There's only one use of this currently, but that could
change with D46563. Either way, we shouldn't have to
update code outside of the flags struct when those
flag definitions change.
llvm-svn: 332155
Summary: getIncomingValueForBlock is just a wrapper API that should return a MemoryAccess, instead of a generic Value.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D46779
llvm-svn: 332153
This is a CodeExtractor improvement which adds support for extracting blocks
which have exception handling constructs if that is legal to do. CodeExtractor
performs validation checks to ensure that extraction is legal when it finds
invoke instructions or EH pads (landingpad, catchswitch, or cleanuppad) in
blocks to be extracted.
I have also added an option to allow extraction of blocks with alloca
instructions, but no validation is done for allocas. CodeExtractor caller has
to validate it himself before allowing alloca instructions to be extracted.
By default allocas are still not allowed in extraction blocks.
Differential Revision: https://reviews.llvm.org/D45904
llvm-svn: 332151
Summary:
We have no logic to promote alloca to vector for an AddrSpaceCast instruction.
Reviewer:
arsenm
Differential Revision:
https://reviews.llvm.org/D45993
llvm-svn: 332147
Let separate-const-offset-from-gep pass handle trunc() when it calculates
constant offset relative to base. The pass itself may insert trunc()
instructions when it canonicalises array indices to pointer-size integers
and needs to handle trunc() in order to evaluate the offset.
Differential Revision: https://reviews.llvm.org/D46732
llvm-svn: 332142
Remove a useless SwitchSection which also causes compilation failure
when IR contains comdat.
The SwitchSection is useless because the current section is already
correct text section for the function therefore no need to switch.
It causes compilation failure for comdat because functions with comdat
has specific text section, not the default .text section.
Since HIP uses comdat, this bug caused failures for HIP.
Differential Revision: https://reviews.llvm.org/D46770
llvm-svn: 332137
Summary:
This change adds handling of the atomic memset intrinsic to the
code path that simplifies the regular memset. In practice this means
that we will now also expand a small constant-length atomic memset
into a single unordered atomic store.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46660
llvm-svn: 332132
ExtendSetCCUses updates SETCC nodes which use a load (OriginalLoad) to
reflect a simplification to the load (ExtLoad).
Based on my reading, ExtendSetCCUses may create new nodes to extend a
constant attached to a SETCC. It also creates fresh SETCC nodes which
refer to any updated operands.
ISTM that the location applied to the new constant and SETCC nodes
should be the same as the location of the ExtLoad.
This was suggested by Adrian in https://reviews.llvm.org/D45995.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46216
llvm-svn: 332119
This teaches tryToFoldExtOfLoad to set the right location on a
newly-created extload. With that in place, the logic for performing a
certain ([s|z]ext (load ...)) combine becomes identical for sexts and
zexts, and we can get rid of one copy of the logic.
The test case churn is due to dependencies on IROrders inherited from
the wrong SDLoc.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46158
llvm-svn: 332118
Part of the logic for combining (zext (load ...)) and (sext (load ...))
is duplicated. This creates problems because bugs in one version have to
be fixed again in the other version.
To address this, as a first step, I've extracted the duplicate logic
into a helper. I'll fix the debug location bug in the helper and
eliminate the copy of its logic in a followup.
Part of: llvm.org/PR37262
Differential Revision: https://reviews.llvm.org/D46157
llvm-svn: 332117
These directives allow the 'C' (compressed) extension to be enabled/disabled
within a single file.
Differential Revision: https://reviews.llvm.org/D45864
Patch by Kito Cheng
llvm-svn: 332107
If the sprintf function is static (as on mingw-w64, where many stdio
functions are static inline wrappers), earlier optimization passes
could optimize out the return value altogether, and make it void,
which could break optimizations of this libcall that touch the
return value.
This fixes the issue discussed in PR37408 for the sprintf function.
Differential Revision: https://reviews.llvm.org/D46752
llvm-svn: 332106
Summary:
performPostLD1Combine in AArch64ISelLowering looks for vector
insert_vector_elt of a loaded value which it can optimize into a single
LD1LANE instruction. The code checking for the pattern was not checking
if the lane index was a constant which could cause two problems:
- an assert when lowering the LD1LANE ISD node since it assumes an
constant operand
- an assert in isel if the lane index value depends on the
post-incremented base register
Both of these issues are avoided by simply checking that the lane index
is a constant.
Fixes bug 35822.
Reviewers: t.p.northover, javed.absar
Subscribers: rengolin, kristof.beyls, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D46591
llvm-svn: 332103
Phi nodes can reside in live blocks but one of their incoming
arguments can come from a dead block. Dead blocks and reassociate
don't play nice together. In fact, reassociate performs an RPO
as a first step to avoid processing dead blocks.
The reason why Reassociate might not fixpoint when examining
dead blocks is that the following:
%xor0 = xor i16 %xor1, undef
%xor1 = xor i16 %xor0, undef
is perfectly valid LLVM IR (if it appears in a dead block),
so the worklist algorithm keeps pushing the two instructions for
reexamination. Note that this is not Reassociate fault, at least
not entirely. It's llvm that has a weird definition of dominance.
Fixes PR37390.
llvm-svn: 332100
Confirmed by both Agner and Intel's AOM - the IEC/FPC are not required for pure load/stores (even if its a partial update).
