Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292117 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288458 91177308-0d34-0410-b5e6-96231b3b80d8
MipsFastISel uses a a class to represent addresses with a signed member
to represent the offset. MipsFastISel::emitStore, emitLoad and computeAddress
all treated the offset as being positive. In cases where the offset was
actually negative and a frame pointer was used, this would cause the constant
synthesis routine to crash as it would generate an unexpected instruction
sequence when frame indexes are replaced.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D26192
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instead of instantiating the MipsFastISel class and checking if the
target is supported in the overriden methods, we should perform that
check before creating the class. This allows us to enable FastISel *only*
for targets that truly support it, ie. MIPS32 to MIPS32R5.
Reviewers: sdardis
Subscribers: ehostunreach, llvm-commits
Differential Revision: https://reviews.llvm.org/D24824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284475 91177308-0d34-0410-b5e6-96231b3b80d8
Treat soft-float as unsupported for fast-isel. Additionally, ensure we check
that lowering f32 arguments also considers the case of soft-float mode.
Reviewers: ehostunreach, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D24505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283209 91177308-0d34-0410-b5e6-96231b3b80d8
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281022 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM PR/29052 highlighted that FastISel for MIPS attempted to lower
arguments assuming that it was using the paired 32bit registers to
perform operations for f64. This mode of operation is not supported
for MIPSR6.
This patch resolves the reported issue by adding additional checks
for unsupported floating point unit configuration.
Thanks to mike.k for reporting this issue!
Reviewers: seanbruno, vkalintiris
Differential Review: https://reviews.llvm.org/D23795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280706 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Allocating an AFGR64 shadows two GPR32's instead of just one.
This fixes an LNT regression detected by our internal buildbots.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D23012
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277348 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implements fastLowerArguments() to avoid the need to fall back on
SelectionDAG for 0-4 argument functions that don't do tricky things like
passing double in a pair of i32's.
This allows us to move all except one test to -fast-isel-abort=3. The
remaining one has function prototypes of the form 'i32 (i32, double, double)'
which requires floats to be passed in GPR's.
The previous commit had an uninitialized variable that caused the incoming
argument region to have undefined size. This has been fixed.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D22680
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implements fastLowerArguments() to avoid the need to fall back on
SelectionDAG for 0-4 argument functions that don't do tricky things like
passing double in a pair of i32's.
This allows us to move all except one test to -fast-isel-abort=3. The
remaining one has function prototypes of the form 'i32 (i32, double, double)'
which requires floats to be passed in GPR's.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D22680
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276982 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It's always zero for SelectionDAG and is never read by the MIPS backend so
do the same for FastISel.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19863
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268386 91177308-0d34-0410-b5e6-96231b3b80d8
Author: milena.vujosevic.janicic
Reviewers: dsanders
FastIsel is not supported for microMIPS, thus it needs to be disabled.
Test micromips-zero-mat-uses.ll is deleted since the tested sequence of instructions is not generated for microMIPS without FastISel.
Differential Revision: http://reviews.llvm.org/D15892
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259039 91177308-0d34-0410-b5e6-96231b3b80d8
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253511 91177308-0d34-0410-b5e6-96231b3b80d8
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244693 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, we would check whether the target is supported or not, only in
fastSelectInstruction(). This means that 64-bit targets could use FastISel too.
We fix this by checking every overridden method of the FastISel class and
by falling back to SelectionDAG if the target isn't supported. This change
should have been committed along with r243638, but somehow I missed it.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243986 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, we would sign-extend non-boolean negative constants and
zero-extend otherwise. This was problematic for PHI instructions with
negative values that had a type with bitwidth less than that of the
register used for materialization.
More specifically, ComputePHILiveOutRegInfo() assumes the constants
present in a PHI node are zero extended in their container and
afterwards deduces the known bits.
For example, previously we would materialize an i16 -4 with the
following instruction:
addiu $r, $zero, -4
The register would end-up with the 32-bit 2's complement representation
of -4. However, ComputePHILiveOutRegInfo() would generate a constant
with the upper 16-bits set to zero. The SelectionDAG builder would use
that information to generate an AssertZero node that would remove any
subsequent trunc & zero_extend nodes.
In theory, we should modify ComputePHILiveOutRegInfo() to consult
target-specific hooks about the way they prefer to materialize the
given constants. However, git-blame reports that this specific code
has not been touched since 2011 and it seems to be working well for every
target so far.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11592
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently, we support only the MIPS O32 ABI calling convention for call
lowering. With this change we avoid using the O32 calling convetion for
lowering calls marked as using the fast calling convention.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243485 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Generate correct code for the select instruction by zero-extending
it's boolean/condition operand to GPR-width. This is necessary because
the conditional-move instructions operate on the whole register.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243469 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241775 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241773 91177308-0d34-0410-b5e6-96231b3b80d8
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240395 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement bswap intrinsic for MIPS FastISel. It's very different for misp32 r1/r2 .
Based on a patch by Reed Kotler.
Test Plan:
bswap1.ll
test-suite
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7219
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238760 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement the intrinsics memset, memcopy and memmove in MIPS FastISel.
Make some needed infrastructure fixes so that this can work.
Based on a patch by Reed Kotler.
Test Plan:
memtest1.ll
The patch passes test-suite for mips32 r1/r2 and at O0/O2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7158
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238759 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement the LLVM assembly urem/srem and sdiv/udiv instructions in MIPS FastISel.
Based on a patch by Reed Kotler.
Test Plan:
srem1.ll
div1.ll
test-suite at O0/O2 for mips32 r1/r2
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238757 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement the LLVM IR select statement for MIPS FastISelsel.
Based on a patch by Reed Kotler.
Test Plan:
"Make check" test included now.
Passes test-suite at O2/O0 mips32 r1/r2.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D6774
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238756 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The contents of the HI/LO registers are unpredictable after the execution of
the MUL instruction. In addition to implicitly defining these registers in the
MUL instruction definition, we have to mark those registers as dead too.
Without this the fast register allocator is running out of registers when the
MUL instruction is followed by another one that tries to allocate the AC0
register.
Based on a patch by Reed Kotler.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D9825
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238755 91177308-0d34-0410-b5e6-96231b3b80d8
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237958 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Allow calls with non legal integer types based on i8 and i16 to be processed by mips fast-isel.
Based on a patch by Reed Kotler.
Test Plan:
"Make check" test forthcoming.
Test-suite passes at O0/O2 and with mips32 r1/r2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D6770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237121 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Try to compute addresses when the offset from a memory location is a constant
expression.
Based on a patch by Reed Kotler.
Test Plan:
Passes test-suite for -O0/O2 and mips 32 r1/r2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D6767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237117 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r235194, which was reverted in r235495 because it was causing a
failure in our out-of-tree buildbots for MIPS. With the sign-extension patch
in r235718, this patch doesn't cause any problem any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235878 91177308-0d34-0410-b5e6-96231b3b80d8
