Summary:
Update segmented-stacks*.ll tests with x32 target case and make
corresponding changes to make them pass.
Test Plan: tests updated with x32 target
Reviewers: nadav, rafael, dschuff
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218247 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: getSubroutineName is currently only used by llvm-symbolizer, thus add a binary test containing a cross-cu inlining example.
Reviewers: samsonov, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218245 91177308-0d34-0410-b5e6-96231b3b80d8
The PSHUFB mask decode routine used to assert if the mask index was out of
range (<0 or greater than the size of the vector). The problem is, we can
legitimately have a PSHUFB with a large index using intrinsics. The
instruction only uses the least significant 4 bits. This change removes the
assert and masks the index to match the instruction behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218242 91177308-0d34-0410-b5e6-96231b3b80d8
We currently emit an error when trying to assemble a file with more
than one section using DWARF2 debug info. This should be a warning
instead, as the resulting file will still be usable, but with a
degraded debug illusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218241 91177308-0d34-0410-b5e6-96231b3b80d8
As of July 2014, all backends have been updated to implement
AtomicRMWInst::Nand as ~(x & y) (and not as x & ~y, as some did previously).
This was added to the release notes in r212635 (and the LangRef had been
changed), but it seems that we forgot to update the header-file description.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218236 91177308-0d34-0410-b5e6-96231b3b80d8
Increasingly I don't want to mix the integer and floating point tests,
especially with AVX where they are handled quite differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218233 91177308-0d34-0410-b5e6-96231b3b80d8
for LVI algorithm. For a specific value to be lowered, when the number of basic
blocks being checked for overdefined lattice value is larger than
lvi-overdefined-BB-threshold, or the times of encountering overdefined value
for a single basic block is larger than lvi-overdefined-threshold, the LVI
algorithm will stop further lowering the lattice value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218231 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation of the callback in clang's Sema will return an
internal name for labels.
Test Plan: Will be tested in clang.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218229 91177308-0d34-0410-b5e6-96231b3b80d8
a more sane approach to AVX2 support.
Fundamentally, there is no useful way to lower integer vectors in AVX.
None. We always end up with a VINSERTF128 in the end, so we might as
well eagerly switch to the floating point domain and do everything
there. This cleans up lots of weird and unlikely to be correct
differences between integer and floating point shuffles when we only
have AVX1.
The other nice consequence is that by doing things this way we will make
it much easier to write the integer lowering routines as we won't need
to duplicate the logic to check for AVX vs. AVX2 in each one -- if we
actually try to lower a 256-bit vector as an integer vector, we have
AVX2 and can rely on it. I think this will make the code much simpler
and more comprehensible.
Currently, I've disabled *all* support for AVX2 so that we always fall
back to AVX. This keeps everything working rather than asserting. That
will go away with the subsequent series of patches that provide
a baseline AVX2 implementation.
Please note, I'm going to implement AVX2 *without access to hardware*.
That means I cannot correctness test this path. I will be relying on
those with access to AVX2 hardware to do correctness testing and fix
bugs here, but as a courtesy I'm trying to sketch out the framework for
the new-style vector shuffle lowering in the context of the AVX2 ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218228 91177308-0d34-0410-b5e6-96231b3b80d8
input v8f32 shuffles which are not 128-bit lane crossing but have
different shuffle patterns in the low and high lanes. This removes most
of the extract/insert traffic that was unnecessary and is particularly
good at lowering cases where only one of the two lanes is shuffled at
all.
I've also added a collection of test cases with undef lanes because this
lowering is somewhat more sensitive to undef lanes than others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218226 91177308-0d34-0410-b5e6-96231b3b80d8
in the high and low 128-bit lanes of a v8f32 vector.
No functionality change yet, but wanted to set up the baseline for my
next patch which will make these quite a bit better. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218224 91177308-0d34-0410-b5e6-96231b3b80d8
This is purely a plumbing patch. No functional changes intended.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
The first step is to add a target hook for RSQRTE, take the already target-independent code selfishly hoarded by PPC, and put it into DAGCombiner.
Next steps:
The code in DAGCombiner::BuildRSQRTE() should be refactored further; tests that exercise that logic need to be added.
Logic in PPCTargetLowering::BuildRSQRTE() should be hoisted into DAGCombiner.
X86 and AArch64 overrides for TargetLowering.BuildRSQRTE() should be added.
