Fast selection of llvm icmp and fcmp instructions is not handled well about VSX instruction support.
We'd use VSX float comparison instruction instead of non-vsx float comparison instruction
if the operand register class is VSSRC or VSFRC because i32 and i64 are mapped to VSSRC and
VSFRC correspondingly if VSX feature is opened.
If the target does not have corresponding VSX instruction comparison for some type,
just copy VSX-related register to common float register class and use non-vsx comparison instruction.
Differential Revision: https://reviews.llvm.org/D57078
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352174 91177308-0d34-0410-b5e6-96231b3b80d8
Follow the same custom legalisation strategy as used in D57085 for
variable-length shifts (see that patch summary for more discussion). Although
we may lose out on some late-stage DAG combines, I think this custom
legalisation strategy is ultimately easier to reason about.
There are some codegen changes in rv64m-exhaustive-w-insts.ll but they are all
neutral in terms of the number of instructions.
Differential Revision: https://reviews.llvm.org/D57096
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352171 91177308-0d34-0410-b5e6-96231b3b80d8
The previous DAG combiner-based approach had an issue with infinite loops
between the target-dependent and target-independent combiner logic (see
PR40333). Although this was worked around in rL351806, the combiner-based
approach is still potentially brittle and can fail to select the 32-bit shift
variant when profitable to do so, as demonstrated in the pr40333.ll test case.
This patch instead introduces target-specific SelectionDAG nodes for
SHLW/SRLW/SRAW and custom-lowers variable i32 shifts to them. pr40333.ll is a
good example of how this approach can improve codegen.
This adds DAG combine that does SimplifyDemandedBits on the operands (only
lower 32-bits of first operand and lower 5 bits of second operand are read).
This seems better than implementing SimplifyDemandedBitsForTargetNode as there
is no guarantee that would be called (and it's not for e.g. the anyext return
test cases). Also implements ComputeNumSignBitsForTargetNode.
There are codegen changes in atomic-rmw.ll and atomic-cmpxchg.ll but the new
instruction sequences are semantically equivalent.
Differential Revision: https://reviews.llvm.org/D57085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352169 91177308-0d34-0410-b5e6-96231b3b80d8
This patch exploits the instructions that store a single element from a vector
to preform a (store (extract_elt)). We already have code that does this with
ISA 3.0 instructions that were added to handle i8/i16 types. However, we had
never exploited the existing ones that handle f32/f64/i32/i64 types.
Differential revision: https://reviews.llvm.org/D56175
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352131 91177308-0d34-0410-b5e6-96231b3b80d8
https://reviews.llvm.org/D57178
Now add a hook in TargetPassConfig to query if CSE needs to be
enabled. By default this hook returns false only for O0 opt level but
this can be overridden by the target.
As a consequence of the default of enabled for non O0, a few tests
needed to be updated to not use CSE (by passing in -O0) to the run
line.
reviewed by: arsenm
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352126 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for vector @llvm.ceil intrinsics when full 16 bit
floating point support isn't available.
To do this, this patch...
- Implements basic isel for G_UNMERGE_VALUES
- Teaches the legalizer about 16 bit floats
- Teaches AArch64RegisterBankInfo to respect floating point registers on
G_BUILD_VECTOR and G_UNMERGE_VALUES
- Teaches selectCopy about 16-bit floating point vectors
It also adds
- A legalizer test for the 16-bit vector ceil which verifies that we create a
G_UNMERGE_VALUES and G_BUILD_VECTOR when full fp16 isn't supported
- An instruction selection test which makes sure we lower to G_FCEIL when
full fp16 is supported
- A test for selecting G_UNMERGE_VALUES
And also updates arm64-vfloatintrinsics.ll to show that the new ceiling types
work as expected.
https://reviews.llvm.org/D56682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352113 91177308-0d34-0410-b5e6-96231b3b80d8
It should be emitted when any floating-point operations (including
calls) are present in the object, not just when calls to printf/scanf
with floating point args are made.
The difference caused by this is very subtle: in static (/MT) builds,
on x86-32, in a program that uses floating point but doesn't print it,
the default x87 rounding mode may not be set properly upon
initialization.
This commit also removes the walk of the types pointed to by pointer
arguments in calls. (To assist in opaque pointer types migration --
eventually the pointee type won't be available.)
That latter implies that it will no longer consider a call like
`scanf("%f", &floatvar)` as sufficient to emit _fltused on its
own. And without _fltused, `scanf("%f")` will abort with error R6002. This
new behavior is unlikely to bite anyone in practice (you'd have to
read a float, and do nothing with it!), and also, is consistent with
MSVC.
Differential Revision: https://reviews.llvm.org/D56548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352076 91177308-0d34-0410-b5e6-96231b3b80d8
Use CombinerHelper to combine extending load instructions.