Can't fix WriteStore until all RMW instructions are cleaned up though....
llvm-svn: 332096
Summary:
This change reworks the handling of atomic memcpy within the instcombine pass.
Previously, a constant length atomic memcpy would be lowered into loads & stores
as long as no more than 16 load/store pairs are created. This is quite different
from the lowering done for a non-atomic memcpy; which only ever lowers into a single
load/store pair of no more than 8 bytes. Larger constant-sized memcpy calls are
expanded to load/stores in later passes, such as SelectionDAG lowering.
In this change the behaviour for atomic memcpy is unified with non-atomic memcpy;
atomic memcpy is now treated in the same was as non-atomic memcpy has always been.
We leave it to later passes to lower longer-length atomic memcpy calls.
Due to the structure of the pass's handling of memtransfer intrinsics, this change
also gives us handling of atomic memmove that we did not previously have.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46658
llvm-svn: 332093
losesInfo would be left unset when no conversion needs to be done. A
caller such as InstCombine's fitsInFPType would then branch on an
uninitialized value.
Caught using valgrind on an out-of-tree target.
Differential Revision: https://reviews.llvm.org/D46645
llvm-svn: 332087
Summary: Fix two typos which result in verifying wrong data structures (DT) instead of PDT in DominatorTreeBatchUpdatesTest.
Reviewers: davide, kuhar, grosser, dberlin
Reviewed By: davide, kuhar, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46696
llvm-svn: 332086
This diff adds support for -remove-section to llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D46567
llvm-svn: 332081
Verify that the input binary is not getting modified
and add an invocation which uses -remove-section instead of -R.
Test plan: make check-all
llvm-svn: 332078
Summary:
https://bugs.llvm.org/show_bug.cgi?id=34897 demonstrates an incorrect
coroutine frame allocation elision in the coro-elide pass. The elision
is performed on the basis that the SSA variables from all llvm.coro.begin
are directly referenced in subsequent llvm.coro.destroy instructions.
However, this ignores the fact that the function may exit through paths
that do not run these destroy instructions. In the sample program from
PR34897, for example, the llvm.coro.destroy instruction is only
executed in exception handling code. When the coroutine function exits
normally, llvm.coro.destroy is not called. Eliding the allocation in
this case causes a subsequent reference to the coroutine handle from
outside of the function to access freed memory.
To fix the issue, when finding an llvm.coro.destroy for each llvm.coro.begin,
only consider llvm.coro.destroy that are executed along non-exceptional paths.
Test Plan:
1. Download the sample program from
https://bugs.llvm.org/show_bug.cgi?id=34897, compile it with
`clang++ -fcoroutines-ts -stdlib=libc++ -std=c++1z -O2`, and run it.
It should print `"run1\ncheck1\nrun2\ncheck2"` and then exit
successfully.
2. Compile https://godbolt.org/g/mCKfnr and confirm it is still
optimized to a single instruction, 'return 1190'.
3. `check-llvm`
Reviewers: rsmith, GorNishanov, eric_niebler
Reviewed By: GorNishanov
Subscribers: andrewrk, lewissbaker, EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D43242
llvm-svn: 332077
Summary:
Add documentation for the LLVM Support functions `openFileForWrite` and
`openFileForRead`. The `openFileForRead` parameter `RealPath`, in
particular, I think warranted some explanation.
In addition, make the behavior of the functions more consistent across
platforms. Prior to this patch, Windows would set or not set the result
file descriptor based on the nature of the error, whereas Unix would
consistently set it to `-1` if the open failed. Make Windows
consistently set it to `-1` as well.
Test Plan:
1. `ninja check-llvm`
2. `ninja docs-llvm-html`
Reviewers: zturner, rnk, danielmartin, scanon
Reviewed By: danielmartin, scanon
Subscribers: scanon, danielmartin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46499
llvm-svn: 332075
Summary:
Ship kNetBSD_ShadowOffset32 set to 1ULL << 30.
This is prepared for the amd64 kernel runtime.
Sponsored by <The NetBSD Foundation>
Reviewers: vitalybuka, joerg, kcc
Reviewed By: vitalybuka
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46724
llvm-svn: 332069
These rotates take the form
(x << (n & mask)) | (x >> (-n & mask)) where mask is bitwidth - 1.
If x has been promoted to a wider type than its original bit width due to type promotion we fail to narrower it and therefore don't recognize it as a rotate.
llvm-svn: 332068
We were reporting "Unsupported" tests in xunit as passes, however since
they are not run, it make more sense to mark them as skipped. The Junit
xml standard has support for that, so lets use it.
llvm-svn: 332065
String concatenation in python is slow. Refactor to not concatenate the
possibly large strings of test output and instead write them directly
to the output file.
llvm-svn: 332064
We found current sampleFDO had a performance issue when triaging a regression.
For a callsite with inline instance in the profile, even if hot callsite inliner
cannot inline it, it may still execute enough times and should not be treated as
cold in regular inliner later. However, currently if such callsite is not inlined
by hot callsite inliner, and the BB where the callsite locates doesn't get
samples from other instructions inside of it, the callsite will have no profile
metadata annotated. In regular inliner cost analysis, if the callsite has no
profile annotated and its caller has profile information, it will be treated as
cold.
The fix changes the isCallsiteHot check and chooses to compare
CallsiteTotalSamples with hot cutoff value computed by ProfileSummaryInfo.
Differential Revision: https://reviews.llvm.org/D45377
llvm-svn: 332058
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
