Summary:
Previously we were relying on 2's complement underflow in an int64_t.
Now we cast to a uint64_t so we explicitly get the behavior we want.
Reviewers: rnk
Subscribers: dylanmckay, llvm-commits
Differential Revision: https://reviews.llvm.org/D22445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275722 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The bit width must be greater than zero, otherwise we shift by the
integer's width, which is UB. Also (more obviously) the width must be
less than or equal to the integer's width, otherwise we shift by a
negative number, which is also UB.
Reviewers: rnk
Subscribers: llvm-commits, dylanmckay
Differential Revision: https://reviews.llvm.org/D22442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously we were doing 1 << S. "1" is an int, so this doesn't work
when S >= 32.
This patch also adds some static_asserts to these functions to ensure
that we don't hit UB by shifting left too much.
Reviewers: rnk
Subscribers: llvm-commits, dylanmckay
Differential Revision: https://reviews.llvm.org/D22441
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275719 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275707 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This shift is undefined behavior (and, as compiled by clang, gives the
wrong answer for maxUIntN(64)).
Reviewers: mkuper
Subscribers: llvm-commits, jroelofs, rsmith
Differential Revision: https://reviews.llvm.org/D22430
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275656 91177308-0d34-0410-b5e6-96231b3b80d8
There was a missing "<" on a line, so its contents wrapped around into
the description of the next argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275638 91177308-0d34-0410-b5e6-96231b3b80d8
The same value for EM_BPF is being propagated to glibc,
elfutils, and binutils.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275633 91177308-0d34-0410-b5e6-96231b3b80d8
Block 1 and 2 of an MSF file are bit vectors that represent the
list of blocks allocated and free in the file. We had been using
these blocks to write stream data and other data, so we mark them
as the free page map now. We don't yet serialize these pages to
the disk, but at least we make a note of what it is, and avoid
writing random data to them.
Doing this also necessitated cleaning up some of the tests to be
more general and hardcode fewer values, which is nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275629 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read a PDB, then write some of it back out,
but write the directory, super block, and other pertinent metadata
back out unchanged. This generates incorrect PDBs since the amount
of data written was not always the same as the amount of data read.
This patch changes things to use the newly introduced `MsfBuilder`
class to write out a correct and accurate set of Msf metadata for
the data *actually* written, which opens up the door for adding and
removing type records, symbol records, and other types of data to
an existing PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275627 91177308-0d34-0410-b5e6-96231b3b80d8
Mesa still has a use of llvm.AMDGPU.rsq.f64 remaining.
Also fix mismatch with non-IEEE rsq selecting to IEEE rsq.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275617 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When a pass tries to keep LCSSA form it's often convenient to be able to update
LCSSA for a set of instructions rather than for the entire loop. This patch makes the
processInstruction from LCSSA externally available under a name
formLCSSAForInstruction.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22378
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275613 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an incomplete anders-style implementation for CFLAA. It's
incomplete in that it's missing interprocedural analysis, attrs
handling, etc. and that it needs more tests. More tests and features
will be added in future commits.
Patch by Jia Chen.
Differential Revision: https://reviews.llvm.org/D22291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275602 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275592 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first set of changes implementing the RFC from
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
This is a cross-sectional patch; rather than implementing the hotness
attribute for all optimization remarks and all passes in a patch set, it
implements it for the 'missed-optimization' remark for Loop
Distribution. My goal is to shake out the design issues before scaling
it up to other types and passes.
Hotness is computed as an integer as the multiplication of the block
frequency with the function entry count. It's only printed in opt
currently since clang prints the diagnostic fields directly. E.g.:
remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300)
A new API added is similar to emitOptimizationRemarkMissed. The
difference is that it additionally takes a code region that the
diagnostic corresponds to. From this, hotness is computed using BFI.
The new API is exposed via an analysis pass so that it can be made
dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.)
This feature can all be enabled by setDiagnosticHotnessRequested in the
LLVM context. If this is off, LazyBFI is not calculated (D22141) so
there should be no overhead.
A new command-line option is added to turn this on in opt.
My plan is to switch all user of emitOptimizationRemark* to use this
module instead.
Reviewers: hfinkel
Subscribers: rcox2, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275583 91177308-0d34-0410-b5e6-96231b3b80d8
Calling getModRefInfo with a fence resulted in crashes because fences
don't have a memory location. Add a new predicate to Instruction
called isFenceLike which indicates that the instruction mutates memory
but not any single memory location in particular. In practice, it is a
proxy for the set of instructions which "mayWriteToMemory" but cannot be
used with MemoryLocation::get.
This fixes PR28570.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275581 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Convert LoopInstSimplify to new PM. Unfortunately there is no exisiting unittest for this pass.
Reviewers: davidxl, silvas
Subscribers: silvas, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D22280
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275576 91177308-0d34-0410-b5e6-96231b3b80d8
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275561 91177308-0d34-0410-b5e6-96231b3b80d8
As suggested by Rafael in review of D22079 - this was accidentally left out of
the final commit (r275316).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275469 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Make the target-specific flags in MachineMemOperand::Flags real, bona
fide enum values. This simplifies users, prevents various constants
from going out of sync, and avoids the false sense of security provided
by declaring static members in classes and then forgetting to define
them inside of cpp files.
Reviewers: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22372
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275451 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Give it a shorter name (because we're going to refer to it often from
SelectionDAG and friends).
- Split the flags and alignment into separate variables.
- Specialize FlagsEnumTraits for it, so we can do bitwise ops on it
without losing type information.
- Make some enum values constants in MachineMemOperand instead.
MOMaxBits should not be a valid Flag.
- Simplify some of the bitwise ops for dealing with Flags.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275438 91177308-0d34-0410-b5e6-96231b3b80d8
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275401 91177308-0d34-0410-b5e6-96231b3b80d8
constant hoisting. It not only takes into account the number of uses and the
cost of expressions in which constants appear, but now also the resulting
integer range of the offsets. Thus, the algorithm maximizes the number of uses
within an integer range that will enable more efficient code generation. On
ARM, for example, this will enable code size optimisations because less
negative offsets will be created. Negative offsets/immediates are not supported
by Thumb1 thus preventing more compact instruction encoding.
Differential Revision: http://reviews.llvm.org/D21183
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275382 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275367 91177308-0d34-0410-b5e6-96231b3b80d8
This adds Clang-specific DWARF constants for nullability and ObjC
class properties that are already generated by clang. This patch adds
dwarfdump support and a more comprehensive testcase.
<rdar://problem/27335745>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275354 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid exposing a cl::opt in a public header and instead promote this
option in the API.
Alternatively, we could land the cl::opt in CommandFlags.h so that
it is available to every tool, but we would still have to find an
option for clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275348 91177308-0d34-0410-b5e6-96231b3b80d8
