We already know that we need to check whether lcssa
phis are supported in inner loop exit block or in
outer loop exit block, and we have logic to check
them already. Presumably the inner loop latch does
not have lcssa phis and there is no code that deals
with lcssa phis in the inner loop latch. However,
that assumption is not true, when we have loops
with more than two-level nesting. This patch adds
checks for lcssa phis in the inner latch.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D102300
This patch fixes pr43326 and pr48212.
Currently when we move reduction phis to the right place,
loop interchange assumes the first phi in loop headers is
an induction phi, skips the first phi and assumes the rest
of phis are candidate reduction phis to move. However, it
may not always be the case.
This patch loops over all phis in loop headers and considers
a phi node as a candidate reduction phi to move only when it
is indeed a reduction phi across outer and inner loop.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D102743
This is a bugfix in the transformation phase.
If the original outer loop header branches to both the inner loop
(header) and the outer loop latch, and if there is an lcssa PHI
node outside the loop nest, then after interchange the new outer latch
will have an lcssa PHI node inserted which has two predecessors, i.e.,
the original outer header and the original outer latch. Currently
the transformation assumes it has only one predecessor (the original
outer latch) and crashes, since the inserted lcssa PHI node does
not take both predecessors as incoming BBs.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D100792
This is a bug fix in legality check.
When we encounter triangular loops such as the following form:
for (int i = 0; i < m; i++)
for (int j = 0; j < i; j++), or
for (int i = 0; i < m; i++)
for (int j = 0; j*i < n; j++),
we should not perform interchange since the number of executions
of the loop body will be different before and after interchange,
resulting in incorrect results.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D101305
This is a bug fix in legality check.
When we encounter triangular loops such as the following form:
for (int i = 0; i < m; i++)
for (int j = 0; j < i; j++), or
for (int i = 0; i < m; i++)
for (int j = 0; j*i < n; j++),
we should not perform interchange since the number of executions of the loop body
will be different before and after interchange, resulting in incorrect results.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D101305
After loop interchange, the (old) outer loop header should not jump to
the `LoopExit`. Note that the old outer loop becomes the new inner loop
after interchange. If we branched to `LoopExit` then after interchange
we would jump directly from the (new) inner loop header to `LoopExit`
without executing the rest of outer loop.
This patch modifies adjustLoopBranches() such that the old outer
loop header (which becomes the new inner loop header) jumps to the
old inner loop latch which becomes the new outer loop latch after
interchange.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D98475
After loop interchange, the (old) outer loop header should not jump to
`LoopExit`. Note that the old outer loop becomes the new inner loop
after interchange. If we branched to `LoopExit` then after interchange
we would jump directly from the (new) inner loop header to `LoopExit`
without executing the rest of (new) outer loop.
This patch modifies adjustLoopBranches() such that the old outer
loop header (which becomes the new inner loop header) jumps to the
old inner loop latch which becomes the new outer loop latch after
interchange.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D98475
This is yet another attempt to fix tightlyNested().
Add checks in tightlyNested() for the inner loop exit block,
such that 1) if there is control-flow divergence in between the inner
loop exit block and the outer loop latch, or 2) if the inner loop exit
block contains unsafe instructions, tightlyNested() returns false.
The reasoning behind is that after interchange, the original inner loop
exit block, which was part of the outer loop, would be put into the new
inner loop, and will be executed different number of times before and
after interchange. Thus it should be dealt with appropriately.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D98263
The check `tightlyNested()` in `LoopInterchange` is similar to the one in `LoopNest`.
In fact, the former misses some cases where loop-interchange is not feasible and results in incorrect behaviour.
Replacing it with the much robust version provided by `LoopNest` reduces code duplications and fixes https://bugs.llvm.org/show_bug.cgi?id=48113.
`LoopInterchange` has a weaker definition of tightly or perfectly nesting-ness than the one implemented in `LoopNest::arePerfectlyNested()`.
