Before printing the block reciprocal throughput, ensure that the floating point
number is always rounded the same way on every target.
No functional change intended.
llvm-svn: 333210
This commit adds a color category so tools can document this option and
enables it for dwarfdump and dsymuttil.
rdar://problem/40498996
llvm-svn: 333176
This is a small follow-up to the revisions r333117 and r331663.
1. Avoid the name conflicts of the generated variables for prefixes.
2. Apply clang-format -i -style=llvm to llvm-objcopy.cpp once again.
3. Add a test for the flag with double dash.
Test plan: make check-all
llvm-svn: 333120
This patch implements the "block reciprocal throughput" computation in the
SummaryView.
The block reciprocal throughput is computed as the MAX of:
- NumMicroOps / DispatchWidth
- Resource Cycles / #Units (for every resource consumed).
The block throughput is bounded from above by the hardware dispatch throughput.
That is because the DispatchWidth is an upper bound on how many opcodes can be part
of a single dispatch group.
The block throughput is also limited by the amount of hardware parallelism. The
number of available resource units affects how the resource pressure is
distributed, and also how many blocks can be delivered every cycle.
llvm-svn: 333095
Summary:
This is an intermediate change, it moves the non-notification logic from
Backend::notifyCycleBegin to runCycle().
Once the scheduler becomes part of the Execution stage
the explicit call to Scheduler::cycleEvent will disappear.
The logic for Dispatch::cycleEvent() can be in
the preExecute phase, which this patch addresses.
Reviewers: andreadb, RKSimon, courbet
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47213
llvm-svn: 333029
If one runs llvm-objcopy --strip-all --keep-symbol foo
and the symbol table indeed contains the symbol "foo"
then it should not be removed.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D47052
llvm-svn: 333008
Summary: This makes the report much more readable.
Reviewers: gchatelet
Subscribers: tschuett, mgrang, craig.topper, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D47189
llvm-svn: 332979
Also clean up a couple of hacks where we were writing the section
contents to another stream by setting the object writer's stream,
writing and setting it back.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47038
llvm-svn: 332858
Summary: Add LLVMDIBuilderCreateObjCIVar, LLVMDIBuilderCreateObjCProperty, and LLVMDIBuilderCreateInheritance to allow declaring metadata for Objective-C class hierarchies and their associated properties and instance variables.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: harlanhaskins, llvm-commits
Differential Revision: https://reviews.llvm.org/D47123
llvm-svn: 332850
Change the "recoverable" error callback to take an Error instaed of a
string.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D46831
llvm-svn: 332845
Summary: Add wrappers for a module's alias iterators and a getter and setter for the aliasee value.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46808
llvm-svn: 332826
Summary:
- Provide LLVMGetValueName2 and LLVMSetValueName2 that return and take the length of the provided C string respectively
- Deprecate LLVMGetValueName and LLVMSetValueName
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46890
llvm-svn: 332810
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Summary:
The logic of dispatch remains the same, but now DispatchUnit is a Stage (DispatchStage).
This change has the benefit of simplifying the backend runCycle() code.
The same logic applies, but it belongs to different components now. This is just a start,
eventually we will need to remove the call to the DispatchStage in Scheduler.cpp, but
that will be a separate patch. This change is mostly a renaming and moving of existing logic.
This change also encouraged me to remove the Subtarget (STI) member from the
Backend class. That member was used to initialize the other members of Backend
and to eventually call DispatchUnit::dispatch(). Now that we have Stages, we
can eliminate this by instantiating the DispatchStage with everything it needs
at the time of construction (e.g., Subtarget). That change allows us to call
DispatchStage::execute(IR) as we expect to call execute() for all other stages.
Once we add the Stage list (D46907) we can more cleanly call preExecute() on
all of the stages, DispatchStage, will probably wrap cycleEvent() in that
case.
Made some formatting and minor cleanups to README.txt. Some of the text
was re-flowed to stay within 80 cols.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb, courbet
Subscribers: mgorny, javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46983
llvm-svn: 332652
Currently debugify prints it's output to stdout,
with this patch all the output generated goes to stderr.
This change lets us use debugify without taking away
the ability to pipe the output to other llvm tools.
llvm-svn: 332642
Summary:
Warn on instructions that should have the same performance
characteristics according to the sched model but actually
differ in their benchmarks.
