As preparation for LoopInterchange becoming a loop pass, it needs to
preserve ScalarEvolution. Even though interchanging should not change
the trip count of the loop, it modifies loop entry, latch and exit
blocks.
I added -verify-scev to some loop interchange tests, but the verification does
not catch problems caused by missing invalidation of SE in loop interchange, as
the trip counts themselves do not change. So there might be potential to
make the SE verification covering more stuff in the future.
Reviewers: mkazantsev, efriedma, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52026
llvm-svn: 342209
There is no need to create preheaders in the analysis stage, we only
need them when adjusting the branches. Also, the only cases we need to
create our own preheaders is when they have more than 1 predecessors or
PHI nodes (even with only 1 predecessor, we could have an LCSSA phi
node). I have simplified the conditions and added some assertions to be
sure. Because we know the inner and outer loop need to be tightly
nested, it is sufficient to check if the inner loop preheader is the
outer loop header to check if we need to create a new preheader.
Reviewers: efriedma, mcrosier, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51703
llvm-svn: 341533
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This patch moves the logic to handle reduction PHI nodes to the end of
adjustLoopBranches. Reduction PHI nodes in the outer loop header can be
moved to the inner loop header and reduction PHI nodes from the inner loop
header can be moved to the outer loop header. In the latter situation,
we have to deal with 1 kind of PHI nodes:
PHI nodes that are part of inner loop-only reductions.
We can replace the PHI node with the value coming from outside
the inner loop.
Reviewers: mcrosier, efriedma, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D46198
llvm-svn: 335027
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
We currently support LCSSA PHI nodes in the outer loop exit, if their
incoming values do not come from the outer loop latch or if the
outer loop latch has a single predecessor. In that case, the outer loop latch
will be executed only if the inner loop gets executed. If we have multiple
predecessors for the outer loop latch, it may be executed even if the inner
loop does not get executed.
This is a first step to support the case described in
https://bugs.llvm.org/show_bug.cgi?id=30472
Reviewers: efriedma, karthikthecool, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43237
llvm-svn: 331037
This also means we have to check if the latch is the exiting block now,
as `transform` expects the latches to be the exiting blocks too.
https://bugs.llvm.org/show_bug.cgi?id=36586
Reviewers: efriedma, davide, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45279
llvm-svn: 330806
After D43236, we started interchanging loops with empty dependence
matrices. In isProfitableForVectorization, we try to determine if
interchanging makes the loop dependences more friendly to the
vectorizer. If there are no dependences, we should not interchange,
based on that heuristic.
Reviewers: efriedma, mcrosier, karthikthecool, blitz.opensource
Reviewed By: mcrosier
Differential Revision: https://reviews.llvm.org/D45208
llvm-svn: 330738
If a loop with child loops becomes our new inner loop after
interchanging, we only need to update LoopInfo for the blocks defined in
the old outer loop. BBs in child loops will stay there.
Reviewers: efriedma, karthikthecool, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45970
llvm-svn: 330653
LoopInterchange relies on LoopInfo being up-to-date, so we should
preserve it after interchanging. This patch updates restructureLoops to
move the BBs of the interchanged loops to the right place.
Reviewers: davide, efriedma, karthikthecool, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45278
llvm-svn: 329264
It also updates test/Transforms/LoopInterchange/call-instructions.ll
to use accesses where we can prove dependence after D35430.
Reviewers: sebpop, karthikthecool, blitz.opensource
Reviewed By: sebpop
Differential Revision: https://reviews.llvm.org/D45206
llvm-svn: 329111
It's been quite some time the Dependence Analysis (DA) is broken,
as it uses the GEP representation to "identify" multi-dimensional arrays.
It even wrongly detects multi-dimensional arrays in single nested loops:
from test/Analysis/DependenceAnalysis/Coupled.ll, example @couple6
;; for (long int i = 0; i < 50; i++) {
;; A[i][3*i - 6] = i;
;; *B++ = A[i][i];
DA used to detect two subscripts, which makes no sense in the LLVM IR
or in C/C++ semantics, as there are no guarantees as in Fortran of
subscripts not overlapping into a next array dimension:
maximum nesting levels = 1
SrcPtrSCEV = %A
DstPtrSCEV = %A
using GEPs
subscript 0
src = {0,+,1}<nuw><nsw><%for.body>
dst = {0,+,1}<nuw><nsw><%for.body>
class = 1
loops = {1}
subscript 1
src = {-6,+,3}<nsw><%for.body>
dst = {0,+,1}<nuw><nsw><%for.body>
class = 1
loops = {1}
Separable = {}
Coupled = {1}
With the current patch, DA will correctly work on only one dimension:
maximum nesting levels = 1
SrcSCEV = {(-2424 + %A)<nsw>,+,1212}<%for.body>
DstSCEV = {%A,+,404}<%for.body>
subscript 0
src = {(-2424 + %A)<nsw>,+,1212}<%for.body>
dst = {%A,+,404}<%for.body>
class = 1
loops = {1}
Separable = {0}
Coupled = {}
This change removes all uses of GEP from DA, and we now only rely
on the SCEV representation.
