filler such as if delay slot filler have to put NOP instruction into the
delay slot of microMIPS BEQ or BNE instruction which uses the register $0,
then instead of emitting NOP this instruction is replaced by the corresponding
microMIPS compact branch instruction, i.e. BEQZC or BNEZC.
Differential Revision: http://reviews.llvm.org/D3566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222580 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221948 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch enables code generation for the MIPS II target. Pre-Mips32
targets don't have the MUL instruction, so we add the correspondent
pattern that uses the MULT/MFLO combination in order to retrieve the
product.
This is WIP as we don't support code generation for select nodes due to
the lack of conditional-move instructions.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6150
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221686 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
... and after all that refactoring, it's possible to distinguish softfloat
floating point values from integers so this patch no longer breaks softfloat to
do it.
Remove direct handling of i32's in the N32/N64 ABI by promoting them to
i64. This more closely reflects the ABI documentation and also fixes
problems with stack arguments on big-endian targets.
We now rely on signext/zeroext annotations (already generated by clang) and
the Assert[SZ]ext nodes to avoid the introduction of unnecessary sign/zero
extends.
It was not possible to convert three tests to use signext/zeroext. These tests
are bswap.ll, ctlz-v.ll, ctlz-v.ll. It's not possible to put signext on a
vector type so we just accept the sign extends here for now. These tests don't
pass the vectors the same way clang does (clang puts multiple elements in the
same argument, these map 1 element to 1 argument) so we don't need to worry too
much about it.
With this patch, all known N32/N64 bugs should be fixed and we now pass the
first 10,000 tests generated by ABITest.py.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221534 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently, we give an error if %z is used with non-immediates, instead of continuing as if the %z isn't there.
For example, you use the %z operand modifier along with the "Jr" constraints ("r" makes the operand a register, and "J" makes it an immediate, but only if its value is 0).
In this case, you want the compiler to print "$0" if the inline asm input operand turns out to be an immediate zero and you want it to print the register containing the operand, if it's not.
We give an error in the latter case, and we shouldn't (GCC also doesn't).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221453 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Most structs were fixed by r218451 but those of between >32-bits and
<64-bits remained broken since they were not marked with [ASZ]ExtUpper.
This patch fixes the remaining cases by using
CCPromoteToUpperBitsInType<i64> on i64's in addition to i32 and smaller.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220556 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219931 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement the most basic form of conditional branches in Mips fast-isel.
Test Plan:
br1.ll
run 4 flavors of test-suite. mips32 r1/r2 and at -O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5583
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219556 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Add the ability to convert 64 or 32 bit floating point values to integer in mips fast-isel
Test Plan:
fpintconv.ll
ran 4 flavors of test-suite with no errors, misp32 r1/r2 O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler, mcrosier
Differential Revision: http://reviews.llvm.org/D5562
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219511 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
According to the ABI documentation, f128 and {f128} should both be returned
in $f0 and $f2. However, this doesn't match GCC's behaviour which is to
return f128 in $f0 and $f2, but {f128} in $f0 and $f1.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219196 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement conversion of 64 to 32 bit floating point numbers (fptrunc) in mips fast-isel
Test Plan:
fptrunc.ll
checked also with 4 internal mips build bot flavors mip32r1/miprs32r2 and at -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: rfuhler
Differential Revision: http://reviews.llvm.org/D5553
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218785 91177308-0d34-0410-b5e6-96231b3b80d8
map, this makes sure that we can compile the same code for two different
ABIs (hard and soft float) in the same module.
Update one testcase accordingly (and fix some confusing naming) and
add a new testcase as well with the ordering swapped which would
highlight the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218632 91177308-0d34-0410-b5e6-96231b3b80d8
based on the Function. This is currently used to implement
mips16 support in the mips backend via the existing module
pass resetting the subtarget.
Things to note:
a) This involved running resetTargetOptions before creating a
new subtarget so that code generation options like soft-float
could be recognized when creating the new subtarget. This is
to deal with initialization code in isel lowering that only
paid attention to the initial value.
b) Many of the existing testcases weren't using the soft-float
feature correctly. I've corrected these based on the check
values assuming that was the desired behavior.
c) The mips port now pays attention to the target-cpu and
target-features strings when generating code for a particular
function. I've removed these from one function where the
requested cpu and features didn't match the check lines in
the testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218492 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218451 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Expand list of supported targets for Mips to include mips32 r1.
Previously it only include r2. More patches are coming where there is
a difference but in the current patches as pushed upstream, r1 and r2
are equivalent.
Test Plan:
simplestorefp1.ll
add new build bots at mips to test this flavor at both -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217821 91177308-0d34-0410-b5e6-96231b3b80d8
We have been using .init-array for most systems for quiet some time,
but tools like llc are still defaulting to .ctors because the old
option was never changed.
This patch makes llc default to .init-array and changes the option to
be -use-ctors.
Clang is not affected by this. It has its own fancier logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216905 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is done by removing some hardcoded registers like $at or expecting a single digit register to be selected.
Contains work done by Matheus Almeida.
Reviewers: matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu
Differential Revision: http://reviews.llvm.org/D4227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215640 91177308-0d34-0410-b5e6-96231b3b80d8
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215211 91177308-0d34-0410-b5e6-96231b3b80d8
a base GOT entry.
Summary:
get tip of tree mips fast-isel to pass test-suite
Two bugs were fixed:
1) one bit booleans were treated as 1 bit signed integers and so the literal '1' could become sign extended.
2) mips uses got for pic but in certain cases, as with string constants for example, many items can be referenced from the same got entry and this case was not handled properly.
Test Plan: test-suite
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D4801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215155 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Big-endian mode was not correctly adjusting the offset for types smaller
than an ABI slot.
Fixes PR19612
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: sstankovic, llvm-commits
Differential Revision: http://reviews.llvm.org/D4556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214493 91177308-0d34-0410-b5e6-96231b3b80d8
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.
This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.
This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).
I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.
With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).
Differential Revision: http://reviews.llvm.org/D4638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213898 91177308-0d34-0410-b5e6-96231b3b80d8