Next step: Make the display nicer to browse, I was thinking maybe html.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D46945
llvm-svn: 332601
Restructuring the code to measure latency and uops.
The end goal is to have this program spawn another process to deal with SIGILL and other malformed programs. It is not yet the case in this redesign, it is still the main program that runs the code (and may crash).
It now uses BitVector instead of Graph for performance reasons.
https://reviews.llvm.org/D46821
(with fixed ARM tests)
Authored by Guillaume Chatelet
llvm-svn: 332592
Restructuring the code to measure latency and uops.
The end goal is to have this program spawn another process to deal with SIGILL and other malformed programs. It is not yet the case in this redesign, it is still the main program that runs the code (and may crash).
It now uses BitVector instead of Graph for performance reasons.
https://reviews.llvm.org/D46821
Authored by Guillaume Chatelet
llvm-svn: 332579
Fuchsia uses ELF as a file format and LLD as the linker so we can
use the same implementation as other ELF based platforms.
Differential Revision: https://reviews.llvm.org/D46991
llvm-svn: 332570
VSOs now track dependencies for materializing symbols. Each symbol must have its
dependencies registered with the VSO prior to finalization. Usually this will
involve registering the dependencies returned in
AsynchronousSymbolQuery::ResolutionResults for queries made while linking the
symbols being materialized.
Queries against symbols are notified that a symbol is ready once it and all of
its transitive dependencies are finalized, allowing compilation work to be
broken up and moved between threads without queries returning until their
symbols fully safe to access / execute.
Related utilities (VSO, MaterializationUnit, MaterializationResponsibility) are
updated to support dependence tracking and more explicitly track responsibility
for symbols from the point of definition until they are finalized.
llvm-svn: 332541
Summary: This change will help us turn the DispatchUnit into its own stage.
Reviewers: andreadb, RKSimon, courbet
Reviewed By: andreadb, courbet
Subscribers: mgorny, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46916
llvm-svn: 332493
The module ID numbering typically starts at 0 (in both the new and old
LTO APIs, used by linkers). Make llvm-lto consistent with that.
Split out of D46699.
llvm-svn: 332476
Revision 332390 introduced a FetchStage class in llvm-mca.
By design, FetchStage owns all the instructions in-flight in the OoO Backend.
Before this change, new instructions were added to a DenseMap indexed by
instruction id. The problem with using a DenseMap is that elements are not
ordered by key. This was causing a massive slow down in method
FetchStage::postExecute(), which searches for instructions retired that can be
deleted.
This patch replaces the DenseMap with a std::map ordered by instruction index.
At the end of every cycle, we search for the first instruction which is not
marked as "retired", and we remove all the previous instructions before it.
This works well because instructions are retired in-order.
Before this patch, a debug build of llvm-mca (on my Ryzen linux machine) took
~8.0 seconds to simulate 3000 iterations of a x86 dot-product (a `vmulps,
vpermilps, vaddps, vpermilps, vaddps` sequence). With this patch, it now takes
~0.8s to run all the 3000 iterations.
llvm-svn: 332461
This option just keeps being a problem and really needs to be implemented
in some fashion. Implementing it properly requires some kind of
"replaceSectionReference" method because all the existing links need to be
maintained. The desired behavior is just for allocated sections to become
NOBITS but actually implementing that is rather tricky due to the current
design of llvm-objcopy. However converting allocated sections to NOBITS is
just an optimization and not something debuggers need. Debuggers can debug
a stripped executable and take an unstripped executable for that stripped
executable as input. Additionally allocated sections account for a very
small part of debug binaries so this optimization is quite small. I propose
that for the time being we implement this as a NOP so that people can use
llvm-objcopy where they need to, just in a sub-optimal way.
This option has already blocked a lot of people and its currently blocking me.
llvm-svn: 332396
Summary:
This is just an idea, really two ideas. I expect some push-back,
but I realize that posting a diff is the most comprehensive way to express
these concepts.
This patch introduces a Stage class which represents the
various stages of an instruction pipeline. As a start, I have created a simple
FetchStage that is based on existing logic for how MCA produces
instructions, but now encapsulated in a Stage. The idea should become more concrete
once we introduce additional stages. The idea being, that when a stage completes,
the next stage in the pipeline will be executed. Stages are chained together
as a singly linked list to closely model a real pipeline. For now there is only one stage,
so the stage-to-stage flow of instructions isn't immediately obvious.
