This was checking for a variety of situations that should
never happen. This saves a tiny bit of compile time.
We should not be selecting instructions with invalid operands in the
first place. Most of the time for registers copys are inserted
to the correct operand register class.
For VOP3, since all operand types are supported and literal
constants never are, we just need to verify the constant bus
requirements (all immediates should be legal inline ones).
The only possibly tricky case to maybe worry about is if when
legalizing operands in moveToVALU with s_add_i32 and similar
instructions. If the original s_add_i32 had a literal constant
and we need to replace it with v_add_i32_e64 we would have an
unsupported literal operand. However, I don't think we should worry
about that because SIFoldOperands should handle folding literal
constant operands into the SALU instructions based on the uses.
At SIFoldOperands time, the legality and profitability of
operand types is a bit different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250951 91177308-0d34-0410-b5e6-96231b3b80d8
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249494 91177308-0d34-0410-b5e6-96231b3b80d8
to prevent setting a huge stride, because DATA_FORMAT has a different
meaning if ADD_TID_ENABLE is set.
This is a candidate for stable llvm 3.7.
Tested-and-Reviewed-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248858 91177308-0d34-0410-b5e6-96231b3b80d8
When used recursively, this would set the kill flag
on the intermediate step from first splitting
x16 to x8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248741 91177308-0d34-0410-b5e6-96231b3b80d8
The splitting of > 4 dword SMRD instructions
if using an offset in an SGPR instead of an immediate
was not setting the destination register,
resulting an an instruction missing an operand
which would assert later.
Test will be included in a following commit
which fixes a related issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248739 91177308-0d34-0410-b5e6-96231b3b80d8
It's easier to understand creating a full instruction
than the current situation where sometimes a new
instruction is created and sometimes it is awkwardly
mutated in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248627 91177308-0d34-0410-b5e6-96231b3b80d8
When buffer resource descriptors were built, the upper two components
of the descriptor were first composed into a 64-bit register because
legalizeOperands assumed all operands had the same register class.
Fix that problem, but keep the workaround. I'm not sure anything
actually is actually emitting such a REG_SEQUENCE now.
If multiple resource descriptors are set up with different base
pointers, this is copied with a single s_mov_b64. We probably
should fix this better by recognizing a pair of s_mov_b32 later,
but for now delete the dead code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248585 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of always inserting a copy in case
the super register is itself a subregister,
only extract to the super reg class if this is
actually the case.
This shouldn't really change codegen, but
makes looking at the output of SIFixSGPRCopies
easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248467 91177308-0d34-0410-b5e6-96231b3b80d8
If the instruction doesn't have enough operands, it
either shouldn't be marked as isCommutable or is malformed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248242 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of extracting both 32-bit components from the 128-bit
register. This produces fewer copies and is easier for
the copy peephole optimizer to understand and see the actual uses
as extracts from a reg_sequence.
This avoids needing to handle subregister composing in the
PeepholeOptimizer's ValueTracker for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247162 91177308-0d34-0410-b5e6-96231b3b80d8
These are already added during the MachineInstr construction,
so this was adding the implicit registers twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246525 91177308-0d34-0410-b5e6-96231b3b80d8
Without a memory operand, mayLoad or mayStore instructions
are treated as hasUnorderedMemRef, which results in much worse
scheduling.
We really should have a verifier check that any
non-side effecting mayLoad or mayStore has a memory operand.
There are a few instructions (interp and images) which I'm
not sure what / where to add these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246356 91177308-0d34-0410-b5e6-96231b3b80d8
There is no context where s_mov_b64 is emitted
and could potentially be moved to the VALU.
It is currently only emitted for materializing
immediates, which can't be dependent on vector sources.
The immediate splitting is already done when selecting
constants. I'm not sure what contexts if any the register
splitting would have been used before.
Also clean up using s_mov_b64 in place of v_mov_b64_pseudo,
although this isn't required and just skips the extra step
of eliminating the copy from the SReg_64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246080 91177308-0d34-0410-b5e6-96231b3b80d8
When splitting 64-bit operations, create the correct
VALU instructions immediately.
This was splitting things like s_or_b64 into the two
s_or_b32s and then pushing the new instructions
onto the worklist. There's no reason we need
to do this intermediate step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246077 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes a bug in the class 'SIInstrInfo' where the implicit register
machine operands were added to a machine instruction in an incorrect order -
the implicit uses were added before the implicit defs.
I found this bug while working on moving the implicit register operand
verification code from the MIR parser to the machine verifier.
This commit also makes the method 'addImplicitDefUseOperands' in the machine
instruction class public so that it can be reused in the 'SIInstrInfo' class.
Reviewers: Matt Arsenault
Differential Revision: http://reviews.llvm.org/D11689
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243799 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace the switch on instruction opcode with a switch on register size.
This way we don't need to update the switch statement when we add new
SMRD variants.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243652 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This function is never called. isReallyTriviallyReMaterializable() is
the function that should be implemented instead.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11620
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243651 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
If pseudoToMCOpcode failed, we would return the original opcode, so operands
would be swapped, but the instruction would remain the same.
It resulted in LSHLREV a, b ---> LSHLREV b, a.
This fixes Glamor text rendering and
piglit/arb_sample_shading-builtin-gl-sample-mask on VI.
This is a candidate for stable branches.
v2: the test was simplified by Tom Stellard
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240824 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239741 91177308-0d34-0410-b5e6-96231b3b80d8