G_LOAD combined with G_ZEXT, G_SEXT or G_ANYEXT gives G_ZEXTLOAD,
G_SEXTLOAD or G_LOAD with same type as def of extending instruction
respectively.
Similarly G_ZEXTLOAD combined with G_ZEXT gives G_ZEXTLOAD and
G_SEXTLOAD combined with G_SEXT gives G_SEXTLOAD with same type
as def of extending instruction.
Differential Revision: https://reviews.llvm.org/D56914
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352037 91177308-0d34-0410-b5e6-96231b3b80d8
After creating new PHI instructions during isel pseudo expansion, the NoPHIs
property of MF should be reset in case it was previously set.
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352030 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351965 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With XNACK, an smem load whose result is coalesced with an operand (thus
it overwrites its own operand) cannot appear in a clause, because some
other instruction might XNACK and restart the whole clause.
The clause breaker already realized that an smem that overwrites an
operand cannot appear in a clause, and broke the clause. The problem
that this commit fixes is that the SIFormMemoryClauses optimization
formed a bundle with early clobber, which caused the earlier code that
set up the coalesced operand to be removed as dead.
Differential Revision: https://reviews.llvm.org/D57008
Change-Id: I703c4d5b0bf7d6060222bec491f45c18bb3c0016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351950 91177308-0d34-0410-b5e6-96231b3b80d8
Currently in Arm code, we allocate LR first, under the assumption that
it needs to be saved anyway. Unfortunately this has the disadvantage
that it will require any instructions using it to be the longer thumb2
instructions, not the shorter thumb1 ones.
This switches the order when we are optimising for minsize, returning to
the default order so that more lower registers can be used. It can end
up requiring more pushed registers, but on average produces smaller code.
Differential Revision: https://reviews.llvm.org/D56008
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351938 91177308-0d34-0410-b5e6-96231b3b80d8
In the last stage of type promotion, we replace any zext that uses a
new trunc with the operand of the trunc. This is okay when we only
allowed one type to be optimised, but now its the case that the trunc
maybe needed to produce a more narrow type than the one we were
optimising for. So we need to check this before doing the replacement.
Differential Revision: https://reviews.llvm.org/D57041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351935 91177308-0d34-0410-b5e6-96231b3b80d8
The current check in CombineToPreIndexedLoadStore is too
conversative, preventing a pre-indexed store when the base pointer
is a predecessor of the value being stored. Instead, we should check
the pointer operand of the store.
Differential Revision: https://reviews.llvm.org/D56719
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351933 91177308-0d34-0410-b5e6-96231b3b80d8
As part of speculation hardening, the stack pointer gets masked with the
taint register (X16) before a function call or before a function return.
Since there are no instructions that can directly mask writing to the
stack pointer, the stack pointer must first be transferred to another
register, where it can be masked, before that value is transferred back
to the stack pointer.
Before, that temporary register was always picked to be x17, since the
ABI allows clobbering x17 on any function call, resulting in the
following instruction pattern being inserted before function calls and
returns/tail calls:
mov x17, sp
and x17, x17, x16
mov sp, x17
However, x17 can be live in those locations, for example when the call
is an indirect call, using x17 as the target address (blr x17).
To fix this, this patch looks for an available register just before the
call or terminator instruction and uses that.
In the rare case when no register turns out to be available (this
situation is only encountered twice across the whole test-suite), just
insert a full speculation barrier at the start of the basic block where
this occurs.
Differential Revision: https://reviews.llvm.org/D56717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351930 91177308-0d34-0410-b5e6-96231b3b80d8
Two backend optimizations failed to handle cases when compiled with -g, due
to failing to consider DBG_VALUE instructions. This was in
SystemZTargetLowering::emitSelect() and
SystemZElimCompare::getRegReferences().
This patch makes sure that DBG_VALUEs are recognized so that they do not
affect these optimizations.
Tests for branch-on-count, load-and-trap and consecutive selects.
Review: Ulrich Weigand
https://reviews.llvm.org/D57048
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351928 91177308-0d34-0410-b5e6-96231b3b80d8
#pragma clang loop pipeline(disable)
Disable SWP optimization for the next loop.
“disable” is the only possible value.
#pragma clang loop pipeline_initiation_interval(number)
Set value of initiation interval for SWP
optimization to specified number value for
the next loop. Number is the positive value
greater than 0.
These pragmas could be used for debugging or reducing
compile time purposes. It is possible to disable SWP for
concrete loops to save compilation time or to find bugs
by not doing SWP to certain loops. It is possible to set
value of initiation interval to concrete number to save
compilation time by not doing extra pipeliner passes or
to check created schedule for specific initiation interval.
That is llvm part of the fix
Clang part of fix: https://reviews.llvm.org/D55710
Patch by Alexey Lapshin!
