not combine when the splat is all zeros or ones. Tablegen-imported
patterns rely on these being G_BUILD_VECTOR.
Minor code size improvements on CTMark at -Os.
Also adds some utility functions to make it a bit easier to recognize splats,
and an AArch64-specific splat helper.
Differential Revision: https://reviews.llvm.org/D97731
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
Implements same logis as in SelectionDAG.
G_FMINNUM_IEEE and G_FMAXNUM_IEEE are never SNaN by definition and
never NaN when one operand is known non-NaN and other known non-SNaN.
G_FMINNUM and G_FMAXNUM are never NaN/SNaN when one of the operands
is known non-NaN/SNaN.
Differential Revision: https://reviews.llvm.org/D91716
Treat hint instructions like G_ASSERT_ZEXT like COPY instructions in helpers
which walk through copies.
This ensures that instructions like G_ASSERT_ZEXT won't impact any optimizations
that rely on these helpers.
Differential Revision: https://reviews.llvm.org/D95577
If constants are hidden behind G_ANYEXT we can treat them same way as G_SEXT.
For that purpose we extend getConstantVRegValWithLookThrough with option
to handle G_ANYEXT same way as G_SEXT.
Differential Revision: https://reviews.llvm.org/D92219
When constraining an operand register using constrainOperandRegClass(),
the function may emit a COPY in case the provided register class does
not match the current operand register class. However, the operand
itself is not updated to make use of the COPY, thereby resulting in
incorrect code. This patch fixes that bug by updating the machine
operand accordingly.
Reviewed By: dsanders
Differential Revision: https://reviews.llvm.org/D91244
Returning int64_t was arbitrarily limiting for wide integer types, and
the functions should handle the full generality of the IR.
Also changes the full form which returns the originally defined
vreg. Add another wrapper for the common case of just immediately
converting to int64_t (arguably this would be useful for the full
return value case as well).
One possible issue with this change is some of the existing uses did
break without conversion to getConstantVRegSExtVal, and it's possible
some without adequate test coverage are now broken.
It's fairly common to need matchers for a specific constant value, or for
common idioms like finding a negated register.
Add
- `m_SpecificICst`, which returns true when matching a specific value..
- `m_ZeroInt`, which returns true when an integer 0 is matched.
- `m_Neg`, which returns when a register is negated.
Also update a few places which use idioms related to the new matchers.
Differential Revision: https://reviews.llvm.org/D91397
Check for NoNaNsFPMath function attribute in isKnownNeverSNaN.
Function attributes are in held in 'TargetMachine.Options'.
Among other things, this allows selection of some patterns imported
in D87351 since G_FCANONICALIZE is not generated when isKnownNeverSNaN
returns true in lowerFMinNumMaxNum.
However we notice some incorrect results since function attributes are
not correctly written in TargetMachine.Options when next function is
processed. Take a look at @v_test_no_global_nnans_med3_f32_pat0_srcmod0,
it has "no-nans-fp-math"="false" but TargetMachine.Options still has it
set to true since first function in test file had this attribute set to
true. This will be fixed in D87511.
Differential Revision: https://reviews.llvm.org/D87456
This combine previously tried to take sequences like:
%cond = G_ICMP pred, a, b
G_BRCOND %cond, %truebb
G_BR %falsebb
%truebb:
...
%falsebb:
...
and by inverting the compare predicate and swapping branch targets, delete the
G_BR and instead have a single conditional branch to the falsebb. Since in an
earlier patch we have a combine to fold not(icmp) into just an inverted icmp,
we don't need this combine to do as much. This patch instead generalizes the
combine by just looking for:
G_BRCOND %cond, %truebb
G_BR %falsebb
%truebb:
...
%falsebb:
...
and then inverting the condition using a not (xor). The xor can be folded away
in a separate combine. This change also lets us avoid some optimization code
in the IRTranslator.
I also think that deleting G_BRs in the combiner is unnecessary. That's
something that targets can decide to do at selection time and could simplify
generic code in future.
Differential Revision: https://reviews.llvm.org/D86664
This is needed for an upcoming change to how we translate conditional branches
which might generate these.
