This patch reverts change to X86TargetLowering::getScalarShiftAmountTy in
rL318727 and move the logic to DAGTypeLegalizer::SplitInteger.
The reason is that getScalarShiftAmountTy returns a shift amount type that
is suitable for common use cases in CodeGen. DAGTypeLegalizer::SplitInteger
is a rare situation which requires a shift amount type larger than what
getScalarShiftAmountTy. In this case, it is more reasonable to do special
handling of shift amount type in DAGTypeLegalizer::SplitInteger only. If
similar situations arises the logic may be moved to a separate function.
Differential Revision: https://reviews.llvm.org/D40320
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318890 91177308-0d34-0410-b5e6-96231b3b80d8
Since i1 is a legal type, this:
NumBytes = Op1->getMemoryVT().getSizeInBits() >> 3;
is wrong and should be instead
NumBytes = Op0->getMemoryVT().getStoreSize();
There seems to be more places where this should be fixed outside DAGCombiner.
Review: Hal Finkel
https://bugs.llvm.org/show_bug.cgi?id=35366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318824 91177308-0d34-0410-b5e6-96231b3b80d8
DAGTypeLegalizer::SplitInteger uses default pointer size as shift amount constant type,
which causes less performant ISA in amdgcn---amdgiz target since the default pointer
type is i64 whereas the desired shift amount type is i32.
This patch fixes that by using TLI.getScalarShiftAmountTy in DAGTypeLegalizer::SplitInteger.
The X86 change is necessary since splitting i512 requires shifting amount of 256, which
cannot be held by i8.
Differential Revision: https://reviews.llvm.org/D40148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318727 91177308-0d34-0410-b5e6-96231b3b80d8
Normally this would be cleaned up by promoting the condition operand next. But in the attached case we promoted the result from v2i48 to v2i64 and the condition from v2i1 to v2i48. Then we tried to "promote" the v2i48 condition back to v2i1 because that's what the SetCC result type for v2i64 is on X86 with VLX. But promote is either a NOP or SIGN_EXTEND and this would need a truncation.
With the change here we now get the SetCC type of v2i1 when we're handling the result promotion and the operand no longer needs to be promoted itself.
Fixes PR35272.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318706 91177308-0d34-0410-b5e6-96231b3b80d8
This broke the bots. Reverting this until I can fix the failures.
This reverts commit 5a3db2856d12a3c4b400f487d39f8f05989e79f0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318686 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 30419e150cd940893a13b345e85f96053850208f.
aka r318679. It caused "sanitizer-windows" bot to fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318684 91177308-0d34-0410-b5e6-96231b3b80d8
MachineSink attempts to place instructions near the basic blocks where
they are needed. Once an instruction has been sunk, its location
relative to other instructions is no longer consistent with the
original source code. In order to ensure correct single-stepping and
profiling, the debug location for sunk instructions is either merged
with the insertion point or erased if the target successor block is
empty.
Patch by Matthew Voss!
Differential Revision: https://reviews.llvm.org/D39933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318679 91177308-0d34-0410-b5e6-96231b3b80d8
The instructions addis,addi, bl are used to calculate the address of TLS thread
local variables. These TLS access code sequences are generated repeatedly every
time the thread local variable is accessed. By communicating to Machine CSE that
X2 is guaranteed to have the same value within the same function call (so called
Caller Preserved Physical Register), the redundant TLS access code sequences are
cleaned up.
Differential Revision: https://reviews.llvm.org/D39173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318661 91177308-0d34-0410-b5e6-96231b3b80d8
We must collect all AddModes even if they are the same.
This is due to Original value is different but we need all original
values collected as they are used as anchors in common phi finding.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40166
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318638 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of asserting that the type sizes are exactly equal, we check
that the new size is big enough to contain the original type.
We have to relax this constrain because, right now, we sometimes
specify that things that are smaller than a storage type are legal
instead of widening everything to the size of a storage type.
E.g., we say that G_AND s16 is legal and we map that on GPR32.
This is something we may revisit in the future (either by changing
the legalization process or keeping track separately of the storage
size and the size of the type), but let us reflect the reality of
the situation for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318587 91177308-0d34-0410-b5e6-96231b3b80d8
If a vreg's bank is specified in the registers block and one of its
defs or uses also specifies the bank, we end up checking that the
RegBank is equal to diagnose conflicting banks. The problem comes up
for generic vregs, where we weren't fully initializing the VRegInfo
when parsing the registers block, so we'd end up comparing a null
pointer to uninitialized memory.
This fixes a non-deterministic failure when round tripping through MIR
with generic vregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318543 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we were assuming all results were vectors and calling SetWidenedVector, but if its a chain result we should just replace uses instead.
This fixes an error found by expensive checks after r318368.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318509 91177308-0d34-0410-b5e6-96231b3b80d8
TransferDbgValues (capital 'T') is wired into ReplaceAllUsesWith, and
transferDbgValues (lowercase 't') is used elsewhere (e.g in Legalize).
Both functions should be doing the exact same thing. This patch
consolidates the logic into one place.