Differential Revision: https://reviews.llvm.org/D56403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351923 91177308-0d34-0410-b5e6-96231b3b80d8
Each hwasan check requires emitting a small piece of code like this:
https://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html#memory-accesses
The problem with this is that these code blocks typically bloat code
size significantly.
An obvious solution is to outline these blocks of code. In fact, this
has already been implemented under the -hwasan-instrument-with-calls
flag. However, as currently implemented this has a number of problems:
- The functions use the same calling convention as regular C functions.
This means that the backend must spill all temporary registers as
required by the platform's C calling convention, even though the
check only needs two registers on the hot path.
- The functions take the address to be checked in a fixed register,
which increases register pressure.
Both of these factors can diminish the code size effect and increase
the performance hit of -hwasan-instrument-with-calls.
The solution that this patch implements is to involve the aarch64
backend in outlining the checks. An intrinsic and pseudo-instruction
are created to represent a hwasan check. The pseudo-instruction
is register allocated like any other instruction, and we allow the
register allocator to select almost any register for the address to
check. A particular combination of (register selection, type of check)
triggers the creation in the backend of a function to handle the check
for specifically that pair. The resulting functions are deduplicated by
the linker. The pseudo-instruction (really the function) is specified
to preserve all registers except for the registers that the AAPCS
specifies may be clobbered by a call.
To measure the code size and performance effect of this change, I
took a number of measurements using Chromium for Android on aarch64,
comparing a browser with inlined checks (the baseline) against a
browser with outlined checks.
Code size: Size of .text decreases from 243897420 to 171619972 bytes,
or a 30% decrease.
Performance: Using Chromium's blink_perf.layout microbenchmarks I
measured a median performance regression of 6.24%.
The fact that a perf/size tradeoff is evident here suggests that
we might want to make the new behaviour conditional on -Os/-Oz.
But for now I've enabled it unconditionally, my reasoning being that
hwasan users typically expect a relatively large perf hit, and ~6%
isn't really adding much. We may want to revisit this decision in
the future, though.
I also tried experimenting with varying the number of registers
selectable by the hwasan check pseudo-instruction (which would result
in fewer variants being created), on the hypothesis that creating
fewer variants of the function would expose another perf/size tradeoff
by reducing icache pressure from the check functions at the cost of
register pressure. Although I did observe a code size increase with
fewer registers, I did not observe a strong correlation between the
number of registers and the performance of the resulting browser on the
microbenchmarks, so I conclude that we might as well use ~all registers
to get the maximum code size improvement. My results are below:
Regs | .text size | Perf hit
-----+------------+---------
~all | 171619972 | 6.24%
16 | 171765192 | 7.03%
8 | 172917788 | 5.82%
4 | 177054016 | 6.89%
Differential Revision: https://reviews.llvm.org/D56954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351920 91177308-0d34-0410-b5e6-96231b3b80d8
It might be a bit nicer to use the fancy .legalIf and co. predicates,
but this was requiring more boilerplate and disables the coverage
assertions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351886 91177308-0d34-0410-b5e6-96231b3b80d8
For AMDGPU the shift amount is never 64-bit, and
this needs to use a 32-bit shift.
X86 uses i8, but seemed to be hacking around this before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351882 91177308-0d34-0410-b5e6-96231b3b80d8
The existing test unintentionally shows that we have prematurely
optimized the shuffle into a vector concat and lost the undef info,
so it is not affected by a basic improvement to
SimplifyDemandedVectorElts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351834 91177308-0d34-0410-b5e6-96231b3b80d8
vecbo (insertsubv undef, X, Z), (insertsubv undef, Y, Z) --> insertsubv VecC, (vecbo X, Y), Z
This is another step in generic vector narrowing. It's also a step towards more horizontal op
formation specifically for x86 (although we still failed to match those in the affected tests).
The scalarization cases are also not optimal (we should be scalarizing those), but it's still
an improvement to use a narrower vector op when we know part of the result must be constant
because both inputs are undef in some vector lanes.
I think a similar match but checking for a constant operand might help some of the cases in
D51553.
Differential Revision: https://reviews.llvm.org/D56875
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351825 91177308-0d34-0410-b5e6-96231b3b80d8
For constant bit select patterns, replace one AND with a ANDNP, allowing us to reuse the constant mask. Only do this if the mask has multiple uses (to avoid losing load folding) or if we have XOP as its VPCMOV can handle most folding commutations.
This also requires computeKnownBitsForTargetNode support for X86ISD::ANDNP and X86ISD::FOR to prevent regressions in fabs/fcopysign patterns.
Differential Revision: https://reviews.llvm.org/D55935
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351819 91177308-0d34-0410-b5e6-96231b3b80d8
Anton Korobeynikov