This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
llvm-svn: 335152
Using OrderedInstructions::dominates as comparator for instructions in
BBs without dominance relation can cause a non-deterministic order
between such instructions. That in turn can cause us to materialize
copies in a non-deterministic order. While this does not effect
correctness, it causes some minor non-determinism in the final generated
code, because values have slightly different labels.
Without this patch, running -print-predicateinfo on a reasonably large
module produces slightly different output on each run.
This patch uses the dominator trees DFSInNum to order instruction from
different BBs, which should enforce a deterministic ordering and
guarantee that dominated instructions come after the instructions that
dominate them.
Reviewers: dberlin, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D48230
llvm-svn: 335150
Summary:
Due to uniqueing of DICompositeTypes, it's possible for a type from one
module to be loaded into another earlier module without being renamed.
Then when the defining module is being IRMoved, the type can be used as
a Mapping destination before being loaded, such that when it's requested
using TypeMapTy::get() it will fail with an assertion that the type is a
source type when it's actually a type in both the source and
destination modules. Correctly handle that case by allowing a non-opaque
non-literal struct type be present in both modules.
Fix for PR37684.
Reviewers: pcc, tejohnson
Reviewed By: pcc, tejohnson
Subscribers: tobiasvk, mehdi_amini, steven_wu, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D47898
llvm-svn: 335145
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
llvm-svn: 335144
Summary:
Found some regressions (infinite loop in DAGTypeLegalizer::RemapId)
after r334880. This patch makes sure that we do map a TableId to
itself.
Reviewers: niravd
Reviewed By: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48364
llvm-svn: 335141
Summary:
The waterfall no longer builds .s files and no longers uses
the wasm-o when it builds object files.
Subscribers: dschuff, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48371
llvm-svn: 335135
This is part of a move towards generalizing the alternate opcode mechanism and not just supporting (F)Add/(F)Sub counterparts.
The patch embeds the AltOpcode in the InstructionsState instead of calling getAltOpcode so often.
I'm hoping to eventually remove all uses of getAltOpcode and handle alternate opcode selection entirely within getSameOpcode, that will require us to use InstructionsState throughout the BoUpSLP call hierarchy (similar to some of the changes in D28907), which I will begin in future patches.
Differential Revision: https://reviews.llvm.org/D48359
llvm-svn: 335134
D47985 saw the old SK_Alternate 'alternating' shuffle mask replaced with the SK_Select mask which accepts either input operand for each lane, equivalent to a vector select with a constant condition operand.
This patch updates SLPVectorizer to make full use of this SK_Select shuffle pattern by removing the 'isOdd()' limitation.
The AArch64 regression will be fixed by D48172.
Differential Revision: https://reviews.llvm.org/D48174
llvm-svn: 335130
For both operands are unsigned, the following optimizations are valid, and missing:
1. X > Y && X != 0 --> X > Y
2. X > Y || X != 0 --> X != 0
3. X <= Y || X != 0 --> true
4. X <= Y || X == 0 --> X <= Y
5. X > Y && X == 0 --> false
unsigned foo(unsigned x, unsigned y) { return x > y && x != 0; }
should fold to x > y, but I found we haven't done it right now.
besides, unsigned foo(unsigned x, unsigned y) { return x < y && y != 0; }
Has been folded to x < y, so there may be a bug.
Patch by: Li Jia He!
Differential Revision: https://reviews.llvm.org/D47922
llvm-svn: 335129
These are the baseline tests for the functional change in D47922.
Patch by Li Jia He!
Differential Revision: https://reviews.llvm.org/D48000
llvm-svn: 335128
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335127
Summary:
This is useful when hash collisions are unlikely and acceptable, e.g. in clangd
completion ranking.
Reviewers: ioeric
Subscribers: ilya-biryukov, llvm-commits
Differential Revision: https://reviews.llvm.org/D48361
llvm-svn: 335125
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335120
Thumb has more 16-bit encoding space dedicated to ADD than ORR, allowing both a
3-address encoding and a wider range of immediates. So, particularly when
optimizing for code size (but it doesn't make things worse elsewhere) it's
beneficial to select an OR operation to an ADD if we know overflow won't occur.
This is made even better by LLVM's penchant for putting operations in canonical
form by converting the other way.
llvm-svn: 335119
This patch teaches llvm-mca how to identify register writes that implicitly zero
the upper portion of a super-register.
On X86-64, a general purpose register is implemented in hardware as a 64-bit
register. Quoting the Intel 64 Software Developer's Manual: "an update to the
lower 32 bits of a 64 bit integer register is architecturally defined to zero
extend the upper 32 bits". Also, a write to an XMM register performed by an AVX
instruction implicitly zeroes the upper 128 bits of the aliasing YMM register.
This patch adds a new method named clearsSuperRegisters to the MCInstrAnalysis
interface to help identify instructions that implicitly clear the upper portion
of a super-register. The rest of the patch teaches llvm-mca how to use that new
method to obtain the information, and update the register dependencies
accordingly.
I compared the kernels from tests clear-super-register-1.s and
clear-super-register-2.s against the output from perf on btver2. Previously
there was a large discrepancy between the estimated IPC and the measured IPC.
Now the differences are mostly in the noise.
