In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
This passes existing X86 test but I'm not sure if it handles all type
legalization cases it needs to.
Alternative to D89200
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89222
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
When we know that a particular type is always going to be fixed
width we have so far been writing code like this:
getSizeInBits().getFixedSize()
Since we are doing this in quite a few places now it seems to make
sense to add a new helper function that allows us to replace
these calls with a single getFixedSizeInBits() call.
Differential Revision: https://reviews.llvm.org/D88649
After some recent upstream discussion we decided that it was best
to avoid having the / operator for both ElementCount and TypeSize,
since this could give the impression that these classes can be used
in the same way as basic integer integer types. However, division
for scalable types is a bit odd because we are only dividing the
minimum quantity by a value, as opposed to something like:
(MinSize * Vscale) / SomeValue
This is why when performing division it's important the caller
first establishes whether the operation makes sense, perhaps by
calling isKnownMultipleOf() prior to division. The caller must now
explictly call divideCoefficientBy() on the class to perform the
operation.
Differential Revision: https://reviews.llvm.org/D87700
An existing function Type::getScalarSizeInBits returns a uint64_t
instead of a TypeSize class because the caller is requesting a
scalar size, which cannot be scalable. This patch makes other
similar functions requesting a scalar size consistent with that,
thereby eliminating more than 1000 implicit TypeSize -> uint64_t
casts.
Differential revision: https://reviews.llvm.org/D87889
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
(Disabled under flag for the moment)
This is part of a larger project wherein we are finally integrating lowering of gc live operands with the register allocator. Today, we force spill all operands in SelectionDAG. The code to do so is distinctly non-optimal. The approach this patch is working towards is to instead lower the relocations directly into the MI form, and let the register allocator pick which ones get spilled and which stack slots they get spilled to. In terms of performance, the later part is actually more important as it avoids redundant shuffling of values between stack slots.
This particular change adds ISEL support to produce the variadic def STATEPOINT form required by the above. In particular, the first N are lowered to variadic tied def/use pairs. So new statepoint looks like this:
reloc1,reloc2,... = STATEPOINT ..., base1, derived1<tied-def0>, base2, derived2<tied-def1>, ...
N is limited by the maximal number of tied registers machine instruction can have (15 at the moment).
The current patch is restricted to handling relocations within a single basic block. Cross block relocations (e.g. invokes) are handled via the legacy mechanism. This restriction will be relaxed in future patches.
Patch By: dantrushin
Differential Revision: https://reviews.llvm.org/D81648
Added NextPowerOf2() routine to TypeSize and rewritten the code
in getVectorTypeBreakdown to avoid warnings being generated.
Differential Revision: https://reviews.llvm.org/D81578
Summary:
Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::allowsMemoryAccess` without marking it override.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81379
Scalable vectors cannot use 'BUILD_VECTOR', so it is necessary to
properly split and widen scalable vectors when passing them
to CopyToReg/CopyFromReg.
This functionality is added to TargetLoweringBase::getVectorTypeBreakdown().
This patch only adds support for 'splitting' scalable vectors that
are a multiple of some legal type, e.g.
<vscale x 6 x i64> -> 3 x <vscale x 2 x i64>
Reviewers: efriedma, c-rhodes
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80139
This patch updates TargetLoweringBase::computeRegisterProperties and
TargetLoweringBase::getTypeConversion to support scalable vectors,
and make the right calls on how to legalise them. These changes are required
to legalise both MVTs and EVTs.
Reviewers: efriedma, david-arm, ctetreau
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80640
Current implementation of emitPatchpoint() is very inefficient:
for every FrameIndex operand if creates new MachineInstr with
that operand expanded and all other copied as is.
Since PATCHPOINT/STATEPOINT instructions may have *a lot* of
FrameIndex operands, we end up creating and erasing many
machine instructions. But we can do it in single pass, with only
one new machine instruction generated.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D81181
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
Summary:
This patch handles illegal scalable types when lowering IR operations,
addressing several places where the value of isScalableVector() is
ignored.
For types such as <vscale x 8 x i32>, this means splitting the
operations. In this example, we would split it into two
operations of type <vscale x 4 x i32> for the low and high halves.