Eventually, Stage will also handle event notifications, but that functionality
is not complete, and not destined for this patch. Ideally, an interested party
can register for notifications from a particular stage. Callbacks will be issued to
these listeners at various points in the execution of the stage.
For now, eventing functionality remains similar to what it has been in mca::Backend.
We will be building-up the Stage class as we move on, such as adding debug output.
This patch also removes the unique_ptr<Instruction> return value from
InstrBuilder::createInstruction. An Instruction pointer is still produced,
but now it's up to the caller to decide how that item should be managed post-allocation
(e.g., smart pointer). This allows the Fetch stage to create instructions and
manage the lifetime of those instructions as it wishes, and not have to be bound to any
specific managed pointer type. Other callers of createInstruction might have different
requirements, and thus can manage the pointer to fit their needs. Another idea would be to push the
ownership to the RCU.
Currently, the FetchStage will wrap the Instruction
pointer in a shared_ptr. This allows us to remove the Instruction container in
Backend, which was probably going to disappear, or move, at some point anyways.
Note that I did run these changes through valgrind, to make sure we are not leaking
memory. While the shared_ptr comes with some additional overhead it relieves us
from having to manage a list of generated instructions, and/or make lookup calls
to remove the instructions.
I realize that both the Stage class and the Instruction pointer management
(mentioned directly above) are separate but related ideas, and probably should
land as separate patches; I am happy to do that if either idea is decent.
The main reason these two ideas are together is that
Stage::execute() can mutate an InstRef. For the fetch stage, the InstRef is populated
as the primary action of that stage (execute()). I didn't want to change the Stage interface
to support the idea of generating an instruction. Ideally, instructions are to
be pushed through the pipeline. I didn't want to draw too much of a
specialization just for the fetch stage. Excuse the word-salad.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: llvm-commits, mgorny, javed.absar, tschuett, gbedwell
Differential Revision: https://reviews.llvm.org/D46741
llvm-svn: 332390
This option permits to explicitly keep the specified
symbol so that it doesn't get removed.
Differential Revision: https://reviews.llvm.org/D46819
llvm-svn: 332356
Summary:
AsmTemplate becomes IntructionBenchmarkKey, which has three components.
This allows retreiving the opcode for analysis.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D46873
llvm-svn: 332348
Summary:
The analysis mode gives the user a clustered view of the measurement results.
Next steps are (requires the split ok AsmTemplate.Name into {mnemonic, mode}):
- Show the sched class.
- Highlight any inconsistencies with the checked-in data.
Reviewers: gchatelet
Subscribers: mgorny, llvm-commits, tschuett
Differential Revision: https://reviews.llvm.org/D46865
llvm-svn: 332344
Strictly speaking, this is not necessary for .cpp files. However, other .cpp
files from this same tool have it. This also matches what we do in other tools.
llvm-svn: 332334
Summary: Arm does not have a ret code per se.
Reviewers: gchatelet
Subscribers: mgorny, javed.absar, kristof.beyls, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D45672
llvm-svn: 332331
Most of the handling is pretty straightforward; fetch the default
memory flags for the specific resource type before parsing the flags
and apply them on top of that, except that some flags imply others
and some flags clear more than one flag.
For icons and cursors, the flags set get passed on to all individual
single icon/cursor resources, while only some flags affect the icon/cursor
group resource.
For stringtables, the behaviour is pretty simple; the first stringtable
resource of a bundle sets the flags for the whole bundle.
The output of these tests match rc.exe byte for byte.
The actual use of these memory flags is deprecated and they have no
effect since Win16, but some resource script files may still happen
to have them in place.
Differential Revision: https://reviews.llvm.org/D46818
llvm-svn: 332329
Previously these fields were only read from this header for cursors,
while Planes was hardcoded to 1 for icons (with a comment that it was
unknown why this was needed) and BitCount was left at the value
read originally in the RESDIRENTRY.
This fixes the single byte that was differing for the icon/cursor test
compared to rc.exe.
This is based on research/testing by Nico Weber.
Differential Revision: https://reviews.llvm.org/D46816
llvm-svn: 332328
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
llvm-svn: 332312
Change relocation output so that relocation information follows
individual instructions rather than clustering them at the end
of packets.