Differential Revision: https://reviews.llvm.org/D86383
These should really match either G_BUILD_VECTOR or
G_BUILD_VECTOR_TRUNC, but there doesn't seem to be an existing
mechanism for matching alternative opcodes. There is GIM_SwitchOpcode,
but it seems to assume it's oly only used for matcher optimization.
I could also omit any opcode check and rely on the matcher directly
checking the opcode, but the table optimizer currently assumes there
has to be an opcode check.
Also doesn't try to handle undef elements like the DAG version.
Get the argument register and ensure there's a copy to the virtual
register. AMDGPU and AArch64 have similarish code to get the livein
value, and I also want to use this in multiple places.
This is a bit more aggressive about setting the register class than
the original function, but that's probably OK.
I think we're missing a few verifier checks for function live ins. I
noticed AArch64's calling convention code is not actually adding
liveins to functions, only the entry block (which apparently might not
matter that much?). There should probably be a verifier check that
entry block live ins are also live into the function. We also might
need a verifier check that the copy to the livein virtual register is
in the entry block.
This one is pretty easy and shrinks the list of unhandled
intrinsics. I'm not sure how relevant the insert point is. Using the
insert position of EntryBuilder will place this after
constants. SelectionDAG seems to end up emitting these after argument
copies and before anything else, but I don't think it really
matters. This also ends up emitting these in the opposite order from
SelectionDAG, but I don't think that matters either.
This also needs a fix to stop the later passes dropping this as a dead
instruction. DeadMachineInstructionElim's version of isDead special
cases LOCAL_ESCAPE for some reason, and I'm not sure why it's excluded
from MachineInstr::isLabel (or why isDead doesn't check it).
I also noticed DeadMachineInstructionElim never considers inline asm
as dead, but GlobalISel will drop asm with no constraints.
In future, we'd like to use the perfect-shuffle mechanism to deal with these
shuffle permutations. For now, this improves performance by avoiding the
super-expensive const-pool load + tbl instruction.
Differential Revision: https://reviews.llvm.org/D84866
Try to make the behavior more consistent with getGCDType, and bias
towards returning something closer to the source type whenever there's
an ambiguity.
Try harder to find a canonical unmerge type when trying to cover the
desired target type. Handle finding a compatible unmerge type for two
vectors with different element types. This will return the largest
multiple of the source vector element that will evenly divide the
target vector type.
Also make the handling mixing scalars and vectors, and prefer the
source element type as the unmerge target type.
Summary:
This will allow us to fix the issue where the lost locations
verifier causes CodeGen changes on lost locations because it
falls back on DAGISel
Reviewers: qcolombet, bogner, aprantl, vsk, paquette
Subscribers: rovka, hiraditya, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78261
https://reviews.llvm.org/D67133
While investigating some non determinism (CSE doesn't produce wrong
code, it just doesn't CSE some times) in GISel CSE on an out of tree
target, I realized that the core issue was that there were lots of code
that mutates (setReg, setRegClass etc), but doesn't notify observers
(CSE in this case but this could be any other observer). In order to
make the Observer be available in various parts of code and to avoid
having to thread it through various API, the MachineFunction now has the
observer as field. This allows it to be easily used in helper functions
such as constrainOperandRegClass.
Also added some invariant verification method in CSEInfo which can
catch these issues (when CSE is enabled).
Like COPY instructions explained in D70616, we don't check the constraints
when combining G_UNMERGE_VALUES. Use the same logic used in D70616 to check
if registers can be replaced, or a COPY instruction needs to be built.
https://reviews.llvm.org/D70564
contractCrossBankCopyIntoStore() finds the instruction defines the
source register and uses its output to replace the register. There are,
however, instructions that have multiple outputs, e.g. G_UNMERGE_VALUES.
Current implementation hardcodes to operand 0 and has no way of knowing
which output should be used.
This change adds another function to directly return the register that
is the source of the register and use that for folding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44783
Differential Revision: https://reviews.llvm.org/D74005
As an intermediate step, some TLI functions can be converted to using
LLT instead of MVT. Move this somewhere out of GlobalISel so DAG
functions can use these.
Jay Foad