Therefore, `tightlyNested()` is instead implemented with `LoopNest::checkLoopsStructure` and additional checks for unsafe instructions.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D97290
This is the preliminary patch of converting `LoopInterchange` pass to a loop-nest pass and has no intended functional change.
Changes that are not loop-nest related are split to D96650.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D96644
This is a split patch of D96644.
Explicitly pass both `InnerLoop` and `OuterLoop` to function `processLoop` to remove the need to swap elements in loop list and allow making loop list an `ArrayRef`.
Also, fix inconsistent spellings of `OuterLoopId` and `Inner Loop Id` in debug log.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96650
In LoopInterchange, `findInnerReductionPhi()` looks for reduction
variables, which cannot be constants. Update it to return early in that
case.
This also addresses a blocker for removing use-lists from ConstantData,
whose users could be spread across arbitrary modules in the same
LLVMContext.
Differential Revision: https://reviews.llvm.org/D94712
Some older code - and code copied from older code - still directly tested against the singelton result of SE::getCouldNotCompute. Using the isa<SCEVCouldNotCompute> form is both shorter, and more readable.
Instructions defined in the original inner loop preheader may depend on
values defined in the outer loop header, but the inner loop header will
become the entry block in the loop nest. Move the instructions from the
preheader to the outer loop header, so we do not break dominance. We
also have to check for unsafe instructions in the preheader. If there
are no unsafe instructions, all instructions should be movable.
Currently we move all instructions except the terminator and rely on
LICM to hoist out invariant instructions later.
Fixes PR45743
Values defined in the outer loop header could be used in the inner loop
latch. In that case, we need to create LCSSA phis for them, because after
interchanging they will be defined in the new inner loop and used in the
new outer loop.
The PHI node checks for inner loop exits are too permissive currently.
As indicated by an existing comment, we should only allow LCSSA PHI
nodes that are part of reductions or are only used outside of the loop
nest. We ensure this by checking the users of the LCSSA PHIs.
Specifically, it is not safe to use an exiting value from the inner loop in the latch of the outer
loop.
It also moves the inner loop exit check before the outer loop exit
check.
Fixes PR43473.
Reviewers: efriedma, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D68144
Currently the assertion in updateSuccessor is overly strict in some
cases and overly relaxed in other cases. For branches to the inner and
outer loop preheader it is too strict, because they can either be
unconditional branches or conditional branches with duplicate targets.
Both cases are fine and we can allow updating multiple successors.
On the other hand, we have to at least update one successor. This patch
adds such an assertion.
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Currently we have limited support for outer loops with multiple basic
blocks after the inner loop exit. But the current checks for creating
PHIs for loop exit values only assumes the header and latches of the
outer loop. It is better to just skip incoming values defined in the
original inner loops. Those are handled earlier.
Reviewers: efriedma, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D70059
Currently we only rely on the induction increment to come before the
condition to ensure the required instructions get moved to the new
latch.
This patch duplicates and moves the required instructions to the
newly created latch. We move the condition to the end of the new block,
then process its operands. We stop at operands that are defined
outside the loop, or are the induction PHI.
We duplicate the instructions and update the uses in the moved
instructions, to ensure other users remain intact. See the added
test2 for such an example.
Reviewers: efriedma, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D67367
llvm-svn: 371595
The code to preserve LCSSA PHIs currently only properly supports
reduction PHIs and PHIs for values defined outside the latches.
This patch improves the LCSSA PHI handling to cover PHIs for values
defined in the latches.
Fixes PR41725.
Reviewers: efriedma, mcrosier, davide, jdoerfert
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D61576
llvm-svn: 361743
Summary:
This PR extends the loop object with more utilities to get loop bounds, step, induction variable, and guard branch. There already exists passes which try to obtain the loop induction variable in their own pass, e.g. loop interchange. It would be useful to have a common area to get these information. Moreover, loop fusion (https://reviews.llvm.org/D55851) is planning to use getGuard() to extend the kind of loops it is able to fuse, e.g. rotated loop with non-constant upper bound, which would have a loop guard.