This change required shifting block of code but the actual change
is in HexagonPrettyPrinter's PrintInst.
Differential Revision: https://reviews.llvm.org/D46728
llvm-svn: 332283
The tool assumes that a zero-latency instruction that doesn't consume hardware
resources is an optimizable dependency-breaking instruction. That means, it
doesn't have to wait on register input operands, and it doesn't consume any
physical register. The PRF knows how to optimize it at register renaming stage.
llvm-svn: 332249
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
comparison of integers of different signs: 'const unsigned long' and 'const int' [-Werror,-Wsign-compare]
unittests/tools/llvm-exegesis/BenchmarkResultTest.cpp:60:5: note: in instantiation of function template specialization 'testing::internal::EqHelper<false>::Compare<unsigned long, int>' requested here
ASSERT_EQ(FromDiskVector.size(), 1);
llvm-svn: 332230
The analysis mode gives the user a clustered view of the measurement results and
highlights any inconsistencies with the checked-in data.
llvm-svn: 332229
Summary:
The first foray into merging debug info into the echo tests.
- Add bindings to Module::getModuleFlagsMetadata() in the form of LLVMCopyModuleFlagsMetadata
- Add the opaque type LLVMModuleFlagEntry to represent Module::ModuleFlagEntry
- Add accessors for LLVMModuleFlagEntry's behavior, key, and metadata node.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: aprantl, JDevlieghere, llvm-commits, harlanhaskins
Differential Revision: https://reviews.llvm.org/D46792
llvm-svn: 332219
Summary:
InitLLVM already calls llvm_shutdown, but llc registers for shutdown
with llvm_shutdown_obj so it gets called twice. It's not hurting anything, but
it's also not useful, so don't do it.
Reviewers: ruiu
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46788
llvm-svn: 332174
This diff adds support for -remove-section to llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46567
llvm-svn: 332081
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
When preprocessing resource scripts (which can easily be done outside
of llvm-rc), included headers can leave behind C declarations (despite
preprocessing with -DRC_INVOKED), that can't be parsed by a resource
compiler.
This is handled in all of rc.exe, by parsing the preprocessor output
line markers and ignoring content from files named *.h and *.c,
documented at [1].
In addition to this filtering, strip out any other preprocessor directive
that is left behind (like pragmas) which also can't be handled by the
tokenizer.
The added test uses both standard #line markers (supported by rc.exe) and
GNU style extended line markers, thus this test doesn't pass with rc.exe,
but passes with GNU windres. (Windres on the other hand doesn't filter
out files named *.c, only *.h.)
Differential Revision: https://reviews.llvm.org/D46579
[1] https://msdn.microsoft.com/en-us/library/windows/desktop/aa381033(v=vs.85).aspx
llvm-svn: 331903
This is the same as any other user defined resource, but with
a specific allocated resource type number.
Differential Revision: https://reviews.llvm.org/D46636
llvm-svn: 331902
-1 is commonly used as ID for controls that one don't want to
refer to later. For DIALOG resources, the IDs are 16 bit numbers,
and -1 gets interpreted as UINT32_MAX earlier, which then later is
too large to write into a uint16_t.
Differential Revision: https://reviews.llvm.org/D46506
llvm-svn: 331901
Set the exit code to 1 if no arguments are specified.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46547
llvm-svn: 331776
Regardless of what docs may say, existing resource files in the
wild can use this syntax.
Rename a file used in an existing test, to make it usable for unquoted
paths.
Differential Revision: https://reviews.llvm.org/D46511
llvm-svn: 331747
Normally when writing something that requires padding, we first
measure the length of the written payload data, then write
padding if necessary.
For a recursive structure like versioninfo, this means that the
padding is excluded from the size of the inner element, but
included in the size of the enclosing block.
Rc.exe excludes the final padding (but not the padding of earlier
children) from all levels of the hierarchy.
To achieve this, don't pad after each block or value, but only
before starting the next one. We still pad after completing the
toplevel versioninfo resource, so this won't affect other resource
types.
Differential Revision: https://reviews.llvm.org/D46510
llvm-svn: 331668
llvm-strip is supposed to be a drop-in replacement for binutils strip.
