It makes the types look like they're single-element structures. And
when we have instructions that *do* result in a struct, that can get
confusing rather quickly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210905 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210903 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210900 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210898 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210897 91177308-0d34-0410-b5e6-96231b3b80d8
It has exit code as 3. abort(), aka unreachable, may be handled as crash.
FIXME: Could we move this into Win32/Program.inc?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210895 91177308-0d34-0410-b5e6-96231b3b80d8
When targetting Thumb1 on a processor which has a VFP unit (which
is not accessible from Thumb1), we were converting the fastcc calling
convention to AAPCS-VFP, which is not possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210889 91177308-0d34-0410-b5e6-96231b3b80d8
CondCode actions are set with setCondCodeAction.
This should have been a harmless bug since the values seem to only
collide only with nodes that don't need to be handled, and these are
already correctly setup elsewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210888 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the cvttss2si/cvttsd2si intrinsics. Preceding
insertelement instructions are folded into the conversion instruction (if
possible).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210870 91177308-0d34-0410-b5e6-96231b3b80d8
Add branch weights to branch instructions, so that the following passes can
optimize based on it (i.e. basic block ordering).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210863 91177308-0d34-0410-b5e6-96231b3b80d8
so we can use initializer lists for the ARMSubtarget and then
use this to initialize a moved DataLayout on the subtarget from
the TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210861 91177308-0d34-0410-b5e6-96231b3b80d8
Previous algorithm for constructing [Address ranges]->[Compile Units]
mapping was wrong. It somewhat relied on the assumption that address ranges
for different compile units may not overlap. It is not so.
For example, two compile units may contain the definition of the same
linkonce_odr function. These definitions will be merged at link-time,
resulting in equivalent .debug_ranges entries for both these units
Instead of sorting and merging original address ranges (from .debug_ranges
and .debug_aranges), implement a different approach: save endpoints
of all ranges, and then use a sweep-line approach to construct
the desired mapping. If we find that certain address maps to
several compilation units, we just pick any of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210860 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds MachineMemOperands to load and store instructions. This allows
the peephole optimizer to fold load instructions. Unfortunatelly the peephole
optimizer currently doesn't run at -O0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210858 91177308-0d34-0410-b5e6-96231b3b80d8
the subtarget. Also remove unnecessary argument to the constructor
at the same time, we already have access via the subtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210844 91177308-0d34-0410-b5e6-96231b3b80d8
Enable value forwarding for loads from `calloc()` without an intervening
store.
This change extends GVN to handle the following case:
%1 = tail call noalias i8* @calloc(i64 1, i64 4)
%2 = bitcast i8* %1 to i32*
; This load is trivially constant zero
%3 = load i32* %2, align 4
This is analogous to the handling for `malloc()` in the same places.
`malloc()` returns `undef`; `calloc()` returns a zero value. Note that
it is correct to return zero even for out of bounds GEPs since the
result of such a GEP would be undefined.
Patch by Philip Reames!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210828 91177308-0d34-0410-b5e6-96231b3b80d8
Delete all unused ones, and add new AMDGPU named intrinsics for
the ones that are. Handle the old AMDIL names for comptability (although
remove their GCCBuiltin names) and add tests since there weren't any
for these before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210827 91177308-0d34-0410-b5e6-96231b3b80d8
