This implements a new table-gen emitter to create tables for
a wasm disassembler, and a dissassembler to use them.
Comes with 2 tests, that tests a few instructions manually. Is also able to
disassemble large .wasm files with objdump reasonably.
Not working so well, to be addressed in followups:
- objdump appears to be passing an incorrect starting point.
- since the disassembler works an instruction at a time, and it is
disassembling stack instruction, it has no idea of pseudo register assignments.
These registers are required for the instruction printing code that follows.
For now, all such registers appear in the output as $0.
Patch by Wouter van Oortmerssen
Differential Revision: https://reviews.llvm.org/D45848
llvm-svn: 332052
Clang's codegen now uses 128-bit masked load/store intrinsics in IR. The backend will widen to 512-bits on AVX512F targets.
So this patch adds patterns to detect codegen's widening and patterns for AVX512VL that don't get widened.
We may be able to drop some of the old patterns, but I leave that for a future patch.
llvm-svn: 332049
This reverts commit SVN r331889, which could trigger failed
assertions for cases where the snprintf function is declared
with a vaguely differing signature (e.g. being defined as
static inline), see PR37408.
llvm-svn: 332043
Summary: Move and correct LLVMDIBuilderCreateTypedef. This is the last API in DIBuilderBindings.h, so it is being removed and the C API will now be re-exported from IRBindings.h.
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46725
llvm-svn: 332041
length excluding the table header. Instead it must encode the contribution length minus the length
field itself.
Reviewer: JDevliegehere
Differential Revision: https://reviews.llvm.org/D45922
llvm-svn: 332030
In general, it's difficult to poke the ConstantExpr code in CFLAA, since
LLVM is so great at eagerly reducing ConstantExprs. :)
Sadly, this only shows a functional difference from before the patch
because CFLAA has some special logic around taking loads of non-pointers
into account. Namely, with the broken select behavior, CFLAA will
completely fail to take note of @g3. Since CFLAA doesn't have any record
about @g3 when we do an alias query for @g3 and %a, it conservatively
answers MayAlias. When we properly take @g3 into account with the new
select logic, we get NoAlias for this query.
I suspect that the aforementioned "special logic" isn't completely
correct, but this test-case should prevent future wonky aliasing results
from appearing for these flavors of ConstantExprs, so I think it's still
worth having.
llvm-svn: 332017
Accessing the members of a large data structures needs a lot of GEPs which
usually have large offsets due to the size of the underlying data structure. If
the offsets are too large to fit into the r+i addressing mode, these GEPs cannot
be sunk to their users' blocks and many extra registers are needed then to carry
the values of these GEPs.
This patch tries to split a large data struct starting from %base like the
following.
Before:
BB0:
%base =
BB1:
%gep0 = gep %base, off0
%gep1 = gep %base, off1
%gep2 = gep %base, off2
BB2:
%load1 = load %gep0
%load2 = load %gep1
%load3 = load %gep2
After:
BB0:
%base =
%new_base = gep %base, off0
BB1:
%new_gep0 = %new_base
%new_gep1 = gep %new_base, off1 - off0
%new_gep2 = gep %new_base, off2 - off0
BB2:
%load1 = load i32, i32* %new_gep0
%load2 = load i32, i32* %new_gep1
%load3 = load i32, i32* %new_gep2
In the above example, the struct is split into two parts. The first part still
starts from %base and the second part starts from %new_base. After the
splitting, %new_gep1 and %new_gep2 have smaller offsets and then can be sunk to
BB2 and folded into their users.
The algorithm to split data structure is simple and very similar to the work of
merging SExts. First, it collects GEPs that have large offsets when iterating
the blocks. Second, it splits the underlying data structures and updates the
collected GEPs to use smaller offsets.
Differential Revision: https://reviews.llvm.org/D42759
llvm-svn: 332015
Summary:
- Adds getters for the line, column, and scope of a DILocation
- Adds getters for the name, size in bits, offset in bits, alignment in bits, line, and flags of a DIType
Reviewers: whitequark, harlanhaskins, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46627
llvm-svn: 332014
Summary: The final -wasm component has been the default for some time now.
