Instead, we're going to separate metadata from the Value hierarchy. See
PR21532.
This reverts commit r221375.
This reverts commit r221373.
This reverts commit r221359.
This reverts commit r221167.
This reverts commit r221027.
This reverts commit r221024.
This reverts commit r221023.
This reverts commit r220995.
This reverts commit r220994.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221711 91177308-0d34-0410-b5e6-96231b3b80d8
What would happen before that commit is that the SDDbgValues associated with
a deallocated SDNode would be marked Invalidated, but SDDbgInfo would keep
a map entry keyed by the SDNode pointer pointing to this list of invalidated
SDDbgNodes. As the memory gets reused, the list might get wrongly associated
with another new SDNode. As the SDDbgValues are cloned when they are transfered,
this can lead to an exponential number of SDDbgValues being produced during
DAGCombine like in http://llvm.org/bugs/show_bug.cgi?id=20893
Note that the previous behavior wasn't really buggy as the invalidation made
sure that the SDDbgValues won't be used. This commit can be considered a
memory optimization and as such is really hard to validate in a unit-test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221709 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a new pass that can inject checks before indirect calls to
make sure that these calls target known locations. It supports three types of
checks and, at compile time, it can take the name of a custom function to call
when an indirect call check fails. The default failure function ignores the
error and continues.
This pass incidentally moves the function JumpInstrTables::transformType from
private to public and makes it static (with a new argument that specifies the
table type to use); this is so that the CFI code can transform function types
at call sites to determine which jump-instruction table to use for the check at
that site.
Also, this removes support for jumptables in ARM, pending further performance
analysis and discussion.
Review: http://reviews.llvm.org/D4167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221708 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM replaces the SelectionDAG pattern (xor (set_cc cc x y) 1) with
(set_cc !cc x y), which is only correct when the xor has type i1.
Instead, we should check that the constant operand to the xor is all
ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221693 91177308-0d34-0410-b5e6-96231b3b80d8
We already use the llvm namespace. Remove the unnecessary prefix. Use the
StringRef::equals method to compare with C strings rather than instantiating
std::strings.
Addresses late review comments from David Majnemer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221564 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces the symbol rewriter. This is an IR->IR transformation that is
implemented as a CodeGenPrepare pass. This allows for the transparent
adjustment of the symbols during compilation.
It provides a clean, simple, elegant solution for symbol inter-positioning. This
technique is often used, such as in the various sanitizers and performance
analysis.
The control of this is via a custom YAML syntax map file that indicates source
to destination mapping, so as to avoid having the compiler to know the exact
details of the source to destination transformations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221548 91177308-0d34-0410-b5e6-96231b3b80d8
On 32 bit windows we use label differences and .set does not suppress
rolocations, a combination that was not used before r220256.
This fixes PR21497.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221456 91177308-0d34-0410-b5e6-96231b3b80d8
If a section cannot be dead stripped, it is safe to use L symbols, since
the linker will keep all of it in the end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221431 91177308-0d34-0410-b5e6-96231b3b80d8
Change `NamedMDNode::getOperator()` from returning `MDNode *` to
returning `Value *`. To reduce boilerplate at some call sites, add a
`getOperatorAsMDNode()` for named metadata that's expected to only
return `MDNode` -- for now, that's everything, but debug node named
metadata (such as llvm.dbg.cu and llvm.dbg.sp) will soon change. This
is part of PR21433.
Note that there's a follow-up patch to clang for the API change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221375 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves the folding of vector AND nodes into blend operations for
targets that feature SSE4.1. A vector AND node where one of the operands is
a constant build_vector with elements that are either zero or all-ones can be
converted into a blend.
