The small utility function that pattern matches Base + Index +
Offset patterns for loads and stores fails to recognize the base
pointer for loads/stores from/into an array at offset 0 inside a
loop. As a result DAGCombiner::MergeConsecutiveStores was not able
to merge all stores.
This commit fixes the issue by adding an additional pattern match
and also a test case.
Reviewer: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188936 91177308-0d34-0410-b5e6-96231b3b80d8
def imm0_63 : Operand<i32>, ImmLeaf<i32, [{ return Imm >= 0 && Imm < 63;}]>{
As it seems Imm <63 should be Imm <= 63. ImmLeaf is used in pattern match, but there is already a function check the shift amount range, so just remove ImmLeaf. Also add a test to check 63.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188911 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM specification, "mov" is a valid mnemonic for all Thumb2 MOV encodings.
To achieve this, the patch adds one instruction alias with a special range condition to avoid collision with the Thumb1 MOV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188901 91177308-0d34-0410-b5e6-96231b3b80d8
The initial port used MLG(R) for i64 UMUL_LOHI but left the other three
combinations as not-legal-or-custom. Although 32x32->{32,32}
multiplications exist, they're not as quick as doing a normal 64-bit
multiplication, so it didn't seem like i32 SMUL_LOHI and UMUL_LOHI
would be useful. There's also no direct instruction for i64 SMUL_LOHI,
so it needs to be implemented in terms of UMUL_LOHI.
However, not defining these patterns means that we don't convert
division by a constant into multiplication, so this patch fills
in the other cases. The new i64 SMUL_LOHI sequence is simpler
than the one that we used previously for 64x64->128 multiplication,
so int-mul-08.ll now tests the full sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188898 91177308-0d34-0410-b5e6-96231b3b80d8
These are extensions of the existing FI[EDX]BR instructions, but use a spare
bit to suppress inexact conditions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188894 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LLVM would generate DWARF with version 3 in the .debug_pubname and
.debug_pubtypes version fields. This would lead SGI dwarfdump to fail
parsing the DWARF with (in the instance of .debug_pubnames) would exit
with:
dwarfdump ERROR: dwarf_get_globals: DW_DLE_PUBNAMES_VERSION_ERROR (123)
This fixes PR16950.
Reviewers: echristo, dblaikie
Reviewed By: echristo
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188869 91177308-0d34-0410-b5e6-96231b3b80d8
Update iterator when the SLP vectorizer changes the instructions in the basic
block by restarting the traversal of the basic block.
Patch by Yi Jiang!
Fixes PR 16899.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188832 91177308-0d34-0410-b5e6-96231b3b80d8
functions be compiled as mips32, without having to add attributes. This
is useful in certain situations where you don't want to have to edit the
function attributes in the source. For now it's only an option used for
the compiler developers when debugging the mips16 port.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188826 91177308-0d34-0410-b5e6-96231b3b80d8
Update testcase to be more careful about checking register
values. While regexes are general goodness for these sorts of
testcases, in this example, the registers are constrained by
the calling convention, so we can and should check their
explicit values.
rdar://14779513
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188819 91177308-0d34-0410-b5e6-96231b3b80d8
SystemZTargetLowering::emitStringWrapper() previously loaded the character
into R0 before the loop and made R0 live on entry. I'd forgotten that
allocatable registers weren't allowed to be live across blocks at this stage,
and it confused LiveVariables enough to cause a miscompilation of f3 in
memchr-02.ll.
This patch instead loads R0 in the loop and leaves LICM to hoist it
after RA. This is actually what I'd tried originally, but I went for
the manual optimisation after noticing that R0 often wasn't being hoisted.
This bug forced me to go back and look at why, now fixed as r188774.
We should also try to optimize null checks so that they test the CC result
of the SRST directly. The select between null and the SRST GPR result could
then usually be deleted as dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188779 91177308-0d34-0410-b5e6-96231b3b80d8
Post-RA LICM keeps three sets of registers: PhysRegDefs, PhysRegClobbers
and TermRegs. When it sees a definition of R it adds all aliases of R
to the corresponding set, so that when it needs to test for membership
it only needs to test a single register, rather than worrying about
aliases there too. E.g. the final candidate loop just has:
unsigned Def = Candidates[i].Def;
if (!PhysRegClobbers.test(Def) && ...) {
to test whether register Def is multiply defined.
However, there was also a shortcut in ProcessMI to make sure we didn't
add candidates if we already knew that they would fail the final test.
This shortcut was more pessimistic than the final one because it
checked whether _any alias_ of the defined register was multiply defined.
This is too conservative for targets that define register pairs.
E.g. on z, R0 and R1 are sometimes used as a pair, so there is a
128-bit register that aliases both R0 and R1. If a loop used
R0 and R1 independently, and the definition of R0 came first,
we would be able to hoist the R0 assignment (because that used
the final test quoted above) but not the R1 assignment (because
that meant we had two definitions of the paired R0/R1 register
and would fail the shortcut in ProcessMI).
This patch just uses the same check for the ProcessMI shortcut as
we use in the final candidate loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188774 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a const-pool load for virtually all 64-bit floating values.
Actually, we can get quite a few common values (including 0.0, 1.0) via "vmov"
instructions of one stripe or another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188773 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188728 91177308-0d34-0410-b5e6-96231b3b80d8
copysign/copysignf never become function calls (because the SDAG expansion code
does not lower to the corresponding function call, but rather directly
implements the associated logic), but copysignl almost always is lowered into a
call to the requested libm functon (and, thus, might clobber CTR).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188727 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix it calculating the wrong value. The struct index
is not a ConstantInt, so it was being interpreted as an array
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188713 91177308-0d34-0410-b5e6-96231b3b80d8
