MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238539 91177308-0d34-0410-b5e6-96231b3b80d8
About pristine regsiters:
Pristine registers "hold a value that is useless to the current
function, but that must be preserved - they are callee saved registers
that have not been saved." This concept saves compile time as it frees
the prologue/epilogue inserter from adding every such register to every
basic blocks live-in list.
However the current code in getPristineRegs is formulated in a
complicated way: Inside the function prologue and epilogue all callee
saves are considered pristine, while in the rest of the code only the
non-saved ones are considered pristine. This requires logic to
differentiate between prologue/epilogue and the rest and in the presence
of shrink-wrapping this even becomes complicated/expensive. It's also
unnecessary because the prologue epilogue inserters already mark
callee-save registers that are saved/restores properly in the respective
blocks in the prologue/epilogue (see updateLiveness() in
PrologueEpilogueInserter.cpp). So only declaring non-saved/restored
callee saved registers as pristine just works.
Differential Revision: http://reviews.llvm.org/D10101
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238524 91177308-0d34-0410-b5e6-96231b3b80d8
This is in preparation for reusing this for 32-bit x86 EH table
emission. Also updates the type name for consistency. NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238521 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces a serializable structure called
'llvm::yaml::MachineFunction' that stores the machine
function's name. This structure will mirror the machine
function's state in the future.
This commit prints machine functions as YAML documents
containing a YAML mapping that stores the state of a machine
function. This commit also parses the YAML documents
that contain the machine functions.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238519 91177308-0d34-0410-b5e6-96231b3b80d8
This moves all the state numbering code for C++ EH to WinEHPrepare so
that we can call it from the X86 state numbering IR pass that runs
before isel.
Now we just call the same state numbering machinery and insert a bunch
of stores. It also populates MachineModuleInfo with information about
the current function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238514 91177308-0d34-0410-b5e6-96231b3b80d8
The shift amount may be too small to cope with promoted left hand side,
make sure to promote it as well.
This fixes PR23664.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238503 91177308-0d34-0410-b5e6-96231b3b80d8
DIEAbbrev contains a SmallVector that can leak for overly large abbrevs. They
used to be owned by the DIE, but after the recent refactoring DWARFFile
allocates its own abbrevs.
Leak found by asan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238418 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DIE::addChild()` to return a reference to the just-added node,
and update consumers to use it directly. An upcoming commit will
abstract away (and eventually change) the underlying storage of
`DIE::Children`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238372 91177308-0d34-0410-b5e6-96231b3b80d8
Stop storing a `DIEAbbrev` in `DIE`, since the data fits neatly inside
the `DIEValue` list. Besides being a cleaner data structure (avoiding
the parallel arrays), this gives us more freedom to rearrange the
`DIEValue` list.
This fixes the temporary memory regression from 845 MB up to 879 MB, and
drops it further to 829 MB for a net memory decrease of around 1.9%
(incremental decrease around 5.7%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238364 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r238350, effectively reapplying r238349 after fixing
(all?) the problems, all somehow related to how I was using
`AlignedArrayCharUnion<>` inside `DIEValue`:
- MSVC can only handle `sizeof()` on types, not values. Change the
assert.
- GCC doesn't know the `is_trivially_copyable` type trait. Instead of
asserting it, add destructors.
- Call placement new even when constructing POD (i.e., the pointers).
- Instead of copying the char buffer, copy the casted classes.
I've left in a couple of `static_assert`s that I think both MSVC and GCC
know how to handle. If the bots disagree with me, I'll remove them.
- Check that the constructed type is either standard layout or a
pointer. This protects against a programming error: we really want
the "small" `DIEValue`s to be small and simple, so don't
accidentally change them not to be.
- Similarly, check that the size of the buffer is no bigger than a
`uint64_t` or a pointer. (I thought checking against
`sizeof(uint64_t)` would be good enough, but Chandler suggested that
pointers might sometimes be bigger than that in the context of
sanitizers.)
I've also committed r238359 in the meantime, which introduces a
DIEValue.def to simplify dispatching between the various types (thanks
to a review comment by David Blaikie). Without that, this commit would
be almost unintelligible.
Here's the original commit message:
--
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
--
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238362 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r238349, since it caused some errors on bots:
- std::is_trivially_copyable isn't available until GCC 5.0.
- It was complaining about strict aliasing with my use of
ArrayCharUnion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238350 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238349 91177308-0d34-0410-b5e6-96231b3b80d8
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238341 91177308-0d34-0410-b5e6-96231b3b80d8
the target can handle a given basic block as prologue
or epilogue.
Related to <rdar://problem/20821487>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238292 91177308-0d34-0410-b5e6-96231b3b80d8
- Clean documentation comment
- Change the API to accept an iterator so you can actually pass
MachineBasicBlock::end() now.