This allows for example to simplify the following code:
define <4 x i32> @test(<4 x i32> %A, <4 x i32> %B) {
%1 = and <4 x i32> %A, <i32 0, i32 0, i32 0, i32 -1>
%2 = and <4 x i32> %B, <i32 -1, i32 -1, i32 -1, i32 0>
%3 = or <4 x i32> %1, %2
ret <4 x i32> %3
}
Before this patch llc (-mcpu=corei7) generated:
andps LCPI1_0(%rip), %xmm0, %xmm0
andps LCPI1_1(%rip), %xmm1, %xmm1
orps %xmm1, %xmm0, %xmm0
retq
With this patch we generate a single 'vpblendw'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221343 91177308-0d34-0410-b5e6-96231b3b80d8
Clang -gsplit-dwarf self-host -O0, binary increases by 0.0005%, -O2,
binary increases by 25%.
A large binary inside Google, split-dwarf, -O0, and other internal flags
(GDB index, etc) increases by 1.8%, optimized build is 35%.
The size impact may be somewhat greater in .o files (I haven't measured
that much - since the linked executable -O0 numbers seemed low enough)
due to relocations. These relocations could be removed if we taught the
llvm-symbolizer to handle indexed addressing in the .o file (GDB can't
cope with this just yet, but GDB won't be reading this info anyway).
Also debug_ranges could be shared between .o and .dwo, though ideally
debug_ranges would get a schema that could used index(+offset)
addressing, and move to the .dwo file, then we'd be back to sharing
addresses in the address pool again.
But for now, these sizes seem small enough to go ahead with this.
Verified that no other DW_TAGs are produced into the .o file other than
subprograms and inlined_subroutines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221306 91177308-0d34-0410-b5e6-96231b3b80d8
Registers are not all equal. Some are not allocatable (infinite cost),
some have to be preserved but can be used, and some others are just free
to use.
Ensure there is a cost hierarchy reflecting this fact, so that the
allocator will favor scratch registers over callee-saved registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221293 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves how the different costs (register, interference, spill
and coalescing) relates together. The assumption is now that:
- coalescing (or any other "side effect" of reg alloc) is negative, and
instead of being derived from a spill cost, they use the block
frequency info.
- spill costs are in the [MinSpillCost:+inf( range
- register or interference costs are in [0.0:MinSpillCost( or +inf
The current MinSpillCost is set to 10.0, which is a random value high
enough that the current constraint builders do not need to worry about
when settings costs. It would however be worth adding a normalization
step for register and interference costs as the last step in the
constraint builder chain to ensure they are not greater than SpillMinCost
(unless this has some sense for some architectures). This would work well
with the current builder pipeline, where all costs are tweaked relatively
to each others, but could grow above MinSpillCost if the pipeline is
deep enough.
The current heuristic is tuned to depend rather on the number of uses of
a live interval rather than a density of uses, as used by the greedy
allocator. This heuristic provides a few percent improvement on a number
of benchmarks (eembc, spec, ...) and will definitely need to change once
spill placement is implemented: the current spill placement is really
ineficient, so making the cost proportionnal to the number of use is a
clear win.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221292 91177308-0d34-0410-b5e6-96231b3b80d8
This is experimental, just barely enough to get things to not
immediately combust.
A note for those who are curious:
Only lld can successfully link the object files, other linkers truncate
the section names making the debug sections illegible to debuggers.
Even with this in mind, we believe we are having trouble with SECREL
relocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221245 91177308-0d34-0410-b5e6-96231b3b80d8
the tombstone or empty keys of a DenseMap<int64_t, T>. This patch
fixes the issue (and adds a tests case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221214 91177308-0d34-0410-b5e6-96231b3b80d8
This generalizes the range handling for ranges in both the skeleton and
full unit, laying the foundation for the addition of more ranges (rather
than just the CU's special case) in the skeleton CU with fission+gmlt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221202 91177308-0d34-0410-b5e6-96231b3b80d8
So that it may be shared between skeleton/full compile unit, for CU
ranges and other ranges to be added for fission+gmlt.