To start the ball rolling this diff adds the initial bits for llvm-strip,
more features will be added incrementally over time.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46407
llvm-svn: 331663
Summary:
This patch eliminates many places where we originally needed to pass index
values to represent an instruction. The index is still used as a key, in various parts of
MCA. I'm not comfortable eliminating the index just yet. By burying the index in
the instruction, we can avoid exposing that value in many places.
Eventually, we should consider removing the Instructions list in the Backend
all together, it's only used to hold and reclaim the memory for the allocated
Instruction instances. Instead we could pass around a smart pointer. But that's
a separate discussion/patch.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: javed.absar, tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46367
llvm-svn: 331660
This patch also improves the description of a couple of flags in the view
options. With this change, the -help now specifies which views are enabled by
default.
llvm-svn: 331594
Summary:
Set setDiagnosticsHotnessRequested before the early exit check for a
diagnostic output file, so that pass remarks with hotness works when
emitting pass remarks to stderr (e.g. via -pass-remarks=.).
Also fix the llvm-lto2 diagnistic handler so that it only calls exit(1)
when the diagnistic is an error type. Otherwise the new test invocation
of llvm-lto2 with -pass-remarks causes it to fail. The new code is
consistent with the diagnostic handler elsewhere (e.g. on the
LLVMContext).
Reviewers: pcc, davide
Subscribers: fhahn, mehdi_amini, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D46387
llvm-svn: 331569
Summary:
This change makes the TimelineView source simpler to read and easier to modify in the future.
This patch introduces a class of static chars used as the display values in the TimelineView report, this change just eliminates a few magic characters.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46409
llvm-svn: 331540
Previously we were emitting the "cooked" alignment, which made it hard
to distinguish between that and the default alignment.
Differential Revision: https://reviews.llvm.org/D46418
llvm-svn: 331537
Only support UTF-8 (since LLVM contains UTF-8 parsing support
already, and the code even does that already) and Windows-1252
(where most code points has the same value in unicode). Keep the
existing default as only allowing ASCII input.
Using the option type JoinedOrSeparate, since the real rc.exe
handles options in this form, even if llvm-rc uses Separate for
other similar existing options.
Rename the struct SearchParams to WriterParams since it's now used
for more than just include paths.
Add a missing getResourceTypeName method to the BundleResource class,
to fix error printing from within STRINGTABLE resources (used in
tests).
Differential Revision: https://reviews.llvm.org/D46238
llvm-svn: 331391
Summary:
This brings the filenames in accordance to the style guide and LLVM
conventions for C++ filenames.
As suggested by rnk@ in D46068.
Reviewers: rnk
Subscribers: mgorny, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D46301
llvm-svn: 331321
The logic remains the same. Eventually, I see the RCU acting as its own separate stage in the instruction pipeline.
Differential Revision: https://reviews.llvm.org/D46331
llvm-svn: 331316
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
This fixes PR37293.
We can have scheduling classes with no write latency entries, that still consume
processor resources. We don't want to treat those instructions as zero-latency
instructions; they still have to be issued to the underlying pipelines, so they
still consume resource cycles.
This is likely to be a regression which I have accidentally introduced at
revision 330807. Now, if an instruction has a non-empty set of write processor
resources, we conservatively treat it as a normal (i.e. non zero-latency)
instruction.
llvm-svn: 331193
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
Summary: Add bindings to create import declarations for modules, functions, types, and other entities. This wraps the conveniences available in the existing DIBuilder API, but these seem C++-specific.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46167
llvm-svn: 331123
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
Summary: The instruction index was never referenced in the body. Just a minor cleanup.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: javed.absar, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46142
llvm-svn: 331001
This diff implements --redefine-sym option
for changing the name of a symbol.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46029
llvm-svn: 330973
With this patch, options to add/tweak views are all grouped together in the
-help output.
The new "View Options" category looks like this:
```
View Options:
-dispatch-stats - Print dispatch statistics
-instruction-info - Print the instruction info view
-instruction-tables - Print instruction tables
-register-file-stats - Print register file statistics
-resource-pressure - Print the resource pressure view
-retire-stats - Print retire control unit statistics
-scheduler-stats - Print scheduler statistics
-timeline - Print the timeline view
-timeline-max-cycles=<uint> - Maximum number of cycles in the timeline view. Defaults to 80 cycles
-timeline-max-iterations=<uint> - Maximum number of iterations to print in timeline view
```
llvm-svn: 330816
Method BugDriver::performFinalCleanups(...) would delete Module object
it worked on, which was also deleted by its caller
(e.g. TestCodeGenerator(...)). Changed the code to avoid double delete
and make Module ownership slightly clearer.