In cases such as <vscale x 2 x i32>, the elements in the vector
will be promoted. In this case they will be promoted to
i64 (with a vector of type <vscale x 2 x i64>)
Reviewers: sdesmalen, efriedma, huntergr
Reviewed By: efriedma
Subscribers: david-arm, tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78812
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
This is based on this llvm-dev thread http://lists.llvm.org/pipermail/llvm-dev/2019-December/137521.html
The current strategy for f16 is to promote type to float every except where the specific width is required like loads, stores, and bitcasts. This results in rounding occurring in odd places instead of immediately after arithmetic operations. This interacts in weird ways with the __fp16 type in clang which is a storage only type where arithmetic is always promoted to float. InstCombine can remove some fpext/fptruncs around such arithmetic and turn it into arithmetic on half. This wouldn't be so bad if SelectionDAG was able to put those fpext/fpround back in when it promotes.
It is also not obvious how to handle to make the existing strategy work with STRICT fp. We need to use STRICT versions of the conversions which require chain operands. But if the conversions are created for a bitcast, there is no place to get an appropriate chain from.
This patch implements a different strategy where conversions are emitted directly around arithmetic operations. And otherwise its passed around as an i16 including in arguments and return values. This can result in more conversions between arithmetic operations, but is closer to matching the IR the frontend generates for __fp16. And it will allow us to use the chain from constrained arithmetic nodes to link the STRICT_FP_TO_FP16/STRICT_FP16_TO_FP that will need to be added. I've set it up so that each target can opt into the new behavior. Converting all the targets myself was more than I was able to handle.
Differential Revision: https://reviews.llvm.org/D73749
and macro FUNCTION likewise. NFCI.
Some functions like fmuladd don't really have a node, we should divide
the declaration form those have node to avoid introducing fake nodes.
Differential Revision: https://reviews.llvm.org/D72871
This was dropping the invariant metadata on dead argument loads, so
they weren't deleted.
Atomics still need to be fixed the same way. Also, apparently store
was never preserving dereferencable which should also be fixed.
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
For now, we didn't set the default operation action for SIGN_EXTEND_INREG for
vector type, which is 0 by default, that is legal. However, most target didn't
have native instructions to support this opcode. It should be set as expand by
default, as what we did for ANY_EXTEND_VECTOR_INREG.
Differential Revision: https://reviews.llvm.org/D70000
MVE has a basic symmetry between it's normal loads/store operations and
the masked variants. This means that masked loads and stores can use
pre-inc and post-inc addressing modes, just like the standard loads and
stores already do.
To enable that, this patch adds all the relevant infrastructure for
treating masked loads/stores addressing modes in the same way as normal
loads/stores.
This involves:
- Adding an AddressingMode to MaskedLoadStoreSDNode, along with an extra
Offset operand that is added after the PtrBase.
- Extending the IndexedModeActions from 8bits to 16bits to store the
legality of masked operations as well as normal ones. This array is
fairly small, so doubling the size still won't make it very large.
Offset masked loads can then be controlled with
setIndexedMaskedLoadAction, similar to standard loads.
- The same methods that combine to indexed loads, such as
CombineToPostIndexedLoadStore, are adjusted to handle masked loads in
the same way.
- The ARM backend is then adjusted to make use of these indexed masked
loads/stores.
- The X86 backend is adjusted to hopefully be no functional changes.
Differential Revision: https://reviews.llvm.org/D70176
float node
This patch add an option 'disable-strictnode-mutation' to prevent strict
node mutating to an normal node.
So we can make sure that the patch which sets strict-node as legal works
correctly.
Patch by Chen Liu(LiuChen3)
Differential Revision: https://reviews.llvm.org/D70226
Summary
In several places we need to enumerate all constrained intrinsics or IR
nodes that should be represented by them. It is easy to miss some of
the cases. To make working with these intrinsics more convenient and
robust, this change introduces file containing definitions of all
constrained intrinsics and some of their properties. This file can be
included to generate constrained intrinsics processing code.
Reviewers: kpn, andrew.w.kaylor, cameron.mcinally, uweigand
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69887