This was reverted in r318455 because some newly introduced asserts,
which I thought were NFC, were firing. I filed PR35338. For now I've
weakened the asserts.
Testing: check-llvm, check-clang, and a stage2 Rel+Deb build of clang
Differential Revision: https://reviews.llvm.org/D40104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318498 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
The sign extend might be from an i16 or i8 type and was inserted by InstCombine to match the pointer width. X86 gather legalization isn't currently detecting this to reinsert a sign extend to make things legal.
It's a bit weird for the SelectionDAGBuilder to do this kind of optimization in the first place. With this removed we can at least lean on InstCombine somewhat to ensure the index is i32 or i64.
I'll work on trying to recover some of the test cases by removing sign extends in the backend when its safe to do so with an understanding of the current legalizer capabilities.
This should fix PR30690.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318466 91177308-0d34-0410-b5e6-96231b3b80d8
TransferDbgValues (capital 'T') is wired into ReplaceAllUsesWith, and
transferDbgValues (lowercase 't') is used elsewhere (e.g in Legalize).
Both functions should be doing the exact same thing. This patch
consolidates the logic into one place.
Differential Revision: https://reviews.llvm.org/D40104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318448 91177308-0d34-0410-b5e6-96231b3b80d8
Change the calculation for the desired ValueType for non-sign
extending loads, as in those cases we don't care about the
higher bits. This creates a smaller ExtVT and allows for such
combinations as:
(srl (zextload i16, [addr]), 8) -> (zextload i8, [addr + 1])
Differential Revision: https://reviews.llvm.org/D40034
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318390 91177308-0d34-0410-b5e6-96231b3b80d8
The LatencyPriorityQueue doesn't currently check whether the SU being removed really exists in the Queue.
This method fails quietly when SU is not found and removes the last element from the Queue, leading to unexpected behavior.
Unfortunately, this only occurs on our custom target, with the custom scheduler. In our case, when remove() is invoked, it removes the wrong SU at the end of the Queue, which is only discovered later when VerifyScheduledDAG() is invoked and finds that some nodes were not scheduled at all.
As this is only reproducible with a lot of proprietary code, I'm hopeful this assert is straightforward enough to not necessitate a test.
Patch by Ondrej Glasnak!
Differential Revision: https://reviews.llvm.org/D40084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318387 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Use use_nodbg_empty() rather than use_empty() in
MachineRegisterInfo::EmitLiveInCopies() when determining if a livein
register has any uses or not. Otherwise a single dbg.value can make us
generate different code, meaning -g would affect code generation.
Found when compiling code for my out-of-tree target. Unfortunately I
haven't been able to reproduce the problem on X86 or any of the other
in-tree targets that I tried, so no test case.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318382 91177308-0d34-0410-b5e6-96231b3b80d8
For example, this is currently reachable by X86 if you use a masked store intrinsic with a v1iX type.
Using a fatal error seems like a better user experience if someone were to encounter this on a release build. There are several other similar places that have been converted from unreachable to fatal error previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318379 91177308-0d34-0410-b5e6-96231b3b80d8
processDbgDeclares assumes pointer size is the same for different addr spaces.
It uses pointer size for addr space 0 for all pointers, which causes assertion
in stripAndAccumulateInBoundsConstantOffsets for amdgcn---amdgiz since
pointer in addr space 5 has different size than in addr space 0.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D40085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318370 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318356 91177308-0d34-0410-b5e6-96231b3b80d8
Due to integer precision, we might have numerator greater than denominator in
the branch probability scaling. Add a check to prevent this from happening.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318353 91177308-0d34-0410-b5e6-96231b3b80d8
In constructAbstractSubprogramScopeDIE there can be a potential mismatch
between `this` and the CU of ContextDIE when a scope is shared between
two DISubprograms belonging to a different CU. In that case, `this` is
the CU that was specified in the IR, but the CU of ContextDIE is that of
the first subprogram that was emitted. This patch fixes the mismatch by
looking up the CU of ContextDIE, and switching to use that.
This fixes PR35212 (https://bugs.llvm.org/show_bug.cgi?id=35212)
Patch by Philip Craig!
Differential revision: https://reviews.llvm.org/D39981
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318289 91177308-0d34-0410-b5e6-96231b3b80d8
artifacts along with DCE
Legalization Artifacts are all those insts that are there to make the
type system happy. Currently, the target needs to say all combinations
of extends and truncs are legal and there's no way of verifying that
post legalization, we only have *truly* legal instructions. This patch
changes roughly the legalization algorithm to process all illegal insts
at one go, and then process all truncs/extends that were added to
satisfy the type constraints separately trying to combine trivial cases
until they converge. This has the added benefit that, the target
legalizerinfo can only say which truncs and extends are okay and the
artifact combiner would combine away other exts and truncs.
Updated legalization algorithm to roughly the following pseudo code.
