Summary:
Currently, ARMGenSubtargetInfo (from ARM.td) is reaching the limit of 96:
enum : uint64_t {
...
XScale = 95
};
We need to bump the maximum value up to accommodate future changes and/or customized subtarget definitions.
Reviewers: apazos, t.p.northover
Subscribers: llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D15514
llvm-svn: 255616
The post-dominance property is not sufficient to guarantee that a restore point
inside a loop is safe.
E.g.,
while(1) {
Save
Restore
if (...)
break;
use/def CSRs
}
All the uses/defs of CSRs are dominated by Save and post-dominated
by Restore. However, the CSRs uses are still reachable after
Restore and before Save are executed.
This fixes PR25824
llvm-svn: 255613
This case was tested in the linker from code, but not from globals indexing into other globals. The linker currently barfs on this, ncbray volunteered to fix it.
llvm-svn: 255601
For non padded structs, we can just proceed and deaggregate them.
We don't want ot do this when there is padding in the struct as to not
lose information about this padding (the subsequents passes would then
try hard to preserve the padding, which is undesirable).
Also update extractvalue.ll and cast.ll so that they use structs with padding.
Remove the FIXME in the extractvalue of laod case as the non padded case is
handled when processing the load, and we don't want to do it on the padded
case.
Patch by: Amaury SECHET <deadalnix@gmail.com>
Differential Revision: http://reviews.llvm.org/D14483
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255600
The symbol being printed in this field comes from the main symbol table,
not 0xF1 subsection. Use LinkageName to make that a lot clearer.
llvm-svn: 255596
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Recommit of r255589, trying to please g++ as well.
Differential Revision: http://reviews.llvm.org/D15464
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 255593
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255589
Prior to this patch, we would wrongly stick to the variant with imm8 encoding
even when the relocation could not fit that size.
rdar://problem/23785506
llvm-svn: 255583
Profile symbols have long prefixes which waste space and creating pressure for linker.
This patch shortens the prefixes to minimal length without losing verbosity.
Differential Revision: http://reviews.llvm.org/D15503
llvm-svn: 255575
This moves the actual work to do loop rotation into standalone
functions with the analysis results they need passed in as arguments,
leaving the class itself as a relatively simple shim. This will make
the functions easy to reuse when we're ready to port this
transformation to the new pass manager.
llvm-svn: 255574
This just moves some callers after their callees. My next patch will
convert some of these methods to stand alone functions, and that diff
is more obviously NFC if I move these first. That change, in turn,
will make it much easier to port this pass to the new pass manager
once the loop pass manager is in place.
llvm-svn: 255573
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
Prior to this patch, we would wrongly stick to the variant with imm8 encoding
even when the relocation could not fit that size.
rdar://problem/23785506
llvm-svn: 255570
Add return type information to call and call_indirect instructions. This
allows them to be disambiguated without knowledge of the callee.
Differential Revision: http://reviews.llvm.org/D15484
llvm-svn: 255565
Implement a new BLOCK scope placement algorithm which better handles
early-return blocks and early exists from nested scopes.
Differential Revision: http://reviews.llvm.org/D15368
llvm-svn: 255564
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
This patch adds optional fast-math-flags (the same that apply to fmul/fadd/fsub/fdiv/frem/fcmp)
to call instructions in IR. Follow-up patches would use these flags in LibCallSimplifier, add
support to clang, and extend FMF to the DAG for calls.
Motivating example:
%y = fmul fast float %x, %x
%z = tail call float @sqrtf(float %y)
We'd like to be able to optimize sqrt(x*x) into fabs(x). We do this today using a function-wide
attribute for unsafe-math, but we really want to trigger on the instructions themselves:
%z = tail call fast float @sqrtf(float %y)
because in an LTO build it's possible that calls with fast semantics have been inlined into a
function with non-fast semantics.
The code changes and tests are based on the recent commits that added "notail":
http://reviews.llvm.org/rL252368
and added FMF to fcmp:
http://reviews.llvm.org/rL241901
Differential Revision: http://reviews.llvm.org/D14707
llvm-svn: 255555
The WebAssemblyStoreResults pass runs before LiveVariables, so it doesn't
expect to have to keep dead flags up to date; check this with an assert.
llvm-svn: 255551
This code adds some simple decoding of the FDE's in an eh_frame.
There's still more to be done in terms of error handling and verification.
Also, we need to be able to decode the CFI's.
llvm-svn: 255550
This is the start of work to dump the contents of the eh_frame section.
It currently emits CIE entries. FDE entries will come later.
It also needs improved error checking which will follow soon.
http://reviews.llvm.org/D15502
Reviewed by Kevin Enderby and Lang Hames.
llvm-svn: 255546
This will make the depedence graph more accurate if an alias analysis
is provided. If nullptr is specified in its place, the behavior will
remain as it is currently.
llvm-svn: 255540
This will allow custom handling of packet finalization. The current
definition of endPacket will still perform the default finalization.
llvm-svn: 255537
Make sure to check that the destination type is sized.
A check was present but was incorrectly checking the source type
instead.
Patch by Amaury SECHET!
Differential Revision: http://reviews.llvm.org/D15264
llvm-svn: 255536
The normalization may cause assertion failures on SystemZ and some out-of-tree
tests. The root cause is that unknown probabilities are materialized into known
ones by calling getSuccProbability(), which is then used to add another
successor to the same MBB which results in mixed known and unknown
probabilities. But currently those mixed probabilities cannot be normalized.
I will compose another patch to fix the root issue.
llvm-svn: 255530
