LLVM CMake build already uses libtool instead of ar when building
for Apple platform and we should be using the same when building
runtimes. To do so, this change extracts the logic for finding
libtool into a separate file and then uses it from both the LLVM
build as well as the LLVM runtimes build.
Differential Revision: https://reviews.llvm.org/D62769
llvm-svn: 362313
Over a year ago, MachineInstr gained a fourth boolean parameter that occurs
before the TII pointer. When this happened, several places started accidentally
passing TII into this boolean parameter instead of the TII parameter.
llvm-svn: 362312
The AVX512BW and AVX512VL checks were never used. And AVX512 is the same
as AVX on all tests that weren't already split for AVX1 and AVX2.
llvm-svn: 362308
Extract a willNotOverflow() helper function that is shared between
eliminateOverflowIntrinsic() and strengthenOverflowingOperation().
Use WithOverflowInst for the former.
We'll be able to reuse the same code for saturating intrinsics as
well.
llvm-svn: 362305
Summary: Fneg can be implemented with an xor rather than a function call so we don't need to add the function call overhead. This was pointed out in D62699
Reviewers: efriedma, cameron.mcinally
Reviewed By: efriedma
Subscribers: javed.absar, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62747
llvm-svn: 362304
The `cfcmsa` and `ctcmsa` instructions accept index of MSA control
register. The MIPS64 SIMD Architecture define eight MSA control
registers. But register index for `cfcmsa` and `ctcmsa` instructions
might be any number in 0..31 range. If the index is greater then 7,
`cfcmsa` writes zero to the destination registers and `ctcmsa` does
nothing [1].
[1] MIPS Architecture for Programmers Volume IV-j:
The MIPS64 SIMD Architecture Module
https://www.mips.com/?do-download=the-mips64-simd-architecture-module
Differential Revision: https://reviews.llvm.org/D62597
llvm-svn: 362299
If we would allow register coalescing on PTRDISPREGS class then register
allocator can lock Z register to some virtual register. Larger instructions
requiring a memory acces then fail during the register allocation phase since
there is no available register to hold a pointer if Y register was already
taken for a stack frame. This patch prevents it by keeping Z register
spillable. It does it by not allowing coalescer to lock it.
Original discussion on https://github.com/avr-rust/rust/issues/128.
llvm-svn: 362298
I have initially added it in for test to display both
whether the binop w/ constant is sinked or hoisted.
But as it can be seen from the 'sub (sub C, %x), %y'
test, that actually conceals the issues it is supposed to test.
At least two more patterns are unhandled:
* 'add (sub C, %x), %y' - D62266
* 'sub (sub C, %x), %y'
llvm-svn: 362295
Fix for https://bugs.llvm.org/show_bug.cgi?id=31181 and partial fix
for LFTR poison handling issues in general.
When LFTR moves a condition from pre-inc to post-inc, it may now
depend on value that is poison due to nowrap flags. To avoid this,
we clear any nowrap flag that SCEV cannot prove for the post-inc
addrec.
Additionally, LFTR may switch to a different IV that is dynamically
dead and as such may be arbitrarily poison. This patch will correct
nowrap flags in some but not all cases where this happens. This is
related to the adoption of IR nowrap flags for the pre-inc addrec.
(See some of the switch_to_different_iv tests, where flags are not
dropped or insufficiently dropped.)
Finally, there are likely similar issues with the handling of GEP
inbounds, but we don't have a test case for this yet.
Differential Revision: https://reviews.llvm.org/D60935
llvm-svn: 362292
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
33".
It seems that this statement is doing the standard bitwise trick for
adjusting a value to have a specific alignment.
The issue is that getStubAlignment() returns an unsigned, while DataSize
is declared a uint64_t. The right hand side of the expression is not
extended to 64b before bitwise negation, resulting in the top half of
the mask being 0s, which is not correct for realignment.
Reviewers: lhames, MaskRay
Reviewed By: MaskRay
Subscribers: RKSimon, MaskRay, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62227
llvm-svn: 362286
ARM64 CodeView test was incorrectly put under test/DebugInfo/COFF folder which
runs for all all architectures. This fix moves it to a subfolder AArch64 with
lit.local.cfg which specify it supports AArch64 only.
llvm-svn: 362283
At the moment, LoopPredication completely bails out if it sees a latch of the form:
%cmp = icmp ne %iv, %N
br i1 %cmp, label %loop, label %exit
OR
%cmp = icmp ne %iv.next, %NPlus1
br i1 %cmp, label %loop, label %exit
This is unfortunate since this is exactly the form that LFTR likes to produce. So, go ahead and recognize simple cases where we can.