WorkList Insts, Artifacts;
collect_all_insts_and_artifacts(Insts, Artifacts);
do {
for (Inst in Insts)
legalizeInstrStep(Inst, Insts, Artifacts);
for (Artifact in Artifacts)
tryCombineArtifact(Artifact, Insts, Artifacts);
} while(!Insts.empty());
Also, wrote a simple wrapper equivalent to SetVector, except for
erasing, it avoids moving all elements over by one and instead just
nulls them out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318210 91177308-0d34-0410-b5e6-96231b3b80d8
This patch peels off the top case in switch statement into a branch if the
probability exceeds a threshold. This will help the branch prediction and
avoids the extra compares when lowering into chain of branches.
Differential Revision: http://reviews.llvm.org/D39262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318202 91177308-0d34-0410-b5e6-96231b3b80d8
Clang implements the -finstrument-functions flag inherited from GCC, which
inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit.
This is useful for getting a trace of how the functions in a program are
executed. Normally, the calls remain even if a function is inlined into another
function, but it is useful to be able to turn this off for users who are
interested in a lower-level trace, i.e. one that reflects what functions are
called post-inlining. (We use this to generate link order files for Chromium.)
LLVM already has a pass for inserting similar instrumentation calls to
mcount(), which it does after inlining. This patch renames and extends that
pass to handle calls both to mcount and the cygprofile functions, before and/or
after inlining as controlled by function attributes.
Differential Revision: https://reviews.llvm.org/D39287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318195 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Bypass of slow divs based on operand values is currently disabled for
-Os. Do the same when profile summary is available and the working set
size of the application is huge. This is similar to how loop peeling is
guarded by hasHugeWorkingSetSize. In the div bypass case, the generated
extra code (and the extra branch) tendss to outweigh the benefits of the
bypass. This results in noticeable performance improvement on an
internal application.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318179 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLowering::LowerCallTo assumes that sret value type corresponds to a
pointer in default address space, which is incorrect, since sret value type
should correspond to a pointer in alloca address space, which may not
be the default address space. This causes assertion for amdgcn target
in amdgiz environment.
This patch fixes that.
Differential Revision: https://reviews.llvm.org/D39996
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318167 91177308-0d34-0410-b5e6-96231b3b80d8
For now at least. We clearly need some kind of comdat or
linkonce_odr support for wasm but currently COMDAT is not
supported.
Disable COMDAT support in the same way we do the Mach-O. This
also causes clang not to generated COMDATs.
Differential Revision: https://reviews.llvm.org/D39873
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318123 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare sinks address computations from one basic block to another
and attempts to reuse address computations that have already been sunk. If
the same address computation appears twice with the first instance as an
operand of a load whose result is an operand to a simplifable select,
CodeGenPrepare simplifies the select and recursively erases the now dead
instructions. CodeGenPrepare then attempts to use the erased address
computation for the second load.
Fix this by erasing the cached address value if it has zero uses before
looking for the address value in the sunken address map.
This partially resolves PR35209.
Thanks to Alexander Richardson for reporting the issue!
Reviewers: john.brawn
Differential Revision: https://reviews.llvm.org/D39841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318032 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a pattern rewriter to be installed in CodeGenDAGPatterns and use it to
correct situations where SelectionDAG and GlobalISel disagree on
representation. For example, it would rewrite:
(sextload:i32 $ptr)<<unindexedload>><<sextload>><<sextloadi16>
to:
(sext:i32 (load:i16 $ptr)<<unindexedload>>)
I'd have preferred to replace the fragments and have the expansion happen
naturally as part of PatFrag expansion but the type inferencing system can't
cope with loads of types narrower than those mentioned in register classes.
This is because the SDTCisInt's on the sext constrain both the result and
operand to the 'legal' integer types (where legal is defined as 'a register
class can contain the type') which immediately rules the narrower types out.
Several targets (those with only one legal integer type) would then go on to
crash on the SDTCisOpSmallerThanOp<> when it removes all the possible types
for the result of the extend.
Also, improve isObviouslySafeToFold() slightly to automatically return true for
neighbouring instructions. There can't be any re-ordering problems if
re-ordering isn't happenning. We'll need to improve it further to handle
sign/zero-extending loads when the extend and load aren't immediate neighbours
though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317971 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for a bug in r317947. We were supposed to check that all the indices are are constant 0, but instead we're only make sure that indices that are constant are 0. Non-constant indices are being ignored.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317950 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we can only get a uniform base from a simple GEP with 2 operands. This causes us to miss address folding opportunities for simple global array accesses as the test case shows.
This patch adds support for larger GEPs if the other indices are 0 since those don't require any additional computations to be inserted.
We may also want to handle constant splats of zero here, but I'm leaving that for future work when I have a real world example.
Differential Revision: https://reviews.llvm.org/D39911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317947 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The associated debug value is updated when the virtual source register
of a copy is completely eliminated and replaced with a rematerialize
value in the defed register of the copy. As the debug value now is
associated with another register it also need to be moved, otherwise
the debug value isn't valid.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: MatzeB, llvm-commits, qcolombet
Differential Revision: https://reviews.llvm.org/D38024
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317880 91177308-0d34-0410-b5e6-96231b3b80d8
Yaxun Liu