/// Example:
/// for (int i = lb; i < ub; i+=step)
/// <loop body>
/// --- pseudo LLVMIR ---
/// beforeloop:
/// guardcmp = (lb < ub)
/// if (guardcmp) goto preheader; else goto afterloop
/// preheader:
/// loop:
/// i1 = phi[{lb, preheader}, {i2, latch}]
/// <loop body>
/// i2 = i1 + step
/// latch:
/// cmp = (i2 < ub)
/// if (cmp) goto loop
/// exit:
/// afterloop:
///
/// getBounds
/// getInitialIVValue --> lb
/// getStepInst --> i2 = i1 + step
/// getStepValue --> step
/// getFinalIVValue --> ub
/// getCanonicalPredicate --> '<'
/// getDirection --> Increasing
/// getGuard --> if (guardcmp) goto loop; else goto afterloop
/// getInductionVariable --> i1
/// getAuxiliaryInductionVariable --> {i1}
/// isCanonical --> false
Committed on behalf of @Whitney (Whitney Tsang).
Reviewers: kbarton, hfinkel, dmgreen, Meinersbur, jdoerfert, syzaara, fhahn
Reviewed By: kbarton
Subscribers: tvvikram, bmahjour, etiotto, fhahn, jsji, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60565
llvm-svn: 361517
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch adds logic to detect reductions across the inner and outer
loop by following the incoming values of PHI nodes in the outer loop. If
the incoming values take part in a reduction in the inner loop or come
from outside the outer loop, we found a reduction spanning across inner
and outer loop.
With this change, ~10% more loops are interchanged in the LLVM
test-suite + SPEC2006.
Fixes https://bugs.llvm.org/show_bug.cgi?id=30472
Reviewers: mcrosier, efriedma, karthikthecool, davide, hfinkel, dmgreen
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43245
llvm-svn: 346438
Inner-loop only reductions require additional checks to make sure they
form a load-phi-store cycle across inner and outer loop. Otherwise the
reduction value is not properly preserved. This patch disables
interchanging such loops for now, as it causes miscompiles in some
cases and it seems to apply only for a tiny amount of loops. Across the
test-suite, SPEC2000 and SPEC2006, 61 instead of 62 loops are
interchange with inner loop reduction support disabled. With
-loop-interchange-threshold=-1000, 3256 instead of 3267.
See the discussion and history of D53027 for an outline of how such legality
checks could look like.
Reviewers: efriedma, mcrosier, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D53027
llvm-svn: 345877
This patch turns LoopInterchange into a loop pass. It now only
considers top-level loops and tries to move the innermost loop to the
optimal position within the loop nest. By only looking at top-level
loops, we might miss a few opportunities the function pass would get
(e.g. if we have a loop nest of 3 loops, in the function pass
we might process loops at level 1 and 2 and move the inner most loop to
level 1, and then we process loops at levels 0, 1, 2 and interchange
again, because we now have a different inner loop). But I think it would
be better to handle such cases by picking the best inner loop from the
start and avoid re-visiting the same loops again.
The biggest advantage of it being a function pass is that it interacts
nicely with the other loop passes. Without this patch, there are some
performance regressions on AArch64 with loop interchanging enabled,
where no loops were interchanged, but we missed out on some other loop
optimizations.
It also removes the SimplifyCFG run. We are just changing branches, so
the CFG should not be more complicated, besides the additional 'unique'
preheaders this pass might create.
Reviewers: chandlerc, efriedma, mcrosier, javed.absar, xbolva00
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D51702
llvm-svn: 343308
This patch extends LoopInterchange to move LCSSA to the right place
after interchanging. This is required for LoopInterchange to become a
function pass.
An alternative to the manual moving of the PHIs, we could also re-form
the LCSSA phis for a set of interchanged loops, but that's more
expensive.
Reviewers: efriedma, mcrosier, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52154
llvm-svn: 343132
