Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.
Patch by Xiaoyi Guo!
This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182885 91177308-0d34-0410-b5e6-96231b3b80d8
This patch solves the problem of numeric register values not being accepted:
../set_alias.s:1:11: error: expected valid expression after comma
.set r4,$4
^
The parsing of .set directive is changed and handling of symbols in code
as well to enable this feature.
The test example is added.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182807 91177308-0d34-0410-b5e6-96231b3b80d8
Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182703 91177308-0d34-0410-b5e6-96231b3b80d8
There was exactly one caller using this API right, the others were relying on
specific behavior of the default implementation. Since it's too hard to use it
right just remove it and standardize on the default behavior.
Defines away PR16132.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182636 91177308-0d34-0410-b5e6-96231b3b80d8
pic calls. These need to be there so we don't try and use helper
functions when we call those.
As part of this, make sure that we properly exclude helper functions in pic
mode when indirect calls are involved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182343 91177308-0d34-0410-b5e6-96231b3b80d8
By default, a teq instruction is inserted after integer divide. No divide-by-zero
checks are performed if option "-mnocheck-zero-division" is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182306 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, three instructions were needed:
trunc.w.s $f0, $f2
mfc1 $4, $f0
sw $4, 0($2)
Now we need only two:
trunc.w.s $f0, $f2
swc1 $f0, 0($2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes alias definition for addiu $rs,$imm
and instead uses the TwoOperandAliasConstraint field in
the ArithLogicI instruction class.
This way all instructions that inherit ArithLogicI class
have the same macro defined.
The usage examples are added to test files.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182048 91177308-0d34-0410-b5e6-96231b3b80d8
invalid instruction sequence.
Rather than emitting an int-to-FP move instruction and an int-to-FP conversion
instruction during instruction selection, we emit a pseudo instruction which gets
expanded post-RA. Without this change, register allocation can possibly insert a
floating point register move instruction between the two instructions, which is not
valid according to the ISA manual.
mtc1 $f4, $4 # int-to-fp move instruction.
mov.s $f2, $f4 # move contents of $f4 to $f2.
cvt.s.w $f0, $f2 # int-to-fp conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182042 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds bnez and beqz instructions which represent alias definitions for bne and beq instructions as follows:
bnez $rs,$imm => bne $rs,$zero,$imm
beqz $rs,$imm => beq $rs,$zero,$imm
The corresponding test cases are added.
Patch by Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182040 91177308-0d34-0410-b5e6-96231b3b80d8
This creates stubs that help Mips32 functions call Mips16
functions which have floating point parameters that are normally passed
in floating point registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181972 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16/32 floating point interoperability.
When Mips16 code calls external functions that would normally have some
of its parameters or return values passed in floating point registers,
it needs (Mips32) helper functions to do this because while in Mips16 mode
there is no ability to access the floating point registers.
In Pic mode, this is done with a set of predefined functions in libc.
This case is already handled in llvm for Mips16.
In static relocation mode, for efficiency reasons, the compiler generates
stubs that the linker will use if it turns out that the external function
is a Mips32 function. (If it's Mips16, then it does not need the helper
stubs).
These stubs are identically named and the linker knows about these tricks
and will not create multiple copies and will delete them if they are not
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181753 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds alias for addiu instruction which enables following syntax:
addiu $rs,imm
The macro is translated as:
addiu $rs,$rs,imm
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181729 91177308-0d34-0410-b5e6-96231b3b80d8
This option is used when the user wants to avoid emitting double precision FP
loads and stores. Double precision FP loads and stores are expanded to single
precision instructions after register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181718 91177308-0d34-0410-b5e6-96231b3b80d8
It was just a less powerful and more confusing version of
MCCFIInstruction. A side effect is that, since MCCFIInstruction uses
dwarf register numbers, calls to getDwarfRegNum are pushed out, which
should allow further simplifications.
I left the MachineModuleInfo::addFrameMove interface unchanged since
this patch was already fairly big.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181680 91177308-0d34-0410-b5e6-96231b3b80d8
To add a frame now there is a dedicated addFrameMove which also takes
care of constructing the move itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181657 91177308-0d34-0410-b5e6-96231b3b80d8
mips16/mips32 floating point interoperability.
This patch fixes returns from mips16 functions so that if the function
was in fact called by a mips32 hard float routine, then values
that would have been returned in floating point registers are so returned.
Mips16 mode has no floating point instructions so there is no way to
load values into floating point registers.
This is needed when returning float, double, single complex, double complex
in the Mips ABI.
Helper functions in libc for mips16 are available to do this.
For efficiency purposes, these helper functions have a different calling
convention from normal Mips calls.
Registers v0,v1,a0,a1 are used to pass parameters instead of
a0,a1,a2,a3.
This is because v0,v1,a0,a1 are the natural registers used to return
floating point values in soft float. These values can then be moved
to the appropriate floating point registers with no extra cost.
The only register that is modified is ra in this call.
The helper functions make sure that the return values are in the floating
point registers that they would be in if soft float was not in effect
(which it is for mips16, though the soft float is implemented using a mips32
library that uses hard float).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181641 91177308-0d34-0410-b5e6-96231b3b80d8
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181041 91177308-0d34-0410-b5e6-96231b3b80d8
register.
- Define pseudo instructions which store or load ccond field of the DSP
control register.
- Emit the pseudos in MipsSEInstrInfo::storeRegToStack and loadRegFromStack.
- Expand the pseudos before callee-scan save.
- Emit instructions RDDSP or WRDSP to copy between ccond field and GPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180969 91177308-0d34-0410-b5e6-96231b3b80d8
Expand copy instructions between two accumulator registers before callee-saved
scan is done. Handle copies between integer GPR and hi/lo registers in
MipsSEInstrInfo::copyPhysReg. Delete pseudo-copy instructions that are not
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180827 91177308-0d34-0410-b5e6-96231b3b80d8
Mips have delayslots for certain instructions
like jumps and branches. These are instructions
that follow the branch or jump and are executed
before the jump or branch is completed.
Early Mips compilers could not cope with delayslots
and left them up to the assembler. The assembler would
fill the delayslots with the appropriate instruction,
usually just a nop to allow correct runtime behavior.
The default behavior for this is set with .set reorder.
To tell the assembler that you don't want it to mess with
the delayslot one used .set noreorder.
For backwards compatibility we need to support
.set reorder and have it be the default behavior in the
assembler.
Our support for it is to insert a NOP directly after an
instruction with a delayslot when in .set reorder mode.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180584 91177308-0d34-0410-b5e6-96231b3b80d8
