The low-overhead branch extension provides a loop-end 'LE' instruction
that performs no decrement nor compare, it just jumps backwards. This
patch modifies the constant islands pass to try to insert LE
instructions in place of a Thumb2 conditional branch, instead of
shrinking it. This only happens if a cmp can be converted to a cbn/z
and used to exit the loop.
Differential Revision: https://reviews.llvm.org/D67404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372085 91177308-0d34-0410-b5e6-96231b3b80d8
We use `< UP.Threshold` later on, so we should use LoopSize + 1, to
allow unrolling if the result won't exceed to loop size.
Fixes PR43305.
Reviewers: efriedma, dmgreen, paquette
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D67594
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372084 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds -Oz as option and also properly enables support for -Os.
Currently, the existing check for -Os is dead, because the enclosing if
only checks of O1, O2 and O3.
There is still a difference between the -Oz pipeline compared to opt,
but I have not been able to track that down yet.
Reviewers: bogner, sebpop, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D67593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372079 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This patch introduces a helper struct `AnalysisGetter` to put together analysis getters. In this patch, a getter for `AAResult` is also added for `noalias`.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67603
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372072 91177308-0d34-0410-b5e6-96231b3b80d8
This makes git-llvm more of a thin wrapper around git while temporarily
maintaining backwards compatibility with past git-llvm behavior.
Using @{upstream} makes git-llvm more robust when used with a nontrivial
local repository.
https://reviews.llvm.org/D67389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372070 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we tried to split them into narrower v64i1 or v16i1
pieces that each got promoted to vXi8 and then passed in a zmm
or xmm register. But this crashes when you need to pass more
pieces than available registers reserved for argument passing.
The scalarizing done here generates much longer and slower code,
but is consistent with the behavior of avx2 and earlier targets
for these types.
Fixes PR43323.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372069 91177308-0d34-0410-b5e6-96231b3b80d8
The BLENDM instructions allow an 2 sources and an independent
destination while masked VBROADCAST has the destination tied
to the source.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372068 91177308-0d34-0410-b5e6-96231b3b80d8
r371901 was overeager and widenScalarDst() and the like in the legalizer
attempt to increment the insert point given in order to add new instructions
after the currently legalizing inst. In cases where the insertion point is not
exactly the current instruction, then callers need to de-compensate for the
behaviour by decrementing the insertion iterator before calling them. It's not
a nice state of affairs, for now just undo the problematic parts of the change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372050 91177308-0d34-0410-b5e6-96231b3b80d8
Add the missing piece of r372029.
Somehow when the patch for review D61961 was committed, only the test case
went in and the code didn't. This of course caused all kinds of build bot
breaks.
This patch just adds the code for that patch.
Author: Lei Huang
Differential revision: https://reviews.llvm.org/D61961
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372043 91177308-0d34-0410-b5e6-96231b3b80d8
It should be allowed to take a string table in case all the strings in
the remarks point there, but it shouldn't use it during serialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372042 91177308-0d34-0410-b5e6-96231b3b80d8
When using lit's internal shell, RUN lines like the following
accidentally execute an external `diff` instead of lit's internal
`diff`:
```
# RUN: program | diff file -
# RUN: not diff file1 file2 | FileCheck %s
```
Such cases exist now, in `clang/test/Analysis` for example. We are
preparing patches to ensure lit's internal `diff` is called in such
cases, which will then fail because lit's internal `diff` cannot
currently be used in pipelines and doesn't recognize `-` as a
command-line option.
To enable pipelines, this patch moves lit's `diff` implementation into
an out-of-process script, similar to lit's `cat` implementation. A
follow-up patch will implement `-` to mean stdin.