Patch by Andrzej Janik.
llvm-svn: 330763
The instruction printer used by llvm-mca to generate the performance report now
defaults the output assembly format to the format used for the input assembly
file.
On x86, the asm format can be either AT&T or Intel, depending on the
presence/absence of directive `.intel_syntax`.
Users can still specify a different assembly dialect with the command line flag
-output-asm-variant=<uint>.
llvm-svn: 330733
It used to symlink dsymutil to llvm-dsymutil, but after r327790 llvm's dsymutil
binary is now called dsymutil without prefix.
r327792 then reversed the direction of the symlink if
LLVM_INSTALL_CCTOOLS_SYMLINKS was set, but that looks like a buildfix and not
like something anyone should need.
https://reviews.llvm.org/D45966
llvm-svn: 330727
Zero latency instructions are now scheduled the same way as other instructions.
Before this patch, there was a specialzed code path for those instructions.
All scheduler events are now generated from method `scheduleInstruction()` and
from method `cycleEvent()`. This will make easier to implement a "execution
stage", and let that stage publish all the scheduler events.
No functional change intended.
llvm-svn: 330723
/usr/local/bin/ld.lld: error: undefined symbol: llvm::createAggressiveInstCombinerPass()
>>> referenced by cc1_main.cpp
>>> tools/clang/tools/driver/CMakeFiles/clang.dir/cc1_main.cpp.o:(_GLOBAL__sub_I_cc1_main.cpp)
And so on
The bot coverage is clearly missing.
llvm-svn: 330693
Add explicit dependency on ObjcopyTableGen
and rerun the tests on Windows.
I will double-check the build bots
and revert this commit if necessary.
llvm-svn: 330685
Summary: Wrap LLVMDIBuilderCreateAutoVariable, LLVMDIBuilderCreateParameterVariable, LLVMDIBuilderCreateExpression, and move and correct LLVMDIBuilderInsertDeclareBefore and LLVMDIBuilderInsertDeclareAtEnd from the Go bindings to the C bindings.
Reviewers: harlanhaskins, whitequark, deadalnix
Reviewed By: harlanhaskins, whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45928
llvm-svn: 330555
Summary:
`llvm-bcanalyzer` prints out the stream type of the file it is
analyzing. If the file begins with the LLVM IR magic number, it reports
a stream type of "LLVM IR". However, any other bitstream format is
reported as "unknown".
Add some checks for two other common bitstream formats: Clang AST
files, which begin with 'CPCH', and Clang serialized diagnostics, which
begin with 'DIAG'.
Test Plan: `check-llvm`
Reviewers: pcc, aprantl, mehdi_amini, davide, george.karpenkov, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: JDevlieghere, bruno, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D41979
llvm-svn: 330529
This diff fixes sh_link for various types of sections
(i.e. for SHT_ARM_EXIDX, SHT_HASH). In particular, this change enables us
to use llvm-objcopy with clang -gsplit-dwarf for the target android-arm.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D45851
llvm-svn: 330478
This patch adds a StatsFile option to LTO/Config.h and updates both
LLVMGold and llvm-lto2 to set it.
Reviewers: MatzeB, tejohnson, espindola
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D45531
llvm-svn: 330411
When disassembling with -D, skip virtual sections by printing "..." for
each symbol.
This patch also implements `MachOObjectFile::isSectionVirtual`.
Test case comes from:
```
.zerofill __DATA,__common,_data64unsigned,472,3
```
Differential Revision: https://reviews.llvm.org/D45824
llvm-svn: 330342
Summary:
Instead of manually invoking PrintStatistics, simply invoke
llvm_shutdown which will take care of destroying managed statics, and as
a side effect will destroy the StatisticInfo ManagedStatic, invoking
PrintStatistics when needed.
Reviewers: fhahn
Subscribers: inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D45820
llvm-svn: 330341
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
If a class's first data member is an instance of an empty class, then an
assertion in the PrettyClassLayoutGraphicalDumper would fail. The
storage is reserved, but it's not marked as in use.
As far as I understand, it's the assertion that's faulty, so I removed it
and updated the nearby comment.