Differential Revision: http://reviews.llvm.org/D5425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218219 91177308-0d34-0410-b5e6-96231b3b80d8
the new vector shuffle lowering no longer needs to check both symmetric
forms of UNPCK patterns for v4f64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218217 91177308-0d34-0410-b5e6-96231b3b80d8
lowering when it can use a symmetric SHUFPS across both 128-bit lanes.
This required making the SHUFPS lowering tolerant of other vector types,
and adjusting our canonicalization to canonicalize harder.
This is the last of the clever uses of symmetry I've thought of for
v8f32. The rest of the tricks I'm aware of here are to work around
assymetry in the mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218216 91177308-0d34-0410-b5e6-96231b3b80d8
a generic vector shuffle mask into a helper that isn't specific to the
other things that influence which choice is made or the specific types
used with the instruction.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218215 91177308-0d34-0410-b5e6-96231b3b80d8
of a single element into a zero vector for v4f64 and v4i64 in AVX.
Ironically, there is less to see here because xor+blend is so crazy fast
that we can't really beat that to zero the high 128-bit lane.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218214 91177308-0d34-0410-b5e6-96231b3b80d8
UNPCKHPS with AVX vectors by recognizing those patterns when they are
repeated for both 128-bit lanes.
With this, we now generate the exact same (really nice) code for
Quentin's avx_test_case.ll which was the most significant regression
reported for the new shuffle lowering. In fact, I'm out of specific test
cases for AVX lowering, the rest were AVX2 I think. However, there are
a bunch of pretty obvious remaining things to improve with AVX...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218213 91177308-0d34-0410-b5e6-96231b3b80d8
important bits of cleverness: to detect and lower repeated shuffle
patterns between the two 128-bit lanes with a single instruction.
This patch just teaches it how to lower single-input shuffles that fit
this model using VPERMILPS. =] There is more that needs to happen here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218211 91177308-0d34-0410-b5e6-96231b3b80d8
generating the test cases to format things more consistently and
actually catch all the operand sequences that should be elided in favor
of the asm comments. No actual changes here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218210 91177308-0d34-0410-b5e6-96231b3b80d8
v8f32 shuffles in the new vector shuffle lowering code.
This is very cheap to do and makes it much more clear that anything more
expensive but overlapping with this lowering should be selected
afterward (for example using AVX2's VPERMPS). However, no functionality
changed here as without this code we would fall through to create no-op
shuffles of each input and a blend. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218209 91177308-0d34-0410-b5e6-96231b3b80d8
VBLENDPD over using VSHUFPD. While the 256-bit variant of VBLENDPD slows
down to the same speed as VSHUFPD on Sandy Bridge CPUs, it has twice the
reciprocal throughput on Ivy Bridge CPUs much like it does everywhere
for 128-bits. There isn't a downside, so just eagerly use this
instruction when it suffices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218208 91177308-0d34-0410-b5e6-96231b3b80d8
This expands the integer cases to cover the fact that AVX2 moves their
lane-crossing shuffles into the integer domain. It also adds proper
support for AVX2 run lines and the "ALL" group when it doesn't matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218206 91177308-0d34-0410-b5e6-96231b3b80d8
awkward conditions. The readability improvement of this will be even
more important as I generalize it to handle more types.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218205 91177308-0d34-0410-b5e6-96231b3b80d8
128-bit lane crossings, not 'half' crossings. This came up in code
review ages ago, but I hadn't really addresesd it. Also added some
documentation for the helper.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218203 91177308-0d34-0410-b5e6-96231b3b80d8
actual support for complex AVX shuffling tricks. We can do independent
blends of the low and high 128-bit lanes of an avx vector, so shuffle
the inputs into place and then do the blend at 256 bits. This will in
many cases remove one blend instruction.
The next step is to permute the low and high halves in-place rather than
extracting them and re-inserting them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218202 91177308-0d34-0410-b5e6-96231b3b80d8
link.exe:
Fuzz testing has shown that COMMON symbols with size > 32 will always
have an alignment of at least 32 and all symbols with size < 32 will
have an alignment of at least the largest power of 2 less than the size
of the symbol.
binutils:
The BFD linker essentially work like the link.exe behavior but with
alignment 4 instead of 32. The BFD linker also supports an extension to
COFF which adds an -aligncomm argument to the .drectve section which
permits specifying a precise alignment for a variable but MC currently
doesn't support editing .drectve in this way.
