This removes the duplicate HVX instruction set for the 128-byte mode.
Single instruction set now works for both modes (64- and 128-byte).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313362 91177308-0d34-0410-b5e6-96231b3b80d8
It used to return the actual field value from the instruction descriptor.
There is no reason for that, that value is not interesting in any way and
the specifics of its encoding in the descriptor should not be exposed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313257 91177308-0d34-0410-b5e6-96231b3b80d8
Reserve an extra scavenging stack slot if the offset field in store-
-immediate instructions may overflow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306004 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301221 91177308-0d34-0410-b5e6-96231b3b80d8
For pairs of 32-bit registers: isub_lo, isub_hi.
For pairs of vector registers: vsub_lo, vsub_hi.
Add generic subreg indices: ps_sub_lo, ps_sub_hi, and a function
HexagonRegisterInfo::getHexagonSubRegIndex(RegClass, GenericSubreg)
that returns the appropriate subreg index for RegClass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286377 91177308-0d34-0410-b5e6-96231b3b80d8
After register allocation it is possible to have a spill of a register
that is only partially defined. That in itself it fine, but creates a
problem for double vector registers. Stores of such registers are pseudo
instructions that are expanded into pairs of individual vector stores,
and in case of a partially defined source, one of the stores may use
an entirely undefined register. To avoid this, track the defined parts
and only generate actual stores for those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284841 91177308-0d34-0410-b5e6-96231b3b80d8
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279698 91177308-0d34-0410-b5e6-96231b3b80d8
They can be deleted or replicated, so the cache may become outdated.
They only need to be visited once during frame lowering, so just scan
the function instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279297 91177308-0d34-0410-b5e6-96231b3b80d8
Floating point instructions use general purpose registers, so the few
instructions that can put floating point immediates into registers are,
in fact, integer instruction. Use them explicitly instead of having
pseudo-instructions specifically for dealing with floating point values.
Simplify the constant loading instructions (from sdata) to have only two:
one for 32-bit values and one for 64-bit values: CONST32 and CONST64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278244 91177308-0d34-0410-b5e6-96231b3b80d8
Scavenging slots were only reserved when pseudo-instruction expansion in
frame lowering created new virtual registers. It is possible to still
need a scavenging slot even if no virtual registers were created, in cases
where the stack is large enough to overflow instruction offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277355 91177308-0d34-0410-b5e6-96231b3b80d8
Normally, CFI instructions should be inserted after allocframe, but
if allocframe is in the same packet with a call, the CFI instructions
should be inserted before that packet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277020 91177308-0d34-0410-b5e6-96231b3b80d8
The callee-saved registers that are saved in a function are not pristine,
and so they can be defined and used. In case of shrink-wrapping though,
there are blocks that are outside of the save/restore range, and in those
blocks the saved registers must be treated as pristine. To avoid any uses
of these registers, add them as live-in in all those blocks.
This was already done for blocks reaching function exits after restore,
add code that does the same for blocks reached from the function entry
before save.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276886 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274189 91177308-0d34-0410-b5e6-96231b3b80d8
I think this converts all the simple cases that really just care about
the generated code being position independent or not. The remaining
uses are a bit more complicated and are checking things like "is this
a library or executable" or "can this symbol be preempted".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274055 91177308-0d34-0410-b5e6-96231b3b80d8
The aggressive anti-dependency breaker can rename the restored callee-
saved registers. To prevent this, mark these registers are live on all
paths to the return/tail-call instructions, and add implicit use operands
for them to these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270898 91177308-0d34-0410-b5e6-96231b3b80d8
When generating .cfi_offset instructions, make sure that the offset is
calculated with respect to the register used to define the CFA (which is
currently always FP+8).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269191 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds the same checks that were added in r264593 to all
target-specific passes that run after register allocation.
Reviewers: qcolombet
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18525
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265313 91177308-0d34-0410-b5e6-96231b3b80d8
Krzysztof Parzyszek