Found by running llvm-pdbutil against its own PDB, and this assertion would
fail on HashAdjusters, which is a HashTable whose first data member is a
TraitsT, which is a PdbHashTraits<T>, which is an empty struct. (The struct
has a specialization for uint32_t, but that specialization doesn't apply
here because the T is actually ulittle32_t.)
Differential Revision: https://reviews.llvm.org/D45645
llvm-svn: 330135
Create convenience functions for printing error, warning and note to
stdout. Previously we had similar functions being used in dsymutil, but
given that this pattern is so common it makes sense to make it available
globally.
llvm-svn: 330091
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Normally, the Scheduler prioritizes older instructions over younger instructions
during the instruction issue stage. In one particular case where a dependent
instruction had a schedule read-advance associated to one of the input operands,
this rule was not correctly applied.
This patch fixes the issue and adds a test to verify that we don't regress that
particular case.
llvm-svn: 330032
Summary: This enables debug fission on implicit ThinLTO when linked with gold. It will put the .dwo files in a directory specified by user.
Reviewers: tejohnson, pcc, dblaikie
Reviewed By: pcc
Subscribers: JDevlieghere, mehdi_amini, inglorion
Differential Revision: https://reviews.llvm.org/D44792
llvm-svn: 329988
Summary:
llvm-diff incorrectly reports that there's a diff when input IR contains undef/zeroinitializer/constantvector/indirectbr.
(This happens even if two identical files are given, e.g. `llvm-diff x.ll x.ll`)
This is fix to the bug report https://bugs.llvm.org/show_bug.cgi?id=33623 .
Reviewers: dexonsmith, rjmccall
Reviewed By: rjmccall
Subscribers: chenwj, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D34856
llvm-svn: 329957
Swithces from using the command line library to using TableGen. This will allow
llvm-strip to exist and allow refinements of the command line syntax.
Differential Revision: https://reviews.llvm.org/D44236
llvm-svn: 329863
These aren't the .def style files used in LLVM that require a macro
defined before their inclusion - they're just basic non-modular includes
to stamp out command line flag variables.
llvm-svn: 329840
This patch moves part of the logic that notifies dispatch stall events from the
DispatchUnit to the Scheduler.
The main goal of this patch is to remove (yet another) dependency between the
DispatchUnit and the Scheduler. Before this patch, the DispatchUnit had to know
about `Scheduler::Event` and how to classify stalls due to the lack of scheduling
resources. This patch removes that knowledge and simplifies the logic in
DispatchUnit::checkScheduler.
This is another change done in preparation for the work to fix PR36663.
No functional change intended.
llvm-svn: 329835
This patch moves the logic that collects and analyzes dispatch events to the
DispatchStatistics view.
Added flag -dispatch-stats to print statistics related to the dispatch logic.
llvm-svn: 329708
Summary:
Subtargets can define the libpfm counter names that can be used to
measure cycles and uops issued on ProcResUnits.
This allows making llvm-exegesis available on more targets.
Fixes PR36984.
Reviewers: gchatelet, RKSimon, andreadb, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45360
llvm-svn: 329675
This patch teaches llvm-mca how to parse code comments in search for special
"markers" used to select regions of code.
Example:
# LLVM-MCA-BEGIN My Code Region
....
# LLVM-MCA-END
The MCAsmLexer now delegates to an object of class MCACommentParser (i.e. an
AsmCommentConsumer) the parsing of code comments to search for begin/end code
region markers.
A comment starting with substring "LLVM-MCA-BEGIN" marks the beginning of a new
region of code. A comment starting with substring "LLVM-MCA-END" marks the end
of the last region.
This implementation doesn't allow regions to overlap. Each region can have a
optional description; internally, each region is identified by a range of source
code locations (SMLoc).
MCInst objects are added to a region R only if the source location for the
MCInst is in the range of locations specified by R.
By default, the tool allocates an implicit "Default" code region which contains
every source location. See new tests llvm-mca-marker-*.s for a few examples.
A new Backend object is created for every region. So, the analysis is conducted
on every parsed code region. The final report is the union of the reports
generated for every code region. Note that empty regions are skipped.
Special "[#] Code Region - ..." strings are used in the report to mark the
portion which is specific to a code region only. For example, see
llvm-mca-markers-5.s.