With all of this in mind, we decide to play a little trick: we can
ensure that the alignment will be respected by bumping the size of the
global to it's alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218201 91177308-0d34-0410-b5e6-96231b3b80d8
under AVX.
This really just documents the current state of the world. I'm going to
try to flesh it out to cover any test cases I plan to improve prior to
improving them so that the delta made by changes is actually visible to
code reviewers.
This is made easier by the fact that I now have a script to automate the
process of producing test cases including the check lines. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218199 91177308-0d34-0410-b5e6-96231b3b80d8
single-input shuffles with doubles. This allows them to fold memory
operands into the shuffle, etc. This is just the analog to the v4f32
case in my prior commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218193 91177308-0d34-0410-b5e6-96231b3b80d8
instruction for single-vector floating point shuffles. This in turn
allows the shuffles to fold a load into the instruction which is one of
the common regressions hit with the new shuffle lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218190 91177308-0d34-0410-b5e6-96231b3b80d8
We had a few bugs:
- We were considering the GVKind instead of just looking at the section
characteristics
- We would never print out 'y' when a section was meant to be unreadable
- We would never print out 's' when a section was meant to be shared
- We translated IMAGE_SCN_MEM_DISCARDABLE to 'n' when it should've meant
IMAGE_SCN_LNK_REMOVE
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218189 91177308-0d34-0410-b5e6-96231b3b80d8
duplication of check lines. The idea is to have broad sets of
compilation modes that will frequently diverge without having to always
and immediately explode to the precise ISA feature set.
While this already helps due to VEX encoded differences, it will help
much more as I teach the new shuffle lowering about more of the new VEX
encoded instructions which can still be used to implement 128-bit
shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218188 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies RTDyldMemoryManager::getSymbolAddress(Name)'s behavior to
make it consistent with how clients are using it: Name should be mangled, and
getSymbolAddress should demangle it on the caller's behalf before looking the
name up in the process. This patch also fixes the one client
(MCJIT::getPointerToFunction) that had been passing unmangled names (by having
it pass mangled names instead).
Background:
RTDyldMemoryManager::getSymbolAddress(Name) has always used a re-try mechanism
when looking up symbol names in the current process. Prior to this patch
getSymbolAddress first tried to look up 'Name' exactly as the user passed it in
and then, if that failed, tried to demangle 'Name' and re-try the look up. The
implication of this behavior is that getSymbolAddress expected to be called with
unmangled names, and that handling mangled names was a fallback for convenience.
This is inconsistent with how clients (particularly the RuntimeDyldImpl
subclasses, but also MCJIT) usually use this API. Most clients pass in mangled
names, and succeed only because of the fallback case. For clients passing in
mangled names, getSymbolAddress's old behavior was actually dangerous, as it
could cause unmangled names in the process to shadow mangled names being looked
up.
For example, consider:
foo.c:
int _x = 7;
int x() { return _x; }
foo.o:
000000000000000c D __x
0000000000000000 T _x
If foo.c becomes part of the process (E.g. via dlopen("libfoo.dylib")) it will
add symbols 'x' (the function) and '_x' (the variable) to the process. However
jit clients looking for the function 'x' will be using the mangled function name
'_x' (note how function 'x' appears in foo.o). When getSymbolAddress goes
looking for '_x' it will find the variable instead, and return its address and
in place of the function, leading to JIT'd code calling the variable and
crashing (if we're lucky).
By requiring that getSymbolAddress be called with mangled names, and demangling
only when we're about to do a lookup in the process, the new behavior
implemented in this patch should eliminate any chance of names being shadowed
during lookup.
There's no good way to test this at the moment: This issue only arrises when
looking up process symbols (not JIT'd symbols). Any test case would have to
generate a platform-appropriate dylib to pass to llvm-rtdyld, and I'm not
aware of any in-tree tool for doing this in a portable way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218187 91177308-0d34-0410-b5e6-96231b3b80d8
This splits the logic for actually looking up coverage information
from the logic that displays it. These were tangled rather thoroughly
so this change is a bit large, but it mostly consists of moving things
around. The coverage lookup logic itself now lives in the library,
rather than being spread between the library and the tool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218184 91177308-0d34-0410-b5e6-96231b3b80d8
This debug output is really for testing CoverageMappingReader, not the
llvm-cov tool. Move it to where it can be more useful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218183 91177308-0d34-0410-b5e6-96231b3b80d8