The patch does not turn on -da-delinearize by default, and so the DA analysis
will be more conservative in the case of multi-dimensional memory accesses in
nested loops.
I disabled some interchange tests, as the DA is not able to disambiguate
the dependence anymore. To make DA stronger, we may need to
compute a bound on the number of iterations based on the access functions
and array dimensions.
The patch cleans up all the CHECKs in test/Transforms/LoopInterchange/*.ll to
avoid checking for snippets of LLVM IR: this form of checking is very hard to
maintain. Instead, we now check for output of the pass that are more meaningful
than dozens of lines of LLVM IR. Some tests now require -debug messages and thus
only enabled with asserts.
Patch written by Sebastian Pop and Aditya Kumar.
Differential Revision: https://reviews.llvm.org/D35430
llvm-svn: 326837
The dependency matrix is only empty if no conflicting load/store
instructions have been found. In that case, it is safe to interchange.
For the LLVM test-suite, after this change around 1900 loops are
interchanged, whereas it is 15 before this change. On cortex-a57,
this gives an improvement of -0.57% on the geomean execution
time of SPEC2006, SPEC2000 and the test-suite. There are a
few small perf regressions, but I think we can improve on those
by making the cost model better.
Reviewers: karthikthecool, mcrosier
Reviewed by: karthikthecool
Differential Revision: https://reviews.llvm.org/D43236
llvm-svn: 326077
We can use incremental dominator tree updates to avoid re-calculating
the dominator tree after interchanging 2 loops.
Reviewers: dmgreen, kuhar
Reviewed By: kuhar
Differential Revision: https://reviews.llvm.org/D43176
llvm-svn: 325122
In cases where the OuterMostLoopLatchBI only has a single successor,
accessing the second successor will fail.
This fixes a failure when building the test-suite with loop-interchange
enabled.
Reviewers: mcrosier, karthikthecool, davide
Reviewed by: karthikthecool
Differential Revision: https://reviews.llvm.org/D42906
llvm-svn: 324994
The way that splitInnerLoopHeader splits blocks requires that
the induction PHI will be the first PHI in the inner loop
header. This makes sure that is actually the case when there
are both IV and reduction phis.
Differential Revision: https://reviews.llvm.org/D38682
llvm-svn: 316261
parameterized emit() calls
Summary: This is not functional change to adopt new emit() API added in r313691.
Reviewed By: anemet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38285
llvm-svn: 315476
Summary:
SimplifyIndVar may introduce zext instructions to widen arguments of the
loop exit check. They should not prevent us from splitting the loop at
the induction variable, but maybe the check should be more conservative,
e.g. making sure it only extends arguments used by a comparison?
Reviewers: karthikthecool, mcrosier, mzolotukhin
Reviewed By: mcrosier
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D34879
llvm-svn: 311783
Summary:
Without any information about the called function, we cannot be sure
that it is safe to interchange loops which contain function calls. For
example there could be dependences that prevent interchanging between
accesses in the called function and the loops. Even functions without any
parameters could cause problems, as they could access memory using
global pointers.
For now, I think it is only safe to interchange loops with calls marked
as readnone.
With this patch, the LLVM test suite passes with `-O3 -mllvm
-enable-loopinterchange` and LoopInterchangeProfitability::isProfitable
returning true for all loops. check-llvm and check-clang also pass when
bootstrapped in a similar fashion, although only 3 loops got
interchanged.
Reviewers: karthikthecool, blitz.opensource, hfinkel, mcrosier, mkuper
Reviewed By: mcrosier
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35489
llvm-svn: 309547
Summary:
The remaining non range-based for loops do not iterate over full ranges,
so leave them as they are.
Reviewers: karthikthecool, blitz.opensource, mcrosier, mkuper, aemerson
Reviewed By: aemerson
Subscribers: aemerson, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35777
llvm-svn: 308872
Summary: This makes it easier to find out which limitation prevented this pass from doing its work.
Reviewers: karthikthecool, mzolotukhin, efriedma, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D34940
llvm-svn: 307035
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
This condition is trivially always true prior to the change. The comment
at the call site makes it clear that we expect *all* of these to be '=',
'S', or 'I' so fix the code.
We have a bug I will update to track the fact that Clang doesn't warn on
this: http://llvm.org/PR13101
llvm-svn: 285930
Currently, we give up on loop interchange if we encounter a flow dependency
anywhere in the loop list. Worse yet, we don't even track output dependencies.
This patch updates the dependency matrix computation to track flow and output
dependencies in the same way we track anti dependencies.
This improves an internal workload by 2.2x.
Note the loop interchange pass is off by default and it can be enabled with
'-mllvm -enable-loopinterchange'
Differential Revision: https://reviews.llvm.org/D24564
llvm-svn: 282101
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
llvm-svn: 276554