Differential Revision: https://reviews.llvm.org/D45433
llvm-svn: 329590
Summary:
The option is helpful for large projects where it's not feasible to specify sources which
user would like to see in the report. Instead, it allows to black-list specific sources via
regular expressions (e.g. now it's possible to skip all files that have "test" in its name).
This also partially fixes https://bugs.llvm.org/show_bug.cgi?id=34277
Reviewers: vsk, morehouse, liaoyuke
Reviewed By: vsk
Subscribers: kcc, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43907
llvm-svn: 329581
With the threading refactoring, loading of object files happens before
checking whether we're dealing with a swift AST. While that's not an
issue per se, it causes a warning to be printed:
warning: /path/to/a.swiftmodule: The file was not recognized as a valid object file
note: while processing /path/to/a.swiftmodule
This suppresses the warning by checking for a Swift AST before
attempting to load is as an object file.
rdar://39240444
llvm-svn: 329553
It was reported that this change measurably regressed -plugin-opt=O3
performance.
There is an ongoing discussion on llvm-dev about the correct way to
set the CG opt level, see thread "[llvm-dev] [RFC] Adding function
attributes to represent codegen optimization level".
llvm-svn: 329458
Summary:
- Add a missing getter for module-level inline assembly
- Add a missing append function for module-level inline assembly
- Deprecate LLVMSetModuleInlineAsm and replace it with LLVMSetModuleInlineAsm2 which takes an explicit length parameter
- Deprecate LLVMConstInlineAsm and replace it with LLVMGetInlineAsm, a function that allows passing a dialect and is not mis-classified as a constant operation
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45346
llvm-svn: 329369
Summary:
Previous code hangs indefinitely when trying to iterate through a
symbol link file that points to an non-exist directory. This change
fixes the bug to make the addCollectedPath function exit ealier and
print out correct warning messages.
Patch by Yuke Liao (@liaoyuke).
Reviewers: Dor1s, vsk
Reviewed By: vsk
Subscribers: bruno, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D44960
llvm-svn: 329338
These appear in a .debug$P section, which is exactly the same in
format as a .debug$T section. So we shouldn't ignore these when
dumping types.
llvm-svn: 329326
Scheduling models can now describe processor register files and retire control
units. This updates the existing documentation and the README file.
llvm-svn: 329311
This patch adds the ability to describe properties of the hardware retire
control unit.
Tablegen class RetireControlUnit has been added for this purpose (see
TargetSchedule.td).
A RetireControlUnit specifies the size of the reorder buffer, as well as the
maximum number of opcodes that can be retired every cycle.
A zero (or negative) value for the reorder buffer size means: "the size is
unknown". If the size is unknown, then llvm-mca defaults it to the value of
field SchedMachineModel::MicroOpBufferSize. A zero or negative number of
opcodes retired per cycle means: "there is no restriction on the number of
instructions that can be retired every cycle".
Models can optionally specify an instance of RetireControlUnit. There can only
be up-to one RetireControlUnit definition per scheduling model.
Information related to the RCU (RetireControlUnit) is stored in (two new fields
of) MCExtraProcessorInfo. llvm-mca loads that information when it initializes
the DispatchUnit / RetireControlUnit (see Dispatch.h/Dispatch.cpp).
This patch fixes PR36661.
Differential Revision: https://reviews.llvm.org/D45259
llvm-svn: 329304
This is done in preparation for D45259.
With D45259, models can specify the size of the reorder buffer, and the retire
throughput directly via tablegen.
llvm-svn: 329274
Summary:
Add a new plugin API. This closes the gap between pass registration and out-of-tree passes for the new PassManager.
Unlike with the existing API, interaction with a plugin is always
initiated from the tools perspective. I.e., when a plugin is loaded, it
resolves and calls a well-known symbol `llvmGetPassPluginInfo` to obtain
details about the plugin. The fundamental motivation is to get rid of as
many global constructors as possible. The API exposed by the plugin
info is kept intentionally minimal.
Reviewers: chandlerc
Reviewed By: chandlerc
Subscribers: bollu, grosser, lksbhm, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D35258
llvm-svn: 329273
Using this, you can use llvm-pdbutil to export the contents of a
stream to a binary file, then run explain on the binary file so
that it treats the offset as an offset into the stream instead
of an offset into a file. This makes it easy to compare the
contents of the same stream from two different files.
llvm-svn: 329207