Differential Revision: https://reviews.llvm.org/D48225
llvm-svn: 335113
This fixes compilation with MinGW after SVN r333798, which added
a few functions within _WIN32 ifdefs, functions returning
std::error_code. Include everything that is needed instead of
hoping that this header being inclued transitively (which it apparently
is in MSVC builds).
llvm-svn: 335107
Summary: Introducing a Prototype object to capture Variables that must be set but keeps degrees of freedom as Invalid. This allows exploring non constraint variables later on.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D48316
llvm-svn: 335105
Summary:
Related to https://bugs.llvm.org/show_bug.cgi?id=37793, https://reviews.llvm.org/D46760#1127287
We'd like to do this canonicalization https://rise4fun.com/Alive/Gmc
But it is currently restricted by rL155136 / rL155362, which says:
```
// This is a constant shift of a constant shift. Be careful about hiding
// shl instructions behind bit masks. They are used to represent multiplies
// by a constant, and it is important that simple arithmetic expressions
// are still recognizable by scalar evolution.
//
// The transforms applied to shl are very similar to the transforms applied
// to mul by constant. We can be more aggressive about optimizing right
// shifts.
//
// Combinations of right and left shifts will still be optimized in
// DAGCombine where scalar evolution no longer applies.
```
I think these tests show that for *constants*, SCEV has no issues with that canonicalization.
Reviewers: mkazantsev, spatel, efriedma, sanjoy
Reviewed By: mkazantsev
Subscribers: sanjoy, javed.absar, llvm-commits, stoklund, bixia
Differential Revision: https://reviews.llvm.org/D48229
llvm-svn: 335101
Summary:
First off: i do not have any access to that processor,
so this is purely theoretical, no benchmarks.
I have been looking into b**d**ver2 scheduling profile, and while cross-referencing
the existing b**t**ver2, znver1 profiles, and the reference docs
(`Software Optimization Guide for AMD Family {15,16,17}h Processors`),
i have noticed that only b**t**ver2 scheduling profile specifies these.
Also, there is no mca test coverage.
Reviewers: RKSimon, craig.topper, courbet, GGanesh, andreadb
Reviewed By: GGanesh
Subscribers: gbedwell, vprasad, ddibyend, shivaram, Ashutosh, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D47676
llvm-svn: 335099
Summary:
I ran llvm-exegesis on SKX, SKL, BDW, HSW, SNB.
Atom is from Agner and SLM is a guess.
I've left AMD processors alone.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48079
llvm-svn: 335097
The clang test inadvertently turned a floating point value into a double by having the wrong return type on the test function relative to the intrinsic it was testing.
This resulted in an extra fptosi instruction that propagated into this test when I copied the clang output.
llvm-svn: 335094
Summary:
If we get an error building the SelectionDAG for inline assembly we try to continue and still build the DAG.
But if the return type for the inline assembly is a struct we end up crashing because we try to create an UNDEF node with a struct type which isn't valid.
Instead we need to create an UNDEF for each element of the struct and join them with merge_values.
This patch relies on single operand merge_values being handled gracefully by getMergeValues. If the return type is void there will be no VTs returned by ComputeValueVTs and now we just return instead of calling setValue. Hopefully that's ok, I assumed nothing would need to look up the mapped value for void node.
Fixes PR37359
Reviewers: rengolin, rovka, echristo, efriedma, bogner
Reviewed By: efriedma
Subscribers: craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D46560
llvm-svn: 335093
Summary:
After r335018, the static tables are guaranteed sorted by the EVEX opcode to convert. We can use this to do a binary search and remove the need for any secondary data structures.
Right now one table is 736 entries and the other is 482 entries. It might make sense to merge the two tables as a follow up. The effort it takes to select the table is probably similar to the extra binary search step it would require for a larger table.
I haven't done any measurements to see if this has any effect on compile time, but I don't imagine that EVEX->VEX conversion is a place we spend a lot of time.
Reviewers: RKSimon, spatel, chandlerc
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48312
llvm-svn: 335092
This patch introduces two helpers to make it easier to ignore debug
intrinsics:
- Instruction::getNextNonDebugInstruction()
This is just like Instruction::getNextNode(), except that it skips debug
info.
- skipDebugInfo(BasicBlock::iterator)
A free function which advances a BasicBlock iterator past any debug
info. This is a no-op when the iterator already points to a non-debug
instruction.
Part of: llvm.org/PR37728
Related to: https://reviews.llvm.org/D47874
Differential Revision: https://reviews.llvm.org/D48305
llvm-svn: 335083
This patch covers up a fairly fundemental issue around remat and register allocation which shows up with psuedo instructions with more vreg uses than there are physical registers. This patch essentially just disables remat for STATEPOINTs which are the only case we've seen so far, but long term we need a better fix.
For STATEPOINTs specifically, this is a strict improvement. It unblocks progress towards enabling a currently off-by-default mode which integrates deopt bundle operand lowering with register allocator spilling so that we end up with smaller stack sizes and more optimally placed spills. Assming no other issues turn up during my next round of integration testing - which based on experience so far, is admittedly unlikely - we might finally be able to enable something I've been working towards in small bits and pieces for years now. :)
For psuedo ops in general, there are a couple of ideas for a "proper fix" discussed on the bug, but I'm far enough outside my knowledge area to not be able to see any of them through to a successful conclusion. If anyone wants to help out here, please do.
Differential Revision: https://reviews.llvm.org/D41098
llvm-svn: 335077
insertOutlinerPrologue was not used by any target, and prologue-esque code was
beginning to appear in insertOutlinerEpilogue. Refactor that into one function,
buildOutlinedFrame.
This just removes insertOutlinerPrologue and renames insertOutlinerEpilogue.
llvm-svn: 335076