Reviewed By: probinson, stella.stamenova
Differential Revision: https://reviews.llvm.org/D66574
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372035 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up patch from https://reviews.llvm.org/D57857 to handle
extract_subvector v4f32. For cases where we fpext of v2f32 to v2f64 from
extract_subvector we currently generate on P9 the following:
lxv 0, 0(3)
xxsldwi 1, 0, 0, 1
xscvspdpn 2, 0
xxsldwi 3, 0, 0, 3
xxswapd 0, 0
xscvspdpn 1, 1
xscvspdpn 3, 3
xscvspdpn 0, 0
xxmrghd 0, 0, 3
xxmrghd 1, 2, 1
stxv 0, 0(4)
stxv 1, 0(5)
This patch custom lower it to the following sequence:
lxv 0, 0(3) # load the v4f32 <w0, w1, w2, w3>
xxmrghw 2, 0, 0 # Produce the following vector <w0, w0, w1, w1>
xxmrglw 3, 0, 0 # Produce the following vector <w2, w2, w3, w3>
xvcvspdp 2, 2 # FP-extend to <d0, d1>
xvcvspdp 3, 3 # FP-extend to <d2, d3>
stxv 2, 0(5) # Store <d0, d1> (%vecinit11)
stxv 3, 0(4) # Store <d2, d3> (%vecinit4)
Differential Revision: https://reviews.llvm.org/D61961
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372029 91177308-0d34-0410-b5e6-96231b3b80d8
Speed up queries for coverage info in a file by reducing the amount of
time spent determining whether a function record corresponds to a file.
This gives a 36% speedup when generating a coverage report for `llc`.
The reduction is entirely in user time.
rdar://54758110
Differential Revision: https://reviews.llvm.org/D67575
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372025 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is needed to implemented the same approach as lld (implemented in r338434)
for how to handling symbols that can be generated by LTO code generator
but not present in the symbol table for linker that uses legacy C APIs.
libLTO is in charge of providing the list of symbols. Linker is in
charge of implementing the eager loading from static libraries using
the list of symbols.
rdar://problem/52853974
Reviewers: tejohnson, bd1976llvm, deadalnix, espindola
Reviewed By: tejohnson
Subscribers: emaste, arichardson, hiraditya, MaskRay, dang, kledzik, mehdi_amini, inglorion, jkorous, dexonsmith, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67568
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372021 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes relocations against __profd_ symbols in discarded sections,
which is PR41380.
In general, instrumentation happens very early, and optimization and
inlining happens afterwards. The counters for a function are calculated
early, and after inlining, counters for an inlined function may be
widely referenced by other functions.
For C++ inline functions of all kinds (linkonce_odr &
available_externally mainly), instr profiling wants to deduplicate these
__profc_ and __profd_ globals. Otherwise the binary would be quite
large.
I made __profd_ and __profc_ comdat in r355044, but I chose to make
__profd_ internal. At the time, I was only dealing with coverage, and in
that case, none of the instrumentation needs to reference __profd_.
However, if you use PGO, then instrumentation passes add calls to
__llvm_profile_instrument_range which reference __profd_ globals. The
solution is to make these globals externally visible by using
linkonce_odr linkage for data as was done for counters.
This is safe because PGO adds a CFG hash to the names of the data and
counter globals, so if different TUs have different globals, they will
get different data and counter arrays.
Reviewers: xur, hans
Differential Revision: https://reviews.llvm.org/D67579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372020 91177308-0d34-0410-b5e6-96231b3b80d8
The adds some very basic folding of PREDICATE_CASTS, removing cases when they
are chained together. These would already be removed eventually, as these are
lowered to copies. This just allows it to happen earlier, which can help other
simplifications.
Differential Revision: https://reviews.llvm.org/D67591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, if the threshold was 2, we were willing to speculatively
execute 2 cheap instructions in both basic blocks (thus we were willing
to speculatively execute cost = 4), but weren't willing to speculate
when one BB had 3 instructions and other one had no instructions,
even thought that would have total cost of 3.
This looks inconsistent to me.
I don't think `cmov`-like instructions will start executing
until both of it's inputs are available: https://godbolt.org/z/zgHePf
So i don't see why the existing behavior is the correct one.
Also, let's add it's own `cl::opt` for this threshold,
with default=4, so it is not stricter than the previous threshold:
will allow to fold when there are 2 BB's each with cost=2.
And since the logic has changed, it will also allow to fold when
one BB has cost=3 and other cost=1, or there is only one BB with cost=4.
