When handling vectors with non byte-sized elements, reverse the order of the
elements in the built integer if the target is Big-Endian.
SystemZ tests updated.
Review: Eli Friedman, Ulrich Weigand.
https://reviews.llvm.org/D42786
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324063 91177308-0d34-0410-b5e6-96231b3b80d8
Allow SimplifyDemandedBits to use TargetLoweringOpt::computeKnownBits to look through bitcasts. This can help simplifying in some cases where bitcasts of constants generated during or after legalization can't be folded away, and thus didn't get picked up by SimplifyDemandedBits. This fixes PR34620, where a redundant pand created during legalization from lowering and lshr <16xi8> wasn't being simplified due to the presence of a bitcasted build_vector as an operand.
Committed on the behalf of @sameconrad (Sam Conrad)
Differential Revision: https://reviews.llvm.org/D41643
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321969 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to improve X86's ability to match this into an address computation. Otherwise the other operand gets assigned to the base register and the stack pointer + frame index ends up in the index register. But index registers can't encode ESP/RSP so we end up having to move it into another register to meet the constraint.
I could try to improve the address matcher in X86, but swapping the producer seemed easier. Several other places already have the operands in this order so this is at least consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321370 91177308-0d34-0410-b5e6-96231b3b80d8
Two issues found when doing codegen for splitting vector with non-zero alloca addr space:
DAGTypeLegalizer::SplitVecRes_INSERT_VECTOR_ELT/SplitVecOp_EXTRACT_VECTOR_ELT uses dummy pointer info for creating
SDStore. Since one pointer operand contains multiply and add, InferPointerInfo is unable to
infer the correct pointer info, which ends up with a dummy pointer info for the target to lower
store and results in isel failure. The fix is to introduce MachinePointerInfo::getUnknownStack to
represent MachinePointerInfo which is known in alloca address space but without other information.
TargetLowering::getVectorElementPointer uses value type of pointer in addr space 0 for
multiplication of index and then add it to the pointer. However the pointer may be in an addr
space which has different size than addr space 0. The fix is to use the pointer value type for
index multiplication.
Differential Revision: https://reviews.llvm.org/D39758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319622 91177308-0d34-0410-b5e6-96231b3b80d8
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319272 91177308-0d34-0410-b5e6-96231b3b80d8
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319173 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
Some of the AMDGPU stack addressing modes require knowing the sign
bit is zero. We used to accomplish this by custom lowering
frame indexes, and then putting an AssertZext around a
TargetFrameIndex. This required specifically looking for
the AssextZext + frame index pattern which was moderately
disgusting. The same could probably be accomplished
with a target specific node, but would still
require special handling of frame indexes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317671 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We shouldn't recurse any further but it doesn't mean we shouldn't be able to give the known bits for a constant. The caller would probably like that we always return the right answer for a constant RHS. This matches what InstCombine does in this case.
I don't have a test case because this showed up while trying to revive D31724.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D38967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316255 91177308-0d34-0410-b5e6-96231b3b80d8
Use less temporary APInts. Use bit counting more. Don't call getScalarSizeInBits so many places, just capture it once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315671 91177308-0d34-0410-b5e6-96231b3b80d8
Currently expandUnalignedLoad/Store uses place holder pointer info for temporary memory operand
in stack, which does not have correct address space. This causes unaligned private double16 load/store to be
lowered to flat_load instead of buffer_load for amdgcn target.
This fixes failures of OpenCL conformance test basic/vload_private/vstore_private on target amdgcn---amdgizcl.
Differential Revision: https://reviews.llvm.org/D35361
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314566 91177308-0d34-0410-b5e6-96231b3b80d8
This teach simplifyDemandedBits to handle constant splat vector shifts.
This required changing some uses of getZExtValue to getLimitedValue since we can't rely on legalization using getShiftAmountTy for the shift amount.
I believe there may have been a bug in the ((X << C1) >>u ShAmt) handling where we didn't check if the inner shift was too large. I've fixed that here.
I had to add new patterns to ARM because the zext/sext the patterns were trying to look for got turned into an any_extend with this patch. Happy to split that out too, but not sure how to test without this change.
Differential Revision: https://reviews.llvm.org/D37665
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314139 91177308-0d34-0410-b5e6-96231b3b80d8
This is the DAG equivalent of https://reviews.llvm.org/D32255 ,
which will hopefully be committed again. The functionality
(preferring a 'not' op) is already here in the DAG, so this is
just intended to be a clean-up and performance improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302087 91177308-0d34-0410-b5e6-96231b3b80d8
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301682 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301620 91177308-0d34-0410-b5e6-96231b3b80d8
This patch uses various APInt methods to reduce the number of temporary APInts. These were all found while working through converting SelectionDAG's computeKnownBits to also use the KnownBits struct recently added to the ValueTracking version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301618 91177308-0d34-0410-b5e6-96231b3b80d8
Build vectors have magical truncation powers, so we have things like this:
v4i1 = BUILD_VECTOR Constant:i32<1>, Constant:i32<1>, Constant:i32<1>, Constant:i32<1>
v4i16 = BUILD_VECTOR Constant:i32<1>, Constant:i32<1>, Constant:i32<1>, Constant:i32<1>
If we don't truncate the splat node returned by getConstantSplatNode(), then we won't find
truth when ZeroOrNegativeOneBooleanContent is the rule.
Differential Revision: https://reviews.llvm.org/D32505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301408 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301111 91177308-0d34-0410-b5e6-96231b3b80d8
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301019 91177308-0d34-0410-b5e6-96231b3b80d8
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300940 91177308-0d34-0410-b5e6-96231b3b80d8