For pre-increment loops, we leverage the fact that LFTR likes canonical counters (i.e. those starting at zero) and a (presumed) range fact on RHS to discharge the check trivially.
For post-increment forms, the key insight is in remembering that LFTR had to insert a (N+1) for the RHS. CVP can hopefully prove that add nsw/nuw (if there's appropriate range on N to start with). This leaves us both with the post-inc IV and the RHS involving an nsw/nuw add, and SCEV can discharge that with no problem.
This does still need to be extended to handle non-one steps, or other harder patterns of variable (but range restricted) starting values. That'll come later.
Differential Revision: https://reviews.llvm.org/D62748
llvm-svn: 362282
We were hashing the string pointer, not the string, so two instructions
could be identical (isIdenticalTo), but have different hash codes.
This showed up as a very rare, non-deterministic assertion failure
rehashing a DenseMap constructed by MachineOutliner. So there's no
"real" testcase, just a unittest which checks that the hash function
behaves correctly.
I'm a little scared fixing this is going to cause a regression in
outlining or MachineCSE, but hopefully we won't run into any issues.
Differential Revision: https://reviews.llvm.org/D61975
llvm-svn: 362281
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
Summary:
It looks like since INLINEASM_BR was created off of INLINEASM (r353563),
a few checks for INLINEASM needed to be updated to check for either
case.
pr/41999
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: nemanjai, hiraditya, kbarton, jsji, llvm-commits, craig.topper, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62403
llvm-svn: 362278
Testing with debuggers shows that our previous behavior was correct.
The reason I thought MSVC did things differently is that MSVC prefers to
use the 0xB combined code offset and code length update opcode when
inline sites are discontiguous.
Keep the test changes, and update the llvm-pdbutil inline line table
dumper to account for this new interpretation of the opcodes.
llvm-svn: 362277
When the object size argument is -1, no checking can be done, so calling the
_chk variant is unnecessary. We already did this for a bunch of these
functions.
rdar://50797197
Differential revision: https://reviews.llvm.org/D62358
llvm-svn: 362272
Just copy all of the operands except the chain and call MorphNode on that.
This removes the IsUnary and IsTernary flags.
Also always get the result type from the result type of the original
nodes. Previously we got it from the operand except for two nodes
where that didn't work.
llvm-svn: 362269
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
7".
These statements are order independent, short of the use-after-move.
Reviewers: echristo, srhines, RKSimon
Reviewed By: RKSimon
Subscribers: dblaikie, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62114
llvm-svn: 362267
Summary:
Fixes a warning produced from scan-build (llvm.org/reports/scan-build/),
further warnings found by annotation isMoveInstr [[nodiscard]].
isMoveInstr potentially does not assign to its parameters, so if they
were uninitialized, they will potentially stay uninitialized. It seems
most call sites pass references to uninitialized values, then use them
without checking the return value.
Reviewers: wmi
Reviewed By: wmi
Subscribers: MatzeB, qcolombet, hiraditya, tpr, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62109
llvm-svn: 362265
After improving the inline line table dumper in llvm-pdbutil and looking
at MSVC's inline line tables, it is clear that setting the length of the
inlined code region does not update the code offset. This means that the
delta to the beginning of a new discontiguous inlined code region should
be calculated relative to the last code offset, excluding the length.
Implementing this is a one line fix for MC: simply don't update
LastLabel.
While I'm updating these test cases, switch them to use llvm-objdump -d
and llvm-pdbutil. This allows us to show offsets of each instruction and
correlate the line table offsets to the actual code.
llvm-svn: 362264
If we can determine that a saturating add/sub will not overflow based
on range analysis, convert it into a simple binary operation. This is
a sibling transform to the existing with.overflow handling.
Reapplying this with an additional check that the saturating intrinsic
has integer type, as LVI currently does not support vector types.
Differential Revision: https://reviews.llvm.org/D62703
llvm-svn: 362263
Noticed on D62703. LVI only handles plain integers, not vectors of
integers. This was previously not an issue, because vector support
for with.overflow is only a relatively recent addition.
llvm-svn: 362261
This feeds the new llvm_codsign BUNDLE_PATH option through from the llvm target wrapper functions, so that you can specify the BUNDLE_PATH on the target's codesign.
llvm-svn: 362248
