Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332669 91177308-0d34-0410-b5e6-96231b3b80d8
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332664 91177308-0d34-0410-b5e6-96231b3b80d8
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330208 91177308-0d34-0410-b5e6-96231b3b80d8
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328812 91177308-0d34-0410-b5e6-96231b3b80d8
Since the local hash is a different number of bytes depending
on host architecture, we don't have a consistent value. I
will need to re-do this test for both x86 and x64. For now
it accepts any value for the local hash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319864 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312276 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for dumping a summary of module symbols
and CodeView debug chunks. This option prints a table for
each module of all of the symbols that occurred in the module
and the number of times it occurred and total byte size. Then
at the end it prints the totals for the entire file.
Additionally, this patch adds the -jmc (just my code) option,
which suppresses modules which are from external libraries or
linker imports, so that you can focus only on the object files
and libraries that originate from your own source code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311338 91177308-0d34-0410-b5e6-96231b3b80d8
The %T lit expansion expands to a common directory shared between all the tests in the same directory, which is unexpected and unintuitive, and more importantly, it's been a source of subtle race conditions and flaky tests. In https://reviews.llvm.org/D35396, it was agreed that it would be best to simply ban %T and only keep %t, which is unique to each test. When a test needs a temporary directory, it can just create one using mkdir %t.
This patch removes %T in llvm.
Differential Revision: https://reviews.llvm.org/D36495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310953 91177308-0d34-0410-b5e6-96231b3b80d8
These were pending in a separate patch but I forgot to squash them
before comitting, and this one didn't go through.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310764 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason I didn't see this failure the first time. The
output format changed slightly, so we just have to update the
test for the new format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310442 91177308-0d34-0410-b5e6-96231b3b80d8
This extends the native reader to enable llvm-pdbutil to list the enums in a
PDB and it includes a simple test. It does not yet list the values in the
enumerations, which requires an actual implementation of
NativeEnumSymbol::FindChildren.
To exercise this code, use a command like:
llvm-pdbutil pretty -native -enums foo.pdb
Differential Revision: https://reviews.llvm.org/D35738
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310144 91177308-0d34-0410-b5e6-96231b3b80d8
Image section headers are stored in the DBI stream, but we
had no way to dump them. This patch adds dumping support,
along with some tests that LLD actually dumps them correctly.
Differential Revision: https://reviews.llvm.org/D36332
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310107 91177308-0d34-0410-b5e6-96231b3b80d8
The PDB reserves certain blocks for the FPM that describe which
blocks in the file are allocated and which are free. We weren't
filling that out at all, and in some cases we were even stomping
it with incorrect data. This patch writes a correct FPM.
Differential Revision: https://reviews.llvm.org/D36235
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309896 91177308-0d34-0410-b5e6-96231b3b80d8
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309894 91177308-0d34-0410-b5e6-96231b3b80d8
The PDB "symbol stream" actually contains symbol records for the publics
and the globals stream. The globals and publics streams are essentially
hash tables that point into a single stream of records. In order to
match cvdump's behavior, we need to only dump symbol records referenced
from the hash table. This patch implements that, and then implements
global stream dumping, since it's just a subset of public stream
dumping.
Now we shouldn't see S_PROCREF or S_GDATA32 records when dumping
publics, and instead we should see those record in the globals stream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309066 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This removes the CVTypeVisitor updater and verifier classes. They were
made dead by the minimal type dumping refactoring. Replace them with a
single function that takes a type record and produces a hash. Call this
from the minimal type dumper and compare the hash.
I also noticed that the microsoft-pdb reference repository uses a basic
CRC32 for records that aren't special. We already have an implementation
of that CRC ready to use, because it's used in COFF for ICF.
I'll make LLD call this hashing utility in a follow-up change. We might
also consider using this same hash in type stream merging, so that we
don't have to hash our records twice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308240 91177308-0d34-0410-b5e6-96231b3b80d8
Based strictly on the name, this seems to have something to do
width edit & continue. The goal of this patch has nothing to do
with supporting edit and continue though. msvc link.exe writes
very basic information into this area even when *not* compiling
with support for E&C, and so the goal here is to bring lld-link
to parity. Since we cannot know what assumptions standard tools
make about the content of PDB files, we need to be as close as
possible.
This ECNames data structure is a standard PDB string hash table.
link.exe puts a single string into this hash table, which is the
full path to the PDB file on disk. It then references this string
from the module descriptor for the compiler generated `* Linker *`
module.
With this patch, lld-link will generate the exact same sequence of
bytes as MSVC link for this subsection for a given object file
input (as reported by `llvm-pdbutil bytes -ec`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307356 91177308-0d34-0410-b5e6-96231b3b80d8
We had a lot of one-off tests for this type and that type,
or "every type that happens to be generated by this program
I built". Eventually I got a bug report filed where we were
crashing on a type that was not covered by any of these tests.
So this test carefully constructs a minimal C++ program that
will cause every type we support to be emitted. This ensures
full coverage for type records.
Differential Revision: https://reviews.llvm.org/D34915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307187 91177308-0d34-0410-b5e6-96231b3b80d8
Type records have a unique type index, but symbol records do
not. Instead, symbol records refer to other symbol records
by referencing their offset in the symbol stream. In a sense
this is the analogue of the TypeIndex, but we are not printing
it in the dumper. Printing it not only gives us more useful
information when manually investigating the contents of a PDB,
but also allows us to write better tests by enabling us to
verify that fields that reference other symbol records do
so correctly.