Subscribers: jfb, dschuff, jgravelle-google, eraman, aheejin, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D46342
llvm-svn: 332007
These symbols only get included in the output symbols table if
they are used in a relocation.
This behaviour matches more closely the ELF object writer.
Differential Revision: https://reviews.llvm.org/D46561
llvm-svn: 332005
This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
This diff slightly reorganizes the tests and improves
the test coverage of help messages / error reports.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46589
llvm-svn: 331993
With nnan, there's no need for the masked merge / blend
sequence (that probably costs much more than the min/max
instruction).
Somewhere between clang 5.0 and 6.0, we started producing
these intrinsics for fmax()/fmin() in C source instead of
libcalls or fcmp/select. The backend wasn't prepared for
that, so we regressed perf in those cases.
Note: it's possible that other targets have similar problems
as seen here.
Noticed while investigating PR37403 and related bugs:
https://bugs.llvm.org/show_bug.cgi?id=37403
The IR FMF propagation cases still don't work. There's
a proposal that might fix those cases in D46563.
llvm-svn: 331992
Summary:
This change teaches DSE that the atomic memory intrinsics can be overwriten
partially in the same way as the non-atomic forms. Specifically, that the
atomic memcpy & memset can be shortened at the end and that the atomic memset
can be shortened at the beginning, if they partially overwritten
by later stores.
Reviewers: mkazantsev, skatkov, apilipenko, efriedma, rsmith, spatel, filcab, sanjoy
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45584
llvm-svn: 331991
Fixes bug https://bugs.llvm.org/show_bug.cgi?id=37339.
InlineAsm is only uniqued if the FunctionTypes are exactly the
same, while cmpTypes() for example considers all pointer types
in the default address space to be the same. For this reason
the end of cmpInlineAsm() can be reached.
This patch replaces the unreachable assertion with a check that
the function types are not identical.
Differential Revision: https://reviews.llvm.org/D46495
Reviewers: jfb
llvm-svn: 331990
Clang 6.0 was updated to create these intrinsics rather than
libcalls or fcmp/select, but the backend wasn't prepared to
handle that optimally.
This bug is not the primary reason for PR37403:
https://bugs.llvm.org/show_bug.cgi?id=37403
...but it's probably more important for x86 perf.
llvm-svn: 331988
Summary:
The combine in rebuildSetCC may be combined to another
node leaving our references stale. Keep a handle on
it to avoid stale references.
Fixes PR36602.
Reviewers: dbabokin, RKSimon, eli.friedman, davide
Subscribers: hiraditya, uabelho, JesperAntonsson, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D46404
llvm-svn: 331985
The print format was causing at least 2 unit-test failures from r331971.
The signed/unsigned comparison warnings only appeared to affect two lines but
it was unclear whether it might just pop up on other lines, so I have been
explicit in all the literals in the tests.
There were other bot unit-test failures that I am still investigating.
llvm-svn: 331978
Summary:
Operand 0 is the condition, not the true value.
Use op 1 and op 2 as the correct values.
Reviewers: george.burgess.iv, nlopes, efriedma
Reviewed By: george.burgess.iv
Subscribers: craig.topper, rjmccall, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D46343
llvm-svn: 331976
Put in a conservatively correct estimate for now. Avoids miscompiling
clang in FDO mode. This is really tricky to trigger in reality as
basically all interesting cases will be folded away by computeKnownBits
earlier, I was unable to find a reasonably small test case.
llvm-svn: 331975
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
During simplification umax we trigger isKnownPredicate twice. As a first attempt it
tries the induction. To do that it tries to get post increment of SCEV.
Re-writing the SCEV may result in simplification of umax. If the SCEV contains a lot
of umax operations this recursion becomes very slow.
The added test demonstrates the slow behavior.
To resolve this we use only simple ways to check whether the predicate is known.
Reviewers: sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: lebedev.ri, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46046
llvm-svn: 331949
