other operators. For the rare cases where a list type cannot be
deduced, provide a []<type> syntax, where <type> is the list element
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73078 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
- Unless I'm mistaken, these results weren't even being reported and just
served to clobber the previous build products and waste cycles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72738 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
sending data to the server.
- Otherwise if the server connection fails the external script never runs.
Also, create content before initiating connection to try and decrease time we
are connected to llvm.org.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72532 91177308-0d34-0410-b5e6-96231b3b80d8
operand is the last in a pattern. There is no
reason this should be true (although apparently
it always is right now).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72232 91177308-0d34-0410-b5e6-96231b3b80d8
- If given, the argument will be run using system with the path to the sent
data. Useful for testing nightlytest server replacements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72070 91177308-0d34-0410-b5e6-96231b3b80d8
Use it on dags and lists like this:
class decls {
string name;
}
def Decls : decls;
class B<list<string> names> : A<!foreach(Decls.name, names, !strconcat(Decls.name, ", Sr."))>;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71803 91177308-0d34-0410-b5e6-96231b3b80d8
Create an OpInit class to serve as a base for all operation Inits.
Move parsing of operation constructs to separate functions and reference
from multiple places.
Add some commented out new operations. Coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71789 91177308-0d34-0410-b5e6-96231b3b80d8
If we're resolving a list element access and we're given a VarInit,
return a new VarListElementInit referencing the VarInit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71787 91177308-0d34-0410-b5e6-96231b3b80d8
#NAME# with the name of the defm instantiating the multiclass. This is
useful for AVX instruction naming where a "V" prefix is standard
throughout the ISA. For example:
multiclass SSE_AVX_Inst<...> {
def SS : Instr<...>;
def SD : Instr<...>;
def PS : Instr<...>;
def PD : Instr<...>;
def V#NAME#SS : Instr<...>;
def V#NAME#SD : Instr<...>;
def V#NAME#PS : Instr<...>;
def V#NAME#PD : Instr<...>;
}
defm ADD : SSE_AVX_Inst<...>;
Results in
ADDSS
ADDSD
ADDPS
ADDPD
VADDSS
VADDSD
VADDPS
VADDPD
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70979 91177308-0d34-0410-b5e6-96231b3b80d8
A subclass is allowed to have a larger spill size than the superclass, and the
spill alignment must be a multiple of the superclass alignment. This causes
the following new subclass relations:
=== Alpha ===
F4RC -> F8RC
=== PPC ===
F4RC -> F8RC
=== SPU ===
R8C -> R16C -> R32C/R32FP -> R64C/R64FP -> GPRC/VECREG
=== X86 ===
FR32 -> FR64 -> VR128
RFP32 -> RFP64 -> RFP80
These subclass relations are consistent with the behaviour of -join-cross-class-copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70511 91177308-0d34-0410-b5e6-96231b3b80d8
so that it doesn't shadow the instance variable of the same name.
Make the parameter names in method declarations match the definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70502 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70225 91177308-0d34-0410-b5e6-96231b3b80d8
by base multiclasses. Do not attempt to alter defs from previous base
multiclasses. This fixes multiple multiclass inheritance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69974 91177308-0d34-0410-b5e6-96231b3b80d8
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69952 91177308-0d34-0410-b5e6-96231b3b80d8
and argument positions but only to the overloaded intrinsic parameters.
Keep a separate list of these overloaded parameters in CodeGenTarget.cpp
so they can be resolved easily. Remove assertions from IntrinsicEmitter.cpp:
they were harmless but confusing, and the assertions elsewhere in TableGen
will catch any incorrect values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69316 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68961 91177308-0d34-0410-b5e6-96231b3b80d8
in multiple classes in the case that the classes are all
in subset/superset relations. This function is used by the
fast-isel emitter, which always wants the super-most set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68957 91177308-0d34-0410-b5e6-96231b3b80d8
Note that these are distinct from TargetInstrInfo::INSERT_SUBREG
and TargetInstrInfo::EXTRACT_SUBREG, which are used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68355 91177308-0d34-0410-b5e6-96231b3b80d8
register classes. Before, MVT::Other would be returned anytime a reg was
in multiple register classes. Now, MVT::Other is only returned if the types
for those register classes differ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67714 91177308-0d34-0410-b5e6-96231b3b80d8
- Make type declarations match the struct/class keyword of the definition.
- Move AddSignalHandler into the namespace where it belongs.
- Correctly call functions from template base.
- Some other small changes.
With this patch, LLVM and Clang should build properly and with far less noise under VS2008.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67347 91177308-0d34-0410-b5e6-96231b3b80d8
in selectiondag patterns. This is required for the upcoming shuffle_vector rewrite,
and as it turns out, cleans up a hack in the Alpha instruction info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67286 91177308-0d34-0410-b5e6-96231b3b80d8