- Add more "const".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238288 91177308-0d34-0410-b5e6-96231b3b80d8
This was resulting in the addrspacecast being removed and incorrectly
replaced with a ptrtoint when sinking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238217 91177308-0d34-0410-b5e6-96231b3b80d8
Stop creating symbols we don't need in `DwarfStringPool`. The consumers
only call `DwarfStringPoolEntryRef::getSymbol()` when DWARF is
relocatable, so this just stops creating the unused symbols when it's
not. This drops memory usage from 851 MB to 845 MB, around 0.7%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238122 91177308-0d34-0410-b5e6-96231b3b80d8
Mint a new function, `AsmPrinter::emitDwarfStringOffset()`, which takes
a `DwarfStringPoolEntryRef`. When DWARF is relocatable across sections,
this defers to `emitSectionOffset()` and emits the `MCSymbol`;
otherwise, just emit the offset directly, without using any intermediate
symbols.
`EmitLabelDifference()` is already optimized to emit absolute label
differences cheaply when possible, so there aren't any major memory
savings here (853 MB down to 851 MB, or 0.2%). However, it prepares for
making the `MCSymbol`s in the `DwarfStringPool` optional.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238119 91177308-0d34-0410-b5e6-96231b3b80d8
Expose the `DwarfStringPool` entry in a header, and store a pointer to
it directly in `DIEString`. Instead of choosing at creation time how to
emit it, use the `dwarf::Form` to determine that at emission time.
Besides avoiding the other `DIEValue`, this shaves two pointers off of
`DIEString`; the data is now a single pointer. This is a nice cleanup
on its own -- and drops memory usage from 861 MB down to 853 MB, around
0.9% -- but it's also preparation for passing `DIEValue`s by value.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238117 91177308-0d34-0410-b5e6-96231b3b80d8
Extract out `DwarfStringPoolEntry` and `DwarfStringPoolRef` from
`DwarfStringPool` so that downstream users can start using
`DwarfStringPool::getEntry()` directly. This will allow users to delay
the decision between emitting a symbol or an offset until later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238116 91177308-0d34-0410-b5e6-96231b3b80d8
Change `DwarfStringPool` to calculate byte offsets on-the-fly, and
update `DwarfUnit::getLocalString()` to use a `DIEInteger` instead of a
`DIEDelta` when Dwarf doesn't use relocations (i.e., Mach-O). This
eliminates another call to `EmitLabelDifference()`, and drops memory
usage from 865 MB down to 861 MB, around 0.5%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238114 91177308-0d34-0410-b5e6-96231b3b80d8
Move `DwarfStringPool`'s `getEntry()` to the header (and make it a
member function) in preparation for calculating symbol offsets
on-the-fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238112 91177308-0d34-0410-b5e6-96231b3b80d8
On GPU targets, materializing constants is cheap and stores are
expensive, so only doing this for zero vectors was silly.
Most of the new testcases aren't optimally merged, and are for
later improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238108 91177308-0d34-0410-b5e6-96231b3b80d8
Remove all virtual functions from `DIEValue`, dropping the vtable
pointer from its layout. Instead, create "impl" functions on the
subclasses, and use the `DIEValue::Type` to implement the dynamic
dispatch.
This is necessary -- obviously not sufficient -- for passing `DIEValue`s
around by value. However, this change stands on its own: we make tons
of these. I measured a drop in memory usage from 888 MB down to 860 MB,
or around 3.2%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238084 91177308-0d34-0410-b5e6-96231b3b80d8
This is part of the work to remove TargetMachine::resetTargetOptions.
In this patch, instead of updating global variable NoFramePointerElim in
resetTargetOptions, its use in DisableFramePointerElim is replaced with a call
to TargetFrameLowering::noFramePointerElim. This function determines on a
per-function basis if frame pointer elimination should be disabled.
There is no change in functionality except that cl:opt option "disable-fp-elim"
can now override function attribute "no-frame-pointer-elim".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238080 91177308-0d34-0410-b5e6-96231b3b80d8
This is in preparation to making changes needed to stop resetting
NoFramePointerElim in resetTargetOptions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238079 91177308-0d34-0410-b5e6-96231b3b80d8
The usual CodeGenPrepare trickery, on a target-specific intrinsic.
Without this, the expansion of atomics will usually have the zext
be hoisted out of the loop, defeating the various patterns we have
to catch this precise case.
Differential Revision: http://reviews.llvm.org/D9930
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238054 91177308-0d34-0410-b5e6-96231b3b80d8
This change to VirtRegRewriter::addMBBLiveIns adds live-in registers for each
MachineBasicBlock's LiveIns set without isLiveIn checks as they are being added
because doing so is expensive. After all live-in registers are added, the LiveIn
vectors are sorted and uniqued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238008 91177308-0d34-0410-b5e6-96231b3b80d8