Differential Revision: https://reviews.llvm.org/D34906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306890 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful when you want to look at a specific chunk of a
stream or look for discontinuities, and you need to know the
list of blocks occupied by a stream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306150 91177308-0d34-0410-b5e6-96231b3b80d8
This patch dumps the raw bytes of the pdb name map which contains
the mapping of stream name to stream index for the string table
and other reserved streams.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306148 91177308-0d34-0410-b5e6-96231b3b80d8
Normally we can only make sense of the content of a PDB in terms
of streams and blocks, but in some cases it may be useful to dump
bytes at a specific absolute file offset. For example, if you
know that some interesting data is at a particular location and
you want to see some surrounding data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306146 91177308-0d34-0410-b5e6-96231b3b80d8
The goal here is to make it possible to display absolute
file offsets when dumping byets from an MSF. The problem is
that when dumping bytes from an MSF, often the bytes will
cross a block boundary and encounter a discontinuity. We
can't use the normal formatBinary() function for this because
this would just treat the sequence as entirely ascending, and
not account out-of-order blocks.
This patch adds a formatMsfData() function to our printer, and
then uses this function to improve the output of the -stream-data
command line option for dumping bytes from a particular stream.
Test coverage is also expanded to make sure to include all possible
scenarios of offsets, sizes, and crossing block boundaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306141 91177308-0d34-0410-b5e6-96231b3b80d8
This idea originally came about when I was doing some deep
investigation of why certain bytes in a PDB that we round-tripped
differed from their original bytes in the source PDB. I found
myself having to hack up the code in many places to dump the
bytes of this substream, or that record. It would be nice if
we could just do this for every possible stream, substream,
debug chunk type, etc.
It doesn't make sense to put this under dump because there's just
so many options that would detract from the more common use case
of just dumping deserialized records. So making a new subcommand
seems like the most logical course of action. In doing so, we
already have two command line options that are suitable for this
new subcommand, so start out by moving them there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306056 91177308-0d34-0410-b5e6-96231b3b80d8
Now you run llvm-pdbutil dump <options>. This is a followup
after having renamed the tool, whereas before raw was obviously
just the style of dumping, whereas now "dump" is the action to
perform with the "util".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306055 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes a bug where we always treat APSInts in Codeview as
signed when writing them to YAML. One symptom of this problem is that
llvm-pdbdump raw would show Enumerator Values that differ between the
original PDB and a PDB that has been round-tripped through YAML.
Reviewers: zturner
Reviewed By: zturner
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305965 91177308-0d34-0410-b5e6-96231b3b80d8
We forgot to serialize these because llvm-readobj didn't dump them. They
are typically all zeros in an object file. The linker fills them in with
relocations before adding them to the PDB. Now we can properly round
trip these symbols through pdb2yaml -> yaml2pdb.
I made these fields optional with a zero default so that we can elide
them from our test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305857 91177308-0d34-0410-b5e6-96231b3b80d8
This was regressed in a previous patch that re-wrote the dumper,
and I'm incrementally adding back the pieces that are missing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305524 91177308-0d34-0410-b5e6-96231b3b80d8
This resubmits commit c0c249e9f2ef83e1d1e5f166b50673d92f3579d7.
It was broken due to some weird template issues, which have
since been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305517 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 83ea17ebf2106859a51fbc2a86031b44d33696ad.
This is failing due to some strange template problems, so reverting
until it can be straightened out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305505 91177308-0d34-0410-b5e6-96231b3b80d8
After some internal discussions, we agreed that the raw output style had
outlived its usefulness. It was originally created before we had even
thought of dumping to YAML, and it was intended to give us some insight
into the internals of a PDB file. Now we have YAML mode which does
almost exactly this but is more powerful in that it can round-trip back
to a PDB, which the raw mode could not do. So the raw mode had become
purely a maintenance burden.
One option was to just delete it. However, its original goal was to be
as readable as possible while staying close to the "metal" - i.e.
presenting the output in a way that maps directly to the underlying file
format. We don't actually need that last requirement anymore since it's
covered by the yaml mode, so we could repurpose "raw" mode to actually
just be as readable as possible.
This patch implements about 80% of the functionality previously in raw
mode, but in a completely different style that is more akin to what
cvdump outputs. Records are very compressed, often times appearing on
just one line. One nice thing about this is that it makes full record
matching easier, because you can grep for indices, names, and leaf types
on a single line often.
See the tests for some examples of what the new output looks like.
Note that this patch actually regresses the functionality of raw mode in
a few areas, but only because the patch was already unreasonably large
and going 100% would have been even worse. Specifically, this patch is
missing:
The ability to dump module debug subsections (checksums, lines, etc)
The ability to dump section headers
Aside from that everything is here. While goign through the tests fixing
them all up, I found many duplicate tests. They've been deleted. In
subsequent patches I will go through and re-add the missing
functionality.
Differential Revision: https://reviews.llvm.org/D34191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305495 91177308-0d34-0410-b5e6-96231b3b80d8