(at some point we might want some kind of object shared between the
skeleton and full compile units for all those things we only want one of
in that scope, rather than having the full unit always look through to
the skeleton... - alternatively, we might be able to have the skeleton
pointer (or another, separate pointer) point to the skeleton or to the
unit itself in non-fission, so we don't have to special case its
absence)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221186 91177308-0d34-0410-b5e6-96231b3b80d8
This is one of a few steps to generalize range handling to include the
CU range (thus the CU's range list will be moved into the range list
list, losing track of the base address in the process), which means
generalizing ranges from both the skeleton and full unit under fission.
And... then I can used that generalized support for ranges in
fission+gmlt where there'll be a bunch more ranges in the skeleton.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221182 91177308-0d34-0410-b5e6-96231b3b80d8
call DAGCombiner. But we ran into a case (on Windows) where the
calling convention causes argument lowering to bail out of fast-isel,
and we end up in CodeGenAndEmitDAG() which does run DAGCombiner.
So, we need to make DAGCombiner check for 'optnone' after all.
Commit includes the test that found this, plus another one that got
missed in the original optnone work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221168 91177308-0d34-0410-b5e6-96231b3b80d8
When LLVM emits DWARF call frame information, it currently creates a local,
section-relative symbol in the code section, which is pointed to by a
relocation on the .eh_frame section. However, for C++ we emit some functions in
section groups, and the SysV ABI has some rules to make it easier to remove
these sections
(http://www.sco.com/developers/gabi/latest/ch4.sheader.html#section_group_rules):
A symbol table entry with STB_LOCAL binding that is defined relative to one
of a group's sections, and that is contained in a symbol table section that is
not part of the group, must be discarded if the group members are discarded.
References to this symbol table entry from outside the group are not allowed.
This means that we need to use the function symbol for the relocation, not a
temporary symbol.
There was a comment in the code claiming that the local symbol was used to
avoid creating a relocation, but a relocation must be created anyway as the
code and CFI are in different sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221150 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we only need to emit skeleton strings into the CU header and
we do this by explicitly calling "addLocalString". With gmlt-in-fission,
we'll be emitting a bunch of other strings from other codepaths where
it's not statically known that these strings will be local or not.
Introduce a virtual function to indicate whether this unit is a DWO unit
or not (I'm not sure if we have a good term for this, the
opposite/alternative to 'skeleton' unit) and use that to generalize the
string emission logic so that strings can be correctly emitted in both
the skeleton and dwo unit when in split dwarf mode.
And to demonstrate that this works, switch the existing special callers
of addLocalString in the skeleton builder to addString - and they still
work. Yay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221094 91177308-0d34-0410-b5e6-96231b3b80d8
This is a useful distinction/invariant/delination to make because
LineTablesOnly mode is never relevant to type units, so it's clear that
we're not doing weird line-tables-only-with-types by making this API
choice.
It also lays the foundations nicely for adding gmlt-like data to fission
skeleton CUs while limiting the effects to CUs and not TUs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221093 91177308-0d34-0410-b5e6-96231b3b80d8
(these will shortly become virtual, with a null implementation in
DwarfUnit (since type units don't have accelerator tables in the current
schema) and the current implementation down in DwarfCompileUnit, moving
the actual maps there too)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221082 91177308-0d34-0410-b5e6-96231b3b80d8
This would help catch cases where we might otherwise try to reference a
dwo CU label, which would be weird - because without relocations in the
dwo file it's not generally meaningful to talk about the CU offsets
there (or, if it is, we can do so in absolute terms without using a
relocation to compute it).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221078 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the CU label to be emitted only for compile units, as
they're the only ones that need it (so they can be referenced from
pubnames)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221072 91177308-0d34-0410-b5e6-96231b3b80d8
This was a compile-unit specific label (unused in type units) and seems
unnecessary anyway when we can more easily directly compute the size of
the compile unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221067 91177308-0d34-0410-b5e6-96231b3b80d8