This is an alternative solution to D65148:
This fix is mainly motivated by `signbit-like-value-extension.ll` test.
That pattern comes up in JPEG decoding, see e.g.
`Figure F.12 – Extending the sign bit of a decoded value in V`
of `ITU T.81` (JPEG specification).
That branch is not predictable, and it is within the innermost loop,
so the fact that that pattern ends up being stuck with a branch
instead of `select` (i.e. `CMOV` for x86) is unlikely to be beneficial.
This has great results on the final assembly (vanilla test-suite + RawSpeed): (metric pass - D67240)
| metric | old | new | delta | % |
| x86-mi-counting.NumMachineFunctions | 37720 | 37721 | 1 | 0.00% |
| x86-mi-counting.NumMachineBasicBlocks | 773545 | 771181 | -2364 | -0.31% |
| x86-mi-counting.NumMachineInstructions | 7488843 | 7486442 | -2401 | -0.03% |
| x86-mi-counting.NumUncondBR | 135770 | 135543 | -227 | -0.17% |
| x86-mi-counting.NumCondBR | 423753 | 422187 | -1566 | -0.37% |
| x86-mi-counting.NumCMOV | 24815 | 25731 | 916 | 3.69% |
| x86-mi-counting.NumVecBlend | 17 | 17 | 0 | 0.00% |
We significantly decrease basic block count, notably decrease instruction count,
significantly decrease branch count and very significantly increase `cmov` count.
Performance-wise, unsurprisingly, this has great effect on
target RawSpeed benchmark. I'm seeing 5 **major** improvements:
```
Benchmark Time CPU Time Old Time New CPU Old CPU New
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_mean -0.3064 -0.3064 226.9913 157.4452 226.9800 157.4384
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_median -0.3057 -0.3057 226.8407 157.4926 226.8282 157.4828
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_stddev -0.4985 -0.4954 0.3051 0.1530 0.3040 0.1534
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_mean -0.1747 -0.1747 80.4787 66.4227 80.4771 66.4146
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_median -0.1742 -0.1743 80.4686 66.4542 80.4690 66.4436
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_stddev +0.6089 +0.5797 0.0670 0.1078 0.0673 0.1062
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_mean -0.1598 -0.1598 171.6996 144.2575 171.6915 144.2538
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_median -0.1598 -0.1597 171.7109 144.2755 171.7018 144.2766
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_stddev +0.4024 +0.3850 0.0847 0.1187 0.0848 0.1175
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_mean -0.0550 -0.0551 280.3046 264.8800 280.3017 264.8559
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_median -0.0554 -0.0554 280.2628 264.7360 280.2574 264.7297
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_stddev +0.7005 +0.7041 0.2779 0.4725 0.2775 0.4729
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_mean -0.0354 -0.0355 316.7396 305.5208 316.7342 305.4890
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_median -0.0354 -0.0356 316.6969 305.4798 316.6917 305.4324
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_stddev +0.0493 +0.0330 0.3562 0.3737 0.3563 0.3681
```
That being said, it's always best-effort, so there will likely
be cases where this worsens things.
Reviewers: efriedma, craig.topper, dmgreen, jmolloy, fhahn, Carrot, hfinkel, chandlerc
Reviewed By: jmolloy
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67318
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372009 91177308-0d34-0410-b5e6-96231b3b80d8
Related folds were added in:
rL125734
...the code comment about register pressure is discussed in
more detail in:
https://bugs.llvm.org/show_bug.cgi?id=2698
But 10 years later, perf testing bzip2 with this change now
shows a slight (0.2% average) improvement on Haswell although
that's probably within test noise.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
rL371940 and rL371981 are related patches in this series.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372007 91177308-0d34-0410-b5e6-96231b3b80d8
BITREVERSE can use the VBRSR which will reverse and right shift.
Shifting right by 0 will just reverse the bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372001 91177308-0d34-0410-b5e6-96231b3b80d8
Lower CTTZ on MVE using VBRSR and VCLS which will reverse the bits and
count the leading zeros, equivalent to a count trailing zeros (CTTZ).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372000 91177308-0d34-0410-b5e6-96231b3b80d8
